path: root/target/linux/xburst/patches-3.3/0012-MIPS-JZ4740-Add-cpufreq-support.patch

From d0f0d5739a31c12d349980ed05a670fa1e84696d Mon Sep 17 00:00:00 2001
From: Maarten ter Huurne <maarten@treewalker.org>
Date: Wed, 16 Mar 2011 03:16:04 +0100
Subject: [PATCH 12/21] MIPS: JZ4740: Add cpufreq support.

This is a squashed version of Uli's driver that was further developed in the opendingux-kernel repository.
---
 arch/mips/Kconfig                |    1 +
 arch/mips/jz4740/Makefile        |    1 +
 arch/mips/jz4740/cpufreq.c       |  226 ++++++++++++++++++++++++++++++++++++++
 arch/mips/kernel/cpufreq/Kconfig |   13 ++-
 4 files changed, 240 insertions(+), 1 deletions(-)
 create mode 100644 arch/mips/jz4740/cpufreq.c

--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -212,6 +212,7 @@ config MACH_JZ4740
 	select HAVE_PWM
 	select HAVE_CLK
 	select GENERIC_IRQ_CHIP
+	select CPU_SUPPORTS_CPUFREQ
 
 config LANTIQ
 	bool "Lantiq based platforms"
--- a/arch/mips/jz4740/Makefile
+++ b/arch/mips/jz4740/Makefile
@@ -16,5 +16,6 @@ obj-$(CONFIG_JZ4740_QI_LB60)	+= board-qi
 # PM support
 
 obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_CPU_FREQ_JZ) += cpufreq.o
 
 ccflags-y := -Werror -Wall
--- /dev/null
+++ b/arch/mips/jz4740/cpufreq.c
@@ -0,0 +1,226 @@
+/*
+ * linux/arch/mips/jz4740/cpufreq.c
+ *
+ * cpufreq driver for JZ4740
+ *
+ * Copyright (c) 2010       Ulrich Hecht <ulrich.hecht@gmail.com>
+ * Copyright (c) 2010       Maarten ter Huurne <maarten@treewalker.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <linux/cpufreq.h>
+
+#include <linux/clk.h>
+#include <asm/mach-jz4740/base.h>
+
+#include "clock.h"
+
+#define DEBUG_CPUFREQ
+
+#ifdef DEBUG_CPUFREQ
+#define dprintk(X...) printk(KERN_INFO X)
+#else
+#define dprintk(X...) do { } while(0)
+#endif
+
+#define HCLK_MIN 30000
+/* TODO: The maximum MCLK most likely depends on the SDRAM chips used,
+         so it is board-specific. */
+#define MCLK_MAX 140000
+
+/* Same as jz_clk_main_divs, but with 24 and 32 removed because the hardware
+   spec states those dividers must not be used for CCLK or HCLK. */
+static const unsigned int jz4740_freq_cpu_divs[] = {1, 2, 3, 4, 6, 8, 12, 16};
+
+struct jz4740_freq_percpu_info {
+	unsigned int pll_rate;
+	struct cpufreq_frequency_table table[
+		ARRAY_SIZE(jz4740_freq_cpu_divs) + 1];
+};
+
+static struct clk *pll;
+static struct clk *cclk;
+
+static struct jz4740_freq_percpu_info jz4740_freq_info;
+
+static struct cpufreq_driver cpufreq_jz4740_driver;
+
+static void jz4740_freq_fill_table(struct cpufreq_policy *policy,
+				   unsigned int pll_rate)
+{
+	struct cpufreq_frequency_table *table = &jz4740_freq_info.table[0];
+	int i;
+
+#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
+	/* for showing /sys/devices/system/cpu/cpuX/cpufreq/stats/ */
+	static bool init = false;
+	if (init)
+		cpufreq_frequency_table_put_attr(policy->cpu);
+	else
+		init = true;
+#endif
+
+	jz4740_freq_info.pll_rate = pll_rate;
+
+	for (i = 0; i < ARRAY_SIZE(jz4740_freq_cpu_divs); i++) {
+		unsigned int freq = pll_rate / jz4740_freq_cpu_divs[i];
+		if (freq < HCLK_MIN) break;
+		table[i].index = i;
+		table[i].frequency = freq;
+	}
+	table[i].index = i;
+	table[i].frequency = CPUFREQ_TABLE_END;
+
+	policy->min = table[i - 1].frequency;
+	policy->max = table[0].frequency;
+
+#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
+	cpufreq_frequency_table_get_attr(table, policy->cpu);
+#endif
+}
+
+static unsigned int jz4740_freq_get(unsigned int cpu)
+{
+	return clk_get_rate(cclk) / 1000;
+}
+
+static int jz4740_freq_verify(struct cpufreq_policy *policy)
+{
+	unsigned int new_pll;
+
+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+				     policy->cpuinfo.max_freq);
+
+	new_pll = clk_round_rate(pll, policy->max * 1000) / 1000;
+	if (jz4740_freq_info.pll_rate != new_pll)
+		jz4740_freq_fill_table(policy, new_pll);
+
+	return 0;
+}
+
+static int jz4740_freq_target(struct cpufreq_policy *policy,
+			  unsigned int target_freq,
+			  unsigned int relation)
+{
+	struct cpufreq_frequency_table *table = &jz4740_freq_info.table[0];
+	struct cpufreq_freqs freqs;
+	unsigned int new_index = 0;
+	unsigned int old_pll = clk_get_rate(pll) / 1000;
+	unsigned int new_pll = jz4740_freq_info.pll_rate;
+	int ret = 0;
+
+	if (cpufreq_frequency_table_target(policy, table,
+					   target_freq, relation, &new_index))
+		return -EINVAL;
+	freqs = (struct cpufreq_freqs) {
+		.old = jz4740_freq_get(policy->cpu),
+		.new = table[new_index].frequency,
+		.cpu = policy->cpu,
+		.flags = cpufreq_jz4740_driver.flags,
+	};
+	if (freqs.new != freqs.old || new_pll != old_pll) {
+		unsigned int cdiv, hdiv, mdiv, pdiv;
+		cdiv = jz4740_freq_cpu_divs[new_index];
+		hdiv = (cdiv == 3 || cdiv == 6) ? cdiv * 2 : cdiv * 3;
+		while (new_pll < HCLK_MIN * hdiv)
+			hdiv -= cdiv;
+		mdiv = hdiv;
+		if (new_pll > MCLK_MAX * mdiv) {
+			/* 4,4 performs better than 3,6 */
+			if (new_pll > MCLK_MAX * 4)
+				mdiv *= 2;
+			else
+				hdiv = mdiv = cdiv * 4;
+		}
+		pdiv = mdiv;
+		dprintk(KERN_INFO "%s: cclk %p, setting from %d to %d, "
+			"dividers %d, %d, %d, %d\n",
+			__FUNCTION__, cclk, freqs.old, freqs.new,
+			cdiv, hdiv, mdiv, pdiv);
+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+		ret = clk_main_set_dividers(new_pll == old_pll,
+					    cdiv, hdiv, mdiv, pdiv);
+		if (ret) {
+			dprintk(KERN_INFO "failed to set dividers\n");
+		} else if (new_pll != old_pll) {
+			dprintk(KERN_INFO "%s: pll %p, setting from %d to %d\n",
+				__FUNCTION__, pll, old_pll, new_pll);
+			ret = clk_set_rate(pll, new_pll * 1000);
+		}
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	}
+
+	return ret;
+}
+
+static int jz4740_cpufreq_driver_init(struct cpufreq_policy *policy)
+{
+	int ret;
+
+	dprintk(KERN_INFO "Jz4740 cpufreq driver\n");
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	pll = clk_get(NULL, "pll");
+	if (IS_ERR(pll)) {
+		ret = PTR_ERR(pll);
+		goto err_exit;
+	}
+
+	cclk = clk_get(NULL, "cclk");
+	if (IS_ERR(cclk)) {
+		ret = PTR_ERR(cclk);
+		goto err_clk_put_pll;
+	}
+
+	policy->cpuinfo.min_freq = HCLK_MIN;
+	policy->cpuinfo.max_freq = 500000;
+	policy->cpuinfo.transition_latency = 100000; /* in nanoseconds */
+	policy->cur = jz4740_freq_get(policy->cpu);
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	/* min and max are set by jz4740_freq_fill_table() */
+
+	jz4740_freq_fill_table(policy, clk_get_rate(pll) / 1000 /* in kHz */);
+
+	return 0;
+
+err_clk_put_pll:
+	clk_put(pll);
+err_exit:
+	return ret;
+}
+
+static struct cpufreq_driver cpufreq_jz4740_driver = {
+	.init	= jz4740_cpufreq_driver_init,
+	.verify	= jz4740_freq_verify,
+	.target	= jz4740_freq_target,
+	.get	= jz4740_freq_get,
+	.name	= "jz4740",
+};
+
+static int __init jz4740_cpufreq_init(void)
+{
+	return cpufreq_register_driver(&cpufreq_jz4740_driver);
+}
+
+static void __exit jz4740_cpufreq_exit(void)
+{
+	cpufreq_unregister_driver(&cpufreq_jz4740_driver);
+}
+
+module_init(jz4740_cpufreq_init);
+module_exit(jz4740_cpufreq_exit);
+
+MODULE_AUTHOR("Ulrich Hecht <ulrich.hecht@gmail.com>, "
+	      "Maarten ter Huurne <maarten@treewalker.org>");
+MODULE_DESCRIPTION("cpufreq driver for Jz4740");
+MODULE_LICENSE("GPL");
--- a/arch/mips/kernel/cpufreq/Kconfig
+++ b/arch/mips/kernel/cpufreq/Kconfig
@@ -8,7 +8,7 @@ config MIPS_EXTERNAL_TIMER
 config MIPS_CPUFREQ
 	bool
 	default y
-	depends on CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
+	depends on CPU_SUPPORTS_CPUFREQ
 
 if MIPS_CPUFREQ
 
@@ -24,6 +24,7 @@ config LOONGSON2_CPUFREQ
 	tristate "Loongson2 CPUFreq Driver"
 	select CPU_FREQ_TABLE
 	depends on MIPS_CPUFREQ
+	depends on MIPS_EXTERNAL_TIMER
 	help
 	  This option adds a CPUFreq driver for loongson processors which
 	  support software configurable cpu frequency.
@@ -34,6 +35,16 @@ config LOONGSON2_CPUFREQ
 
 	  If in doubt, say N.
 
+config CPU_FREQ_JZ
+	tristate "CPUfreq driver for JZ CPUs"
+	select CPU_FREQ_TABLE
+	depends on MACH_JZ4740
+	default n
+	help
+	  This enables the CPUfreq driver for JZ CPUs.
+
+	  If in doubt, say N.
+
 endif	# CPU_FREQ
 
 endmenu