package/network/config/ltq-vdsl-app/files/dsl_control

   1 #!/bin/sh /etc/rc.common
   2 # Copyright (C) 2012 OpenWrt.org
   3
   4 # needs to start before the atm layer which starts at 50
   5 START=48
   6
   7 EXTRA_COMMANDS="status lucistat"
   8 EXTRA_HELP="    status  Get DSL status information
   9         lucistat  Get status information if lua friendly format"
  10
  11 SERVICE_DAEMONIZE=1
  12 SERVICE_WRITE_PID=1
  13
  14 . /lib/functions/lantiq_dsl.sh
  15 XDSL_CTRL=vdsl_cpe_control
  16
  17 # G.992.1 Annex A
  18 # G.992.2 Annex A
  19 # G.992.3 Annex A
  20 # G.992.4 Annex A
  21 # G.992.5 Annex A
  22 # G.993.2 Annex A/B/C
  23 xtse_adsl_a="04 01 04 01 00 01 00 00"
  24
  25 # G.992.1 Annex B
  26 # G.992.3 Annex B
  27 # G.992.5 Annex B
  28 # G.993.2 Annex A/B/C
  29 xtse_adsl_b="10 00 10 00 00 04 00 00"
  30
  31 # G.992.1 Annex B
  32 # G.992.3 Annex B
  33 # G.992.3 Annex J
  34 # G.992.5 Annex B
  35 # G.992.5 Annex J
  36 # G.993.2 Annex A/B/C
  37 xtse_adsl_j="10 00 10 40 00 04 01 00"
  38
  39 xtse_vdsl="00 00 00 00 00 00 00 07"
  40
  41 xdsl_scr() {
  42         val=`echo $2 | sed "s/ / 0x/g"`
  43         echo "[WaitForConfiguration]={
  44 #G997XTUSEC_g997xtusecs 0x$val
  45 }
  46
  47 [WaitForLinkActivate]={
  48 }
  49
  50 [WaitForRestart]={
  51 }
  52
  53 [Common]={
  54 }" > /tmp/$1.scr
  55 }
  56
  57 # A43
  58 tone_adsl_a="0x142"
  59 tone_vdsl_a="0x142"
  60
  61 # A43 + V43
  62 tone_adsl_av="0x142"
  63 tone_vdsl_av="0x146"
  64
  65 # B43
  66 tone_adsl_b="0x1"
  67 tone_vdsl_b="0x1"
  68
  69 # B43 + V43
  70 tone_adsl_bv="0x1"
  71 tone_vdsl_bv="0x5"
  72
  73 lowlevel_cfg() {
  74         echo "# VRX Low Level Configuration File
  75 #
  76 # Parameters must be separated by tabs or spaces.
  77 # Empty lines and comments will be ignored.
  78 #
  79
  80 # nFilter
  81 #
  82 # NA     = -1
  83 # OFF    = 0
  84 # ISDN   = 1
  85 # POTS   = 2
  86 # POTS_2 = 3
  87 # POTS_3 = 4
  88 #
  89 #  (dec)
  90     -1
  91
  92 # nHsToneGroupMode nHsToneGroup_A       nHsToneGroup_V    nHsToneGroup_AV
  93 #
  94 # NA     = -1      NA         = -1      see               see
  95 # AUTO   = 0       VDSL2_B43  = 0x0001  nHsToneGroup_A    nHsToneGroup_A
  96 # MANUAL = 1       VDSL2_A43  = 0x0002
  97 #                  VDSL2_V43  = 0x0004
  98 #                  VDSL1_V43P = 0x0008
  99 #                  VDSL1_V43I = 0x0010
 100 #                  ADSL1_C43  = 0x0020
 101 #                  ADSL2_J43  = 0x0040
 102 #                  ADSL2_B43C = 0x0080
 103 #                  ADSL2_A43C = 0x0100
 104 #
 105 #  (dec)           (hex)                (hex)             (hex)
 106      1             $1                   $2               0x0
 107
 108 #   nBaseAddr     nIrqNum
 109 #
 110 #     (hex)        (dec)
 111     0x1e116000      63
 112
 113 # nUtopiaPhyAdr   nUtopiaBusWidth      nPosPhyParity
 114 #                 default(16b) = 0     NA   = -1
 115 #                 8-bit        = 1     ODD  = 0
 116 #                 16-bit       = 2
 117 #
 118 #
 119 #    (hex)            (dec)                (dec)
 120       0xFF              0                    0
 121
 122 # bNtrEnable
 123 #
 124 #  (dec)
 125     0" > /tmp/lowlevel.cfg
 126 }
 127
 128 start() {
 129         local annex
 130         local firmware
 131         local tone
 132         local tone_adsl
 133         local tone_vdsl
 134         local xtse_adsl
 135         local mode
 136
 137         config_load network
 138         config_get tone dsl tone
 139         config_get annex dsl annex
 140         config_get firmware dsl firmware
 141         config_get xfer_mode dsl xfer_mode
 142
 143         [ -z "${xfer_mode}" ] && xfer_mode=ptm
 144
 145         case "${xfer_mode}" in
 146         atm)
 147                 insmod ltq_atm_vr9
 148                 mode=1
 149                 ;;
 150         *)
 151                 insmod ltq_ptm_vr9
 152                 mode=2
 153                 ;;
 154         esac
 155
 156         eval "xtse_adsl=\"\${xtse_adsl_$annex}\""
 157         [ -z "${xtse_adsl}" ] && xtse_adsl=$xtse_adsl_a
 158
 159         eval "tone_adsl=\"\${tone_adsl_$tone}\""
 160         [ -z "${tone_adsl}" ] && tone_adsl=$tone_adsl_av
 161
 162         eval "tone_vdsl=\"\${tone_vdsl_$tone}\""
 163         [ -z "${tone_vdsl}" ] && tone_vdsl=$tone_vdsl_av
 164
 165         [ -z "${firmware}" ] && firmware=/lib/firmware/vdsl.bin
 166         [ -f "${firmware}" ] || {
 167                 echo failed to find $firmware
 168                 return 1
 169         }
 170
 171         xdsl_scr adsl "${xtse_adsl}"
 172         xdsl_scr vdsl "${xtse_vdsl}"
 173         lowlevel_cfg "${tone_adsl}" "${tone_vdsl}"
 174
 175         service_start /sbin/vdsl_cpe_control \
 176                         -i `echo $xtse_adsl | sed "s/ /_/g"` \
 177                         -n /sbin/dsl_notify.sh \
 178                         -f ${firmware} \
 179                         -a /tmp/adsl.scr \
 180                         -A /tmp/vdsl.scr \
 181                         -l /tmp/lowlevel.cfg \
 182                         -M ${mode}
 183 }
 184
 185 stop() {
 186         DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \
 187         DSL_INTERFACE_STATUS="DOWN" \
 188                 /sbin/dsl_notify.sh
 189
 190         service_stop /sbin/vdsl_cpe_control
 191 }