#define len can_dlc
#endif
-#define ELM327_NAPI_WEIGHT 4
+#define CAN327_NAPI_WEIGHT 4
-#define ELM327_SIZE_TXBUF 32
-#define ELM327_SIZE_RXBUF 1024
+#define CAN327_SIZE_TXBUF 32
+#define CAN327_SIZE_RXBUF 1024
-#define ELM327_CAN_CONFIG_SEND_SFF 0x8000
-#define ELM327_CAN_CONFIG_VARIABLE_DLC 0x4000
-#define ELM327_CAN_CONFIG_RECV_BOTH_SFF_EFF 0x2000
-#define ELM327_CAN_CONFIG_BAUDRATE_MULT_8_7 0x1000
+#define CAN327_CAN_CONFIG_SEND_SFF 0x8000
+#define CAN327_CAN_CONFIG_VARIABLE_DLC 0x4000
+#define CAN327_CAN_CONFIG_RECV_BOTH_SFF_EFF 0x2000
+#define CAN327_CAN_CONFIG_BAUDRATE_MULT_8_7 0x1000
-#define ELM327_DUMMY_CHAR 'y'
-#define ELM327_DUMMY_STRING "y"
-#define ELM327_READY_CHAR '>'
+#define CAN327_DUMMY_CHAR 'y'
+#define CAN327_DUMMY_STRING "y"
+#define CAN327_READY_CHAR '>'
/* Bits in elm->cmds_todo */
-enum elm327_tx_do {
- ELM327_TX_DO_CAN_DATA = 0,
- ELM327_TX_DO_CANID_11BIT,
- ELM327_TX_DO_CANID_29BIT_LOW,
- ELM327_TX_DO_CANID_29BIT_HIGH,
- ELM327_TX_DO_CAN_CONFIG_PART2,
- ELM327_TX_DO_CAN_CONFIG,
- ELM327_TX_DO_RESPONSES,
- ELM327_TX_DO_SILENT_MONITOR,
- ELM327_TX_DO_INIT
+enum can327_tx_do {
+ CAN327_TX_DO_CAN_DATA = 0,
+ CAN327_TX_DO_CANID_11BIT,
+ CAN327_TX_DO_CANID_29BIT_LOW,
+ CAN327_TX_DO_CANID_29BIT_HIGH,
+ CAN327_TX_DO_CAN_CONFIG_PART2,
+ CAN327_TX_DO_CAN_CONFIG,
+ CAN327_TX_DO_RESPONSES,
+ CAN327_TX_DO_SILENT_MONITOR,
+ CAN327_TX_DO_INIT
};
struct can327 {
struct can_rx_offload offload;
/* TTY buffers */
- u8 txbuf[ELM327_SIZE_TXBUF];
- u8 rxbuf[ELM327_SIZE_RXBUF];
+ u8 txbuf[CAN327_SIZE_TXBUF];
+ u8 rxbuf[CAN327_SIZE_RXBUF];
/* Per-channel lock */
spinlock_t lock;
/* State machine */
enum {
- ELM327_STATE_NOTINIT = 0,
- ELM327_STATE_GETDUMMYCHAR,
- ELM327_STATE_GETPROMPT,
- ELM327_STATE_RECEIVING,
+ CAN327_STATE_NOTINIT = 0,
+ CAN327_STATE_GETDUMMYCHAR,
+ CAN327_STATE_GETPROMPT,
+ CAN327_STATE_RECEIVING,
} state;
/* Things we have yet to send */
bool uart_side_failure;
};
-static inline void elm327_uart_side_failure(struct can327 *elm);
+static inline void can327_uart_side_failure(struct can327 *elm);
-static void elm327_send(struct can327 *elm, const void *buf, size_t len)
+static void can327_send(struct can327 *elm, const void *buf, size_t len)
{
int written;
netdev_err(elm->dev,
"Failed to write to tty %s.\n",
elm->tty->name);
- elm327_uart_side_failure(elm);
+ can327_uart_side_failure(elm);
return;
}
}
/* Take the ELM327 out of almost any state and back into command mode.
- * We send ELM327_DUMMY_CHAR which will either abort any running
+ * We send CAN327_DUMMY_CHAR which will either abort any running
* operation, or be echoed back to us in case we're already in command
* mode.
*/
-static void elm327_kick_into_cmd_mode(struct can327 *elm)
+static void can327_kick_into_cmd_mode(struct can327 *elm)
{
lockdep_assert_held(&elm->lock);
- if (elm->state != ELM327_STATE_GETDUMMYCHAR &&
- elm->state != ELM327_STATE_GETPROMPT) {
- elm327_send(elm, ELM327_DUMMY_STRING, 1);
+ if (elm->state != CAN327_STATE_GETDUMMYCHAR &&
+ elm->state != CAN327_STATE_GETPROMPT) {
+ can327_send(elm, CAN327_DUMMY_STRING, 1);
- elm->state = ELM327_STATE_GETDUMMYCHAR;
+ elm->state = CAN327_STATE_GETDUMMYCHAR;
}
}
/* Schedule a CAN frame and necessary config changes to be sent to the TTY. */
-static void elm327_send_frame(struct can327 *elm, struct can_frame *frame)
+static void can327_send_frame(struct can327 *elm, struct can_frame *frame)
{
lockdep_assert_held(&elm->lock);
& CAN_EFF_FLAG) {
elm->can_config = (frame->can_id & CAN_EFF_FLAG
? 0
- : ELM327_CAN_CONFIG_SEND_SFF)
- | ELM327_CAN_CONFIG_VARIABLE_DLC
- | ELM327_CAN_CONFIG_RECV_BOTH_SFF_EFF
+ : CAN327_CAN_CONFIG_SEND_SFF)
+ | CAN327_CAN_CONFIG_VARIABLE_DLC
+ | CAN327_CAN_CONFIG_RECV_BOTH_SFF_EFF
| elm->can_bitrate_divisor;
- set_bit(ELM327_TX_DO_CAN_CONFIG, &elm->cmds_todo);
+ set_bit(CAN327_TX_DO_CAN_CONFIG, &elm->cmds_todo);
}
if (frame->can_id & CAN_EFF_FLAG) {
- clear_bit(ELM327_TX_DO_CANID_11BIT, &elm->cmds_todo);
- set_bit(ELM327_TX_DO_CANID_29BIT_LOW, &elm->cmds_todo);
- set_bit(ELM327_TX_DO_CANID_29BIT_HIGH, &elm->cmds_todo);
+ clear_bit(CAN327_TX_DO_CANID_11BIT, &elm->cmds_todo);
+ set_bit(CAN327_TX_DO_CANID_29BIT_LOW, &elm->cmds_todo);
+ set_bit(CAN327_TX_DO_CANID_29BIT_HIGH, &elm->cmds_todo);
} else {
- set_bit(ELM327_TX_DO_CANID_11BIT, &elm->cmds_todo);
- clear_bit(ELM327_TX_DO_CANID_29BIT_LOW, &elm->cmds_todo);
- clear_bit(ELM327_TX_DO_CANID_29BIT_HIGH, &elm->cmds_todo);
+ set_bit(CAN327_TX_DO_CANID_11BIT, &elm->cmds_todo);
+ clear_bit(CAN327_TX_DO_CANID_29BIT_LOW, &elm->cmds_todo);
+ clear_bit(CAN327_TX_DO_CANID_29BIT_HIGH, &elm->cmds_todo);
}
}
/* Schedule the CAN frame itself. */
elm->can_frame_to_send = *frame;
- set_bit(ELM327_TX_DO_CAN_DATA, &elm->cmds_todo);
+ set_bit(CAN327_TX_DO_CAN_DATA, &elm->cmds_todo);
- elm327_kick_into_cmd_mode(elm);
+ can327_kick_into_cmd_mode(elm);
}
/* ELM327 initialisation sequence.
- * The line length is limited by the buffer in elm327_handle_prompt().
+ * The line length is limited by the buffer in can327_handle_prompt().
*/
-static char *elm327_init_script[] = {
+static char *can327_init_script[] = {
"AT WS\r", /* v1.0: Warm Start */
"AT PP FF OFF\r", /* v1.0: All Programmable Parameters Off */
"AT M0\r", /* v1.0: Memory Off */
NULL
};
-static void elm327_init(struct can327 *elm)
+static void can327_init_device(struct can327 *elm)
{
lockdep_assert_held(&elm->lock);
- elm->state = ELM327_STATE_NOTINIT;
+ elm->state = CAN327_STATE_NOTINIT;
elm->can_frame_to_send.can_id = 0x7df; /* ELM327 HW default */
elm->rxfill = 0;
elm->drop_next_line = 0;
* limit the user to the right values.
*/
elm->can_bitrate_divisor = 500000 / elm->can.bittiming.bitrate;
- elm->can_config = ELM327_CAN_CONFIG_SEND_SFF
- | ELM327_CAN_CONFIG_VARIABLE_DLC
- | ELM327_CAN_CONFIG_RECV_BOTH_SFF_EFF
+ elm->can_config = CAN327_CAN_CONFIG_SEND_SFF
+ | CAN327_CAN_CONFIG_VARIABLE_DLC
+ | CAN327_CAN_CONFIG_RECV_BOTH_SFF_EFF
| elm->can_bitrate_divisor;
/* Configure ELM327 and then start monitoring */
- elm->next_init_cmd = &elm327_init_script[0];
- set_bit(ELM327_TX_DO_INIT, &elm->cmds_todo);
- set_bit(ELM327_TX_DO_SILENT_MONITOR, &elm->cmds_todo);
- set_bit(ELM327_TX_DO_RESPONSES, &elm->cmds_todo);
- set_bit(ELM327_TX_DO_CAN_CONFIG, &elm->cmds_todo);
+ elm->next_init_cmd = &can327_init_script[0];
+ set_bit(CAN327_TX_DO_INIT, &elm->cmds_todo);
+ set_bit(CAN327_TX_DO_SILENT_MONITOR, &elm->cmds_todo);
+ set_bit(CAN327_TX_DO_RESPONSES, &elm->cmds_todo);
+ set_bit(CAN327_TX_DO_CAN_CONFIG, &elm->cmds_todo);
- elm327_kick_into_cmd_mode(elm);
+ can327_kick_into_cmd_mode(elm);
}
-static void elm327_feed_frame_to_netdev(struct can327 *elm,
+static void can327_feed_frame_to_netdev(struct can327 *elm,
struct sk_buff *skb)
{
lockdep_assert_held(&elm->lock);
}
/* Called when we're out of ideas and just want it all to end. */
-static inline void elm327_uart_side_failure(struct can327 *elm)
+static inline void can327_uart_side_failure(struct can327 *elm)
{
struct can_frame *frame;
struct sk_buff *skb;
return;
frame->can_id |= CAN_ERR_BUSOFF;
- elm327_feed_frame_to_netdev(elm, skb);
+ can327_feed_frame_to_netdev(elm, skb);
}
/* Compares a byte buffer (non-NUL terminated) to the payload part of a string,
* The reason to use strings is so we can easily include them in the C code,
* and to avoid hardcoding lengths.
*/
-static inline bool elm327_rxbuf_cmp(const u8 *buf, size_t nbytes, const char *reference)
+static inline bool can327_rxbuf_cmp(const u8 *buf, size_t nbytes, const char *reference)
{
size_t ref_len = strlen(reference);
return (nbytes == ref_len) && !memcmp(buf, reference, ref_len);
}
-static void elm327_parse_error(struct can327 *elm, size_t len)
+static void can327_parse_error(struct can327 *elm, size_t len)
{
struct can_frame *frame;
struct sk_buff *skb;
return;
/* Filter possible error messages based on length of RX'd line */
- if (elm327_rxbuf_cmp(elm->rxbuf, len, "UNABLE TO CONNECT")) {
+ if (can327_rxbuf_cmp(elm->rxbuf, len, "UNABLE TO CONNECT")) {
netdev_err(elm->dev,
"ELM327 reported UNABLE TO CONNECT. Please check your setup.\n");
- } else if (elm327_rxbuf_cmp(elm->rxbuf, len, "BUFFER FULL")) {
+ } else if (can327_rxbuf_cmp(elm->rxbuf, len, "BUFFER FULL")) {
/* This will only happen if the last data line was complete.
- * Otherwise, elm327_parse_frame() will heuristically
+ * Otherwise, can327_parse_frame() will heuristically
* emit this kind of error frame instead.
*/
frame->can_id |= CAN_ERR_CRTL;
frame->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
- } else if (elm327_rxbuf_cmp(elm->rxbuf, len, "BUS ERROR")) {
+ } else if (can327_rxbuf_cmp(elm->rxbuf, len, "BUS ERROR")) {
frame->can_id |= CAN_ERR_BUSERROR;
- } else if (elm327_rxbuf_cmp(elm->rxbuf, len, "CAN ERROR")) {
+ } else if (can327_rxbuf_cmp(elm->rxbuf, len, "CAN ERROR")) {
frame->can_id |= CAN_ERR_PROT;
- } else if (elm327_rxbuf_cmp(elm->rxbuf, len, "<RX ERROR")) {
+ } else if (can327_rxbuf_cmp(elm->rxbuf, len, "<RX ERROR")) {
frame->can_id |= CAN_ERR_PROT;
- } else if (elm327_rxbuf_cmp(elm->rxbuf, len, "BUS BUSY")) {
+ } else if (can327_rxbuf_cmp(elm->rxbuf, len, "BUS BUSY")) {
frame->can_id |= CAN_ERR_PROT;
frame->data[2] = CAN_ERR_PROT_OVERLOAD;
- } else if (elm327_rxbuf_cmp(elm->rxbuf, len, "FB ERROR")) {
+ } else if (can327_rxbuf_cmp(elm->rxbuf, len, "FB ERROR")) {
frame->can_id |= CAN_ERR_PROT;
frame->data[2] = CAN_ERR_PROT_TX;
} else if (len == 5 && !memcmp(elm->rxbuf, "ERR", 3)) {
*/
}
- elm327_feed_frame_to_netdev(elm, skb);
+ can327_feed_frame_to_netdev(elm, skb);
}
/* Parse CAN frames coming as ASCII from ELM327.
*
* We will use the spaces and line length to guess the format.
*/
-static int elm327_parse_frame(struct can327 *elm, size_t len)
+static int can327_parse_frame(struct can327 *elm, size_t len)
{
struct can_frame *frame;
struct sk_buff *skb;
frame->can_id = CAN_ERR_FLAG | CAN_ERR_CRTL;
frame->len = CAN_ERR_DLC;
frame->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
- elm327_feed_frame_to_netdev(elm, skb);
+ can327_feed_frame_to_netdev(elm, skb);
/* Signal failure to parse.
* The line will be re-parsed as an error line, which will fail.
}
/* Feed the frame to the network layer. */
- elm327_feed_frame_to_netdev(elm, skb);
+ can327_feed_frame_to_netdev(elm, skb);
return 0;
}
-static void elm327_parse_line(struct can327 *elm, size_t len)
+static void can327_parse_line(struct can327 *elm, size_t len)
{
lockdep_assert_held(&elm->lock);
}
/* Regular parsing */
- if (elm->state == ELM327_STATE_RECEIVING &&
- elm327_parse_frame(elm, len)) {
+ if (elm->state == CAN327_STATE_RECEIVING &&
+ can327_parse_frame(elm, len)) {
/* Parse an error line. */
- elm327_parse_error(elm, len);
+ can327_parse_error(elm, len);
/* Start afresh. */
- elm327_kick_into_cmd_mode(elm);
+ can327_kick_into_cmd_mode(elm);
}
}
-static void elm327_handle_prompt(struct can327 *elm)
+static void can327_handle_prompt(struct can327 *elm)
{
struct can_frame *frame = &elm->can_frame_to_send;
/* Size this buffer for the largest ELM327 line we may generate,
* which is currently an 8 byte CAN frame's payload hexdump.
- * Items in elm327_init_script must fit here, too!
+ * Items in can327_init_script must fit here, too!
*/
char local_txbuf[sizeof("0102030405060708\r")];
if (!elm->cmds_todo) {
/* Enter CAN monitor mode */
- elm327_send(elm, "ATMA\r", 5);
- elm->state = ELM327_STATE_RECEIVING;
+ can327_send(elm, "ATMA\r", 5);
+ elm->state = CAN327_STATE_RECEIVING;
/* We will be in the default state once this command is
* sent, so enable the TX packet queue.
}
/* Reconfigure ELM327 step by step as indicated by elm->cmds_todo */
- if (test_bit(ELM327_TX_DO_INIT, &elm->cmds_todo)) {
+ if (test_bit(CAN327_TX_DO_INIT, &elm->cmds_todo)) {
snprintf(local_txbuf, sizeof(local_txbuf),
"%s",
*elm->next_init_cmd);
elm->next_init_cmd++;
if (!(*elm->next_init_cmd)) {
- clear_bit(ELM327_TX_DO_INIT, &elm->cmds_todo);
+ clear_bit(CAN327_TX_DO_INIT, &elm->cmds_todo);
/* Init finished. */
}
- } else if (test_and_clear_bit(ELM327_TX_DO_SILENT_MONITOR, &elm->cmds_todo)) {
+ } else if (test_and_clear_bit(CAN327_TX_DO_SILENT_MONITOR, &elm->cmds_todo)) {
snprintf(local_txbuf, sizeof(local_txbuf),
"ATCSM%i\r",
!!(elm->can.ctrlmode & CAN_CTRLMODE_LISTENONLY));
- } else if (test_and_clear_bit(ELM327_TX_DO_RESPONSES, &elm->cmds_todo)) {
+ } else if (test_and_clear_bit(CAN327_TX_DO_RESPONSES, &elm->cmds_todo)) {
snprintf(local_txbuf, sizeof(local_txbuf),
"ATR%i\r",
!(elm->can.ctrlmode & CAN_CTRLMODE_LISTENONLY));
- } else if (test_and_clear_bit(ELM327_TX_DO_CAN_CONFIG, &elm->cmds_todo)) {
+ } else if (test_and_clear_bit(CAN327_TX_DO_CAN_CONFIG, &elm->cmds_todo)) {
snprintf(local_txbuf, sizeof(local_txbuf),
"ATPC\r");
- set_bit(ELM327_TX_DO_CAN_CONFIG_PART2, &elm->cmds_todo);
+ set_bit(CAN327_TX_DO_CAN_CONFIG_PART2, &elm->cmds_todo);
- } else if (test_and_clear_bit(ELM327_TX_DO_CAN_CONFIG_PART2, &elm->cmds_todo)) {
+ } else if (test_and_clear_bit(CAN327_TX_DO_CAN_CONFIG_PART2, &elm->cmds_todo)) {
snprintf(local_txbuf, sizeof(local_txbuf),
"ATPB%04X\r",
elm->can_config);
- } else if (test_and_clear_bit(ELM327_TX_DO_CANID_29BIT_HIGH, &elm->cmds_todo)) {
+ } else if (test_and_clear_bit(CAN327_TX_DO_CANID_29BIT_HIGH, &elm->cmds_todo)) {
snprintf(local_txbuf, sizeof(local_txbuf),
"ATCP%02X\r",
(frame->can_id & CAN_EFF_MASK) >> 24);
- } else if (test_and_clear_bit(ELM327_TX_DO_CANID_29BIT_LOW, &elm->cmds_todo)) {
+ } else if (test_and_clear_bit(CAN327_TX_DO_CANID_29BIT_LOW, &elm->cmds_todo)) {
snprintf(local_txbuf, sizeof(local_txbuf),
"ATSH%06X\r",
frame->can_id & CAN_EFF_MASK & ((1 << 24) - 1));
- } else if (test_and_clear_bit(ELM327_TX_DO_CANID_11BIT, &elm->cmds_todo)) {
+ } else if (test_and_clear_bit(CAN327_TX_DO_CANID_11BIT, &elm->cmds_todo)) {
snprintf(local_txbuf, sizeof(local_txbuf),
"ATSH%03X\r",
frame->can_id & CAN_SFF_MASK);
- } else if (test_and_clear_bit(ELM327_TX_DO_CAN_DATA, &elm->cmds_todo)) {
+ } else if (test_and_clear_bit(CAN327_TX_DO_CAN_DATA, &elm->cmds_todo)) {
if (frame->can_id & CAN_RTR_FLAG) {
/* Send an RTR frame. Their DLC is fixed.
* Some chips don't send them at all.
}
elm->drop_next_line = 1;
- elm->state = ELM327_STATE_RECEIVING;
+ elm->state = CAN327_STATE_RECEIVING;
/* We will be in the default state once this command is
* sent, so enable the TX packet queue.
netif_wake_queue(elm->dev);
}
- elm327_send(elm, local_txbuf, strlen(local_txbuf));
+ can327_send(elm, local_txbuf, strlen(local_txbuf));
}
-static bool elm327_is_ready_char(char c)
+static bool can327_is_ready_char(char c)
{
/* Bits 0xc0 are sometimes set (randomly), hence the mask.
* Probably bad hardware.
*/
- return (c & 0x3f) == ELM327_READY_CHAR;
+ return (c & 0x3f) == CAN327_READY_CHAR;
}
-static void elm327_drop_bytes(struct can327 *elm, size_t i)
+static void can327_drop_bytes(struct can327 *elm, size_t i)
{
lockdep_assert_held(&elm->lock);
- memmove(&elm->rxbuf[0], &elm->rxbuf[i], ELM327_SIZE_RXBUF - i);
+ memmove(&elm->rxbuf[0], &elm->rxbuf[i], CAN327_SIZE_RXBUF - i);
elm->rxfill -= i;
}
-static void elm327_parse_rxbuf(struct can327 *elm, size_t first_new_char_idx)
+static void can327_parse_rxbuf(struct can327 *elm, size_t first_new_char_idx)
{
size_t len, pos;
lockdep_assert_held(&elm->lock);
switch (elm->state) {
- case ELM327_STATE_NOTINIT:
+ case CAN327_STATE_NOTINIT:
elm->rxfill = 0;
break;
- case ELM327_STATE_GETDUMMYCHAR:
+ case CAN327_STATE_GETDUMMYCHAR:
/* Wait for 'y' or '>' */
for (pos = 0; pos < elm->rxfill; pos++) {
- if (elm->rxbuf[pos] == ELM327_DUMMY_CHAR) {
- elm327_send(elm, "\r", 1);
- elm->state = ELM327_STATE_GETPROMPT;
+ if (elm->rxbuf[pos] == CAN327_DUMMY_CHAR) {
+ can327_send(elm, "\r", 1);
+ elm->state = CAN327_STATE_GETPROMPT;
pos++;
break;
- } else if (elm327_is_ready_char(elm->rxbuf[pos])) {
- elm327_send(elm, ELM327_DUMMY_STRING, 1);
+ } else if (can327_is_ready_char(elm->rxbuf[pos])) {
+ can327_send(elm, CAN327_DUMMY_STRING, 1);
pos++;
break;
}
}
- elm327_drop_bytes(elm, pos);
+ can327_drop_bytes(elm, pos);
break;
- case ELM327_STATE_GETPROMPT:
+ case CAN327_STATE_GETPROMPT:
/* Wait for '>' */
- if (elm327_is_ready_char(elm->rxbuf[elm->rxfill - 1]))
- elm327_handle_prompt(elm);
+ if (can327_is_ready_char(elm->rxbuf[elm->rxfill - 1]))
+ can327_handle_prompt(elm);
elm->rxfill = 0;
break;
- case ELM327_STATE_RECEIVING:
+ case CAN327_STATE_RECEIVING:
/* Find <CR> delimiting feedback lines. */
len = first_new_char_idx;
while (len < elm->rxfill && elm->rxbuf[len] != '\r')
len++;
- if (len == ELM327_SIZE_RXBUF) {
+ if (len == CAN327_SIZE_RXBUF) {
/* Assume the buffer ran full with garbage.
* Did we even connect at the right baud rate?
*/
netdev_err(elm->dev,
"RX buffer overflow. Faulty ELM327 or UART?\n");
- elm327_uart_side_failure(elm);
+ can327_uart_side_failure(elm);
} else if (len == elm->rxfill) {
- if (elm327_is_ready_char(elm->rxbuf[elm->rxfill - 1])) {
+ if (can327_is_ready_char(elm->rxbuf[elm->rxfill - 1])) {
/* The ELM327's AT ST response timeout ran out,
* so we got a prompt.
* Clear RX buffer and restart listening.
*/
elm->rxfill = 0;
- elm327_handle_prompt(elm);
+ can327_handle_prompt(elm);
}
/* No <CR> found - we haven't received a full line yet.
*/
} else {
/* We have a full line to parse. */
- elm327_parse_line(elm, len);
+ can327_parse_line(elm, len);
/* Remove parsed data from RX buffer. */
- elm327_drop_bytes(elm, len + 1);
+ can327_drop_bytes(elm, len + 1);
/* More data to parse? */
if (elm->rxfill)
- elm327_parse_rxbuf(elm, 0);
+ can327_parse_rxbuf(elm, 0);
}
}
}
return err;
}
- elm327_init(elm);
+ can327_init_device(elm);
spin_unlock_bh(&elm->lock);
#if LINUX_VERSION_CODE < KERNEL_VERSION(5,10,0)
elm->offload.mailbox_read = can327_mailbox_read;
- err = can_rx_offload_add_fifo(dev, &elm->offload, ELM327_NAPI_WEIGHT);
+ err = can_rx_offload_add_fifo(dev, &elm->offload, CAN327_NAPI_WEIGHT);
#else
- err = can_rx_offload_add_manual(dev, &elm->offload, ELM327_NAPI_WEIGHT);
+ err = can_rx_offload_add_manual(dev, &elm->offload, CAN327_NAPI_WEIGHT);
#endif
if (err) {
close_candev(dev);
/* Interrupt whatever the ELM327 is doing right now */
spin_lock_bh(&elm->lock);
- elm327_send(elm, ELM327_DUMMY_STRING, 1);
+ can327_send(elm, CAN327_DUMMY_STRING, 1);
spin_unlock_bh(&elm->lock);
netif_stop_queue(dev);
* See Documentation/networking/netdevices.txt
*/
spin_lock(&elm->lock);
- elm327_send_frame(elm, frame);
+ can327_send_frame(elm, frame);
spin_unlock(&elm->lock);
dev->stats.tx_packets++;
['0'] = true, true, true, true, true,
['5'] = true, true, true, true, true,
['<'] = true,
- [ELM327_READY_CHAR] = true,
+ [CAN327_READY_CHAR] = true,
['?'] = true,
['A'] = true, true, true, true, true, true, true,
['H'] = true, true, true, true, true, true, true,
['a'] = true,
['b'] = true,
['v'] = true,
- [ELM327_DUMMY_CHAR] = true,
+ [CAN327_DUMMY_CHAR] = true,
};
- BUILD_BUG_ON(ELM327_DUMMY_CHAR >= 'z');
+ BUILD_BUG_ON(CAN327_DUMMY_CHAR >= 'z');
return (c < ARRAY_SIZE(lut_char_is_valid) &&
lut_char_is_valid[c]);
spin_lock_bh(&elm->lock);
- /* Store old rxfill, so elm327_parse_rxbuf() will have
+ /* Store old rxfill, so can327_parse_rxbuf() will have
* the option of skipping already checked characters.
*/
first_new_char_idx = elm->rxfill;
- while (count-- && elm->rxfill < ELM327_SIZE_RXBUF) {
+ while (count-- && elm->rxfill < CAN327_SIZE_RXBUF) {
if (fp && *fp++) {
netdev_err(elm->dev, "Error in received character stream. Check your wiring.");
- elm327_uart_side_failure(elm);
+ can327_uart_side_failure(elm);
spin_unlock_bh(&elm->lock);
return;
netdev_err(elm->dev,
"Received illegal character %02x.\n",
*cp);
- elm327_uart_side_failure(elm);
+ can327_uart_side_failure(elm);
spin_unlock_bh(&elm->lock);
return;
if (count >= 0) {
netdev_err(elm->dev, "Receive buffer overflowed. Bad chip or wiring? count = %i", count);
- elm327_uart_side_failure(elm);
+ can327_uart_side_failure(elm);
spin_unlock_bh(&elm->lock);
return;
}
- elm327_parse_rxbuf(elm, first_new_char_idx);
+ can327_parse_rxbuf(elm, first_new_char_idx);
spin_unlock_bh(&elm->lock);
}
netdev_err(elm->dev,
"Failed to write to tty %s.\n",
elm->tty->name);
- elm327_uart_side_failure(elm);
+ can327_uart_side_failure(elm);
spin_unlock_bh(&elm->lock);
return;
projects / elmcan.git / commitdiff