package/network/config/ltq-vdsl-app/files/dsl_control

   1 #!/bin/sh /etc/rc.common
   2 # Copyright (C) 2012 OpenWrt.org
   3
   4 START=99
   5
   6 EXTRA_COMMANDS="status lucistat"
   7 EXTRA_HELP="    status  Get DSL status information
   8         lucistat  Get status information if lua friendly format"
   9
  10 SERVICE_DAEMONIZE=1
  11 SERVICE_WRITE_PID=1
  12
  13 . /lib/functions/lantiq_dsl.sh
  14 XDSL_CTRL=vdsl_cpe_control
  15
  16 # G.992.1 Annex A
  17 # G.992.2 Annex A
  18 # G.992.3 Annex A
  19 # G.992.4 Annex A
  20 # G.992.5 Annex A
  21 # G.993.2 Annex A/B/C
  22 xtse_adsl_a="04 01 04 01 00 01 00 00"
  23
  24 # G.992.1 Annex B
  25 # G.992.3 Annex B
  26 # G.992.5 Annex B
  27 # G.993.2 Annex A/B/C
  28 xtse_adsl_b="10 00 10 00 00 04 00 00"
  29
  30 # G.992.1 Annex B
  31 # G.992.3 Annex B
  32 # G.992.3 Annex J
  33 # G.992.5 Annex B
  34 # G.992.5 Annex J
  35 # G.993.2 Annex A/B/C
  36 xtse_adsl_j="10 00 10 40 00 04 01 00"
  37
  38 xtse_vdsl="00 00 00 00 00 00 00 07"
  39
  40 xdsl_scr() {
  41         val=`echo $2 | sed "s/ / 0x/g"`
  42         echo "[WaitForConfiguration]={
  43 #G997XTUSEC_g997xtusecs 0x$val
  44 }
  45
  46 [WaitForLinkActivate]={
  47 }
  48
  49 [WaitForRestart]={
  50 }
  51
  52 [Common]={
  53 }" > /tmp/$1.scr
  54 }
  55
  56 # A43
  57 tone_adsl_a="0x142"
  58 tone_vdsl_a="0x142"
  59
  60 # A43 + V43
  61 tone_adsl_av="0x142"
  62 tone_vdsl_av="0x146"
  63
  64 # B43
  65 tone_adsl_b="0x1"
  66 tone_vdsl_b="0x1"
  67
  68 # B43 + V43
  69 tone_adsl_bv="0x1"
  70 tone_vdsl_bv="0x5"
  71
  72 lowlevel_cfg() {
  73         echo "# VRX Low Level Configuration File
  74 #
  75 # Parameters must be separated by tabs or spaces.
  76 # Empty lines and comments will be ignored.
  77 #
  78
  79 # nFilter
  80 #
  81 # NA     = -1
  82 # OFF    = 0
  83 # ISDN   = 1
  84 # POTS   = 2
  85 # POTS_2 = 3
  86 # POTS_3 = 4
  87 #
  88 #  (dec)
  89     -1
  90
  91 # nHsToneGroupMode nHsToneGroup_A       nHsToneGroup_V    nHsToneGroup_AV
  92 #
  93 # NA     = -1      NA         = -1      see               see
  94 # AUTO   = 0       VDSL2_B43  = 0x0001  nHsToneGroup_A    nHsToneGroup_A
  95 # MANUAL = 1       VDSL2_A43  = 0x0002
  96 #                  VDSL2_V43  = 0x0004
  97 #                  VDSL1_V43P = 0x0008
  98 #                  VDSL1_V43I = 0x0010
  99 #                  ADSL1_C43  = 0x0020
 100 #                  ADSL2_J43  = 0x0040
 101 #                  ADSL2_B43C = 0x0080
 102 #                  ADSL2_A43C = 0x0100
 103 #
 104 #  (dec)           (hex)                (hex)             (hex)
 105      1             $1                   $2               0x0
 106
 107 #   nBaseAddr     nIrqNum
 108 #
 109 #     (hex)        (dec)
 110     0x1e116000      63
 111
 112 # nUtopiaPhyAdr   nUtopiaBusWidth      nPosPhyParity
 113 #                 default(16b) = 0     NA   = -1
 114 #                 8-bit        = 1     ODD  = 0
 115 #                 16-bit       = 2
 116 #
 117 #
 118 #    (hex)            (dec)                (dec)
 119       0xFF              0                    0
 120
 121 # bNtrEnable
 122 #
 123 #  (dec)
 124     0" > /tmp/lowlevel.cfg
 125 }
 126
 127 start() {
 128         local annex
 129         local firmware
 130         local tone
 131         local tone_adsl
 132         local tone_vdsl
 133         local xtse_adsl
 134         local mode
 135
 136         config_load network
 137         config_get tone dsl tone
 138         config_get annex dsl annex
 139         config_get firmware dsl firmware
 140         config_get xfer_mode dsl xfer_mode
 141
 142         [ -z "${xfer_mode}" ] && xfer_mode=ptm
 143
 144         case "${xfer_mode}" in
 145         atm)
 146                 insmod ltq_atm_vr9
 147                 mode=1
 148                 ;;
 149         *)
 150                 insmod ltq_ptm_vr9
 151                 mode=2
 152                 ;;
 153         esac
 154
 155         eval "xtse_adsl=\"\${xtse_adsl_$annex}\""
 156         [ -z "${xtse_adsl}" ] && xtse_adsl=$xtse_adsl_b
 157
 158         eval "tone_adsl=\"\${tone_adsl_$tone}\""
 159         [ -z "${tone_adsl}" ] && tone_adsl=$tone_adsl_av
 160
 161         eval "tone_vdsl=\"\${tone_vdsl_$tone}\""
 162         [ -z "${tone_vdsl}" ] && tone_vdsl=$tone_vdsl_av
 163
 164         [ -z "${firmware}" ] && firmware=vdsl.bin
 165
 166         xdsl_scr adsl "${xtse_adsl}"
 167         xdsl_scr vdsl "${xtse_vdsl}"
 168         lowlevel_cfg "${tone_adsl}" "${tone_vdsl}"
 169
 170         service_start /sbin/vdsl_cpe_control \
 171                         -i `echo $xtse_adsl | sed "s/ /_/g"` \
 172                         -n /sbin/dsl_notify.sh \
 173                         -f /lib/firmware/${firmware} \
 174                         -a /tmp/adsl.scr \
 175                         -A /tmp/vdsl.scr \
 176                         -l /tmp/lowlevel.cfg \
 177                         -M ${mode}
 178 }
 179
 180 stop() {
 181         DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \
 182         DSL_INTERFACE_STATUS="DOWN" \
 183                 /sbin/dsl_notify.sh
 184
 185         service_stop /sbin/vdsl_cpe_control
 186 }