atheros: clean up the 2.6.28 port in preparation for pushing it upstream

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14967 3c298f89-4303-0410-b956-a3cf2f4a3e73

42 files changed, 6297 insertions, 6545 deletions

diff --git a/package/madwifi/patches/410-ar231x_2.6.28.patch b/package/madwifi/patches/410-ar231x_2.6.28.patch
new file mode 100644
index 0000000000..87177c3986
--- /dev/null
+++ b/package/madwifi/patches/410-ar231x_2.6.28.patch
@@ -0,0 +1,281 @@
+--- a/ath/if_ath_ahb.c
++++ b/ath/if_ath_ahb.c
+@@ -33,20 +33,15 @@
+ #include "if_ath_ahb.h"
+ #include "ah_soc.h"
+ 
+-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
+-#error "Kernel versions older than 2.6.19 are not supported!"
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28)
++#include <ar231x_platform.h>
+ #endif
+ 
+ struct ath_ahb_softc {
+ 	struct ath_softc	aps_sc;
+-#ifdef CONFIG_PM
+-	u32 aps_pmstate[16];
+-#endif
++	struct ar531x_config aps_config;
+ };
+ 
+-static struct ath_ahb_softc *sclist[2] = {NULL, NULL};
+-static u_int8_t num_activesc = 0;
+-
+ /*
+  * Module glue.
+  */
+@@ -101,13 +96,13 @@ ahb_enable_wmac(u_int16_t devid, u_int16
+ 		while (REG_READ(AR5315_PCI_MAC_PCICFG) & AR5315_PCI_MAC_PCICFG_SPWR_DN);
+ 	} else {
+ 		switch (wlanNum) {
+-		case AR531X_WLAN0_NUM:
++		case 0:
+ 			reset = (AR531X_RESET_WLAN0 |
+ 				AR531X_RESET_WARM_WLAN0_MAC |
+ 				AR531X_RESET_WARM_WLAN0_BB);
+ 			enable = AR531X_ENABLE_WLAN0;
+ 			break;
+-		case AR531X_WLAN1_NUM:
++		case 1:
+ 			reset = (AR531X_RESET_WLAN1 |
+ 				AR531X_RESET_WARM_WLAN1_MAC |
+ 				AR531X_RESET_WARM_WLAN1_BB);
+@@ -144,10 +139,10 @@ ahb_disable_wmac(u_int16_t devid, u_int1
+ 		*en &= ~AR5315_ARB_WLAN;
+ 	} else {
+ 		switch (wlanNum) {
+-		case AR531X_WLAN0_NUM:
++		case 0:
+ 			enable = AR531X_ENABLE_WLAN0;
+ 			break;
+-		case AR531X_WLAN1_NUM:
++		case 1:
+ 			enable = AR531X_ENABLE_WLAN1;
+ 			break;
+ 		default:
+@@ -159,29 +154,6 @@ ahb_disable_wmac(u_int16_t devid, u_int1
+ }
+ 
+ 
+-static int
+-exit_ath_wmac(u_int16_t wlanNum, struct ar531x_config *config)
+-{
+-	struct ath_ahb_softc *sc = sclist[wlanNum];
+-	struct net_device *dev;
+-	u_int16_t devid;
+-
+-	if (sc == NULL)
+-		return -ENODEV; /* XXX: correct return value? */
+-
+-	dev = sc->aps_sc.sc_dev;
+-	ath_detach(dev);
+-	if (dev->irq)
+-		free_irq(dev->irq, dev);
+-	devid = sc->aps_sc.devid;
+-	config->tag = (void *)((unsigned long) devid);
+-
+-	ahb_disable_wmac(devid, wlanNum);
+-	free_netdev(dev);
+-	sclist[wlanNum] = NULL;
+-	return 0;
+-}
+-
+ static const char ubnt[] = "Ubiquiti Networks";
+ static const struct ath_hw_detect cards[] = {
+ 	{
+@@ -266,6 +238,114 @@ static const struct ath_hw_detect cards[
+ 	},
+ };
+ 
++static void
++ahb_hw_detect(struct ath_ahb_softc *sc, const char *radio)
++{
++	u16 *radio_data = (u16 *) radio;
++	if (radio_data) {
++		u16 vendor, id, subvendor, subid;
++		vendor = radio_data[1];
++		id = radio_data[0];
++		subvendor = radio_data[8];
++		subid = radio_data[7];
++		ath_hw_detect(&sc->aps_sc, cards, ARRAY_SIZE(cards), vendor, id, subvendor, subid);
++	}
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28)
++
++static int ahb_wmac_probe(struct platform_device *pdev)
++{
++	struct ar231x_board_config *bcfg = pdev->dev.platform_data;
++	struct ath_ahb_softc *sc;
++	struct net_device *dev;
++	struct resource *res;
++	const char *athname;
++	int err;
++
++	ahb_enable_wmac(bcfg->devid, pdev->id);
++	dev = alloc_netdev(sizeof(struct ath_ahb_softc), "wifi%d", ether_setup);
++	if (!dev)
++		return -ENOMEM;
++
++	sc = dev->priv;
++	sc->aps_sc.sc_dev = dev;
++
++	dev->irq = platform_get_irq(pdev, 0);
++	if (dev->irq <= 0) {
++		printk("%s: Cannot find IRQ resource\n", dev->name);
++		goto error;
++	}
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res) {
++		printk("%s: Cannot find MMIO resource\n", dev->name);
++		goto error;
++	}
++
++	dev->mem_start = KSEG1ADDR(res->start);
++	dev->mem_end = KSEG1ADDR(res->end);
++	sc->aps_sc.sc_iobase = (void __iomem *) dev->mem_start;
++	sc->aps_sc.sc_bdev = NULL;
++
++	/* bus information for the HAL */
++	sc->aps_config.board = (const struct ar531x_boarddata *) bcfg->config;
++	sc->aps_config.radio = bcfg->radio;
++	sc->aps_config.unit = pdev->id;
++	sc->aps_config.tag = NULL;
++
++	err = ath_attach(bcfg->devid, dev, &sc->aps_config);
++	if (err != 0) {
++		printk("%s: ath_attach failed: %d\n", dev->name, err);
++		goto error;
++	}
++
++	athname = ath_hal_probe(ATHEROS_VENDOR_ID, bcfg->devid);
++	printk(KERN_INFO "%s: %s: %s: mem=0x%lx, irq=%d\n",
++		dev_info, dev->name, athname ? athname : "Atheros ???", dev->mem_start, dev->irq);
++
++	if (request_irq(dev->irq, ath_intr, IRQF_SHARED|IRQF_DISABLED, dev->name, dev)) {
++		printk(KERN_WARNING "%s: %s: request_irq failed\n", dev_info, dev->name);
++		goto error;
++	}
++
++	sc->aps_sc.sc_softled = 1; /* SoftLED over GPIO */
++	sc->aps_sc.sc_ledpin = bcfg->config->sysLedGpio;
++	sc->aps_sc.sc_invalid = 0;
++	ahb_hw_detect(sc, bcfg->radio);
++	platform_set_drvdata(pdev, dev);
++	return 0;
++
++error_dev:
++	free_irq(dev->irq, dev);
++error:
++	free_netdev(dev);
++
++	return -ENODEV;
++}
++
++
++static int ahb_wmac_remove(struct platform_device *pdev)
++{
++	struct ar231x_board_config *bcfg = pdev->dev.platform_data;
++	struct net_device *dev;
++
++	dev = platform_get_drvdata(pdev);
++	ath_detach(dev);
++
++	if (dev->irq)
++		free_irq(dev->irq, dev);
++
++	ahb_disable_wmac(bcfg->devid, pdev->id);
++	free_netdev(dev);
++
++	return 0;
++}
++
++#else
++
++static struct ath_ahb_softc *sclist[2] = {NULL, NULL};
++
+ static int
+ init_ath_wmac(u_int16_t devid, u_int16_t wlanNum, struct ar531x_config *config)
+ {
+@@ -318,7 +398,7 @@ init_ath_wmac(u_int16_t devid, u_int16_t
+ 	sc->aps_sc.sc_iobase = (void __iomem *) dev->mem_start;
+ 	sc->aps_sc.sc_bdev = NULL;
+ 
+-	if (request_irq(dev->irq, ath_intr, IRQF_SHARED, dev->name, dev)) {
++	if (request_irq(dev->irq, ath_intr, IRQF_SHARED|IRQF_DISABLED, dev->name, dev)) {
+ 		printk(KERN_WARNING "%s: %s: request_irq failed\n", dev_info, dev->name);
+ 		goto bad3;
+ 	}
+@@ -328,21 +408,12 @@ init_ath_wmac(u_int16_t devid, u_int16_t
+ 	athname = ath_hal_probe(ATHEROS_VENDOR_ID, devid);
+ 	printk(KERN_INFO "%s: %s: %s: mem=0x%lx, irq=%d\n",
+ 		dev_info, dev->name, athname ? athname : "Atheros ???", dev->mem_start, dev->irq);
+-	num_activesc++;
+ 	/* Ready to process interrupts */
+ 
+ 	sc->aps_sc.sc_softled = 1; /* SoftLED over GPIO */
+ 	sc->aps_sc.sc_ledpin = config->board->sysLedGpio;
+ 	sc->aps_sc.sc_invalid = 0;
+-	radio_data = (u16 *) config->radio;
+-	if (radio_data) {
+-		u16 vendor, id, subvendor, subid;
+-		vendor = radio_data[1];
+-		id = radio_data[0];
+-		subvendor = radio_data[8];
+-		subid = radio_data[7];
+-		ath_hw_detect(&sc->aps_sc, cards, ARRAY_SIZE(cards), vendor, id, subvendor, subid);
+-	}
++	ahb_hw_detect(sc, config->radio);
+ 
+ 	return 0;
+ 
+@@ -357,6 +428,29 @@ init_ath_wmac(u_int16_t devid, u_int16_t
+ 	return -ENODEV;
+ }
+ 
++static int
++exit_ath_wmac(u_int16_t wlanNum, struct ar531x_config *config)
++{
++	struct ath_ahb_softc *sc = sclist[wlanNum];
++	struct net_device *dev;
++	u_int16_t devid;
++
++	if (sc == NULL)
++		return -ENODEV; /* XXX: correct return value? */
++
++	dev = sc->aps_sc.sc_dev;
++	ath_detach(dev);
++	if (dev->irq)
++		free_irq(dev->irq, dev);
++	devid = sc->aps_sc.devid;
++	config->tag = (void *)((unsigned long) devid);
++
++	ahb_disable_wmac(devid, wlanNum);
++	free_netdev(dev);
++	sclist[wlanNum] = NULL;
++	return 0;
++}
++
+ static int ahb_wmac_probe(struct platform_device *pdev)
+ {
+ 	u_int16_t devid;
+@@ -377,11 +471,18 @@ static int ahb_wmac_remove(struct platfo
+ 	return 0;
+ }
+ 
++#endif
++
+ static struct platform_driver ahb_wmac_driver = {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28)
++	.driver.name = "ar231x-wmac",
++#else
+ 	.driver.name = "ar531x-wmac",
++#endif
+ 	.probe = ahb_wmac_probe,
+ 	.remove = ahb_wmac_remove
+ };
++
+ int
+ ath_ioctl_ethtool(struct ath_softc *sc, int cmd, void __user *addr)
+ {
diff --git a/target/linux/atheros/config-2.6.28 b/target/linux/atheros/config-2.6.28
index e55b52fb58..f57e02a5dc 100644
--- a/target/linux/atheros/config-2.6.28
+++ b/target/linux/atheros/config-2.6.28
@@ -1,6 +1,6 @@
 CONFIG_32BIT=y
 # CONFIG_64BIT is not set
-CONFIG_AR2313=y
+CONFIG_AR231X_ETHERNET=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -8,16 +8,13 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ATHEROS=y
+CONFIG_ATHEROS_AR2315=y
+CONFIG_ATHEROS_AR2315_PCI=y
 CONFIG_ATHEROS_AR5312=y
-CONFIG_ATHEROS_AR5315=y
-CONFIG_ATHEROS_AR5315_PCI=y
 CONFIG_ATHEROS_WDT=y
-# CONFIG_ATM is not set
-# CONFIG_ATMEL is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_BCM47XX is not set
 CONFIG_BITREVERSE=y
-# CONFIG_BT is not set
 CONFIG_CEVT_R4K=y
 CONFIG_CLASSIC_RCU=y
 CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2 init=/etc/preinit"
@@ -51,12 +48,6 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_VR41XX is not set
-# CONFIG_CRYPTO_AEAD2 is not set
-# CONFIG_CRYPTO_ALGAPI2 is not set
-# CONFIG_CRYPTO_BLKCIPHER2 is not set
-# CONFIG_CRYPTO_HASH2 is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_RNG2 is not set
 CONFIG_CSRC_R4K=y
 CONFIG_DEVPORT=y
 # CONFIG_DM9000 is not set
@@ -64,7 +55,6 @@ CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_DMA_NONCOHERENT=y
 # CONFIG_FIXED_PHY is not set
 # CONFIG_FREEZER is not set
-CONFIG_FS_POSIX_ACL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_GENERIC_CMOS_UPDATE=y
@@ -81,7 +71,6 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HERMES is not set
 CONFIG_HW_HAS_PCI=y
 CONFIG_HW_RANDOM=y
 # CONFIG_I2C is not set
@@ -91,8 +80,6 @@ CONFIG_HW_RANDOM=y
 CONFIG_ICPLUS_PHY=y
 # CONFIG_IDE is not set
 CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
 CONFIG_IRQ_CPU=y
 # CONFIG_ISDN is not set
 CONFIG_KMOD=y
@@ -120,6 +107,7 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_SIM is not set
 CONFIG_MTD=y
 # CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_AR2315=y
 CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_MTD_BLOCK2MTD is not set
@@ -168,9 +156,7 @@ CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_SLRAM is not set
-CONFIG_MTD_SPIFLASH=y
 # CONFIG_NET_PCI is not set
-CONFIG_NF_CT_ACCT=y
 # CONFIG_NF_DEFRAG_IPV4 is not set
 # CONFIG_NO_IOPORT is not set
 # CONFIG_NXP_STB220 is not set
@@ -191,11 +177,10 @@ CONFIG_PHYLIB=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PROBE_INITRD_HEADER is not set
 # CONFIG_PROM_EMU is not set
-CONFIG_RFKILL_LEDS=y
 CONFIG_RTC_LIB=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_WAIT_SCAN is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_EXTENDED is not set
 CONFIG_SERIAL_8250_NR_UARTS=1
 CONFIG_SERIAL_8250_RUNTIME_UARTS=1
@@ -211,9 +196,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=1
 # CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_SWARM is not set
-CONFIG_SND_MIPS=y
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SSB_POSSIBLE=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
@@ -222,14 +205,6 @@ CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_TICK_ONESHOT=y
 CONFIG_TRAD_SIGNALS=y
-# CONFIG_USB is not set
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_STORAGE_CYPRESS_ATACB=y
 CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_WDM is not set
 # CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_MEDIA is not set
-# CONFIG_VIDEO_V4L2 is not set
-# CONFIG_VIDEO_V4L2_COMMON is not set
 CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/Kconfig b/target/linux/atheros/files-2.6.28/arch/mips/atheros/Kconfig
deleted file mode 100644
index 953f0cb5b1..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/Kconfig
+++ /dev/null
@@ -1,27 +0,0 @@
-config ATHEROS_AR5312
-	bool "Atheros 5312/2312+ support"
-	depends on ATHEROS
-	default y
-
-config ATHEROS_AR5315
-	bool "Atheros 5315/2315+ support"
-	depends on ATHEROS
-	select DMA_NONCOHERENT
-	select CEVT_R4K
-	select CSRC_R4K
-	select IRQ_CPU
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select GENERIC_GPIO
-	default y
-
-config ATHEROS_AR5315_PCI
-	bool "PCI support"
-	select HW_HAS_PCI
-	select PCI
-	select USB_ARCH_HAS_HCD
-	select USB_ARCH_HAS_OHCI
-	select USB_ARCH_HAS_EHCI
-	depends on ATHEROS_AR5315
-	default n
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/Makefile b/target/linux/atheros/files-2.6.28/arch/mips/atheros/Makefile
deleted file mode 100644
index 2c2b991bc4..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 2006 FON Technology, SL.
-# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-# Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-#
-
-obj-y += board.o prom.o reset.o
-obj-$(CONFIG_ATHEROS_AR5312) += ar5312/
-obj-$(CONFIG_ATHEROS_AR5315) += ar5315/
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/Makefile b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/Makefile
deleted file mode 100644
index 6c50d9931d..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 2007 FON Technology, SL.
-# Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
-# Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
-#
-
-obj-y := board.o irq.o
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/board.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/board.c
deleted file mode 100644
index 938db11bc8..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/board.c
+++ /dev/null
@@ -1,473 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
- * Copyright (C) 2006 FON Technology, SL.
- * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- */
-
-/*
- * Platform devices for Atheros SoCs
- */
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <asm/bootinfo.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <ar531x.h>
-#include <linux/leds.h>
-
-#define NO_PHY 0x1f
-
-static int is_5312 = 0;
-static struct platform_device *ar5312_devs[6];
-
-static struct resource ar5312_eth0_res[] = {
-	{
-		.name = "eth0_membase",
-		.flags = IORESOURCE_MEM,
-		.start = KSEG1ADDR(AR531X_ENET0),
-		.end = KSEG1ADDR(AR531X_ENET0 + 0x2000),
-	},
-	{
-		.name = "eth0_irq",
-		.flags = IORESOURCE_IRQ,
-		.start = AR5312_IRQ_ENET0_INTRS,
-		.end = AR5312_IRQ_ENET0_INTRS,
-	},
-};
-static struct ar531x_eth ar5312_eth0_data = {
-	.phy = NO_PHY,
-	.mac = 0,
-	.reset_base = AR531X_RESET,
-	.reset_mac = AR531X_RESET_ENET0,
-	.reset_phy = AR531X_RESET_EPHY0,
-	.phy_base = KSEG1ADDR(AR531X_ENET0),
-};
-
-static struct resource ar5312_eth1_res[] = {
-	{
-		.name = "eth1_membase",
-		.flags = IORESOURCE_MEM,
-		.start = KSEG1ADDR(AR531X_ENET1),
-		.end = KSEG1ADDR(AR531X_ENET1 + 0x2000),
-	},
-	{
-		.name = "eth1_irq",
-		.flags = IORESOURCE_IRQ,
-		.start = AR5312_IRQ_ENET1_INTRS,
-		.end = AR5312_IRQ_ENET1_INTRS,
-	},
-};
-static struct ar531x_eth ar5312_eth1_data = {
-	.phy = NO_PHY,
-	.mac = 1,
-	.reset_base = AR531X_RESET,
-	.reset_mac = AR531X_RESET_ENET1,
-	.reset_phy = AR531X_RESET_EPHY1,
-	.phy_base = KSEG1ADDR(AR531X_ENET1),
-};
-
-static struct platform_device ar5312_eth[] = {
-	{
-		.id = 0,
-		.name = "ar531x-eth",
-		.dev.platform_data = &ar5312_eth0_data,
-		.resource = ar5312_eth0_res,
-		.num_resources = ARRAY_SIZE(ar5312_eth0_res)
-	},
-	{
-		.id = 1,
-		.name = "ar531x-eth",
-		.dev.platform_data = &ar5312_eth1_data,
-		.resource = ar5312_eth1_res,
-		.num_resources = ARRAY_SIZE(ar5312_eth1_res)
-	},
-};
-
-
-/*
- * AR2312/3 ethernet uses the PHY of ENET0, but the MAC
- * of ENET1. Atheros calls it 'twisted' for a reason :)
- */
-static struct resource ar231x_eth0_res[] = {
-	{
-		.name = "eth0_membase",
-		.flags = IORESOURCE_MEM,
-		.start = KSEG1ADDR(AR531X_ENET1),
-		.end = KSEG1ADDR(AR531X_ENET1 + 0x2000),
-	},
-	{
-		.name = "eth0_irq",
-		.flags = IORESOURCE_IRQ,
-		.start = AR5312_IRQ_ENET1_INTRS,
-		.end = AR5312_IRQ_ENET1_INTRS,
-	},
-};
-static struct ar531x_eth ar231x_eth0_data = {
-	.phy = 1,
-	.mac = 1,
-	.reset_base = AR531X_RESET,
-	.reset_mac = AR531X_RESET_ENET1,
-	.reset_phy = AR531X_RESET_EPHY1,
-	.phy_base = KSEG1ADDR(AR531X_ENET0),
-};
-static struct platform_device ar231x_eth0 = {
-	.id = 0,
-	.name = "ar531x-eth",
-	.dev.platform_data = &ar231x_eth0_data,
-	.resource = ar231x_eth0_res,
-	.num_resources = ARRAY_SIZE(ar231x_eth0_res)
-};
-
-
-static struct platform_device ar5312_wmac[] = {
-	{
-		.id = 0,
-		.name = "ar531x-wmac",
-	},
-	{
-		.id = 1,
-		.name = "ar531x-wmac",
-	},
-};
-
-static struct physmap_flash_data ar5312_flash_data = {
-	.width	  = 2,
-};
-
-static struct resource ar5312_flash_resource = {
-	.start	= AR531X_FLASH,
-	.end	= AR531X_FLASH + 0x800000 - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device ar5312_physmap_flash = {
-	.name	   = "physmap-flash",
-	.id	 = 0,
-	.dev		= {
-		.platform_data  = &ar5312_flash_data,
-	},
-	.num_resources  = 1,
-	.resource   = &ar5312_flash_resource,
-};
-
-#ifdef CONFIG_LEDS_GPIO
-static struct gpio_led ar5312_leds[] = {
-	{ .name = "wlan", .gpio = 0, .active_low = 1, },
-};
-
-static const struct gpio_led_platform_data ar5312_led_data = {
-	.num_leds = ARRAY_SIZE(ar5312_leds),
-	.leds = (void *) ar5312_leds,
-};
-
-static struct platform_device ar5312_gpio_leds = {
-	.name = "leds-gpio",
-	.id = -1,
-	.dev = {
-		.platform_data = (void *) &ar5312_led_data,
-	}
-};
-#endif
-
-/*
- * NB: This mapping size is larger than the actual flash size,
- * but this shouldn't be a problem here, because the flash
- * will simply be mapped multiple times.
- */
-static char __init *ar5312_flash_limit(void)
-{
-	u32 ctl;
-	/*
-	 * Configure flash bank 0.
-	 * Assume 8M window size. Flash will be aliased if it's smaller
-	 */
-	ctl = FLASHCTL_E |
-		FLASHCTL_AC_8M |
-		FLASHCTL_RBLE |
-		(0x01 << FLASHCTL_IDCY_S) |
-		(0x07 << FLASHCTL_WST1_S) |
-		(0x07 << FLASHCTL_WST2_S) |
-		(sysRegRead(AR531X_FLASHCTL0) & FLASHCTL_MW);
-
-	sysRegWrite(AR531X_FLASHCTL0, ctl);
-
-	/* Disable other flash banks */
-	sysRegWrite(AR531X_FLASHCTL1,
-		sysRegRead(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC));
-
-	sysRegWrite(AR531X_FLASHCTL2,
-		sysRegRead(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
-
-	return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000);
-}
-
-static struct ar531x_config __init *init_wmac(int unit)
-{
-	struct ar531x_config *config;
-
-	config = (struct ar531x_config *) kzalloc(sizeof(struct ar531x_config), GFP_KERNEL);
-	config->board = board_config;
-	config->radio = radio_config;
-	config->unit = unit;
-	config->tag = (u_int16_t) ((sysRegRead(AR531X_REV) >> AR531X_REV_WMAC_MIN_S) & AR531X_REV_CHIP);
-
-	return config;
-}
-
-int __init ar5312_init_devices(void)
-{
-	struct ar531x_boarddata *bcfg;
-	char *radio, *c;
-	int dev = 0;
-	uint32_t fctl = 0;
-
-	if (!is_5312)
-		return 0;
-
-	/* Locate board/radio config data */
-	ar531x_find_config(ar5312_flash_limit());
-	bcfg = (struct ar531x_boarddata *) board_config;
-
-
-	/*
-	 * Chip IDs and hardware detection for some Atheros
-	 * models are really broken!
-	 *
-	 * Atheros uses a disabled WMAC0 and Silicon ID of AR5312
-	 * as indication for AR2312, which is otherwise
-	 * indistinguishable from the real AR5312.
-	 */
-	if (radio_config) {
-		radio = radio_config + AR531X_RADIO_MASK_OFF;
-		if ((*((u32 *) radio) & AR531X_RADIO0_MASK) == 0)
-			bcfg->config |= BD_ISCASPER;
-	} else
-		radio = NULL;
-
-	/* AR2313 has CPU minor rev. 10 */
-	if ((current_cpu_data.processor_id & 0xff) == 0x0a)
-		mips_machtype = MACH_ATHEROS_AR2313;
-
-	/* AR2312 shares the same Silicon ID as AR5312 */
-	else if (bcfg->config & BD_ISCASPER)
-		mips_machtype = MACH_ATHEROS_AR2312;
-
-	/* Everything else is probably AR5312 or compatible */
-	else
-		mips_machtype = MACH_ATHEROS_AR5312;
-
-	ar5312_eth0_data.board_config = board_config;
-	ar5312_eth1_data.board_config = board_config;
-
-	/* fixup flash width */
-	fctl = sysRegRead(AR531X_FLASHCTL) & FLASHCTL_MW;
-	switch (fctl) {
-		case FLASHCTL_MWx16:
-			ar5312_flash_data.width = 2;
-			break;
-		case FLASHCTL_MWx8:
-		default:
-			ar5312_flash_data.width = 1;
-			break;
-	}
-
-	ar5312_devs[dev++] = &ar5312_physmap_flash;
-
-#ifdef CONFIG_LEDS_GPIO
-	ar5312_leds[0].gpio = bcfg->sysLedGpio;
-	ar5312_devs[dev++] = &ar5312_gpio_leds;
-#endif
-
-	if (!memcmp(bcfg->enet0Mac, "\xff\xff\xff\xff\xff\xff", 6))
-		memcpy(bcfg->enet0Mac, bcfg->enet1Mac, 6);
-
-	if (memcmp(bcfg->enet0Mac, bcfg->enet1Mac, 6) == 0) {
-		/* ENET0 and ENET1 have the same mac.
-		 * Increment the one from ENET1 */
-		c = bcfg->enet1Mac + 5;
-		while ((c >= (char *) bcfg->enet1Mac) && !(++(*c)))
-			c--;
-	}
-
-	switch(mips_machtype) {
-		case MACH_ATHEROS_AR5312:
-			ar5312_eth0_data.macaddr = bcfg->enet0Mac;
-			ar5312_eth1_data.macaddr = bcfg->enet1Mac;
-			ar5312_devs[dev++] = &ar5312_eth[0];
-			ar5312_devs[dev++] = &ar5312_eth[1];
-			break;
-		case MACH_ATHEROS_AR2312:
-		case MACH_ATHEROS_AR2313:
-			ar231x_eth0_data.macaddr = bcfg->enet0Mac;
-			ar5312_devs[dev++] = &ar231x_eth0;
-			ar5312_flash_data.width = 1;
-			break;
-	}
-
-	if (radio) {
-		if (mips_machtype == MACH_ATHEROS_AR5312) {
-			if (*((u32 *) radio) & AR531X_RADIO0_MASK) {
-				ar5312_wmac[0].dev.platform_data = init_wmac(0);
-				ar5312_devs[dev++] = &ar5312_wmac[0];
-			}
-		}
-		if (*((u32 *) radio) & AR531X_RADIO1_MASK) {
-			ar5312_wmac[1].dev.platform_data = init_wmac(1);
-			ar5312_devs[dev++] = &ar5312_wmac[1];
-		}
-	}
-
-	return platform_add_devices(ar5312_devs, dev);
-}
-
-
-static void ar5312_halt(void)
-{
-	 while (1);
-}
-
-static void ar5312_power_off(void)
-{
-	 ar5312_halt();
-}
-
-
-static void ar5312_restart(char *command)
-{
-	/* reset the system */
-	for(;;) sysRegWrite(AR531X_RESET, AR531X_RESET_SYSTEM);
-}
-
-
-/*
- * This table is indexed by bits 5..4 of the CLOCKCTL1 register
- * to determine the predevisor value.
- */
-static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = {
-	1,
-	2,
-	4,
-	5
-};
-
-
-static unsigned int __init ar5312_cpu_frequency(void)
-{
-	unsigned int result;
-	unsigned int predivide_mask, predivide_shift;
-	unsigned int multiplier_mask, multiplier_shift;
-	unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier;
-	unsigned int doubler_mask;
-	unsigned int wisoc_revision;
-
-	/* Trust the bootrom's idea of cpu frequency. */
-	if ((result = sysRegRead(AR5312_SCRATCH)))
-		return result;
-
-	wisoc_revision = (sysRegRead(AR531X_REV) & AR531X_REV_MAJ) >> AR531X_REV_MAJ_S;
-	if (wisoc_revision == AR531X_REV_MAJ_AR2313) {
-		predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
-		predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
-		multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
-		multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
-		doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
-	} else { /* AR5312 and AR2312 */
-		predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
-		predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
-		multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
-		multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
-		doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
-	}
-
-	/*
-	 * Clocking is derived from a fixed 40MHz input clock.
-	 *
-	 *  cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
-	 *  sysFreq = cpuFreq / 4	   (used for APB clock, serial,
-	 *							   flash, Timer, Watchdog Timer)
-	 *
-	 *  cntFreq = cpuFreq / 2	   (use for CPU count/compare)
-	 *
-	 * So, for example, with a PLL multiplier of 5, we have
-	 *
-	 *  cpuFreq = 200MHz
-	 *  sysFreq = 50MHz
-	 *  cntFreq = 100MHz
-	 *
-	 * We compute the CPU frequency, based on PLL settings.
-	 */
-
-	clockCtl1 = sysRegRead(AR5312_CLOCKCTL1);
-	preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift;
-	preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
-	multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift;
-
-	if (clockCtl1 & doubler_mask) {
-		multiplier = multiplier << 1;
-	}
-	return (40000000 / preDivisor) * multiplier;
-}
-
-static inline int ar5312_sys_frequency(void)
-{
-	return ar5312_cpu_frequency() / 4;
-}
-
-static void __init ar5312_time_init(void)
-{
-	mips_hpt_frequency = ar5312_cpu_frequency() / 2;
-}
-
-
-void __init ar5312_prom_init(void)
-{
-	u32 memsize, memcfg, bank0AC, bank1AC;
-
-	is_5312 = 1;
-
-	/* Detect memory size */
-	memcfg = sysRegRead(AR531X_MEM_CFG1);
-	bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
-	bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
-	memsize = (bank0AC ? (1 << (bank0AC+1)) : 0)
-	        + (bank1AC ? (1 << (bank1AC+1)) : 0);
-	memsize <<= 20;
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-
-	/* Initialize it to AR5312 for now. Real detection will be done
-	 * in ar5312_init_devices() */
-	mips_machtype = MACH_ATHEROS_AR5312;
-}
-
-void __init ar5312_plat_setup(void)
-{
-	/* Clear any lingering AHB errors */
-	sysRegRead(AR531X_PROCADDR);
-	sysRegRead(AR531X_DMAADDR);
-	sysRegWrite(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
-
-	board_time_init = ar5312_time_init;
-
-	_machine_restart = ar5312_restart;
-	_machine_halt = ar5312_halt;
-	pm_power_off = ar5312_power_off;
-
-	serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency());
-}
-
-arch_initcall(ar5312_init_devices);
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/irq.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/irq.c
deleted file mode 100644
index 0cbdc8ed22..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/irq.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
- * Copyright (C) 2006 FON Technology, SL.
- * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- */
-
-/*
- * Platform devices for Atheros SoCs
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <asm/bootinfo.h>
-#include <asm/time.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <ar531x.h>
-#include <gpio.h>
-
-/*
- * Called when an interrupt is received, this function
- * determines exactly which interrupt it was, and it
- * invokes the appropriate handler.
- *
- * Implicitly, we also define interrupt priority by
- * choosing which to dispatch first.
- */
-asmlinkage void ar5312_irq_dispatch(void)
-{
-	int pending = read_c0_status() & read_c0_cause();
-
-	if (pending & CAUSEF_IP2)
-		do_IRQ(AR5312_IRQ_WLAN0_INTRS);
-	else if (pending & CAUSEF_IP3)
-		do_IRQ(AR5312_IRQ_ENET0_INTRS);
-	else if (pending & CAUSEF_IP4)
-		do_IRQ(AR5312_IRQ_ENET1_INTRS);
-	else if (pending & CAUSEF_IP5)
-		do_IRQ(AR5312_IRQ_WLAN1_INTRS);
-	else if (pending & CAUSEF_IP6) {
-		unsigned int ar531x_misc_intrs = sysRegRead(AR531X_ISR) & sysRegRead(AR531X_IMR);
-
-		if (ar531x_misc_intrs & AR531X_ISR_TIMER) {
-			do_IRQ(AR531X_MISC_IRQ_TIMER);
-			(void)sysRegRead(AR531X_TIMER);
-		} else if (ar531x_misc_intrs & AR531X_ISR_AHBPROC)
-			do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
-		else if ((ar531x_misc_intrs & AR531X_ISR_UART0))
-			do_IRQ(AR531X_MISC_IRQ_UART0);
-		else if (ar531x_misc_intrs & AR531X_ISR_WD)
-			do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
-		else
-			do_IRQ(AR531X_MISC_IRQ_NONE);
-	} else if (pending & CAUSEF_IP7) {
-		do_IRQ(AR531X_IRQ_CPU_CLOCK);
-	}
-}
-
-
-/* Enable the specified AR531X_MISC_IRQ interrupt */
-static void
-ar5312_misc_intr_enable(unsigned int irq)
-{
-	unsigned int imr;
-
-	imr = sysRegRead(AR531X_IMR);
-	imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1));
-	sysRegWrite(AR531X_IMR, imr);
-	sysRegRead(AR531X_IMR); /* flush write buffer */
-}
-
-/* Disable the specified AR531X_MISC_IRQ interrupt */
-static void
-ar5312_misc_intr_disable(unsigned int irq)
-{
-	unsigned int imr;
-
-	imr = sysRegRead(AR531X_IMR);
-	imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1));
-	sysRegWrite(AR531X_IMR, imr);
-	sysRegRead(AR531X_IMR); /* flush write buffer */
-}
-
-/* Turn on the specified AR531X_MISC_IRQ interrupt */
-static unsigned int
-ar5312_misc_intr_startup(unsigned int irq)
-{
-	ar5312_misc_intr_enable(irq);
-	return 0;
-}
-
-/* Turn off the specified AR531X_MISC_IRQ interrupt */
-static void
-ar5312_misc_intr_shutdown(unsigned int irq)
-{
-	ar5312_misc_intr_disable(irq);
-}
-
-static void
-ar5312_misc_intr_ack(unsigned int irq)
-{
-	ar5312_misc_intr_disable(irq);
-}
-
-static void
-ar5312_misc_intr_end(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		ar5312_misc_intr_enable(irq);
-}
-
-static struct irq_chip ar5312_misc_intr_controller = {
-	.typename	= "AR5312 misc",
-	.startup	= ar5312_misc_intr_startup,
-	.shutdown	= ar5312_misc_intr_shutdown,
-	.enable		= ar5312_misc_intr_enable,
-	.disable	= ar5312_misc_intr_disable,
-	.ack		= ar5312_misc_intr_ack,
-	.end		= ar5312_misc_intr_end,
-};
-
-static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id)
-{
-	u32 proc1 = sysRegRead(AR531X_PROC1);
-	u32 procAddr = sysRegRead(AR531X_PROCADDR); /* clears error state */
-	u32 dma1 = sysRegRead(AR531X_DMA1);
-	u32 dmaAddr = sysRegRead(AR531X_DMAADDR);   /* clears error state */
-
-	printk("AHB interrupt: PROCADDR=0x%8.8x  PROC1=0x%8.8x  DMAADDR=0x%8.8x  DMA1=0x%8.8x\n",
-			procAddr, proc1, dmaAddr, dma1);
-
-	machine_restart("AHB error"); /* Catastrophic failure */
-	return IRQ_HANDLED;
-}
-
-
-static struct irqaction ar5312_ahb_proc_interrupt  = {
-	.handler	= ar5312_ahb_proc_handler,
-	.flags		= IRQF_DISABLED,
-	.name		= "ar5312_ahb_proc_interrupt",
-};
-
-
-static struct irqaction cascade  = {
-	.handler	= no_action,
-	.flags		= IRQF_DISABLED,
-	.name		= "cascade",
-};
-
-void __init ar5312_misc_intr_init(int irq_base)
-{
-	int i;
-
-	for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) {
-		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = NULL;
-		irq_desc[i].depth = 1;
-		irq_desc[i].chip = &ar5312_misc_intr_controller;
-	}
-	setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt);
-	setup_irq(AR5312_IRQ_MISC_INTRS, &cascade);
-}
-
-
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/Makefile b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/Makefile
deleted file mode 100644
index 9b900113ff..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 2007 FON Technology, SL.
-# Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
-# Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
-#
-
-obj-y := board.o irq.o
-obj-$(CONFIG_ATHEROS_AR5315_PCI) += pci.o
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/board.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/board.c
deleted file mode 100644
index 6ee75a966e..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/board.c
+++ /dev/null
@@ -1,414 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
- * Copyright (C) 2006 FON Technology, SL.
- * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- */
-
-/*
- * Platform devices for Atheros SoCs
- */
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <linux/delay.h>
-#include <asm/bootinfo.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <ar531x.h>
-#include <linux/leds.h>
-#include <asm/gpio.h>
-
-static int is_5315 = 0;
-
-static struct resource ar5315_eth_res[] = {
-	{
-		.name = "eth0_membase",
-		.flags = IORESOURCE_MEM,
-		.start = AR5315_ENET0,
-		.end = AR5315_ENET0 + 0x2000,
-	},
-	{
-		.name = "eth0_irq",
-		.flags = IORESOURCE_IRQ,
-		.start = AR5315_IRQ_ENET0_INTRS,
-		.end = AR5315_IRQ_ENET0_INTRS,
-	},
-};
-
-static struct ar531x_eth ar5315_eth_data = {
-	.phy = 1,
-	.mac = 0,
-	.reset_base = AR5315_RESET,
-	.reset_mac = AR5315_RESET_ENET0,
-	.reset_phy = AR5315_RESET_EPHY0,
-	.phy_base = AR5315_ENET0
-};
-
-static struct platform_device ar5315_eth = {
-	.id = 0,
-	.name = "ar531x-eth",
-	.dev.platform_data = &ar5315_eth_data,
-	.resource = ar5315_eth_res,
-	.num_resources = ARRAY_SIZE(ar5315_eth_res)
-};
-
-static struct platform_device ar5315_wmac = {
-	.id = 0,
-	.name = "ar531x-wmac",
-	/* FIXME: add resources */
-};
-
-static struct resource ar5315_spiflash_res[] = {
-	{
-		.name = "flash_base",
-		.flags = IORESOURCE_MEM,
-		.start = KSEG1ADDR(AR5315_SPI_READ),
-		.end = KSEG1ADDR(AR5315_SPI_READ) + 0x800000,
-	},
-	{
-		.name = "flash_regs",
-		.flags = IORESOURCE_MEM,
-		.start = 0x11300000,
-		.end = 0x11300012,
-	},
-};
-
-static struct platform_device ar5315_spiflash = {
-	.id = 0,
-	.name = "spiflash",
-	.resource = ar5315_spiflash_res,
-	.num_resources = ARRAY_SIZE(ar5315_spiflash_res)
-};
-
-#ifdef CONFIG_LEDS_GPIO
-static struct gpio_led ar5315_leds[8];
-
-static struct gpio_led_platform_data ar5315_led_data = {
-	.num_leds = ARRAY_SIZE(ar5315_leds),
-	.leds = (void *) ar5315_leds,
-};
-
-static struct platform_device ar5315_gpio_leds = {
-	.name = "leds-gpio",
-	.id = -1,
-	.dev = {
-		.platform_data = (void *) &ar5315_led_data,
-	}
-};
-#endif
-
-static struct platform_device ar5315_wdt =
-{
-	.id = 0,
-	.name = "ar2315_wdt",
-};
-
-static __initdata struct platform_device *ar5315_devs[6];
-
-static void *flash_regs;
-
-static inline __u32 spiflash_regread32(int reg)
-{
-	volatile __u32 *data = (__u32 *)(flash_regs + reg);
-
-	return (*data);
-}
-
-static inline void spiflash_regwrite32(int reg, __u32 data)
-{
-	volatile __u32 *addr = (__u32 *)(flash_regs + reg);
-
-	*addr = data;
-}
-
-#define SPI_FLASH_CTL      0x00
-#define SPI_FLASH_OPCODE   0x04
-#define SPI_FLASH_DATA     0x08
-
-static __u8 spiflash_probe(void)
-{
-	 __u32 reg;
-
-	do {
-		reg = spiflash_regread32(SPI_FLASH_CTL);
-	} while (reg & SPI_CTL_BUSY);
-
-	spiflash_regwrite32(SPI_FLASH_OPCODE, 0xab);
-
-	reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | 4 |
-		(1 << 4) | SPI_CTL_START;
-
-	spiflash_regwrite32(SPI_FLASH_CTL, reg);
-
-	do {
-		reg = spiflash_regread32(SPI_FLASH_CTL);
-	} while (reg & SPI_CTL_BUSY);
-
-	reg = (__u32) spiflash_regread32(SPI_FLASH_DATA);
-	reg &= 0xff;
-
-	return (u8) reg;
-}
-
-
-#define STM_8MBIT_SIGNATURE     0x13
-#define STM_16MBIT_SIGNATURE    0x14
-#define STM_32MBIT_SIGNATURE    0x15
-#define STM_64MBIT_SIGNATURE    0x16
-#define STM_128MBIT_SIGNATURE   0x17
-
-
-static char __init *ar5315_flash_limit(void)
-{
-	u8 sig;
-	u32 flash_size = 0;
-
-	/* probe the flash chip size */
-	flash_regs = ioremap_nocache(ar5315_spiflash_res[1].start, ar5315_spiflash_res[1].end - ar5315_spiflash_res[1].start);
-	sig = spiflash_probe();
-	iounmap(flash_regs);
-
-	switch(sig) {
-		case STM_8MBIT_SIGNATURE:
-			flash_size = 0x00100000;
-			break;
-		case STM_16MBIT_SIGNATURE:
-			flash_size = 0x00200000;
-			break;
-		case STM_32MBIT_SIGNATURE:
-			flash_size = 0x00400000;
-			break;
-		case STM_64MBIT_SIGNATURE:
-			flash_size = 0x00800000;
-			break;
-		case STM_128MBIT_SIGNATURE:
-			flash_size = 0x01000000;
-			break;
-	}
-
-	ar5315_spiflash_res[0].end = ar5315_spiflash_res[0].start + flash_size;
-	return (char *) ar5315_spiflash_res[0].end;
-}
-
-int __init ar5315_init_devices(void)
-{
-	struct ar531x_config *config;
-	struct ar531x_boarddata *bcfg;
-	int dev = 0;
-#ifdef CONFIG_LEDS_GPIO
-	int i;
-	char *tmp;
-#endif
-
-	if (!is_5315)
-		return 0;
-
-	/* Find board configuration */
-	ar531x_find_config(ar5315_flash_limit());
-	bcfg = (struct ar531x_boarddata *) board_config;
-
-	config = (struct ar531x_config *) kzalloc(sizeof(struct ar531x_config), GFP_KERNEL);
-	config->board = board_config;
-	config->radio = radio_config;
-	config->unit = 0;
-	config->tag = (u_int16_t) (sysRegRead(AR5315_SREV) & AR5315_REV_CHIP);
-
-	ar5315_eth_data.board_config = board_config;
-	ar5315_eth_data.macaddr = bcfg->enet0Mac;
-	ar5315_wmac.dev.platform_data = config;
-
-	ar5315_devs[dev++] = &ar5315_eth;
-	ar5315_devs[dev++] = &ar5315_wmac;
-	ar5315_devs[dev++] = &ar5315_spiflash;
-	ar5315_devs[dev++] = &ar5315_wdt;
-
-#ifdef CONFIG_LEDS_GPIO
-	ar5315_led_data.num_leds = 0;
-	for(i = 1; i < 8; i++)
-	{
-		if((i != AR5315_RESET_GPIO) && (i != bcfg->resetConfigGpio))
-		{
-			if(i == bcfg->sysLedGpio)
-			{
-				tmp = kstrdup("wlan", GFP_KERNEL);
-			} else {
-				tmp = kmalloc(6, GFP_KERNEL);
-				if(tmp)
-					sprintf((char*)tmp, "gpio%d", i);
-			}
-			if(tmp)
-			{
-				ar5315_leds[ar5315_led_data.num_leds].name = tmp;
-				ar5315_leds[ar5315_led_data.num_leds].gpio = i;
-				ar5315_leds[ar5315_led_data.num_leds].active_low = 0;
-				ar5315_led_data.num_leds++;
-			} else {
-				printk("failed to alloc led string\n");
-				continue;
-			}
-		}
-	}
-	ar5315_devs[dev++] = &ar5315_gpio_leds;
-#endif
-
-	return platform_add_devices(ar5315_devs, dev);
-}
-
-static void ar5315_halt(void)
-{
-	 while (1);
-}
-
-static void ar5315_power_off(void)
-{
-	 ar5315_halt();
-}
-
-
-static void ar5315_restart(char *command)
-{
-	void (*mips_reset_vec)(void) = (void *) 0xbfc00000;
-
-	/* reset the system */
-	sysRegWrite(AR5315_COLD_RESET,AR5317_RESET_SYSTEM);
-
-	/* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround.
-	 * give it some time to attempt a gpio based hardware reset
-	 * (atheros reference design workaround) */
-	gpio_direction_output(AR5315_RESET_GPIO, 0);
-	mdelay(100);
-
-	/* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
-	 * workaround. Attempt to jump to the mips reset location -
-	 * the boot loader itself might be able to recover the system */
-	mips_reset_vec();
-}
-
-
-/*
- * This table is indexed by bits 5..4 of the CLOCKCTL1 register
- * to determine the predevisor value.
- */
-static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = {
-    1,
-    2,
-    4,
-    5
-};
-
-static int __initdata PLLC_DIVIDE_TABLE[5] = {
-    2,
-    3,
-    4,
-    6,
-    3
-};
-
-static unsigned int __init
-ar5315_sys_clk(unsigned int clockCtl)
-{
-    unsigned int pllcCtrl,cpuDiv;
-    unsigned int pllcOut,refdiv,fdiv,divby2;
-	unsigned int clkDiv;
-
-    pllcCtrl = sysRegRead(AR5315_PLLC_CTL);
-    refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
-    refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv];
-    fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
-    divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
-    divby2 += 1;
-    pllcOut = (40000000/refdiv)*(2*divby2)*fdiv;
-
-
-    /* clkm input selected */
-	switch(clockCtl & CPUCLK_CLK_SEL_M) {
-		case 0:
-		case 1:
-			clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S];
-			break;
-		case 2:
-			clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S];
-			break;
-		default:
-			pllcOut = 40000000;
-			clkDiv = 1;
-			break;
-	}
-	cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;
-	cpuDiv = cpuDiv * 2 ?: 1;
-	return (pllcOut/(clkDiv * cpuDiv));
-}
-
-static inline unsigned int ar5315_cpu_frequency(void)
-{
-    return ar5315_sys_clk(sysRegRead(AR5315_CPUCLK));
-}
-
-static inline unsigned int ar5315_apb_frequency(void)
-{
-    return ar5315_sys_clk(sysRegRead(AR5315_AMBACLK));
-}
-
-static void __init ar5315_time_init(void)
-{
-	mips_hpt_frequency = ar5315_cpu_frequency() / 2;
-}
-
-void __init ar5315_prom_init(void)
-{
-	u32 memsize, memcfg, devid;
-
-	is_5315 = 1;
-	memcfg = sysRegRead(AR5315_MEM_CFG);
-	memsize   = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S);
-	memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S);
-	memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S);
-	memsize <<= 3;
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-
-	/* Detect the hardware based on the device ID */
-	devid = sysRegRead(AR5315_SREV) & AR5315_REV_CHIP;
-	switch(devid) {
-		case 0x90:
-		case 0x91:
-			mips_machtype = MACH_ATHEROS_AR2317;
-			break;
-		default:
-			mips_machtype = MACH_ATHEROS_AR2315;
-			break;
-	}
-}
-
-void __init ar5315_plat_setup(void)
-{
-	unsigned int config = read_c0_config();
-
-	/* Clear any lingering AHB errors */
-	write_c0_config(config & ~0x3);
-	sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET);
-	sysRegRead(AR5315_AHB_ERR1);
-	sysRegWrite(AR5315_WDC, WDC_IGNORE_EXPIRATION);
-
-	board_time_init = ar5315_time_init;
-
-	_machine_restart = ar5315_restart;
-	_machine_halt = ar5315_halt;
-	pm_power_off = ar5315_power_off;
-
-	serial_setup(KSEG1ADDR(AR5315_UART0), ar5315_apb_frequency());
-}
-
-arch_initcall(ar5315_init_devices);
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/irq.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/irq.c
deleted file mode 100644
index 581b1a4a10..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/irq.c
+++ /dev/null
@@ -1,359 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
- * Copyright (C) 2006 FON Technology, SL.
- * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- */
-
-/*
- * Platform devices for Atheros SoCs
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <asm/bootinfo.h>
-#include <asm/irq_cpu.h>
-#include <asm/io.h>
-
-#include <ar531x.h>
-#include <gpio.h>
-
-static u32 gpiointmask = 0, gpiointval = 0;
-
-static inline void ar5315_gpio_irq(void)
-{
-	u32 pend;
-	sysRegWrite(AR5315_ISR, sysRegRead(AR5315_IMR) | ~AR5315_ISR_GPIO);
-
-	/* only do one gpio interrupt at a time */
-	pend = (sysRegRead(AR5315_GPIO_DI) ^ gpiointval) & gpiointmask;
-	if (!pend)
-		return;
-
-	do_IRQ(AR531X_GPIO_IRQ_BASE + fls(pend) - 1);
-}
-
-
-/*
- * Called when an interrupt is received, this function
- * determines exactly which interrupt it was, and it
- * invokes the appropriate handler.
- *
- * Implicitly, we also define interrupt priority by
- * choosing which to dispatch first.
- */
-asmlinkage void ar5315_irq_dispatch(void)
-{
-	int pending = read_c0_status() & read_c0_cause();
-
-	if (pending & CAUSEF_IP3)
-		do_IRQ(AR5315_IRQ_WLAN0_INTRS);
-	else if (pending & CAUSEF_IP4)
-		do_IRQ(AR5315_IRQ_ENET0_INTRS);
-#ifdef CONFIG_PCI
-	else if (pending & CAUSEF_IP5)
-		ar5315_pci_irq(AR5315_IRQ_LCBUS_PCI);
-#endif
-	else if (pending & CAUSEF_IP2) {
-		unsigned int ar531x_misc_intrs = sysRegRead(AR5315_ISR) & sysRegRead(AR5315_IMR);
-
-		if (ar531x_misc_intrs & AR5315_ISR_SPI)
-			do_IRQ(AR531X_MISC_IRQ_SPI);
-		else if (ar531x_misc_intrs & AR5315_ISR_TIMER)
-			do_IRQ(AR531X_MISC_IRQ_TIMER);
-		else if (ar531x_misc_intrs & AR5315_ISR_AHB)
-			do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
-		else if (ar531x_misc_intrs & AR5315_ISR_GPIO)
-			ar5315_gpio_irq();
-		else if (ar531x_misc_intrs & AR5315_ISR_UART0)
-			do_IRQ(AR531X_MISC_IRQ_UART0);
-		else if (ar531x_misc_intrs & AR5315_ISR_WD)
-			do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
-		else
-			do_IRQ(AR531X_MISC_IRQ_NONE);
-	} else if (pending & CAUSEF_IP7)
-		do_IRQ(AR531X_IRQ_CPU_CLOCK);
-}
-
-#ifdef CONFIG_PCI
-static inline void pci_abort_irq(void)
-{
-	sysRegWrite(AR5315_PCI_INT_STATUS, AR5315_PCI_ABORT_INT);
-	(void)sysRegRead(AR5315_PCI_INT_STATUS); /* flush write to hardware */
-}
-
-static inline void pci_ack_irq(void)
-{
-	sysRegWrite(AR5315_PCI_INT_STATUS, AR5315_PCI_EXT_INT);
-	(void)sysRegRead(AR5315_PCI_INT_STATUS); /* flush write to hardware */
-}
-
-void ar5315_pci_irq(int irq)
-{
-	if (sysRegRead(AR5315_PCI_INT_STATUS) == AR5315_PCI_ABORT_INT)
-		pci_abort_irq();
-	else {
-		do_IRQ(irq);
-		pci_ack_irq();
-	}
-}
-#endif
-
-static void ar5315_gpio_intr_enable(unsigned int irq)
-{
-	u32 gpio, mask;
-	gpio = irq - AR531X_GPIO_IRQ_BASE;
-	mask = 1 << gpio;
-	gpiointmask |= mask;
-
-	/* reconfigure GPIO line as input */
-	sysRegMask(AR5315_GPIO_CR, AR5315_GPIO_CR_M(gpio), AR5315_GPIO_CR_I(gpio));
-
-	/* Enable interrupt with edge detection */
-	sysRegMask(AR5315_GPIO_INT, AR5315_GPIO_INT_M | AR5315_GPIO_INT_LVL_M, gpio | AR5315_GPIO_INT_LVL(3));
-}
-
-static void ar5315_gpio_intr_disable(unsigned int irq)
-{
-	u32 gpio, mask;
-	gpio = irq - AR531X_GPIO_IRQ_BASE;
-	mask = 1 << gpio;
-
-	gpiointmask &= ~mask;
-
-	/* Disable interrupt with edge detection */
-	sysRegMask(AR5315_GPIO_INT, AR5315_GPIO_INT_M | AR5315_GPIO_INT_LVL_M, gpio | AR5315_GPIO_INT_LVL(0));
-}
-
-/* Turn on the specified AR531X_MISC_IRQ interrupt */
-static unsigned int ar5315_gpio_intr_startup(unsigned int irq)
-{
-	ar5315_gpio_intr_enable(irq);
-	return 0;
-}
-
-/* Turn off the specified AR531X_MISC_IRQ interrupt */
-static void
-ar5315_gpio_intr_shutdown(unsigned int irq)
-{
-	ar5315_gpio_intr_disable(irq);
-}
-
-static void
-ar5315_gpio_intr_ack(unsigned int irq)
-{
-	ar5315_gpio_intr_disable(irq);
-}
-
-static void
-ar5315_gpio_intr_end(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		ar5315_gpio_intr_enable(irq);
-}
-
-static struct irq_chip ar5315_gpio_intr_controller = {
-	.typename	= "AR5315 GPIO",
-	.startup	= ar5315_gpio_intr_startup,
-	.shutdown	= ar5315_gpio_intr_shutdown,
-	.enable		= ar5315_gpio_intr_enable,
-	.disable	= ar5315_gpio_intr_disable,
-	.ack		= ar5315_gpio_intr_ack,
-	.end		= ar5315_gpio_intr_end,
-};
-
-
-/* Enable the specified AR531X_MISC_IRQ interrupt */
-static void
-ar5315_misc_intr_enable(unsigned int irq)
-{
-	unsigned int imr;
-
-	imr = sysRegRead(AR5315_IMR);
-	switch(irq)
-	{
-	   case AR531X_MISC_IRQ_SPI:
-		 imr |= AR5315_ISR_SPI;
-		 break;
-
-	   case AR531X_MISC_IRQ_TIMER:
-	     imr |= AR5315_ISR_TIMER;
-	     break;
-
-	   case AR531X_MISC_IRQ_AHB_PROC:
-	     imr |= AR5315_ISR_AHB;
-	     break;
-
-	   case AR531X_MISC_IRQ_AHB_DMA:
-	     imr |= 0/* ?? */;
-	     break;
-
-	   case	AR531X_MISC_IRQ_GPIO:
-	     imr |= AR5315_ISR_GPIO;
-	     break;
-
-	   case AR531X_MISC_IRQ_UART0:
-	     imr |= AR5315_ISR_UART0;
-	     break;
-
-
-	   case	AR531X_MISC_IRQ_WATCHDOG:
-	     imr |= AR5315_ISR_WD;
-	     break;
-
-	   case AR531X_MISC_IRQ_LOCAL:
-	     imr |= 0/* ?? */;
-	     break;
-
-	}
-	sysRegWrite(AR5315_IMR, imr);
-	imr=sysRegRead(AR5315_IMR); /* flush write buffer */
-}
-
-/* Disable the specified AR531X_MISC_IRQ interrupt */
-static void
-ar5315_misc_intr_disable(unsigned int irq)
-{
-	unsigned int imr;
-
-	imr = sysRegRead(AR5315_IMR);
-	switch(irq)
-	{
-	   case AR531X_MISC_IRQ_SPI:
-		 imr &= ~AR5315_ISR_SPI;
-		 break;
-
-	   case AR531X_MISC_IRQ_TIMER:
-	     imr &= (~AR5315_ISR_TIMER);
-	     break;
-
-	   case AR531X_MISC_IRQ_AHB_PROC:
-	     imr &= (~AR5315_ISR_AHB);
-	     break;
-
-	   case AR531X_MISC_IRQ_AHB_DMA:
-	     imr &= 0/* ?? */;
-	     break;
-
-	   case	AR531X_MISC_IRQ_GPIO:
-	     imr &= ~AR5315_ISR_GPIO;
-	     break;
-
-	   case AR531X_MISC_IRQ_UART0:
-	     imr &= (~AR5315_ISR_UART0);
-	     break;
-
-	   case	AR531X_MISC_IRQ_WATCHDOG:
-	     imr &= (~AR5315_ISR_WD);
-	     break;
-
-	   case AR531X_MISC_IRQ_LOCAL:
-	     imr &= ~0/* ?? */;
-	     break;
-
-	}
-	sysRegWrite(AR5315_IMR, imr);
-	sysRegRead(AR5315_IMR); /* flush write buffer */
-}
-
-/* Turn on the specified AR531X_MISC_IRQ interrupt */
-static unsigned int
-ar5315_misc_intr_startup(unsigned int irq)
-{
-	ar5315_misc_intr_enable(irq);
-	return 0;
-}
-
-/* Turn off the specified AR531X_MISC_IRQ interrupt */
-static void
-ar5315_misc_intr_shutdown(unsigned int irq)
-{
-	ar5315_misc_intr_disable(irq);
-}
-
-static void
-ar5315_misc_intr_ack(unsigned int irq)
-{
-	ar5315_misc_intr_disable(irq);
-}
-
-static void
-ar5315_misc_intr_end(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		ar5315_misc_intr_enable(irq);
-}
-
-static struct irq_chip ar5315_misc_intr_controller = {
-	.typename	= "AR5315 misc",
-	.startup	= ar5315_misc_intr_startup,
-	.shutdown	= ar5315_misc_intr_shutdown,
-	.enable		= ar5315_misc_intr_enable,
-	.disable	= ar5315_misc_intr_disable,
-	.ack		= ar5315_misc_intr_ack,
-	.end		= ar5315_misc_intr_end,
-};
-
-static irqreturn_t ar5315_ahb_proc_handler(int cpl, void *dev_id)
-{
-    sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET);
-    sysRegRead(AR5315_AHB_ERR1);
-
-    printk("AHB fatal error\n");
-    machine_restart("AHB error"); /* Catastrophic failure */
-
-    return IRQ_HANDLED;
-}
-
-static struct irqaction ar5315_ahb_proc_interrupt  = {
-	.handler	= ar5315_ahb_proc_handler,
-	.flags		= IRQF_DISABLED,
-	.name		= "ar5315_ahb_proc_interrupt",
-};
-
-
-static struct irqaction cascade  = {
-	.handler	= no_action,
-	.flags		= IRQF_DISABLED,
-	.name		= "cascade",
-};
-
-static void ar5315_gpio_intr_init(int irq_base)
-{
-	int i;
-
-	for (i = irq_base; i < irq_base + AR531X_GPIO_IRQ_COUNT; i++) {
-		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = NULL;
-		irq_desc[i].depth = 1;
-		irq_desc[i].chip = &ar5315_gpio_intr_controller;
-	}
-	setup_irq(AR531X_MISC_IRQ_GPIO, &cascade);
-	gpiointval = sysRegRead(AR5315_GPIO_DI);
-}
-
-void ar5315_misc_intr_init(int irq_base)
-{
-	int i;
-
-	for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) {
-		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = NULL;
-		irq_desc[i].depth = 1;
-		irq_desc[i].chip = &ar5315_misc_intr_controller;
-	}
-	setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5315_ahb_proc_interrupt);
-	setup_irq(AR5315_IRQ_MISC_INTRS, &cascade);
-	ar5315_gpio_intr_init(AR531X_GPIO_IRQ_BASE);
-}
-
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/pci.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/pci.c
deleted file mode 100644
index 166fa1cf97..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/pci.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <asm/bootinfo.h>
-#include <asm/paccess.h>
-#include <asm/irq_cpu.h>
-#include <asm/io.h>
-#include "ar531x.h"
-
-#define AR531X_MEM_BASE    0x80800000UL
-#define AR531X_MEM_SIZE    0x00ffffffUL
-#define AR531X_IO_SIZE     0x00007fffUL
-#define IDSEL_SHIFT	13
-
-static spinlock_t ar531x_pci_lock = SPIN_LOCK_UNLOCKED;
-static u32 cfgaddr;
-
-static int config_access(int busno, int dev, int func, int where, int size, u32 ptr, int write)
-{
-	u32 address;      /* Address to read from */
-	u32 reg;
-	unsigned long flags;
-	int ret = -1;
-	if ((busno != 0) || ((dev != 0) && (dev != 3)) || (func > 2))
-		return ret;
-
-	spin_lock_irqsave(&ar531x_pci_lock, flags);
-
-	/* Select Configuration access */
-	reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
-	reg |= AR5315_PCIMISC_CFG_SEL;
-	sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
-	(void)sysRegRead(AR5315_PCI_MISC_CONFIG);
-
-	address = (u32)cfgaddr + (1 << (IDSEL_SHIFT + dev)) + (func << 8) + where;
-
-	if (size == 1)
-		address ^= 0x3;
-	else if (size == 2)
-		address ^= 0x2;
-
-	if (write) {
-		if (size == 1)
-			ret = put_dbe(ptr, (u8 *) address);
-		else if (size == 2)
-			ret = put_dbe(ptr, (u16 *) address);
-		else if (size == 4)
-			ret = put_dbe(ptr, (u32 *) address);
-	} else {
-		if (size == 1)
-			ret = get_dbe(*((u32 *)ptr), (u8 *) address);
-		else if (size == 2)
-			ret = get_dbe(*((u32 *)ptr), (u16 *) address);
-		else if (size == 4)
-			ret = get_dbe(*((u32 *)ptr), (u32 *) address);
-	}
-
-	/* Select Memory access */
-	reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
-	reg &= ~AR5315_PCIMISC_CFG_SEL;
-	sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
-	(void)sysRegRead(AR5315_PCI_MISC_CONFIG);
-
-	spin_unlock_irqrestore(&ar531x_pci_lock, flags);
-
-	if (ret) {
-		*((u32 *)ptr) = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int ar531x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value)
-{
-	return config_access(bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, (u32) value, 0);
-}
-
-static int ar531x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
-{
-	return config_access(bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, value, 1);
-}
-
-struct pci_ops ar531x_pci_ops = {
-	.read	= ar531x_pci_read,
-	.write	= ar531x_pci_write,
-};
-
-static struct resource ar531x_mem_resource = {
-	.name	= "AR531x PCI MEM",
-	.start	= AR531X_MEM_BASE,
-	.end	= AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE - 1 + 0x4000000,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct resource ar531x_io_resource = {
-	.name	= "AR531x PCI I/O",
-	.start	= AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE,
-	.end	= AR531X_MEM_BASE + AR531X_MEM_SIZE - 1,
-	.flags	= IORESOURCE_IO,
-};
-
-struct pci_controller ar531x_pci_controller = {
-	.pci_ops		= &ar531x_pci_ops,
-	.mem_resource	= &ar531x_mem_resource,
-	.io_resource	= &ar531x_io_resource,
-	.mem_offset     = 0x00000000UL,
-	.io_offset      = 0x00000000UL,
-};
-
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return AR5315_IRQ_LCBUS_PCI;
-}
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	u32 reg;
-
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 5);
-	pci_write_config_word(dev, 0x40, 0);
-
-	/* Clear any pending Abort or external Interrupts 
-	 * and enable interrupt processing */
-	reg = sysRegRead(AR5315_PCI_INTEN_REG);
-	reg &= ~AR5315_PCI_INT_ENABLE;
-	sysRegWrite(AR5315_PCI_INTEN_REG, reg);
-
-	reg = sysRegRead(AR5315_PCI_INT_STATUS);
-	reg |= (AR5315_PCI_ABORT_INT | AR5315_PCI_EXT_INT);
-	sysRegWrite(AR5315_PCI_INT_STATUS, reg);
-
-	reg = sysRegRead(AR5315_PCI_INT_MASK);
-	reg |= (AR5315_PCI_EXT_INT | AR5315_PCI_ABORT_INT);
-	sysRegWrite(AR5315_PCI_INT_MASK, reg);
-
-	reg = sysRegRead(AR5315_PCI_INTEN_REG);
-	reg |= AR5315_PCI_INT_ENABLE;
-	sysRegWrite(AR5315_PCI_INTEN_REG, reg);
-
-	return 0;
-}
-
-static void ar5315_pci_fixup(struct pci_dev *dev)
-{
-	struct pci_bus *bus = dev->bus;
-
-	if ((PCI_SLOT(dev->devfn) != 3) || (PCI_FUNC(dev->devfn) != 0) || (bus->number != 0))
-		return;
-
-#define _DEV	bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)
-	printk("PCI: fixing up device %d,%d,%d\n", _DEV);
-	/* fix up mbars */
-	config_access(_DEV, PCI_BASE_ADDRESS_0, 4, HOST_PCI_MBAR0, 1);
-	config_access(_DEV, PCI_BASE_ADDRESS_1, 4, HOST_PCI_MBAR1, 1);
-	config_access(_DEV, PCI_BASE_ADDRESS_2, 4, HOST_PCI_MBAR2, 1);
-	config_access(_DEV, PCI_COMMAND, 4,
-		PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER|PCI_COMMAND_SPECIAL|
-		PCI_COMMAND_INVALIDATE|PCI_COMMAND_PARITY|PCI_COMMAND_SERR|
-		PCI_COMMAND_FAST_BACK, 1);
-#undef _DEV
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, ar5315_pci_fixup);
-
-int __init ar5315_pci_init(void)
-{
-	u32 reg;
-
-	if (mips_machtype != MACH_ATHEROS_AR2315)
-		return -ENODEV;
-
-	printk("AR531x PCI init... \n");
-
-	cfgaddr = (u32) ioremap_nocache(0x80000000, 1*1024*1024); /* Remap PCI config space */
-	ar531x_pci_controller.io_map_base =
-		(unsigned long) ioremap_nocache(AR531X_MEM_BASE + AR531X_MEM_SIZE, AR531X_IO_SIZE);
-	set_io_port_base(ar531x_pci_controller.io_map_base); /* PCI I/O space */
-
-	reg = sysRegRead(AR5315_RESET);
-	sysRegWrite(AR5315_RESET, reg | AR5315_RESET_PCIDMA);
-
-	udelay(10*1000);
-
-	sysRegWrite(AR5315_RESET, reg & ~AR5315_RESET_PCIDMA);
-	sysRegRead(AR5315_RESET);     /* read after */
-
-	udelay(10*1000);
-
-	reg = sysRegRead(AR5315_ENDIAN_CTL);
-	reg |= AR5315_CONFIG_PCIAHB | AR5315_CONFIG_PCIAHB_BRIDGE;
-
-	sysRegWrite(AR5315_ENDIAN_CTL, reg);
-
-	reg = sysRegRead(AR5315_PCICLK);
-	reg = 4;
-	sysRegWrite(AR5315_PCICLK, reg);
-
-	reg = sysRegRead(AR5315_AHB_ARB_CTL);
-	reg |= (ARB_PCI);
-	sysRegWrite(AR5315_AHB_ARB_CTL, reg);
-
-	reg = sysRegRead(AR5315_IF_CTL);
-	reg &= ~(IF_PCI_CLK_MASK | IF_MASK);
-	reg |= (IF_PCI | IF_PCI_HOST | IF_PCI_INTR | (IF_PCI_CLK_OUTPUT_CLK << IF_PCI_CLK_SHIFT));
-
-	sysRegWrite(AR5315_IF_CTL, reg);
-
-	/* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */
-	reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
-	reg &= ~(AR5315_PCIMISC_RST_MODE);
-	reg |= AR5315_PCIRST_LOW;
-	sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
-
-	/* wait for 100 ms */
-	udelay(100*1000);
-
-	/* Bring the PCI out of reset */
-	reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
-	reg &= ~(AR5315_PCIMISC_RST_MODE);
-	reg |= (AR5315_PCIRST_HIGH | AR5315_PCICACHE_DIS | 0x8);
-	sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
-
-	sysRegWrite(AR5315_PCI_UNCACHE_CFG,
-			0x1E | /* 1GB uncached */
-			(1 << 5) | /* Enable uncached */
-			(0x2 << 30) /* Base: 0x80000000 */
-	);
-	(void)sysRegRead(AR5315_PCI_UNCACHE_CFG); /* flush */
-
-	udelay(500*1000);
-
-	/* dirty hack - anyone with a datasheet that knows the memory map ? */
-	ioport_resource.start = 0x10000000;
-	ioport_resource.end = 0xffffffff;
-	iomem_resource.start = 0x10000000;
-	iomem_resource.end = 0xffffffff;
-
-	register_pci_controller(&ar531x_pci_controller);
-
-	printk("done\n");
-	return 0;
-}
-
-arch_initcall(ar5315_pci_init);
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/board.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/board.c
deleted file mode 100644
index 4a224933ae..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/board.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
- * Copyright (C) 2006 FON Technology, SL.
- * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- */
-
-/*
- * Platform devices for Atheros SoCs
- */
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/random.h>
-#include <asm/bootinfo.h>
-#include <asm/irq_cpu.h>
-#include <asm/io.h>
-#include <ar531x.h>
-
-char *board_config = NULL;
-char *radio_config = NULL;
-int broken_boarddata = 0;
-
-extern int early_serial_setup(struct uart_port *port);
-
-static inline bool
-check_radio_magic(unsigned char *addr)
-{
-	addr += 0x7a; /* offset for flash magic */
-	if ((addr[0] == 0x5a) && (addr[1] == 0xa5)) {
-		return 1;
-	}
-	return 0;
-}
-
-static inline bool
-check_board_data(unsigned char *flash_limit, unsigned char *addr, bool broken)
-{
-	/* config magic found */
-	if ( *(int *)addr == 0x35333131)
-		return 1;
-
-	if (!broken)
-		return 0;
-
-	if (check_radio_magic(addr + 0xf8))
-		radio_config = addr + 0xf8;
-	if ((addr < flash_limit + 0x10000) &&
-	     check_radio_magic(addr + 0x10000))
-		radio_config = addr + 0x10000;
-
-	if (radio_config) {
-		/* broken board data detected, use radio data to find the offset,
-		 * user will fix this */
-		broken_boarddata = 1;
-		return 1;
-	}
-	return 0;
-}
-
-static u8 *find_board_config(char *flash_limit, bool broken)
-{
-	char *addr;
-	int found = 0;
-
-	for (addr = (char *) (flash_limit - 0x1000);
-		addr >= (char *) (flash_limit - 0x30000);
-		addr -= 0x1000) {
-
-		if (check_board_data(flash_limit, addr, broken)) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (!found)
-		addr = NULL;
-
-	return addr;
-}
-
-static u8 *find_radio_config(char *flash_limit, char *board_config)
-{
-	int dataFound;
-	char *radio_config;
-
-	/*
-	 * Now find the start of Radio Configuration data, using heuristics:
-	 * Search forward from Board Configuration data by 0x1000 bytes
-	 * at a time until we find non-0xffffffff.
-	 */
-	dataFound = 0;
-	for (radio_config = board_config + 0x1000;
-	     (radio_config < flash_limit);
-	     radio_config += 0x1000) {
-		if ((*(u32 *)radio_config != 0xffffffff) &&
-		    check_radio_magic(radio_config)) {
-			dataFound = 1;
-			break;
-		}
-	}
-
-#ifdef CONFIG_ATHEROS_AR5315
-	if (!dataFound) { /* AR2316 relocates radio config to new location */
-	    for (radio_config = board_config + 0xf8;
-	     	(radio_config < flash_limit - 0x1000 + 0xf8);
-			 radio_config += 0x1000) {
-			if ((*(u32 *)radio_config != 0xffffffff) &&
-				check_radio_magic(radio_config)) {
-				dataFound = 1;
-				break;
-			}
-	    }
-	}
-#endif
-
-	if (!dataFound) {
-		printk("Could not find Radio Configuration data\n");
-		radio_config = 0;
-	}
-
-	return (u8 *) radio_config;
-}
-
-int __init ar531x_find_config(char *flash_limit)
-{
-	struct ar531x_boarddata *bd;
-	unsigned int rcfg_size;
-	char *bcfg, *rcfg;
-
-	/* Copy the board and radio data to RAM, because with the new
-	 * spiflash driver, accessing the mapped memory directly is no
-	 * longer safe */
-
-	bcfg = find_board_config(flash_limit, false);
-	if (!bcfg)
-		bcfg = find_board_config(flash_limit, true);
-	if (!bcfg) {
-		printk("WARNING: No board configuration data found!\n");
-		return -ENODEV;
-	}
-
-	board_config = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
-	memcpy(board_config, bcfg, 0x100);
-	if (broken_boarddata) {
-		printk("WARNING: broken board data detected\n");
-		bd = (struct ar531x_boarddata *)board_config;
-		if (!memcmp(bd->enet0Mac, "\x00\x00\x00\x00\x00\x00", 6)) {
-			printk("Fixing up empty mac addresses\n");
-			bd->enet0Mac[1] = 0x13;
-			bd->enet0Mac[2] = 0x37;
-			get_random_bytes(bd->enet0Mac + 3, 3);
-			bd->wlan0Mac[1] = 0x13;
-			bd->wlan0Mac[2] = 0x37;
-			get_random_bytes(bd->wlan0Mac + 3, 3);
-		}
-	}
-
-
-	/* Radio config starts 0x100 bytes after board config, regardless
-	 * of what the physical layout on the flash chip looks like */
-
-	if (radio_config)
-		rcfg = radio_config;
-	else
-		rcfg = find_radio_config(flash_limit, bcfg);
-
-	if (!rcfg)
-		return -ENODEV;
-
-	radio_config = board_config + 0x100 + ((rcfg - bcfg) & 0xfff);
-	printk("Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, radio_config - board_config);
-	rcfg_size = BOARD_CONFIG_BUFSZ - (radio_config - board_config);
-	memcpy(radio_config, rcfg, rcfg_size);
-
-	return 0;
-}
-
-void __init serial_setup(unsigned long mapbase, unsigned int uartclk)
-{
-	struct uart_port s;
-
-	memset(&s, 0, sizeof(s));
-
-	s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	s.iotype = UPIO_MEM;
-	s.irq = AR531X_MISC_IRQ_UART0;
-	s.regshift = 2;
-	s.mapbase = mapbase;
-	s.uartclk = uartclk;
-	s.membase = (void __iomem *)s.mapbase;
-
-	early_serial_setup(&s);
-}
-
-void __init plat_mem_setup(void)
-{
-	DO_AR5312(ar5312_plat_setup();)
-	DO_AR5315(ar5315_plat_setup();)
-
-	/* Disable data watchpoints */
-	write_c0_watchlo0(0);
-}
-
-const char *get_system_type(void)
-{
-	switch (mips_machtype) {
-#ifdef CONFIG_ATHEROS_AR5312
-	case MACH_ATHEROS_AR5312:
-		return "Atheros AR5312";
-
-	case MACH_ATHEROS_AR2312:
-		return "Atheros AR2312";
-
-	case MACH_ATHEROS_AR2313:
-		return "Atheros AR2313";
-#endif
-#ifdef CONFIG_ATHEROS_AR5315
-	case MACH_ATHEROS_AR2315:
-		return "Atheros AR2315";
-	case MACH_ATHEROS_AR2316:
-		return "Atheros AR2316";
-	case MACH_ATHEROS_AR2317:
-		return "Atheros AR2317";
-	case MACH_ATHEROS_AR2318:
-		return "Atheros AR2318";
-#endif
-	}
-	return "Atheros (unknown)";
-}
-
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
-void __init plat_timer_setup(struct irqaction *irq)
-{
-	unsigned int count;
-
-	/* Usually irq is timer_irqaction (timer_interrupt) */
-	setup_irq(AR531X_IRQ_CPU_CLOCK, irq);
-
-	/* to generate the first CPU timer interrupt */
-	count = read_c0_count();
-	write_c0_compare(count + 1000);
-}
-#endif
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	DO_AR5312(ar5312_irq_dispatch();)
-	DO_AR5315(ar5315_irq_dispatch();)
-}
-
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24))
-void (*board_time_init)(void);
-void __init plat_time_init(void) {
-    board_time_init();
-}
-#endif
-
-void __init arch_init_irq(void)
-{
-	clear_c0_status(ST0_IM);
-	mips_cpu_irq_init();
-
-	/* Initialize interrupt controllers */
-	DO_AR5312(ar5312_misc_intr_init(AR531X_MISC_IRQ_BASE);)
-	DO_AR5315(ar5315_misc_intr_init(AR531X_MISC_IRQ_BASE);)
-}
-
-static int __init ar531x_register_gpiodev(void)
-{
-	static struct resource res = {
-		.start = 0xFFFFFFFF,
-	};
-	struct platform_device *pdev;
-
-	printk(KERN_INFO "ar531x: Registering GPIODEV device\n");
-
-	pdev = platform_device_register_simple("GPIODEV", 0, &res, 1);
-
-	if (!pdev) {
-		printk(KERN_ERR "ar531x: GPIODEV init failed\n");
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-device_initcall(ar531x_register_gpiodev);
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/prom.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/prom.c
deleted file mode 100644
index 82617cdd3c..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/prom.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright MontaVista Software Inc
- * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
- * Copyright (C) 2006 FON Technology, SL.
- * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- */
-
-/*
- * Prom setup file for ar531x
- */
-
-#include <linux/init.h>
-#include <linux/autoconf.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <ar531x.h>
-
-void __init prom_init(void)
-{
-	char **argv;
-
-	mips_machtype = -1;
-
-	DO_AR5312(ar5312_prom_init();)
-	DO_AR5315(ar5315_prom_init();)
-#if 0
-	argv = (char **)fw_arg1;
-	/* RedBoot desired command line is argv[1] */
-	strcat(arcs_cmdline, argv[1]);
-#endif
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/reset.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/reset.c
deleted file mode 100644
index eb525da207..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/reset.c
+++ /dev/null
@@ -1,162 +0,0 @@
-#include <linux/module.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/kobject.h>
-#include <linux/workqueue.h>
-#include <linux/skbuff.h>
-#include <linux/netlink.h>
-#include <net/sock.h>
-#include <asm/uaccess.h>
-#include <ar531x.h>
-
-#define AR531X_RESET_GPIO_IRQ	(AR531X_GPIO_IRQ(bcfg->resetConfigGpio))
-
-struct event_t {
-	struct work_struct wq;
-	int set;
-	unsigned long jiffies;
-};
-
-static struct ar531x_boarddata *bcfg;
-static struct timer_list rst_button_timer;
-
-extern struct sock *uevent_sock;
-extern u64 uevent_next_seqnum(void);
-static unsigned long seen;
-
-static inline void add_msg(struct sk_buff *skb, char *msg)
-{
-	char *scratch;
-	scratch = skb_put(skb, strlen(msg) + 1);
-	sprintf(scratch, msg);
-}
-
-static void hotplug_button(struct work_struct *wq)
-{
-	struct sk_buff *skb;
-	struct event_t *event;
-	size_t len;
-	char *scratch, *s;
-	char buf[128];
-
-	event = container_of(wq, struct event_t, wq);
-	if (!uevent_sock)
-		goto done;
-
-	/* allocate message with the maximum possible size */
-	s = event->set ? "pressed" : "released";
-	len = strlen(s) + 2;
-	skb = alloc_skb(len + 2048, GFP_KERNEL);
-	if (!skb)
-		goto done;
-
-	/* add header */
-	scratch = skb_put(skb, len);
-	sprintf(scratch, "%s@",s);
-
-	/* copy keys to our continuous event payload buffer */
-	add_msg(skb, "HOME=/");
-	add_msg(skb, "PATH=/sbin:/bin:/usr/sbin:/usr/bin");
-	add_msg(skb, "SUBSYSTEM=button");
-	add_msg(skb, "BUTTON=reset");
-	add_msg(skb, (event->set ? "ACTION=pressed" : "ACTION=released"));
-	sprintf(buf, "SEEN=%ld", (event->jiffies - seen)/HZ);
-	add_msg(skb, buf);
-	snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum());
-	add_msg(skb, buf);
-
-	NETLINK_CB(skb).dst_group = 1;
-	netlink_broadcast(uevent_sock, skb, 0, 1, GFP_KERNEL);
-
-done:
-	kfree(event);
-}
-
-static int no_release_workaround = 1;
-
-static void
-reset_button_poll(unsigned long unused)
-{
-	struct event_t *event;
-	int gpio = ~0;
-
-	if(!no_release_workaround)
-		return;
-
-	DO_AR5315(gpio = sysRegRead(AR5315_GPIO_DI);)
-    gpio &= 1 << (AR531X_RESET_GPIO_IRQ - AR531X_GPIO_IRQ_BASE);
-	if(gpio)
-	{
-		rst_button_timer.expires = jiffies + (HZ / 4);
-		add_timer(&rst_button_timer);
-	} else {
-		event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
-		if (!event)
-		{
-			printk("Could not alloc hotplug event\n");
-			return;
-		}
-		event->set = 0;
-		event->jiffies = jiffies;
-		INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
-		schedule_work(&event->wq);
-	}
-}
-
-static irqreturn_t button_handler(int irq, void *dev_id)
-{
-	static int pressed = 0;
-	struct event_t *event;
-	u32 gpio = ~0;
-
-	event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
-	if (!event)
-		return IRQ_NONE;
-
-	pressed = !pressed;
-
-	DO_AR5315(gpio = sysRegRead(AR5315_GPIO_DI);)
-	gpio &= 1 << (irq - AR531X_GPIO_IRQ_BASE);
-
-	event->set = gpio;
-	if(!event->set)
-		no_release_workaround = 0;
-
-	event->jiffies = jiffies;
-
-	INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
-	schedule_work(&event->wq);
-
-	seen = jiffies;
-	if(event->set && no_release_workaround)
-		mod_timer(&rst_button_timer, jiffies + (HZ / 4));
-
-	return IRQ_HANDLED;
-}
-
-void ar531x_disable_reset_button(void)
-{
-	disable_irq(AR531X_RESET_GPIO_IRQ);
-}
-
-EXPORT_SYMBOL(ar531x_disable_reset_button);
-
-int __init ar531x_init_reset(void)
-{
-	bcfg = (struct ar531x_boarddata *) board_config;
-
-	seen = jiffies;
-
-	init_timer(&rst_button_timer);
-	rst_button_timer.function = reset_button_poll;
-	rst_button_timer.expires = jiffies + HZ / 50;
-	add_timer(&rst_button_timer);
-
-	request_irq(AR531X_RESET_GPIO_IRQ, &button_handler, IRQF_SAMPLE_RANDOM, "ar531x_reset", NULL);
-
-	return 0;
-}
-
-
-
-module_init(ar531x_init_reset);
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5312/ar5312.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5312/ar5312.h
deleted file mode 100644
index afa3aefdad..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5312/ar5312.h
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
- * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- */
-
-#ifndef AR5312_H
-#define AR5312_H
-
-#include <asm/addrspace.h>
-
-/*
- * IRQs
- */
-
-#define AR5312_IRQ_WLAN0_INTRS  MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
-#define AR5312_IRQ_ENET0_INTRS  MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
-#define AR5312_IRQ_ENET1_INTRS  MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
-#define AR5312_IRQ_WLAN1_INTRS  MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
-#define AR5312_IRQ_MISC_INTRS   MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-
-
-/* Address Map */
-#define AR531X_WLAN0            0x18000000
-#define AR531X_WLAN1            0x18500000
-#define AR531X_ENET0            0x18100000
-#define AR531X_ENET1            0x18200000
-#define AR531X_SDRAMCTL         0x18300000
-#define AR531X_FLASHCTL         0x18400000
-#define AR531X_APBBASE		0x1c000000
-#define AR531X_FLASH            0x1e000000
-#define AR531X_UART0            0xbc000003      /* UART MMR */
-
-/*
- * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
- * should be considered available.  The AR5312 supports 2 enet MACS,
- * even though many reference boards only actually use 1 of them
- * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
- * The AR2312 supports 1 enet MAC.
- */
-#define AR531X_NUM_ENET_MAC             2
-
-/*
- * Need these defines to determine true number of ethernet MACs
- */
-#define AR5212_AR5312_REV2      0x0052          /* AR5312 WMAC (AP31) */
-#define AR5212_AR5312_REV7      0x0057          /* AR5312 WMAC (AP30-040) */
-#define AR5212_AR2313_REV8      0x0058          /* AR2313 WMAC (AP43-030) */
-#define AR531X_RADIO_MASK_OFF  0xc8
-#define AR531X_RADIO0_MASK     0x0003
-#define AR531X_RADIO1_MASK     0x000c
-#define AR531X_RADIO1_S        2
-
-/*
- * AR531X_NUM_WMAC defines the number of Wireless MACs that\
- * should be considered available.
- */
-#define AR531X_NUM_WMAC                 2
-
-/* Reset/Timer Block Address Map */
-#define AR531X_RESETTMR		(AR531X_APBBASE  + 0x3000)
-#define AR531X_TIMER		(AR531X_RESETTMR + 0x0000) /* countdown timer */
-#define AR531X_WD_CTRL          (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
-#define AR531X_WD_TIMER         (AR531X_RESETTMR + 0x000c) /* watchdog timer */
-#define AR531X_ISR		(AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
-#define AR531X_IMR		(AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
-#define AR531X_RESET		(AR531X_RESETTMR + 0x0020)
-#define AR5312_CLOCKCTL1	(AR531X_RESETTMR + 0x0064)
-#define AR5312_SCRATCH   	(AR531X_RESETTMR + 0x006c)
-#define AR531X_PROCADDR		(AR531X_RESETTMR + 0x0070)
-#define AR531X_PROC1		(AR531X_RESETTMR + 0x0074)
-#define AR531X_DMAADDR		(AR531X_RESETTMR + 0x0078)
-#define AR531X_DMA1		(AR531X_RESETTMR + 0x007c)
-#define AR531X_ENABLE           (AR531X_RESETTMR + 0x0080) /* interface enb */
-#define AR531X_REV		(AR531X_RESETTMR + 0x0090) /* revision */
-
-/* AR531X_WD_CTRL register bit field definitions */
-#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
-#define AR531X_WD_CTRL_NMI               0x0001
-#define AR531X_WD_CTRL_RESET             0x0002
-
-/* AR531X_ISR register bit field definitions */
-#define AR531X_ISR_NONE		0x0000
-#define AR531X_ISR_TIMER	0x0001
-#define AR531X_ISR_AHBPROC	0x0002
-#define AR531X_ISR_AHBDMA	0x0004
-#define AR531X_ISR_GPIO		0x0008
-#define AR531X_ISR_UART0	0x0010
-#define AR531X_ISR_UART0DMA	0x0020
-#define AR531X_ISR_WD		0x0040
-#define AR531X_ISR_LOCAL	0x0080
-
-/* AR531X_RESET register bit field definitions */
-#define AR531X_RESET_SYSTEM     0x00000001  /* cold reset full system */
-#define AR531X_RESET_PROC       0x00000002  /* cold reset MIPS core */
-#define AR531X_RESET_WLAN0      0x00000004  /* cold reset WLAN MAC and BB */
-#define AR531X_RESET_EPHY0      0x00000008  /* cold reset ENET0 phy */
-#define AR531X_RESET_EPHY1      0x00000010  /* cold reset ENET1 phy */
-#define AR531X_RESET_ENET0      0x00000020  /* cold reset ENET0 mac */
-#define AR531X_RESET_ENET1      0x00000040  /* cold reset ENET1 mac */
-#define AR531X_RESET_UART0      0x00000100  /* cold reset UART0 (high speed) */
-#define AR531X_RESET_WLAN1      0x00000200  /* cold reset WLAN MAC/BB */
-#define AR531X_RESET_APB        0x00000400  /* cold reset APB (ar5312) */
-#define AR531X_RESET_WARM_PROC  0x00001000  /* warm reset MIPS core */
-#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000  /* warm reset WLAN0 MAC */
-#define AR531X_RESET_WARM_WLAN0_BB  0x00004000  /* warm reset WLAN0 BaseBand */
-#define AR531X_RESET_NMI        0x00010000  /* send an NMI to the processor */
-#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000  /* warm reset WLAN1 mac */
-#define AR531X_RESET_WARM_WLAN1_BB  0x00040000  /* warm reset WLAN1 baseband */
-#define AR531X_RESET_LOCAL_BUS  0x00080000  /* reset local bus */
-#define AR531X_RESET_WDOG       0x00100000  /* last reset was a watchdog */
-
-#define AR531X_RESET_WMAC0_BITS \
-        AR531X_RESET_WLAN0 |\
-        AR531X_RESET_WARM_WLAN0_MAC |\
-        AR531X_RESET_WARM_WLAN0_BB
-
-#define AR531X_RESERT_WMAC1_BITS \
-        AR531X_RESET_WLAN1 |\
-        AR531X_RESET_WARM_WLAN1_MAC |\
-        AR531X_RESET_WARM_WLAN1_BB
-
-/* AR5312_CLOCKCTL1 register bit field definitions */
-#define AR5312_CLOCKCTL1_PREDIVIDE_MASK    0x00000030
-#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT            4
-#define AR5312_CLOCKCTL1_MULTIPLIER_MASK   0x00001f00
-#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT           8
-#define AR5312_CLOCKCTL1_DOUBLER_MASK      0x00010000
-
-/* Valid for AR5312 and AR2312 */
-#define AR5312_CLOCKCTL1_PREDIVIDE_MASK    0x00000030
-#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT            4
-#define AR5312_CLOCKCTL1_MULTIPLIER_MASK   0x00001f00
-#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT           8
-#define AR5312_CLOCKCTL1_DOUBLER_MASK      0x00010000
-
-/* Valid for AR2313 */
-#define AR2313_CLOCKCTL1_PREDIVIDE_MASK    0x00003000
-#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT           12
-#define AR2313_CLOCKCTL1_MULTIPLIER_MASK   0x001f0000
-#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT          16
-#define AR2313_CLOCKCTL1_DOUBLER_MASK      0x00000000
-
-
-/* AR531X_ENABLE register bit field definitions */
-#define AR531X_ENABLE_WLAN0              0x0001
-#define AR531X_ENABLE_ENET0              0x0002
-#define AR531X_ENABLE_ENET1              0x0004
-#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008   /* UART, and WLAN1 PIOs */
-#define AR531X_ENABLE_WLAN1_DMA          0x0010   /* WLAN1 DMAs */
-#define AR531X_ENABLE_WLAN1 \
-            (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
-
-/* AR531X_REV register bit field definitions */
-#define AR531X_REV_WMAC_MAJ    0xf000
-#define AR531X_REV_WMAC_MAJ_S  12
-#define AR531X_REV_WMAC_MIN    0x0f00
-#define AR531X_REV_WMAC_MIN_S  8
-#define AR531X_REV_MAJ         0x00f0
-#define AR531X_REV_MAJ_S       4
-#define AR531X_REV_MIN         0x000f
-#define AR531X_REV_MIN_S       0
-#define AR531X_REV_CHIP        (AR531X_REV_MAJ|AR531X_REV_MIN)
-
-/* Major revision numbers, bits 7..4 of Revision ID register */
-#define AR531X_REV_MAJ_AR5312          0x4
-#define AR531X_REV_MAJ_AR2313          0x5
-
-/* Minor revision numbers, bits 3..0 of Revision ID register */
-#define AR5312_REV_MIN_DUAL     0x0     /* Dual WLAN version */
-#define AR5312_REV_MIN_SINGLE   0x1     /* Single WLAN version */
-
-/* AR531X_FLASHCTL register bit field definitions */
-#define FLASHCTL_IDCY   0x0000000f      /* Idle cycle turn around time */
-#define FLASHCTL_IDCY_S 0
-#define FLASHCTL_WST1   0x000003e0      /* Wait state 1 */
-#define FLASHCTL_WST1_S 5
-#define FLASHCTL_RBLE   0x00000400      /* Read byte lane enable */
-#define FLASHCTL_WST2   0x0000f800      /* Wait state 2 */
-#define FLASHCTL_WST2_S 11
-#define FLASHCTL_AC     0x00070000      /* Flash address check (added) */
-#define FLASHCTL_AC_S   16
-#define FLASHCTL_AC_128K 0x00000000
-#define FLASHCTL_AC_256K 0x00010000
-#define FLASHCTL_AC_512K 0x00020000
-#define FLASHCTL_AC_1M   0x00030000
-#define FLASHCTL_AC_2M   0x00040000
-#define FLASHCTL_AC_4M   0x00050000
-#define FLASHCTL_AC_8M   0x00060000
-#define FLASHCTL_AC_RES  0x00070000     /* 16MB is not supported */
-#define FLASHCTL_E      0x00080000      /* Flash bank enable (added) */
-#define FLASHCTL_BUSERR 0x01000000      /* Bus transfer error status flag */
-#define FLASHCTL_WPERR  0x02000000      /* Write protect error status flag */
-#define FLASHCTL_WP     0x04000000      /* Write protect */
-#define FLASHCTL_BM     0x08000000      /* Burst mode */
-#define FLASHCTL_MW     0x30000000      /* Memory width */
-#define FLASHCTL_MWx8   0x00000000      /* Memory width x8 */
-#define FLASHCTL_MWx16  0x10000000      /* Memory width x16 */
-#define FLASHCTL_MWx32  0x20000000      /* Memory width x32 (not supported) */
-#define FLASHCTL_ATNR   0x00000000      /* Access type == no retry */
-#define FLASHCTL_ATR    0x80000000      /* Access type == retry every */
-#define FLASHCTL_ATR4   0xc0000000      /* Access type == retry every 4 */
-
-/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices.  */
-#define AR531X_FLASHCTL0        (AR531X_FLASHCTL + 0x00)
-#define AR531X_FLASHCTL1        (AR531X_FLASHCTL + 0x04)
-#define AR531X_FLASHCTL2        (AR531X_FLASHCTL + 0x08)
-
-/* ARM SDRAM Controller -- just enough to determine memory size */
-#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
-#define MEM_CFG1_AC0    0x00000700      /* bank 0: SDRAM addr check (added) */
-#define MEM_CFG1_AC0_S  8
-#define MEM_CFG1_AC1    0x00007000      /* bank 1: SDRAM addr check (added) */
-#define MEM_CFG1_AC1_S  12
-
-/* GPIO Address Map */
-#define AR531X_GPIO         (AR531X_APBBASE  + 0x2000)
-#define AR531X_GPIO_DO      (AR531X_GPIO + 0x00)        /* output register */
-#define AR531X_GPIO_DI      (AR531X_GPIO + 0x04)        /* intput register */
-#define AR531X_GPIO_CR      (AR531X_GPIO + 0x08)        /* control register */
-
-/* GPIO Control Register bit field definitions */
-#define AR531X_GPIO_CR_M(x)    (1 << (x))                      /* mask for i/o */
-#define AR531X_GPIO_CR_O(x)    (0 << (x))                      /* mask for output */
-#define AR531X_GPIO_CR_I(x)    (1 << (x))                      /* mask for input */
-#define AR531X_GPIO_CR_INT(x)  (1 << ((x)+8))                  /* mask for interrupt */
-#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16))                 /* uart multiplex */
-
-#endif
-
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5315/ar5315.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5315/ar5315.h
deleted file mode 100644
index 8ad8810b3c..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5315/ar5315.h
+++ /dev/null
@@ -1,694 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
- * Copyright (C) 2006 FON Technology, SL.
- * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- */
-
-#ifndef AR5315_H
-#define AR5315_H
-
-/*
- * IRQs
- */
-#define AR5315_IRQ_MISC_INTRS   MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
-#define AR5315_IRQ_WLAN0_INTRS  MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
-#define AR5315_IRQ_ENET0_INTRS  MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
-#define AR5315_IRQ_LCBUS_PCI    MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
-#define AR5315_IRQ_WLAN0_POLL   MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-
-
-/*
- * Address map
- */
-#define AR5315_SDRAM0           0x00000000      /* DRAM */
-#define AR5315_SPI_READ         0x08000000      /* SPI FLASH */
-#define AR5315_WLAN0            0xB0000000      /* Wireless MMR */
-#define AR5315_PCI              0xB0100000      /* PCI MMR */
-#define AR5315_SDRAMCTL         0xB0300000      /* SDRAM MMR */
-#define AR5315_LOCAL            0xB0400000      /* LOCAL BUS MMR */
-#define AR5315_ENET0            0xB0500000      /* ETHERNET MMR */
-#define AR5315_DSLBASE          0xB1000000      /* RESET CONTROL MMR */
-#define AR5315_UART0            0xB1100003      /* UART MMR */
-#define AR5315_SPI              0xB1300000      /* SPI FLASH MMR */
-#define AR5315_FLASHBT          0xBfc00000      /* ro boot alias to FLASH */
-#define AR5315_RAM1             0x40000000      /* ram alias */
-#define AR5315_PCIEXT           0x80000000      /* pci external */
-#define AR5315_RAM2             0xc0000000      /* ram alias */
-#define AR5315_RAM3             0xe0000000      /* ram alias */
-
-/*
- * Reset Register
- */
-#define AR5315_COLD_RESET       (AR5315_DSLBASE + 0x0000)
-
-/* Cold Reset */
-#define RESET_COLD_AHB              0x00000001
-#define RESET_COLD_APB              0x00000002
-#define RESET_COLD_CPU              0x00000004
-#define RESET_COLD_CPUWARM          0x00000008
-#define RESET_SYSTEM                (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB)      /* full system */
-
-#define AR5317_RESET_SYSTEM	    0x00000010
-
-/* Warm Reset */
-
-#define AR5315_RESET            (AR5315_DSLBASE + 0x0004)
-
-#define AR5315_RESET_WARM_WLAN0_MAC        0x00000001      /* warm reset WLAN0 MAC */
-#define AR5315_RESET_WARM_WLAN0_BB         0x00000002      /* warm reset WLAN0 BaseBand */
-#define AR5315_RESET_MPEGTS_RSVD           0x00000004      /* warm reset MPEG-TS */
-#define AR5315_RESET_PCIDMA                0x00000008      /* warm reset PCI ahb/dma */
-#define AR5315_RESET_MEMCTL                0x00000010      /* warm reset memory controller */
-#define AR5315_RESET_LOCAL                 0x00000020      /* warm reset local bus */
-#define AR5315_RESET_I2C_RSVD              0x00000040      /* warm reset I2C bus */
-#define AR5315_RESET_SPI                   0x00000080      /* warm reset SPI interface */
-#define AR5315_RESET_UART0                 0x00000100      /* warm reset UART0 */
-#define AR5315_RESET_IR_RSVD               0x00000200      /* warm reset IR interface */
-#define AR5315_RESET_EPHY0                 0x00000400      /* cold reset ENET0 phy */
-#define AR5315_RESET_ENET0                 0x00000800      /* cold reset ENET0 mac */
-
-/*
- * AHB master arbitration control
- */
-#define AR5315_AHB_ARB_CTL      (AR5315_DSLBASE + 0x0008)
-
-#define ARB_CPU                     0x00000001      /* CPU, default */
-#define ARB_WLAN                    0x00000002      /* WLAN */
-#define ARB_MPEGTS_RSVD             0x00000004      /* MPEG-TS */
-#define ARB_LOCAL                   0x00000008      /* LOCAL */
-#define ARB_PCI                     0x00000010      /* PCI */
-#define ARB_ETHERNET                0x00000020      /* Ethernet */
-#define ARB_RETRY                   0x00000100      /* retry policy, debug only */
-
-/*
- * Config Register
- */
-#define AR5315_ENDIAN_CTL       (AR5315_DSLBASE + 0x000c)
-
-#define AR5315_CONFIG_AHB                  0x00000001      /* EC - AHB bridge endianess */
-#define AR5315_CONFIG_WLAN                 0x00000002      /* WLAN byteswap */
-#define AR5315_CONFIG_MPEGTS_RSVD          0x00000004      /* MPEG-TS byteswap */
-#define AR5315_CONFIG_PCI                  0x00000008      /* PCI byteswap */
-#define AR5315_CONFIG_MEMCTL               0x00000010      /* Memory controller endianess */
-#define AR5315_CONFIG_LOCAL                0x00000020      /* Local bus byteswap */
-#define AR5315_CONFIG_ETHERNET             0x00000040      /* Ethernet byteswap */
-
-#define AR5315_CONFIG_MERGE                0x00000200      /* CPU write buffer merge */
-#define AR5315_CONFIG_CPU                  0x00000400      /* CPU big endian */
-#define AR5315_CONFIG_PCIAHB               0x00000800
-#define AR5315_CONFIG_PCIAHB_BRIDGE        0x00001000
-#define AR5315_CONFIG_SPI                  0x00008000      /* SPI byteswap */
-#define AR5315_CONFIG_CPU_DRAM             0x00010000
-#define AR5315_CONFIG_CPU_PCI              0x00020000
-#define AR5315_CONFIG_CPU_MMR              0x00040000
-#define AR5315_CONFIG_BIG                  0x00000400
-
-
-/*
- * NMI control
- */
-#define AR5315_NMI_CTL          (AR5315_DSLBASE + 0x0010)
-
-#define NMI_EN  1
-
-/*
- * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
- */
-#define AR5315_SREV             (AR5315_DSLBASE + 0x0014)
-
-#define AR5315_REV_MAJ                     0x00f0
-#define AR5315_REV_MAJ_S                   4
-#define AR5315_REV_MIN                     0x000f
-#define AR5315_REV_MIN_S                   0
-#define AR5315_REV_CHIP                    (AR5315_REV_MAJ|AR5315_REV_MIN)
-
-/*
- * Interface Enable
- */
-#define AR5315_IF_CTL           (AR5315_DSLBASE + 0x0018)
-
-#define IF_MASK                     0x00000007
-#define IF_DISABLED                 0
-#define IF_PCI                      1
-#define IF_TS_LOCAL                 2
-#define IF_ALL                      3   /* only for emulation with separate pins */
-#define IF_LOCAL_HOST               0x00000008
-#define IF_PCI_HOST                 0x00000010
-#define IF_PCI_INTR                 0x00000020
-#define IF_PCI_CLK_MASK             0x00030000
-#define IF_PCI_CLK_INPUT            0
-#define IF_PCI_CLK_OUTPUT_LOW       1
-#define IF_PCI_CLK_OUTPUT_CLK       2
-#define IF_PCI_CLK_OUTPUT_HIGH      3
-#define IF_PCI_CLK_SHIFT            16
-
-
-/* Major revision numbers, bits 7..4 of Revision ID register */
-#define REV_MAJ_AR5311              0x01
-#define REV_MAJ_AR5312              0x04
-#define REV_MAJ_AR5315              0x0B
-
-/*
- * APB Interrupt control
- */
-
-#define AR5315_ISR              (AR5315_DSLBASE + 0x0020)
-#define AR5315_IMR              (AR5315_DSLBASE + 0x0024)
-#define AR5315_GISR             (AR5315_DSLBASE + 0x0028)
-
-#define AR5315_ISR_UART0                   0x0001           /* high speed UART */
-#define AR5315_ISR_I2C_RSVD                0x0002           /* I2C bus */
-#define AR5315_ISR_SPI                     0x0004           /* SPI bus */
-#define AR5315_ISR_AHB                     0x0008           /* AHB error */
-#define AR5315_ISR_APB                     0x0010           /* APB error */
-#define AR5315_ISR_TIMER                   0x0020           /* timer */
-#define AR5315_ISR_GPIO                    0x0040           /* GPIO */
-#define AR5315_ISR_WD                      0x0080           /* watchdog */
-#define AR5315_ISR_IR_RSVD                 0x0100           /* IR */
-
-#define AR5315_GISR_MISC                   0x0001
-#define AR5315_GISR_WLAN0                  0x0002
-#define AR5315_GISR_MPEGTS_RSVD            0x0004
-#define AR5315_GISR_LOCALPCI               0x0008
-#define AR5315_GISR_WMACPOLL               0x0010
-#define AR5315_GISR_TIMER                  0x0020
-#define AR5315_GISR_ETHERNET               0x0040
-
-/*
- * Interrupt routing from IO to the processor IP bits
- * Define our inter mask and level
- */
-#define AR5315_INTR_MISCIO      SR_IBIT3
-#define AR5315_INTR_WLAN0       SR_IBIT4
-#define AR5315_INTR_ENET0       SR_IBIT5
-#define AR5315_INTR_LOCALPCI    SR_IBIT6
-#define AR5315_INTR_WMACPOLL    SR_IBIT7
-#define AR5315_INTR_COMPARE     SR_IBIT8
-
-/*
- * Timers
- */
-#define AR5315_TIMER            (AR5315_DSLBASE + 0x0030)
-#define AR5315_RELOAD           (AR5315_DSLBASE + 0x0034)
-#define AR5315_WD               (AR5315_DSLBASE + 0x0038)
-#define AR5315_WDC              (AR5315_DSLBASE + 0x003c)
-
-#define WDC_RESET                   0x00000002               /* reset on watchdog */
-#define WDC_NMI                     0x00000001               /* NMI on watchdog */
-#define WDC_IGNORE_EXPIRATION       0x00000000
-
-/*
- * CPU Performance Counters
- */
-#define AR5315_PERFCNT0         (AR5315_DSLBASE + 0x0048)
-#define AR5315_PERFCNT1         (AR5315_DSLBASE + 0x004c)
-
-#define PERF_DATAHIT                0x0001  /* Count Data Cache Hits */
-#define PERF_DATAMISS               0x0002  /* Count Data Cache Misses */
-#define PERF_INSTHIT                0x0004  /* Count Instruction Cache Hits */
-#define PERF_INSTMISS               0x0008  /* Count Instruction Cache Misses */
-#define PERF_ACTIVE                 0x0010  /* Count Active Processor Cycles */
-#define PERF_WBHIT                  0x0020  /* Count CPU Write Buffer Hits */
-#define PERF_WBMISS                 0x0040  /* Count CPU Write Buffer Misses */
-
-#define PERF_EB_ARDY                0x0001  /* Count EB_ARdy signal */
-#define PERF_EB_AVALID              0x0002  /* Count EB_AValid signal */
-#define PERF_EB_WDRDY               0x0004  /* Count EB_WDRdy signal */
-#define PERF_EB_RDVAL               0x0008  /* Count EB_RdVal signal */
-#define PERF_VRADDR                 0x0010  /* Count valid read address cycles */
-#define PERF_VWADDR                 0x0020  /* Count valid write address cycles */
-#define PERF_VWDATA                 0x0040  /* Count valid write data cycles */
-
-/*
- * AHB Error Reporting.
- */
-#define AR5315_AHB_ERR0         (AR5315_DSLBASE + 0x0050)  /* error  */
-#define AR5315_AHB_ERR1         (AR5315_DSLBASE + 0x0054)  /* haddr  */
-#define AR5315_AHB_ERR2         (AR5315_DSLBASE + 0x0058)  /* hwdata */
-#define AR5315_AHB_ERR3         (AR5315_DSLBASE + 0x005c)  /* hrdata */
-#define AR5315_AHB_ERR4         (AR5315_DSLBASE + 0x0060)  /* status */
-
-#define AHB_ERROR_DET               1   /* AHB Error has been detected,          */
-                                        /* write 1 to clear all bits in ERR0     */
-#define AHB_ERROR_OVR               2   /* AHB Error overflow has been detected  */
-#define AHB_ERROR_WDT               4   /* AHB Error due to wdt instead of hresp */
-
-#define PROCERR_HMAST               0x0000000f
-#define PROCERR_HMAST_DFLT          0
-#define PROCERR_HMAST_WMAC          1
-#define PROCERR_HMAST_ENET          2
-#define PROCERR_HMAST_PCIENDPT      3
-#define PROCERR_HMAST_LOCAL         4
-#define PROCERR_HMAST_CPU           5
-#define PROCERR_HMAST_PCITGT        6
-
-#define PROCERR_HMAST_S             0
-#define PROCERR_HWRITE              0x00000010
-#define PROCERR_HSIZE               0x00000060
-#define PROCERR_HSIZE_S             5
-#define PROCERR_HTRANS              0x00000180
-#define PROCERR_HTRANS_S            7
-#define PROCERR_HBURST              0x00000e00
-#define PROCERR_HBURST_S            9
-
-
-
-/*
- * Clock Control
- */
-#define AR5315_PLLC_CTL         (AR5315_DSLBASE + 0x0064)
-#define AR5315_PLLV_CTL         (AR5315_DSLBASE + 0x0068)
-#define AR5315_CPUCLK           (AR5315_DSLBASE + 0x006c)
-#define AR5315_AMBACLK          (AR5315_DSLBASE + 0x0070)
-#define AR5315_SYNCCLK          (AR5315_DSLBASE + 0x0074)
-#define AR5315_DSL_SLEEP_CTL    (AR5315_DSLBASE + 0x0080)
-#define AR5315_DSL_SLEEP_DUR    (AR5315_DSLBASE + 0x0084)
-
-/* PLLc Control fields */
-#define PLLC_REF_DIV_M              0x00000003
-#define PLLC_REF_DIV_S              0
-#define PLLC_FDBACK_DIV_M           0x0000007C
-#define PLLC_FDBACK_DIV_S           2
-#define PLLC_ADD_FDBACK_DIV_M       0x00000080
-#define PLLC_ADD_FDBACK_DIV_S       7
-#define PLLC_CLKC_DIV_M             0x0001c000
-#define PLLC_CLKC_DIV_S             14
-#define PLLC_CLKM_DIV_M             0x00700000
-#define PLLC_CLKM_DIV_S             20
-
-/* CPU CLK Control fields */
-#define CPUCLK_CLK_SEL_M            0x00000003
-#define CPUCLK_CLK_SEL_S            0
-#define CPUCLK_CLK_DIV_M            0x0000000c
-#define CPUCLK_CLK_DIV_S            2
-
-/* AMBA CLK Control fields */
-#define AMBACLK_CLK_SEL_M           0x00000003
-#define AMBACLK_CLK_SEL_S           0
-#define AMBACLK_CLK_DIV_M           0x0000000c
-#define AMBACLK_CLK_DIV_S           2
-
-#if defined(COBRA_EMUL)
-#define AR5315_AMBA_CLOCK_RATE  20000000
-#define AR5315_CPU_CLOCK_RATE   40000000
-#else
-#if defined(DEFAULT_PLL)
-#define AR5315_AMBA_CLOCK_RATE  40000000
-#define AR5315_CPU_CLOCK_RATE   40000000
-#else
-#define AR5315_AMBA_CLOCK_RATE  92000000
-#define AR5315_CPU_CLOCK_RATE   184000000
-#endif /* ! DEFAULT_PLL */
-#endif /* ! COBRA_EMUL */
-
-#define AR5315_UART_CLOCK_RATE  AR5315_AMBA_CLOCK_RATE
-#define AR5315_SDRAM_CLOCK_RATE AR5315_AMBA_CLOCK_RATE
-
-/*
- * The UART computes baud rate as:
- *   baud = clock / (16 * divisor)
- * where divisor is specified as a High Byte (DLM) and a Low Byte (DLL).
- */
-#define DESIRED_BAUD_RATE           38400
-
-
-#define CLOCKCTL_UART0  0x0010  /* enable UART0 external clock */
-
-
- /*
- * Applicable "PCICFG" bits for WLAN(s).  Assoc status and LED mode.
- */
-#define ASSOC_STATUS_M              0x00000003
-#define ASSOC_STATUS_NONE           0
-#define ASSOC_STATUS_PENDING        1
-#define ASSOC_STATUS_ASSOCIATED     2
-#define LED_MODE_M                  0x0000001c
-#define LED_BLINK_THRESHOLD_M       0x000000e0
-#define LED_SLOW_BLINK_MODE         0x00000100
-
-/*
- * GPIO
- */
-
-#define AR5315_GPIO_DI          (AR5315_DSLBASE + 0x0088)
-#define AR5315_GPIO_DO          (AR5315_DSLBASE + 0x0090)
-#define AR5315_GPIO_CR          (AR5315_DSLBASE + 0x0098)
-#define AR5315_GPIO_INT         (AR5315_DSLBASE + 0x00a0)
-
-#define AR5315_GPIO_CR_M(x)                (1 << (x))                  /* mask for i/o */
-#define AR5315_GPIO_CR_O(x)                (1 << (x))                  /* output */
-#define AR5315_GPIO_CR_I(x)                (0)                         /* input */
-
-#define AR5315_GPIO_INT_S(x)               (x)                         /* interrupt enable */
-#define AR5315_GPIO_INT_M                  (0x3F)                      /* mask for int */
-#define AR5315_GPIO_INT_LVL(x)             ((x) << 6)                  /* interrupt level */
-#define AR5315_GPIO_INT_LVL_M              ((0x3) << 6)                /* mask for int level */
-
-#define AR5315_GPIO_INT_MAX_Y				1   /* Maximum value of Y for AR5313_GPIO_INT_* macros */
-#define AR5315_GPIO_INT_LVL_OFF				0   /* Triggerring off */
-#define AR5315_GPIO_INT_LVL_LOW				1   /* Low Level Triggered */
-#define AR5315_GPIO_INT_LVL_HIGH			2   /* High Level Triggered */
-#define AR5315_GPIO_INT_LVL_EDGE			3   /* Edge Triggered */
-
-#define AR5315_RESET_GPIO       5
-#define AR5315_NUM_GPIO         22
-
-
-/*
- *  PCI Clock Control
- */
-
-#define AR5315_PCICLK           (AR5315_DSLBASE + 0x00a4)
-
-#define AR5315_PCICLK_INPUT_M              0x3
-#define AR5315_PCICLK_INPUT_S              0
-
-#define AR5315_PCICLK_PLLC_CLKM            0
-#define AR5315_PCICLK_PLLC_CLKM1           1
-#define AR5315_PCICLK_PLLC_CLKC            2
-#define AR5315_PCICLK_REF_CLK              3
-
-#define AR5315_PCICLK_DIV_M                0xc
-#define AR5315_PCICLK_DIV_S                2
-
-#define AR5315_PCICLK_IN_FREQ              0
-#define AR5315_PCICLK_IN_FREQ_DIV_6        1
-#define AR5315_PCICLK_IN_FREQ_DIV_8        2
-#define AR5315_PCICLK_IN_FREQ_DIV_10       3
-
-/*
- * Observation Control Register
- */
-#define AR5315_OCR              (AR5315_DSLBASE + 0x00b0)
-#define OCR_GPIO0_IRIN              0x0040
-#define OCR_GPIO1_IROUT             0x0080
-#define OCR_GPIO3_RXCLR             0x0200
-
-/*
- *  General Clock Control
- */
-
-#define AR5315_MISCCLK          (AR5315_DSLBASE + 0x00b4)
-#define MISCCLK_PLLBYPASS_EN        0x00000001
-#define MISCCLK_PROCREFCLK          0x00000002
-
-/*
- * SDRAM Controller
- *   - No read or write buffers are included.
- */
-#define AR5315_MEM_CFG          (AR5315_SDRAMCTL + 0x00)
-#define AR5315_MEM_CTRL         (AR5315_SDRAMCTL + 0x0c)
-#define AR5315_MEM_REF          (AR5315_SDRAMCTL + 0x10)
-
-#define SDRAM_DATA_WIDTH_M          0x00006000
-#define SDRAM_DATA_WIDTH_S          13
-
-#define SDRAM_COL_WIDTH_M           0x00001E00
-#define SDRAM_COL_WIDTH_S           9
-
-#define SDRAM_ROW_WIDTH_M           0x000001E0
-#define SDRAM_ROW_WIDTH_S           5
-
-#define SDRAM_BANKADDR_BITS_M       0x00000018
-#define SDRAM_BANKADDR_BITS_S       3
-
-/*
- * SPI Flash Interface Registers
- */
-
-#define AR5315_SPI_CTL      (AR5315_SPI + 0x00)
-#define AR5315_SPI_OPCODE   (AR5315_SPI + 0x04)
-#define AR5315_SPI_DATA     (AR5315_SPI + 0x08)
-
-#define SPI_CTL_START           0x00000100
-#define SPI_CTL_BUSY            0x00010000
-#define SPI_CTL_TXCNT_MASK      0x0000000f
-#define SPI_CTL_RXCNT_MASK      0x000000f0
-#define SPI_CTL_TX_RX_CNT_MASK  0x000000ff
-#define SPI_CTL_SIZE_MASK       0x00060000
-
-#define SPI_CTL_CLK_SEL_MASK    0x03000000
-#define SPI_OPCODE_MASK         0x000000ff
-
-/*
- * PCI-MAC Configuration registers
- */
-#define PCI_MAC_RC              (AR5315_PCI + 0x4000)
-#define PCI_MAC_SCR             (AR5315_PCI + 0x4004)
-#define PCI_MAC_INTPEND         (AR5315_PCI + 0x4008)
-#define PCI_MAC_SFR             (AR5315_PCI + 0x400C)
-#define PCI_MAC_PCICFG          (AR5315_PCI + 0x4010)
-#define PCI_MAC_SREV            (AR5315_PCI + 0x4020)
-
-#define PCI_MAC_RC_MAC          0x00000001
-#define PCI_MAC_RC_BB           0x00000002
-
-#define PCI_MAC_SCR_SLMODE_M    0x00030000
-#define PCI_MAC_SCR_SLMODE_S    16
-#define PCI_MAC_SCR_SLM_FWAKE   0
-#define PCI_MAC_SCR_SLM_FSLEEP  1
-#define PCI_MAC_SCR_SLM_NORMAL  2
-
-#define PCI_MAC_SFR_SLEEP       0x00000001
-
-#define PCI_MAC_PCICFG_SPWR_DN  0x00010000
-
-
-/*
- * PCI Bus Interface Registers
- */
-#define AR5315_PCI_1MS_REG      (AR5315_PCI + 0x0008)
-#define AR5315_PCI_1MS_MASK     0x3FFFF         /* # of AHB clk cycles in 1ms */
-
-#define AR5315_PCI_MISC_CONFIG  (AR5315_PCI + 0x000c)
-#define AR5315_PCIMISC_TXD_EN   0x00000001      /* Enable TXD for fragments */
-#define AR5315_PCIMISC_CFG_SEL  0x00000002      /* mem or config cycles */
-#define AR5315_PCIMISC_GIG_MASK 0x0000000C      /* bits 31-30 for pci req */
-#define AR5315_PCIMISC_RST_MODE 0x00000030
-#define AR5315_PCIRST_INPUT     0x00000000      /* 4:5=0 rst is input */
-#define AR5315_PCIRST_LOW       0x00000010      /* 4:5=1 rst to GND */
-#define AR5315_PCIRST_HIGH      0x00000020      /* 4:5=2 rst to VDD */
-#define AR5315_PCIGRANT_EN      0x00000000      /* 6:7=0 early grant en */
-#define AR5315_PCIGRANT_FRAME   0x00000040      /* 6:7=1 grant waits 4 frame */
-#define AR5315_PCIGRANT_IDLE    0x00000080      /* 6:7=2 grant waits 4 idle */
-#define AR5315_PCIGRANT_GAP     0x00000000      /* 6:7=2 grant waits 4 idle */
-#define AR5315_PCICACHE_DIS     0x00001000      /* PCI external access cache disable */
-
-#define AR5315_PCI_OUT_TSTAMP   (AR5315_PCI + 0x0010)
-
-#define AR5315_PCI_UNCACHE_CFG  (AR5315_PCI + 0x0014)
-
-#define AR5315_PCI_IN_EN        (AR5315_PCI + 0x0100)
-#define AR5315_PCI_IN_EN0       0x01            /* Enable chain 0 */
-#define AR5315_PCI_IN_EN1       0x02            /* Enable chain 1 */
-#define AR5315_PCI_IN_EN2       0x04            /* Enable chain 2 */
-#define AR5315_PCI_IN_EN3       0x08            /* Enable chain 3 */
-
-#define AR5315_PCI_IN_DIS       (AR5315_PCI + 0x0104)
-#define AR5315_PCI_IN_DIS0      0x01            /* Disable chain 0 */
-#define AR5315_PCI_IN_DIS1      0x02            /* Disable chain 1 */
-#define AR5315_PCI_IN_DIS2      0x04            /* Disable chain 2 */
-#define AR5315_PCI_IN_DIS3      0x08            /* Disable chain 3 */
-
-#define AR5315_PCI_IN_PTR       (AR5315_PCI + 0x0200)
-
-#define AR5315_PCI_OUT_EN       (AR5315_PCI + 0x0400)
-#define AR5315_PCI_OUT_EN0      0x01            /* Enable chain 0 */
-
-#define AR5315_PCI_OUT_DIS      (AR5315_PCI + 0x0404)
-#define AR5315_PCI_OUT_DIS0     0x01            /* Disable chain 0 */
-
-#define AR5315_PCI_OUT_PTR      (AR5315_PCI + 0x0408)
-
-#define AR5315_PCI_INT_STATUS   (AR5315_PCI + 0x0500)   /* write one to clr */
-#define AR5315_PCI_TXINT        0x00000001      /* Desc In Completed */
-#define AR5315_PCI_TXOK         0x00000002      /* Desc In OK */
-#define AR5315_PCI_TXERR        0x00000004      /* Desc In ERR */
-#define AR5315_PCI_TXEOL        0x00000008      /* Desc In End-of-List */
-#define AR5315_PCI_RXINT        0x00000010      /* Desc Out Completed */
-#define AR5315_PCI_RXOK         0x00000020      /* Desc Out OK */
-#define AR5315_PCI_RXERR        0x00000040      /* Desc Out ERR */
-#define AR5315_PCI_RXEOL        0x00000080      /* Desc Out EOL */
-#define AR5315_PCI_TXOOD        0x00000200      /* Desc In Out-of-Desc */
-#define AR5315_PCI_MASK         0x0000FFFF      /* Desc Mask */
-#define AR5315_PCI_EXT_INT      0x02000000
-#define AR5315_PCI_ABORT_INT    0x04000000
-
-#define AR5315_PCI_INT_MASK     (AR5315_PCI + 0x0504)   /* same as INT_STATUS */
-
-#define AR5315_PCI_INTEN_REG    (AR5315_PCI + 0x0508)
-#define AR5315_PCI_INT_DISABLE  0x00            /* disable pci interrupts */
-#define AR5315_PCI_INT_ENABLE   0x01            /* enable pci interrupts */
-
-#define AR5315_PCI_HOST_IN_EN   (AR5315_PCI + 0x0800)
-#define AR5315_PCI_HOST_IN_DIS  (AR5315_PCI + 0x0804)
-#define AR5315_PCI_HOST_IN_PTR  (AR5315_PCI + 0x0810)
-#define AR5315_PCI_HOST_OUT_EN  (AR5315_PCI + 0x0900)
-#define AR5315_PCI_HOST_OUT_DIS (AR5315_PCI + 0x0904)
-#define AR5315_PCI_HOST_OUT_PTR (AR5315_PCI + 0x0908)
-
-
-/*
- * Local Bus Interface Registers
- */
-#define AR5315_LB_CONFIG        (AR5315_LOCAL + 0x0000)
-#define AR5315_LBCONF_OE        0x00000001      /* =1 OE is low-true */
-#define AR5315_LBCONF_CS0       0x00000002      /* =1 first CS is low-true */
-#define AR5315_LBCONF_CS1       0x00000004      /* =1 2nd CS is low-true */
-#define AR5315_LBCONF_RDY       0x00000008      /* =1 RDY is low-true */
-#define AR5315_LBCONF_WE        0x00000010      /* =1 Write En is low-true */
-#define AR5315_LBCONF_WAIT      0x00000020      /* =1 WAIT is low-true */
-#define AR5315_LBCONF_ADS       0x00000040      /* =1 Adr Strobe is low-true */
-#define AR5315_LBCONF_MOT       0x00000080      /* =0 Intel, =1 Motorola */
-#define AR5315_LBCONF_8CS       0x00000100      /* =1 8 bits CS, 0= 16bits */
-#define AR5315_LBCONF_8DS       0x00000200      /* =1 8 bits Data S, 0=16bits */
-#define AR5315_LBCONF_ADS_EN    0x00000400      /* =1 Enable ADS */
-#define AR5315_LBCONF_ADR_OE    0x00000800      /* =1 Adr cap on OE, WE or DS */
-#define AR5315_LBCONF_ADDT_MUX  0x00001000      /* =1 Adr and Data share bus */
-#define AR5315_LBCONF_DATA_OE   0x00002000      /* =1 Data cap on OE, WE, DS */
-#define AR5315_LBCONF_16DATA    0x00004000      /* =1 Data is 16 bits wide */
-#define AR5315_LBCONF_SWAPDT    0x00008000      /* =1 Byte swap data */
-#define AR5315_LBCONF_SYNC      0x00010000      /* =1 Bus synchronous to clk */
-#define AR5315_LBCONF_INT       0x00020000      /* =1 Intr is low true */
-#define AR5315_LBCONF_INT_CTR0  0x00000000      /* GND high-Z, Vdd is high-Z */
-#define AR5315_LBCONF_INT_CTR1  0x00040000      /* GND drive, Vdd is high-Z */
-#define AR5315_LBCONF_INT_CTR2  0x00080000      /* GND high-Z, Vdd drive */
-#define AR5315_LBCONF_INT_CTR3  0x000C0000      /* GND drive, Vdd drive */
-#define AR5315_LBCONF_RDY_WAIT  0x00100000      /* =1 RDY is negative of WAIT */
-#define AR5315_LBCONF_INT_PULSE 0x00200000      /* =1 Interrupt is a pulse */
-#define AR5315_LBCONF_ENABLE    0x00400000      /* =1 Falcon respond to LB */
-
-#define AR5315_LB_CLKSEL        (AR5315_LOCAL + 0x0004)
-#define AR5315_LBCLK_EXT        0x0001          /* use external clk for lb */
-
-#define AR5315_LB_1MS           (AR5315_LOCAL + 0x0008)
-#define AR5315_LB1MS_MASK       0x3FFFF         /* # of AHB clk cycles in 1ms */
-
-#define AR5315_LB_MISCCFG       (AR5315_LOCAL + 0x000C)
-#define AR5315_LBM_TXD_EN       0x00000001      /* Enable TXD for fragments */
-#define AR5315_LBM_RX_INTEN     0x00000002      /* Enable LB ints on RX ready */
-#define AR5315_LBM_MBOXWR_INTEN 0x00000004      /* Enable LB ints on mbox wr */
-#define AR5315_LBM_MBOXRD_INTEN 0x00000008      /* Enable LB ints on mbox rd */
-#define AR5315_LMB_DESCSWAP_EN  0x00000010      /* Byte swap desc enable */
-#define AR5315_LBM_TIMEOUT_MASK 0x00FFFF80
-#define AR5315_LBM_TIMEOUT_SHFT 7
-#define AR5315_LBM_PORTMUX      0x07000000
-
-
-#define AR5315_LB_RXTSOFF       (AR5315_LOCAL + 0x0010)
-
-#define AR5315_LB_TX_CHAIN_EN   (AR5315_LOCAL + 0x0100)
-#define AR5315_LB_TXEN_0        0x01
-#define AR5315_LB_TXEN_1        0x02
-#define AR5315_LB_TXEN_2        0x04
-#define AR5315_LB_TXEN_3        0x08
-
-#define AR5315_LB_TX_CHAIN_DIS  (AR5315_LOCAL + 0x0104)
-#define AR5315_LB_TX_DESC_PTR   (AR5315_LOCAL + 0x0200)
-
-#define AR5315_LB_RX_CHAIN_EN   (AR5315_LOCAL + 0x0400)
-#define AR5315_LB_RXEN          0x01
-
-#define AR5315_LB_RX_CHAIN_DIS  (AR5315_LOCAL + 0x0404)
-#define AR5315_LB_RX_DESC_PTR   (AR5315_LOCAL + 0x0408)
-
-#define AR5315_LB_INT_STATUS    (AR5315_LOCAL + 0x0500)
-#define AR5315_INT_TX_DESC      0x0001
-#define AR5315_INT_TX_OK        0x0002
-#define AR5315_INT_TX_ERR       0x0004
-#define AR5315_INT_TX_EOF       0x0008
-#define AR5315_INT_RX_DESC      0x0010
-#define AR5315_INT_RX_OK        0x0020
-#define AR5315_INT_RX_ERR       0x0040
-#define AR5315_INT_RX_EOF       0x0080
-#define AR5315_INT_TX_TRUNC     0x0100
-#define AR5315_INT_TX_STARVE    0x0200
-#define AR5315_INT_LB_TIMEOUT   0x0400
-#define AR5315_INT_LB_ERR       0x0800
-#define AR5315_INT_MBOX_WR      0x1000
-#define AR5315_INT_MBOX_RD      0x2000
-
-/* Bit definitions for INT MASK are the same as INT_STATUS */
-#define AR5315_LB_INT_MASK      (AR5315_LOCAL + 0x0504)
-
-#define AR5315_LB_INT_EN        (AR5315_LOCAL + 0x0508)
-#define AR5315_LB_MBOX          (AR5315_LOCAL + 0x0600)
-
-
-
-/*
- * IR Interface Registers
- */
-#define AR5315_IR_PKTDATA                   (AR5315_IR + 0x0000)
-
-#define AR5315_IR_PKTLEN                    (AR5315_IR + 0x07fc) /* 0 - 63 */
-
-#define AR5315_IR_CONTROL                   (AR5315_IR + 0x0800)
-#define AR5315_IRCTL_TX                     0x00000000  /* use as tranmitter */
-#define AR5315_IRCTL_RX                     0x00000001  /* use as receiver   */
-#define AR5315_IRCTL_SAMPLECLK_MASK         0x00003ffe  /* Sample clk divisor mask */
-#define AR5315_IRCTL_SAMPLECLK_SHFT                  1
-#define AR5315_IRCTL_OUTPUTCLK_MASK         0x03ffc000  /* Output clk divisor mask */
-#define AR5315_IRCTL_OUTPUTCLK_SHFT                 14
-
-#define AR5315_IR_STATUS                    (AR5315_IR + 0x0804)
-#define AR5315_IRSTS_RX                     0x00000001  /* receive in progress */
-#define AR5315_IRSTS_TX                     0x00000002  /* transmit in progress */
-
-#define AR5315_IR_CONFIG                    (AR5315_IR + 0x0808)
-#define AR5315_IRCFG_INVIN                  0x00000001  /* invert input polarity */
-#define AR5315_IRCFG_INVOUT                 0x00000002  /* invert output polarity */
-#define AR5315_IRCFG_SEQ_START_WIN_SEL      0x00000004  /* 1 => 28, 0 => 7 */
-#define AR5315_IRCFG_SEQ_START_THRESH       0x000000f0  /*  */
-#define AR5315_IRCFG_SEQ_END_UNIT_SEL       0x00000100  /*  */
-#define AR5315_IRCFG_SEQ_END_UNIT_THRESH    0x00007e00  /*  */
-#define AR5315_IRCFG_SEQ_END_WIN_SEL        0x00008000  /*  */
-#define AR5315_IRCFG_SEQ_END_WIN_THRESH     0x001f0000  /*  */
-#define AR5315_IRCFG_NUM_BACKOFF_WORDS      0x01e00000  /*  */
-
-/*
- * PCI memory constants: Memory area 1 and 2 are the same size -
- * (twice the PCI_TLB_PAGE_SIZE). The definition of
- * CPU_TO_PCI_MEM_SIZE is coupled with the TLB setup routine
- * sysLib.c/sysTlbInit(), in that it assumes that 2 pages of size
- * PCI_TLB_PAGE_SIZE are set up in the TLB for each PCI memory space.
- */
-
-#define CPU_TO_PCI_MEM_BASE1    0xE0000000
-#define CPU_TO_PCI_MEM_SIZE1    (2*PCI_TLB_PAGE_SIZE)
-
-
-/* TLB attributes for PCI transactions */
-
-#define PCI_MMU_PAGEMASK        0x00003FFF
-#define MMU_PAGE_UNCACHED       0x00000010
-#define MMU_PAGE_DIRTY          0x00000004
-#define MMU_PAGE_VALID          0x00000002
-#define MMU_PAGE_GLOBAL         0x00000001
-#define PCI_MMU_PAGEATTRIB      (MMU_PAGE_UNCACHED|MMU_PAGE_DIRTY|\
-                                 MMU_PAGE_VALID|MMU_PAGE_GLOBAL)
-#define PCI_MEMORY_SPACE1_VIRT  0xE0000000      /* Used for non-prefet  mem   */
-#define PCI_MEMORY_SPACE1_PHYS  0x80000000
-#define PCI_TLB_PAGE_SIZE       0x01000000
-#define TLB_HI_MASK             0xFFFFE000
-#define TLB_LO_MASK             0x3FFFFFFF
-#define PAGEMASK_SHIFT          11
-#define TLB_LO_SHIFT            6
-
-#define PCI_MAX_LATENCY         0xFFF           /* Max PCI latency            */
-
-#define HOST_PCI_DEV_ID         3
-#define HOST_PCI_MBAR0          0x10000000
-#define HOST_PCI_MBAR1          0x20000000
-#define HOST_PCI_MBAR2          0x30000000
-
-#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
-#define PCI_DEVICE_MEM_SPACE    0x800000
-
-#endif
-
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x.h
deleted file mode 100644
index 8148b76fba..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x.h
+++ /dev/null
@@ -1,149 +0,0 @@
-#ifndef __AR531X_H
-#define __AR531X_H
-
-#include <linux/version.h>
-#include <asm/cpu-info.h>
-#include <ar531x_platform.h>
-#include <ar5312/ar5312.h>
-#include <ar5315/ar5315.h>
-
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24))
-extern void (*board_time_init)(void);
-#endif
-
-/*
- * Atheros CPUs before the AR2315 are using MIPS 4Kc core, later designs are
- * using MIPS 4KEc R2 core. This makes it easy to determine the board at runtime.
- */
-#ifdef CONFIG_ATHEROS_AR5312
-#define DO_AR5312(...) \
-	if (current_cpu_data.cputype != CPU_4KEC) { \
-		__VA_ARGS__ \
-	}
-#else
-#define DO_AR5312(...)
-#endif
-#ifdef CONFIG_ATHEROS_AR5315
-#define DO_AR5315(...) \
-	if (current_cpu_data.cputype == CPU_4KEC) { \
-		__VA_ARGS__ \
-	}
-#else
-#define DO_AR5315(...)
-#endif
-
-#define AR531X_MISC_IRQ_BASE		0x20
-#define AR531X_GPIO_IRQ_BASE		0x30
-
-/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
-#define AR531X_IRQ_NONE		MIPS_CPU_IRQ_BASE+0
-#define AR531X_IRQ_CPU_CLOCK	MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
-
-/* Miscellaneous interrupts, which share IP6 */
-#define AR531X_MISC_IRQ_NONE		AR531X_MISC_IRQ_BASE+0
-#define AR531X_MISC_IRQ_TIMER		AR531X_MISC_IRQ_BASE+1
-#define AR531X_MISC_IRQ_AHB_PROC	AR531X_MISC_IRQ_BASE+2
-#define AR531X_MISC_IRQ_AHB_DMA		AR531X_MISC_IRQ_BASE+3
-#define AR531X_MISC_IRQ_GPIO		AR531X_MISC_IRQ_BASE+4
-#define AR531X_MISC_IRQ_UART0		AR531X_MISC_IRQ_BASE+5
-#define AR531X_MISC_IRQ_UART0_DMA	AR531X_MISC_IRQ_BASE+6
-#define AR531X_MISC_IRQ_WATCHDOG	AR531X_MISC_IRQ_BASE+7
-#define AR531X_MISC_IRQ_LOCAL		AR531X_MISC_IRQ_BASE+8
-#define AR531X_MISC_IRQ_SPI 		AR531X_MISC_IRQ_BASE+9
-#define AR531X_MISC_IRQ_COUNT		10
-
-/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
-#define AR531X_GPIO_IRQ_NONE            AR531X_GPIO_IRQ_BASE+0
-#define AR531X_GPIO_IRQ(n)              AR531X_GPIO_IRQ_BASE+n
-#define AR531X_GPIO_IRQ_COUNT           22
-
-#define sysRegRead(phys)	\
-	(*(volatile u32 *)KSEG1ADDR(phys))
-
-#define sysRegWrite(phys, val)	\
-	((*(volatile u32 *)KSEG1ADDR(phys)) = (val))
-
-/*
- * This is board-specific data that is stored in a "fixed" location in flash.
- * It is shared across operating systems, so it should not be changed lightly.
- * The main reason we need it is in order to extract the ethernet MAC
- * address(es).
- */
-struct ar531x_boarddata {
-    u32 magic;                       /* board data is valid */
-#define AR531X_BD_MAGIC 0x35333131   /* "5311", for all 531x platforms */
-    u16 cksum;                       /* checksum (starting with BD_REV 2) */
-    u16 rev;                         /* revision of this struct */
-#define BD_REV  4
-    char   boardName[64];            /* Name of board */
-    u16 major;                       /* Board major number */
-    u16 minor;                       /* Board minor number */
-    u32 config;                      /* Board configuration */
-#define BD_ENET0        0x00000001   /* ENET0 is stuffed */
-#define BD_ENET1        0x00000002   /* ENET1 is stuffed */
-#define BD_UART1        0x00000004   /* UART1 is stuffed */
-#define BD_UART0        0x00000008   /* UART0 is stuffed (dma) */
-#define BD_RSTFACTORY   0x00000010   /* Reset factory defaults stuffed */
-#define BD_SYSLED       0x00000020   /* System LED stuffed */
-#define BD_EXTUARTCLK   0x00000040   /* External UART clock */
-#define BD_CPUFREQ      0x00000080   /* cpu freq is valid in nvram */
-#define BD_SYSFREQ      0x00000100   /* sys freq is set in nvram */
-#define BD_WLAN0        0x00000200   /* Enable WLAN0 */
-#define BD_MEMCAP       0x00000400   /* CAP SDRAM @ memCap for testing */
-#define BD_DISWATCHDOG  0x00000800   /* disable system watchdog */
-#define BD_WLAN1        0x00001000   /* Enable WLAN1 (ar5212) */
-#define BD_ISCASPER     0x00002000   /* FLAG for AR2312 */
-#define BD_WLAN0_2G_EN  0x00004000   /* FLAG for radio0_2G */
-#define BD_WLAN0_5G_EN  0x00008000   /* FLAG for radio0_2G */
-#define BD_WLAN1_2G_EN  0x00020000   /* FLAG for radio0_2G */
-#define BD_WLAN1_5G_EN  0x00040000   /* FLAG for radio0_2G */
-    u16 resetConfigGpio;             /* Reset factory GPIO pin */
-    u16 sysLedGpio;                  /* System LED GPIO pin */
-
-    u32 cpuFreq;                     /* CPU core frequency in Hz */
-    u32 sysFreq;                     /* System frequency in Hz */
-    u32 cntFreq;                     /* Calculated C0_COUNT frequency */
-
-    u8  wlan0Mac[6];
-    u8  enet0Mac[6];
-    u8  enet1Mac[6];
-
-    u16 pciId;                       /* Pseudo PCIID for common code */
-    u16 memCap;                      /* cap bank1 in MB */
-
-    /* version 3 */
-    u8  wlan1Mac[6];                 /* (ar5212) */
-};
-
-#define BOARD_CONFIG_BUFSZ		0x1000
-
-extern char *board_config, *radio_config;
-extern void serial_setup(unsigned long mapbase, unsigned int uartclk);
-extern int ar531x_find_config(char *flash_limit);
-
-extern void ar5312_prom_init(void);
-extern void ar5312_misc_intr_init(int irq_base);
-extern void ar5312_plat_setup(void);
-extern asmlinkage void ar5312_irq_dispatch(void);
-
-extern void ar5315_prom_init(void);
-extern void ar5315_misc_intr_init(int irq_base);
-extern void ar5315_plat_setup(void);
-extern asmlinkage void ar5315_irq_dispatch(void);
-extern void ar5315_pci_irq(int irq);
-static inline u32 sysRegMask(u32 phys, u32 mask, u32 value)
-{
-	u32 reg;
-
-	reg = sysRegRead(phys);
-	reg &= ~mask;
-	reg |= value & mask;
-	sysRegWrite(phys, reg);
-	reg = sysRegRead(phys); /* flush write to the hardware */
-
-	return reg;
-}
-
-#define AR531X_NUM_GPIO		8
-
-#endif
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x_platform.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x_platform.h
deleted file mode 100644
index bddcd59a0b..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x_platform.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __AR531X_PLATFORM_H
-#define __AR531X_PLATFORM_H
-
-/*
- * Board support data.  The driver is required to locate
- * and fill-in this information before passing a reference to
- * this structure as the HAL_BUS_TAG parameter supplied to
- * ath_hal_attach.
- */
-struct ar531x_config {
-	const char  *board;	/* board config data */
-	const char	*radio;			/* radio config data */
-	int		unit;			/* unit number [0, 1] */
-	u32		tag;			/* used as devid for now */
-};
-
-struct ar531x_eth {
-	int phy;
-	int mac;
-	u32 reset_base;
-	u32 reset_mac;
-	u32 reset_phy;
-	u32 phy_base;
-	char *board_config;
-	char *macaddr;
-};
-
-#endif /* __AR531X_PLATFORM_H */
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/cpu-feature-overrides.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/cpu-feature-overrides.h
deleted file mode 100644
index 97f904b5f2..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/cpu-feature-overrides.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- *  Atheros SoC specific CPU feature overrides
- *
- *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This file was derived from: include/asm-mips/cpu-features.h
- *	Copyright (C) 2003, 2004 Ralf Baechle
- *	Copyright (C) 2004 Maciej W. Rozycki
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
-
-/*
- * The ATHEROS SoCs have MIPS 4Kc/4KEc core.
- */
-#define cpu_has_tlb			1
-#define cpu_has_4kex			1
-#define cpu_has_3k_cache		0
-#define cpu_has_4k_cache		1
-#define cpu_has_tx39_cache		0
-#define cpu_has_sb1_cache		0
-#define cpu_has_fpu			0
-#define cpu_has_32fpr			0
-#define cpu_has_counter			1
-/* #define cpu_has_watch		? */
-/* #define cpu_has_divec		? */
-/* #define cpu_has_vce			? */
-/* #define cpu_has_cache_cdex_p		? */
-/* #define cpu_has_cache_cdex_s		? */
-/* #define cpu_has_prefetch		? */
-/* #define cpu_has_mcheck		? */
-#define cpu_has_ejtag			1
-
-#if !defined(CONFIG_ATHEROS_AR5312)
-#  define cpu_has_llsc			1
-#else
-/*
- * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the
- * ll/sc instructions.
- */
-#  define cpu_has_llsc			0
-#endif
-
-#define cpu_has_mips16			0
-#define cpu_has_mdmx			0
-#define cpu_has_mips3d			0
-#define cpu_has_smartmips		0
-
-/* #define cpu_has_vtag_icache		? */
-/* #define cpu_has_dc_aliases		? */
-/* #define cpu_has_ic_fills_f_dc	? */
-/* #define cpu_has_pindexed_dcache	? */
-
-/* #define cpu_icache_snoops_remote_store	? */
-
-#define cpu_has_mips32r1		1
-
-#if !defined(CONFIG_ATHEROS_AR5312)
-#  define cpu_has_mips32r2		1
-#endif
-
-#define cpu_has_mips64r1		0
-#define cpu_has_mips64r2		0
-
-#define cpu_has_dsp			0
-#define cpu_has_mipsmt			0
-
-/* #define cpu_has_nofpuex		? */
-#define cpu_has_64bits			0
-#define cpu_has_64bit_zero_reg		0
-#define cpu_has_64bit_gp_regs		0
-#define cpu_has_64bit_addresses		0
-
-/* #define cpu_has_inclusive_pcaches	? */
-
-/* #define cpu_dcache_line_size()	? */
-/* #define cpu_icache_line_size()	? */
-
-#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/dma-coherence.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/dma-coherence.h
deleted file mode 100644
index fe53556881..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/dma-coherence.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
- * Copyright (C) 2007  Felix Fietkau <nbd@openwrt.org>
- *
- */
-#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
-#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
-
-#define PCI_DMA_OFFSET	0x20000000
-
-struct device;
-
-static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
-{
-	return virt_to_phys(addr) + (dev != NULL ? PCI_DMA_OFFSET : 0);
-}
-
-static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
-{
-	return page_to_phys(page) + (dev != NULL ? PCI_DMA_OFFSET : 0);
-}
-
-static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
-{
-	return (dma_addr > PCI_DMA_OFFSET ? dma_addr - PCI_DMA_OFFSET : dma_addr);
-}
-
-static void plat_unmap_dma_mem(dma_addr_t dma_addr)
-{
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/gpio.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/gpio.h
deleted file mode 100644
index d09e59d2b4..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/gpio.h
+++ /dev/null
@@ -1,118 +0,0 @@
-#ifndef _ATHEROS_GPIO_H_
-#define _ATHEROS_GPIO_H_
-
-#include "ar531x.h"
-
-/* Common AR531X global variables */
-/* extern u32 ar531x_gpio_intr_Mask; */
-
-/* AR5312 exported routines */
-#ifdef CONFIG_ATHEROS_AR5312
-asmlinkage void ar5312_gpio_irq_dispatch(void);
-#endif
-
-/* AR5315 exported routines */
-#ifdef CONFIG_ATHEROS_AR5315
-asmlinkage void ar5315_gpio_irq_dispatch(void);
-#endif
-
-/*
- * Wrappers for the generic GPIO layer
- */
-
-/* Sets a gpio to input, or returns ENXIO for non-existent gpio */
-static inline int gpio_direction_input(unsigned gpio) {
-	DO_AR5312(	if (gpio > AR531X_NUM_GPIO) {			\
-				return -ENXIO;				\
-			} else {					\
-				sysRegWrite(AR531X_GPIO_CR,		\
-					sysRegRead(AR531X_GPIO_CR) |	\
-					AR531X_GPIO_CR_I(gpio) );	\
-				return 0;				\
-			}						\
-	)
-	DO_AR5315(	if (gpio > AR5315_NUM_GPIO) {			\
-				return -ENXIO;				\
-			} else {					\
-				sysRegWrite(AR5315_GPIO_CR,		\
-					( sysRegRead(AR5315_GPIO_CR) &	\
-					  ~(AR5315_GPIO_CR_M(gpio)) ) |	\
-					  AR5315_GPIO_CR_I(gpio) );	\
-				return 0;				\
-			}						\
-	)
-	return -ENXIO;
-}
-
-/* Sets a gpio to output with value, or returns ENXIO for non-existent gpio */
-static inline int gpio_direction_output(unsigned gpio, int value) {
-	DO_AR5312(	if (gpio > AR531X_NUM_GPIO) {			\
-				return -ENXIO;				\
-			} else {					\
-				sysRegWrite(AR531X_GPIO_DO,		\
-					( (sysRegRead(AR531X_GPIO_DO) &	\
-					  ~(1 << gpio) ) |		\
-					  ((value!=0) << gpio)) );	\
-				sysRegWrite(AR531X_GPIO_CR,		\
-					( sysRegRead(AR531X_GPIO_CR) &	\
-					  ~(AR531X_GPIO_CR_M(gpio)) )); \
-				return 0;				\
-			}						\
-	)
-	DO_AR5315(	if (gpio > AR5315_NUM_GPIO) {			\
-				return -ENXIO;				\
-			} else {					\
-				sysRegWrite(AR5315_GPIO_DO,		\
-					( (sysRegRead(AR5315_GPIO_DO) &	\
-					  ~(1 << gpio)) |		\
-					  ((value!=0) << gpio)) );	\
-				sysRegWrite(AR5315_GPIO_CR,		\
-					sysRegRead(AR5315_GPIO_CR) |	\
-					AR5315_GPIO_CR_O(gpio) );	\
-				return 0;				\
-			}						\
-	)
-	return -ENXIO;
-}
-
-/* Reads the gpio pin.  Unchecked function */
-static inline int gpio_get_value(unsigned gpio) {
-	DO_AR5312(return (sysRegRead(AR531X_GPIO_DI) & (1 << gpio));)
-	DO_AR5315(return (sysRegRead(AR5315_GPIO_DI) & (1 << gpio));)
-	return 0;
-}
-
-/* Writes to the gpio pin.  Unchecked function */
-static inline void gpio_set_value(unsigned gpio, int value) {
-	DO_AR5312(	sysRegWrite(AR531X_GPIO_DO,	\
-			( (sysRegRead(AR531X_GPIO_DO) &	\
-			  ~(1 << gpio)) |		\
-			  ((value!=0) << gpio)) );	\
-	)
-	DO_AR5315(	sysRegWrite(AR5315_GPIO_DO,	\
-			( (sysRegRead(AR5315_GPIO_DO) &	\
-			  ~(1 << gpio)) |		\
-			  ((value!=0) << gpio)) );	\
-	)
-}
-
-static inline int gpio_request(unsigned gpio, const char *label) {
-	return 0;
-}
-
-static inline void gpio_free(unsigned gpio) {
-}
-
-/* Returns IRQ to attach for gpio.  Unchecked function */
-static inline int gpio_to_irq(unsigned gpio) {
-	return AR531X_GPIO_IRQ(gpio);
-}
-
-/* Returns gpio for IRQ attached.  Unchecked function */
-static inline int irq_to_gpio(unsigned irq) {
-	return (irq - (AR531X_GPIO_IRQ(0)));
-}
-
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-#endif
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/reset.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/reset.h
deleted file mode 100644
index e9fa4c5b16..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/reset.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __AR531X_RESET_H
-#define __AR531X_RESET_H
-
-void ar531x_disable_reset_button(void);
-
-#endif /* __AR531X_RESET_H */
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/war.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/war.h
deleted file mode 100644
index 354c6e6fd1..0000000000
--- a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/war.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
- */
-#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H
-#define __ASM_MIPS_MACH_ATHEROS_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR	0
-#define R4600_V1_HIT_CACHEOP_WAR	0
-#define R4600_V2_HIT_CACHEOP_WAR	0
-#define R5432_CP0_INTERRUPT_WAR		0
-#define BCM1250_M3_WAR			0
-#define SIBYTE_1956_WAR			0
-#define MIPS4K_ICACHE_REFILL_WAR	0
-#define MIPS_CACHE_SYNC_WAR		0
-#define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
-#define ICACHE_REFILLS_WORKAROUND_WAR	0
-#define R10000_LLSC_WAR			0
-#define MIPS34K_MISSED_ITLB_WAR		0
-
-#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */
diff --git a/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.c b/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.c
deleted file mode 100644
index 92d4fff997..0000000000
--- a/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.c
+++ /dev/null
@@ -1,533 +0,0 @@
-
-/*
- * MTD driver for the SPI Flash Memory support.
- *
- * Copyright (c) 2005-2006 Atheros Communications Inc.
- * Copyright (C) 2006-2007 FON Technology, SL.
- * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2006-2007 Felix Fietkau <nbd@openwrt.org>
- *
- * This code is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-/*===========================================================================
-** !!!!  VERY IMPORTANT NOTICE !!!!  FLASH DATA STORED IN LITTLE ENDIAN FORMAT
-**
-** This module contains the Serial Flash access routines for the Atheros SOC.
-** The Atheros SOC integrates a SPI flash controller that is used to access
-** serial flash parts. The SPI flash controller executes in "Little Endian"
-** mode. THEREFORE, all WRITES and READS from the MIPS CPU must be
-** BYTESWAPPED! The SPI Flash controller hardware by default performs READ
-** ONLY byteswapping when accessed via the SPI Flash Alias memory region
-** (Physical Address 0x0800_0000 - 0x0fff_ffff). The data stored in the
-** flash sectors is stored in "Little Endian" format.
-**
-** The spiflash_write() routine performs byteswapping on all write
-** operations.
-**===========================================================================*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/version.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/squashfs_fs.h>
-#include <linux/root_dev.h>
-#include <linux/delay.h>
-#include <asm/delay.h>
-#include <asm/io.h>
-#include "spiflash.h"
-
-#ifndef __BIG_ENDIAN
-#error This driver currently only works with big endian CPU.
-#endif
-
-#define MAX_PARTS 32
-
-#define SPIFLASH "spiflash: "
-
-#define MIN(a,b)        ((a) < (b) ? (a) : (b))
-
-#define busy_wait(condition, wait) \
-	do { \
-		while (condition) { \
-			spin_unlock_bh(&spidata->mutex); \
-			if (wait > 1) \
-				msleep(wait); \
-			else if ((wait == 1) && need_resched()) \
-				schedule(); \
-			else \
-				udelay(1); \
-			spin_lock_bh(&spidata->mutex); \
-		} \
-	} while (0)
-
-
-static __u32 spiflash_regread32(int reg);
-static void spiflash_regwrite32(int reg, __u32 data);
-static __u32 spiflash_sendcmd (int op, u32 addr);
-
-int __init spiflash_init (void);
-void __exit spiflash_exit (void);
-static int spiflash_probe_chip (void);
-static int spiflash_erase (struct mtd_info *mtd,struct erase_info *instr);
-static int spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf);
-static int spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf);
-
-/* Flash configuration table */
-struct flashconfig {
-    __u32 byte_cnt;
-    __u32 sector_cnt;
-    __u32 sector_size;
-    __u32 cs_addrmask;
-} flashconfig_tbl[MAX_FLASH] =
-    {
-        { 0, 0, 0, 0},
-        { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE, 0x0},
-        { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE, 0x0},
-        { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE, 0x0},
-        { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE, 0x0},
-        { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE, 0x0}
-    };
-
-/* Mapping of generic opcodes to STM serial flash opcodes */
-#define SPI_WRITE_ENABLE    0
-#define SPI_WRITE_DISABLE   1
-#define SPI_RD_STATUS       2
-#define SPI_WR_STATUS       3
-#define SPI_RD_DATA         4
-#define SPI_FAST_RD_DATA    5
-#define SPI_PAGE_PROGRAM    6
-#define SPI_SECTOR_ERASE    7
-#define SPI_BULK_ERASE      8
-#define SPI_DEEP_PWRDOWN    9
-#define SPI_RD_SIG          10
-#define SPI_MAX_OPCODES     11
-
-struct opcodes {
-    __u16 code;
-    __s8 tx_cnt;
-    __s8 rx_cnt;
-} stm_opcodes[] = {
-        {STM_OP_WR_ENABLE, 1, 0},
-        {STM_OP_WR_DISABLE, 1, 0},
-        {STM_OP_RD_STATUS, 1, 1},
-        {STM_OP_WR_STATUS, 1, 0},
-        {STM_OP_RD_DATA, 4, 4},
-        {STM_OP_FAST_RD_DATA, 5, 0},
-        {STM_OP_PAGE_PGRM, 8, 0},
-        {STM_OP_SECTOR_ERASE, 4, 0},
-        {STM_OP_BULK_ERASE, 1, 0},
-        {STM_OP_DEEP_PWRDOWN, 1, 0},
-        {STM_OP_RD_SIG, 4, 1},
-};
-
-/* Driver private data structure */
-struct spiflash_data {
-	struct 	mtd_info       *mtd;
-	struct 	mtd_partition  *parsed_parts;     /* parsed partitions */
-	void 	*readaddr; /* memory mapped data for read  */
-	void 	*mmraddr;  /* memory mapped register space */
-	wait_queue_head_t wq;
-	spinlock_t mutex;
-	int state;
-};
-enum {
-	FL_READY,
-	FL_READING,
-	FL_ERASING,
-	FL_WRITING
-};
-
-static struct spiflash_data *spidata;
-
-extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
-
-/***************************************************************************************************/
-
-static __u32
-spiflash_regread32(int reg)
-{
-	volatile __u32 *data = (__u32 *)(spidata->mmraddr + reg);
-
-	return (*data);
-}
-
-static void
-spiflash_regwrite32(int reg, __u32 data)
-{
-	volatile __u32 *addr = (__u32 *)(spidata->mmraddr + reg);
-
-	*addr = data;
-	return;
-}
-
-
-static __u32
-spiflash_sendcmd (int op, u32 addr)
-{
-	 u32 reg;
-	 u32 mask;
-	struct opcodes *ptr_opcode;
-
-	ptr_opcode = &stm_opcodes[op];
-	busy_wait((reg = spiflash_regread32(SPI_FLASH_CTL)) & SPI_CTL_BUSY, 0);
-	spiflash_regwrite32(SPI_FLASH_OPCODE, ((u32) ptr_opcode->code) | (addr << 8));
-
-	reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt |
-        	(ptr_opcode->rx_cnt << 4) | SPI_CTL_START;
-
-	spiflash_regwrite32(SPI_FLASH_CTL, reg);
-	busy_wait(spiflash_regread32(SPI_FLASH_CTL) & SPI_CTL_BUSY, 0);
-
-	if (!ptr_opcode->rx_cnt)
-		return 0;
-
-	reg = (__u32) spiflash_regread32(SPI_FLASH_DATA);
-
-	switch (ptr_opcode->rx_cnt) {
-	case 1:
-			mask = 0x000000ff;
-			break;
-	case 2:
-			mask = 0x0000ffff;
-			break;
-	case 3:
-			mask = 0x00ffffff;
-			break;
-	default:
-			mask = 0xffffffff;
-			break;
-	}
-	reg &= mask;
-
-	return reg;
-}
-
-
-
-/* Probe SPI flash device
- * Function returns 0 for failure.
- * and flashconfig_tbl array index for success.
- */
-static int
-spiflash_probe_chip (void)
-{
-	__u32 sig;
-   	int flash_size;
-
-   	/* Read the signature on the flash device */
-	spin_lock_bh(&spidata->mutex);
-   	sig = spiflash_sendcmd(SPI_RD_SIG, 0);
-	spin_unlock_bh(&spidata->mutex);
-
-   	switch (sig) {
-   	case STM_8MBIT_SIGNATURE:
-            	flash_size = FLASH_1MB;
-        	break;
-        case STM_16MBIT_SIGNATURE:
-            	flash_size = FLASH_2MB;
-            	break;
-        case STM_32MBIT_SIGNATURE:
-            	flash_size = FLASH_4MB;
-            	break;
-        case STM_64MBIT_SIGNATURE:
-            	flash_size = FLASH_8MB;
-            	break;
-        case STM_128MBIT_SIGNATURE:
-            	flash_size = FLASH_16MB;
-            	break;
-        default:
-	    	printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n");
-            	return (0);
-   	}
-
-   	return (flash_size);
-}
-
-
-/* wait until the flash chip is ready and grab a lock */
-static int spiflash_wait_ready(int state)
-{
-	DECLARE_WAITQUEUE(wait, current);
-
-retry:
-	spin_lock_bh(&spidata->mutex);
-	if (spidata->state != FL_READY) {
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		add_wait_queue(&spidata->wq, &wait);
-		spin_unlock_bh(&spidata->mutex);
-		schedule();
-		remove_wait_queue(&spidata->wq, &wait);
-
-		if(signal_pending(current))
-			return 0;
-
-		goto retry;
-	}
-	spidata->state = state;
-
-	return 1;
-}
-
-static inline void spiflash_done(void)
-{
-	spidata->state = FL_READY;
-	spin_unlock_bh(&spidata->mutex);
-	wake_up(&spidata->wq);
-}
-
-static int
-spiflash_erase (struct mtd_info *mtd,struct erase_info *instr)
-{
-	struct opcodes *ptr_opcode;
-	u32 temp, reg;
-
-   	/* sanity checks */
-   	if (instr->addr + instr->len > mtd->size) return (-EINVAL);
-
-	if (!spiflash_wait_ready(FL_ERASING))
-		return -EINTR;
-
-	spiflash_sendcmd(SPI_WRITE_ENABLE, 0);
-	busy_wait((reg = spiflash_regread32(SPI_FLASH_CTL)) & SPI_CTL_BUSY, 0);
-	reg = spiflash_regread32(SPI_FLASH_CTL);
-
-	ptr_opcode = &stm_opcodes[SPI_SECTOR_ERASE];
-	temp = ((__u32)instr->addr << 8) | (__u32)(ptr_opcode->code);
-	spiflash_regwrite32(SPI_FLASH_OPCODE, temp);
-
-	reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt | SPI_CTL_START;
-	spiflash_regwrite32(SPI_FLASH_CTL, reg);
-
-	/* this will take some time */
-	spin_unlock_bh(&spidata->mutex);
-	msleep(800);
-	spin_lock_bh(&spidata->mutex);
-
-	busy_wait(spiflash_sendcmd(SPI_RD_STATUS, 0) & SPI_STATUS_WIP, 20);
-	spiflash_done();
-
-   	instr->state = MTD_ERASE_DONE;
-   	if (instr->callback) instr->callback (instr);
-
-   	return 0;
-}
-
-static int
-spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf)
-{
-	u8 *read_addr;
-
-   	/* sanity checks */
-   	if (!len) return (0);
-   	if (from + len > mtd->size) return (-EINVAL);
-
-   	/* we always read len bytes */
-   	*retlen = len;
-
-	if (!spiflash_wait_ready(FL_READING))
-		return -EINTR;
-	read_addr = (u8 *)(spidata->readaddr + from);
-	memcpy(buf, read_addr, len);
-	spiflash_done();
-
-   	return 0;
-}
-
-static int
-spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf)
-{
-	u32 opcode, bytes_left;
-
-   	*retlen = 0;
-
-   	/* sanity checks */
-   	if (!len) return (0);
-   	if (to + len > mtd->size) return (-EINVAL);
-
-	opcode = stm_opcodes[SPI_PAGE_PROGRAM].code;
-	bytes_left = len;
-
-	do {
-		u32 xact_len, reg, page_offset, spi_data = 0;
-
-		xact_len = MIN(bytes_left, sizeof(__u32));
-
-		/* 32-bit writes cannot span across a page boundary
-		 * (256 bytes). This types of writes require two page
-		 * program operations to handle it correctly. The STM part
-		 * will write the overflow data to the beginning of the
-		 * current page as opposed to the subsequent page.
-		 */
-		page_offset = (to & (STM_PAGE_SIZE - 1)) + xact_len;
-
-		if (page_offset > STM_PAGE_SIZE) {
-			xact_len -= (page_offset - STM_PAGE_SIZE);
-		}
-
-		if (!spiflash_wait_ready(FL_WRITING))
-			return -EINTR;
-
-		spiflash_sendcmd(SPI_WRITE_ENABLE, 0);
-		switch (xact_len) {
-			case 1:
-			 	spi_data = (u32) ((u8) *buf);
-				break;
-			case 2:
-				spi_data = (buf[1] << 8) | buf[0];
-				break;
-			case 3:
-				spi_data = (buf[2] << 16) | (buf[1] << 8) | buf[0];
-				break;
-			case 4:
-				spi_data = (buf[3] << 24) | (buf[2] << 16) |
-							(buf[1] << 8) | buf[0];
-				break;
-			default:
-				spi_data = 0;
-				break;
-		}
-
-		spiflash_regwrite32(SPI_FLASH_DATA, spi_data);
-		opcode = (opcode & SPI_OPCODE_MASK) | ((__u32)to << 8);
-		spiflash_regwrite32(SPI_FLASH_OPCODE, opcode);
-
-		reg = spiflash_regread32(SPI_FLASH_CTL);
-		reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | (xact_len + 4) | SPI_CTL_START;
-		spiflash_regwrite32(SPI_FLASH_CTL, reg);
-
-		/* give the chip some time before we start busy waiting */
-		spin_unlock_bh(&spidata->mutex);
-		schedule();
-		spin_lock_bh(&spidata->mutex);
-
-		busy_wait(spiflash_sendcmd(SPI_RD_STATUS, 0) & SPI_STATUS_WIP, 0);
-		spiflash_done();
-
-		bytes_left -= xact_len;
-		to += xact_len;
-		buf += xact_len;
-
-   		*retlen += xact_len;
-	} while (bytes_left != 0);
-
-   	return 0;
-}
-
-
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "MyLoader", NULL };
-#endif
-
-
-static int spiflash_probe(struct platform_device *pdev)
-{
-   	int result = -1;
-   	int index, num_parts;
-	struct mtd_info *mtd;
-
-	spidata->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
-	spin_lock_init(&spidata->mutex);
-	init_waitqueue_head(&spidata->wq);
-	spidata->state = FL_READY;
-
-	if (!spidata->mmraddr) {
-  		printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
-		kfree(spidata);
-		spidata = NULL;
-	}
-
-   	mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
-   	if (!mtd) {
-		kfree(spidata);
-		return -ENXIO;
-	}
-
-   	if (!(index = spiflash_probe_chip())) {
-    	printk (KERN_WARNING SPIFLASH "Found no serial flash device\n");
-		goto error;
-   	}
-
-	spidata->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
-	if (!spidata->readaddr) {
-		printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
-		goto error;
-	}
-
-   	mtd->name = "spiflash";
-   	mtd->type = MTD_NORFLASH;
-   	mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
-   	mtd->size = flashconfig_tbl[index].byte_cnt;
-   	mtd->erasesize = flashconfig_tbl[index].sector_size;
-	mtd->writesize = 1;
-   	mtd->numeraseregions = 0;
-   	mtd->eraseregions = NULL;
-   	mtd->erase = spiflash_erase;
-   	mtd->read = spiflash_read;
-   	mtd->write = spiflash_write;
-	mtd->owner = THIS_MODULE;
-
-   	/* parse redboot partitions */
-	num_parts = parse_mtd_partitions(mtd, part_probe_types, &spidata->parsed_parts, 0);
-	if (!num_parts)
-		goto error;
-
-	result = add_mtd_partitions(mtd, spidata->parsed_parts, num_parts);
-	spidata->mtd = mtd;
-
-   	return (result);
-
-error:
-	kfree(mtd);
-	kfree(spidata);
-	return -ENXIO;
-}
-
-static int spiflash_remove (struct platform_device *pdev)
-{
-	del_mtd_partitions (spidata->mtd);
-	kfree(spidata->mtd);
-	return 0;
-}
-
-struct platform_driver spiflash_driver = {
-	.driver.name = "spiflash",
-	.probe = spiflash_probe,
-	.remove = spiflash_remove,
-};
-
-int __init
-spiflash_init (void)
-{
-   	spidata = kmalloc(sizeof(struct spiflash_data), GFP_KERNEL);
-  	if (!spidata)
-		return (-ENXIO);
-
-	spin_lock_init(&spidata->mutex);
-	platform_driver_register(&spiflash_driver);
-
-	return 0;
-}
-
-void __exit
-spiflash_exit (void)
-{
-	kfree(spidata);
-}
-
-module_init (spiflash_init);
-module_exit (spiflash_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc");
-MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC");
-
diff --git a/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.h b/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.h
deleted file mode 100644
index 2553c6f50f..0000000000
--- a/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * SPI Flash Memory support header file.
- *
- * $Id: //depot/sw/releases/linuxsrc/src/kernels/mips-linux-2.4.25/drivers/mtd/devices/spiflash.h#3 $
- *
- *
- * Copyright (c) 2005, Atheros Communications Inc.
- * Copyright (C) 2006 FON Technology, SL.
- * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
- *
- * This code is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#define FLASH_1MB  1
-#define FLASH_2MB  2
-#define FLASH_4MB  3
-#define FLASH_8MB  4
-#define FLASH_16MB 5
-#define MAX_FLASH  6
-
-#define STM_PAGE_SIZE           256
-
-#define SFI_WRITE_BUFFER_SIZE   4
-#define SFI_FLASH_ADDR_MASK     0x00ffffff
-
-#define STM_8MBIT_SIGNATURE     0x13
-#define STM_M25P80_BYTE_COUNT   1048576
-#define STM_M25P80_SECTOR_COUNT 16
-#define STM_M25P80_SECTOR_SIZE  0x10000
-
-#define STM_16MBIT_SIGNATURE    0x14
-#define STM_M25P16_BYTE_COUNT   2097152
-#define STM_M25P16_SECTOR_COUNT 32
-#define STM_M25P16_SECTOR_SIZE  0x10000
-
-#define STM_32MBIT_SIGNATURE    0x15
-#define STM_M25P32_BYTE_COUNT   4194304
-#define STM_M25P32_SECTOR_COUNT 64
-#define STM_M25P32_SECTOR_SIZE  0x10000
-
-#define STM_64MBIT_SIGNATURE    0x16
-#define STM_M25P64_BYTE_COUNT   8388608
-#define STM_M25P64_SECTOR_COUNT 128
-#define STM_M25P64_SECTOR_SIZE  0x10000
-
-#define STM_128MBIT_SIGNATURE   0x17
-#define STM_M25P128_BYTE_COUNT   16777216
-#define STM_M25P128_SECTOR_COUNT 256
-#define STM_M25P128_SECTOR_SIZE  0x10000
-
-#define STM_1MB_BYTE_COUNT   STM_M25P80_BYTE_COUNT
-#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
-#define STM_1MB_SECTOR_SIZE  STM_M25P80_SECTOR_SIZE
-#define STM_2MB_BYTE_COUNT   STM_M25P16_BYTE_COUNT
-#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
-#define STM_2MB_SECTOR_SIZE  STM_M25P16_SECTOR_SIZE
-#define STM_4MB_BYTE_COUNT   STM_M25P32_BYTE_COUNT
-#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
-#define STM_4MB_SECTOR_SIZE  STM_M25P32_SECTOR_SIZE
-#define STM_8MB_BYTE_COUNT   STM_M25P64_BYTE_COUNT
-#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
-#define STM_8MB_SECTOR_SIZE  STM_M25P64_SECTOR_SIZE
-#define STM_16MB_BYTE_COUNT   STM_M25P128_BYTE_COUNT
-#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
-#define STM_16MB_SECTOR_SIZE  STM_M25P128_SECTOR_SIZE
-
-/*
- * ST Microelectronics Opcodes for Serial Flash
- */
-
-#define STM_OP_WR_ENABLE       0x06     /* Write Enable */
-#define STM_OP_WR_DISABLE      0x04     /* Write Disable */
-#define STM_OP_RD_STATUS       0x05     /* Read Status */
-#define STM_OP_WR_STATUS       0x01     /* Write Status */
-#define STM_OP_RD_DATA         0x03     /* Read Data */
-#define STM_OP_FAST_RD_DATA    0x0b     /* Fast Read Data */
-#define STM_OP_PAGE_PGRM       0x02     /* Page Program */
-#define STM_OP_SECTOR_ERASE    0xd8     /* Sector Erase */
-#define STM_OP_BULK_ERASE      0xc7     /* Bulk Erase */
-#define STM_OP_DEEP_PWRDOWN    0xb9     /* Deep Power-Down Mode */
-#define STM_OP_RD_SIG          0xab     /* Read Electronic Signature */
-
-#define STM_STATUS_WIP       0x01       /* Write-In-Progress */
-#define STM_STATUS_WEL       0x02       /* Write Enable Latch */
-#define STM_STATUS_BP0       0x04       /* Block Protect 0 */
-#define STM_STATUS_BP1       0x08       /* Block Protect 1 */
-#define STM_STATUS_BP2       0x10       /* Block Protect 2 */
-#define STM_STATUS_SRWD      0x80       /* Status Register Write Disable */
-
-/*
- * SPI Flash Interface Registers
- */
-#define AR531XPLUS_SPI_READ     0x08000000
-#define AR531XPLUS_SPI_MMR      0x11300000
-#define AR531XPLUS_SPI_MMR_SIZE 12
-
-#define AR531XPLUS_SPI_CTL      0x00
-#define AR531XPLUS_SPI_OPCODE   0x04
-#define AR531XPLUS_SPI_DATA     0x08
-
-#define SPI_FLASH_READ          AR531XPLUS_SPI_READ
-#define SPI_FLASH_MMR           AR531XPLUS_SPI_MMR
-#define SPI_FLASH_MMR_SIZE      AR531XPLUS_SPI_MMR_SIZE
-#define SPI_FLASH_CTL           AR531XPLUS_SPI_CTL
-#define SPI_FLASH_OPCODE        AR531XPLUS_SPI_OPCODE
-#define SPI_FLASH_DATA          AR531XPLUS_SPI_DATA
-
-#define SPI_CTL_START           0x00000100
-#define SPI_CTL_BUSY            0x00010000
-#define SPI_CTL_TXCNT_MASK      0x0000000f
-#define SPI_CTL_RXCNT_MASK      0x000000f0
-#define SPI_CTL_TX_RX_CNT_MASK  0x000000ff
-#define SPI_CTL_SIZE_MASK       0x00060000
-
-#define SPI_CTL_CLK_SEL_MASK    0x03000000
-#define SPI_OPCODE_MASK         0x000000ff
-
-#define SPI_STATUS_WIP		STM_STATUS_WIP
diff --git a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/Makefile b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/Makefile
deleted file mode 100644
index 9eb63e46b6..0000000000
--- a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the AR2313 ethernet driver
-#
-
-obj-$(CONFIG_AR2313)	+= ar2313.o
diff --git a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.c b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.c
deleted file mode 100644
index 727d190b37..0000000000
--- a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.c
+++ /dev/null
@@ -1,1409 +0,0 @@
-/*
- * ar2313.c: Linux driver for the Atheros AR231x Ethernet device.
- *
- * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
- * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2006-2007 Felix Fietkau <nbd@openwrt.org>
- *
- * Thanks to Atheros for providing hardware and documentation
- * enabling me to write this driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Additional credits:
- * 	This code is taken from John Taylor's Sibyte driver and then
- * 	modified for the AR2313.
- */
-
-#include <linux/autoconf.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <linux/highmem.h>
-#include <linux/sockios.h>
-#include <linux/pkt_sched.h>
-#include <linux/compile.h>
-#include <linux/mii.h>
-#include <linux/phy.h>
-#include <linux/ethtool.h>
-#include <linux/ctype.h>
-#include <linux/platform_device.h>
-
-#include <net/sock.h>
-#include <net/ip.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/byteorder.h>
-#include <asm/uaccess.h>
-#include <asm/bootinfo.h>
-
-#define AR2313_MTU                     1692
-#define AR2313_PRIOS                   1
-#define AR2313_QUEUES                  (2*AR2313_PRIOS)
-#define AR2313_DESCR_ENTRIES           64
-
-#undef INDEX_DEBUG
-#define DEBUG     0
-#define DEBUG_TX  0
-#define DEBUG_RX  0
-#define DEBUG_INT 0
-#define DEBUG_MC  0
-#define DEBUG_ERR 1
-
-#ifndef min
-#define min(a,b)	(((a)<(b))?(a):(b))
-#endif
-
-#ifndef SMP_CACHE_BYTES
-#define SMP_CACHE_BYTES	L1_CACHE_BYTES
-#endif
-
-#define AR2313_MBOX_SET_BIT  0x8
-
-#define BOARD_IDX_STATIC	0
-#define BOARD_IDX_OVERFLOW	-1
-
-#include "dma.h"
-#include "ar2313.h"
-
-/*
- * New interrupt handler strategy:
- *
- * An old interrupt handler worked using the traditional method of
- * replacing an skbuff with a new one when a packet arrives. However
- * the rx rings do not need to contain a static number of buffer
- * descriptors, thus it makes sense to move the memory allocation out
- * of the main interrupt handler and do it in a bottom half handler
- * and only allocate new buffers when the number of buffers in the
- * ring is below a certain threshold. In order to avoid starving the
- * NIC under heavy load it is however necessary to force allocation
- * when hitting a minimum threshold. The strategy for alloction is as
- * follows:
- *
- *     RX_LOW_BUF_THRES    - allocate buffers in the bottom half
- *     RX_PANIC_LOW_THRES  - we are very low on buffers, allocate
- *                           the buffers in the interrupt handler
- *     RX_RING_THRES       - maximum number of buffers in the rx ring
- *
- * One advantagous side effect of this allocation approach is that the
- * entire rx processing can be done without holding any spin lock
- * since the rx rings and registers are totally independent of the tx
- * ring and its registers.  This of course includes the kmalloc's of
- * new skb's. Thus start_xmit can run in parallel with rx processing
- * and the memory allocation on SMP systems.
- *
- * Note that running the skb reallocation in a bottom half opens up
- * another can of races which needs to be handled properly. In
- * particular it can happen that the interrupt handler tries to run
- * the reallocation while the bottom half is either running on another
- * CPU or was interrupted on the same CPU. To get around this the
- * driver uses bitops to prevent the reallocation routines from being
- * reentered.
- *
- * TX handling can also be done without holding any spin lock, wheee
- * this is fun! since tx_csm is only written to by the interrupt
- * handler.
- */
-
-/*
- * Threshold values for RX buffer allocation - the low water marks for
- * when to start refilling the rings are set to 75% of the ring
- * sizes. It seems to make sense to refill the rings entirely from the
- * intrrupt handler once it gets below the panic threshold, that way
- * we don't risk that the refilling is moved to another CPU when the
- * one running the interrupt handler just got the slab code hot in its
- * cache.
- */
-#define RX_RING_SIZE		AR2313_DESCR_ENTRIES
-#define RX_PANIC_THRES	        (RX_RING_SIZE/4)
-#define RX_LOW_THRES	        ((3*RX_RING_SIZE)/4)
-#define CRC_LEN                 4
-#define RX_OFFSET               2
-
-#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-#define VLAN_HDR                4
-#else
-#define VLAN_HDR                0
-#endif
-
-#define AR2313_BUFSIZE		(AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + RX_OFFSET)
-
-#ifdef MODULE
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>");
-MODULE_DESCRIPTION("AR2313 Ethernet driver");
-#endif
-
-#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
-
-// prototypes
-#ifdef TX_TIMEOUT
-static void ar2313_tx_timeout(struct net_device *dev);
-#endif
-static void ar2313_halt(struct net_device *dev);
-static void rx_tasklet_func(unsigned long data);
-static void rx_tasklet_cleanup(struct net_device *dev);
-static void ar2313_multicast_list(struct net_device *dev);
-
-static int mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
-static int mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
-static int mdiobus_reset(struct mii_bus *bus);
-static int mdiobus_probe (struct net_device *dev);
-static void ar2313_adjust_link(struct net_device *dev);
-
-#ifndef ERR
-#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-#endif
-
-
-int __init ar2313_probe(struct platform_device *pdev)
-{
-	struct net_device *dev;
-	struct ar2313_private *sp;
-	struct resource *res;
-	unsigned long ar_eth_base;
-	char buf[64];
-
-	dev = alloc_etherdev(sizeof(struct ar2313_private));
-
-	if (dev == NULL) {
-		printk(KERN_ERR
-			   "ar2313: Unable to allocate net_device structure!\n");
-		return -ENOMEM;
-	}
-
-	platform_set_drvdata(pdev, dev);
-
-	sp = netdev_priv(dev);
-	sp->dev = dev;
-	sp->cfg = pdev->dev.platform_data;
-
-	sprintf(buf, "eth%d_membase", pdev->id);
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf);
-	if (!res)
-		return -ENODEV;
-
-	sp->link = 0;
-	ar_eth_base = res->start;
-	sp->phy = sp->cfg->phy;
-
-	sprintf(buf, "eth%d_irq", pdev->id);
-	dev->irq = platform_get_irq_byname(pdev, buf);
-
-	spin_lock_init(&sp->lock);
-
-	/* initialize func pointers */
-	dev->open = &ar2313_open;
-	dev->stop = &ar2313_close;
-	dev->hard_start_xmit = &ar2313_start_xmit;
-
-	dev->set_multicast_list = &ar2313_multicast_list;
-#ifdef TX_TIMEOUT
-	dev->tx_timeout = ar2313_tx_timeout;
-	dev->watchdog_timeo = AR2313_TX_TIMEOUT;
-#endif
-	dev->do_ioctl = &ar2313_ioctl;
-
-	// SAMEER: do we need this?
-	dev->features |= NETIF_F_HIGHDMA;
-
-	tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
-	tasklet_disable(&sp->rx_tasklet);
-
-	sp->eth_regs =
-		ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs));
-	if (!sp->eth_regs) {
-		printk("Can't remap eth registers\n");
-		return (-ENXIO);
-	}
-
-	/*
-	 * When there's only one MAC, PHY regs are typically on ENET0,
-	 * even though the MAC might be on ENET1.
-	 * Needto remap PHY regs separately in this case
-	 */
-	if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs))
-		sp->phy_regs = sp->eth_regs;
-	else {
-		sp->phy_regs =
-			ioremap_nocache(virt_to_phys(sp->cfg->phy_base),
-							sizeof(*sp->phy_regs));
-		if (!sp->phy_regs) {
-			printk("Can't remap phy registers\n");
-			return (-ENXIO);
-		}
-	}
-
-	sp->dma_regs =
-		ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000),
-						sizeof(*sp->dma_regs));
-	dev->base_addr = (unsigned int) sp->dma_regs;
-	if (!sp->dma_regs) {
-		printk("Can't remap DMA registers\n");
-		return (-ENXIO);
-	}
-
-	sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4);
-	if (!sp->int_regs) {
-		printk("Can't remap INTERRUPT registers\n");
-		return (-ENXIO);
-	}
-
-	strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
-	sp->name[sizeof(sp->name) - 1] = '\0';
-	memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
-	sp->board_idx = BOARD_IDX_STATIC;
-
-	if (ar2313_init(dev)) {
-		/*
-		 * ar2313_init() calls ar2313_init_cleanup() on error.
-		 */
-		kfree(dev);
-		return -ENODEV;
-	}
-
-	if (register_netdev(dev)) {
-		printk("%s: register_netdev failed\n", __func__);
-		return -1;
-	}
-
-	printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
-		   dev->name, sp->name,
-		   dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
-		   dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
-
-	sp->mii_bus.priv = dev;
-	sp->mii_bus.read = mdiobus_read;
-	sp->mii_bus.write = mdiobus_write;
-	sp->mii_bus.reset = mdiobus_reset;
-	sp->mii_bus.name = "ar2313_eth_mii";
-	sp->mii_bus.id = 0;
-	sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL);
-	*sp->mii_bus.irq = PHY_POLL;
-
-	mdiobus_register(&sp->mii_bus);
-
-	if (mdiobus_probe(dev) != 0) {
-		printk(KERN_ERR "ar2313: mdiobus_probe failed");
-		rx_tasklet_cleanup(dev);
-		ar2313_init_cleanup(dev);
-		unregister_netdev(dev);
-		kfree(dev);
-	} else {
-		/* start link poll timer */
-		ar2313_setup_timer(dev);
-	}
-
-	return 0;
-}
-
-#if 0
-static void ar2313_dump_regs(struct net_device *dev)
-{
-	unsigned int *ptr, i;
-	struct ar2313_private *sp = netdev_priv(dev);
-
-	ptr = (unsigned int *) sp->eth_regs;
-	for (i = 0; i < (sizeof(ETHERNET_STRUCT) / sizeof(unsigned int));
-		 i++, ptr++) {
-		printk("ENET: %08x = %08x\n", (int) ptr, *ptr);
-	}
-
-	ptr = (unsigned int *) sp->dma_regs;
-	for (i = 0; i < (sizeof(DMA) / sizeof(unsigned int)); i++, ptr++) {
-		printk("DMA: %08x = %08x\n", (int) ptr, *ptr);
-	}
-
-	ptr = (unsigned int *) sp->int_regs;
-	for (i = 0; i < (sizeof(INTERRUPT) / sizeof(unsigned int)); i++, ptr++) {
-		printk("INT: %08x = %08x\n", (int) ptr, *ptr);
-	}
-
-	for (i = 0; i < AR2313_DESCR_ENTRIES; i++) {
-		ar2313_descr_t *td = &sp->tx_ring[i];
-		printk("Tx desc %2d: %08x %08x %08x %08x\n", i,
-			   td->status, td->devcs, td->addr, td->descr);
-	}
-}
-#endif
-
-#ifdef TX_TIMEOUT
-static void ar2313_tx_timeout(struct net_device *dev)
-{
-	struct ar2313_private *sp = netdev_priv(dev);
-	unsigned long flags;
-
-#if DEBUG_TX
-	printk("Tx timeout\n");
-#endif
-	spin_lock_irqsave(&sp->lock, flags);
-	ar2313_restart(dev);
-	spin_unlock_irqrestore(&sp->lock, flags);
-}
-#endif
-
-#if DEBUG_MC
-static void printMcList(struct net_device *dev)
-{
-	struct dev_mc_list *list = dev->mc_list;
-	int num = 0, i;
-	while (list) {
-		printk("%d MC ADDR ", num);
-		for (i = 0; i < list->dmi_addrlen; i++) {
-			printk(":%02x", list->dmi_addr[i]);
-		}
-		list = list->next;
-		printk("\n");
-	}
-}
-#endif
-
-/*
- * Set or clear the multicast filter for this adaptor.
- * THIS IS ABSOLUTE CRAP, disabled
- */
-static void ar2313_multicast_list(struct net_device *dev)
-{
-	/*
-	 * Always listen to broadcasts and
-	 * treat IFF bits independently
-	 */
-	struct ar2313_private *sp = netdev_priv(dev);
-	unsigned int recognise;
-
-	recognise = sp->eth_regs->mac_control;
-
-	if (dev->flags & IFF_PROMISC) {	/* set promiscuous mode */
-		recognise |= MAC_CONTROL_PR;
-	} else {
-		recognise &= ~MAC_CONTROL_PR;
-	}
-
-	if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15)) {
-#if DEBUG_MC
-		printMcList(dev);
-		printk("%s: all MULTICAST mc_count %d\n", __FUNCTION__,
-			   dev->mc_count);
-#endif
-		recognise |= MAC_CONTROL_PM;	/* all multicast */
-	} else if (dev->mc_count > 0) {
-#if DEBUG_MC
-		printMcList(dev);
-		printk("%s: mc_count %d\n", __FUNCTION__, dev->mc_count);
-#endif
-		recognise |= MAC_CONTROL_PM;	/* for the time being */
-	}
-#if DEBUG_MC
-	printk("%s: setting %08x to %08x\n", __FUNCTION__, (int) sp->eth_regs,
-		   recognise);
-#endif
-
-	sp->eth_regs->mac_control = recognise;
-}
-
-static void rx_tasklet_cleanup(struct net_device *dev)
-{
-	struct ar2313_private *sp = netdev_priv(dev);
-
-	/*
-	 * Tasklet may be scheduled. Need to get it removed from the list
-	 * since we're about to free the struct.
-	 */
-
-	sp->unloading = 1;
-	tasklet_enable(&sp->rx_tasklet);
-	tasklet_kill(&sp->rx_tasklet);
-}
-
-static int __exit ar2313_remove(struct platform_device *pdev)
-{
-	struct net_device *dev = platform_get_drvdata(pdev);
-	rx_tasklet_cleanup(dev);
-	ar2313_init_cleanup(dev);
-	unregister_netdev(dev);
-	kfree(dev);
-	return 0;
-}
-
-
-/*
- * Restart the AR2313 ethernet controller.
- */
-static int ar2313_restart(struct net_device *dev)
-{
-	/* disable interrupts */
-	disable_irq(dev->irq);
-
-	/* stop mac */
-	ar2313_halt(dev);
-
-	/* initialize */
-	ar2313_init(dev);
-
-	/* enable interrupts */
-	enable_irq(dev->irq);
-
-	return 0;
-}
-
-static struct platform_driver ar2313_driver = {
-	.driver.name = "ar531x-eth",
-	.probe = ar2313_probe,
-	.remove = ar2313_remove,
-};
-
-int __init ar2313_module_init(void)
-{
-	return platform_driver_register(&ar2313_driver);
-}
-
-void __exit ar2313_module_cleanup(void)
-{
-	platform_driver_unregister(&ar2313_driver);
-}
-
-module_init(ar2313_module_init);
-module_exit(ar2313_module_cleanup);
-
-
-static void ar2313_free_descriptors(struct net_device *dev)
-{
-	struct ar2313_private *sp = netdev_priv(dev);
-	if (sp->rx_ring != NULL) {
-		kfree((void *) KSEG0ADDR(sp->rx_ring));
-		sp->rx_ring = NULL;
-		sp->tx_ring = NULL;
-	}
-}
-
-
-static int ar2313_allocate_descriptors(struct net_device *dev)
-{
-	struct ar2313_private *sp = netdev_priv(dev);
-	int size;
-	int j;
-	ar2313_descr_t *space;
-
-	if (sp->rx_ring != NULL) {
-		printk("%s: already done.\n", __FUNCTION__);
-		return 0;
-	}
-
-	size =
-		(sizeof(ar2313_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
-	space = kmalloc(size, GFP_KERNEL);
-	if (space == NULL)
-		return 1;
-
-	/* invalidate caches */
-	dma_cache_inv((unsigned int) space, size);
-
-	/* now convert pointer to KSEG1 */
-	space = (ar2313_descr_t *) KSEG1ADDR(space);
-
-	memset((void *) space, 0, size);
-
-	sp->rx_ring = space;
-	space += AR2313_DESCR_ENTRIES;
-
-	sp->tx_ring = space;
-	space += AR2313_DESCR_ENTRIES;
-
-	/* Initialize the transmit Descriptors */
-	for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-		ar2313_descr_t *td = &sp->tx_ring[j];
-		td->status = 0;
-		td->devcs = DMA_TX1_CHAINED;
-		td->addr = 0;
-		td->descr =
-			virt_to_phys(&sp->
-						 tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]);
-	}
-
-	return 0;
-}
-
-
-/*
- * Generic cleanup handling data allocated during init. Used when the
- * module is unloaded or if an error occurs during initialization
- */
-static void ar2313_init_cleanup(struct net_device *dev)
-{
-	struct ar2313_private *sp = netdev_priv(dev);
-	struct sk_buff *skb;
-	int j;
-
-	ar2313_free_descriptors(dev);
-
-	if (sp->eth_regs)
-		iounmap((void *) sp->eth_regs);
-	if (sp->dma_regs)
-		iounmap((void *) sp->dma_regs);
-
-	if (sp->rx_skb) {
-		for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-			skb = sp->rx_skb[j];
-			if (skb) {
-				sp->rx_skb[j] = NULL;
-				dev_kfree_skb(skb);
-			}
-		}
-		kfree(sp->rx_skb);
-		sp->rx_skb = NULL;
-	}
-
-	if (sp->tx_skb) {
-		for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-			skb = sp->tx_skb[j];
-			if (skb) {
-				sp->tx_skb[j] = NULL;
-				dev_kfree_skb(skb);
-			}
-		}
-		kfree(sp->tx_skb);
-		sp->tx_skb = NULL;
-	}
-}
-
-static int ar2313_setup_timer(struct net_device *dev)
-{
-	struct ar2313_private *sp = netdev_priv(dev);
-
-	init_timer(&sp->link_timer);
-
-	sp->link_timer.function = ar2313_link_timer_fn;
-	sp->link_timer.data = (int) dev;
-	sp->link_timer.expires = jiffies + HZ;
-
-	add_timer(&sp->link_timer);
-	return 0;
-
-}
-
-static void ar2313_link_timer_fn(unsigned long data)
-{
-	struct net_device *dev = (struct net_device *) data;
-	struct ar2313_private *sp = netdev_priv(dev);
-
-	// see if the link status changed
-	// This was needed to make sure we set the PHY to the
-	// autonegotiated value of half or full duplex.
-	ar2313_check_link(dev);
-
-	// Loop faster when we don't have link.
-	// This was needed to speed up the AP bootstrap time.
-	if (sp->link == 0) {
-		mod_timer(&sp->link_timer, jiffies + HZ / 2);
-	} else {
-		mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
-	}
-}
-
-static void ar2313_check_link(struct net_device *dev)
-{
-	struct ar2313_private *sp = netdev_priv(dev);
-	u16 phyData;
-
-	phyData = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMSR);
-	if (sp->phyData != phyData) {
-		if (phyData & BMSR_LSTATUS) {
-			/* link is present, ready link partner ability to deterine
-			   duplexity */
-			int duplex = 0;
-			u16 reg;
-
-			sp->link = 1;
-			reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMCR);
-			if (reg & BMCR_ANENABLE) {
-				/* auto neg enabled */
-				reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_LPA);
-				duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
-			} else {
-				/* no auto neg, just read duplex config */
-				duplex = (reg & BMCR_FULLDPLX) ? 1 : 0;
-			}
-
-			printk(KERN_INFO "%s: Configuring MAC for %s duplex\n",
-				   dev->name, (duplex) ? "full" : "half");
-
-			if (duplex) {
-				/* full duplex */
-				sp->eth_regs->mac_control =
-					((sp->eth_regs->
-					  mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO);
-			} else {
-				/* half duplex */
-				sp->eth_regs->mac_control =
-					((sp->eth_regs->
-					  mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F);
-			}
-		} else {
-			/* no link */
-			sp->link = 0;
-		}
-		sp->phyData = phyData;
-	}
-}
-
-static int ar2313_reset_reg(struct net_device *dev)
-{
-	struct ar2313_private *sp = netdev_priv(dev);
-	unsigned int ethsal, ethsah;
-	unsigned int flags;
-
-	*sp->int_regs |= sp->cfg->reset_mac;
-	mdelay(10);
-	*sp->int_regs &= ~sp->cfg->reset_mac;
-	mdelay(10);
-	*sp->int_regs |= sp->cfg->reset_phy;
-	mdelay(10);
-	*sp->int_regs &= ~sp->cfg->reset_phy;
-	mdelay(10);
-
-	sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
-	mdelay(10);
-	sp->dma_regs->bus_mode =
-		((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
-
-	/* enable interrupts */
-	sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
-							  DMA_STATUS_NIS |
-							  DMA_STATUS_RI |
-							  DMA_STATUS_TI | DMA_STATUS_FBE);
-	sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring);
-	sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring);
-	sp->dma_regs->control =
-		(DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
-
-	sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
-	sp->eth_regs->vlan_tag = (0x8100);
-
-	/* Enable Ethernet Interface */
-	flags = (MAC_CONTROL_TE |	/* transmit enable */
-			 MAC_CONTROL_PM |	/* pass mcast */
-			 MAC_CONTROL_F |	/* full duplex */
-			 MAC_CONTROL_HBD);	/* heart beat disabled */
-
-	if (dev->flags & IFF_PROMISC) {	/* set promiscuous mode */
-		flags |= MAC_CONTROL_PR;
-	}
-	sp->eth_regs->mac_control = flags;
-
-	/* Set all Ethernet station address registers to their initial values */
-	ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
-			  (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
-
-	ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
-			  (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
-			  (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
-			  (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
-
-	sp->eth_regs->mac_addr[0] = ethsah;
-	sp->eth_regs->mac_addr[1] = ethsal;
-
-	mdelay(10);
-
-	return (0);
-}
-
-
-static int ar2313_init(struct net_device *dev)
-{
-	struct ar2313_private *sp = netdev_priv(dev);
-	int ecode = 0;
-
-	/*
-	 * Allocate descriptors
-	 */
-	if (ar2313_allocate_descriptors(dev)) {
-		printk("%s: %s: ar2313_allocate_descriptors failed\n",
-			   dev->name, __FUNCTION__);
-		ecode = -EAGAIN;
-		goto init_error;
-	}
-
-	/*
-	 * Get the memory for the skb rings.
-	 */
-	if (sp->rx_skb == NULL) {
-		sp->rx_skb =
-			kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
-					GFP_KERNEL);
-		if (!(sp->rx_skb)) {
-			printk("%s: %s: rx_skb kmalloc failed\n",
-				   dev->name, __FUNCTION__);
-			ecode = -EAGAIN;
-			goto init_error;
-		}
-	}
-	memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-
-	if (sp->tx_skb == NULL) {
-		sp->tx_skb =
-			kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
-					GFP_KERNEL);
-		if (!(sp->tx_skb)) {
-			printk("%s: %s: tx_skb kmalloc failed\n",
-				   dev->name, __FUNCTION__);
-			ecode = -EAGAIN;
-			goto init_error;
-		}
-	}
-	memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-
-	/*
-	 * Set tx_csm before we start receiving interrupts, otherwise
-	 * the interrupt handler might think it is supposed to process
-	 * tx ints before we are up and running, which may cause a null
-	 * pointer access in the int handler.
-	 */
-	sp->rx_skbprd = 0;
-	sp->cur_rx = 0;
-	sp->tx_prd = 0;
-	sp->tx_csm = 0;
-
-	/*
-	 * Zero the stats before starting the interface
-	 */
-	memset(&dev->stats, 0, sizeof(dev->stats));
-
-	/*
-	 * We load the ring here as there seem to be no way to tell the
-	 * firmware to wipe the ring without re-initializing it.
-	 */
-	ar2313_load_rx_ring(dev, RX_RING_SIZE);
-
-	/*
-	 * Init hardware
-	 */
-	ar2313_reset_reg(dev);
-
-	/*
-	 * Get the IRQ
-	 */
-	ecode =
-		request_irq(dev->irq, &ar2313_interrupt,
-					IRQF_SHARED | IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
-					dev->name, dev);
-	if (ecode) {
-		printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
-			   dev->name, __FUNCTION__, dev->irq);
-		goto init_error;
-	}
-
-
-	tasklet_enable(&sp->rx_tasklet);
-
-	return 0;
-
-  init_error:
-	ar2313_init_cleanup(dev);
-	return ecode;
-}
-
-/*
- * Load the rx ring.
- *
- * Loading rings is safe without holding the spin lock since this is
- * done only before the device is enabled, thus no interrupts are
- * generated and by the interrupt handler/tasklet handler.
- */
-static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs)
-{
-
-	struct ar2313_private *sp = netdev_priv(dev);
-	short i, idx;
-
-	idx = sp->rx_skbprd;
-
-	for (i = 0; i < nr_bufs; i++) {
-		struct sk_buff *skb;
-		ar2313_descr_t *rd;
-
-		if (sp->rx_skb[idx]) {
-#if DEBUG_RX
-			printk(KERN_INFO "ar2313 rx refill full\n");
-#endif							/* DEBUG */
-			break;
-		}
-		// partha: create additional room for the second GRE fragment
-		skb = alloc_skb(AR2313_BUFSIZE + 128, GFP_ATOMIC);
-		if (!skb) {
-			printk("\n\n\n\n %s: No memory in system\n\n\n\n",
-				   __FUNCTION__);
-			break;
-		}
-		// partha: create additional room in the front for tx pkt capture
-		skb_reserve(skb, 32);
-
-		/*
-		 * Make sure IP header starts on a fresh cache line.
-		 */
-		skb->dev = dev;
-		skb_reserve(skb, RX_OFFSET);
-		sp->rx_skb[idx] = skb;
-
-		rd = (ar2313_descr_t *) & sp->rx_ring[idx];
-
-		/* initialize dma descriptor */
-		rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-					 DMA_RX1_CHAINED);
-		rd->addr = virt_to_phys(skb->data);
-		rd->descr =
-			virt_to_phys(&sp->
-						 rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]);
-		rd->status = DMA_RX_OWN;
-
-		idx = DSC_NEXT(idx);
-	}
-
-	if (!i) {
-#if DEBUG_ERR
-		printk(KERN_INFO
-			   "Out of memory when allocating standard receive buffers\n");
-#endif							/* DEBUG */
-	} else {
-		sp->rx_skbprd = idx;
-	}
-
-	return;
-}
-
-#define AR2313_MAX_PKTS_PER_CALL        64
-
-static int ar2313_rx_int(struct net_device *dev)
-{
-	struct ar2313_private *sp = netdev_priv(dev);
-	struct sk_buff *skb, *skb_new;
-	ar2313_descr_t *rxdesc;
-	unsigned int status;
-	u32 idx;
-	int pkts = 0;
-	int rval;
-
-	idx = sp->cur_rx;
-
-	/* process at most the entire ring and then wait for another interrupt
-	 */
-	while (1) {
-
-		rxdesc = &sp->rx_ring[idx];
-		status = rxdesc->status;
-		if (status & DMA_RX_OWN) {
-			/* SiByte owns descriptor or descr not yet filled in */
-			rval = 0;
-			break;
-		}
-
-		if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
-			rval = 1;
-			break;
-		}
-#if DEBUG_RX
-		printk("index %d\n", idx);
-		printk("RX status %08x\n", rxdesc->status);
-		printk("RX devcs  %08x\n", rxdesc->devcs);
-		printk("RX addr   %08x\n", rxdesc->addr);
-		printk("RX descr  %08x\n", rxdesc->descr);
-#endif
-
-		if ((status & (DMA_RX_ERROR | DMA_RX_ERR_LENGTH)) &&
-			(!(status & DMA_RX_LONG))) {
-#if DEBUG_RX
-			printk("%s: rx ERROR %08x\n", __FUNCTION__, status);
-#endif
-			dev->stats.rx_errors++;
-			dev->stats.rx_dropped++;
-
-			/* add statistics counters */
-			if (status & DMA_RX_ERR_CRC)
-				dev->stats.rx_crc_errors++;
-			if (status & DMA_RX_ERR_COL)
-				dev->stats.rx_over_errors++;
-			if (status & DMA_RX_ERR_LENGTH)
-				dev->stats.rx_length_errors++;
-			if (status & DMA_RX_ERR_RUNT)
-				dev->stats.rx_over_errors++;
-			if (status & DMA_RX_ERR_DESC)
-				dev->stats.rx_over_errors++;
-
-		} else {
-			/* alloc new buffer. */
-			skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128);
-			if (skb_new != NULL) {
-
-				skb = sp->rx_skb[idx];
-				/* set skb */
-				skb_put(skb,
-						((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
-
-				dev->stats.rx_bytes += skb->len;
-				skb->protocol = eth_type_trans(skb, dev);
-				/* pass the packet to upper layers */
-				netif_rx(skb);
-
-				skb_new->dev = dev;
-				/* 16 bit align */
-				skb_reserve(skb_new, RX_OFFSET + 32);
-				/* reset descriptor's curr_addr */
-				rxdesc->addr = virt_to_phys(skb_new->data);
-
-				dev->stats.rx_packets++;
-				sp->rx_skb[idx] = skb_new;
-			} else {
-				dev->stats.rx_dropped++;
-			}
-		}
-
-		rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-						 DMA_RX1_CHAINED);
-		rxdesc->status = DMA_RX_OWN;
-
-		idx = DSC_NEXT(idx);
-	}
-
-	sp->cur_rx = idx;
-
-	return rval;
-}
-
-
-static void ar2313_tx_int(struct net_device *dev)
-{
-	struct ar2313_private *sp = netdev_priv(dev);
-	u32 idx;
-	struct sk_buff *skb;
-	ar2313_descr_t *txdesc;
-	unsigned int status = 0;
-
-	idx = sp->tx_csm;
-
-	while (idx != sp->tx_prd) {
-
-		txdesc = &sp->tx_ring[idx];
-
-#if DEBUG_TX
-		printk
-			("%s: TXINT: csm=%d idx=%d prd=%d status=%x devcs=%x addr=%08x descr=%x\n",
-			 dev->name, sp->tx_csm, idx, sp->tx_prd, txdesc->status,
-			 txdesc->devcs, txdesc->addr, txdesc->descr);
-#endif							/* DEBUG */
-
-		if ((status = txdesc->status) & DMA_TX_OWN) {
-			/* ar2313 dma still owns descr */
-			break;
-		}
-		/* done with this descriptor */
-		dma_unmap_single(NULL, txdesc->addr,
-						 txdesc->devcs & DMA_TX1_BSIZE_MASK,
-						 DMA_TO_DEVICE);
-		txdesc->status = 0;
-
-		if (status & DMA_TX_ERROR) {
-			dev->stats.tx_errors++;
-			dev->stats.tx_dropped++;
-			if (status & DMA_TX_ERR_UNDER)
-				dev->stats.tx_fifo_errors++;
-			if (status & DMA_TX_ERR_HB)
-				dev->stats.tx_heartbeat_errors++;
-			if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK))
-				dev->stats.tx_carrier_errors++;
-			if (status & (DMA_TX_ERR_LATE |
-						  DMA_TX_ERR_COL |
-						  DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER))
-				dev->stats.tx_aborted_errors++;
-		} else {
-			/* transmit OK */
-			dev->stats.tx_packets++;
-		}
-
-		skb = sp->tx_skb[idx];
-		sp->tx_skb[idx] = NULL;
-		idx = DSC_NEXT(idx);
-		dev->stats.tx_bytes += skb->len;
-		dev_kfree_skb_irq(skb);
-	}
-
-	sp->tx_csm = idx;
-
-	return;
-}
-
-
-static void rx_tasklet_func(unsigned long data)
-{
-	struct net_device *dev = (struct net_device *) data;
-	struct ar2313_private *sp = netdev_priv(dev);
-
-	if (sp->unloading) {
-		return;
-	}
-
-	if (ar2313_rx_int(dev)) {
-		tasklet_hi_schedule(&sp->rx_tasklet);
-	} else {
-		unsigned long flags;
-		spin_lock_irqsave(&sp->lock, flags);
-		sp->dma_regs->intr_ena |= DMA_STATUS_RI;
-		spin_unlock_irqrestore(&sp->lock, flags);
-	}
-}
-
-static void rx_schedule(struct net_device *dev)
-{
-	struct ar2313_private *sp = netdev_priv(dev);
-
-	sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
-
-	tasklet_hi_schedule(&sp->rx_tasklet);
-}
-
-static irqreturn_t ar2313_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = (struct net_device *) dev_id;
-	struct ar2313_private *sp = netdev_priv(dev);
-	unsigned int status, enabled;
-
-	/* clear interrupt */
-	/*
-	 * Don't clear RI bit if currently disabled.
-	 */
-	status = sp->dma_regs->status;
-	enabled = sp->dma_regs->intr_ena;
-	sp->dma_regs->status = status & enabled;
-
-	if (status & DMA_STATUS_NIS) {
-		/* normal status */
-		/*
-		 * Don't schedule rx processing if interrupt
-		 * is already disabled.
-		 */
-		if (status & enabled & DMA_STATUS_RI) {
-			/* receive interrupt */
-			rx_schedule(dev);
-		}
-		if (status & DMA_STATUS_TI) {
-			/* transmit interrupt */
-			ar2313_tx_int(dev);
-		}
-	}
-
-	if (status & DMA_STATUS_AIS) {
-#if DEBUG_INT
-		printk("%s: AIS set %08x & %x\n", __FUNCTION__,
-			   status, (DMA_STATUS_FBE | DMA_STATUS_TPS));
-#endif
-		/* abnormal status */
-		if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
-			ar2313_restart(dev);
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-
-static int ar2313_open(struct net_device *dev)
-{
-	struct ar2313_private *sp = netdev_priv(dev);
-	unsigned int ethsal, ethsah;
-
-	/* reset the hardware, in case the MAC address changed */
-	ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
-			  (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
-
-	ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
-			  (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
-			  (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
-			  (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
-
-	sp->eth_regs->mac_addr[0] = ethsah;
-	sp->eth_regs->mac_addr[1] = ethsal;
-
-	mdelay(10);
-
-	dev->mtu = 1500;
-	netif_start_queue(dev);
-
-	sp->eth_regs->mac_control |= MAC_CONTROL_RE;
-
-	return 0;
-}
-
-static void ar2313_halt(struct net_device *dev)
-{
-	struct ar2313_private *sp = netdev_priv(dev);
-	int j;
-
-	tasklet_disable(&sp->rx_tasklet);
-
-	/* kill the MAC */
-	sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE |	/* disable Receives */
-								   MAC_CONTROL_TE);	/* disable Transmits */
-	/* stop dma */
-	sp->dma_regs->control = 0;
-	sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
-
-	/* place phy and MAC in reset */
-	*sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy);
-
-	/* free buffers on tx ring */
-	for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-		struct sk_buff *skb;
-		ar2313_descr_t *txdesc;
-
-		txdesc = &sp->tx_ring[j];
-		txdesc->descr = 0;
-
-		skb = sp->tx_skb[j];
-		if (skb) {
-			dev_kfree_skb(skb);
-			sp->tx_skb[j] = NULL;
-		}
-	}
-}
-
-/*
- * close should do nothing. Here's why. It's called when
- * 'ifconfig bond0 down' is run. If it calls free_irq then
- * the irq is gone forever ! When bond0 is made 'up' again,
- * the ar2313_open () does not call request_irq (). Worse,
- * the call to ar2313_halt() generates a WDOG reset due to
- * the write to 'sp->int_regs' and the box reboots.
- * Commenting this out is good since it allows the
- * system to resume when bond0 is made up again.
- */
-static int ar2313_close(struct net_device *dev)
-{
-#if 0
-	/*
-	 * Disable interrupts
-	 */
-	disable_irq(dev->irq);
-
-	/*
-	 * Without (or before) releasing irq and stopping hardware, this
-	 * is an absolute non-sense, by the way. It will be reset instantly
-	 * by the first irq.
-	 */
-	netif_stop_queue(dev);
-
-	/* stop the MAC and DMA engines */
-	ar2313_halt(dev);
-
-	/* release the interrupt */
-	free_irq(dev->irq, dev);
-
-#endif
-	return 0;
-}
-
-static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct ar2313_private *sp = netdev_priv(dev);
-	ar2313_descr_t *td;
-	u32 idx;
-
-	idx = sp->tx_prd;
-	td = &sp->tx_ring[idx];
-
-	if (td->status & DMA_TX_OWN) {
-#if DEBUG_TX
-		printk("%s: No space left to Tx\n", __FUNCTION__);
-#endif
-		/* free skbuf and lie to the caller that we sent it out */
-		dev->stats.tx_dropped++;
-		dev_kfree_skb(skb);
-
-		/* restart transmitter in case locked */
-		sp->dma_regs->xmt_poll = 0;
-		return 0;
-	}
-
-	/* Setup the transmit descriptor. */
-	td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
-				 (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED));
-	td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-	td->status = DMA_TX_OWN;
-
-	/* kick transmitter last */
-	sp->dma_regs->xmt_poll = 0;
-
-#if DEBUG_TX
-	printk("index %d\n", idx);
-	printk("TX status %08x\n", td->status);
-	printk("TX devcs  %08x\n", td->devcs);
-	printk("TX addr   %08x\n", td->addr);
-	printk("TX descr  %08x\n", td->descr);
-#endif
-
-	sp->tx_skb[idx] = skb;
-	idx = DSC_NEXT(idx);
-	sp->tx_prd = idx;
-
-	return 0;
-}
-
-static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
-	struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
-	struct ar2313_private *sp = netdev_priv(dev);
-	int ret;
-
-	switch (cmd) {
-
-	case SIOCETHTOOL:
-		spin_lock_irq(&sp->lock);
-		ret = phy_ethtool_ioctl(sp->phy_dev, (void *) ifr->ifr_data);
-		spin_unlock_irq(&sp->lock);
-		return ret;
-
-	case SIOCSIFHWADDR:
-		if (copy_from_user
-			(dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
-			return -EFAULT;
-		return 0;
-
-	case SIOCGIFHWADDR:
-		if (copy_to_user
-			(ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
-			return -EFAULT;
-		return 0;
-
-	case SIOCGMIIPHY:
-	case SIOCGMIIREG:
-	case SIOCSMIIREG:
-		return phy_mii_ioctl(sp->phy_dev, data, cmd);
-
-	default:
-		break;
-	}
-
-	return -EOPNOTSUPP;
-}
-
-static void ar2313_adjust_link(struct net_device *dev)
-{
-	struct ar2313_private *sp = netdev_priv(dev);
-	unsigned int mc;
-
-	if (!sp->phy_dev->link)
-		return;
-
-	if (sp->phy_dev->duplex != sp->oldduplex) {
-		mc = readl(&sp->eth_regs->mac_control);
-		mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO);
-		if (sp->phy_dev->duplex)
-			mc |= MAC_CONTROL_F;
-		else
-			mc |= MAC_CONTROL_DRO;
-		writel(mc, &sp->eth_regs->mac_control);
-		sp->oldduplex = sp->phy_dev->duplex;
-	}
-}
-
-#define MII_ADDR(phy, reg) \
-	((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
-
-static int
-mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
-{
-	struct net_device *const dev = bus->priv;
-	struct ar2313_private *sp = netdev_priv(dev);
-	volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
-
-	ethernet->mii_addr = MII_ADDR(phy_addr, regnum);
-	while (ethernet->mii_addr & MII_ADDR_BUSY);
-	return (ethernet->mii_data >> MII_DATA_SHIFT);
-}
-
-static int
-mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
-             u16 value)
-{
-	struct net_device *const dev = bus->priv;
-	struct ar2313_private *sp = netdev_priv(dev);
-	volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
-
-	while (ethernet->mii_addr & MII_ADDR_BUSY);
-	ethernet->mii_data = value << MII_DATA_SHIFT;
-	ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE;
-
-	return 0;
-}
-
-static int mdiobus_reset(struct mii_bus *bus)
-{
-	struct net_device *const dev = bus->priv;
-
-	ar2313_reset_reg(dev);
-
-	return 0;
-}
-
-static int mdiobus_probe (struct net_device *dev)
-{
-	struct ar2313_private *const sp = netdev_priv(dev);
-	struct phy_device *phydev = NULL;
-	int phy_addr;
-
-	/* find the first (lowest address) PHY on the current MAC's MII bus */
-	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
-		if (sp->mii_bus.phy_map[phy_addr]) {
-			phydev = sp->mii_bus.phy_map[phy_addr];
-			break; /* break out with first one found */
-		}
-
-	if (!phydev) {
-		printk (KERN_ERR "ar2313:%s: no PHY found\n", dev->name);
-		return -1;
-	}
-
-	/* now we are supposed to have a proper phydev, to attach to... */
-	BUG_ON(!phydev);
-	BUG_ON(phydev->attached_dev);
-
-	phydev = phy_connect(dev, phydev->dev.bus_id, &ar2313_adjust_link, 0,
-		PHY_INTERFACE_MODE_MII);
-
-	if (IS_ERR(phydev)) {
-		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-		return PTR_ERR(phydev);
-	}
-
-	/* mask with MAC supported features */
-	phydev->supported &= (SUPPORTED_10baseT_Half
-		| SUPPORTED_10baseT_Full
-		| SUPPORTED_100baseT_Half
-		| SUPPORTED_100baseT_Full
-		| SUPPORTED_Autoneg
-		/* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
-		| SUPPORTED_MII
-		| SUPPORTED_TP);
-
-	phydev->advertising = phydev->supported;
-
-	sp->oldduplex = -1;
-	sp->phy_dev = phydev;
-
-	printk(KERN_INFO "%s: attached PHY driver [%s] "
-		"(mii_bus:phy_addr=%s)\n",
-		dev->name, phydev->drv->name, phydev->dev.bus_id);
-
-	return 0;
-}
-
diff --git a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.h b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.h
deleted file mode 100644
index 9fa49caa79..0000000000
--- a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.h
+++ /dev/null
@@ -1,195 +0,0 @@
-#ifndef _AR2313_H_
-#define _AR2313_H_
-
-#include <linux/autoconf.h>
-#include <asm/bootinfo.h>
-#include <ar531x_platform.h>
-
-/*
- * probe link timer - 5 secs
- */
-#define LINK_TIMER    (5*HZ)
-
-#define IS_DMA_TX_INT(X)   (((X) & (DMA_STATUS_TI)) != 0)
-#define IS_DMA_RX_INT(X)   (((X) & (DMA_STATUS_RI)) != 0)
-#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN))    == 0)
-
-#define AR2313_TX_TIMEOUT (HZ/4)
-
-/*
- * Rings
- */
-#define DSC_RING_ENTRIES_SIZE	(AR2313_DESCR_ENTRIES * sizeof(struct desc))
-#define DSC_NEXT(idx)	        ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
-
-static inline int tx_space(u32 csm, u32 prd)
-{
-	return (csm - prd - 1) & (AR2313_DESCR_ENTRIES - 1);
-}
-
-#if MAX_SKB_FRAGS
-#define TX_RESERVED	(MAX_SKB_FRAGS+1)	/* +1 for message header */
-#define tx_ring_full(csm, prd)	(tx_space(csm, prd) <= TX_RESERVED)
-#else
-#define tx_ring_full		0
-#endif
-
-#define AR2313_MBGET		2
-#define AR2313_MBSET    	3
-#define AR2313_PCI_RECONFIG	4
-#define AR2313_PCI_DUMP  	5
-#define AR2313_TEST_PANIC	6
-#define AR2313_TEST_NULLPTR	7
-#define AR2313_READ_DATA	8
-#define AR2313_WRITE_DATA	9
-#define AR2313_GET_VERSION	10
-#define AR2313_TEST_HANG	11
-#define AR2313_SYNC		12
-
-
-//
-// New Combo structure for Both Eth0 AND eth1
-//
-typedef struct {
-	volatile unsigned int mac_control;	/* 0x00 */
-	volatile unsigned int mac_addr[2];	/* 0x04 - 0x08 */
-	volatile unsigned int mcast_table[2];	/* 0x0c - 0x10 */
-	volatile unsigned int mii_addr;	/* 0x14 */
-	volatile unsigned int mii_data;	/* 0x18 */
-	volatile unsigned int flow_control;	/* 0x1c */
-	volatile unsigned int vlan_tag;	/* 0x20 */
-	volatile unsigned int pad[7];	/* 0x24 - 0x3c */
-	volatile unsigned int ucast_table[8];	/* 0x40-0x5c */
-
-} ETHERNET_STRUCT;
-
-/********************************************************************
- * Interrupt controller
- ********************************************************************/
-
-typedef struct {
-	volatile unsigned int wdog_control;	/* 0x08 */
-	volatile unsigned int wdog_timer;	/* 0x0c */
-	volatile unsigned int misc_status;	/* 0x10 */
-	volatile unsigned int misc_mask;	/* 0x14 */
-	volatile unsigned int global_status;	/* 0x18 */
-	volatile unsigned int reserved;	/* 0x1c */
-	volatile unsigned int reset_control;	/* 0x20 */
-} INTERRUPT;
-
-/********************************************************************
- * DMA controller
- ********************************************************************/
-typedef struct {
-	volatile unsigned int bus_mode;	/* 0x00 (CSR0) */
-	volatile unsigned int xmt_poll;	/* 0x04 (CSR1) */
-	volatile unsigned int rcv_poll;	/* 0x08 (CSR2) */
-	volatile unsigned int rcv_base;	/* 0x0c (CSR3) */
-	volatile unsigned int xmt_base;	/* 0x10 (CSR4) */
-	volatile unsigned int status;	/* 0x14 (CSR5) */
-	volatile unsigned int control;	/* 0x18 (CSR6) */
-	volatile unsigned int intr_ena;	/* 0x1c (CSR7) */
-	volatile unsigned int rcv_missed;	/* 0x20 (CSR8) */
-	volatile unsigned int reserved[11];	/* 0x24-0x4c (CSR9-19) */
-	volatile unsigned int cur_tx_buf_addr;	/* 0x50 (CSR20) */
-	volatile unsigned int cur_rx_buf_addr;	/* 0x50 (CSR21) */
-} DMA;
-
-/*
- * Struct private for the Sibyte.
- *
- * Elements are grouped so variables used by the tx handling goes
- * together, and will go into the same cache lines etc. in order to
- * avoid cache line contention between the rx and tx handling on SMP.
- *
- * Frequently accessed variables are put at the beginning of the
- * struct to help the compiler generate better/shorter code.
- */
-struct ar2313_private {
-	struct net_device *dev;
-	int version;
-	u32 mb[2];
-
-	volatile ETHERNET_STRUCT *phy_regs;
-	volatile ETHERNET_STRUCT *eth_regs;
-	volatile DMA *dma_regs;
-	volatile u32 *int_regs;
-	struct ar531x_eth *cfg;
-
-	spinlock_t lock;			/* Serialise access to device */
-
-	/*
-	 * RX and TX descriptors, must be adjacent
-	 */
-	ar2313_descr_t *rx_ring;
-	ar2313_descr_t *tx_ring;
-
-
-	struct sk_buff **rx_skb;
-	struct sk_buff **tx_skb;
-
-	/*
-	 * RX elements
-	 */
-	u32 rx_skbprd;
-	u32 cur_rx;
-
-	/*
-	 * TX elements
-	 */
-	u32 tx_prd;
-	u32 tx_csm;
-
-	/*
-	 * Misc elements
-	 */
-	int board_idx;
-	char name[48];
-	struct {
-		u32 address;
-		u32 length;
-		char *mapping;
-	} desc;
-
-
-	struct timer_list link_timer;
-	unsigned short phy;			/* merlot phy = 1, samsung phy = 0x1f */
-	unsigned short mac;
-	unsigned short link;		/* 0 - link down, 1 - link up */
-	u16 phyData;
-
-	struct tasklet_struct rx_tasklet;
-	int unloading;
-
-	struct phy_device *phy_dev;
-	struct mii_bus mii_bus;
-	int oldduplex;
-};
-
-
-/*
- * Prototypes
- */
-static int ar2313_init(struct net_device *dev);
-#ifdef TX_TIMEOUT
-static void ar2313_tx_timeout(struct net_device *dev);
-#endif
-#if 0
-static void ar2313_multicast_list(struct net_device *dev);
-#endif
-static int ar2313_restart(struct net_device *dev);
-#if DEBUG
-static void ar2313_dump_regs(struct net_device *dev);
-#endif
-static void ar2313_load_rx_ring(struct net_device *dev, int bufs);
-static irqreturn_t ar2313_interrupt(int irq, void *dev_id);
-static int ar2313_open(struct net_device *dev);
-static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static int ar2313_close(struct net_device *dev);
-static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr,
-						int cmd);
-static void ar2313_init_cleanup(struct net_device *dev);
-static int ar2313_setup_timer(struct net_device *dev);
-static void ar2313_link_timer_fn(unsigned long data);
-static void ar2313_check_link(struct net_device *dev);
-#endif							/* _AR2313_H_ */
diff --git a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/dma.h b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/dma.h
deleted file mode 100644
index 6d478d21fe..0000000000
--- a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/dma.h
+++ /dev/null
@@ -1,142 +0,0 @@
-#ifndef __ARUBA_DMA_H__
-#define __ARUBA_DMA_H__
-
-/*******************************************************************************
- *
- * Copyright 2002 Integrated Device Technology, Inc.
- *		All rights reserved.
- *
- * DMA register definition.
- *
- * File   : $Id: dma.h,v 1.3 2002/06/06 18:34:03 astichte Exp $
- *
- * Author : ryan.holmQVist@idt.com
- * Date   : 20011005
- * Update :
- *	    $Log: dma.h,v $
- *	    Revision 1.3  2002/06/06 18:34:03  astichte
- *	    Added XXX_PhysicalAddress and XXX_VirtualAddress
- *
- *	    Revision 1.2  2002/06/05 18:30:46  astichte
- *	    Removed IDTField
- *
- *	    Revision 1.1  2002/05/29 17:33:21  sysarch
- *	    jba File moved from vcode/include/idt/acacia
- *
- *
- ******************************************************************************/
-
-#define AR_BIT(x)            (1 << (x))
-#define DMA_RX_ERR_CRC       AR_BIT(1)
-#define DMA_RX_ERR_DRIB      AR_BIT(2)
-#define DMA_RX_ERR_MII       AR_BIT(3)
-#define DMA_RX_EV2           AR_BIT(5)
-#define DMA_RX_ERR_COL       AR_BIT(6)
-#define DMA_RX_LONG          AR_BIT(7)
-#define DMA_RX_LS            AR_BIT(8)	/* last descriptor */
-#define DMA_RX_FS            AR_BIT(9)	/* first descriptor */
-#define DMA_RX_MF            AR_BIT(10)	/* multicast frame */
-#define DMA_RX_ERR_RUNT      AR_BIT(11)	/* runt frame */
-#define DMA_RX_ERR_LENGTH    AR_BIT(12)	/* length error */
-#define DMA_RX_ERR_DESC      AR_BIT(14)	/* descriptor error */
-#define DMA_RX_ERROR         AR_BIT(15)	/* error summary */
-#define DMA_RX_LEN_MASK      0x3fff0000
-#define DMA_RX_LEN_SHIFT     16
-#define DMA_RX_FILT          AR_BIT(30)
-#define DMA_RX_OWN           AR_BIT(31)	/* desc owned by DMA controller */
-
-#define DMA_RX1_BSIZE_MASK   0x000007ff
-#define DMA_RX1_BSIZE_SHIFT  0
-#define DMA_RX1_CHAINED      AR_BIT(24)
-#define DMA_RX1_RER          AR_BIT(25)
-
-#define DMA_TX_ERR_UNDER     AR_BIT(1)	/* underflow error */
-#define DMA_TX_ERR_DEFER     AR_BIT(2)	/* excessive deferral */
-#define DMA_TX_COL_MASK      0x78
-#define DMA_TX_COL_SHIFT     3
-#define DMA_TX_ERR_HB        AR_BIT(7)	/* hearbeat failure */
-#define DMA_TX_ERR_COL       AR_BIT(8)	/* excessive collisions */
-#define DMA_TX_ERR_LATE      AR_BIT(9)	/* late collision */
-#define DMA_TX_ERR_LINK      AR_BIT(10)	/* no carrier */
-#define DMA_TX_ERR_LOSS      AR_BIT(11)	/* loss of carrier */
-#define DMA_TX_ERR_JABBER    AR_BIT(14)	/* transmit jabber timeout */
-#define DMA_TX_ERROR         AR_BIT(15)	/* frame aborted */
-#define DMA_TX_OWN           AR_BIT(31)	/* descr owned by DMA controller */
-
-#define DMA_TX1_BSIZE_MASK   0x000007ff
-#define DMA_TX1_BSIZE_SHIFT  0
-#define DMA_TX1_CHAINED      AR_BIT(24)	/* chained descriptors */
-#define DMA_TX1_TER          AR_BIT(25)	/* transmit end of ring */
-#define DMA_TX1_FS           AR_BIT(29)	/* first segment */
-#define DMA_TX1_LS           AR_BIT(30)	/* last segment */
-#define DMA_TX1_IC           AR_BIT(31)	/* interrupt on completion */
-
-#define RCVPKT_LENGTH(X)     (X  >> 16)	/* Received pkt Length */
-
-#define MAC_CONTROL_RE       AR_BIT(2)	/* receive enable */
-#define MAC_CONTROL_TE       AR_BIT(3)	/* transmit enable */
-#define MAC_CONTROL_DC       AR_BIT(5)	/* Deferral check */
-#define MAC_CONTROL_ASTP     AR_BIT(8)	/* Auto pad strip */
-#define MAC_CONTROL_DRTY     AR_BIT(10)	/* Disable retry */
-#define MAC_CONTROL_DBF      AR_BIT(11)	/* Disable bcast frames */
-#define MAC_CONTROL_LCC      AR_BIT(12)	/* late collision ctrl */
-#define MAC_CONTROL_HP       AR_BIT(13)	/* Hash Perfect filtering */
-#define MAC_CONTROL_HASH     AR_BIT(14)	/* Unicast hash filtering */
-#define MAC_CONTROL_HO       AR_BIT(15)	/* Hash only filtering */
-#define MAC_CONTROL_PB       AR_BIT(16)	/* Pass Bad frames */
-#define MAC_CONTROL_IF       AR_BIT(17)	/* Inverse filtering */
-#define MAC_CONTROL_PR       AR_BIT(18)	/* promiscuous mode (valid frames
-										   only) */
-#define MAC_CONTROL_PM       AR_BIT(19)	/* pass multicast */
-#define MAC_CONTROL_F        AR_BIT(20)	/* full-duplex */
-#define MAC_CONTROL_DRO      AR_BIT(23)	/* Disable Receive Own */
-#define MAC_CONTROL_HBD      AR_BIT(28)	/* heart-beat disabled (MUST BE
-										   SET) */
-#define MAC_CONTROL_BLE      AR_BIT(30)	/* big endian mode */
-#define MAC_CONTROL_RA       AR_BIT(31)	/* receive all (valid and invalid
-										   frames) */
-
-#define MII_ADDR_BUSY        AR_BIT(0)
-#define MII_ADDR_WRITE       AR_BIT(1)
-#define MII_ADDR_REG_SHIFT   6
-#define MII_ADDR_PHY_SHIFT   11
-#define MII_DATA_SHIFT       0
-
-#define FLOW_CONTROL_FCE     AR_BIT(1)
-
-#define DMA_BUS_MODE_SWR       AR_BIT(0)	/* software reset */
-#define DMA_BUS_MODE_BLE       AR_BIT(7)	/* big endian mode */
-#define DMA_BUS_MODE_PBL_SHIFT 8	/* programmable burst length 32 */
-#define DMA_BUS_MODE_DBO       AR_BIT(20)	/* big-endian descriptors */
-
-#define DMA_STATUS_TI        AR_BIT(0)	/* transmit interrupt */
-#define DMA_STATUS_TPS       AR_BIT(1)	/* transmit process stopped */
-#define DMA_STATUS_TU        AR_BIT(2)	/* transmit buffer unavailable */
-#define DMA_STATUS_TJT       AR_BIT(3)	/* transmit buffer timeout */
-#define DMA_STATUS_UNF       AR_BIT(5)	/* transmit underflow */
-#define DMA_STATUS_RI        AR_BIT(6)	/* receive interrupt */
-#define DMA_STATUS_RU        AR_BIT(7)	/* receive buffer unavailable */
-#define DMA_STATUS_RPS       AR_BIT(8)	/* receive process stopped */
-#define DMA_STATUS_ETI       AR_BIT(10)	/* early transmit interrupt */
-#define DMA_STATUS_FBE       AR_BIT(13)	/* fatal bus interrupt */
-#define DMA_STATUS_ERI       AR_BIT(14)	/* early receive interrupt */
-#define DMA_STATUS_AIS       AR_BIT(15)	/* abnormal interrupt summary */
-#define DMA_STATUS_NIS       AR_BIT(16)	/* normal interrupt summary */
-#define DMA_STATUS_RS_SHIFT  17	/* receive process state */
-#define DMA_STATUS_TS_SHIFT  20	/* transmit process state */
-#define DMA_STATUS_EB_SHIFT  23	/* error bits */
-
-#define DMA_CONTROL_SR       AR_BIT(1)	/* start receive */
-#define DMA_CONTROL_ST       AR_BIT(13)	/* start transmit */
-#define DMA_CONTROL_SF       AR_BIT(21)	/* store and forward */
-
-
-typedef struct {
-	volatile unsigned int status;	// OWN, Device control and status.
-	volatile unsigned int devcs;	// pkt Control bits + Length
-	volatile unsigned int addr;	// Current Address.
-	volatile unsigned int descr;	// Next descriptor in chain.
-} ar2313_descr_t;
-
-
-#endif							// __ARUBA_DMA_H__
diff --git a/target/linux/atheros/files-2.6.28/drivers/watchdog/ar2315-wtd.c b/target/linux/atheros/files-2.6.28/drivers/watchdog/ar2315-wtd.c
deleted file mode 100644
index d71b6f6848..0000000000
--- a/target/linux/atheros/files-2.6.28/drivers/watchdog/ar2315-wtd.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * Copyright (C) 2008 John Crispin <blogic@openwrt.org>
- * Based on EP93xx and ifxmips wdt driver
- */
-
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/fs.h>
-#include <linux/ioport.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/addrspace.h>
-#include <ar531x.h>
-
-#define CLOCK_RATE 40000000
-#define HEARTBEAT(x) (x < 1 || x > 90)?(20):(x)
-
-static int wdt_timeout = 20;
-static int started = 0;
-static int in_use = 0;
-
-static void
-ar2315_wdt_enable(void)
-{
-	sysRegWrite(AR5315_WD, wdt_timeout * CLOCK_RATE);
-	sysRegWrite(AR5315_ISR, 0x80);
-}
-
-static ssize_t
-ar2315_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
-{
-	if(len)
-		ar2315_wdt_enable();
-	return len;
-}
-
-static int
-ar2315_wdt_open(struct inode *inode, struct file *file)
-{
-	if(in_use)
-		return -EBUSY;
-	ar2315_wdt_enable();
-	in_use = started = 1;
-	return nonseekable_open(inode, file);
-}
-
-static int
-ar2315_wdt_release(struct inode *inode, struct file *file)
-{
-	in_use = 0;
-	return 0;
-}
-
-static irqreturn_t
-ar2315_wdt_interrupt(int irq, void *dev_id)
-{
-	if(started)
-	{
-		printk(KERN_CRIT "watchdog expired, rebooting system\n");
-		emergency_restart();
-	} else {
-		sysRegWrite(AR5315_WDC, 0);
-		sysRegWrite(AR5315_WD, 0);
-		sysRegWrite(AR5315_ISR, 0x80);
-	}
-	return IRQ_HANDLED;
-}
-
-static struct watchdog_info ident = {
-	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-	.identity = "ar2315 Watchdog",
-};
-
-static int
-ar2315_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-{
-	int new_wdt_timeout;
-	int ret = -ENOIOCTLCMD;
-
-	switch(cmd)
-	{
-		case WDIOC_GETSUPPORT:
-			ret = copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)) ? -EFAULT : 0;
-			break;
-
-		case WDIOC_KEEPALIVE:
-			ar2315_wdt_enable();
-			ret = 0;
-			break;
-
-		case WDIOC_SETTIMEOUT:
-			if((ret = get_user(new_wdt_timeout, (int __user *)arg)))
-				break;
-			wdt_timeout = HEARTBEAT(new_wdt_timeout);
-			ar2315_wdt_enable();
-			break;
-
-		case WDIOC_GETTIMEOUT:
-			ret = put_user(wdt_timeout, (int __user *)arg);
-			break;
-	}
-	return ret;
-}
-
-static struct file_operations ar2315_wdt_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.write		= ar2315_wdt_write,
-	.ioctl		= ar2315_wdt_ioctl,
-	.open		= ar2315_wdt_open,
-	.release	= ar2315_wdt_release,
-};
-
-static struct miscdevice ar2315_wdt_miscdev = {
-	.minor	= WATCHDOG_MINOR,
-	.name	= "watchdog",
-	.fops	= &ar2315_wdt_fops,
-};
-
-static int
-ar2315_wdt_probe(struct platform_device *dev)
-{
-	int ret = 0;
-
-	ar2315_wdt_enable();
-	ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, IRQF_DISABLED, "ar2315_wdt", NULL);
-	if(ret)
-	{
-		printk(KERN_ERR "ar2315wdt: failed to register inetrrupt\n");
-		goto out;
-	}
-
-	ret = misc_register(&ar2315_wdt_miscdev);
-	if(ret)
-		printk(KERN_ERR "ar2315wdt: failed to register miscdev\n");
-
-out:
-	return ret;
-}
-
-static int
-ar2315_wdt_remove(struct platform_device *dev)
-{
-	misc_deregister(&ar2315_wdt_miscdev);
-	free_irq(AR531X_MISC_IRQ_WATCHDOG, NULL);
-	return 0;
-}
-
-static struct platform_driver ar2315_wdt_driver = {
-	.probe = ar2315_wdt_probe,
-	.remove = ar2315_wdt_remove,
-	.driver = {
-		.name = "ar2315_wdt",
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init
-init_ar2315_wdt(void)
-{
-	int ret = platform_driver_register(&ar2315_wdt_driver);
-	if(ret)
-		printk(KERN_INFO "ar2315_wdt: error registering platfom driver!");
-	return ret;
-}
-
-static void __exit
-exit_ar2315_wdt(void)
-{
-	platform_driver_unregister(&ar2315_wdt_driver);
-}
-
-module_init(init_ar2315_wdt);
-module_exit(exit_ar2315_wdt);
diff --git a/target/linux/atheros/patches-2.6.28/901-get_c0_compare_irq_function.patch b/target/linux/atheros/patches-2.6.28/001-get_c0_compare_irq_function.patch
index 9b4331cfdc..934eb5fc4e 100644
--- a/target/linux/atheros/patches-2.6.28/901-get_c0_compare_irq_function.patch
+++ b/target/linux/atheros/patches-2.6.28/001-get_c0_compare_irq_function.patch
@@ -1,3 +1,7 @@
+Allow boards to provide their own function for reading the timer IRQ number
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+
 --- a/arch/mips/kernel/traps.c
 +++ b/arch/mips/kernel/traps.c
 @@ -47,6 +47,7 @@
@@ -27,17 +31,4 @@
  #else
  static inline int mips_clockevent_init(void)
  {
---- a/arch/mips/atheros/board.c
-+++ b/arch/mips/atheros/board.c
-@@ -265,6 +265,11 @@ void (*board_time_init)(void);
- void __init plat_time_init(void) {
-     board_time_init();
- }
-+
-+unsigned int __cpuinit get_c0_compare_irq(void)
-+{
-+	return CP0_LEGACY_COMPARE_IRQ;
-+}
- #endif
- 
- void __init arch_init_irq(void)
+
diff --git a/target/linux/atheros/patches-2.6.28/902-mips_clocksource_init_war.patch b/target/linux/atheros/patches-2.6.28/002-mips_clocksource_init_war.patch
index 03a66ff133..03a66ff133 100644
--- a/target/linux/atheros/patches-2.6.28/902-mips_clocksource_init_war.patch
+++ b/target/linux/atheros/patches-2.6.28/002-mips_clocksource_init_war.patch
diff --git a/target/linux/atheros/patches-2.6.28/100-board.patch b/target/linux/atheros/patches-2.6.28/100-board.patch
index c7f374559f..e4fe7c5c66 100644
--- a/target/linux/atheros/patches-2.6.28/100-board.patch
+++ b/target/linux/atheros/patches-2.6.28/100-board.patch
@@ -1,29 +1,30 @@
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -60,6 +60,18 @@ config BCM47XX
+@@ -60,6 +60,19 @@ config BCM47XX
  	help
  	 Support for BCM47XX based boards
  
 +config ATHEROS
-+	bool "Atheros SoC support (EXPERIMENTAL)"
-+	depends on EXPERIMENTAL
-+	select DMA_NONCOHERENT
++	bool "Atheros 231x/531x SoC support"
 +	select CEVT_R4K
 +	select CSRC_R4K
++	select DMA_NONCOHERENT
 +	select IRQ_CPU
 +	select SYS_HAS_CPU_MIPS32_R1
 +	select SYS_SUPPORTS_BIG_ENDIAN
 +	select SYS_SUPPORTS_32BIT_KERNEL
 +	select GENERIC_GPIO
++	help
++	  Support for AR231x and AR531x based boards
 +
  config MIPS_COBALT
  	bool "Cobalt Server"
  	select CEVT_R4K
-@@ -597,6 +609,7 @@ config WR_PPMC
+@@ -597,6 +610,7 @@ config WR_PPMC
  
  endchoice
  
-+source "arch/mips/atheros/Kconfig"
++source "arch/mips/ar231x/Kconfig"
  source "arch/mips/alchemy/Kconfig"
  source "arch/mips/basler/excite/Kconfig"
  source "arch/mips/emma/Kconfig"
@@ -35,32 +36,3507 @@
  #
 +# Atheros AR5312/AR2312 WiSoC
 +#
-+core-$(CONFIG_ATHEROS)		+= arch/mips/atheros/
-+cflags-$(CONFIG_ATHEROS)	+= -I$(srctree)/arch/mips/include/asm/mach-atheros
++core-$(CONFIG_ATHEROS)		+= arch/mips/ar231x/
++cflags-$(CONFIG_ATHEROS)	+= -I$(srctree)/arch/mips/include/asm/mach-ar231x
 +load-$(CONFIG_ATHEROS)		+= 0xffffffff80041000
 +
 +#
  # Cobalt Server
  #
  core-$(CONFIG_MIPS_COBALT)	+= arch/mips/cobalt/
---- a/arch/mips/include/asm/bootinfo.h
-+++ b/arch/mips/include/asm/bootinfo.h
-@@ -57,6 +57,18 @@
- #define	MACH_MIKROTIK_RB532	0	/* Mikrotik RouterBoard 532 	*/
- #define MACH_MIKROTIK_RB532A	1	/* Mikrotik RouterBoard 532A 	*/
- 
+--- /dev/null
++++ b/arch/mips/ar231x/Kconfig
+@@ -0,0 +1,27 @@
++config ATHEROS_AR5312
++	bool "Atheros 5312/2312+ support"
++	depends on ATHEROS
++	default y
++
++config ATHEROS_AR2315
++	bool "Atheros 2315+ support"
++	depends on ATHEROS
++	select DMA_NONCOHERENT
++	select CEVT_R4K
++	select CSRC_R4K
++	select IRQ_CPU
++	select SYS_HAS_CPU_MIPS32_R1
++	select SYS_SUPPORTS_32BIT_KERNEL
++	select SYS_SUPPORTS_BIG_ENDIAN
++	select GENERIC_GPIO
++	default y
++
++config ATHEROS_AR2315_PCI
++	bool "PCI support"
++	depends on ATHEROS_AR2315
++	select HW_HAS_PCI
++	select PCI
++	select USB_ARCH_HAS_HCD
++	select USB_ARCH_HAS_OHCI
++	select USB_ARCH_HAS_EHCI
++	default y
+--- /dev/null
++++ b/arch/mips/ar231x/Makefile
+@@ -0,0 +1,14 @@
++#
++# This file is subject to the terms and conditions of the GNU General Public
++# License.  See the file "COPYING" in the main directory of this archive
++# for more details.
++#
++# Copyright (C) 2006 FON Technology, SL.
++# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++# Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++#
++
++obj-y += board.o prom.o devices.o
++obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
++obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
++obj-$(CONFIG_ATHEROS_AR2315_PCI) += pci.o
+--- /dev/null
++++ b/arch/mips/ar231x/board.c
+@@ -0,0 +1,247 @@
 +/*
-+ * Valid machtype for group ATHEROS
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
 + */
-+#define MACH_GROUP_ATHEROS	26
-+#define MACH_ATHEROS_AR5312	0
-+#define MACH_ATHEROS_AR2312	1
-+#define MACH_ATHEROS_AR2313	2
-+#define MACH_ATHEROS_AR2315	3
-+#define MACH_ATHEROS_AR2316	4
-+#define MACH_ATHEROS_AR2317	5
-+#define MACH_ATHEROS_AR2318	6
 +
- #define CL_SIZE			COMMAND_LINE_SIZE
- 
- extern char *system_type;
++#include <linux/autoconf.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/string.h>
++#include <linux/platform_device.h>
++#include <linux/kernel.h>
++#include <linux/random.h>
++#include <linux/etherdevice.h>
++#include <asm/irq_cpu.h>
++#include <asm/reboot.h>
++#include <asm/io.h>
++
++#include <ar231x_platform.h>
++#include "devices.h"
++#include "ar5312.h"
++#include "ar2315.h"
++
++void (*ar231x_irq_dispatch)(void);
++
++static inline bool
++check_radio_magic(u8 *addr)
++{
++	addr += 0x7a; /* offset for flash magic */
++	if ((addr[0] == 0x5a) && (addr[1] == 0xa5)) {
++		return 1;
++	}
++	return 0;
++}
++
++static inline bool
++check_board_data(u8 *flash_limit, u8 *addr, bool broken)
++{
++	/* config magic found */
++	if (*((u32 *)addr) == AR531X_BD_MAGIC)
++		return 1;
++
++	if (!broken)
++		return 0;
++
++	if (check_radio_magic(addr + 0xf8))
++		ar231x_board.radio = addr + 0xf8;
++	if ((addr < flash_limit + 0x10000) &&
++	     check_radio_magic(addr + 0x10000))
++		ar231x_board.radio = addr + 0x10000;
++
++	if (ar231x_board.radio) {
++		/* broken board data detected, use radio data to find the offset,
++		 * user will fix this */
++		return 1;
++	}
++	return 0;
++}
++
++static u8 *
++find_board_config(u8 *flash_limit, bool broken)
++{
++	u8 *addr;
++	int found = 0;
++
++	for (addr = flash_limit - 0x1000;
++		addr >= flash_limit - 0x30000;
++		addr -= 0x1000) {
++
++		if (check_board_data(flash_limit, addr, broken)) {
++			found = 1;
++			break;
++		}
++	}
++
++	if (!found)
++		addr = NULL;
++
++	return addr;
++}
++
++static u8 *
++find_radio_config(u8 *flash_limit, u8 *board_config)
++{
++	int found;
++	u8 *radio_config;
++
++	/*
++	 * Now find the start of Radio Configuration data, using heuristics:
++	 * Search forward from Board Configuration data by 0x1000 bytes
++	 * at a time until we find non-0xffffffff.
++	 */
++	found = 0;
++	for (radio_config = board_config + 0x1000;
++	     (radio_config < flash_limit);
++	     radio_config += 0x1000) {
++		if ((*(u32 *)radio_config != 0xffffffff) &&
++		    check_radio_magic(radio_config)) {
++			found = 1;
++			break;
++		}
++	}
++
++	/* AR2316 relocates radio config to new location */
++	if (!found) {
++	    for (radio_config = board_config + 0xf8;
++			(radio_config < flash_limit - 0x1000 + 0xf8);
++			 radio_config += 0x1000) {
++			if ((*(u32 *)radio_config != 0xffffffff) &&
++				check_radio_magic(radio_config)) {
++				found = 1;
++				break;
++			}
++	    }
++	}
++
++	if (!found) {
++		printk("Could not find Radio Configuration data\n");
++		radio_config = 0;
++	}
++
++	return (u8 *) radio_config;
++}
++
++int __init
++ar231x_find_config(u8 *flash_limit)
++{
++	struct ar231x_boarddata *config;
++	unsigned int rcfg_size;
++	int broken_boarddata = 0;
++	u8 *bcfg, *rcfg;
++	u8 *board_data;
++	u8 *radio_data;
++	u32 offset;
++
++	ar231x_board.config = NULL;
++	ar231x_board.radio = NULL;
++	/* Copy the board and radio data to RAM, because accessing the mapped
++	 * memory of the flash directly after booting is not safe */
++
++	/* Try to find valid board and radio data */
++	bcfg = find_board_config(flash_limit, false);
++
++	/* If that fails, try to at least find valid radio data */
++	if (!bcfg) {
++		bcfg = find_board_config(flash_limit, true);
++		broken_boarddata = 1;
++	}
++
++	if (!bcfg) {
++		printk(KERN_WARNING "WARNING: No board configuration data found!\n");
++		return -ENODEV;
++	}
++
++	board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
++	ar231x_board.config = (struct ar231x_boarddata *) board_data;
++	memcpy(board_data, bcfg, 0x100);
++	if (broken_boarddata) {
++		printk(KERN_WARNING "WARNING: broken board data detected\n");
++		config = ar231x_board.config;
++		if (!memcmp(config->enet0_mac, "\x00\x00\x00\x00\x00\x00", 6)) {
++			printk(KERN_INFO "Fixing up empty mac addresses\n");
++			random_ether_addr(config->enet0_mac);
++			random_ether_addr(config->enet1_mac);
++		}
++	}
++
++
++	/* Radio config starts 0x100 bytes after board config, regardless
++	 * of what the physical layout on the flash chip looks like */
++
++	if (ar231x_board.radio)
++		rcfg = (u8 *) ar231x_board.radio;
++	else
++		rcfg = find_radio_config(flash_limit, bcfg);
++
++	if (!rcfg)
++		return -ENODEV;
++
++	radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff);
++	ar231x_board.radio = radio_data;
++	offset = radio_data - board_data;
++	printk(KERN_INFO "Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, offset);
++	rcfg_size = BOARD_CONFIG_BUFSZ - offset;
++	memcpy(radio_data, rcfg, rcfg_size);
++
++	return 0;
++}
++
++static void
++ar231x_halt(void)
++{
++	local_irq_disable();
++	while (1);
++}
++
++void __init
++plat_mem_setup(void)
++{
++	_machine_halt = ar231x_halt;
++	pm_power_off = ar231x_halt;
++
++	ar5312_plat_setup();
++	ar2315_plat_setup();
++
++	/* Disable data watchpoints */
++	write_c0_watchlo0(0);
++}
++
++
++asmlinkage void
++plat_irq_dispatch(void)
++{
++	ar231x_irq_dispatch();
++}
++
++void __init
++plat_time_init(void)
++{
++	ar5312_time_init();
++	ar2315_time_init();
++}
++
++unsigned int __cpuinit
++get_c0_compare_irq(void)
++{
++	return CP0_LEGACY_COMPARE_IRQ;
++}
++
++void __init
++arch_init_irq(void)
++{
++	clear_c0_status(ST0_IM);
++	mips_cpu_irq_init();
++
++	/* Initialize interrupt controllers */
++	ar5312_irq_init();
++	ar2315_irq_init();
++}
++
++
+--- /dev/null
++++ b/arch/mips/ar231x/prom.c
+@@ -0,0 +1,37 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright MontaVista Software Inc
++ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
++ */
++
++/*
++ * Prom setup file for ar531x
++ */
++
++#include <linux/init.h>
++#include <linux/autoconf.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/bootmem.h>
++
++#include <asm/bootinfo.h>
++#include <asm/addrspace.h>
++#include "ar5312.h"
++#include "ar2315.h"
++
++void __init prom_init(void)
++{
++	ar5312_prom_init();
++	ar2315_prom_init();
++}
++
++void __init prom_free_prom_memory(void)
++{
++}
+--- /dev/null
++++ b/arch/mips/ar231x/reset.c
+@@ -0,0 +1,162 @@
++#include <linux/module.h>
++#include <linux/timer.h>
++#include <linux/interrupt.h>
++#include <linux/kobject.h>
++#include <linux/workqueue.h>
++#include <linux/skbuff.h>
++#include <linux/netlink.h>
++#include <net/sock.h>
++#include <asm/uaccess.h>
++#include <ar231x.h>
++
++#define AR531X_RESET_GPIO_IRQ	(AR531X_GPIO_IRQ(bcfg->resetConfigGpio))
++
++struct event_t {
++	struct work_struct wq;
++	int set;
++	unsigned long jiffies;
++};
++
++static struct ar231x_boarddata *bcfg;
++static struct timer_list rst_button_timer;
++
++extern struct sock *uevent_sock;
++extern u64 uevent_next_seqnum(void);
++static unsigned long seen;
++
++static inline void add_msg(struct sk_buff *skb, char *msg)
++{
++	char *scratch;
++	scratch = skb_put(skb, strlen(msg) + 1);
++	sprintf(scratch, msg);
++}
++
++static void hotplug_button(struct work_struct *wq)
++{
++	struct sk_buff *skb;
++	struct event_t *event;
++	size_t len;
++	char *scratch, *s;
++	char buf[128];
++
++	event = container_of(wq, struct event_t, wq);
++	if (!uevent_sock)
++		goto done;
++
++	/* allocate message with the maximum possible size */
++	s = event->set ? "pressed" : "released";
++	len = strlen(s) + 2;
++	skb = alloc_skb(len + 2048, GFP_KERNEL);
++	if (!skb)
++		goto done;
++
++	/* add header */
++	scratch = skb_put(skb, len);
++	sprintf(scratch, "%s@",s);
++
++	/* copy keys to our continuous event payload buffer */
++	add_msg(skb, "HOME=/");
++	add_msg(skb, "PATH=/sbin:/bin:/usr/sbin:/usr/bin");
++	add_msg(skb, "SUBSYSTEM=button");
++	add_msg(skb, "BUTTON=reset");
++	add_msg(skb, (event->set ? "ACTION=pressed" : "ACTION=released"));
++	sprintf(buf, "SEEN=%ld", (event->jiffies - seen)/HZ);
++	add_msg(skb, buf);
++	snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum());
++	add_msg(skb, buf);
++
++	NETLINK_CB(skb).dst_group = 1;
++	netlink_broadcast(uevent_sock, skb, 0, 1, GFP_KERNEL);
++
++done:
++	kfree(event);
++}
++
++static int no_release_workaround = 1;
++
++static void
++reset_button_poll(unsigned long unused)
++{
++	struct event_t *event;
++	int gpio = ~0;
++
++	if(!no_release_workaround)
++		return;
++
++	DO_AR2315(gpio = sysRegRead(AR2315_GPIO_DI);)
++    gpio &= 1 << (AR531X_RESET_GPIO_IRQ - AR531X_GPIO_IRQ_BASE);
++	if(gpio)
++	{
++		rst_button_timer.expires = jiffies + (HZ / 4);
++		add_timer(&rst_button_timer);
++	} else {
++		event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
++		if (!event)
++		{
++			printk("Could not alloc hotplug event\n");
++			return;
++		}
++		event->set = 0;
++		event->jiffies = jiffies;
++		INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
++		schedule_work(&event->wq);
++	}
++}
++
++static irqreturn_t button_handler(int irq, void *dev_id)
++{
++	static int pressed = 0;
++	struct event_t *event;
++	u32 gpio = ~0;
++
++	event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
++	if (!event)
++		return IRQ_NONE;
++
++	pressed = !pressed;
++
++	DO_AR2315(gpio = sysRegRead(AR2315_GPIO_DI);)
++	gpio &= 1 << (irq - AR531X_GPIO_IRQ_BASE);
++
++	event->set = gpio;
++	if(!event->set)
++		no_release_workaround = 0;
++
++	event->jiffies = jiffies;
++
++	INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
++	schedule_work(&event->wq);
++
++	seen = jiffies;
++	if(event->set && no_release_workaround)
++		mod_timer(&rst_button_timer, jiffies + (HZ / 4));
++
++	return IRQ_HANDLED;
++}
++
++void ar231x_disable_reset_button(void)
++{
++	disable_irq(AR531X_RESET_GPIO_IRQ);
++}
++
++EXPORT_SYMBOL(ar231x_disable_reset_button);
++
++int __init ar231x_init_reset(void)
++{
++	bcfg = (struct ar231x_boarddata *) board_config;
++
++	seen = jiffies;
++
++	init_timer(&rst_button_timer);
++	rst_button_timer.function = reset_button_poll;
++	rst_button_timer.expires = jiffies + HZ / 50;
++	add_timer(&rst_button_timer);
++
++	request_irq(AR531X_RESET_GPIO_IRQ, &button_handler, IRQF_SAMPLE_RANDOM, "ar231x_reset", NULL);
++
++	return 0;
++}
++
++
++
++module_init(ar231x_init_reset);
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/ar231x_platform.h
+@@ -0,0 +1,83 @@
++#ifndef __AR531X_PLATFORM_H
++#define __AR531X_PLATFORM_H
++
++/*
++ * This is board-specific data that is stored in a "fixed" location in flash.
++ * It is shared across operating systems, so it should not be changed lightly.
++ * The main reason we need it is in order to extract the ethernet MAC
++ * address(es).
++ */
++struct ar231x_boarddata {
++    u32 magic;                       /* board data is valid */
++#define AR531X_BD_MAGIC 0x35333131   /* "5311", for all 531x platforms */
++    u16 cksum;                       /* checksum (starting with BD_REV 2) */
++    u16 rev;                         /* revision of this struct */
++#define BD_REV  4
++    char boardName[64];            /* Name of board */
++    u16 major;                       /* Board major number */
++    u16 minor;                       /* Board minor number */
++    u32 flags;                      /* Board configuration */
++#define BD_ENET0        0x00000001   /* ENET0 is stuffed */
++#define BD_ENET1        0x00000002   /* ENET1 is stuffed */
++#define BD_UART1        0x00000004   /* UART1 is stuffed */
++#define BD_UART0        0x00000008   /* UART0 is stuffed (dma) */
++#define BD_RSTFACTORY   0x00000010   /* Reset factory defaults stuffed */
++#define BD_SYSLED       0x00000020   /* System LED stuffed */
++#define BD_EXTUARTCLK   0x00000040   /* External UART clock */
++#define BD_CPUFREQ      0x00000080   /* cpu freq is valid in nvram */
++#define BD_SYSFREQ      0x00000100   /* sys freq is set in nvram */
++#define BD_WLAN0        0x00000200   /* Enable WLAN0 */
++#define BD_MEMCAP       0x00000400   /* CAP SDRAM @ memCap for testing */
++#define BD_DISWATCHDOG  0x00000800   /* disable system watchdog */
++#define BD_WLAN1        0x00001000   /* Enable WLAN1 (ar5212) */
++#define BD_ISCASPER     0x00002000   /* FLAG for AR2312 */
++#define BD_WLAN0_2G_EN  0x00004000   /* FLAG for radio0_2G */
++#define BD_WLAN0_5G_EN  0x00008000   /* FLAG for radio0_2G */
++#define BD_WLAN1_2G_EN  0x00020000   /* FLAG for radio0_2G */
++#define BD_WLAN1_5G_EN  0x00040000   /* FLAG for radio0_2G */
++    u16 resetConfigGpio;             /* Reset factory GPIO pin */
++    u16 sysLedGpio;                  /* System LED GPIO pin */
++
++    u32 cpuFreq;                     /* CPU core frequency in Hz */
++    u32 sysFreq;                     /* System frequency in Hz */
++    u32 cntFreq;                     /* Calculated C0_COUNT frequency */
++
++    u8  wlan0_mac[6];
++    u8  enet0_mac[6];
++    u8  enet1_mac[6];
++
++    u16 pciId;                       /* Pseudo PCIID for common code */
++    u16 memCap;                      /* cap bank1 in MB */
++
++    /* version 3 */
++    u8  wlan1_mac[6];                 /* (ar5212) */
++};
++
++#define BOARD_CONFIG_BUFSZ		0x1000
++
++/*
++ * Platform device information for the Wireless MAC
++ */
++struct ar231x_board_config {
++	u16 devid;
++
++	/* board config data */
++	struct ar231x_boarddata *config;
++
++	/* radio calibration data */
++	const char *radio;
++};
++
++/*
++ * Platform device information for the Ethernet MAC
++ */
++struct ar231x_eth {
++	u32 reset_base;
++	u32 reset_mac;
++	u32 reset_phy;
++	u32 phy_base;
++	struct ar231x_board_config *config;
++	char *macaddr;
++};
++
++#endif /* __AR531X_PLATFORM_H */
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/cpu-feature-overrides.h
+@@ -0,0 +1,84 @@
++/*
++ *  Atheros SoC specific CPU feature overrides
++ *
++ *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This file was derived from: include/asm-mips/cpu-features.h
++ *	Copyright (C) 2003, 2004 Ralf Baechle
++ *	Copyright (C) 2004 Maciej W. Rozycki
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ */
++#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
++#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
++
++/*
++ * The ATHEROS SoCs have MIPS 4Kc/4KEc core.
++ */
++#define cpu_has_tlb			1
++#define cpu_has_4kex			1
++#define cpu_has_3k_cache		0
++#define cpu_has_4k_cache		1
++#define cpu_has_tx39_cache		0
++#define cpu_has_sb1_cache		0
++#define cpu_has_fpu			0
++#define cpu_has_32fpr			0
++#define cpu_has_counter			1
++/* #define cpu_has_watch		? */
++/* #define cpu_has_divec		? */
++/* #define cpu_has_vce			? */
++/* #define cpu_has_cache_cdex_p		? */
++/* #define cpu_has_cache_cdex_s		? */
++/* #define cpu_has_prefetch		? */
++/* #define cpu_has_mcheck		? */
++#define cpu_has_ejtag			1
++
++#if !defined(CONFIG_ATHEROS_AR5312)
++#  define cpu_has_llsc			1
++#else
++/*
++ * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the
++ * ll/sc instructions.
++ */
++#  define cpu_has_llsc			0
++#endif
++
++#define cpu_has_mips16			0
++#define cpu_has_mdmx			0
++#define cpu_has_mips3d			0
++#define cpu_has_smartmips		0
++
++/* #define cpu_has_vtag_icache		? */
++/* #define cpu_has_dc_aliases		? */
++/* #define cpu_has_ic_fills_f_dc	? */
++/* #define cpu_has_pindexed_dcache	? */
++
++/* #define cpu_icache_snoops_remote_store	? */
++
++#define cpu_has_mips32r1		1
++
++#if !defined(CONFIG_ATHEROS_AR5312)
++#  define cpu_has_mips32r2		1
++#endif
++
++#define cpu_has_mips64r1		0
++#define cpu_has_mips64r2		0
++
++#define cpu_has_dsp			0
++#define cpu_has_mipsmt			0
++
++/* #define cpu_has_nofpuex		? */
++#define cpu_has_64bits			0
++#define cpu_has_64bit_zero_reg		0
++#define cpu_has_64bit_gp_regs		0
++#define cpu_has_64bit_addresses		0
++
++/* #define cpu_has_inclusive_pcaches	? */
++
++/* #define cpu_dcache_line_size()	? */
++/* #define cpu_icache_line_size()	? */
++
++#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/dma-coherence.h
+@@ -0,0 +1,41 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
++ * Copyright (C) 2007  Felix Fietkau <nbd@openwrt.org>
++ *
++ */
++#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
++#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
++
++#define PCI_DMA_OFFSET	0x20000000
++
++struct device;
++
++static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
++{
++	return virt_to_phys(addr) + (dev != NULL ? PCI_DMA_OFFSET : 0);
++}
++
++static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
++{
++	return page_to_phys(page) + (dev != NULL ? PCI_DMA_OFFSET : 0);
++}
++
++static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
++{
++	return (dma_addr > PCI_DMA_OFFSET ? dma_addr - PCI_DMA_OFFSET : dma_addr);
++}
++
++static void plat_unmap_dma_mem(dma_addr_t dma_addr)
++{
++}
++
++static inline int plat_device_is_coherent(struct device *dev)
++{
++	return 0;
++}
++
++#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/gpio.h
+@@ -0,0 +1,79 @@
++#ifndef _ATHEROS_GPIO_H_
++#define _ATHEROS_GPIO_H_
++
++#include <ar231x.h>
++
++struct ar231x_gpiodev {
++	u32 valid_mask;
++	u32 (*get_output)(void);
++	u32 (*set_output)(u32 mask, u32 val);
++	u32 (*get)(void);
++	u32 (*set)(u32 mask, u32 val);
++};
++
++extern const struct ar231x_gpiodev *ar231x_gpiodev;
++
++/*
++ * Wrappers for the generic GPIO layer
++ */
++
++static inline int gpio_direction_input(unsigned gpio) {
++	u32 mask = 1 << gpio;
++
++	if (!(ar231x_gpiodev->valid_mask & mask))
++		return -ENXIO;
++
++	ar231x_gpiodev->set_output(mask, 0);
++	return 0;
++}
++
++static inline void gpio_set_value(unsigned gpio, int value) {
++	u32 mask = 1 << gpio;
++
++	if (!(ar231x_gpiodev->valid_mask & mask))
++		return;
++
++	ar231x_gpiodev->set(mask, (!!value) * mask);
++}
++
++static inline int gpio_direction_output(unsigned gpio, int value) {
++	u32 mask = 1 << gpio;
++
++	if (!(ar231x_gpiodev->valid_mask & mask))
++		return -ENXIO;
++
++	ar231x_gpiodev->set_output(mask, mask);
++	ar231x_gpiodev->set(mask, (!!value) * mask);
++	return 0;
++}
++
++/* Reads the gpio pin.  Unchecked function */
++static inline int gpio_get_value(unsigned gpio) {
++	u32 mask = 1 << gpio;
++
++	if (!(ar231x_gpiodev->valid_mask & mask))
++		return 0;
++
++	return !!(ar231x_gpiodev->get() & mask);
++}
++
++static inline int gpio_request(unsigned gpio, const char *label) {
++	return 0;
++}
++
++static inline void gpio_free(unsigned gpio) {
++}
++
++/* Returns IRQ to attach for gpio.  Unchecked function */
++static inline int gpio_to_irq(unsigned gpio) {
++	return AR531X_GPIO_IRQ(gpio);
++}
++
++/* Returns gpio for IRQ attached.  Unchecked function */
++static inline int irq_to_gpio(unsigned irq) {
++	return (irq - (AR531X_GPIO_IRQ(0)));
++}
++
++#include <asm-generic/gpio.h> /* cansleep wrappers */
++
++#endif
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/reset.h
+@@ -0,0 +1,6 @@
++#ifndef __AR531X_RESET_H
++#define __AR531X_RESET_H
++
++void ar531x_disable_reset_button(void);
++
++#endif /* __AR531X_RESET_H */
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/war.h
+@@ -0,0 +1,25 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
++ */
++#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H
++#define __ASM_MIPS_MACH_ATHEROS_WAR_H
++
++#define R4600_V1_INDEX_ICACHEOP_WAR	0
++#define R4600_V1_HIT_CACHEOP_WAR	0
++#define R4600_V2_HIT_CACHEOP_WAR	0
++#define R5432_CP0_INTERRUPT_WAR		0
++#define BCM1250_M3_WAR			0
++#define SIBYTE_1956_WAR			0
++#define MIPS4K_ICACHE_REFILL_WAR	0
++#define MIPS_CACHE_SYNC_WAR		0
++#define TX49XX_ICACHE_INDEX_INV_WAR	0
++#define RM9000_CDEX_SMP_WAR		0
++#define ICACHE_REFILLS_WORKAROUND_WAR	0
++#define R10000_LLSC_WAR			0
++#define MIPS34K_MISSED_ITLB_WAR		0
++
++#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/ar2315_regs.h
+@@ -0,0 +1,580 @@
++/*
++ * Register definitions for AR2315+
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2008 Felix Fietkau <nbd@openwrt.org>
++ */
++
++#ifndef __AR2315_REG_H
++#define __AR2315_REG_H
++
++/*
++ * IRQs
++ */
++#define AR2315_IRQ_MISC_INTRS   MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
++#define AR2315_IRQ_WLAN0_INTRS  MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
++#define AR2315_IRQ_ENET0_INTRS  MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
++#define AR2315_IRQ_LCBUS_PCI    MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
++#define AR2315_IRQ_WLAN0_POLL   MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
++
++/*
++ * Address map
++ */
++#define AR2315_SPI_READ         0x08000000      /* SPI FLASH */
++#define AR2315_WLAN0            0xB0000000      /* Wireless MMR */
++#define AR2315_PCI              0xB0100000      /* PCI MMR */
++#define AR2315_SDRAMCTL         0xB0300000      /* SDRAM MMR */
++#define AR2315_LOCAL            0xB0400000      /* LOCAL BUS MMR */
++#define AR2315_ENET0            0xB0500000      /* ETHERNET MMR */
++#define AR2315_DSLBASE          0xB1000000      /* RESET CONTROL MMR */
++#define AR2315_UART0            0xB1100003      /* UART MMR */
++#define AR2315_SPI              0xB1300000      /* SPI FLASH MMR */
++#define AR2315_PCIEXT           0x80000000      /* pci external */
++
++/*
++ * Reset Register
++ */
++#define AR2315_COLD_RESET       (AR2315_DSLBASE + 0x0000)
++
++#define AR2315_RESET_COLD_AHB              0x00000001
++#define AR2315_RESET_COLD_APB              0x00000002
++#define AR2315_RESET_COLD_CPU              0x00000004
++#define AR2315_RESET_COLD_CPUWARM          0x00000008
++#define AR2315_RESET_SYSTEM                (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB)      /* full system */
++#define AR2317_RESET_SYSTEM                0x00000010
++
++
++#define AR2315_RESET            (AR2315_DSLBASE + 0x0004)
++
++#define AR2315_RESET_WARM_WLAN0_MAC        0x00000001      /* warm reset WLAN0 MAC */
++#define AR2315_RESET_WARM_WLAN0_BB         0x00000002      /* warm reset WLAN0 BaseBand */
++#define AR2315_RESET_MPEGTS_RSVD           0x00000004      /* warm reset MPEG-TS */
++#define AR2315_RESET_PCIDMA                0x00000008      /* warm reset PCI ahb/dma */
++#define AR2315_RESET_MEMCTL                0x00000010      /* warm reset memory controller */
++#define AR2315_RESET_LOCAL                 0x00000020      /* warm reset local bus */
++#define AR2315_RESET_I2C_RSVD              0x00000040      /* warm reset I2C bus */
++#define AR2315_RESET_SPI                   0x00000080      /* warm reset SPI interface */
++#define AR2315_RESET_UART0                 0x00000100      /* warm reset UART0 */
++#define AR2315_RESET_IR_RSVD               0x00000200      /* warm reset IR interface */
++#define AR2315_RESET_EPHY0                 0x00000400      /* cold reset ENET0 phy */
++#define AR2315_RESET_ENET0                 0x00000800      /* cold reset ENET0 mac */
++
++/*
++ * AHB master arbitration control
++ */
++#define AR2315_AHB_ARB_CTL      (AR2315_DSLBASE + 0x0008)
++
++#define AR2315_ARB_CPU                     0x00000001      /* CPU, default */
++#define AR2315_ARB_WLAN                    0x00000002      /* WLAN */
++#define AR2315_ARB_MPEGTS_RSVD             0x00000004      /* MPEG-TS */
++#define AR2315_ARB_LOCAL                   0x00000008      /* LOCAL */
++#define AR2315_ARB_PCI                     0x00000010      /* PCI */
++#define AR2315_ARB_ETHERNET                0x00000020      /* Ethernet */
++#define AR2315_ARB_RETRY                   0x00000100      /* retry policy, debug only */
++
++/*
++ * Config Register
++ */
++#define AR2315_ENDIAN_CTL       (AR2315_DSLBASE + 0x000c)
++
++#define AR2315_CONFIG_AHB                  0x00000001      /* EC - AHB bridge endianess */
++#define AR2315_CONFIG_WLAN                 0x00000002      /* WLAN byteswap */
++#define AR2315_CONFIG_MPEGTS_RSVD          0x00000004      /* MPEG-TS byteswap */
++#define AR2315_CONFIG_PCI                  0x00000008      /* PCI byteswap */
++#define AR2315_CONFIG_MEMCTL               0x00000010      /* Memory controller endianess */
++#define AR2315_CONFIG_LOCAL                0x00000020      /* Local bus byteswap */
++#define AR2315_CONFIG_ETHERNET             0x00000040      /* Ethernet byteswap */
++
++#define AR2315_CONFIG_MERGE                0x00000200      /* CPU write buffer merge */
++#define AR2315_CONFIG_CPU                  0x00000400      /* CPU big endian */
++#define AR2315_CONFIG_PCIAHB               0x00000800
++#define AR2315_CONFIG_PCIAHB_BRIDGE        0x00001000
++#define AR2315_CONFIG_SPI                  0x00008000      /* SPI byteswap */
++#define AR2315_CONFIG_CPU_DRAM             0x00010000
++#define AR2315_CONFIG_CPU_PCI              0x00020000
++#define AR2315_CONFIG_CPU_MMR              0x00040000
++#define AR2315_CONFIG_BIG                  0x00000400
++
++
++/*
++ * NMI control
++ */
++#define AR2315_NMI_CTL          (AR2315_DSLBASE + 0x0010)
++
++#define AR2315_NMI_EN  1
++
++/*
++ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
++ */
++#define AR2315_SREV             (AR2315_DSLBASE + 0x0014)
++
++#define AR2315_REV_MAJ                     0x00f0
++#define AR2315_REV_MAJ_S                   4
++#define AR2315_REV_MIN                     0x000f
++#define AR2315_REV_MIN_S                   0
++#define AR2315_REV_CHIP                    (AR2315_REV_MAJ|AR2315_REV_MIN)
++
++/*
++ * Interface Enable
++ */
++#define AR2315_IF_CTL           (AR2315_DSLBASE + 0x0018)
++
++#define AR2315_IF_MASK                     0x00000007
++#define AR2315_IF_DISABLED                 0
++#define AR2315_IF_PCI                      1
++#define AR2315_IF_TS_LOCAL                 2
++#define AR2315_IF_ALL                      3   /* only for emulation with separate pins */
++#define AR2315_IF_LOCAL_HOST               0x00000008
++#define AR2315_IF_PCI_HOST                 0x00000010
++#define AR2315_IF_PCI_INTR                 0x00000020
++#define AR2315_IF_PCI_CLK_MASK             0x00030000
++#define AR2315_IF_PCI_CLK_INPUT            0
++#define AR2315_IF_PCI_CLK_OUTPUT_LOW       1
++#define AR2315_IF_PCI_CLK_OUTPUT_CLK       2
++#define AR2315_IF_PCI_CLK_OUTPUT_HIGH      3
++#define AR2315_IF_PCI_CLK_SHIFT            16
++
++/*
++ * APB Interrupt control
++ */
++
++#define AR2315_ISR              (AR2315_DSLBASE + 0x0020)
++#define AR2315_IMR              (AR2315_DSLBASE + 0x0024)
++#define AR2315_GISR             (AR2315_DSLBASE + 0x0028)
++
++#define AR2315_ISR_UART0                   0x0001           /* high speed UART */
++#define AR2315_ISR_I2C_RSVD                0x0002           /* I2C bus */
++#define AR2315_ISR_SPI                     0x0004           /* SPI bus */
++#define AR2315_ISR_AHB                     0x0008           /* AHB error */
++#define AR2315_ISR_APB                     0x0010           /* APB error */
++#define AR2315_ISR_TIMER                   0x0020           /* timer */
++#define AR2315_ISR_GPIO                    0x0040           /* GPIO */
++#define AR2315_ISR_WD                      0x0080           /* watchdog */
++#define AR2315_ISR_IR_RSVD                 0x0100           /* IR */
++
++#define AR2315_GISR_MISC                   0x0001
++#define AR2315_GISR_WLAN0                  0x0002
++#define AR2315_GISR_MPEGTS_RSVD            0x0004
++#define AR2315_GISR_LOCALPCI               0x0008
++#define AR2315_GISR_WMACPOLL               0x0010
++#define AR2315_GISR_TIMER                  0x0020
++#define AR2315_GISR_ETHERNET               0x0040
++
++/*
++ * Interrupt routing from IO to the processor IP bits
++ * Define our inter mask and level
++ */
++#define AR2315_INTR_MISCIO      SR_IBIT3
++#define AR2315_INTR_WLAN0       SR_IBIT4
++#define AR2315_INTR_ENET0       SR_IBIT5
++#define AR2315_INTR_LOCALPCI    SR_IBIT6
++#define AR2315_INTR_WMACPOLL    SR_IBIT7
++#define AR2315_INTR_COMPARE     SR_IBIT8
++
++/*
++ * Timers
++ */
++#define AR2315_TIMER            (AR2315_DSLBASE + 0x0030)
++#define AR2315_RELOAD           (AR2315_DSLBASE + 0x0034)
++#define AR2315_WD               (AR2315_DSLBASE + 0x0038)
++#define AR2315_WDC              (AR2315_DSLBASE + 0x003c)
++
++#define AR2315_WDC_IGNORE_EXPIRATION       0x00000000
++#define AR2315_WDC_NMI                     0x00000001               /* NMI on watchdog */
++#define AR2315_WDC_RESET                   0x00000002               /* reset on watchdog */
++
++/*
++ * CPU Performance Counters
++ */
++#define AR2315_PERFCNT0         (AR2315_DSLBASE + 0x0048)
++#define AR2315_PERFCNT1         (AR2315_DSLBASE + 0x004c)
++
++#define AR2315_PERF0_DATAHIT                0x0001  /* Count Data Cache Hits */
++#define AR2315_PERF0_DATAMISS               0x0002  /* Count Data Cache Misses */
++#define AR2315_PERF0_INSTHIT                0x0004  /* Count Instruction Cache Hits */
++#define AR2315_PERF0_INSTMISS               0x0008  /* Count Instruction Cache Misses */
++#define AR2315_PERF0_ACTIVE                 0x0010  /* Count Active Processor Cycles */
++#define AR2315_PERF0_WBHIT                  0x0020  /* Count CPU Write Buffer Hits */
++#define AR2315_PERF0_WBMISS                 0x0040  /* Count CPU Write Buffer Misses */
++
++#define AR2315_PERF1_EB_ARDY                0x0001  /* Count EB_ARdy signal */
++#define AR2315_PERF1_EB_AVALID              0x0002  /* Count EB_AValid signal */
++#define AR2315_PERF1_EB_WDRDY               0x0004  /* Count EB_WDRdy signal */
++#define AR2315_PERF1_EB_RDVAL               0x0008  /* Count EB_RdVal signal */
++#define AR2315_PERF1_VRADDR                 0x0010  /* Count valid read address cycles */
++#define AR2315_PERF1_VWADDR                 0x0020  /* Count valid write address cycles */
++#define AR2315_PERF1_VWDATA                 0x0040  /* Count valid write data cycles */
++
++/*
++ * AHB Error Reporting.
++ */
++#define AR2315_AHB_ERR0         (AR2315_DSLBASE + 0x0050)  /* error  */
++#define AR2315_AHB_ERR1         (AR2315_DSLBASE + 0x0054)  /* haddr  */
++#define AR2315_AHB_ERR2         (AR2315_DSLBASE + 0x0058)  /* hwdata */
++#define AR2315_AHB_ERR3         (AR2315_DSLBASE + 0x005c)  /* hrdata */
++#define AR2315_AHB_ERR4         (AR2315_DSLBASE + 0x0060)  /* status */
++
++#define AHB_ERROR_DET               1   /* AHB Error has been detected,          */
++                                        /* write 1 to clear all bits in ERR0     */
++#define AHB_ERROR_OVR               2   /* AHB Error overflow has been detected  */
++#define AHB_ERROR_WDT               4   /* AHB Error due to wdt instead of hresp */
++
++#define AR2315_PROCERR_HMAST               0x0000000f
++#define AR2315_PROCERR_HMAST_DFLT          0
++#define AR2315_PROCERR_HMAST_WMAC          1
++#define AR2315_PROCERR_HMAST_ENET          2
++#define AR2315_PROCERR_HMAST_PCIENDPT      3
++#define AR2315_PROCERR_HMAST_LOCAL         4
++#define AR2315_PROCERR_HMAST_CPU           5
++#define AR2315_PROCERR_HMAST_PCITGT        6
++
++#define AR2315_PROCERR_HMAST_S             0
++#define AR2315_PROCERR_HWRITE              0x00000010
++#define AR2315_PROCERR_HSIZE               0x00000060
++#define AR2315_PROCERR_HSIZE_S             5
++#define AR2315_PROCERR_HTRANS              0x00000180
++#define AR2315_PROCERR_HTRANS_S            7
++#define AR2315_PROCERR_HBURST              0x00000e00
++#define AR2315_PROCERR_HBURST_S            9
++
++/*
++ * Clock Control
++ */
++#define AR2315_PLLC_CTL         (AR2315_DSLBASE + 0x0064)
++#define AR2315_PLLV_CTL         (AR2315_DSLBASE + 0x0068)
++#define AR2315_CPUCLK           (AR2315_DSLBASE + 0x006c)
++#define AR2315_AMBACLK          (AR2315_DSLBASE + 0x0070)
++#define AR2315_SYNCCLK          (AR2315_DSLBASE + 0x0074)
++#define AR2315_DSL_SLEEP_CTL    (AR2315_DSLBASE + 0x0080)
++#define AR2315_DSL_SLEEP_DUR    (AR2315_DSLBASE + 0x0084)
++
++/* PLLc Control fields */
++#define PLLC_REF_DIV_M              0x00000003
++#define PLLC_REF_DIV_S              0
++#define PLLC_FDBACK_DIV_M           0x0000007C
++#define PLLC_FDBACK_DIV_S           2
++#define PLLC_ADD_FDBACK_DIV_M       0x00000080
++#define PLLC_ADD_FDBACK_DIV_S       7
++#define PLLC_CLKC_DIV_M             0x0001c000
++#define PLLC_CLKC_DIV_S             14
++#define PLLC_CLKM_DIV_M             0x00700000
++#define PLLC_CLKM_DIV_S             20
++
++/* CPU CLK Control fields */
++#define CPUCLK_CLK_SEL_M            0x00000003
++#define CPUCLK_CLK_SEL_S            0
++#define CPUCLK_CLK_DIV_M            0x0000000c
++#define CPUCLK_CLK_DIV_S            2
++
++/* AMBA CLK Control fields */
++#define AMBACLK_CLK_SEL_M           0x00000003
++#define AMBACLK_CLK_SEL_S           0
++#define AMBACLK_CLK_DIV_M           0x0000000c
++#define AMBACLK_CLK_DIV_S           2
++
++/*
++ * GPIO
++ */
++#define AR2315_GPIO_DI          (AR2315_DSLBASE + 0x0088)
++#define AR2315_GPIO_DO          (AR2315_DSLBASE + 0x0090)
++#define AR2315_GPIO_CR          (AR2315_DSLBASE + 0x0098)
++#define AR2315_GPIO_INT         (AR2315_DSLBASE + 0x00a0)
++
++#define AR2315_GPIO_CR_M(x)                (1 << (x))                  /* mask for i/o */
++#define AR2315_GPIO_CR_O(x)                (1 << (x))                  /* output */
++#define AR2315_GPIO_CR_I(x)                (0)                         /* input */
++
++#define AR2315_GPIO_INT_S(x)               (x)                         /* interrupt enable */
++#define AR2315_GPIO_INT_M                  (0x3F)                      /* mask for int */
++#define AR2315_GPIO_INT_LVL(x)             ((x) << 6)                  /* interrupt level */
++#define AR2315_GPIO_INT_LVL_M              ((0x3) << 6)                /* mask for int level */
++
++#define AR2315_GPIO_INT_MAX_Y				1   /* Maximum value of Y for AR5313_GPIO_INT_* macros */
++#define AR2315_GPIO_INT_LVL_OFF				0   /* Triggerring off */
++#define AR2315_GPIO_INT_LVL_LOW				1   /* Low Level Triggered */
++#define AR2315_GPIO_INT_LVL_HIGH			2   /* High Level Triggered */
++#define AR2315_GPIO_INT_LVL_EDGE			3   /* Edge Triggered */
++
++#define AR2315_RESET_GPIO       5
++#define AR2315_NUM_GPIO         22
++
++/*
++ *  PCI Clock Control
++ */
++#define AR2315_PCICLK           (AR2315_DSLBASE + 0x00a4)
++
++#define AR2315_PCICLK_INPUT_M              0x3
++#define AR2315_PCICLK_INPUT_S              0
++
++#define AR2315_PCICLK_PLLC_CLKM            0
++#define AR2315_PCICLK_PLLC_CLKM1           1
++#define AR2315_PCICLK_PLLC_CLKC            2
++#define AR2315_PCICLK_REF_CLK              3
++
++#define AR2315_PCICLK_DIV_M                0xc
++#define AR2315_PCICLK_DIV_S                2
++
++#define AR2315_PCICLK_IN_FREQ              0
++#define AR2315_PCICLK_IN_FREQ_DIV_6        1
++#define AR2315_PCICLK_IN_FREQ_DIV_8        2
++#define AR2315_PCICLK_IN_FREQ_DIV_10       3
++
++/*
++ * Observation Control Register
++ */
++#define AR2315_OCR              (AR2315_DSLBASE + 0x00b0)
++#define OCR_GPIO0_IRIN              0x0040
++#define OCR_GPIO1_IROUT             0x0080
++#define OCR_GPIO3_RXCLR             0x0200
++
++/*
++ *  General Clock Control
++ */
++
++#define AR2315_MISCCLK          (AR2315_DSLBASE + 0x00b4)
++#define MISCCLK_PLLBYPASS_EN        0x00000001
++#define MISCCLK_PROCREFCLK          0x00000002
++
++/*
++ * SDRAM Controller
++ *   - No read or write buffers are included.
++ */
++#define AR2315_MEM_CFG          (AR2315_SDRAMCTL + 0x00)
++#define AR2315_MEM_CTRL         (AR2315_SDRAMCTL + 0x0c)
++#define AR2315_MEM_REF          (AR2315_SDRAMCTL + 0x10)
++
++#define SDRAM_DATA_WIDTH_M          0x00006000
++#define SDRAM_DATA_WIDTH_S          13
++
++#define SDRAM_COL_WIDTH_M           0x00001E00
++#define SDRAM_COL_WIDTH_S           9
++
++#define SDRAM_ROW_WIDTH_M           0x000001E0
++#define SDRAM_ROW_WIDTH_S           5
++
++#define SDRAM_BANKADDR_BITS_M       0x00000018
++#define SDRAM_BANKADDR_BITS_S       3
++
++/*
++ * SPI Flash Interface Registers
++ */
++
++#define AR2315_SPI_CTL      (AR2315_SPI + 0x00)
++#define AR2315_SPI_OPCODE   (AR2315_SPI + 0x04)
++#define AR2315_SPI_DATA     (AR2315_SPI + 0x08)
++
++#define SPI_CTL_START           0x00000100
++#define SPI_CTL_BUSY            0x00010000
++#define SPI_CTL_TXCNT_MASK      0x0000000f
++#define SPI_CTL_RXCNT_MASK      0x000000f0
++#define SPI_CTL_TX_RX_CNT_MASK  0x000000ff
++#define SPI_CTL_SIZE_MASK       0x00060000
++
++#define SPI_CTL_CLK_SEL_MASK    0x03000000
++#define SPI_OPCODE_MASK         0x000000ff
++
++/*
++ * PCI Bus Interface Registers
++ */
++#define AR2315_PCI_1MS_REG      (AR2315_PCI + 0x0008)
++#define AR2315_PCI_1MS_MASK     0x3FFFF         /* # of AHB clk cycles in 1ms */
++
++#define AR2315_PCI_MISC_CONFIG  (AR2315_PCI + 0x000c)
++#define AR2315_PCIMISC_TXD_EN   0x00000001      /* Enable TXD for fragments */
++#define AR2315_PCIMISC_CFG_SEL  0x00000002      /* mem or config cycles */
++#define AR2315_PCIMISC_GIG_MASK 0x0000000C      /* bits 31-30 for pci req */
++#define AR2315_PCIMISC_RST_MODE 0x00000030
++#define AR2315_PCIRST_INPUT     0x00000000      /* 4:5=0 rst is input */
++#define AR2315_PCIRST_LOW       0x00000010      /* 4:5=1 rst to GND */
++#define AR2315_PCIRST_HIGH      0x00000020      /* 4:5=2 rst to VDD */
++#define AR2315_PCIGRANT_EN      0x00000000      /* 6:7=0 early grant en */
++#define AR2315_PCIGRANT_FRAME   0x00000040      /* 6:7=1 grant waits 4 frame */
++#define AR2315_PCIGRANT_IDLE    0x00000080      /* 6:7=2 grant waits 4 idle */
++#define AR2315_PCIGRANT_GAP     0x00000000      /* 6:7=2 grant waits 4 idle */
++#define AR2315_PCICACHE_DIS     0x00001000      /* PCI external access cache disable */
++
++#define AR2315_PCI_OUT_TSTAMP   (AR2315_PCI + 0x0010)
++
++#define AR2315_PCI_UNCACHE_CFG  (AR2315_PCI + 0x0014)
++
++#define AR2315_PCI_IN_EN        (AR2315_PCI + 0x0100)
++#define AR2315_PCI_IN_EN0       0x01            /* Enable chain 0 */
++#define AR2315_PCI_IN_EN1       0x02            /* Enable chain 1 */
++#define AR2315_PCI_IN_EN2       0x04            /* Enable chain 2 */
++#define AR2315_PCI_IN_EN3       0x08            /* Enable chain 3 */
++
++#define AR2315_PCI_IN_DIS       (AR2315_PCI + 0x0104)
++#define AR2315_PCI_IN_DIS0      0x01            /* Disable chain 0 */
++#define AR2315_PCI_IN_DIS1      0x02            /* Disable chain 1 */
++#define AR2315_PCI_IN_DIS2      0x04            /* Disable chain 2 */
++#define AR2315_PCI_IN_DIS3      0x08            /* Disable chain 3 */
++
++#define AR2315_PCI_IN_PTR       (AR2315_PCI + 0x0200)
++
++#define AR2315_PCI_OUT_EN       (AR2315_PCI + 0x0400)
++#define AR2315_PCI_OUT_EN0      0x01            /* Enable chain 0 */
++
++#define AR2315_PCI_OUT_DIS      (AR2315_PCI + 0x0404)
++#define AR2315_PCI_OUT_DIS0     0x01            /* Disable chain 0 */
++
++#define AR2315_PCI_OUT_PTR      (AR2315_PCI + 0x0408)
++
++#define AR2315_PCI_INT_STATUS   (AR2315_PCI + 0x0500)   /* write one to clr */
++#define AR2315_PCI_TXINT        0x00000001      /* Desc In Completed */
++#define AR2315_PCI_TXOK         0x00000002      /* Desc In OK */
++#define AR2315_PCI_TXERR        0x00000004      /* Desc In ERR */
++#define AR2315_PCI_TXEOL        0x00000008      /* Desc In End-of-List */
++#define AR2315_PCI_RXINT        0x00000010      /* Desc Out Completed */
++#define AR2315_PCI_RXOK         0x00000020      /* Desc Out OK */
++#define AR2315_PCI_RXERR        0x00000040      /* Desc Out ERR */
++#define AR2315_PCI_RXEOL        0x00000080      /* Desc Out EOL */
++#define AR2315_PCI_TXOOD        0x00000200      /* Desc In Out-of-Desc */
++#define AR2315_PCI_MASK         0x0000FFFF      /* Desc Mask */
++#define AR2315_PCI_EXT_INT      0x02000000
++#define AR2315_PCI_ABORT_INT    0x04000000
++
++#define AR2315_PCI_INT_MASK     (AR2315_PCI + 0x0504)   /* same as INT_STATUS */
++
++#define AR2315_PCI_INTEN_REG    (AR2315_PCI + 0x0508)
++#define AR2315_PCI_INT_DISABLE  0x00            /* disable pci interrupts */
++#define AR2315_PCI_INT_ENABLE   0x01            /* enable pci interrupts */
++
++#define AR2315_PCI_HOST_IN_EN   (AR2315_PCI + 0x0800)
++#define AR2315_PCI_HOST_IN_DIS  (AR2315_PCI + 0x0804)
++#define AR2315_PCI_HOST_IN_PTR  (AR2315_PCI + 0x0810)
++#define AR2315_PCI_HOST_OUT_EN  (AR2315_PCI + 0x0900)
++#define AR2315_PCI_HOST_OUT_DIS (AR2315_PCI + 0x0904)
++#define AR2315_PCI_HOST_OUT_PTR (AR2315_PCI + 0x0908)
++
++
++/*
++ * Local Bus Interface Registers
++ */
++#define AR2315_LB_CONFIG        (AR2315_LOCAL + 0x0000)
++#define AR2315_LBCONF_OE        0x00000001      /* =1 OE is low-true */
++#define AR2315_LBCONF_CS0       0x00000002      /* =1 first CS is low-true */
++#define AR2315_LBCONF_CS1       0x00000004      /* =1 2nd CS is low-true */
++#define AR2315_LBCONF_RDY       0x00000008      /* =1 RDY is low-true */
++#define AR2315_LBCONF_WE        0x00000010      /* =1 Write En is low-true */
++#define AR2315_LBCONF_WAIT      0x00000020      /* =1 WAIT is low-true */
++#define AR2315_LBCONF_ADS       0x00000040      /* =1 Adr Strobe is low-true */
++#define AR2315_LBCONF_MOT       0x00000080      /* =0 Intel, =1 Motorola */
++#define AR2315_LBCONF_8CS       0x00000100      /* =1 8 bits CS, 0= 16bits */
++#define AR2315_LBCONF_8DS       0x00000200      /* =1 8 bits Data S, 0=16bits */
++#define AR2315_LBCONF_ADS_EN    0x00000400      /* =1 Enable ADS */
++#define AR2315_LBCONF_ADR_OE    0x00000800      /* =1 Adr cap on OE, WE or DS */
++#define AR2315_LBCONF_ADDT_MUX  0x00001000      /* =1 Adr and Data share bus */
++#define AR2315_LBCONF_DATA_OE   0x00002000      /* =1 Data cap on OE, WE, DS */
++#define AR2315_LBCONF_16DATA    0x00004000      /* =1 Data is 16 bits wide */
++#define AR2315_LBCONF_SWAPDT    0x00008000      /* =1 Byte swap data */
++#define AR2315_LBCONF_SYNC      0x00010000      /* =1 Bus synchronous to clk */
++#define AR2315_LBCONF_INT       0x00020000      /* =1 Intr is low true */
++#define AR2315_LBCONF_INT_CTR0  0x00000000      /* GND high-Z, Vdd is high-Z */
++#define AR2315_LBCONF_INT_CTR1  0x00040000      /* GND drive, Vdd is high-Z */
++#define AR2315_LBCONF_INT_CTR2  0x00080000      /* GND high-Z, Vdd drive */
++#define AR2315_LBCONF_INT_CTR3  0x000C0000      /* GND drive, Vdd drive */
++#define AR2315_LBCONF_RDY_WAIT  0x00100000      /* =1 RDY is negative of WAIT */
++#define AR2315_LBCONF_INT_PULSE 0x00200000      /* =1 Interrupt is a pulse */
++#define AR2315_LBCONF_ENABLE    0x00400000      /* =1 Falcon respond to LB */
++
++#define AR2315_LB_CLKSEL        (AR2315_LOCAL + 0x0004)
++#define AR2315_LBCLK_EXT        0x0001          /* use external clk for lb */
++
++#define AR2315_LB_1MS           (AR2315_LOCAL + 0x0008)
++#define AR2315_LB1MS_MASK       0x3FFFF         /* # of AHB clk cycles in 1ms */
++
++#define AR2315_LB_MISCCFG       (AR2315_LOCAL + 0x000C)
++#define AR2315_LBM_TXD_EN       0x00000001      /* Enable TXD for fragments */
++#define AR2315_LBM_RX_INTEN     0x00000002      /* Enable LB ints on RX ready */
++#define AR2315_LBM_MBOXWR_INTEN 0x00000004      /* Enable LB ints on mbox wr */
++#define AR2315_LBM_MBOXRD_INTEN 0x00000008      /* Enable LB ints on mbox rd */
++#define AR2315_LMB_DESCSWAP_EN  0x00000010      /* Byte swap desc enable */
++#define AR2315_LBM_TIMEOUT_MASK 0x00FFFF80
++#define AR2315_LBM_TIMEOUT_SHFT 7
++#define AR2315_LBM_PORTMUX      0x07000000
++
++
++#define AR2315_LB_RXTSOFF       (AR2315_LOCAL + 0x0010)
++
++#define AR2315_LB_TX_CHAIN_EN   (AR2315_LOCAL + 0x0100)
++#define AR2315_LB_TXEN_0        0x01
++#define AR2315_LB_TXEN_1        0x02
++#define AR2315_LB_TXEN_2        0x04
++#define AR2315_LB_TXEN_3        0x08
++
++#define AR2315_LB_TX_CHAIN_DIS  (AR2315_LOCAL + 0x0104)
++#define AR2315_LB_TX_DESC_PTR   (AR2315_LOCAL + 0x0200)
++
++#define AR2315_LB_RX_CHAIN_EN   (AR2315_LOCAL + 0x0400)
++#define AR2315_LB_RXEN          0x01
++
++#define AR2315_LB_RX_CHAIN_DIS  (AR2315_LOCAL + 0x0404)
++#define AR2315_LB_RX_DESC_PTR   (AR2315_LOCAL + 0x0408)
++
++#define AR2315_LB_INT_STATUS    (AR2315_LOCAL + 0x0500)
++#define AR2315_INT_TX_DESC      0x0001
++#define AR2315_INT_TX_OK        0x0002
++#define AR2315_INT_TX_ERR       0x0004
++#define AR2315_INT_TX_EOF       0x0008
++#define AR2315_INT_RX_DESC      0x0010
++#define AR2315_INT_RX_OK        0x0020
++#define AR2315_INT_RX_ERR       0x0040
++#define AR2315_INT_RX_EOF       0x0080
++#define AR2315_INT_TX_TRUNC     0x0100
++#define AR2315_INT_TX_STARVE    0x0200
++#define AR2315_INT_LB_TIMEOUT   0x0400
++#define AR2315_INT_LB_ERR       0x0800
++#define AR2315_INT_MBOX_WR      0x1000
++#define AR2315_INT_MBOX_RD      0x2000
++
++/* Bit definitions for INT MASK are the same as INT_STATUS */
++#define AR2315_LB_INT_MASK      (AR2315_LOCAL + 0x0504)
++
++#define AR2315_LB_INT_EN        (AR2315_LOCAL + 0x0508)
++#define AR2315_LB_MBOX          (AR2315_LOCAL + 0x0600)
++
++/*
++ * IR Interface Registers
++ */
++#define AR2315_IR_PKTDATA                   (AR2315_IR + 0x0000)
++
++#define AR2315_IR_PKTLEN                    (AR2315_IR + 0x07fc) /* 0 - 63 */
++
++#define AR2315_IR_CONTROL                   (AR2315_IR + 0x0800)
++#define AR2315_IRCTL_TX                     0x00000000  /* use as tranmitter */
++#define AR2315_IRCTL_RX                     0x00000001  /* use as receiver   */
++#define AR2315_IRCTL_SAMPLECLK_MASK         0x00003ffe  /* Sample clk divisor mask */
++#define AR2315_IRCTL_SAMPLECLK_SHFT                  1
++#define AR2315_IRCTL_OUTPUTCLK_MASK         0x03ffc000  /* Output clk divisor mask */
++#define AR2315_IRCTL_OUTPUTCLK_SHFT                 14
++
++#define AR2315_IR_STATUS                    (AR2315_IR + 0x0804)
++#define AR2315_IRSTS_RX                     0x00000001  /* receive in progress */
++#define AR2315_IRSTS_TX                     0x00000002  /* transmit in progress */
++
++#define AR2315_IR_CONFIG                    (AR2315_IR + 0x0808)
++#define AR2315_IRCFG_INVIN                  0x00000001  /* invert input polarity */
++#define AR2315_IRCFG_INVOUT                 0x00000002  /* invert output polarity */
++#define AR2315_IRCFG_SEQ_START_WIN_SEL      0x00000004  /* 1 => 28, 0 => 7 */
++#define AR2315_IRCFG_SEQ_START_THRESH       0x000000f0  /*  */
++#define AR2315_IRCFG_SEQ_END_UNIT_SEL       0x00000100  /*  */
++#define AR2315_IRCFG_SEQ_END_UNIT_THRESH    0x00007e00  /*  */
++#define AR2315_IRCFG_SEQ_END_WIN_SEL        0x00008000  /*  */
++#define AR2315_IRCFG_SEQ_END_WIN_THRESH     0x001f0000  /*  */
++#define AR2315_IRCFG_NUM_BACKOFF_WORDS      0x01e00000  /*  */
++
++#define HOST_PCI_DEV_ID         3
++#define HOST_PCI_MBAR0          0x10000000
++#define HOST_PCI_MBAR1          0x20000000
++#define HOST_PCI_MBAR2          0x30000000
++
++#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
++#define PCI_DEVICE_MEM_SPACE    0x800000
++
++#endif /* __AR2315_REG_H */
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/ar5312_regs.h
+@@ -0,0 +1,236 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
++ */
++
++#ifndef AR5312_H
++#define AR5312_H
++
++#include <asm/addrspace.h>
++
++/*
++ * IRQs
++ */
++
++#define AR5312_IRQ_WLAN0_INTRS  MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
++#define AR5312_IRQ_ENET0_INTRS  MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
++#define AR5312_IRQ_ENET1_INTRS  MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
++#define AR5312_IRQ_WLAN1_INTRS  MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
++#define AR5312_IRQ_MISC_INTRS   MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
++
++
++/* Address Map */
++#define AR531X_WLAN0            0x18000000
++#define AR531X_WLAN1            0x18500000
++#define AR531X_ENET0            0x18100000
++#define AR531X_ENET1            0x18200000
++#define AR531X_SDRAMCTL         0x18300000
++#define AR531X_FLASHCTL         0x18400000
++#define AR531X_APBBASE		0x1c000000
++#define AR531X_FLASH            0x1e000000
++#define AR531X_UART0            0xbc000003      /* UART MMR */
++
++/*
++ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
++ * should be considered available.  The AR5312 supports 2 enet MACS,
++ * even though many reference boards only actually use 1 of them
++ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
++ * The AR2312 supports 1 enet MAC.
++ */
++#define AR531X_NUM_ENET_MAC             2
++
++/*
++ * Need these defines to determine true number of ethernet MACs
++ */
++#define AR5212_AR5312_REV2      0x0052          /* AR5312 WMAC (AP31) */
++#define AR5212_AR5312_REV7      0x0057          /* AR5312 WMAC (AP30-040) */
++#define AR5212_AR2313_REV8      0x0058          /* AR2313 WMAC (AP43-030) */
++#define AR531X_RADIO_MASK_OFF  0xc8
++#define AR531X_RADIO0_MASK     0x0003
++#define AR531X_RADIO1_MASK     0x000c
++#define AR531X_RADIO1_S        2
++
++/*
++ * AR531X_NUM_WMAC defines the number of Wireless MACs that\
++ * should be considered available.
++ */
++#define AR531X_NUM_WMAC                 2
++
++/* Reset/Timer Block Address Map */
++#define AR531X_RESETTMR		(AR531X_APBBASE  + 0x3000)
++#define AR531X_TIMER		(AR531X_RESETTMR + 0x0000) /* countdown timer */
++#define AR531X_WD_CTRL          (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
++#define AR531X_WD_TIMER         (AR531X_RESETTMR + 0x000c) /* watchdog timer */
++#define AR531X_ISR		(AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
++#define AR531X_IMR		(AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
++#define AR531X_RESET		(AR531X_RESETTMR + 0x0020)
++#define AR5312_CLOCKCTL1	(AR531X_RESETTMR + 0x0064)
++#define AR5312_SCRATCH   	(AR531X_RESETTMR + 0x006c)
++#define AR531X_PROCADDR		(AR531X_RESETTMR + 0x0070)
++#define AR531X_PROC1		(AR531X_RESETTMR + 0x0074)
++#define AR531X_DMAADDR		(AR531X_RESETTMR + 0x0078)
++#define AR531X_DMA1		(AR531X_RESETTMR + 0x007c)
++#define AR531X_ENABLE           (AR531X_RESETTMR + 0x0080) /* interface enb */
++#define AR531X_REV		(AR531X_RESETTMR + 0x0090) /* revision */
++
++/* AR531X_WD_CTRL register bit field definitions */
++#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
++#define AR531X_WD_CTRL_NMI               0x0001
++#define AR531X_WD_CTRL_RESET             0x0002
++
++/* AR531X_ISR register bit field definitions */
++#define AR531X_ISR_NONE		0x0000
++#define AR531X_ISR_TIMER	0x0001
++#define AR531X_ISR_AHBPROC	0x0002
++#define AR531X_ISR_AHBDMA	0x0004
++#define AR531X_ISR_GPIO		0x0008
++#define AR531X_ISR_UART0	0x0010
++#define AR531X_ISR_UART0DMA	0x0020
++#define AR531X_ISR_WD		0x0040
++#define AR531X_ISR_LOCAL	0x0080
++
++/* AR531X_RESET register bit field definitions */
++#define AR531X_RESET_SYSTEM     0x00000001  /* cold reset full system */
++#define AR531X_RESET_PROC       0x00000002  /* cold reset MIPS core */
++#define AR531X_RESET_WLAN0      0x00000004  /* cold reset WLAN MAC and BB */
++#define AR531X_RESET_EPHY0      0x00000008  /* cold reset ENET0 phy */
++#define AR531X_RESET_EPHY1      0x00000010  /* cold reset ENET1 phy */
++#define AR531X_RESET_ENET0      0x00000020  /* cold reset ENET0 mac */
++#define AR531X_RESET_ENET1      0x00000040  /* cold reset ENET1 mac */
++#define AR531X_RESET_UART0      0x00000100  /* cold reset UART0 (high speed) */
++#define AR531X_RESET_WLAN1      0x00000200  /* cold reset WLAN MAC/BB */
++#define AR531X_RESET_APB        0x00000400  /* cold reset APB (ar5312) */
++#define AR531X_RESET_WARM_PROC  0x00001000  /* warm reset MIPS core */
++#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000  /* warm reset WLAN0 MAC */
++#define AR531X_RESET_WARM_WLAN0_BB  0x00004000  /* warm reset WLAN0 BaseBand */
++#define AR531X_RESET_NMI        0x00010000  /* send an NMI to the processor */
++#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000  /* warm reset WLAN1 mac */
++#define AR531X_RESET_WARM_WLAN1_BB  0x00040000  /* warm reset WLAN1 baseband */
++#define AR531X_RESET_LOCAL_BUS  0x00080000  /* reset local bus */
++#define AR531X_RESET_WDOG       0x00100000  /* last reset was a watchdog */
++
++#define AR531X_RESET_WMAC0_BITS \
++        AR531X_RESET_WLAN0 |\
++        AR531X_RESET_WARM_WLAN0_MAC |\
++        AR531X_RESET_WARM_WLAN0_BB
++
++#define AR531X_RESERT_WMAC1_BITS \
++        AR531X_RESET_WLAN1 |\
++        AR531X_RESET_WARM_WLAN1_MAC |\
++        AR531X_RESET_WARM_WLAN1_BB
++
++/* AR5312_CLOCKCTL1 register bit field definitions */
++#define AR5312_CLOCKCTL1_PREDIVIDE_MASK    0x00000030
++#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT            4
++#define AR5312_CLOCKCTL1_MULTIPLIER_MASK   0x00001f00
++#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT           8
++#define AR5312_CLOCKCTL1_DOUBLER_MASK      0x00010000
++
++/* Valid for AR5312 and AR2312 */
++#define AR5312_CLOCKCTL1_PREDIVIDE_MASK    0x00000030
++#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT            4
++#define AR5312_CLOCKCTL1_MULTIPLIER_MASK   0x00001f00
++#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT           8
++#define AR5312_CLOCKCTL1_DOUBLER_MASK      0x00010000
++
++/* Valid for AR2313 */
++#define AR2313_CLOCKCTL1_PREDIVIDE_MASK    0x00003000
++#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT           12
++#define AR2313_CLOCKCTL1_MULTIPLIER_MASK   0x001f0000
++#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT          16
++#define AR2313_CLOCKCTL1_DOUBLER_MASK      0x00000000
++
++
++/* AR531X_ENABLE register bit field definitions */
++#define AR531X_ENABLE_WLAN0              0x0001
++#define AR531X_ENABLE_ENET0              0x0002
++#define AR531X_ENABLE_ENET1              0x0004
++#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008   /* UART, and WLAN1 PIOs */
++#define AR531X_ENABLE_WLAN1_DMA          0x0010   /* WLAN1 DMAs */
++#define AR531X_ENABLE_WLAN1 \
++            (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
++
++/* AR531X_REV register bit field definitions */
++#define AR531X_REV_WMAC_MAJ    0xf000
++#define AR531X_REV_WMAC_MAJ_S  12
++#define AR531X_REV_WMAC_MIN    0x0f00
++#define AR531X_REV_WMAC_MIN_S  8
++#define AR531X_REV_MAJ         0x00f0
++#define AR531X_REV_MAJ_S       4
++#define AR531X_REV_MIN         0x000f
++#define AR531X_REV_MIN_S       0
++#define AR531X_REV_CHIP        (AR531X_REV_MAJ|AR531X_REV_MIN)
++
++/* Major revision numbers, bits 7..4 of Revision ID register */
++#define AR531X_REV_MAJ_AR5312          0x4
++#define AR531X_REV_MAJ_AR2313          0x5
++
++/* Minor revision numbers, bits 3..0 of Revision ID register */
++#define AR5312_REV_MIN_DUAL     0x0     /* Dual WLAN version */
++#define AR5312_REV_MIN_SINGLE   0x1     /* Single WLAN version */
++
++/* AR531X_FLASHCTL register bit field definitions */
++#define FLASHCTL_IDCY   0x0000000f      /* Idle cycle turn around time */
++#define FLASHCTL_IDCY_S 0
++#define FLASHCTL_WST1   0x000003e0      /* Wait state 1 */
++#define FLASHCTL_WST1_S 5
++#define FLASHCTL_RBLE   0x00000400      /* Read byte lane enable */
++#define FLASHCTL_WST2   0x0000f800      /* Wait state 2 */
++#define FLASHCTL_WST2_S 11
++#define FLASHCTL_AC     0x00070000      /* Flash address check (added) */
++#define FLASHCTL_AC_S   16
++#define FLASHCTL_AC_128K 0x00000000
++#define FLASHCTL_AC_256K 0x00010000
++#define FLASHCTL_AC_512K 0x00020000
++#define FLASHCTL_AC_1M   0x00030000
++#define FLASHCTL_AC_2M   0x00040000
++#define FLASHCTL_AC_4M   0x00050000
++#define FLASHCTL_AC_8M   0x00060000
++#define FLASHCTL_AC_RES  0x00070000     /* 16MB is not supported */
++#define FLASHCTL_E      0x00080000      /* Flash bank enable (added) */
++#define FLASHCTL_BUSERR 0x01000000      /* Bus transfer error status flag */
++#define FLASHCTL_WPERR  0x02000000      /* Write protect error status flag */
++#define FLASHCTL_WP     0x04000000      /* Write protect */
++#define FLASHCTL_BM     0x08000000      /* Burst mode */
++#define FLASHCTL_MW     0x30000000      /* Memory width */
++#define FLASHCTL_MWx8   0x00000000      /* Memory width x8 */
++#define FLASHCTL_MWx16  0x10000000      /* Memory width x16 */
++#define FLASHCTL_MWx32  0x20000000      /* Memory width x32 (not supported) */
++#define FLASHCTL_ATNR   0x00000000      /* Access type == no retry */
++#define FLASHCTL_ATR    0x80000000      /* Access type == retry every */
++#define FLASHCTL_ATR4   0xc0000000      /* Access type == retry every 4 */
++
++/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices.  */
++#define AR531X_FLASHCTL0        (AR531X_FLASHCTL + 0x00)
++#define AR531X_FLASHCTL1        (AR531X_FLASHCTL + 0x04)
++#define AR531X_FLASHCTL2        (AR531X_FLASHCTL + 0x08)
++
++/* ARM SDRAM Controller -- just enough to determine memory size */
++#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
++#define MEM_CFG1_AC0    0x00000700      /* bank 0: SDRAM addr check (added) */
++#define MEM_CFG1_AC0_S  8
++#define MEM_CFG1_AC1    0x00007000      /* bank 1: SDRAM addr check (added) */
++#define MEM_CFG1_AC1_S  12
++
++/* GPIO Address Map */
++#define AR531X_GPIO         (AR531X_APBBASE  + 0x2000)
++#define AR531X_GPIO_DO      (AR531X_GPIO + 0x00)        /* output register */
++#define AR531X_GPIO_DI      (AR531X_GPIO + 0x04)        /* intput register */
++#define AR531X_GPIO_CR      (AR531X_GPIO + 0x08)        /* control register */
++
++/* GPIO Control Register bit field definitions */
++#define AR531X_GPIO_CR_M(x)    (1 << (x))                      /* mask for i/o */
++#define AR531X_GPIO_CR_O(x)    (0 << (x))                      /* mask for output */
++#define AR531X_GPIO_CR_I(x)    (1 << (x))                      /* mask for input */
++#define AR531X_GPIO_CR_INT(x)  (1 << ((x)+8))                  /* mask for interrupt */
++#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16))                 /* uart multiplex */
++#define AR531X_NUM_GPIO		8
++
++
++#endif
++
+--- /dev/null
++++ b/arch/mips/ar231x/ar5312.c
+@@ -0,0 +1,563 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++ */
++
++/*
++ * Platform devices for Atheros SoCs
++ */
++
++#include <linux/autoconf.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/string.h>
++#include <linux/mtd/physmap.h>
++#include <linux/platform_device.h>
++#include <linux/kernel.h>
++#include <linux/reboot.h>
++#include <linux/leds.h>
++#include <asm/bootinfo.h>
++#include <asm/reboot.h>
++#include <asm/time.h>
++#include <asm/irq.h>
++#include <asm/io.h>
++#include <gpio.h>
++
++#include <ar231x_platform.h>
++#include <ar5312_regs.h>
++#include <ar231x.h>
++#include "devices.h"
++#include "ar5312.h"
++
++#define IS_5312() (current_cpu_data.cputype != CPU_4KEC)
++
++static void
++ar5312_misc_irq_dispatch(void)
++{
++	unsigned int ar231x_misc_intrs = ar231x_read_reg(AR531X_ISR) & ar231x_read_reg(AR531X_IMR);
++
++	if (ar231x_misc_intrs & AR531X_ISR_TIMER) {
++		do_IRQ(AR531X_MISC_IRQ_TIMER);
++		(void)ar231x_read_reg(AR531X_TIMER);
++	} else if (ar231x_misc_intrs & AR531X_ISR_AHBPROC)
++		do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
++	else if ((ar231x_misc_intrs & AR531X_ISR_UART0))
++		do_IRQ(AR531X_MISC_IRQ_UART0);
++	else if (ar231x_misc_intrs & AR531X_ISR_WD)
++		do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
++	else
++		do_IRQ(AR531X_MISC_IRQ_NONE);
++}
++
++void
++ar5312_irq_dispatch(void)
++{
++	int pending = read_c0_status() & read_c0_cause();
++
++	if (pending & CAUSEF_IP2)
++		do_IRQ(AR5312_IRQ_WLAN0_INTRS);
++	else if (pending & CAUSEF_IP3)
++		do_IRQ(AR5312_IRQ_ENET0_INTRS);
++	else if (pending & CAUSEF_IP4)
++		do_IRQ(AR5312_IRQ_ENET1_INTRS);
++	else if (pending & CAUSEF_IP5)
++		do_IRQ(AR5312_IRQ_WLAN1_INTRS);
++	else if (pending & CAUSEF_IP6)
++		ar5312_misc_irq_dispatch();
++	else if (pending & CAUSEF_IP7)
++		do_IRQ(AR531X_IRQ_CPU_CLOCK);
++}
++
++
++/* Enable the specified AR531X_MISC_IRQ interrupt */
++static void
++ar5312_misc_intr_enable(unsigned int irq)
++{
++	unsigned int imr;
++
++	imr = ar231x_read_reg(AR531X_IMR);
++	imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1));
++	ar231x_write_reg(AR531X_IMR, imr);
++}
++
++/* Disable the specified AR531X_MISC_IRQ interrupt */
++static void
++ar5312_misc_intr_disable(unsigned int irq)
++{
++	unsigned int imr;
++
++	imr = ar231x_read_reg(AR531X_IMR);
++	imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1));
++	ar231x_write_reg(AR531X_IMR, imr);
++	ar231x_read_reg(AR531X_IMR); /* flush write buffer */
++}
++
++static unsigned int
++ar5312_misc_intr_startup(unsigned int irq)
++{
++	ar5312_misc_intr_enable(irq);
++	return 0;
++}
++
++static void
++ar5312_misc_intr_end(unsigned int irq)
++{
++	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
++		ar5312_misc_intr_enable(irq);
++}
++
++static struct irq_chip ar5312_misc_intr_controller = {
++	.name     = "AR5312-MISC",
++	.startup  = ar5312_misc_intr_startup,
++	.shutdown = ar5312_misc_intr_disable,
++	.enable   = ar5312_misc_intr_enable,
++	.disable  = ar5312_misc_intr_disable,
++	.ack      = ar5312_misc_intr_disable,
++	.end      = ar5312_misc_intr_end,
++};
++
++
++static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id)
++{
++	u32 proc1 = ar231x_read_reg(AR531X_PROC1);
++	u32 procAddr = ar231x_read_reg(AR531X_PROCADDR); /* clears error state */
++	u32 dma1 = ar231x_read_reg(AR531X_DMA1);
++	u32 dmaAddr = ar231x_read_reg(AR531X_DMAADDR);   /* clears error state */
++
++	printk("AHB interrupt: PROCADDR=0x%8.8x  PROC1=0x%8.8x  DMAADDR=0x%8.8x  DMA1=0x%8.8x\n",
++			procAddr, proc1, dmaAddr, dma1);
++
++	machine_restart("AHB error"); /* Catastrophic failure */
++	return IRQ_HANDLED;
++}
++
++
++static struct irqaction ar5312_ahb_proc_interrupt  = {
++	.handler = ar5312_ahb_proc_handler,
++	.flags   = IRQF_DISABLED,
++	.name    = "ar5312_ahb_proc_interrupt",
++};
++
++
++static struct irqaction cascade  = {
++	.handler = no_action,
++	.flags   = IRQF_DISABLED,
++	.name    = "cascade",
++};
++
++void __init ar5312_irq_init(void)
++{
++	int i;
++
++	if (!IS_5312())
++		return;
++
++	ar231x_irq_dispatch = ar5312_irq_dispatch;
++	for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
++		int irq = AR531X_MISC_IRQ_BASE + i;
++		irq_desc[irq].status = IRQ_DISABLED;
++		irq_desc[irq].action = NULL;
++		irq_desc[irq].depth = 1;
++		irq_desc[irq].chip = &ar5312_misc_intr_controller;
++	}
++	setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt);
++	setup_irq(AR5312_IRQ_MISC_INTRS, &cascade);
++}
++
++const struct ar231x_gpiodev ar5312_gpiodev;
++
++static u32
++ar5312_gpio_get_output(void)
++{
++	u32 reg;
++	reg = ~(ar231x_read_reg(AR531X_GPIO_CR));
++	reg &= ar5312_gpiodev.valid_mask;
++	return reg;
++}
++
++static u32
++ar5312_gpio_set_output(u32 mask, u32 val)
++{
++	u32 reg;
++
++	reg = ar231x_read_reg(AR531X_GPIO_CR);
++	reg |= mask;
++	reg &= ~val;
++	ar231x_write_reg(AR531X_GPIO_CR, reg);
++	return reg;
++}
++
++static u32
++ar5312_gpio_get(void)
++{
++	u32 reg;
++	reg = ar231x_read_reg(AR531X_GPIO_DI);
++	reg &= ar5312_gpiodev.valid_mask;
++	return reg;
++}
++
++static u32
++ar5312_gpio_set(u32 mask, u32 value)
++{
++	u32 reg;
++	reg = ar231x_read_reg(AR531X_GPIO_DO);
++	reg &= ~mask;
++	reg |= value;
++	ar231x_write_reg(AR531X_GPIO_DO, reg);
++	return reg;
++}
++
++const struct ar231x_gpiodev ar5312_gpiodev = {
++	.valid_mask = (1 << 8) - 1,
++	.get_output = ar5312_gpio_get_output,
++	.set_output = ar5312_gpio_set_output,
++	.get = ar5312_gpio_get,
++	.set = ar5312_gpio_set,
++};
++
++static struct physmap_flash_data ar5312_flash_data = {
++	.width = 2,
++};
++
++static struct resource ar5312_flash_resource = {
++	.start = AR531X_FLASH,
++	.end = AR531X_FLASH + 0x800000 - 1,
++	.flags = IORESOURCE_MEM,
++};
++
++static struct ar231x_eth ar5312_eth0_data = {
++	.reset_base = AR531X_RESET,
++	.reset_mac = AR531X_RESET_ENET0,
++	.reset_phy = AR531X_RESET_EPHY0,
++	.phy_base = KSEG1ADDR(AR531X_ENET0),
++	.config = &ar231x_board,
++};
++
++static struct ar231x_eth ar5312_eth1_data = {
++	.reset_base = AR531X_RESET,
++	.reset_mac = AR531X_RESET_ENET1,
++	.reset_phy = AR531X_RESET_EPHY1,
++	.phy_base = KSEG1ADDR(AR531X_ENET1),
++	.config = &ar231x_board,
++};
++
++static struct platform_device ar5312_physmap_flash = {
++	.name = "physmap-flash",
++	.id = 0,
++	.dev.platform_data = &ar5312_flash_data,
++	.resource = &ar5312_flash_resource,
++	.num_resources = 1,
++};
++
++#ifdef CONFIG_LEDS_GPIO
++static struct gpio_led ar5312_leds[] = {
++	{ .name = "wlan", .gpio = 0, .active_low = 1, },
++};
++
++static const struct gpio_led_platform_data ar5312_led_data = {
++	.num_leds = ARRAY_SIZE(ar5312_leds),
++	.leds = (void *) ar5312_leds,
++};
++
++static struct platform_device ar5312_gpio_leds = {
++	.name = "leds-gpio",
++	.id = -1,
++	.dev.platform_data = (void *) &ar5312_led_data,
++	.num_resources  = 1,
++};
++#endif
++
++/*
++ * NB: This mapping size is larger than the actual flash size,
++ * but this shouldn't be a problem here, because the flash
++ * will simply be mapped multiple times.
++ */
++static char __init *ar5312_flash_limit(void)
++{
++	u32 ctl;
++	/*
++	 * Configure flash bank 0.
++	 * Assume 8M window size. Flash will be aliased if it's smaller
++	 */
++	ctl = FLASHCTL_E |
++		FLASHCTL_AC_8M |
++		FLASHCTL_RBLE |
++		(0x01 << FLASHCTL_IDCY_S) |
++		(0x07 << FLASHCTL_WST1_S) |
++		(0x07 << FLASHCTL_WST2_S) |
++		(ar231x_read_reg(AR531X_FLASHCTL0) & FLASHCTL_MW);
++
++	ar231x_write_reg(AR531X_FLASHCTL0, ctl);
++
++	/* Disable other flash banks */
++	ar231x_write_reg(AR531X_FLASHCTL1,
++		ar231x_read_reg(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC));
++
++	ar231x_write_reg(AR531X_FLASHCTL2,
++		ar231x_read_reg(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
++
++	return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000);
++}
++
++int __init ar5312_init_devices(void)
++{
++	struct ar231x_boarddata *config;
++	u32 fctl = 0;
++	const u8 *radio;
++	u8 *c;
++
++	if (!IS_5312())
++		return 0;
++
++	/* Locate board/radio config data */
++	ar231x_find_config(ar5312_flash_limit());
++	config = ar231x_board.config;
++
++
++	/*
++	 * Chip IDs and hardware detection for some Atheros
++	 * models are really broken!
++	 *
++	 * Atheros uses a disabled WMAC0 and Silicon ID of AR5312
++	 * as indication for AR2312, which is otherwise
++	 * indistinguishable from the real AR5312.
++	 */
++	if (ar231x_board.radio) {
++		radio = ar231x_board.radio + AR531X_RADIO_MASK_OFF;
++		if ((*((const u32 *) radio) & AR531X_RADIO0_MASK) == 0)
++			config->flags |= BD_ISCASPER;
++	} else
++		radio = NULL;
++
++	/* AR2313 has CPU minor rev. 10 */
++	if ((current_cpu_data.processor_id & 0xff) == 0x0a)
++		ar231x_devtype = DEV_TYPE_AR2313;
++
++	/* AR2312 shares the same Silicon ID as AR5312 */
++	else if (config->flags & BD_ISCASPER)
++		ar231x_devtype = DEV_TYPE_AR2312;
++
++	/* Everything else is probably AR5312 or compatible */
++	else
++		ar231x_devtype = DEV_TYPE_AR5312;
++
++	/* fixup flash width */
++	fctl = ar231x_read_reg(AR531X_FLASHCTL) & FLASHCTL_MW;
++	switch (fctl) {
++	case FLASHCTL_MWx16:
++		ar5312_flash_data.width = 2;
++		break;
++	case FLASHCTL_MWx8:
++	default:
++		ar5312_flash_data.width = 1;
++		break;
++	}
++
++	platform_device_register(&ar5312_physmap_flash);
++
++#ifdef CONFIG_LEDS_GPIO
++	ar5312_leds[0].gpio = config->sysLedGpio;
++	platform_device_register(&ar5312_gpio_leds);
++#endif
++
++	/* Fix up MAC addresses if necessary */
++	if (!memcmp(config->enet0_mac, "\xff\xff\xff\xff\xff\xff", 6))
++		memcpy(config->enet0_mac, config->enet1_mac, 6);
++
++	/* If ENET0 and ENET1 have the same mac address,
++	 * increment the one from ENET1 */
++	if (memcmp(config->enet0_mac, config->enet1_mac, 6) == 0) {
++		c = config->enet1_mac + 5;
++		while ((c >= config->enet1_mac) && !(++(*c)))
++			c--;
++	}
++
++	switch(ar231x_devtype) {
++	case DEV_TYPE_AR5312:
++		ar5312_eth0_data.macaddr = config->enet0_mac;
++		ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET0),
++			AR5312_IRQ_ENET0_INTRS, &ar5312_eth0_data);
++
++		ar5312_eth1_data.macaddr = config->enet1_mac;
++		ar231x_add_ethernet(1, KSEG1ADDR(AR531X_ENET1),
++			AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
++
++		if (!ar231x_board.radio)
++			return 0;
++
++		if (*((u32 *) ar231x_board.radio) & AR531X_RADIO0_MASK)
++			ar231x_add_wmac(0, AR531X_WLAN0,
++				AR5312_IRQ_WLAN0_INTRS);
++
++		break;
++	/*
++	 * AR2312/3 ethernet uses the PHY of ENET0, but the MAC
++	 * of ENET1. Atheros calls it 'twisted' for a reason :)
++	 */
++	case DEV_TYPE_AR2312:
++	case DEV_TYPE_AR2313:
++		ar5312_eth1_data.phy_base = ar5312_eth0_data.phy_base;
++		ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy;
++		ar5312_eth1_data.macaddr = config->enet0_mac;
++		ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET1),
++			AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
++
++		if (!ar231x_board.radio)
++			return 0;
++		break;
++	default:
++		break;
++	}
++
++	if (*((u32 *) ar231x_board.radio) & AR531X_RADIO1_MASK)
++		ar231x_add_wmac(1, AR531X_WLAN1,
++			AR5312_IRQ_WLAN1_INTRS);
++
++	return 0;
++}
++
++
++static void ar5312_restart(char *command)
++{
++	/* reset the system */
++	local_irq_disable();
++	while(1) {
++		ar231x_write_reg(AR531X_RESET, AR531X_RESET_SYSTEM);
++	}
++}
++
++
++/*
++ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
++ * to determine the predevisor value.
++ */
++static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = {
++	1,
++	2,
++	4,
++	5
++};
++
++
++static int __init
++ar5312_cpu_frequency(void)
++{
++	unsigned int result;
++	unsigned int predivide_mask, predivide_shift;
++	unsigned int multiplier_mask, multiplier_shift;
++	unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier;
++	unsigned int doubler_mask;
++	u16 devid;
++
++	/* Trust the bootrom's idea of cpu frequency. */
++	if ((result = ar231x_read_reg(AR5312_SCRATCH)))
++		return result;
++
++	devid = ar231x_board.devid;
++	devid &= AR531X_REV_MAJ;
++	devid >>= AR531X_REV_MAJ_S;
++	if (devid == AR531X_REV_MAJ_AR2313) {
++		predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
++		predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
++		multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
++		multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
++		doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
++	} else { /* AR5312 and AR2312 */
++		predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
++		predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
++		multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
++		multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
++		doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
++	}
++
++	/*
++	 * Clocking is derived from a fixed 40MHz input clock.
++	 *
++	 *  cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
++	 *  sysFreq = cpuFreq / 4	   (used for APB clock, serial,
++	 *							   flash, Timer, Watchdog Timer)
++	 *
++	 *  cntFreq = cpuFreq / 2	   (use for CPU count/compare)
++	 *
++	 * So, for example, with a PLL multiplier of 5, we have
++	 *
++	 *  cpuFreq = 200MHz
++	 *  sysFreq = 50MHz
++	 *  cntFreq = 100MHz
++	 *
++	 * We compute the CPU frequency, based on PLL settings.
++	 */
++
++	clockCtl1 = ar231x_read_reg(AR5312_CLOCKCTL1);
++	preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift;
++	preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
++	multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift;
++
++	if (clockCtl1 & doubler_mask) {
++		multiplier = multiplier << 1;
++	}
++	return (40000000 / preDivisor) * multiplier;
++}
++
++static inline int
++ar5312_sys_frequency(void)
++{
++	return ar5312_cpu_frequency() / 4;
++}
++
++void __init
++ar5312_time_init(void)
++{
++	if (!IS_5312())
++		return;
++
++	mips_hpt_frequency = ar5312_cpu_frequency() / 2;
++}
++
++
++void __init
++ar5312_prom_init(void)
++{
++	u32 memsize, memcfg, bank0AC, bank1AC;
++	u32 devid;
++
++	if (!IS_5312())
++		return;
++
++	devid = ar231x_read_reg(AR531X_REV);
++	devid &= AR531X_REV_MAJ | AR531X_REV_MIN;
++
++	/* Detect memory size */
++	memcfg = ar231x_read_reg(AR531X_MEM_CFG1);
++	bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
++	bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
++	memsize = (bank0AC ? (1 << (bank0AC+1)) : 0)
++	        + (bank1AC ? (1 << (bank1AC+1)) : 0);
++	memsize <<= 20;
++	add_memory_region(0, memsize, BOOT_MEM_RAM);
++	ar231x_gpiodev = &ar5312_gpiodev;
++	ar231x_board.devid = (u16) devid;
++}
++
++void __init
++ar5312_plat_setup(void)
++{
++	if (!IS_5312())
++		return;
++
++	/* Clear any lingering AHB errors */
++	ar231x_read_reg(AR531X_PROCADDR);
++	ar231x_read_reg(AR531X_DMAADDR);
++	ar231x_write_reg(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
++
++	_machine_restart = ar5312_restart;
++	ar231x_serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency());
++}
++
+--- /dev/null
++++ b/arch/mips/ar231x/pci.c
+@@ -0,0 +1,231 @@
++/*
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/spinlock.h>
++#include <linux/delay.h>
++#include <linux/irq.h>
++#include <asm/bootinfo.h>
++#include <asm/paccess.h>
++#include <asm/irq_cpu.h>
++#include <asm/io.h>
++#include <ar231x_platform.h>
++#include <ar231x.h>
++#include <ar2315_regs.h>
++
++#define AR531X_MEM_BASE    0x80800000UL
++#define AR531X_MEM_SIZE    0x00ffffffUL
++#define AR531X_IO_SIZE     0x00007fffUL
++
++#define IS_2315() (current_cpu_data.cputype == CPU_4KEC)
++
++static unsigned long configspace;
++
++static int config_access(int devfn, int where, int size, u32 *ptr, bool write)
++{
++	unsigned long flags;
++	int func = PCI_FUNC(devfn);
++	int dev = PCI_SLOT(devfn);
++	u32 value = 0;
++	int err = 0;
++	u32 addr;
++
++	if (((dev != 0) && (dev != 3)) || (func > 2))
++		return PCIBIOS_DEVICE_NOT_FOUND;
++
++	/* Select Configuration access */
++	local_irq_save(flags);
++	ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, 0, AR2315_PCIMISC_CFG_SEL);
++	mb();
++
++	addr = (u32) configspace + (1 << (13 + dev)) + (func << 8) + where;
++	if (size == 1)
++		addr ^= 0x3;
++	else if (size == 2)
++		addr ^= 0x2;
++
++	if (write) {
++		value = *ptr;
++		if (size == 1)
++			err = put_dbe(value, (u8 *) addr);
++		else if (size == 2)
++			err = put_dbe(value, (u16 *) addr);
++		else if (size == 4)
++			err = put_dbe(value, (u32 *) addr);
++	} else {
++		if (size == 1)
++			err = get_dbe(value, (u8 *) addr);
++		else if (size == 2)
++			err = get_dbe(value, (u16 *) addr);
++		else if (size == 4)
++			err = get_dbe(value, (u32 *) addr);
++		if (err)
++			*ptr = 0xffffffff;
++		else
++			*ptr = value;
++	}
++
++	/* Select Memory access */
++	ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_CFG_SEL, 0);
++	local_irq_restore(flags);
++
++	return (err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL);
++}
++
++static int ar231x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value)
++{
++	return config_access(devfn, where, size, value, 0);
++}
++
++static int ar231x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
++{
++	return config_access(devfn, where, size, &value, 1);
++}
++
++struct pci_ops ar231x_pci_ops = {
++	.read	= ar231x_pci_read,
++	.write	= ar231x_pci_write,
++};
++
++static struct resource ar231x_mem_resource = {
++	.name	= "AR531x PCI MEM",
++	.start	= AR531X_MEM_BASE,
++	.end	= AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE - 1 + 0x4000000,
++	.flags	= IORESOURCE_MEM,
++};
++
++static struct resource ar231x_io_resource = {
++	.name	= "AR531x PCI I/O",
++	.start	= AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE,
++	.end	= AR531X_MEM_BASE + AR531X_MEM_SIZE - 1,
++	.flags	= IORESOURCE_IO,
++};
++
++struct pci_controller ar231x_pci_controller = {
++	.pci_ops		= &ar231x_pci_ops,
++	.mem_resource	= &ar231x_mem_resource,
++	.io_resource	= &ar231x_io_resource,
++	.mem_offset     = 0x00000000UL,
++	.io_offset      = 0x00000000UL,
++};
++
++int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++	return AR2315_IRQ_LCBUS_PCI;
++}
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 5);
++	pci_write_config_word(dev, 0x40, 0);
++
++	/* Clear any pending Abort or external Interrupts
++	 * and enable interrupt processing */
++	ar231x_mask_reg(AR2315_PCI_INTEN_REG, AR2315_PCI_INT_ENABLE, 0);
++	ar231x_write_reg(AR2315_PCI_INT_STATUS, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT));
++	ar231x_write_reg(AR2315_PCI_INT_MASK, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT));
++	ar231x_mask_reg(AR2315_PCI_INTEN_REG, 0, AR2315_PCI_INT_ENABLE);
++
++	return 0;
++}
++
++static void
++ar2315_pci_fixup(struct pci_dev *dev)
++{
++	unsigned int devfn = dev->devfn;
++
++	if (dev->bus->number != 0)
++		return;
++
++	/* Only fix up the PCI host settings */
++	if ((PCI_SLOT(devfn) != 3) || (PCI_FUNC(devfn) != 0))
++		return;
++
++	/* Fix up MBARs */
++	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, HOST_PCI_MBAR0);
++	pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, HOST_PCI_MBAR1);
++	pci_write_config_dword(dev, PCI_BASE_ADDRESS_2, HOST_PCI_MBAR2);
++	pci_write_config_dword(dev, PCI_COMMAND,
++		PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL |
++		PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR |
++		PCI_COMMAND_FAST_BACK);
++}
++DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, ar2315_pci_fixup);
++
++static int __init
++ar2315_pci_init(void)
++{
++	u32 reg;
++
++	if (!IS_2315())
++		return -ENODEV;
++
++	configspace = (unsigned long) ioremap_nocache(0x80000000, 1*1024*1024); /* Remap PCI config space */
++	ar231x_pci_controller.io_map_base =
++		(unsigned long) ioremap_nocache(AR531X_MEM_BASE + AR531X_MEM_SIZE, AR531X_IO_SIZE);
++	set_io_port_base(ar231x_pci_controller.io_map_base); /* PCI I/O space */
++
++	reg = ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA);
++	msleep(10);
++
++	reg &= ~AR2315_RESET_PCIDMA;
++	ar231x_write_reg(AR2315_RESET, reg);
++	msleep(10);
++
++	ar231x_mask_reg(AR2315_ENDIAN_CTL, 0,
++		AR2315_CONFIG_PCIAHB | AR2315_CONFIG_PCIAHB_BRIDGE);
++
++	ar231x_write_reg(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM |
++		(AR2315_PCICLK_IN_FREQ_DIV_6 << AR2315_PCICLK_DIV_S));
++	ar231x_mask_reg(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI);
++	ar231x_mask_reg(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK | AR2315_IF_MASK,
++		AR2315_IF_PCI | AR2315_IF_PCI_HOST | AR2315_IF_PCI_INTR |
++		 (AR2315_IF_PCI_CLK_OUTPUT_CLK << AR2315_IF_PCI_CLK_SHIFT));
++
++	/* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */
++	ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE,
++		AR2315_PCIRST_LOW);
++	msleep(100);
++
++	/* Bring the PCI out of reset */
++	ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE,
++		AR2315_PCIRST_HIGH | AR2315_PCICACHE_DIS | 0x8);
++
++	ar231x_write_reg(AR2315_PCI_UNCACHE_CFG,
++			0x1E | /* 1GB uncached */
++			(1 << 5) | /* Enable uncached */
++			(0x2 << 30) /* Base: 0x80000000 */
++	);
++	ar231x_read_reg(AR2315_PCI_UNCACHE_CFG);
++
++	msleep(500);
++
++	/* dirty hack - anyone with a datasheet that knows the memory map ? */
++	ioport_resource.start = 0x10000000;
++	ioport_resource.end = 0xffffffff;
++	iomem_resource.start = 0x10000000;
++	iomem_resource.end = 0xffffffff;
++
++	register_pci_controller(&ar231x_pci_controller);
++
++	return 0;
++}
++
++arch_initcall(ar2315_pci_init);
+--- /dev/null
++++ b/arch/mips/ar231x/ar2315.c
+@@ -0,0 +1,688 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
++ */
++
++/*
++ * Platform devices for Atheros SoCs
++ */
++
++#include <linux/autoconf.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/string.h>
++#include <linux/platform_device.h>
++#include <linux/kernel.h>
++#include <linux/reboot.h>
++#include <linux/delay.h>
++#include <linux/leds.h>
++#include <asm/bootinfo.h>
++#include <asm/reboot.h>
++#include <asm/time.h>
++#include <asm/irq.h>
++#include <asm/io.h>
++#include <asm/gpio.h>
++
++#include <ar231x_platform.h>
++#include <ar2315_regs.h>
++#include <ar231x.h>
++#include "devices.h"
++#include "ar2315.h"
++
++#define IS_2315() (current_cpu_data.cputype == CPU_4KEC)
++
++static u32 gpiointmask = 0, gpiointval = 0;
++
++static inline void ar2315_gpio_irq(void)
++{
++	u32 pend;
++	int bit;
++
++	/* only do one gpio interrupt at a time */
++	pend = (ar231x_read_reg(AR2315_GPIO_DI) ^ gpiointval) & gpiointmask;
++	if (!pend)
++		return;
++
++	bit = fls(pend);
++	pend ^= (1 << bit);
++	gpiointval ^= (1 << bit);
++
++	/* ACK the interrupt only if we handled all bits */
++	if (!pend)
++		ar231x_write_reg(AR2315_ISR, ar231x_read_reg(AR2315_IMR) | ~AR2315_ISR_GPIO);
++
++	do_IRQ(AR531X_GPIO_IRQ_BASE + fls(pend) - 1);
++}
++
++#ifdef CONFIG_ATHEROS_AR2315_PCI
++static inline void pci_abort_irq(void)
++{
++	ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_ABORT_INT);
++}
++
++static inline void pci_ack_irq(void)
++{
++	ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_EXT_INT);
++}
++
++void ar2315_pci_irq(int irq)
++{
++	if (ar231x_read_reg(AR2315_PCI_INT_STATUS) == AR2315_PCI_ABORT_INT)
++		pci_abort_irq();
++	else {
++		do_IRQ(irq);
++		pci_ack_irq();
++	}
++}
++#endif /* CONFIG_ATHEROS_AR2315_PCI */
++
++/*
++ * Called when an interrupt is received, this function
++ * determines exactly which interrupt it was, and it
++ * invokes the appropriate handler.
++ *
++ * Implicitly, we also define interrupt priority by
++ * choosing which to dispatch first.
++ */
++static void
++ar2315_irq_dispatch(void)
++{
++	int pending = read_c0_status() & read_c0_cause();
++
++	if (pending & CAUSEF_IP3)
++		do_IRQ(AR2315_IRQ_WLAN0_INTRS);
++	else if (pending & CAUSEF_IP4)
++		do_IRQ(AR2315_IRQ_ENET0_INTRS);
++#ifdef CONFIG_ATHEROS_AR2315_PCI
++	else if (pending & CAUSEF_IP5)
++		ar2315_pci_irq(AR2315_IRQ_LCBUS_PCI);
++#endif
++	else if (pending & CAUSEF_IP2) {
++		unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR);
++
++		if (misc_intr & AR2315_ISR_SPI)
++			do_IRQ(AR531X_MISC_IRQ_SPI);
++		else if (misc_intr & AR2315_ISR_TIMER)
++			do_IRQ(AR531X_MISC_IRQ_TIMER);
++		else if (misc_intr & AR2315_ISR_AHB)
++			do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
++		else if (misc_intr & AR2315_ISR_GPIO)
++			ar2315_gpio_irq();
++		else if (misc_intr & AR2315_ISR_UART0)
++			do_IRQ(AR531X_MISC_IRQ_UART0);
++		else if (misc_intr & AR2315_ISR_WD)
++			do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
++		else
++			do_IRQ(AR531X_MISC_IRQ_NONE);
++	} else if (pending & CAUSEF_IP7)
++		do_IRQ(AR531X_IRQ_CPU_CLOCK);
++}
++
++static void ar2315_set_gpiointmask(int gpio, int level)
++{
++	u32 reg;
++
++
++	reg = ar231x_read_reg(AR2315_GPIO_INT);
++	reg &= ~(AR2315_GPIO_INT_M | AR2315_GPIO_INT_LVL_M);
++	reg |= gpio | AR2315_GPIO_INT_LVL(level);
++	ar231x_write_reg(AR2315_GPIO_INT, reg);
++}
++
++static void ar2315_gpio_intr_enable(unsigned int irq)
++{
++	unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
++	u32 reg;
++
++	gpiointmask &= ~(1 << gpio);
++
++	/* reconfigure GPIO line as input */
++	reg = ar231x_read_reg(AR2315_GPIO_CR);
++	reg &= ~(AR2315_GPIO_CR_M(gpio));
++	reg |= AR2315_GPIO_CR_I(gpio);
++	ar231x_write_reg(AR2315_GPIO_CR, reg);
++
++	/* Enable interrupt with edge detection */
++	ar2315_set_gpiointmask(gpio, 3);
++}
++
++static void ar2315_gpio_intr_disable(unsigned int irq)
++{
++	unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
++
++	gpiointmask |= (1 << gpio);
++
++	/* Disable interrupt */
++	ar2315_set_gpiointmask(gpio, 0);
++}
++
++static struct irq_chip ar2315_gpio_intr_controller = {
++	.typename	= "AR2315-GPIO",
++	.disable  = ar2315_gpio_intr_disable,
++	.ack      = ar2315_gpio_intr_disable,
++	.mask_ack = ar2315_gpio_intr_disable,
++	.unmask   = ar2315_gpio_intr_enable,
++	.eoi   = ar2315_gpio_intr_enable,
++};
++
++static void
++ar2315_misc_intr_enable(unsigned int irq)
++{
++	unsigned int imr;
++
++	imr = ar231x_read_reg(AR2315_IMR);
++	switch(irq) {
++	case AR531X_MISC_IRQ_SPI:
++		 imr |= AR2315_ISR_SPI;
++		 break;
++	case AR531X_MISC_IRQ_TIMER:
++	     imr |= AR2315_ISR_TIMER;
++	     break;
++	case AR531X_MISC_IRQ_AHB_PROC:
++	     imr |= AR2315_ISR_AHB;
++	     break;
++	case AR531X_MISC_IRQ_GPIO:
++	     imr |= AR2315_ISR_GPIO;
++	     break;
++	case AR531X_MISC_IRQ_UART0:
++	     imr |= AR2315_ISR_UART0;
++	     break;
++	case AR531X_MISC_IRQ_WATCHDOG:
++	     imr |= AR2315_ISR_WD;
++	     break;
++	default:
++		break;
++	}
++	ar231x_write_reg(AR2315_IMR, imr);
++}
++
++static void
++ar2315_misc_intr_disable(unsigned int irq)
++{
++	unsigned int imr;
++
++	imr = ar231x_read_reg(AR2315_IMR);
++	switch(irq) {
++	case AR531X_MISC_IRQ_SPI:
++		 imr &= ~AR2315_ISR_SPI;
++		 break;
++	case AR531X_MISC_IRQ_TIMER:
++	     imr &= ~AR2315_ISR_TIMER;
++	     break;
++	case AR531X_MISC_IRQ_AHB_PROC:
++	     imr &= ~AR2315_ISR_AHB;
++	     break;
++	case AR531X_MISC_IRQ_GPIO:
++	     imr &= ~AR2315_ISR_GPIO;
++	     break;
++	case AR531X_MISC_IRQ_UART0:
++	     imr &= ~AR2315_ISR_UART0;
++	     break;
++	case AR531X_MISC_IRQ_WATCHDOG:
++	     imr &= ~AR2315_ISR_WD;
++	     break;
++	default:
++		break;
++	}
++	ar231x_write_reg(AR2315_IMR, imr);
++}
++
++static unsigned int
++ar2315_misc_intr_startup(unsigned int irq)
++{
++	ar2315_misc_intr_enable(irq);
++	return 0;
++}
++
++static void
++ar2315_misc_intr_end(unsigned int irq)
++{
++	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
++		ar2315_misc_intr_enable(irq);
++}
++
++
++static struct irq_chip ar2315_misc_intr_controller = {
++	.typename	= "AR2315-MISC",
++	.startup  = ar2315_misc_intr_startup,
++	.shutdown = ar2315_misc_intr_disable,
++	.enable   = ar2315_misc_intr_enable,
++	.disable  = ar2315_misc_intr_disable,
++	.ack      = ar2315_misc_intr_disable,
++	.end      = ar2315_misc_intr_end,
++};
++
++static irqreturn_t ar2315_ahb_proc_handler(int cpl, void *dev_id)
++{
++    ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET);
++    ar231x_read_reg(AR2315_AHB_ERR1);
++
++    printk(KERN_ERR "AHB fatal error\n");
++    machine_restart("AHB error"); /* Catastrophic failure */
++
++    return IRQ_HANDLED;
++}
++
++static struct irqaction ar2315_ahb_proc_interrupt  = {
++	.handler	= ar2315_ahb_proc_handler,
++	.flags		= IRQF_DISABLED,
++	.name		= "ar2315_ahb_proc_interrupt",
++};
++
++static struct irqaction cascade  = {
++	.handler	= no_action,
++	.flags		= IRQF_DISABLED,
++	.name		= "cascade",
++};
++
++void
++ar2315_irq_init(void)
++{
++	int i;
++
++	ar231x_irq_dispatch = ar2315_irq_dispatch;
++	gpiointval = ar231x_read_reg(AR2315_GPIO_DI);
++	for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
++		int irq = AR531X_MISC_IRQ_BASE + i;
++		irq_desc[irq].status = IRQ_DISABLED;
++		irq_desc[irq].action = NULL;
++		irq_desc[irq].depth = 1;
++		irq_desc[irq].chip = &ar2315_misc_intr_controller;
++	}
++	for (i = 0; i < AR531X_GPIO_IRQ_COUNT; i++) {
++		int irq = AR531X_GPIO_IRQ_BASE + i;
++		irq_desc[irq].status = IRQ_DISABLED;
++		irq_desc[irq].action = NULL;
++		irq_desc[irq].depth = 1;
++		irq_desc[irq].chip = &ar2315_gpio_intr_controller;
++	}
++	setup_irq(AR531X_MISC_IRQ_GPIO, &cascade);
++	setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar2315_ahb_proc_interrupt);
++	setup_irq(AR2315_IRQ_MISC_INTRS, &cascade);
++}
++
++const struct ar231x_gpiodev ar2315_gpiodev;
++
++static u32
++ar2315_gpio_get_output(void)
++{
++	u32 reg;
++	reg = ar231x_read_reg(AR2315_GPIO_CR);
++	reg &= ar2315_gpiodev.valid_mask;
++	return reg;
++}
++
++static u32
++ar2315_gpio_set_output(u32 mask, u32 val)
++{
++	u32 reg;
++
++	reg = ar231x_read_reg(AR2315_GPIO_CR);
++	reg &= ~mask;
++	reg |= val;
++	ar231x_write_reg(AR2315_GPIO_CR, reg);
++	return reg;
++}
++
++static u32
++ar2315_gpio_get(void)
++{
++	u32 reg;
++	reg = ar231x_read_reg(AR2315_GPIO_DI);
++	reg &= ar2315_gpiodev.valid_mask;
++	return reg;
++}
++
++static u32
++ar2315_gpio_set(u32 mask, u32 value)
++{
++	u32 reg;
++	reg = ar231x_read_reg(AR2315_GPIO_DO);
++	reg &= ~mask;
++	reg |= value;
++	ar231x_write_reg(AR2315_GPIO_DO, reg);
++	return reg;
++}
++
++const struct ar231x_gpiodev ar2315_gpiodev = {
++	.valid_mask = (1 << 22) - 1,
++	.get_output = ar2315_gpio_get_output,
++	.set_output = ar2315_gpio_set_output,
++	.get = ar2315_gpio_get,
++	.set = ar2315_gpio_set,
++};
++
++static struct ar231x_eth ar2315_eth_data = {
++	.reset_base = AR2315_RESET,
++	.reset_mac = AR2315_RESET_ENET0,
++	.reset_phy = AR2315_RESET_EPHY0,
++	.phy_base = AR2315_ENET0,
++	.config = &ar231x_board,
++};
++
++static struct resource ar2315_spiflash_res[] = {
++	{
++		.name = "flash_base",
++		.flags = IORESOURCE_MEM,
++		.start = KSEG1ADDR(AR2315_SPI_READ),
++		.end = KSEG1ADDR(AR2315_SPI_READ) + 0x1000000 - 1,
++	},
++	{
++		.name = "flash_regs",
++		.flags = IORESOURCE_MEM,
++		.start = 0x11300000,
++		.end = 0x11300012,
++	},
++};
++
++static struct platform_device ar2315_spiflash = {
++	.id = 0,
++	.name = "spiflash",
++	.resource = ar2315_spiflash_res,
++	.num_resources = ARRAY_SIZE(ar2315_spiflash_res)
++};
++
++static struct platform_device ar2315_wdt = {
++	.id = 0,
++	.name = "ar2315_wdt",
++};
++
++#define SPI_FLASH_CTL      0x00
++#define SPI_FLASH_OPCODE   0x04
++#define SPI_FLASH_DATA     0x08
++
++static inline u32
++spiflash_read_reg(int reg)
++{
++	return ar231x_read_reg(KSEG1ADDR(AR2315_SPI) + reg);
++}
++
++static inline void
++spiflash_write_reg(int reg, u32 data)
++{
++	ar231x_write_reg(KSEG1ADDR(AR2315_SPI) + reg, data);
++}
++
++static u32
++spiflash_wait_status(void)
++{
++	u32 reg;
++
++	do {
++		reg = spiflash_read_reg(SPI_FLASH_CTL);
++	} while (reg & SPI_CTL_BUSY);
++
++	return reg;
++}
++
++static u8
++spiflash_probe(void)
++{
++	u32 reg;
++
++	reg = spiflash_wait_status();
++	reg &= ~SPI_CTL_TX_RX_CNT_MASK;
++	reg |= (1 << 4) | 4 | SPI_CTL_START;
++
++	spiflash_write_reg(SPI_FLASH_OPCODE, 0xab);
++	spiflash_write_reg(SPI_FLASH_CTL, reg);
++
++	reg = spiflash_wait_status();
++	reg = spiflash_read_reg(SPI_FLASH_DATA);
++	reg &= 0xff;
++
++	return (u8) reg;
++}
++
++
++#define STM_8MBIT_SIGNATURE     0x13
++#define STM_16MBIT_SIGNATURE    0x14
++#define STM_32MBIT_SIGNATURE    0x15
++#define STM_64MBIT_SIGNATURE    0x16
++#define STM_128MBIT_SIGNATURE   0x17
++
++static u8 __init *
++ar2315_flash_limit(void)
++{
++	u32 flash_size = 0;
++
++	/* probe the flash chip size */
++	switch(spiflash_probe()) {
++		case STM_8MBIT_SIGNATURE:
++			flash_size = 0x00100000;
++			break;
++		case STM_16MBIT_SIGNATURE:
++			flash_size = 0x00200000;
++			break;
++		case STM_32MBIT_SIGNATURE:
++			flash_size = 0x00400000;
++			break;
++		case STM_64MBIT_SIGNATURE:
++			flash_size = 0x00800000;
++			break;
++		case STM_128MBIT_SIGNATURE:
++			flash_size = 0x01000000;
++			break;
++	}
++
++	ar2315_spiflash_res[0].end = ar2315_spiflash_res[0].start +
++		flash_size - 1;
++	return (u8 *) ar2315_spiflash_res[0].end + 1;
++}
++
++#ifdef CONFIG_LEDS_GPIO
++static struct gpio_led ar2315_leds[6];
++static struct gpio_led_platform_data ar2315_led_data = {
++	.leds = (void *) ar2315_leds,
++};
++
++static struct platform_device ar2315_gpio_leds = {
++	.name = "leds-gpio",
++	.id = -1,
++	.dev = {
++		.platform_data = (void *) &ar2315_led_data,
++	}
++};
++
++static void __init
++ar2315_init_gpio(void)
++{
++	static char led_names[6][6];
++	int i, led = 0;
++
++	ar2315_led_data.num_leds = 0;
++	for(i = 1; i < 8; i++)
++	{
++		if((i == AR2315_RESET_GPIO) ||
++		   (i == ar231x_board.config->resetConfigGpio))
++			continue;
++
++		if(i == ar231x_board.config->sysLedGpio)
++			strcpy(led_names[led], "wlan");
++		else
++			sprintf(led_names[led], "gpio%d", i);
++
++		ar2315_leds[led].name = led_names[led];
++		ar2315_leds[led].gpio = i;
++		ar2315_leds[led].active_low = 0;
++		led++;
++	}
++	ar2315_led_data.num_leds = led;
++	platform_device_register(&ar2315_gpio_leds);
++}
++#else
++static inline void ar2315_init_gpio(void)
++{
++}
++#endif
++
++int __init
++ar2315_init_devices(void)
++{
++	if (!IS_2315())
++		return 0;
++
++	/* Find board configuration */
++	ar231x_find_config(ar2315_flash_limit());
++	ar2315_eth_data.macaddr = ar231x_board.config->enet0_mac;
++
++	ar2315_init_gpio();
++	platform_device_register(&ar2315_wdt);
++	platform_device_register(&ar2315_spiflash);
++	ar231x_add_ethernet(0, AR2315_ENET0, AR2315_IRQ_ENET0_INTRS,
++		&ar2315_eth_data);
++	ar231x_add_wmac(0, AR2315_WLAN0, AR2315_IRQ_WLAN0_INTRS);
++
++	return 0;
++}
++
++static void
++ar2315_restart(char *command)
++{
++	void (*mips_reset_vec)(void) = (void *) 0xbfc00000;
++
++	local_irq_disable();
++
++	/* try reset the system via reset control */
++	ar231x_write_reg(AR2315_COLD_RESET,AR2317_RESET_SYSTEM);
++
++	/* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround.
++	 * give it some time to attempt a gpio based hardware reset
++	 * (atheros reference design workaround) */
++	gpio_direction_output(AR2315_RESET_GPIO, 0);
++	mdelay(100);
++
++	/* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
++	 * workaround. Attempt to jump to the mips reset location -
++	 * the boot loader itself might be able to recover the system */
++	mips_reset_vec();
++}
++
++
++/*
++ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
++ * to determine the predevisor value.
++ */
++static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = {
++    1,
++    2,
++    4,
++    5
++};
++
++static int __initdata PLLC_DIVIDE_TABLE[5] = {
++    2,
++    3,
++    4,
++    6,
++    3
++};
++
++static unsigned int __init
++ar2315_sys_clk(unsigned int clockCtl)
++{
++    unsigned int pllcCtrl,cpuDiv;
++    unsigned int pllcOut,refdiv,fdiv,divby2;
++	unsigned int clkDiv;
++
++    pllcCtrl = ar231x_read_reg(AR2315_PLLC_CTL);
++    refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
++    refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv];
++    fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
++    divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
++    divby2 += 1;
++    pllcOut = (40000000/refdiv)*(2*divby2)*fdiv;
++
++
++    /* clkm input selected */
++	switch(clockCtl & CPUCLK_CLK_SEL_M) {
++		case 0:
++		case 1:
++			clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S];
++			break;
++		case 2:
++			clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S];
++			break;
++		default:
++			pllcOut = 40000000;
++			clkDiv = 1;
++			break;
++	}
++	cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;
++	cpuDiv = cpuDiv * 2 ?: 1;
++	return (pllcOut/(clkDiv * cpuDiv));
++}
++
++static inline unsigned int
++ar2315_cpu_frequency(void)
++{
++    return ar2315_sys_clk(ar231x_read_reg(AR2315_CPUCLK));
++}
++
++static inline unsigned int
++ar2315_apb_frequency(void)
++{
++    return ar2315_sys_clk(ar231x_read_reg(AR2315_AMBACLK));
++}
++
++void __init
++ar2315_time_init(void)
++{
++	mips_hpt_frequency = ar2315_cpu_frequency() / 2;
++}
++
++void __init
++ar2315_prom_init(void)
++{
++	u32 memsize, memcfg, devid;
++
++	if (!IS_2315())
++		return;
++
++	memcfg = ar231x_read_reg(AR2315_MEM_CFG);
++	memsize   = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S);
++	memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S);
++	memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S);
++	memsize <<= 3;
++	add_memory_region(0, memsize, BOOT_MEM_RAM);
++
++	/* Detect the hardware based on the device ID */
++	devid = ar231x_read_reg(AR2315_SREV) & AR2315_REV_CHIP;
++	switch(devid) {
++		case 0x90:
++		case 0x91:
++			ar231x_devtype = DEV_TYPE_AR2317;
++			break;
++		default:
++			ar231x_devtype = DEV_TYPE_AR2315;
++			break;
++	}
++	ar231x_gpiodev = &ar2315_gpiodev;
++	ar231x_board.devid = devid;
++}
++
++void __init
++ar2315_plat_setup(void)
++{
++	u32 config;
++
++	if (!IS_2315())
++		return;
++
++	/* Clear any lingering AHB errors */
++	config = read_c0_config();
++	write_c0_config(config & ~0x3);
++	ar231x_write_reg(AR2315_AHB_ERR0,AHB_ERROR_DET);
++	ar231x_read_reg(AR2315_AHB_ERR1);
++	ar231x_write_reg(AR2315_WDC, AR2315_WDC_IGNORE_EXPIRATION);
++
++	_machine_restart = ar2315_restart;
++	ar231x_serial_setup(KSEG1ADDR(AR2315_UART0), ar2315_apb_frequency());
++}
+--- /dev/null
++++ b/arch/mips/ar231x/ar2315.h
+@@ -0,0 +1,37 @@
++#ifndef __AR2315_H
++#define __AR2315_H
++
++#ifdef CONFIG_ATHEROS_AR2315
++
++extern void ar2315_irq_init(void);
++extern int ar2315_init_devices(void);
++extern void ar2315_prom_init(void);
++extern void ar2315_plat_setup(void);
++extern void ar2315_time_init(void);
++
++#else
++
++static inline void ar2315_irq_init(void)
++{
++}
++
++static inline int ar2315_init_devices(void)
++{
++	return 0;
++}
++
++static inline void ar2315_prom_init(void)
++{
++}
++
++static inline void ar2315_plat_setup(void)
++{
++}
++
++static inline void ar2315_time_init(void)
++{
++}
++
++#endif
++
++#endif
+--- /dev/null
++++ b/arch/mips/ar231x/ar5312.h
+@@ -0,0 +1,38 @@
++#ifndef __AR5312_H
++#define __AR5312_H
++
++#ifdef CONFIG_ATHEROS_AR5312
++
++extern void ar5312_irq_init(void);
++extern int ar5312_init_devices(void);
++extern void ar5312_prom_init(void);
++extern void ar5312_plat_setup(void);
++extern void ar5312_time_init(void);
++extern void ar5312_time_init(void);
++
++#else
++
++static inline void ar5312_irq_init(void)
++{
++}
++
++static inline int ar5312_init_devices(void)
++{
++	return 0;
++}
++
++static inline void ar5312_prom_init(void)
++{
++}
++
++static inline void ar5312_plat_setup(void)
++{
++}
++
++static inline void ar5312_time_init(void)
++{
++}
++
++#endif
++
++#endif
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/ar231x.h
+@@ -0,0 +1,54 @@
++#ifndef __AR531X_H
++#define __AR531X_H
++
++#define AR531X_MISC_IRQ_BASE		0x20
++#define AR531X_GPIO_IRQ_BASE		0x30
++
++/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
++#define AR531X_IRQ_NONE		MIPS_CPU_IRQ_BASE+0
++#define AR531X_IRQ_CPU_CLOCK	MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
++
++/* Miscellaneous interrupts, which share IP6 */
++#define AR531X_MISC_IRQ_NONE		AR531X_MISC_IRQ_BASE+0
++#define AR531X_MISC_IRQ_TIMER		AR531X_MISC_IRQ_BASE+1
++#define AR531X_MISC_IRQ_AHB_PROC	AR531X_MISC_IRQ_BASE+2
++#define AR531X_MISC_IRQ_AHB_DMA		AR531X_MISC_IRQ_BASE+3
++#define AR531X_MISC_IRQ_GPIO		AR531X_MISC_IRQ_BASE+4
++#define AR531X_MISC_IRQ_UART0		AR531X_MISC_IRQ_BASE+5
++#define AR531X_MISC_IRQ_UART0_DMA	AR531X_MISC_IRQ_BASE+6
++#define AR531X_MISC_IRQ_WATCHDOG	AR531X_MISC_IRQ_BASE+7
++#define AR531X_MISC_IRQ_LOCAL		AR531X_MISC_IRQ_BASE+8
++#define AR531X_MISC_IRQ_SPI 		AR531X_MISC_IRQ_BASE+9
++#define AR531X_MISC_IRQ_COUNT		10
++
++/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
++#define AR531X_GPIO_IRQ_NONE            AR531X_GPIO_IRQ_BASE+0
++#define AR531X_GPIO_IRQ(n)              AR531X_GPIO_IRQ_BASE+n
++#define AR531X_GPIO_IRQ_COUNT           22
++
++static inline u32
++ar231x_read_reg(u32 reg)
++{
++	return __raw_readl((u32 *) reg);
++}
++
++static inline void
++ar231x_write_reg(u32 reg, u32 val)
++{
++	__raw_writel(val, (u32 *)reg);
++}
++
++static inline u32
++ar231x_mask_reg(u32 reg, u32 mask, u32 val)
++{
++	u32 ret;
++
++	ret = ar231x_read_reg(reg);
++	ret &= ~mask;
++	ret |= val;
++	ar231x_write_reg(reg, ret);
++
++	return ret;
++}
++
++#endif
+--- /dev/null
++++ b/arch/mips/ar231x/devices.h
+@@ -0,0 +1,27 @@
++#ifndef __AR231X_DEVICES_H
++#define __AR231X_DEVICES_H
++
++enum {
++	/* handled by ar5312.c */
++	DEV_TYPE_AR2312,
++	DEV_TYPE_AR2313,
++	DEV_TYPE_AR5312,
++
++	/* handled by ar2315.c */
++	DEV_TYPE_AR2315,
++	DEV_TYPE_AR2316,
++	DEV_TYPE_AR2317,
++
++	DEV_TYPE_UNKNOWN
++};
++
++extern int ar231x_devtype;
++extern struct ar231x_board_config ar231x_board;
++extern void (*ar231x_irq_dispatch)(void);
++
++extern int ar231x_find_config(u8 *flash_limit);
++extern void ar231x_serial_setup(u32 mapbase, unsigned int uartclk);
++extern int ar231x_add_wmac(int nr, u32 base, int irq);
++extern int ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata);
++
++#endif
+--- /dev/null
++++ b/arch/mips/ar231x/devices.c
+@@ -0,0 +1,174 @@
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/serial.h>
++#include <linux/serial_core.h>
++#include <linux/serial_8250.h>
++#include <linux/platform_device.h>
++#include <ar231x_platform.h>
++#include <ar231x.h>
++#include "devices.h"
++#include "ar5312.h"
++#include "ar2315.h"
++
++struct ar231x_board_config ar231x_board;
++int ar231x_devtype = DEV_TYPE_UNKNOWN;
++const struct ar231x_gpiodev *ar231x_gpiodev;
++
++static struct resource ar231x_eth0_res[] = {
++	{
++		.name = "eth0_membase",
++		.flags = IORESOURCE_MEM,
++	},
++	{
++		.name = "eth0_irq",
++		.flags = IORESOURCE_IRQ,
++	}
++};
++
++static struct resource ar231x_eth1_res[] = {
++	{
++		.name = "eth1_membase",
++		.flags = IORESOURCE_MEM,
++	},
++	{
++		.name = "eth1_irq",
++		.flags = IORESOURCE_IRQ,
++	}
++};
++
++static struct platform_device ar231x_eth[] = {
++	{
++		.id = 0,
++		.name = "ar231x-eth",
++		.resource = ar231x_eth0_res,
++		.num_resources = ARRAY_SIZE(ar231x_eth0_res)
++	},
++	{
++		.id = 1,
++		.name = "ar231x-eth",
++		.resource = ar231x_eth1_res,
++		.num_resources = ARRAY_SIZE(ar231x_eth1_res)
++	}
++};
++
++static struct resource ar231x_wmac0_res[] = {
++	{
++		.name = "wmac0_membase",
++		.flags = IORESOURCE_MEM,
++	},
++	{
++		.name = "wmac0_irq",
++		.flags = IORESOURCE_IRQ,
++	}
++};
++
++static struct resource ar231x_wmac1_res[] = {
++	{
++		.name = "wmac1_membase",
++		.flags = IORESOURCE_MEM,
++	},
++	{
++		.name = "wmac1_irq",
++		.flags = IORESOURCE_IRQ,
++	}
++};
++
++
++static struct platform_device ar231x_wmac[] = {
++	{
++		.id = 0,
++		.name = "ar231x-wmac",
++		.resource = ar231x_wmac0_res,
++		.num_resources = ARRAY_SIZE(ar231x_wmac0_res),
++		.dev.platform_data = &ar231x_board,
++	},
++	{
++		.id = 1,
++		.name = "ar231x-wmac",
++		.resource = ar231x_wmac1_res,
++		.num_resources = ARRAY_SIZE(ar231x_wmac1_res),
++		.dev.platform_data = &ar231x_board,
++	},
++};
++
++static const char *devtype_strings[] = {
++	[DEV_TYPE_AR5312] = "Atheros AR5312",
++	[DEV_TYPE_AR2312] = "Atheros AR2312",
++	[DEV_TYPE_AR2313] = "Atheros AR2313",
++	[DEV_TYPE_AR2315] = "Atheros AR2315",
++	[DEV_TYPE_AR2316] = "Atheros AR2316",
++	[DEV_TYPE_AR2317] = "Atheros AR2317",
++	[DEV_TYPE_UNKNOWN] = "Atheros (unknown)",
++};
++
++const char *get_system_type(void)
++{
++	if ((ar231x_devtype >= ARRAY_SIZE(devtype_strings)) ||
++		!devtype_strings[ar231x_devtype])
++		return devtype_strings[DEV_TYPE_UNKNOWN];
++	return devtype_strings[ar231x_devtype];
++}
++
++
++int __init
++ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata)
++{
++	struct resource *res;
++
++	ar231x_eth[nr].dev.platform_data = pdata;
++	res = &ar231x_eth[nr].resource[0];
++	res->start = base;
++	res->end = base + 0x2000 - 1;
++	res++;
++	res->start = irq;
++	res->end = irq;
++	return platform_device_register(&ar231x_eth[nr]);
++}
++
++void __init
++ar231x_serial_setup(u32 mapbase, unsigned int uartclk)
++{
++	struct uart_port s;
++
++	memset(&s, 0, sizeof(s));
++
++	s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
++	s.iotype = UPIO_MEM;
++	s.irq = AR531X_MISC_IRQ_UART0;
++	s.regshift = 2;
++	s.mapbase = mapbase;
++	s.uartclk = uartclk;
++	s.membase = (void __iomem *)s.mapbase;
++
++	early_serial_setup(&s);
++}
++
++int __init
++ar231x_add_wmac(int nr, u32 base, int irq)
++{
++	struct resource *res;
++
++	ar231x_wmac[nr].dev.platform_data = &ar231x_board;
++	res = &ar231x_wmac[nr].resource[0];
++	res->start = base;
++	res->end = base + 0x10000 - 1;
++	res++;
++	res->start = irq;
++	res->end = irq;
++	return platform_device_register(&ar231x_wmac[nr]);
++}
++
++static int __init ar231x_register_devices(void)
++{
++	static struct resource res = {
++		.start = 0xFFFFFFFF,
++	};
++
++	platform_device_register_simple("GPIODEV", 0, &res, 1);
++	ar5312_init_devices();
++	ar2315_init_devices();
++
++	return 0;
++}
++
++device_initcall(ar231x_register_devices);
diff --git a/target/linux/atheros/patches-2.6.28/110-ar2313_ethernet.patch b/target/linux/atheros/patches-2.6.28/110-ar2313_ethernet.patch
new file mode 100644
index 0000000000..ea61bcd3e3
--- /dev/null
+++ b/target/linux/atheros/patches-2.6.28/110-ar2313_ethernet.patch
@@ -0,0 +1,1600 @@
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -359,6 +359,12 @@ config AX88796_93CX6
+ 	help
+ 	  Select this if your platform comes with an external 93CX6 eeprom.
+ 
++config AR231X_ETHERNET
++	tristate "AR231x Ethernet support"
++	depends on NET_ETHERNET && ATHEROS
++	help
++	  Support for the AR231x/531x ethernet controller
++
+ config MACE
+ 	tristate "MACE (Power Mac ethernet) support"
+ 	depends on PPC_PMAC && PPC32
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -199,6 +199,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o
+ obj-$(CONFIG_KORINA) += korina.o
+ obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
+ obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
++obj-$(CONFIG_AR231X_ETHERNET) += ar231x.o
+ obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
+ obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
+ obj-$(CONFIG_DECLANCE) += declance.o
+--- /dev/null
++++ b/drivers/net/ar231x.c
+@@ -0,0 +1,1267 @@
++/*
++ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device.
++ *
++ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++ *
++ * Thanks to Atheros for providing hardware and documentation
++ * enabling me to write this driver.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * Additional credits:
++ * 	This code is taken from John Taylor's Sibyte driver and then
++ * 	modified for the AR2313.
++ */
++
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/ioport.h>
++#include <linux/pci.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/skbuff.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/mm.h>
++#include <linux/highmem.h>
++#include <linux/sockios.h>
++#include <linux/pkt_sched.h>
++#include <linux/mii.h>
++#include <linux/phy.h>
++#include <linux/ethtool.h>
++#include <linux/ctype.h>
++#include <linux/platform_device.h>
++
++#include <net/sock.h>
++#include <net/ip.h>
++
++#include <asm/system.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/byteorder.h>
++#include <asm/uaccess.h>
++#include <asm/bootinfo.h>
++
++#define AR2313_MTU                     1692
++#define AR2313_PRIOS                   1
++#define AR2313_QUEUES                  (2*AR2313_PRIOS)
++#define AR2313_DESCR_ENTRIES           64
++
++
++#ifndef min
++#define min(a,b)	(((a)<(b))?(a):(b))
++#endif
++
++#ifndef SMP_CACHE_BYTES
++#define SMP_CACHE_BYTES	L1_CACHE_BYTES
++#endif
++
++#define AR2313_MBOX_SET_BIT  0x8
++
++#include "ar231x.h"
++
++/*
++ * New interrupt handler strategy:
++ *
++ * An old interrupt handler worked using the traditional method of
++ * replacing an skbuff with a new one when a packet arrives. However
++ * the rx rings do not need to contain a static number of buffer
++ * descriptors, thus it makes sense to move the memory allocation out
++ * of the main interrupt handler and do it in a bottom half handler
++ * and only allocate new buffers when the number of buffers in the
++ * ring is below a certain threshold. In order to avoid starving the
++ * NIC under heavy load it is however necessary to force allocation
++ * when hitting a minimum threshold. The strategy for alloction is as
++ * follows:
++ *
++ *     RX_LOW_BUF_THRES    - allocate buffers in the bottom half
++ *     RX_PANIC_LOW_THRES  - we are very low on buffers, allocate
++ *                           the buffers in the interrupt handler
++ *     RX_RING_THRES       - maximum number of buffers in the rx ring
++ *
++ * One advantagous side effect of this allocation approach is that the
++ * entire rx processing can be done without holding any spin lock
++ * since the rx rings and registers are totally independent of the tx
++ * ring and its registers.  This of course includes the kmalloc's of
++ * new skb's. Thus start_xmit can run in parallel with rx processing
++ * and the memory allocation on SMP systems.
++ *
++ * Note that running the skb reallocation in a bottom half opens up
++ * another can of races which needs to be handled properly. In
++ * particular it can happen that the interrupt handler tries to run
++ * the reallocation while the bottom half is either running on another
++ * CPU or was interrupted on the same CPU. To get around this the
++ * driver uses bitops to prevent the reallocation routines from being
++ * reentered.
++ *
++ * TX handling can also be done without holding any spin lock, wheee
++ * this is fun! since tx_csm is only written to by the interrupt
++ * handler.
++ */
++
++/*
++ * Threshold values for RX buffer allocation - the low water marks for
++ * when to start refilling the rings are set to 75% of the ring
++ * sizes. It seems to make sense to refill the rings entirely from the
++ * intrrupt handler once it gets below the panic threshold, that way
++ * we don't risk that the refilling is moved to another CPU when the
++ * one running the interrupt handler just got the slab code hot in its
++ * cache.
++ */
++#define RX_RING_SIZE		AR2313_DESCR_ENTRIES
++#define RX_PANIC_THRES	        (RX_RING_SIZE/4)
++#define RX_LOW_THRES	        ((3*RX_RING_SIZE)/4)
++#define CRC_LEN                 4
++#define RX_OFFSET               2
++
++#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
++#define VLAN_HDR                4
++#else
++#define VLAN_HDR                0
++#endif
++
++#define AR2313_BUFSIZE		(AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + RX_OFFSET)
++
++#ifdef MODULE
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>");
++MODULE_DESCRIPTION("AR231x Ethernet driver");
++#endif
++
++#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
++
++// prototypes
++static void ar231x_halt(struct net_device *dev);
++static void rx_tasklet_func(unsigned long data);
++static void rx_tasklet_cleanup(struct net_device *dev);
++static void ar231x_multicast_list(struct net_device *dev);
++
++static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
++static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
++static int ar231x_mdiobus_reset(struct mii_bus *bus);
++static int ar231x_mdiobus_probe (struct net_device *dev);
++static void ar231x_adjust_link(struct net_device *dev);
++
++#ifndef ERR
++#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
++#endif
++
++
++int __init ar231x_probe(struct platform_device *pdev)
++{
++	struct net_device *dev;
++	struct ar231x_private *sp;
++	struct resource *res;
++	unsigned long ar_eth_base;
++	char buf[64];
++
++	dev = alloc_etherdev(sizeof(struct ar231x_private));
++
++	if (dev == NULL) {
++		printk(KERN_ERR
++			   "ar231x: Unable to allocate net_device structure!\n");
++		return -ENOMEM;
++	}
++
++	platform_set_drvdata(pdev, dev);
++
++	sp = netdev_priv(dev);
++	sp->dev = dev;
++	sp->cfg = pdev->dev.platform_data;
++
++	sprintf(buf, "eth%d_membase", pdev->id);
++	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf);
++	if (!res)
++		return -ENODEV;
++
++	sp->link = 0;
++	ar_eth_base = res->start;
++
++	sprintf(buf, "eth%d_irq", pdev->id);
++	dev->irq = platform_get_irq_byname(pdev, buf);
++
++	spin_lock_init(&sp->lock);
++
++	/* initialize func pointers */
++	dev->open = &ar231x_open;
++	dev->stop = &ar231x_close;
++	dev->hard_start_xmit = &ar231x_start_xmit;
++
++	dev->set_multicast_list = &ar231x_multicast_list;
++	dev->do_ioctl = &ar231x_ioctl;
++
++	// SAMEER: do we need this?
++	dev->features |= NETIF_F_HIGHDMA;
++
++	tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
++	tasklet_disable(&sp->rx_tasklet);
++
++	sp->eth_regs =
++		ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs));
++	if (!sp->eth_regs) {
++		printk("Can't remap eth registers\n");
++		return (-ENXIO);
++	}
++
++	/*
++	 * When there's only one MAC, PHY regs are typically on ENET0,
++	 * even though the MAC might be on ENET1.
++	 * Needto remap PHY regs separately in this case
++	 */
++	if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs))
++		sp->phy_regs = sp->eth_regs;
++	else {
++		sp->phy_regs =
++			ioremap_nocache(virt_to_phys(sp->cfg->phy_base),
++							sizeof(*sp->phy_regs));
++		if (!sp->phy_regs) {
++			printk("Can't remap phy registers\n");
++			return (-ENXIO);
++		}
++	}
++
++	sp->dma_regs =
++		ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000),
++						sizeof(*sp->dma_regs));
++	dev->base_addr = (unsigned int) sp->dma_regs;
++	if (!sp->dma_regs) {
++		printk("Can't remap DMA registers\n");
++		return (-ENXIO);
++	}
++
++	sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4);
++	if (!sp->int_regs) {
++		printk("Can't remap INTERRUPT registers\n");
++		return (-ENXIO);
++	}
++
++	strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
++	sp->name[sizeof(sp->name) - 1] = '\0';
++	memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
++
++	if (ar231x_init(dev)) {
++		/*
++		 * ar231x_init() calls ar231x_init_cleanup() on error.
++		 */
++		kfree(dev);
++		return -ENODEV;
++	}
++
++	if (register_netdev(dev)) {
++		printk("%s: register_netdev failed\n", __func__);
++		return -1;
++	}
++
++	printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
++		   dev->name, sp->name,
++		   dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
++		   dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
++
++	sp->mii_bus = mdiobus_alloc();
++	if (sp->mii_bus == NULL)
++		return -1;
++
++	sp->mii_bus->priv = dev;
++	sp->mii_bus->read = ar231x_mdiobus_read;
++	sp->mii_bus->write = ar231x_mdiobus_write;
++	sp->mii_bus->reset = ar231x_mdiobus_reset;
++	sp->mii_bus->name = "ar231x_eth_mii";
++	snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "0");
++	sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL);
++	*sp->mii_bus->irq = PHY_POLL;
++
++	mdiobus_register(sp->mii_bus);
++
++	if (ar231x_mdiobus_probe(dev) != 0) {
++		printk(KERN_ERR "ar231x: mdiobus_probe failed");
++		rx_tasklet_cleanup(dev);
++		ar231x_init_cleanup(dev);
++		unregister_netdev(dev);
++		kfree(dev);
++	} else {
++		/* start link poll timer */
++		ar231x_setup_timer(dev);
++	}
++
++	return 0;
++}
++
++
++static void ar231x_multicast_list(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	unsigned int filter;
++
++	filter = sp->eth_regs->mac_control;
++
++	if (dev->flags & IFF_PROMISC)
++		filter |= MAC_CONTROL_PR;
++	else
++		filter &= ~MAC_CONTROL_PR;
++	if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 0))
++		filter |= MAC_CONTROL_PM;
++	else
++		filter &= ~MAC_CONTROL_PM;
++
++	sp->eth_regs->mac_control = filter;
++}
++
++static void rx_tasklet_cleanup(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++
++	/*
++	 * Tasklet may be scheduled. Need to get it removed from the list
++	 * since we're about to free the struct.
++	 */
++
++	sp->unloading = 1;
++	tasklet_enable(&sp->rx_tasklet);
++	tasklet_kill(&sp->rx_tasklet);
++}
++
++static int __exit ar231x_remove(struct platform_device *pdev)
++{
++	struct net_device *dev = platform_get_drvdata(pdev);
++	struct ar231x_private *sp = netdev_priv(dev);
++	rx_tasklet_cleanup(dev);
++	ar231x_init_cleanup(dev);
++	unregister_netdev(dev);
++	mdiobus_unregister(sp->mii_bus);
++	mdiobus_free(sp->mii_bus);
++	kfree(dev);
++	return 0;
++}
++
++
++/*
++ * Restart the AR2313 ethernet controller.
++ */
++static int ar231x_restart(struct net_device *dev)
++{
++	/* disable interrupts */
++	disable_irq(dev->irq);
++
++	/* stop mac */
++	ar231x_halt(dev);
++
++	/* initialize */
++	ar231x_init(dev);
++
++	/* enable interrupts */
++	enable_irq(dev->irq);
++
++	return 0;
++}
++
++static struct platform_driver ar231x_driver = {
++	.driver.name = "ar231x-eth",
++	.probe = ar231x_probe,
++	.remove = ar231x_remove,
++};
++
++int __init ar231x_module_init(void)
++{
++	return platform_driver_register(&ar231x_driver);
++}
++
++void __exit ar231x_module_cleanup(void)
++{
++	platform_driver_unregister(&ar231x_driver);
++}
++
++module_init(ar231x_module_init);
++module_exit(ar231x_module_cleanup);
++
++
++static void ar231x_free_descriptors(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	if (sp->rx_ring != NULL) {
++		kfree((void *) KSEG0ADDR(sp->rx_ring));
++		sp->rx_ring = NULL;
++		sp->tx_ring = NULL;
++	}
++}
++
++
++static int ar231x_allocate_descriptors(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	int size;
++	int j;
++	ar231x_descr_t *space;
++
++	if (sp->rx_ring != NULL) {
++		printk("%s: already done.\n", __FUNCTION__);
++		return 0;
++	}
++
++	size =
++		(sizeof(ar231x_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
++	space = kmalloc(size, GFP_KERNEL);
++	if (space == NULL)
++		return 1;
++
++	/* invalidate caches */
++	dma_cache_inv((unsigned int) space, size);
++
++	/* now convert pointer to KSEG1 */
++	space = (ar231x_descr_t *) KSEG1ADDR(space);
++
++	memset((void *) space, 0, size);
++
++	sp->rx_ring = space;
++	space += AR2313_DESCR_ENTRIES;
++
++	sp->tx_ring = space;
++	space += AR2313_DESCR_ENTRIES;
++
++	/* Initialize the transmit Descriptors */
++	for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++		ar231x_descr_t *td = &sp->tx_ring[j];
++		td->status = 0;
++		td->devcs = DMA_TX1_CHAINED;
++		td->addr = 0;
++		td->descr =
++			virt_to_phys(&sp->
++						 tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]);
++	}
++
++	return 0;
++}
++
++
++/*
++ * Generic cleanup handling data allocated during init. Used when the
++ * module is unloaded or if an error occurs during initialization
++ */
++static void ar231x_init_cleanup(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	struct sk_buff *skb;
++	int j;
++
++	ar231x_free_descriptors(dev);
++
++	if (sp->eth_regs)
++		iounmap((void *) sp->eth_regs);
++	if (sp->dma_regs)
++		iounmap((void *) sp->dma_regs);
++
++	if (sp->rx_skb) {
++		for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++			skb = sp->rx_skb[j];
++			if (skb) {
++				sp->rx_skb[j] = NULL;
++				dev_kfree_skb(skb);
++			}
++		}
++		kfree(sp->rx_skb);
++		sp->rx_skb = NULL;
++	}
++
++	if (sp->tx_skb) {
++		for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++			skb = sp->tx_skb[j];
++			if (skb) {
++				sp->tx_skb[j] = NULL;
++				dev_kfree_skb(skb);
++			}
++		}
++		kfree(sp->tx_skb);
++		sp->tx_skb = NULL;
++	}
++}
++
++static int ar231x_setup_timer(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++
++	init_timer(&sp->link_timer);
++
++	sp->link_timer.function = ar231x_link_timer_fn;
++	sp->link_timer.data = (int) dev;
++	sp->link_timer.expires = jiffies + HZ;
++
++	add_timer(&sp->link_timer);
++	return 0;
++
++}
++
++static void ar231x_link_timer_fn(unsigned long data)
++{
++	struct net_device *dev = (struct net_device *) data;
++	struct ar231x_private *sp = netdev_priv(dev);
++
++	// see if the link status changed
++	// This was needed to make sure we set the PHY to the
++	// autonegotiated value of half or full duplex.
++	ar231x_check_link(dev);
++
++	// Loop faster when we don't have link.
++	// This was needed to speed up the AP bootstrap time.
++	if (sp->link == 0) {
++		mod_timer(&sp->link_timer, jiffies + HZ / 2);
++	} else {
++		mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
++	}
++}
++
++static void ar231x_check_link(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	u16 phyData;
++
++	phyData = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR);
++	if (sp->phyData != phyData) {
++		if (phyData & BMSR_LSTATUS) {
++			/* link is present, ready link partner ability to deterine
++			   duplexity */
++			int duplex = 0;
++			u16 reg;
++
++			sp->link = 1;
++			reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMCR);
++			if (reg & BMCR_ANENABLE) {
++				/* auto neg enabled */
++				reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_LPA);
++				duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
++			} else {
++				/* no auto neg, just read duplex config */
++				duplex = (reg & BMCR_FULLDPLX) ? 1 : 0;
++			}
++
++			printk(KERN_INFO "%s: Configuring MAC for %s duplex\n",
++				   dev->name, (duplex) ? "full" : "half");
++
++			if (duplex) {
++				/* full duplex */
++				sp->eth_regs->mac_control =
++					((sp->eth_regs->
++					  mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO);
++			} else {
++				/* half duplex */
++				sp->eth_regs->mac_control =
++					((sp->eth_regs->
++					  mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F);
++			}
++		} else {
++			/* no link */
++			sp->link = 0;
++		}
++		sp->phyData = phyData;
++	}
++}
++
++static int ar231x_reset_reg(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	unsigned int ethsal, ethsah;
++	unsigned int flags;
++
++	*sp->int_regs |= sp->cfg->reset_mac;
++	mdelay(10);
++	*sp->int_regs &= ~sp->cfg->reset_mac;
++	mdelay(10);
++	*sp->int_regs |= sp->cfg->reset_phy;
++	mdelay(10);
++	*sp->int_regs &= ~sp->cfg->reset_phy;
++	mdelay(10);
++
++	sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
++	mdelay(10);
++	sp->dma_regs->bus_mode =
++		((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
++
++	/* enable interrupts */
++	sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
++							  DMA_STATUS_NIS |
++							  DMA_STATUS_RI |
++							  DMA_STATUS_TI | DMA_STATUS_FBE);
++	sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring);
++	sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring);
++	sp->dma_regs->control =
++		(DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
++
++	sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
++	sp->eth_regs->vlan_tag = (0x8100);
++
++	/* Enable Ethernet Interface */
++	flags = (MAC_CONTROL_TE |	/* transmit enable */
++			 MAC_CONTROL_PM |	/* pass mcast */
++			 MAC_CONTROL_F |	/* full duplex */
++			 MAC_CONTROL_HBD);	/* heart beat disabled */
++
++	if (dev->flags & IFF_PROMISC) {	/* set promiscuous mode */
++		flags |= MAC_CONTROL_PR;
++	}
++	sp->eth_regs->mac_control = flags;
++
++	/* Set all Ethernet station address registers to their initial values */
++	ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
++			  (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
++
++	ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
++			  (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
++			  (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
++			  (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
++
++	sp->eth_regs->mac_addr[0] = ethsah;
++	sp->eth_regs->mac_addr[1] = ethsal;
++
++	mdelay(10);
++
++	return (0);
++}
++
++
++static int ar231x_init(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	int ecode = 0;
++
++	/*
++	 * Allocate descriptors
++	 */
++	if (ar231x_allocate_descriptors(dev)) {
++		printk("%s: %s: ar231x_allocate_descriptors failed\n",
++			   dev->name, __FUNCTION__);
++		ecode = -EAGAIN;
++		goto init_error;
++	}
++
++	/*
++	 * Get the memory for the skb rings.
++	 */
++	if (sp->rx_skb == NULL) {
++		sp->rx_skb =
++			kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
++					GFP_KERNEL);
++		if (!(sp->rx_skb)) {
++			printk("%s: %s: rx_skb kmalloc failed\n",
++				   dev->name, __FUNCTION__);
++			ecode = -EAGAIN;
++			goto init_error;
++		}
++	}
++	memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
++
++	if (sp->tx_skb == NULL) {
++		sp->tx_skb =
++			kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
++					GFP_KERNEL);
++		if (!(sp->tx_skb)) {
++			printk("%s: %s: tx_skb kmalloc failed\n",
++				   dev->name, __FUNCTION__);
++			ecode = -EAGAIN;
++			goto init_error;
++		}
++	}
++	memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
++
++	/*
++	 * Set tx_csm before we start receiving interrupts, otherwise
++	 * the interrupt handler might think it is supposed to process
++	 * tx ints before we are up and running, which may cause a null
++	 * pointer access in the int handler.
++	 */
++	sp->rx_skbprd = 0;
++	sp->cur_rx = 0;
++	sp->tx_prd = 0;
++	sp->tx_csm = 0;
++
++	/*
++	 * Zero the stats before starting the interface
++	 */
++	memset(&dev->stats, 0, sizeof(dev->stats));
++
++	/*
++	 * We load the ring here as there seem to be no way to tell the
++	 * firmware to wipe the ring without re-initializing it.
++	 */
++	ar231x_load_rx_ring(dev, RX_RING_SIZE);
++
++	/*
++	 * Init hardware
++	 */
++	ar231x_reset_reg(dev);
++
++	/*
++	 * Get the IRQ
++	 */
++	ecode =
++		request_irq(dev->irq, &ar231x_interrupt,
++					IRQF_SHARED | IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
++					dev->name, dev);
++	if (ecode) {
++		printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
++			   dev->name, __FUNCTION__, dev->irq);
++		goto init_error;
++	}
++
++
++	tasklet_enable(&sp->rx_tasklet);
++
++	return 0;
++
++  init_error:
++	ar231x_init_cleanup(dev);
++	return ecode;
++}
++
++/*
++ * Load the rx ring.
++ *
++ * Loading rings is safe without holding the spin lock since this is
++ * done only before the device is enabled, thus no interrupts are
++ * generated and by the interrupt handler/tasklet handler.
++ */
++static void ar231x_load_rx_ring(struct net_device *dev, int nr_bufs)
++{
++
++	struct ar231x_private *sp = netdev_priv(dev);
++	short i, idx;
++
++	idx = sp->rx_skbprd;
++
++	for (i = 0; i < nr_bufs; i++) {
++		struct sk_buff *skb;
++		ar231x_descr_t *rd;
++
++		if (sp->rx_skb[idx])
++			break;
++
++		// partha: create additional room for the second GRE fragment
++		skb = alloc_skb(AR2313_BUFSIZE + 128, GFP_ATOMIC);
++		if (!skb) {
++			printk("\n\n\n\n %s: No memory in system\n\n\n\n",
++				   __FUNCTION__);
++			break;
++		}
++		// partha: create additional room in the front for tx pkt capture
++		skb_reserve(skb, 32);
++
++		/*
++		 * Make sure IP header starts on a fresh cache line.
++		 */
++		skb->dev = dev;
++		skb_reserve(skb, RX_OFFSET);
++		sp->rx_skb[idx] = skb;
++
++		rd = (ar231x_descr_t *) & sp->rx_ring[idx];
++
++		/* initialize dma descriptor */
++		rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
++					 DMA_RX1_CHAINED);
++		rd->addr = virt_to_phys(skb->data);
++		rd->descr =
++			virt_to_phys(&sp->
++						 rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]);
++		rd->status = DMA_RX_OWN;
++
++		idx = DSC_NEXT(idx);
++	}
++
++	if (i)
++		sp->rx_skbprd = idx;
++
++	return;
++}
++
++#define AR2313_MAX_PKTS_PER_CALL        64
++
++static int ar231x_rx_int(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	struct sk_buff *skb, *skb_new;
++	ar231x_descr_t *rxdesc;
++	unsigned int status;
++	u32 idx;
++	int pkts = 0;
++	int rval;
++
++	idx = sp->cur_rx;
++
++	/* process at most the entire ring and then wait for another interrupt
++	 */
++	while (1) {
++
++		rxdesc = &sp->rx_ring[idx];
++		status = rxdesc->status;
++		if (status & DMA_RX_OWN) {
++			/* SiByte owns descriptor or descr not yet filled in */
++			rval = 0;
++			break;
++		}
++
++		if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
++			rval = 1;
++			break;
++		}
++
++		if ((status & (DMA_RX_ERROR | DMA_RX_ERR_LENGTH)) &&
++			(!(status & DMA_RX_LONG))) {
++			dev->stats.rx_errors++;
++			dev->stats.rx_dropped++;
++
++			/* add statistics counters */
++			if (status & DMA_RX_ERR_CRC)
++				dev->stats.rx_crc_errors++;
++			if (status & DMA_RX_ERR_COL)
++				dev->stats.rx_over_errors++;
++			if (status & DMA_RX_ERR_LENGTH)
++				dev->stats.rx_length_errors++;
++			if (status & DMA_RX_ERR_RUNT)
++				dev->stats.rx_over_errors++;
++			if (status & DMA_RX_ERR_DESC)
++				dev->stats.rx_over_errors++;
++
++		} else {
++			/* alloc new buffer. */
++			skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128);
++			if (skb_new != NULL) {
++
++				skb = sp->rx_skb[idx];
++				/* set skb */
++				skb_put(skb,
++						((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
++
++				dev->stats.rx_bytes += skb->len;
++				skb->protocol = eth_type_trans(skb, dev);
++				/* pass the packet to upper layers */
++				netif_rx(skb);
++
++				skb_new->dev = dev;
++				/* 16 bit align */
++				skb_reserve(skb_new, RX_OFFSET + 32);
++				/* reset descriptor's curr_addr */
++				rxdesc->addr = virt_to_phys(skb_new->data);
++
++				dev->stats.rx_packets++;
++				sp->rx_skb[idx] = skb_new;
++			} else {
++				dev->stats.rx_dropped++;
++			}
++		}
++
++		rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
++						 DMA_RX1_CHAINED);
++		rxdesc->status = DMA_RX_OWN;
++
++		idx = DSC_NEXT(idx);
++	}
++
++	sp->cur_rx = idx;
++
++	return rval;
++}
++
++
++static void ar231x_tx_int(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	u32 idx;
++	struct sk_buff *skb;
++	ar231x_descr_t *txdesc;
++	unsigned int status = 0;
++
++	idx = sp->tx_csm;
++
++	while (idx != sp->tx_prd) {
++		txdesc = &sp->tx_ring[idx];
++
++		if ((status = txdesc->status) & DMA_TX_OWN) {
++			/* ar231x dma still owns descr */
++			break;
++		}
++		/* done with this descriptor */
++		dma_unmap_single(NULL, txdesc->addr,
++						 txdesc->devcs & DMA_TX1_BSIZE_MASK,
++						 DMA_TO_DEVICE);
++		txdesc->status = 0;
++
++		if (status & DMA_TX_ERROR) {
++			dev->stats.tx_errors++;
++			dev->stats.tx_dropped++;
++			if (status & DMA_TX_ERR_UNDER)
++				dev->stats.tx_fifo_errors++;
++			if (status & DMA_TX_ERR_HB)
++				dev->stats.tx_heartbeat_errors++;
++			if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK))
++				dev->stats.tx_carrier_errors++;
++			if (status & (DMA_TX_ERR_LATE |
++						  DMA_TX_ERR_COL |
++						  DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER))
++				dev->stats.tx_aborted_errors++;
++		} else {
++			/* transmit OK */
++			dev->stats.tx_packets++;
++		}
++
++		skb = sp->tx_skb[idx];
++		sp->tx_skb[idx] = NULL;
++		idx = DSC_NEXT(idx);
++		dev->stats.tx_bytes += skb->len;
++		dev_kfree_skb_irq(skb);
++	}
++
++	sp->tx_csm = idx;
++
++	return;
++}
++
++
++static void rx_tasklet_func(unsigned long data)
++{
++	struct net_device *dev = (struct net_device *) data;
++	struct ar231x_private *sp = netdev_priv(dev);
++
++	if (sp->unloading) {
++		return;
++	}
++
++	if (ar231x_rx_int(dev)) {
++		tasklet_hi_schedule(&sp->rx_tasklet);
++	} else {
++		unsigned long flags;
++		spin_lock_irqsave(&sp->lock, flags);
++		sp->dma_regs->intr_ena |= DMA_STATUS_RI;
++		spin_unlock_irqrestore(&sp->lock, flags);
++	}
++}
++
++static void rx_schedule(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++
++	sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
++
++	tasklet_hi_schedule(&sp->rx_tasklet);
++}
++
++static irqreturn_t ar231x_interrupt(int irq, void *dev_id)
++{
++	struct net_device *dev = (struct net_device *) dev_id;
++	struct ar231x_private *sp = netdev_priv(dev);
++	unsigned int status, enabled;
++
++	/* clear interrupt */
++	/*
++	 * Don't clear RI bit if currently disabled.
++	 */
++	status = sp->dma_regs->status;
++	enabled = sp->dma_regs->intr_ena;
++	sp->dma_regs->status = status & enabled;
++
++	if (status & DMA_STATUS_NIS) {
++		/* normal status */
++		/*
++		 * Don't schedule rx processing if interrupt
++		 * is already disabled.
++		 */
++		if (status & enabled & DMA_STATUS_RI) {
++			/* receive interrupt */
++			rx_schedule(dev);
++		}
++		if (status & DMA_STATUS_TI) {
++			/* transmit interrupt */
++			ar231x_tx_int(dev);
++		}
++	}
++
++	/* abnormal status */
++	if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
++		ar231x_restart(dev);
++	}
++	return IRQ_HANDLED;
++}
++
++
++static int ar231x_open(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	unsigned int ethsal, ethsah;
++
++	/* reset the hardware, in case the MAC address changed */
++	ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
++			  (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
++
++	ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
++			  (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
++			  (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
++			  (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
++
++	sp->eth_regs->mac_addr[0] = ethsah;
++	sp->eth_regs->mac_addr[1] = ethsal;
++
++	mdelay(10);
++
++	dev->mtu = 1500;
++	netif_start_queue(dev);
++
++	sp->eth_regs->mac_control |= MAC_CONTROL_RE;
++
++	return 0;
++}
++
++static void ar231x_halt(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	int j;
++
++	tasklet_disable(&sp->rx_tasklet);
++
++	/* kill the MAC */
++	sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE |	/* disable Receives */
++								   MAC_CONTROL_TE);	/* disable Transmits */
++	/* stop dma */
++	sp->dma_regs->control = 0;
++	sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
++
++	/* place phy and MAC in reset */
++	*sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy);
++
++	/* free buffers on tx ring */
++	for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
++		struct sk_buff *skb;
++		ar231x_descr_t *txdesc;
++
++		txdesc = &sp->tx_ring[j];
++		txdesc->descr = 0;
++
++		skb = sp->tx_skb[j];
++		if (skb) {
++			dev_kfree_skb(skb);
++			sp->tx_skb[j] = NULL;
++		}
++	}
++}
++
++/*
++ * close should do nothing. Here's why. It's called when
++ * 'ifconfig bond0 down' is run. If it calls free_irq then
++ * the irq is gone forever ! When bond0 is made 'up' again,
++ * the ar231x_open () does not call request_irq (). Worse,
++ * the call to ar231x_halt() generates a WDOG reset due to
++ * the write to 'sp->int_regs' and the box reboots.
++ * Commenting this out is good since it allows the
++ * system to resume when bond0 is made up again.
++ */
++static int ar231x_close(struct net_device *dev)
++{
++#if 0
++	/*
++	 * Disable interrupts
++	 */
++	disable_irq(dev->irq);
++
++	/*
++	 * Without (or before) releasing irq and stopping hardware, this
++	 * is an absolute non-sense, by the way. It will be reset instantly
++	 * by the first irq.
++	 */
++	netif_stop_queue(dev);
++
++	/* stop the MAC and DMA engines */
++	ar231x_halt(dev);
++
++	/* release the interrupt */
++	free_irq(dev->irq, dev);
++
++#endif
++	return 0;
++}
++
++static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	ar231x_descr_t *td;
++	u32 idx;
++
++	idx = sp->tx_prd;
++	td = &sp->tx_ring[idx];
++
++	if (td->status & DMA_TX_OWN) {
++		/* free skbuf and lie to the caller that we sent it out */
++		dev->stats.tx_dropped++;
++		dev_kfree_skb(skb);
++
++		/* restart transmitter in case locked */
++		sp->dma_regs->xmt_poll = 0;
++		return 0;
++	}
++
++	/* Setup the transmit descriptor. */
++	td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
++				 (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED));
++	td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
++	td->status = DMA_TX_OWN;
++
++	/* kick transmitter last */
++	sp->dma_regs->xmt_poll = 0;
++
++	sp->tx_skb[idx] = skb;
++	idx = DSC_NEXT(idx);
++	sp->tx_prd = idx;
++
++	return 0;
++}
++
++static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
++{
++	struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
++	struct ar231x_private *sp = netdev_priv(dev);
++	int ret;
++
++	switch (cmd) {
++
++	case SIOCETHTOOL:
++		spin_lock_irq(&sp->lock);
++		ret = phy_ethtool_ioctl(sp->phy_dev, (void *) ifr->ifr_data);
++		spin_unlock_irq(&sp->lock);
++		return ret;
++
++	case SIOCSIFHWADDR:
++		if (copy_from_user
++			(dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
++			return -EFAULT;
++		return 0;
++
++	case SIOCGIFHWADDR:
++		if (copy_to_user
++			(ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
++			return -EFAULT;
++		return 0;
++
++	case SIOCGMIIPHY:
++	case SIOCGMIIREG:
++	case SIOCSMIIREG:
++		return phy_mii_ioctl(sp->phy_dev, data, cmd);
++
++	default:
++		break;
++	}
++
++	return -EOPNOTSUPP;
++}
++
++static void ar231x_adjust_link(struct net_device *dev)
++{
++	struct ar231x_private *sp = netdev_priv(dev);
++	unsigned int mc;
++
++	if (!sp->phy_dev->link)
++		return;
++
++	if (sp->phy_dev->duplex != sp->oldduplex) {
++		mc = readl(&sp->eth_regs->mac_control);
++		mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO);
++		if (sp->phy_dev->duplex)
++			mc |= MAC_CONTROL_F;
++		else
++			mc |= MAC_CONTROL_DRO;
++		writel(mc, &sp->eth_regs->mac_control);
++		sp->oldduplex = sp->phy_dev->duplex;
++	}
++}
++
++#define MII_ADDR(phy, reg) \
++	((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
++
++static int
++ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
++{
++	struct net_device *const dev = bus->priv;
++	struct ar231x_private *sp = netdev_priv(dev);
++	volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
++
++	ethernet->mii_addr = MII_ADDR(phy_addr, regnum);
++	while (ethernet->mii_addr & MII_ADDR_BUSY);
++	return (ethernet->mii_data >> MII_DATA_SHIFT);
++}
++
++static int
++ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
++             u16 value)
++{
++	struct net_device *const dev = bus->priv;
++	struct ar231x_private *sp = netdev_priv(dev);
++	volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
++
++	while (ethernet->mii_addr & MII_ADDR_BUSY);
++	ethernet->mii_data = value << MII_DATA_SHIFT;
++	ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE;
++
++	return 0;
++}
++
++static int ar231x_mdiobus_reset(struct mii_bus *bus)
++{
++	struct net_device *const dev = bus->priv;
++
++	ar231x_reset_reg(dev);
++
++	return 0;
++}
++
++static int ar231x_mdiobus_probe (struct net_device *dev)
++{
++	struct ar231x_private *const sp = netdev_priv(dev);
++	struct phy_device *phydev = NULL;
++	int phy_addr;
++
++	/* find the first (lowest address) PHY on the current MAC's MII bus */
++	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
++		if (sp->mii_bus->phy_map[phy_addr]) {
++			phydev = sp->mii_bus->phy_map[phy_addr];
++			sp->phy = phy_addr;
++			break; /* break out with first one found */
++		}
++
++	if (!phydev) {
++		printk (KERN_ERR "ar231x: %s: no PHY found\n", dev->name);
++		return -1;
++	}
++
++	/* now we are supposed to have a proper phydev, to attach to... */
++	BUG_ON(!phydev);
++	BUG_ON(phydev->attached_dev);
++
++	phydev = phy_connect(dev, phydev->dev.bus_id, &ar231x_adjust_link, 0,
++		PHY_INTERFACE_MODE_MII);
++
++	if (IS_ERR(phydev)) {
++		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
++		return PTR_ERR(phydev);
++	}
++
++	/* mask with MAC supported features */
++	phydev->supported &= (SUPPORTED_10baseT_Half
++		| SUPPORTED_10baseT_Full
++		| SUPPORTED_100baseT_Half
++		| SUPPORTED_100baseT_Full
++		| SUPPORTED_Autoneg
++		/* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
++		| SUPPORTED_MII
++		| SUPPORTED_TP);
++
++	phydev->advertising = phydev->supported;
++
++	sp->oldduplex = -1;
++	sp->phy_dev = phydev;
++
++	printk(KERN_INFO "%s: attached PHY driver [%s] "
++		"(mii_bus:phy_addr=%s)\n",
++		dev->name, phydev->drv->name, phydev->dev.bus_id);
++
++	return 0;
++}
++
+--- /dev/null
++++ b/drivers/net/ar231x.h
+@@ -0,0 +1,302 @@
++/*
++ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device.
++ *
++ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++ *
++ * Thanks to Atheros for providing hardware and documentation
++ * enabling me to write this driver.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef _AR2313_H_
++#define _AR2313_H_
++
++#include <linux/autoconf.h>
++#include <linux/bitops.h>
++#include <asm/bootinfo.h>
++#include <ar231x_platform.h>
++
++/*
++ * probe link timer - 5 secs
++ */
++#define LINK_TIMER    (5*HZ)
++
++#define IS_DMA_TX_INT(X)   (((X) & (DMA_STATUS_TI)) != 0)
++#define IS_DMA_RX_INT(X)   (((X) & (DMA_STATUS_RI)) != 0)
++#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN))    == 0)
++
++#define AR2313_TX_TIMEOUT (HZ/4)
++
++/*
++ * Rings
++ */
++#define DSC_RING_ENTRIES_SIZE	(AR2313_DESCR_ENTRIES * sizeof(struct desc))
++#define DSC_NEXT(idx)	        ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
++
++#define AR2313_MBGET		2
++#define AR2313_MBSET		3
++#define AR2313_PCI_RECONFIG	4
++#define AR2313_PCI_DUMP		5
++#define AR2313_TEST_PANIC	6
++#define AR2313_TEST_NULLPTR	7
++#define AR2313_READ_DATA	8
++#define AR2313_WRITE_DATA	9
++#define AR2313_GET_VERSION	10
++#define AR2313_TEST_HANG	11
++#define AR2313_SYNC		12
++
++#define DMA_RX_ERR_CRC		BIT(1)
++#define DMA_RX_ERR_DRIB		BIT(2)
++#define DMA_RX_ERR_MII		BIT(3)
++#define DMA_RX_EV2		BIT(5)
++#define DMA_RX_ERR_COL		BIT(6)
++#define DMA_RX_LONG		BIT(7)
++#define DMA_RX_LS		BIT(8)	/* last descriptor */
++#define DMA_RX_FS		BIT(9)	/* first descriptor */
++#define DMA_RX_MF		BIT(10)	/* multicast frame */
++#define DMA_RX_ERR_RUNT		BIT(11)	/* runt frame */
++#define DMA_RX_ERR_LENGTH	BIT(12)	/* length error */
++#define DMA_RX_ERR_DESC		BIT(14)	/* descriptor error */
++#define DMA_RX_ERROR		BIT(15)	/* error summary */
++#define DMA_RX_LEN_MASK		0x3fff0000
++#define DMA_RX_LEN_SHIFT	16
++#define DMA_RX_FILT		BIT(30)
++#define DMA_RX_OWN		BIT(31)	/* desc owned by DMA controller */
++
++#define DMA_RX1_BSIZE_MASK	0x000007ff
++#define DMA_RX1_BSIZE_SHIFT	0
++#define DMA_RX1_CHAINED		BIT(24)
++#define DMA_RX1_RER		BIT(25)
++
++#define DMA_TX_ERR_UNDER	BIT(1)	/* underflow error */
++#define DMA_TX_ERR_DEFER	BIT(2)	/* excessive deferral */
++#define DMA_TX_COL_MASK		0x78
++#define DMA_TX_COL_SHIFT	3
++#define DMA_TX_ERR_HB		BIT(7)	/* hearbeat failure */
++#define DMA_TX_ERR_COL		BIT(8)	/* excessive collisions */
++#define DMA_TX_ERR_LATE		BIT(9)	/* late collision */
++#define DMA_TX_ERR_LINK		BIT(10)	/* no carrier */
++#define DMA_TX_ERR_LOSS		BIT(11)	/* loss of carrier */
++#define DMA_TX_ERR_JABBER	BIT(14)	/* transmit jabber timeout */
++#define DMA_TX_ERROR		BIT(15)	/* frame aborted */
++#define DMA_TX_OWN		BIT(31)	/* descr owned by DMA controller */
++
++#define DMA_TX1_BSIZE_MASK	0x000007ff
++#define DMA_TX1_BSIZE_SHIFT	0
++#define DMA_TX1_CHAINED		BIT(24)	/* chained descriptors */
++#define DMA_TX1_TER		BIT(25)	/* transmit end of ring */
++#define DMA_TX1_FS		BIT(29)	/* first segment */
++#define DMA_TX1_LS		BIT(30)	/* last segment */
++#define DMA_TX1_IC		BIT(31)	/* interrupt on completion */
++
++#define RCVPKT_LENGTH(X)	(X  >> 16)	/* Received pkt Length */
++
++#define MAC_CONTROL_RE		BIT(2)	/* receive enable */
++#define MAC_CONTROL_TE		BIT(3)	/* transmit enable */
++#define MAC_CONTROL_DC		BIT(5)	/* Deferral check */
++#define MAC_CONTROL_ASTP	BIT(8)	/* Auto pad strip */
++#define MAC_CONTROL_DRTY	BIT(10)	/* Disable retry */
++#define MAC_CONTROL_DBF		BIT(11)	/* Disable bcast frames */
++#define MAC_CONTROL_LCC		BIT(12)	/* late collision ctrl */
++#define MAC_CONTROL_HP		BIT(13)	/* Hash Perfect filtering */
++#define MAC_CONTROL_HASH	BIT(14)	/* Unicast hash filtering */
++#define MAC_CONTROL_HO		BIT(15)	/* Hash only filtering */
++#define MAC_CONTROL_PB		BIT(16)	/* Pass Bad frames */
++#define MAC_CONTROL_IF		BIT(17)	/* Inverse filtering */
++#define MAC_CONTROL_PR		BIT(18)	/* promiscuous mode (valid frames only) */
++#define MAC_CONTROL_PM		BIT(19)	/* pass multicast */
++#define MAC_CONTROL_F		BIT(20)	/* full-duplex */
++#define MAC_CONTROL_DRO		BIT(23)	/* Disable Receive Own */
++#define MAC_CONTROL_HBD		BIT(28)	/* heart-beat disabled (MUST BE SET) */
++#define MAC_CONTROL_BLE		BIT(30)	/* big endian mode */
++#define MAC_CONTROL_RA		BIT(31)	/* receive all (valid and invalid frames) */
++
++#define MII_ADDR_BUSY		BIT(0)
++#define MII_ADDR_WRITE		BIT(1)
++#define MII_ADDR_REG_SHIFT	6
++#define MII_ADDR_PHY_SHIFT	11
++#define MII_DATA_SHIFT		0
++
++#define FLOW_CONTROL_FCE	BIT(1)
++
++#define DMA_BUS_MODE_SWR	BIT(0)	/* software reset */
++#define DMA_BUS_MODE_BLE	BIT(7)	/* big endian mode */
++#define DMA_BUS_MODE_PBL_SHIFT	8	/* programmable burst length 32 */
++#define DMA_BUS_MODE_DBO	BIT(20)	/* big-endian descriptors */
++
++#define DMA_STATUS_TI		BIT(0)	/* transmit interrupt */
++#define DMA_STATUS_TPS		BIT(1)	/* transmit process stopped */
++#define DMA_STATUS_TU		BIT(2)	/* transmit buffer unavailable */
++#define DMA_STATUS_TJT		BIT(3)	/* transmit buffer timeout */
++#define DMA_STATUS_UNF		BIT(5)	/* transmit underflow */
++#define DMA_STATUS_RI		BIT(6)	/* receive interrupt */
++#define DMA_STATUS_RU		BIT(7)	/* receive buffer unavailable */
++#define DMA_STATUS_RPS		BIT(8)	/* receive process stopped */
++#define DMA_STATUS_ETI		BIT(10)	/* early transmit interrupt */
++#define DMA_STATUS_FBE		BIT(13)	/* fatal bus interrupt */
++#define DMA_STATUS_ERI		BIT(14)	/* early receive interrupt */
++#define DMA_STATUS_AIS		BIT(15)	/* abnormal interrupt summary */
++#define DMA_STATUS_NIS		BIT(16)	/* normal interrupt summary */
++#define DMA_STATUS_RS_SHIFT	17	/* receive process state */
++#define DMA_STATUS_TS_SHIFT	20	/* transmit process state */
++#define DMA_STATUS_EB_SHIFT	23	/* error bits */
++
++#define DMA_CONTROL_SR		BIT(1)	/* start receive */
++#define DMA_CONTROL_ST		BIT(13)	/* start transmit */
++#define DMA_CONTROL_SF		BIT(21)	/* store and forward */
++
++
++typedef struct {
++	volatile unsigned int status;	// OWN, Device control and status.
++	volatile unsigned int devcs;	// pkt Control bits + Length
++	volatile unsigned int addr;	// Current Address.
++	volatile unsigned int descr;	// Next descriptor in chain.
++} ar231x_descr_t;
++
++
++
++//
++// New Combo structure for Both Eth0 AND eth1
++//
++typedef struct {
++	volatile unsigned int mac_control;	/* 0x00 */
++	volatile unsigned int mac_addr[2];	/* 0x04 - 0x08 */
++	volatile unsigned int mcast_table[2];	/* 0x0c - 0x10 */
++	volatile unsigned int mii_addr;	/* 0x14 */
++	volatile unsigned int mii_data;	/* 0x18 */
++	volatile unsigned int flow_control;	/* 0x1c */
++	volatile unsigned int vlan_tag;	/* 0x20 */
++	volatile unsigned int pad[7];	/* 0x24 - 0x3c */
++	volatile unsigned int ucast_table[8];	/* 0x40-0x5c */
++
++} ETHERNET_STRUCT;
++
++/********************************************************************
++ * Interrupt controller
++ ********************************************************************/
++
++typedef struct {
++	volatile unsigned int wdog_control;	/* 0x08 */
++	volatile unsigned int wdog_timer;	/* 0x0c */
++	volatile unsigned int misc_status;	/* 0x10 */
++	volatile unsigned int misc_mask;	/* 0x14 */
++	volatile unsigned int global_status;	/* 0x18 */
++	volatile unsigned int reserved;	/* 0x1c */
++	volatile unsigned int reset_control;	/* 0x20 */
++} INTERRUPT;
++
++/********************************************************************
++ * DMA controller
++ ********************************************************************/
++typedef struct {
++	volatile unsigned int bus_mode;	/* 0x00 (CSR0) */
++	volatile unsigned int xmt_poll;	/* 0x04 (CSR1) */
++	volatile unsigned int rcv_poll;	/* 0x08 (CSR2) */
++	volatile unsigned int rcv_base;	/* 0x0c (CSR3) */
++	volatile unsigned int xmt_base;	/* 0x10 (CSR4) */
++	volatile unsigned int status;	/* 0x14 (CSR5) */
++	volatile unsigned int control;	/* 0x18 (CSR6) */
++	volatile unsigned int intr_ena;	/* 0x1c (CSR7) */
++	volatile unsigned int rcv_missed;	/* 0x20 (CSR8) */
++	volatile unsigned int reserved[11];	/* 0x24-0x4c (CSR9-19) */
++	volatile unsigned int cur_tx_buf_addr;	/* 0x50 (CSR20) */
++	volatile unsigned int cur_rx_buf_addr;	/* 0x50 (CSR21) */
++} DMA;
++
++/*
++ * Struct private for the Sibyte.
++ *
++ * Elements are grouped so variables used by the tx handling goes
++ * together, and will go into the same cache lines etc. in order to
++ * avoid cache line contention between the rx and tx handling on SMP.
++ *
++ * Frequently accessed variables are put at the beginning of the
++ * struct to help the compiler generate better/shorter code.
++ */
++struct ar231x_private {
++	struct net_device *dev;
++	int version;
++	u32 mb[2];
++
++	volatile ETHERNET_STRUCT *phy_regs;
++	volatile ETHERNET_STRUCT *eth_regs;
++	volatile DMA *dma_regs;
++	volatile u32 *int_regs;
++	struct ar231x_eth *cfg;
++
++	spinlock_t lock;			/* Serialise access to device */
++
++	/*
++	 * RX and TX descriptors, must be adjacent
++	 */
++	ar231x_descr_t *rx_ring;
++	ar231x_descr_t *tx_ring;
++
++
++	struct sk_buff **rx_skb;
++	struct sk_buff **tx_skb;
++
++	/*
++	 * RX elements
++	 */
++	u32 rx_skbprd;
++	u32 cur_rx;
++
++	/*
++	 * TX elements
++	 */
++	u32 tx_prd;
++	u32 tx_csm;
++
++	/*
++	 * Misc elements
++	 */
++	char name[48];
++	struct {
++		u32 address;
++		u32 length;
++		char *mapping;
++	} desc;
++
++
++	struct timer_list link_timer;
++	unsigned short phy;			/* merlot phy = 1, samsung phy = 0x1f */
++	unsigned short mac;
++	unsigned short link;		/* 0 - link down, 1 - link up */
++	u16 phyData;
++
++	struct tasklet_struct rx_tasklet;
++	int unloading;
++
++	struct phy_device *phy_dev;
++	struct mii_bus *mii_bus;
++	int oldduplex;
++};
++
++
++/*
++ * Prototypes
++ */
++static int ar231x_init(struct net_device *dev);
++#ifdef TX_TIMEOUT
++static void ar231x_tx_timeout(struct net_device *dev);
++#endif
++static int ar231x_restart(struct net_device *dev);
++static void ar231x_load_rx_ring(struct net_device *dev, int bufs);
++static irqreturn_t ar231x_interrupt(int irq, void *dev_id);
++static int ar231x_open(struct net_device *dev);
++static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev);
++static int ar231x_close(struct net_device *dev);
++static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr,
++						int cmd);
++static void ar231x_init_cleanup(struct net_device *dev);
++static int ar231x_setup_timer(struct net_device *dev);
++static void ar231x_link_timer_fn(unsigned long data);
++static void ar231x_check_link(struct net_device *dev);
++#endif							/* _AR2313_H_ */
diff --git a/target/linux/atheros/patches-2.6.28/110-spiflash.patch b/target/linux/atheros/patches-2.6.28/110-spiflash.patch
deleted file mode 100644
index 4b9b9d6891..0000000000
--- a/target/linux/atheros/patches-2.6.28/110-spiflash.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/mtd/devices/Kconfig
-+++ b/drivers/mtd/devices/Kconfig
-@@ -104,6 +104,10 @@ config M25PXX_USE_FAST_READ
- 	help
- 	  This option enables FAST_READ access supported by ST M25Pxx.
- 
-+config MTD_SPIFLASH
-+	tristate "Atheros AR2315/6/7 SPI Flash support"
-+	depends on ATHEROS_AR5315
-+
- config MTD_SLRAM
- 	tristate "Uncached system RAM"
- 	help
---- a/drivers/mtd/devices/Makefile
-+++ b/drivers/mtd/devices/Makefile
-@@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART)		+= lart.o
- obj-$(CONFIG_MTD_BLOCK2MTD)	+= block2mtd.o
- obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataflash.o
- obj-$(CONFIG_MTD_M25P80)	+= m25p80.o
-+obj-$(CONFIG_MTD_SPIFLASH)	+= spiflash.o
diff --git a/target/linux/atheros/patches-2.6.28/120-spiflash.patch b/target/linux/atheros/patches-2.6.28/120-spiflash.patch
new file mode 100644
index 0000000000..e661365066
--- /dev/null
+++ b/target/linux/atheros/patches-2.6.28/120-spiflash.patch
@@ -0,0 +1,661 @@
+--- a/drivers/mtd/devices/Kconfig
++++ b/drivers/mtd/devices/Kconfig
+@@ -104,6 +104,10 @@ config M25PXX_USE_FAST_READ
+ 	help
+ 	  This option enables FAST_READ access supported by ST M25Pxx.
+ 
++config MTD_AR2315
++	tristate "Atheros AR2315+ SPI Flash support"
++	depends on ATHEROS_AR2315
++
+ config MTD_SLRAM
+ 	tristate "Uncached system RAM"
+ 	help
+--- a/drivers/mtd/devices/Makefile
++++ b/drivers/mtd/devices/Makefile
+@@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART)		+= lart.o
+ obj-$(CONFIG_MTD_BLOCK2MTD)	+= block2mtd.o
+ obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataflash.o
+ obj-$(CONFIG_MTD_M25P80)	+= m25p80.o
++obj-$(CONFIG_MTD_AR2315)	+= ar2315.o
+--- /dev/null
++++ b/drivers/mtd/devices/ar2315.c
+@@ -0,0 +1,519 @@
++
++/*
++ * MTD driver for the SPI Flash Memory support on Atheros AR2315
++ *
++ * Copyright (c) 2005-2006 Atheros Communications Inc.
++ * Copyright (C) 2006-2007 FON Technology, SL.
++ * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++ *
++ * This code is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/version.h>
++#include <linux/errno.h>
++#include <linux/slab.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++#include <linux/sched.h>
++#include <linux/squashfs_fs.h>
++#include <linux/root_dev.h>
++#include <linux/delay.h>
++#include <asm/delay.h>
++#include <asm/io.h>
++
++#include <ar2315_spiflash.h>
++#include <ar231x_platform.h>
++#include <ar231x.h>
++
++
++#define SPIFLASH "spiflash: "
++#define busy_wait(_priv, _condition, _wait) do { \
++	while (_condition) { \
++		spin_unlock_bh(&_priv->lock); \
++		if (_wait > 1) \
++			msleep(_wait); \
++		else if ((_wait == 1) && need_resched()) \
++			schedule(); \
++		else \
++			udelay(1); \
++		spin_lock_bh(&_priv->lock); \
++	} \
++} while (0)
++
++enum {
++	FLASH_NONE,
++	FLASH_1MB,
++	FLASH_2MB,
++	FLASH_4MB,
++	FLASH_8MB,
++	FLASH_16MB,
++};
++
++/* Flash configuration table */
++struct flashconfig {
++	u32 byte_cnt;
++	u32 sector_cnt;
++	u32 sector_size;
++};
++
++const struct flashconfig flashconfig_tbl[] = {
++	[FLASH_NONE] = { 0, 0, 0},
++	[FLASH_1MB]  = { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE},
++	[FLASH_2MB]  = { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE},
++	[FLASH_4MB]  = { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE},
++	[FLASH_8MB]  = { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE},
++	[FLASH_16MB] = { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE}
++};
++
++/* Mapping of generic opcodes to STM serial flash opcodes */
++enum {
++	SPI_WRITE_ENABLE,
++	SPI_WRITE_DISABLE,
++	SPI_RD_STATUS,
++	SPI_WR_STATUS,
++	SPI_RD_DATA,
++	SPI_FAST_RD_DATA,
++	SPI_PAGE_PROGRAM,
++	SPI_SECTOR_ERASE,
++	SPI_BULK_ERASE,
++	SPI_DEEP_PWRDOWN,
++	SPI_RD_SIG,
++};
++
++struct opcodes {
++    __u16 code;
++    __s8 tx_cnt;
++    __s8 rx_cnt;
++};
++const struct opcodes stm_opcodes[] = {
++	[SPI_WRITE_ENABLE] = {STM_OP_WR_ENABLE, 1, 0},
++	[SPI_WRITE_DISABLE] = {STM_OP_WR_DISABLE, 1, 0},
++	[SPI_RD_STATUS] = {STM_OP_RD_STATUS, 1, 1},
++	[SPI_WR_STATUS] = {STM_OP_WR_STATUS, 1, 0},
++	[SPI_RD_DATA] = {STM_OP_RD_DATA, 4, 4},
++	[SPI_FAST_RD_DATA] = {STM_OP_FAST_RD_DATA, 5, 0},
++	[SPI_PAGE_PROGRAM] = {STM_OP_PAGE_PGRM, 8, 0},
++	[SPI_SECTOR_ERASE] = {STM_OP_SECTOR_ERASE, 4, 0},
++	[SPI_BULK_ERASE] = {STM_OP_BULK_ERASE, 1, 0},
++	[SPI_DEEP_PWRDOWN] = {STM_OP_DEEP_PWRDOWN, 1, 0},
++	[SPI_RD_SIG] = {STM_OP_RD_SIG, 4, 1},
++};
++
++/* Driver private data structure */
++struct spiflash_priv {
++	struct mtd_info mtd;
++	void *readaddr; /* memory mapped data for read  */
++	void *mmraddr;  /* memory mapped register space */
++	wait_queue_head_t wq;
++	spinlock_t lock;
++	int state;
++};
++
++#define to_spiflash(_mtd) container_of(_mtd, struct spiflash_priv, mtd)
++
++enum {
++	FL_READY,
++	FL_READING,
++	FL_ERASING,
++	FL_WRITING
++};
++
++/***************************************************************************************************/
++
++static u32
++spiflash_read_reg(struct spiflash_priv *priv, int reg)
++{
++	return ar231x_read_reg((u32) priv->mmraddr + reg);
++}
++
++static void
++spiflash_write_reg(struct spiflash_priv *priv, int reg, u32 data)
++{
++	ar231x_write_reg((u32) priv->mmraddr + reg, data);
++}
++
++static u32
++spiflash_wait_busy(struct spiflash_priv *priv)
++{
++	u32 reg;
++
++	busy_wait(priv, (reg = spiflash_read_reg(priv, SPI_FLASH_CTL)) &
++		SPI_CTL_BUSY, 0);
++	return reg;
++}
++
++static u32
++spiflash_sendcmd (struct spiflash_priv *priv, int opcode, u32 addr)
++{
++	const struct opcodes *op;
++	u32 reg, mask;
++
++	op = &stm_opcodes[opcode];
++	reg = spiflash_wait_busy(priv);
++	spiflash_write_reg(priv, SPI_FLASH_OPCODE,
++		((u32) op->code) | (addr << 8));
++
++	reg &= ~SPI_CTL_TX_RX_CNT_MASK;
++	reg |= SPI_CTL_START | op->tx_cnt | (op->rx_cnt << 4);
++
++	spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
++	spiflash_wait_busy(priv);
++
++	if (!op->rx_cnt)
++		return 0;
++
++	reg = spiflash_read_reg(priv, SPI_FLASH_DATA);
++
++	switch (op->rx_cnt) {
++	case 1:
++		mask = 0x000000ff;
++		break;
++	case 2:
++		mask = 0x0000ffff;
++		break;
++	case 3:
++		mask = 0x00ffffff;
++		break;
++	default:
++		mask = 0xffffffff;
++		break;
++	}
++	reg &= mask;
++
++	return reg;
++}
++
++
++/*
++ * Probe SPI flash device
++ * Function returns 0 for failure.
++ * and flashconfig_tbl array index for success.
++ */
++static int
++spiflash_probe_chip (struct spiflash_priv *priv)
++{
++	u32 sig;
++	int flash_size;
++
++	/* Read the signature on the flash device */
++	spin_lock_bh(&priv->lock);
++	sig = spiflash_sendcmd(priv, SPI_RD_SIG, 0);
++	spin_unlock_bh(&priv->lock);
++
++	switch (sig) {
++	case STM_8MBIT_SIGNATURE:
++		flash_size = FLASH_1MB;
++		break;
++	case STM_16MBIT_SIGNATURE:
++		flash_size = FLASH_2MB;
++		break;
++	case STM_32MBIT_SIGNATURE:
++		flash_size = FLASH_4MB;
++		break;
++	case STM_64MBIT_SIGNATURE:
++		flash_size = FLASH_8MB;
++		break;
++	case STM_128MBIT_SIGNATURE:
++		flash_size = FLASH_16MB;
++		break;
++	default:
++		printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n");
++		return 0;
++	}
++
++	return flash_size;
++}
++
++
++/* wait until the flash chip is ready and grab a lock */
++static int spiflash_wait_ready(struct spiflash_priv *priv, int state)
++{
++	DECLARE_WAITQUEUE(wait, current);
++
++retry:
++	spin_lock_bh(&priv->lock);
++	if (priv->state != FL_READY) {
++		set_current_state(TASK_UNINTERRUPTIBLE);
++		add_wait_queue(&priv->wq, &wait);
++		spin_unlock_bh(&priv->lock);
++		schedule();
++		remove_wait_queue(&priv->wq, &wait);
++
++		if(signal_pending(current))
++			return 0;
++
++		goto retry;
++	}
++	priv->state = state;
++
++	return 1;
++}
++
++static inline void spiflash_done(struct spiflash_priv *priv)
++{
++	priv->state = FL_READY;
++	spin_unlock_bh(&priv->lock);
++	wake_up(&priv->wq);
++}
++
++static void
++spiflash_wait_complete(struct spiflash_priv *priv)
++{
++	busy_wait(priv, spiflash_sendcmd(priv, SPI_RD_STATUS, 0) &
++		SPI_STATUS_WIP, 20);
++	spiflash_done(priv);
++}
++
++
++
++static int
++spiflash_erase (struct mtd_info *mtd, struct erase_info *instr)
++{
++	struct spiflash_priv *priv = to_spiflash(mtd);
++	const struct opcodes *op;
++	u32 temp, reg;
++
++	if (instr->addr + instr->len > mtd->size)
++		return -EINVAL;
++
++	if (!spiflash_wait_ready(priv, FL_ERASING))
++		return -EINTR;
++
++	spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
++	reg = spiflash_wait_busy(priv);
++
++	op = &stm_opcodes[SPI_SECTOR_ERASE];
++	temp = ((u32)instr->addr << 8) | (u32)(op->code);
++	spiflash_write_reg(priv, SPI_FLASH_OPCODE, temp);
++
++	reg &= ~SPI_CTL_TX_RX_CNT_MASK;
++	reg |= op->tx_cnt | SPI_CTL_START;
++	spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
++
++	spiflash_wait_complete(priv);
++
++	instr->state = MTD_ERASE_DONE;
++	if (instr->callback)
++		instr->callback(instr);
++
++	return 0;
++}
++
++static int
++spiflash_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
++{
++	struct spiflash_priv *priv = to_spiflash(mtd);
++	u8 *read_addr;
++
++	if (!len)
++		return 0;
++
++	if (from + len > mtd->size)
++		return -EINVAL;
++
++	*retlen = len;
++
++	if (!spiflash_wait_ready(priv, FL_READING))
++		return -EINTR;
++
++	read_addr = (u8 *)(priv->readaddr + from);
++	memcpy_fromio(buf, read_addr, len);
++	spiflash_done(priv);
++
++	return 0;
++}
++
++static int
++spiflash_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u8 *buf)
++{
++	struct spiflash_priv *priv = to_spiflash(mtd);
++	u32 opcode, bytes_left;
++
++	*retlen = 0;
++
++	if (!len)
++		return 0;
++
++	if (to + len > mtd->size)
++		return -EINVAL;
++
++	bytes_left = len;
++
++	do {
++		u32 read_len, reg, page_offset, spi_data = 0;
++
++		read_len = min(bytes_left, sizeof(u32));
++
++		/* 32-bit writes cannot span across a page boundary
++		 * (256 bytes). This types of writes require two page
++		 * program operations to handle it correctly. The STM part
++		 * will write the overflow data to the beginning of the
++		 * current page as opposed to the subsequent page.
++		 */
++		page_offset = (to & (STM_PAGE_SIZE - 1)) + read_len;
++
++		if (page_offset > STM_PAGE_SIZE)
++			read_len -= (page_offset - STM_PAGE_SIZE);
++
++		if (!spiflash_wait_ready(priv, FL_WRITING))
++			return -EINTR;
++
++		spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
++		spi_data = 0;
++		switch (read_len) {
++		case 4:
++			spi_data |= buf[3] << 24;
++			/* fall through */
++		case 3:
++			spi_data |= buf[2] << 16;
++			/* fall through */
++		case 2:
++			spi_data |= buf[1] << 8;
++			/* fall through */
++		case 1:
++			spi_data |= buf[0] & 0xff;
++			break;
++		default:
++			break;
++		}
++
++		spiflash_write_reg(priv, SPI_FLASH_DATA, spi_data);
++		opcode = stm_opcodes[SPI_PAGE_PROGRAM].code |
++			(to & 0x00ffffff) << 8;
++		spiflash_write_reg(priv, SPI_FLASH_OPCODE, opcode);
++
++		reg = spiflash_read_reg(priv, SPI_FLASH_CTL);
++		reg &= ~SPI_CTL_TX_RX_CNT_MASK;
++		reg |= (read_len + 4) | SPI_CTL_START;
++		spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
++
++		spiflash_wait_complete(priv);
++
++		bytes_left -= read_len;
++		to += read_len;
++		buf += read_len;
++
++		*retlen += read_len;
++	} while (bytes_left != 0);
++
++	return 0;
++}
++
++
++#ifdef CONFIG_MTD_PARTITIONS
++static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "MyLoader", NULL };
++#endif
++
++
++static int
++spiflash_probe(struct platform_device *pdev)
++{
++	struct spiflash_priv *priv;
++	struct mtd_partition *parts;
++	struct mtd_info *mtd;
++	int index, num_parts;
++	int result = 0;
++
++	priv = kzalloc(sizeof(struct spiflash_priv), GFP_KERNEL);
++	spin_lock_init(&priv->lock);
++	init_waitqueue_head(&priv->wq);
++	priv->state = FL_READY;
++	mtd = &priv->mtd;
++
++	priv->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
++	if (!priv->mmraddr) {
++		printk(KERN_WARNING SPIFLASH "Failed to map flash device\n");
++		goto error;
++	}
++
++	index = spiflash_probe_chip(priv);
++	if (!index) {
++		printk (KERN_WARNING SPIFLASH "Found no serial flash device\n");
++		goto error;
++	}
++
++	priv->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
++	if (!priv->readaddr) {
++		printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
++		goto error;
++	}
++
++	platform_set_drvdata(pdev, priv);
++	mtd->name = "spiflash";
++	mtd->type = MTD_NORFLASH;
++	mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
++	mtd->size = flashconfig_tbl[index].byte_cnt;
++	mtd->erasesize = flashconfig_tbl[index].sector_size;
++	mtd->writesize = 1;
++	mtd->numeraseregions = 0;
++	mtd->eraseregions = NULL;
++	mtd->erase = spiflash_erase;
++	mtd->read = spiflash_read;
++	mtd->write = spiflash_write;
++	mtd->owner = THIS_MODULE;
++
++#ifdef CONFIG_MTD_PARTITIONS
++	/* parse redboot partitions */
++	num_parts = parse_mtd_partitions(mtd, part_probe_types, &parts, 0);
++	if (!num_parts)
++		goto error;
++
++	result = add_mtd_partitions(mtd, parts, num_parts);
++#endif
++
++	return result;
++
++error:
++	if (priv->mmraddr)
++		iounmap(priv->mmraddr);
++	kfree(priv);
++	return -ENXIO;
++}
++
++static int
++spiflash_remove (struct platform_device *pdev)
++{
++	struct spiflash_priv *priv = platform_get_drvdata(pdev);
++	struct mtd_info *mtd = &priv->mtd;
++
++	del_mtd_partitions(mtd);
++	iounmap(priv->mmraddr);
++	iounmap(priv->readaddr);
++	kfree(priv);
++
++	return 0;
++}
++
++struct platform_driver spiflash_driver = {
++	.driver.name = "spiflash",
++	.probe = spiflash_probe,
++	.remove = spiflash_remove,
++};
++
++int __init
++spiflash_init (void)
++{
++	return platform_driver_register(&spiflash_driver);
++}
++
++void __exit
++spiflash_exit (void)
++{
++	return platform_driver_unregister(&spiflash_driver);
++}
++
++module_init (spiflash_init);
++module_exit (spiflash_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc");
++MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC");
++
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ar231x/ar2315_spiflash.h
+@@ -0,0 +1,116 @@
++/*
++ * SPI Flash Memory support header file.
++ *
++ * Copyright (c) 2005, Atheros Communications Inc.
++ * Copyright (C) 2006 FON Technology, SL.
++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
++ *
++ * This code is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++#ifndef __AR2315_SPIFLASH_H
++#define __AR2315_SPIFLASH_H
++
++#define STM_PAGE_SIZE           256
++
++#define SFI_WRITE_BUFFER_SIZE   4
++#define SFI_FLASH_ADDR_MASK     0x00ffffff
++
++#define STM_8MBIT_SIGNATURE     0x13
++#define STM_M25P80_BYTE_COUNT   1048576
++#define STM_M25P80_SECTOR_COUNT 16
++#define STM_M25P80_SECTOR_SIZE  0x10000
++
++#define STM_16MBIT_SIGNATURE    0x14
++#define STM_M25P16_BYTE_COUNT   2097152
++#define STM_M25P16_SECTOR_COUNT 32
++#define STM_M25P16_SECTOR_SIZE  0x10000
++
++#define STM_32MBIT_SIGNATURE    0x15
++#define STM_M25P32_BYTE_COUNT   4194304
++#define STM_M25P32_SECTOR_COUNT 64
++#define STM_M25P32_SECTOR_SIZE  0x10000
++
++#define STM_64MBIT_SIGNATURE    0x16
++#define STM_M25P64_BYTE_COUNT   8388608
++#define STM_M25P64_SECTOR_COUNT 128
++#define STM_M25P64_SECTOR_SIZE  0x10000
++
++#define STM_128MBIT_SIGNATURE   0x17
++#define STM_M25P128_BYTE_COUNT   16777216
++#define STM_M25P128_SECTOR_COUNT 256
++#define STM_M25P128_SECTOR_SIZE  0x10000
++
++#define STM_1MB_BYTE_COUNT   STM_M25P80_BYTE_COUNT
++#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
++#define STM_1MB_SECTOR_SIZE  STM_M25P80_SECTOR_SIZE
++#define STM_2MB_BYTE_COUNT   STM_M25P16_BYTE_COUNT
++#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
++#define STM_2MB_SECTOR_SIZE  STM_M25P16_SECTOR_SIZE
++#define STM_4MB_BYTE_COUNT   STM_M25P32_BYTE_COUNT
++#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
++#define STM_4MB_SECTOR_SIZE  STM_M25P32_SECTOR_SIZE
++#define STM_8MB_BYTE_COUNT   STM_M25P64_BYTE_COUNT
++#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
++#define STM_8MB_SECTOR_SIZE  STM_M25P64_SECTOR_SIZE
++#define STM_16MB_BYTE_COUNT   STM_M25P128_BYTE_COUNT
++#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
++#define STM_16MB_SECTOR_SIZE  STM_M25P128_SECTOR_SIZE
++
++/*
++ * ST Microelectronics Opcodes for Serial Flash
++ */
++
++#define STM_OP_WR_ENABLE       0x06     /* Write Enable */
++#define STM_OP_WR_DISABLE      0x04     /* Write Disable */
++#define STM_OP_RD_STATUS       0x05     /* Read Status */
++#define STM_OP_WR_STATUS       0x01     /* Write Status */
++#define STM_OP_RD_DATA         0x03     /* Read Data */
++#define STM_OP_FAST_RD_DATA    0x0b     /* Fast Read Data */
++#define STM_OP_PAGE_PGRM       0x02     /* Page Program */
++#define STM_OP_SECTOR_ERASE    0xd8     /* Sector Erase */
++#define STM_OP_BULK_ERASE      0xc7     /* Bulk Erase */
++#define STM_OP_DEEP_PWRDOWN    0xb9     /* Deep Power-Down Mode */
++#define STM_OP_RD_SIG          0xab     /* Read Electronic Signature */
++
++#define STM_STATUS_WIP       0x01       /* Write-In-Progress */
++#define STM_STATUS_WEL       0x02       /* Write Enable Latch */
++#define STM_STATUS_BP0       0x04       /* Block Protect 0 */
++#define STM_STATUS_BP1       0x08       /* Block Protect 1 */
++#define STM_STATUS_BP2       0x10       /* Block Protect 2 */
++#define STM_STATUS_SRWD      0x80       /* Status Register Write Disable */
++
++/*
++ * SPI Flash Interface Registers
++ */
++#define AR531XPLUS_SPI_READ     0x08000000
++#define AR531XPLUS_SPI_MMR      0x11300000
++#define AR531XPLUS_SPI_MMR_SIZE 12
++
++#define AR531XPLUS_SPI_CTL      0x00
++#define AR531XPLUS_SPI_OPCODE   0x04
++#define AR531XPLUS_SPI_DATA     0x08
++
++#define SPI_FLASH_READ          AR531XPLUS_SPI_READ
++#define SPI_FLASH_MMR           AR531XPLUS_SPI_MMR
++#define SPI_FLASH_MMR_SIZE      AR531XPLUS_SPI_MMR_SIZE
++#define SPI_FLASH_CTL           AR531XPLUS_SPI_CTL
++#define SPI_FLASH_OPCODE        AR531XPLUS_SPI_OPCODE
++#define SPI_FLASH_DATA          AR531XPLUS_SPI_DATA
++
++#define SPI_CTL_START           0x00000100
++#define SPI_CTL_BUSY            0x00010000
++#define SPI_CTL_TXCNT_MASK      0x0000000f
++#define SPI_CTL_RXCNT_MASK      0x000000f0
++#define SPI_CTL_TX_RX_CNT_MASK  0x000000ff
++#define SPI_CTL_SIZE_MASK       0x00060000
++
++#define SPI_CTL_CLK_SEL_MASK    0x03000000
++#define SPI_OPCODE_MASK         0x000000ff
++
++#define SPI_STATUS_WIP		STM_STATUS_WIP
++
++#endif
diff --git a/target/linux/atheros/patches-2.6.28/120-watchdog.patch b/target/linux/atheros/patches-2.6.28/120-watchdog.patch
deleted file mode 100644
index 88c42a2a83..0000000000
--- a/target/linux/atheros/patches-2.6.28/120-watchdog.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -747,6 +747,12 @@ config TXX9_WDT
- 	help
- 	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
- 
-+config ATHEROS_WDT
-+	tristate "Atheros wisoc Watchdog Timer"
-+	depends on ATHEROS
-+	help
-+	  Hardware driver for the Atheros wisoc Watchdog Timer.
-+
- # PARISC Architecture
- 
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_ATHEROS_WDT) += ar2315-wtd.o
- 
- # PARISC Architecture
- 
diff --git a/target/linux/atheros/patches-2.6.28/130-ar2313_ethernet.patch b/target/linux/atheros/patches-2.6.28/130-ar2313_ethernet.patch
deleted file mode 100644
index 5c183a431f..0000000000
--- a/target/linux/atheros/patches-2.6.28/130-ar2313_ethernet.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -359,6 +359,12 @@ config AX88796_93CX6
- 	help
- 	  Select this if your platform comes with an external 93CX6 eeprom.
- 
-+config AR2313
-+	tristate "AR2313 Ethernet support"
-+	depends on NET_ETHERNET && ATHEROS
-+	help
-+	  Support for the AR231x/531x ethernet controller
-+
- config MACE
- 	tristate "MACE (Power Mac ethernet) support"
- 	depends on PPC_PMAC && PPC32
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -199,6 +199,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o
- obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
- obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
-+obj-$(CONFIG_AR2313) += ar2313/
- obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
- obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
- obj-$(CONFIG_DECLANCE) += declance.o
diff --git a/target/linux/atheros/patches-2.6.28/130-watchdog.patch b/target/linux/atheros/patches-2.6.28/130-watchdog.patch
new file mode 100644
index 0000000000..31db513970
--- /dev/null
+++ b/target/linux/atheros/patches-2.6.28/130-watchdog.patch
@@ -0,0 +1,228 @@
+--- /dev/null
++++ b/drivers/watchdog/ar2315-wtd.c
+@@ -0,0 +1,200 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ *
++ * Copyright (C) 2008 John Crispin <blogic@openwrt.org>
++ * Based on EP93xx and ifxmips wdt driver
++ */
++
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/types.h>
++#include <linux/miscdevice.h>
++#include <linux/watchdog.h>
++#include <linux/fs.h>
++#include <linux/ioport.h>
++#include <linux/notifier.h>
++#include <linux/reboot.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++
++#include <asm/io.h>
++#include <asm/uaccess.h>
++#include <asm/system.h>
++#include <asm/addrspace.h>
++#include <ar231x_platform.h>
++#include <ar2315_regs.h>
++#include <ar231x.h>
++
++#define CLOCK_RATE 40000000
++#define HEARTBEAT(x) (x < 1 || x > 90)?(20):(x)
++
++static int wdt_timeout = 20;
++static int started = 0;
++static int in_use = 0;
++
++static void
++ar2315_wdt_enable(void)
++{
++	ar231x_write_reg(AR2315_WD, wdt_timeout * CLOCK_RATE);
++	ar231x_write_reg(AR2315_ISR, 0x80);
++}
++
++static ssize_t
++ar2315_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
++{
++	if(len)
++		ar2315_wdt_enable();
++	return len;
++}
++
++static int
++ar2315_wdt_open(struct inode *inode, struct file *file)
++{
++	if(in_use)
++		return -EBUSY;
++	ar2315_wdt_enable();
++	in_use = started = 1;
++	return nonseekable_open(inode, file);
++}
++
++static int
++ar2315_wdt_release(struct inode *inode, struct file *file)
++{
++	in_use = 0;
++	return 0;
++}
++
++static irqreturn_t
++ar2315_wdt_interrupt(int irq, void *dev_id)
++{
++	if(started)
++	{
++		printk(KERN_CRIT "watchdog expired, rebooting system\n");
++		emergency_restart();
++	} else {
++		ar231x_write_reg(AR2315_WDC, 0);
++		ar231x_write_reg(AR2315_WD, 0);
++		ar231x_write_reg(AR2315_ISR, 0x80);
++	}
++	return IRQ_HANDLED;
++}
++
++static struct watchdog_info ident = {
++	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
++	.identity = "ar2315 Watchdog",
++};
++
++static int
++ar2315_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
++{
++	int new_wdt_timeout;
++	int ret = -ENOIOCTLCMD;
++
++	switch(cmd)
++	{
++		case WDIOC_GETSUPPORT:
++			ret = copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)) ? -EFAULT : 0;
++			break;
++
++		case WDIOC_KEEPALIVE:
++			ar2315_wdt_enable();
++			ret = 0;
++			break;
++
++		case WDIOC_SETTIMEOUT:
++			if((ret = get_user(new_wdt_timeout, (int __user *)arg)))
++				break;
++			wdt_timeout = HEARTBEAT(new_wdt_timeout);
++			ar2315_wdt_enable();
++			break;
++
++		case WDIOC_GETTIMEOUT:
++			ret = put_user(wdt_timeout, (int __user *)arg);
++			break;
++	}
++	return ret;
++}
++
++static struct file_operations ar2315_wdt_fops = {
++	.owner		= THIS_MODULE,
++	.llseek		= no_llseek,
++	.write		= ar2315_wdt_write,
++	.ioctl		= ar2315_wdt_ioctl,
++	.open		= ar2315_wdt_open,
++	.release	= ar2315_wdt_release,
++};
++
++static struct miscdevice ar2315_wdt_miscdev = {
++	.minor	= WATCHDOG_MINOR,
++	.name	= "watchdog",
++	.fops	= &ar2315_wdt_fops,
++};
++
++static int
++ar2315_wdt_probe(struct platform_device *dev)
++{
++	int ret = 0;
++
++	ar2315_wdt_enable();
++	ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, IRQF_DISABLED, "ar2315_wdt", NULL);
++	if(ret)
++	{
++		printk(KERN_ERR "ar2315wdt: failed to register inetrrupt\n");
++		goto out;
++	}
++
++	ret = misc_register(&ar2315_wdt_miscdev);
++	if(ret)
++		printk(KERN_ERR "ar2315wdt: failed to register miscdev\n");
++
++out:
++	return ret;
++}
++
++static int
++ar2315_wdt_remove(struct platform_device *dev)
++{
++	misc_deregister(&ar2315_wdt_miscdev);
++	free_irq(AR531X_MISC_IRQ_WATCHDOG, NULL);
++	return 0;
++}
++
++static struct platform_driver ar2315_wdt_driver = {
++	.probe = ar2315_wdt_probe,
++	.remove = ar2315_wdt_remove,
++	.driver = {
++		.name = "ar2315_wdt",
++		.owner = THIS_MODULE,
++	},
++};
++
++static int __init
++init_ar2315_wdt(void)
++{
++	int ret = platform_driver_register(&ar2315_wdt_driver);
++	if(ret)
++		printk(KERN_INFO "ar2315_wdt: error registering platfom driver!");
++	return ret;
++}
++
++static void __exit
++exit_ar2315_wdt(void)
++{
++	platform_driver_unregister(&ar2315_wdt_driver);
++}
++
++module_init(init_ar2315_wdt);
++module_exit(exit_ar2315_wdt);
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -747,6 +747,12 @@ config TXX9_WDT
+ 	help
+ 	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+ 
++config ATHEROS_WDT
++	tristate "Atheros wisoc Watchdog Timer"
++	depends on ATHEROS
++	help
++	  Hardware driver for the Atheros wisoc Watchdog Timer.
++
+ # PARISC Architecture
+ 
+ # POWERPC Architecture
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
++obj-$(CONFIG_ATHEROS_WDT) += ar2315-wtd.o
+ 
+ # PARISC Architecture
+ 
diff --git a/target/linux/atheros/patches-2.6.28/135-ar2313_2.6.26.patch b/target/linux/atheros/patches-2.6.28/135-ar2313_2.6.26.patch
deleted file mode 100644
index a39b46c0b8..0000000000
--- a/target/linux/atheros/patches-2.6.28/135-ar2313_2.6.26.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/net/ar2313/ar2313.c
-+++ b/drivers/net/ar2313/ar2313.c
-@@ -291,7 +291,7 @@ int __init ar2313_probe(struct platform_
- 	sp->mii_bus.write = mdiobus_write;
- 	sp->mii_bus.reset = mdiobus_reset;
- 	sp->mii_bus.name = "ar2313_eth_mii";
--	sp->mii_bus.id = 0;
-+	snprintf(sp->mii_bus.id, MII_BUS_ID_SIZE, "0");
- 	sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL);
- 	*sp->mii_bus.irq = PHY_POLL;
- 
diff --git a/target/linux/atheros/patches-2.6.28/137-ar2313_2.6.28.patch b/target/linux/atheros/patches-2.6.28/137-ar2313_2.6.28.patch
deleted file mode 100644
index 0f4d732630..0000000000
--- a/target/linux/atheros/patches-2.6.28/137-ar2313_2.6.28.patch
+++ /dev/null
@@ -1,144 +0,0 @@
-This patch reflects changes in mdiobus implementation in kernel 2.6.28.
---- a/drivers/net/ar2313/ar2313.c
-+++ b/drivers/net/ar2313/ar2313.c
-@@ -159,10 +159,10 @@ static void rx_tasklet_func(unsigned lon
- static void rx_tasklet_cleanup(struct net_device *dev);
- static void ar2313_multicast_list(struct net_device *dev);
- 
--static int mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
--static int mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
--static int mdiobus_reset(struct mii_bus *bus);
--static int mdiobus_probe (struct net_device *dev);
-+static int ar2313_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
-+static int ar2313_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
-+static int ar2313_mdiobus_reset(struct mii_bus *bus);
-+static int ar2313_mdiobus_probe (struct net_device *dev);
- static void ar2313_adjust_link(struct net_device *dev);
- 
- #ifndef ERR
-@@ -286,18 +286,22 @@ int __init ar2313_probe(struct platform_
- 		   dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
- 		   dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
- 
--	sp->mii_bus.priv = dev;
--	sp->mii_bus.read = mdiobus_read;
--	sp->mii_bus.write = mdiobus_write;
--	sp->mii_bus.reset = mdiobus_reset;
--	sp->mii_bus.name = "ar2313_eth_mii";
--	snprintf(sp->mii_bus.id, MII_BUS_ID_SIZE, "0");
--	sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL);
--	*sp->mii_bus.irq = PHY_POLL;
-+	sp->mii_bus = mdiobus_alloc();
-+	if (sp->mii_bus == NULL)
-+		return -1;
-+
-+	sp->mii_bus->priv = dev;
-+	sp->mii_bus->read = ar2313_mdiobus_read;
-+	sp->mii_bus->write = ar2313_mdiobus_write;
-+	sp->mii_bus->reset = ar2313_mdiobus_reset;
-+	sp->mii_bus->name = "ar2313_eth_mii";
-+	snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "0");
-+	sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL);
-+	*sp->mii_bus->irq = PHY_POLL;
- 
--	mdiobus_register(&sp->mii_bus);
-+	mdiobus_register(sp->mii_bus);
- 
--	if (mdiobus_probe(dev) != 0) {
-+	if (ar2313_mdiobus_probe(dev) != 0) {
- 		printk(KERN_ERR "ar2313: mdiobus_probe failed");
- 		rx_tasklet_cleanup(dev);
- 		ar2313_init_cleanup(dev);
-@@ -432,9 +436,12 @@ static void rx_tasklet_cleanup(struct ne
- static int __exit ar2313_remove(struct platform_device *pdev)
- {
- 	struct net_device *dev = platform_get_drvdata(pdev);
-+	struct ar2313_private *sp = netdev_priv(dev);
- 	rx_tasklet_cleanup(dev);
- 	ar2313_init_cleanup(dev);
- 	unregister_netdev(dev);
-+	mdiobus_unregister(sp->mii_bus);
-+	mdiobus_free(sp->mii_bus);
- 	kfree(dev);
- 	return 0;
- }
-@@ -619,7 +626,7 @@ static void ar2313_check_link(struct net
- 	struct ar2313_private *sp = netdev_priv(dev);
- 	u16 phyData;
- 
--	phyData = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMSR);
-+	phyData = ar2313_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR);
- 	if (sp->phyData != phyData) {
- 		if (phyData & BMSR_LSTATUS) {
- 			/* link is present, ready link partner ability to deterine
-@@ -628,10 +635,10 @@ static void ar2313_check_link(struct net
- 			u16 reg;
- 
- 			sp->link = 1;
--			reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMCR);
-+			reg = ar2313_mdiobus_read(sp->mii_bus, sp->phy, MII_BMCR);
- 			if (reg & BMCR_ANENABLE) {
- 				/* auto neg enabled */
--				reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_LPA);
-+				reg = ar2313_mdiobus_read(sp->mii_bus, sp->phy, MII_LPA);
- 				duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
- 			} else {
- 				/* no auto neg, just read duplex config */
-@@ -1320,7 +1327,7 @@ static void ar2313_adjust_link(struct ne
- 	((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
- 
- static int
--mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
-+ar2313_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
- {
- 	struct net_device *const dev = bus->priv;
- 	struct ar2313_private *sp = netdev_priv(dev);
-@@ -1332,7 +1339,7 @@ mdiobus_read(struct mii_bus *bus, int ph
- }
- 
- static int
--mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
-+ar2313_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
-              u16 value)
- {
- 	struct net_device *const dev = bus->priv;
-@@ -1346,7 +1353,7 @@ mdiobus_write(struct mii_bus *bus, int p
- 	return 0;
- }
- 
--static int mdiobus_reset(struct mii_bus *bus)
-+static int ar2313_mdiobus_reset(struct mii_bus *bus)
- {
- 	struct net_device *const dev = bus->priv;
- 
-@@ -1355,7 +1362,7 @@ static int mdiobus_reset(struct mii_bus 
- 	return 0;
- }
- 
--static int mdiobus_probe (struct net_device *dev)
-+static int ar2313_mdiobus_probe (struct net_device *dev)
- {
- 	struct ar2313_private *const sp = netdev_priv(dev);
- 	struct phy_device *phydev = NULL;
-@@ -1363,8 +1370,8 @@ static int mdiobus_probe (struct net_dev
- 
- 	/* find the first (lowest address) PHY on the current MAC's MII bus */
- 	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
--		if (sp->mii_bus.phy_map[phy_addr]) {
--			phydev = sp->mii_bus.phy_map[phy_addr];
-+		if (sp->mii_bus->phy_map[phy_addr]) {
-+			phydev = sp->mii_bus->phy_map[phy_addr];
- 			break; /* break out with first one found */
- 		}
- 
---- a/drivers/net/ar2313/ar2313.h
-+++ b/drivers/net/ar2313/ar2313.h
-@@ -162,7 +162,7 @@ struct ar2313_private {
- 	int unloading;
- 
- 	struct phy_device *phy_dev;
--	struct mii_bus mii_bus;
-+	struct mii_bus *mii_bus;
- 	int oldduplex;
- };
- 
diff --git a/target/linux/atheros/patches-2.6.28/200-ar2313_enable_mvswitch.patch b/target/linux/atheros/patches-2.6.28/200-ar2313_enable_mvswitch.patch
index 710314d7f7..88ffad62d0 100644
--- a/target/linux/atheros/patches-2.6.28/200-ar2313_enable_mvswitch.patch
+++ b/target/linux/atheros/patches-2.6.28/200-ar2313_enable_mvswitch.patch
@@ -1,14 +1,14 @@
---- a/drivers/net/ar2313/ar2313.c
-+++ b/drivers/net/ar2313/ar2313.c
-@@ -841,6 +841,7 @@ static void ar2313_load_rx_ring(struct n
+--- a/drivers/net/ar231x.c
++++ b/drivers/net/ar231x.c
+@@ -735,6 +735,7 @@ static void ar231x_load_rx_ring(struct n
  	for (i = 0; i < nr_bufs; i++) {
  		struct sk_buff *skb;
- 		ar2313_descr_t *rd;
+ 		ar231x_descr_t *rd;
 +		int offset = RX_OFFSET;
  
- 		if (sp->rx_skb[idx]) {
- #if DEBUG_RX
-@@ -862,7 +863,9 @@ static void ar2313_load_rx_ring(struct n
+ 		if (sp->rx_skb[idx])
+ 			break;
+@@ -753,7 +754,9 @@ static void ar231x_load_rx_ring(struct n
  		 * Make sure IP header starts on a fresh cache line.
  		 */
  		skb->dev = dev;
@@ -18,8 +18,8 @@
 +		skb_reserve(skb, offset);
  		sp->rx_skb[idx] = skb;
  
- 		rd = (ar2313_descr_t *) & sp->rx_ring[idx];
-@@ -953,6 +956,7 @@ static int ar2313_rx_int(struct net_devi
+ 		rd = (ar231x_descr_t *) & sp->rx_ring[idx];
+@@ -828,6 +831,7 @@ static int ar231x_rx_int(struct net_devi
  			/* alloc new buffer. */
  			skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128);
  			if (skb_new != NULL) {
@@ -27,7 +27,7 @@
  
  				skb = sp->rx_skb[idx];
  				/* set skb */
-@@ -960,13 +964,17 @@ static int ar2313_rx_int(struct net_devi
+@@ -835,13 +839,17 @@ static int ar231x_rx_int(struct net_devi
  						((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
  
  				dev->stats.rx_bytes += skb->len;
@@ -48,7 +48,7 @@
  				/* reset descriptor's curr_addr */
  				rxdesc->addr = virt_to_phys(skb_new->data);
  
-@@ -1392,6 +1400,8 @@ static int ar2313_mdiobus_probe (struct 
+@@ -1243,6 +1251,8 @@ static int ar231x_mdiobus_probe (struct 
  		return PTR_ERR(phydev);
  	}
  
@@ -57,11 +57,11 @@
  	/* mask with MAC supported features */
  	phydev->supported &= (SUPPORTED_10baseT_Half
  		| SUPPORTED_10baseT_Full
---- a/drivers/net/ar2313/ar2313.h
-+++ b/drivers/net/ar2313/ar2313.h
-@@ -107,6 +107,8 @@ typedef struct {
+--- a/drivers/net/ar231x.h
++++ b/drivers/net/ar231x.h
+@@ -221,6 +221,8 @@ typedef struct {
   */
- struct ar2313_private {
+ struct ar231x_private {
  	struct net_device *dev;
 +	int (*rx)(struct sk_buff *skb);
 +