Oops! I've copied r7557 instead of r7757, sorry

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7799 3c298f89-4303-0410-b956-a3cf2f4a3e73

11 files changed, 0 insertions, 411 deletions

diff --git a/target/linux/adm5120-2.6/patches/001-adm5120.patch b/target/linux/adm5120-2.6/patches/001-adm5120.patch
deleted file mode 100644
index 70129373f8..0000000000
--- a/target/linux/adm5120-2.6/patches/001-adm5120.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-diff -urN linux-2.6.19.2/arch/mips/Kconfig linux-2.6.19.2.new/arch/mips/Kconfig
---- linux-2.6.19.2/arch/mips/Kconfig	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.new/arch/mips/Kconfig	2007-01-23 14:49:38.000000000 +0100
-@@ -12,6 +12,21 @@
- 	prompt "System type"
- 	default SGI_IP22
-
-+config MIPS_ADM5120
-+	bool "Support for ADM5120 SoC"
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select SYS_SUPPORTS_LITTLE_ENDIAN
-+	select SYS_SUPPORTS_BIG_ENDIAN
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select GENERIC_GPIO
-+
-+config PCI_ADM5120
-+	bool "Add PCI control support for ADM5120"
-+	depends on MIPS_ADM5120 && PCI
-+
- config MIPS_MTX1
- 	bool "4G Systems MTX-1 board"
- 	select DMA_NONCOHERENT
-diff -urN linux-2.6.19.2/arch/mips/Makefile linux-2.6.19.2.new/arch/mips/Makefile
---- linux-2.6.19.2/arch/mips/Makefile	2007-01-23 14:02:57.000000000 +0100
-+++ linux-2.6.19.2.new/arch/mips/Makefile	2007-01-23 14:49:39.000000000 +0100
-@@ -165,6 +165,14 @@
- load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
-
- #
-+# ADMtek 5120
-+#
-+
-+core-$(CONFIG_MIPS_ADM5120)	+= arch/mips/adm5120/
-+cflags-$(CONFIG_MIPS_ADM5120)	+= -Iinclude/asm-mips/mach-adm5120
-+load-$(CONFIG_MIPS_ADM5120)	+= 0xffffffff80001000
-+
-+#
- # Common Alchemy Au1x00 stuff
- #
- core-$(CONFIG_SOC_AU1X00)	+= arch/mips/au1000/common/
-diff -urN linux-2.6.19.2/include/asm-mips/bootinfo.h linux-2.6.19.2.new/include/asm-mips/bootinfo.h
---- linux-2.6.19.2/include/asm-mips/bootinfo.h	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.new/include/asm-mips/bootinfo.h	2007-01-23 14:49:40.000000000 +0100
-@@ -212,6 +212,42 @@
- #define MACH_GROUP_NEC_EMMA2RH 25	/* NEC EMMA2RH (was 23)		*/
- #define  MACH_NEC_MARKEINS	0	/* NEC EMMA2RH Mark-eins	*/
-
-+/*
-+ * Valid machtype for group ADMtek ADM5120
-+ */
-+#define MACH_GROUP_ADM5120	23
-+#define MACH_ADM5120_UNKNOWN	0	/* Unknown board */
-+#define MACH_ADM5120_WP54G_WRT	1	/* Compex WP54G-WRT */
-+#define MACH_ADM5120_WP54G	2	/* Compex WP54G */
-+#define MACH_ADM5120_WP54AG	3	/* Compex WP54AG */
-+#define MACH_ADM5120_WPP54G	4	/* Compex WPP54G */
-+#define MACH_ADM5120_WPP54AG	5	/* Compex WPP54AG */
-+#define MACH_ADM5120_NP28G	6	/* Compex NP28G */
-+#define MACH_ADM5120_NP28GHS	7	/* Compex NP28G HotSpot */
-+#define MACH_ADM5120_NP27G	8	/* Compex NP27G */
-+#define MACH_ADM5120_WP54Gv1C	9	/* Compex WP54G version 1C */
-+#define MACH_ADM5120_RB_111	10	/* Mikrotik RouterBOARD 111 */
-+#define MACH_ADM5120_RB_112	11	/* Mikrotik RouterBOARD 112 */
-+#define MACH_ADM5120_RB_133	12	/* Mikrotik RouterBOARD 133 */
-+#define MACH_ADM5120_RB_133C	13	/* Mikrotik RouterBOARD 133c */
-+#define MACH_ADM5120_RB_150	14	/* Mikrotik RouterBOARD 150 */
-+#define MACH_ADM5120_RB_153	15	/* Mikrotik RouterBOARD 153 */
-+#define MACH_ADM5120_HS100	16	/* ZyXEL HomeSafe 100/100W */
-+#define MACH_ADM5120_P334	17	/* ZyXEL Prestige 334 */
-+#define MACH_ADM5120_P334U	18	/* ZyXEL Prestige 334U */
-+#define MACH_ADM5120_P334W	19	/* ZyXEL Prestige 334W */
-+#define MACH_ADM5120_P334WH	20	/* ZyXEL Prestige 334WH */
-+#define MACH_ADM5120_P334WHD	21	/* ZyXEL Prestige 334WHD */
-+#define MACH_ADM5120_P334WT	22	/* ZyXEL Prestige 334WT */
-+#define MACH_ADM5120_P335	23	/* ZyXEL Prestige 335/335WT */
-+#define MACH_ADM5120_P335PLUS	24	/* ZyXEL Prestige 335Plus */
-+#define MACH_ADM5120_P335U	25	/* ZyXEL Prestige 335U */
-+#define MACH_ADM5120_ES2108	26	/* ZyXEL Ethernet Switch 2108 */
-+#define MACH_ADM5120_ES2108F	27	/* ZyXEL Ethernet Switch 2108-F */
-+#define MACH_ADM5120_ES2108G	28	/* ZyXEL Ethernet Switch 2108-G */
-+#define MACH_ADM5120_ES2108LC	29	/* ZyXEL Ethernet Switch 2108-LC */
-+#define MACH_ADM5120_ES2108PWR	30	/* ZyXEL Ethernet Switch 2108-PWR */
-+
- #define CL_SIZE			COMMAND_LINE_SIZE
-
- const char *get_system_type(void);
diff --git a/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch b/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch
deleted file mode 100644
index 503a49567c..0000000000
--- a/target/linux/adm5120-2.6/patches/002-adm5120_flash.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-diff -urN linux-2.6.19.2/drivers/mtd/maps/Kconfig linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig
---- linux-2.6.19.2/drivers/mtd/maps/Kconfig	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig	2007-01-23 01:13:39.000000000 +0100
-@@ -622,5 +622,10 @@
- 
- 	  This selection automatically selects the map_ram driver.
- 
-+config MTD_ADM5120
-+	tristate "Map driver for ADMtek ADM5120 boards"
-+	depends on MIPS_ADM5120
-+	select MTD_CFI_AMDSTD
-+
- endmenu
- 
-diff -urN linux-2.6.19.2/drivers/mtd/maps/Makefile linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile
---- linux-2.6.19.2/drivers/mtd/maps/Makefile	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile	2007-01-23 01:20:52.000000000 +0100
-@@ -43,6 +43,7 @@
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)		+= pci.o
- obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
-+obj-$(CONFIG_MTD_ADM5120)      	+= adm5120_mtd.o
- obj-$(CONFIG_MTD_LASAT)		+= lasat.o
- obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
diff --git a/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch b/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch
deleted file mode 100644
index f6fec30bca..0000000000
--- a/target/linux/adm5120-2.6/patches/003-adm5120_switch.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-diff -urN linux-2.6.19.2/drivers/net/Kconfig linux-2.6.19.2-adm5120/drivers/net/Kconfig
---- linux-2.6.19.2/drivers/net/Kconfig	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/net/Kconfig	2007-01-23 01:13:39.000000000 +0100
-@@ -450,6 +450,10 @@
- 	  If you have an Alchemy Semi AU1X00 based system
- 	  say Y.  Otherwise, say N.
- 
-+config MIPS_ADM5120_ENET
-+	tristate "MIPS ADM5120 Ethernet switch support"
-+	depends on NET_ETHERNET && MIPS_ADM5120
-+
- config NET_SB1250_MAC
- 	tristate "SB1250 Ethernet support"
- 	depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
-diff -urN linux-2.6.19.2/drivers/net/Makefile linux-2.6.19.2-adm5120/drivers/net/Makefile
---- linux-2.6.19.2/drivers/net/Makefile	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/net/Makefile	2007-01-23 01:13:39.000000000 +0100
-@@ -164,6 +164,7 @@
- # This is also a 82596 and should probably be merged
- obj-$(CONFIG_LP486E) += lp486e.o
- 
-+obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o
- obj-$(CONFIG_ETH16I) += eth16i.o
- obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
- obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
diff --git a/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch b/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch
deleted file mode 100644
index 6f2ef7bb36..0000000000
--- a/target/linux/adm5120-2.6/patches/004-adm5120_uart.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-diff -urN linux-2.6.19.2/drivers/serial/Kconfig linux-2.6.19.2-adm5120/drivers/serial/Kconfig
---- linux-2.6.19.2/drivers/serial/Kconfig       2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/serial/Kconfig       2007-01-23 01:13:39.000000000 +0100
-@@ -246,6 +246,22 @@
-
- comment "Non-8250 serial port support"
-
-+config SERIAL_ADM5120
-+       bool "ADM5120 serial port support"
-+       depends on MIPS_ADM5120
-+       select SERIAL_CORE
-+       select SERIAL_CORE_CONSOLE
-+       help
-+         Driver for the on chip UARTs on the ADM5120 SoC
-+
-+config ADM5120_NR_UARTS
-+       int "Maximum number of ADM5120 serial ports"
-+       depends on SERIAL_ADM5120
-+       default "2"
-+       ---help---
-+         Set this to the number of serial ports you want the driver to
-+         support.
-+
- config SERIAL_AMBA_PL010
-        tristate "ARM AMBA PL010 serial port support"
-        depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
-diff -urN linux-2.6.19.2/drivers/serial/Makefile linux-2.6.19.2-adm5120/drivers/serial/Makefile
---- linux-2.6.19.2/drivers/serial/Makefile	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/serial/Makefile	2007-01-23 01:21:45.000000000 +0100
-@@ -20,6 +20,7 @@
- obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
- obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
- obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
-+obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o
- obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
- obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
- obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
-diff -urN linux-2.6.19.2/include/linux/serial_core.h linux-2.6.19.2-adm5120/include/linux/serial_core.h
---- linux-2.6.19.2/include/linux/serial_core.h	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/include/linux/serial_core.h	2007-01-23 01:13:39.000000000 +0100
-@@ -133,6 +133,9 @@
- #define PORT_S3C2412	73
- 
- 
-+/* ADMtek ADM5120 SoC */
-+#define PORT_ADM5120	68
-+
- #ifdef __KERNEL__
- 
- #include <linux/compiler.h>
diff --git a/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch b/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch
deleted file mode 100644
index 40e4fbedf4..0000000000
--- a/target/linux/adm5120-2.6/patches/005-adm5120_usb.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-diff -urN linux-2.6.19.2/drivers/usb/core/hub.c linux-2.6.19.2-adm5120/drivers/usb/core/hub.c
---- linux-2.6.19.2/drivers/usb/core/hub.c	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/usb/core/hub.c	2007-01-23 01:13:39.000000000 +0100
-@@ -2156,6 +2156,8 @@
- 					USB_DT_DEVICE << 8, 0,
- 					buf, GET_DESCRIPTOR_BUFSIZE,
- 					(i ? USB_CTRL_GET_TIMEOUT : 1000));
-+printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0,
-+buf->bDescriptorType, USB_DT_DEVICE);
- 				switch (buf->bMaxPacketSize0) {
- 				case 8: case 16: case 32: case 64: case 255:
- 					if (buf->bDescriptorType ==
-diff -urN linux-2.6.19.2/drivers/usb/host/Kconfig linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig
---- linux-2.6.19.2/drivers/usb/host/Kconfig	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig	2007-01-23 01:13:39.000000000 +0100
-@@ -192,3 +192,6 @@
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called "sl811_cs".
- 
-+config USB_ADM5120_HCD
-+	tristate "ADM5120 HCD support"
-+	depends on USB && MIPS_ADM5120
-diff -urN linux-2.6.19.2/drivers/usb/host/Makefile linux-2.6.19.2-adm5120/drivers/usb/host/Makefile
---- linux-2.6.19.2/drivers/usb/host/Makefile	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/usb/host/Makefile	2007-01-23 01:13:39.000000000 +0100
-@@ -16,3 +16,4 @@
- obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
- obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
- obj-$(CONFIG_ETRAX_ARCH_V10)	+= hc_crisv10.o
-+obj-$(CONFIG_USB_ADM5120_HCD)	+= adm5120-hcd.o
-diff -urN linux-2.6.19.2/drivers/usb/Kconfig linux-2.6.19.2-adm5120/drivers/usb/Kconfig
---- linux-2.6.19.2/drivers/usb/Kconfig	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/usb/Kconfig	2007-01-23 01:13:39.000000000 +0100
-@@ -91,8 +91,6 @@
- 
- source "drivers/usb/net/Kconfig"
- 
--source "drivers/usb/mon/Kconfig"
--
- comment "USB port drivers"
- 	depends on USB
- 
-diff -urN linux-2.6.19.2/drivers/usb/Makefile linux-2.6.19.2-adm5120/drivers/usb/Makefile
---- linux-2.6.19.2/drivers/usb/Makefile	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/usb/Makefile	2007-01-23 01:22:18.000000000 +0100
-@@ -17,6 +17,7 @@
- obj-$(CONFIG_USB_U132_HCD)	+= host/
- obj-$(CONFIG_ETRAX_USB_HOST)	+= host/
- obj-$(CONFIG_USB_OHCI_AT91)	+= host/
-+obj-$(CONFIG_USB_ADM5120_HCD)  	+= host/
- 
- obj-$(CONFIG_USB_ACM)		+= class/
- obj-$(CONFIG_USB_PRINTER)	+= class/
diff --git a/target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch b/target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch
deleted file mode 100644
index 593743d7ba..0000000000
--- a/target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-diff -urN linux-2.6.19.2/drivers/char/Kconfig linux-2.6.19.2-adm5120/drivers/char/Kconfig
---- linux-2.6.19.2/drivers/char/Kconfig	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/char/Kconfig	2007-01-23 01:13:39.000000000 +0100
-@@ -1034,7 +1034,9 @@
- 	  The mmtimer device allows direct userspace access to the
- 	  Altix system timer.
- 
--source "drivers/char/tpm/Kconfig"
-+config ADM5120_GPIO
-+	tristate "ADM5120 GPIO"
-+	depends on MIPS_ADM5120
- 
- config TELCLOCK
- 	tristate "Telecom clock driver for MPBL0010 ATCA SBC"
-diff -urN linux-2.6.19.2/drivers/char/Makefile linux-2.6.19.2-adm5120/drivers/char/Makefile
---- linux-2.6.19.2/drivers/char/Makefile	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-adm5120/drivers/char/Makefile	2007-01-23 01:20:01.000000000 +0100
-@@ -90,6 +90,7 @@
- obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
- obj-$(CONFIG_TANBAC_TB0219)	+= tb0219.o
- obj-$(CONFIG_TELCLOCK)		+= tlclk.o
-+obj-$(CONFIG_ADM5120_GPIO) 	+= adm5120_gpio.o
- 
- obj-$(CONFIG_WATCHDOG)		+= watchdog/
- obj-$(CONFIG_MWAVE)		+= mwave/
diff --git a/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch b/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch
deleted file mode 100644
index 25ec59a390..0000000000
--- a/target/linux/adm5120-2.6/patches/007-adm5120_pci.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-diff -urN linux-2.6.21.1/arch/mips/pci/Makefile linux-2.6.21.1-adm5120/arch/mips/pci/Makefile
---- linux-2.6.21.1/arch/mips/pci/Makefile	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.21.1-adm5120/arch/mips/pci/Makefile	2007-01-23 14:49:40.000000000 +0100
-@@ -53,3 +53,4 @@
- obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
- obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
- obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
-+obj-$(CONFIG_PCI_ADM5120)	+= fixup-adm5120.o ops-adm5120.o pci-adm5120.o
---- linux-2.6.21.1.old/include/linux/pci_ids.h	2007-04-27 23:49:26.000000000 +0200
-+++ linux-2.6.21.1/include/linux/pci_ids.h	2007-05-31 09:36:56.000000000 +0200
-@@ -1701,6 +1701,9 @@
- #define PCI_VENDOR_ID_ESDGMBH		0x12fe
- #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
- 
-+#define PCI_VENDOR_ID_ADMTEK		0x1317
-+#define PCI_DEVICE_ID_ADMTEK_ADM5120	0x5120
-+
- #define PCI_VENDOR_ID_SIIG		0x131f
- #define PCI_SUBVENDOR_ID_SIIG		0x131f
- #define PCI_DEVICE_ID_SIIG_1S_10x_550	0x1000
diff --git a/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch b/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch
deleted file mode 100644
index 81ec37d05f..0000000000
--- a/target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-diff -Nur linux-2.6.19.2/drivers/mtd/Kconfig.old linux-2.6.19.2/drivers/mtd/Kconfig
---- linux-2.6.19.2/drivers/mtd/Kconfig.old	2007-03-25 08:13:02.000000000 +0200
-+++ linux-2.6.19.2/drivers/mtd/Kconfig	2007-03-26 13:37:47.000000000 +0200
-@@ -157,6 +157,22 @@
- 	  for your particular device. It won't happen automatically. The
- 	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
- 
-+config MTD_MYLOADER_PARTS
-+	tristate "MyLoader partition parsing"
-+	depends on MIPS_ADM5120 && MTD_PARTITIONS
-+	---help---
-+	  MyLoader is a bootloader which allows the user to define partitions
-+	  in flash devices, by putting a table in the second erase block
-+	  on the device, similar to a partition table. This table gives the 
-+	  offsets and lengths of the user defined partitions.
-+
-+	  If you need code which can detect and parse these tables, and
-+	  register MTD 'partitions' corresponding to each image detected,
-+	  enable this option.
-+
-+	  You will still need the parsing functions to be called by the driver
-+	  for your particular device. It won't happen automatically.
-+
- comment "User Modules And Translation Layers"
- 	depends on MTD
- 
-diff -Nur linux-2.6.19.2/drivers/mtd/Makefile.old linux-2.6.19.2/drivers/mtd/Makefile
---- linux-2.6.19.2/drivers/mtd/Makefile.old	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2/drivers/mtd/Makefile	2007-03-26 13:28:23.000000000 +0200
-@@ -12,6 +12,7 @@
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
-+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- 
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
diff --git a/target/linux/adm5120-2.6/patches/101-mtd-mxflash.patch b/target/linux/adm5120-2.6/patches/101-mtd-mxflash.patch
deleted file mode 100755
index 754a91e09f..0000000000
--- a/target/linux/adm5120-2.6/patches/101-mtd-mxflash.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- linux-2.6.19.2/drivers/mtd/chips/Kconfig.old	2007-01-11 03:10:36.000000000 +0800
-+++ linux-2.6.19.2/drivers/mtd/chips/Kconfig	2007-03-29 14:43:32.000000000 +0800
-@@ -199,6 +199,14 @@
- 	  provides support for one of those command sets, used on chips
- 	  including the AMD Am29LV320.
- 
-+config MTD_CFI_AMDSTD_FORCE_BOTTOM_BOOT
-+	bool "Force bottom boot for Macronix flash chips"
-+	depends on MTD_CFI_AMDSTD
-+	help
-+	  Some Macronix flash chips have wrong CFI info, and the driver may
-+	  detect the type incorrectly. Select this if the chip part number
-+	  ends with BTC.
-+
- config MTD_CFI_STAA
- 	tristate "Support for ST (Advanced Architecture) flash chips"
- 	depends on MTD_GEN_PROBE
---- linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c.old	2007-03-22 16:14:56.000000000 +0800
-+++ linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c	2007-03-29 14:07:28.000000000 +0800
-@@ -320,6 +320,11 @@
- 		cfi_tell_features(extp);
- #endif
- 
-+#ifdef CONFIG_MTD_CFI_AMDSTD_FORCE_BOTTOM_BOOT
-+		extp->TopBottom = 2;
-+		bootloc = extp->TopBottom;
-+#endif
-+
- 		bootloc = extp->TopBottom;
- 		if ((bootloc != 2) && (bootloc != 3)) {
- 			printk(KERN_WARNING "%s: CFI does not contain boot "
diff --git a/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch b/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch
deleted file mode 100644
index 23f377c90b..0000000000
--- a/target/linux/adm5120-2.6/patches/140-cmdline_hack.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-diff -ur linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S
---- linux.old/arch/mips/kernel/head.S	2006-12-06 17:30:27.000000000 +0100
-+++ linux.dev/arch/mips/kernel/head.S	2006-12-06 18:34:43.000000000 +0100
-@@ -129,15 +129,20 @@
- #endif
- 	.endm
- 
--
- 	j kernel_entry
- 	nop
--
-+	nop
-+	
- 	/*
- 	 * Reserved space for exception handlers.
- 	 * Necessary for machines which link their kernels at KSEG0.
-+	 * Use as temporary storage for the kernel command line, so that it
-+	 * can be updated easily without having to relink the kernel.
- 	 */
--	.align 10
-+	 
-+EXPORT(_image_cmdline)
-+	.ascii "CMDLINE:"
-+	.align 10
- 
- EXPORT(stext)					# used for profiling
- EXPORT(_stext)
diff --git a/target/linux/adm5120-2.6/patches/500-Nand.patch b/target/linux/adm5120-2.6/patches/500-Nand.patch
deleted file mode 100644
index 05beb20241..0000000000
--- a/target/linux/adm5120-2.6/patches/500-Nand.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
-index cfe288a..c528024 100644
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -55,6 +55,12 @@ config MTD_NAND_TOTO
- 	help
- 	  Support for NAND flash on Texas Instruments Toto platform.
- 
-+config MTD_NAND_RB100
-+	tristate "NAND Flash device on RB100 board"
-+	depends on MTD_NAND
-+	help
-+	  Support for NAND flash on RB100 platform.
-+
- config MTD_NAND_IDS
- 	tristate
- 
-diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
-index 4174202..2be57c1 100644
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_MTD_NAND_IDS)		+= nand_ids.
- 
- obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
- obj-$(CONFIG_MTD_NAND_TOTO)		+= toto.o
-+obj-$(CONFIG_MTD_NAND_RB100)		+= rbmipsnand.o
- obj-$(CONFIG_MTD_NAND_AUTCPU12)		+= autcpu12.o
- obj-$(CONFIG_MTD_NAND_EDB7312)		+= edb7312.o
- obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o