path: root/target/linux/pxa-2.6/patches/001-pm.patch

diff -NurbwB linux-2.6.17/arch/arm/mach-pxa/pm.c linux-2.6.17-patched/arch/arm/mach-pxa/pm.c
--- linux-2.6.17/arch/arm/mach-pxa/pm.c	2006-06-17 18:49:35.000000000 -0700
+++ linux-2.6.17-patched/arch/arm/mach-pxa/pm.c	2006-09-11 10:58:41.000000000 -0700
@@ -10,35 +10,50 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License.
  */
+
 #include <linux/config.h>
 #include <linux/init.h>
-#include <linux/module.h>
-#include <linux/suspend.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/sysctl.h>
 #include <linux/errno.h>
-#include <linux/time.h>
 
 #include <asm/hardware.h>
 #include <asm/memory.h>
 #include <asm/system.h>
-#include <asm/arch/pm.h>
+#include <asm/leds.h>
+#include <asm/uaccess.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/lubbock.h>
 #include <asm/mach/time.h>
 
+/**/
+#include <linux/module.h>
+/**/
+//kirti
+#include <linux/delay.h>
+//kirti~
 
 /*
  * Debug macros
  */
-#undef DEBUG
+#define DEBUG
+
+extern void pxa_cpu_suspend(void);
+extern void pxa_cpu_resume(void);
+
+int pm_pwronoff;
+/*Angelia Additions */
+int pm_pedr=0;
+EXPORT_SYMBOL(pm_pwronoff);
+EXPORT_SYMBOL(pm_pedr);
+
 
 #define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
 #define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
 
-#define RESTORE_GPLEVEL(n) do { \
-	GPSR##n = sleep_save[SLEEP_SAVE_GPLR##n]; \
-	GPCR##n = ~sleep_save[SLEEP_SAVE_GPLR##n]; \
-} while (0)
-
 /*
  * List of global PXA peripheral registers to preserve.
  * More ones like CP and general purpose register values are preserved
@@ -46,97 +61,405 @@
  */
 enum {	SLEEP_SAVE_START = 0,
 
-	SLEEP_SAVE_GPLR0, SLEEP_SAVE_GPLR1, SLEEP_SAVE_GPLR2, SLEEP_SAVE_GPLR3,
-	SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2, SLEEP_SAVE_GPDR3,
-	SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2, SLEEP_SAVE_GRER3,
-	SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2, SLEEP_SAVE_GFER3,
-	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
-
-	SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
-	SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
-	SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U,
-	SLEEP_SAVE_GAFR3_L, SLEEP_SAVE_GAFR3_U,
+	SLEEP_SAVE_OSCR, SLEEP_SAVE_OIER,
+	SLEEP_SAVE_OSMR0, SLEEP_SAVE_OSMR1, SLEEP_SAVE_OSMR2, SLEEP_SAVE_OSMR3,
 
-	SLEEP_SAVE_PSTR,
+	SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2,
+	SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2,
+	SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2,
+	SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR2_L,
+	SLEEP_SAVE_GAFR0_U, SLEEP_SAVE_GAFR1_U, SLEEP_SAVE_GAFR2_U,
+
+	SLEEP_SAVE_FFIER, SLEEP_SAVE_FFLCR, SLEEP_SAVE_FFMCR,
+	SLEEP_SAVE_FFSPR, SLEEP_SAVE_FFISR,
+	SLEEP_SAVE_FFDLL, SLEEP_SAVE_FFDLH,SLEEP_SAVE_FFFCR,
+
+	SLEEP_SAVE_STIER, SLEEP_SAVE_STLCR, SLEEP_SAVE_STMCR,
+	SLEEP_SAVE_STSPR, SLEEP_SAVE_STISR,
+	SLEEP_SAVE_STDLL, SLEEP_SAVE_STDLH,
+
+	SLEEP_SAVE_BTIER, SLEEP_SAVE_BTLCR, SLEEP_SAVE_BTMCR,
+	SLEEP_SAVE_BTSPR, SLEEP_SAVE_BTISR,
+	SLEEP_SAVE_BTDLL, SLEEP_SAVE_BTDLH,
 
 	SLEEP_SAVE_ICMR,
 	SLEEP_SAVE_CKEN,
 
-#ifdef CONFIG_PXA27x
- 	SLEEP_SAVE_MDREFR,
- 	SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
- 	SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,
-#endif
+	SLEEP_SAVE_LCCR0, SLEEP_SAVE_LCCR1, SLEEP_SAVE_LCCR2,SLEEP_SAVE_LCCR3,
+	SLEEP_SAVE_TMEDCR, SLEEP_SAVE_FDADR0, SLEEP_SAVE_FSADR0,SLEEP_SAVE_FIDR0,SLEEP_SAVE_FDADR1,
+	SLEEP_SAVE_LDCMD0,
+
+	SLEEP_SAVE_NSSCR0,SLEEP_SAVE_NSSCR1,SLEEP_SAVE_NSSSR,SLEEP_SAVE_NSSITR,SLEEP_SAVE_NSSDR,
+	SLEEP_SAVE_NSSTO,SLEEP_SAVE_NSSPSP,
 
-	SLEEP_SAVE_CKSUM,
 
+	SLEEP_SAVE_CKSUM,
 	SLEEP_SAVE_SIZE
 };
 
+/**/
+#define UART_DTR	1
+#define UART_RTS	2
+
+/**/
 
-int pxa_pm_enter(suspend_state_t state)
+int pm_do_suspend(void)
 {
 	unsigned long sleep_save[SLEEP_SAVE_SIZE];
 	unsigned long checksum = 0;
-	struct timespec delta, rtc;
 	int i;
+	int valbefore,valafter,valafter1;
+	int gpsr0,gpsr1,gpsr2;
 	extern void pxa_cpu_pm_enter(suspend_state_t state);
 
-#ifdef CONFIG_IWMMXT
-	/* force any iWMMXt context to ram **/
-	iwmmxt_task_disable(NULL);
-#endif
+	// YoKu 16Feb06 GPIO Changed ----->
+
+	PGSR2 |= GPIO_bit(78);
+/*	if(GPLR2 & GPIO_bit(78))		// LCD Reset Pin
+		PGSR2 |= GPIO_bit(78);
+	else
+		PGSR2 &= ~GPIO_bit(78); 	*/
+	GPDR0 &= ~GPIO_bit(0);
+	GPDR0 &= ~GPIO_bit(1);
+	GPDR0 &= ~GPIO_bit(3); //Tushar: 20 apr GPIO3 configured as input
+	GPDR0 &= ~GPIO_bit(2);
+//	GPDR0 &= ~GPIO_bit(5);
+//	GPDR0 &= ~GPIO_bit(6);
+//	GPDR0 &= ~GPIO_bit(7);
+//	GPDR0 &= ~GPIO_bit(8);	
+
+
+// KeyCol pin Status in sleep mode
+	PGSR0 &= ~GPIO_bit(9);         //19
+        PGSR0 &= ~GPIO_bit(10);        //20
+        PGSR0 &= ~GPIO_bit(11);        //21
+        PGSR0 &= ~GPIO_bit(12);        //22
+        PGSR0 &= ~GPIO_bit(13);        //23
+        PGSR0 &= ~GPIO_bit(14);        //24
+
+	printk("KER_PM: Setting up wakeup sources 26May06\n");
+
+	// KeyPad
+	//printk("KER_PM: Uncommented key pad wakeup sources\n");
+	PWER |= GPIO_bit(5);		//11
+	PWER |= GPIO_bit(6);		//12
+	PWER |= GPIO_bit(7);		//13
+	PWER |= GPIO_bit(8);		//14
+	PFER |= GPIO_bit(5);		//11
+	PFER |= GPIO_bit(6);		//12
+	PFER |= GPIO_bit(7);		//13
+	PFER |= GPIO_bit(8);		//14
+	PRER |= GPIO_bit(5);		//11
+	PRER |= GPIO_bit(6);		//12
+	PRER |= GPIO_bit(7);		//13
+	PRER |= GPIO_bit(8);		//14		
+
+	// USB
+	PWER |= GPIO_bit(3);		//6
+	PFER |= GPIO_bit(3);		//6
+	PRER |= GPIO_bit(3);		//6
+
+	// PMU
+	PWER |= GPIO_bit(2);		//4
+	PFER |= GPIO_bit(2);		//4
+	PRER |= GPIO_bit(2);		//4
+
+	// Anup : GSM RI
+        PWER |= GPIO_bit(0);		//0
+        PFER |= GPIO_bit(0);		//0
+        PRER |= GPIO_bit(0);		//0
+	// anup prashant : for gsm reset problem 19 may 2006
+	//GPDR0 |= GPIO_bit(18); 	YoKu Commented this line, GPIO18 should be i/p pin to avoid GSM Reset pulse	
+	PGSR0 |= GPIO_bit(18);		// GSM reset pin
+	PGSR0 |= GPIO_bit(0);		//
+	PGSR1 |= GPIO_bit(38);		// commneted .18 apr
+	//  <----- YoKu
+
+	// YoKu ----->
+	// When exiting from sleep mode, 10us Low pulse comes on GSM Reset and Pwr pin
+	// to avoid this configure GPIO 18,80 as input pins before going to sleep mode
+        GPDR0 &= ~GPIO_bit(18);
+        //GPDR2 &= ~GPIO_bit(80);
+        // <----- YoKu
+
+	//kirti for RTC
+        PWER |= PWER_RTC;
+	//kirti	cli();
+	local_irq_disable();
+	//kirti	clf();
+	local_fiq_disable();
+	leds_event(led_stop);
+
+	/* Put Current time into RCNR */
+	RCNR = xtime.tv_sec;
 
-	/* preserve current time */
-	rtc.tv_sec = RCNR;
-	rtc.tv_nsec = 0;
-	save_time_delta(&delta, &rtc);
+	printk("11May2006 KERR: pgsr0=0x%08x pgsr1=0x%08x pgsr2= 0x%08x\n",PGSR0,PGSR1,PGSR2);
+	printk("KER_PM_DELAY: SSCR Going to Sleep at RCNR =%d\n\n\n\n\n\n",RCNR);
+
+	/* 
+	 * Temporary solution.  This won't be necessary once
+	 * we move pxa support into the serial driver
+	 * Save the FF UART 
+	 */
+
+	// Anup : commented for power saving mode problem
+	printk("\nPM: Why doesnt it prnt?? 26May06\n");
+	printk("\nPM : GSM Sleep Mode enabled");
+
+
+	FFMCR &= ~UART_RTS;
+	udelay(2000);
+	udelay(2000);
+	FFMCR &= ~UART_DTR ;
+	udelay(2000);
+	
+	udelay(2000);
+	// rupali
+	// Anup : Do not check here
+/*	if(!pm_pwronoff)
+	{
+		printk("\nPM : Modem Control Register = %x " , FFMCR);
+		while( FFMSR & 0x00000020)
+		{
+			printk("\nPM : FFFSR = %x " , FFMSR);
+		}
+	}		*/
+	udelay(2000);
+							
+//Tushar: 19 apr
+//	NSSCR0 &= 0xFFFFFF7F;
+//	printk("\nPM: NSSCR0 = %x" ,NSSCR0 );
+
+	SAVE(FFIER);
+	SAVE(FFLCR);
+	SAVE(FFMCR);
+	SAVE(FFSPR);
+	SAVE(FFISR);
+	FFLCR |= 0x80;
+	SAVE(FFDLL);
+	SAVE(FFDLH);
+	SAVE(FFFCR);
+	FFLCR &= 0xef;
+
+	SAVE(STIER);
+	SAVE(STLCR);
+	SAVE(STMCR);
+	SAVE(STSPR);
+	SAVE(STISR);
+	STLCR |= 0x80;
+	SAVE(STDLL);
+	SAVE(STDLH);
+	STLCR &= 0xef;
+
+	SAVE(BTIER);
+	SAVE(BTLCR);
+	SAVE(BTMCR);
+	SAVE(BTSPR);
+	SAVE(BTISR);
+	BTLCR |= 0x80;
+	SAVE(BTDLL);
+	SAVE(BTDLH);
+	BTLCR &= 0xef;
+
+	/* save vital registers */
+	SAVE(OSCR);
+	SAVE(OSMR0);
+	SAVE(OSMR1);
+	SAVE(OSMR2);
+	SAVE(OSMR3);
+	SAVE(OIER);
 
-	SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2);
 	SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2);
 	SAVE(GRER0); SAVE(GRER1); SAVE(GRER2);
 	SAVE(GFER0); SAVE(GFER1); SAVE(GFER2);
-	SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2);
-
 	SAVE(GAFR0_L); SAVE(GAFR0_U);
 	SAVE(GAFR1_L); SAVE(GAFR1_U);
 	SAVE(GAFR2_L); SAVE(GAFR2_U);
 
-#ifdef CONFIG_PXA27x
-	SAVE(MDREFR);
-	SAVE(GPLR3); SAVE(GPDR3); SAVE(GRER3); SAVE(GFER3); SAVE(PGSR3);
-	SAVE(GAFR3_L); SAVE(GAFR3_U);
-	SAVE(PWER); SAVE(PCFR); SAVE(PRER);
-	SAVE(PFER); SAVE(PKWR);
-#endif
+	// YoKu 23Feb06 Added To save LCD Registers, updated by kirti 24Feb06 ----->
+	SAVE(LCCR0); SAVE(LCCR1); SAVE(LCCR2); SAVE(LCCR3);
+	SAVE(FDADR0); 
+	SAVE(FDADR1); 
+	LCSR = 0xffffffff;	/* Clear LCD Status Register */
+	
+//	LCCR0 &= ~LCCR0_LDM;	/* Enable LCD Disable Done Interrupt */
+//	LCCR0 |= LCCR0_DIS;	/* Disable LCD Controller */
+
+	SAVE(LDCMD0);		
+	// <----- YoKu
+
+//	LCCR0 &= ~LCCR0_LDM;    /* Enable LCD Disable Done Interrupt */
+//      LCCR0 |= LCCR0_DIS;     /* Disable LCD Controller */
+
 
 	SAVE(ICMR);
 	ICMR = 0;
 
 	SAVE(CKEN);
-	SAVE(PSTR);
+	CKEN = 0;
+
+	// Anup : For Wifi power saving mode 2 May 2006
+        SAVE(NSSCR0);SAVE(NSSCR1);SAVE(NSSSR);SAVE(NSSITR);SAVE(NSSDR);SAVE(NSSTO);
+        SAVE(NSSPSP);
+        printk("\nMY favourite mode in life.......sleep.....\n");
+
 
 	/* Note: wake up source are set up in each machine specific files */
 
+	/*Changes to keep the right sim selected */
+	gpsr0 = GPLR0;
+	gpsr1 = GPLR1;
+	gpsr2 = GPLR2;
+
+	/*Sim 1 selected */
+	// YoKu GPIOs Changed ----->
+	if( (GPLR0 & GPIO_bit(21)) && !(GPLR0 & GPIO_bit(22)) ) // 62,63
+	{
+		PGSR0 |= GPIO_bit(21) ;		//62
+		PGSR0 &= ~GPIO_bit(22) ;	//63	
+	}
+	else if (!(GPLR0 & GPIO_bit(21)) && (GPLR0 & GPIO_bit(22)) ) // 62,63
+	{
+		PGSR0 |= GPIO_bit(22) ;		//63
+		PGSR0 &= ~GPIO_bit(21) ; 	//62
+	} /* sim 2*/
+	// <----- YoKu
+
 	/* clear GPIO transition detect  bits */
 	GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2;
-#ifdef CONFIG_PXA27x
-	GEDR3 = GEDR3;
-#endif
 
 	/* Clear sleep reset status */
 	RCSR = RCSR_SMR;
 
+	/* set resume return address */
+	PSPR = virt_to_phys(pxa_cpu_resume);
+
 	/* before sleeping, calculate and save a checksum */
 	for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
 		checksum += sleep_save[i];
 	sleep_save[SLEEP_SAVE_CKSUM] = checksum;
 
-	/* *** go zzz *** */
-	pxa_cpu_pm_enter(state);
+	 PGSR0 |= GPIO_bit(15);   //sidd for wake from Sleep 15, YoKu Comented ?? GPIO15 was ChipSelect
+	PGSR2 |= GPIO_bit(80);   //sidd for GSM Engine 69, YoKu GPIO Changed	Anup :commented
+
+	PGSR1 &= ~GPIO_bit(33); //Tushar: BT Codec Power Down
+
+	PGSR0 &= ~GPIO_bit(23); //Tushar: BGW200 Regulator OFF	
+
+//	GPDR1 |= GPIO_bit(49); //Tushar: LCD Serial Data in changed to O/P
+
+//	PGSR1 &= ~GPIO_bit(48);//Tushar: LCD Serial Pins
+
+//	PGSR1 &= ~GPIO_bit(49);
+
+//	PGSR1 &= ~GPIO_bit(50);
+
+//	PGSR1 |= GPIO_bit(51);
+
+//	PGSR1 &= 0x03FFFFFF;//Tushar: 24apr LCD datalines
+//	PGSR2 &= 0xFFFFFC00;
+
+	PGSR0 &= ~GPIO_bit(24); //Tushar: Mux Control Signals
+
+	PGSR0 &= ~GPIO_bit(25);
+
+	PGSR0 &= ~GPIO_bit(26);
+
+	PGSR0 &= ~GPIO_bit(27);
+
+ //       GPDR0 |= GPIO_bit(17); //Tushar: unused GPIOs 19apr
+   //     GPCR0 |= GPIO_bit(17);
+        PGSR0 &= ~GPIO_bit(17);
+
+//	GPDR1 |= GPIO_bit(56); //Tushar: unused GPIOs 19apr
+  //      GPCR1 |= GPIO_bit(56);
+        PGSR1 &= ~GPIO_bit(56);
+
+//	GPDR2 |= GPIO_bit(79);//Tushar: unused GPIOs 19apr
+//	GPCR2 |= GPIO_bit(79);
+	PGSR2 &= ~GPIO_bit(79);
+
+//	GPDR1 |= 0x03F00000;//Tushar: unused GPIOs 19apr
+//	GPCR1 |= 0x03F00000;
+	PGSR1 &= 0xFC0FFFFF; 
+
+
+	GPDR0 |= GPIO_bit(19);//Tushar: SIM Present Inputs configured as outputs
+	GPDR0 |= GPIO_bit(20);
+	PGSR0 &= ~GPIO_bit(19);
+	PGSR0 &= ~GPIO_bit(20);
+
+	
+//Tushar: 25apr FFRTS FFDTR & FFTXD 
+
+	PGSR1 |= GPIO_bit(39);
+	PGSR1 |= GPIO_bit(40);
+	PGSR1 |= GPIO_bit(41);
+/*
+	PGSR2 &= GPIO_bit(81); //Tushar: 24apr NSSP pins
+	PGSR2 &= GPIO_bit(82);
+	PGSR2 &= GPIO_bit(83);
+
+	PGSR2 |= GPIO_bit(74);
+ 	PGSR2 |= GPIO_bit(75);
+ 	PGSR2 |= GPIO_bit(76);
+ 	PGSR2 |= GPIO_bit(77);
+*/
+	if(pm_pwronoff)
+	{
+		/* We are here bcos of pressing of on off switch
+		   We wake up now only on pwr switch */
+		printk("Anup: Before sleeping \n");	
+		pm_pwronoff = 0;
+		PGSR0 &= ~GPIO_bit(23);		//7  YoKu GPIO Changed
+		//PGSR2 &= ~GPIO_bit(64);	//64 YoKu Commented in PWG500 64,7 was WifiReg, IN PWG600 it is 23
+
+		PGSR2 &= ~GPIO_bit(80);		//69 YoKu GPIO Changed	Anup : commnented
+		PWER = 0x0004;			// YoKu Changed from 0x10 to 0x04 (i.e GPIO 4 -> 2)
+		PFER = 0x0004;
+		PRER = 0x0004;
+
+// YoKu ---->
+// 11May2006 To reduce Power Off current from 7mA to 4mA
+		GPDR0 |= GPIO_bit(16);  // BTReset o/p Low
+        	PGSR0 &= ~GPIO_bit(16);
+
+		GPDR1 |= GPIO_bit(33);  // nMEC/nPDI o/p Low
+                PGSR1 &= ~GPIO_bit(33);
+
+		GPDR1 |= GPIO_bit(45);  // BTRTS o/p High
+                PGSR1 |= GPIO_bit(45);
+
+		
+		GPDR1 |= GPIO_bit(43);  // BTTXD o/p High
+                PGSR1 |= GPIO_bit(43);
+		
+		GPDR1 &= ~GPIO_bit(42);	// BTRXD i/p
+		GPDR1 &= ~GPIO_bit(44);	// BTCTS i/p
+// <---- YoKu
+
+		PSPR = virt_to_phys(pxa_cpu_resume);	// YoKu 29July05 to Resume from where u left, Original PSPR = 0
+	}
+
+	valbefore = GPLR0 & (GPIO_bit(21) | GPIO_bit(22)) ; // 62,63 YoKu GPIO Changed
+
+	//printk("Anup: Before sleeping gpsr0=0x%08x gpsr1=0x%08x gpsr2= 0x%08x\n",gpsr0,gpsr1,gpsr2);	
+	//kirti	pxa_cpu_suspend();
+	//printk("KER_PM: Going to sleep zzzzzzzzz\n");
+	
+//	OSCC |= OSCC_OON; //Tushar: 18 apr. enable 32.768KHz Oscillator
+
+//	PCFR |= PCFR_OPDE; //Tushar: 18 apr. disable 3.6864MHz oscillator	
+
+	pxa_cpu_pm_enter(PM_SUSPEND_MEM);
 
 	cpu_init();
 
+	//kirti~
+	/**/
+	//FFMCR |=  UART_DTR ;
+	/**/
+
 	/* after sleeping, validate the checksum */
 	checksum = 0;
 	for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
@@ -141,39 +464,63 @@
 	checksum = 0;
 	for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
 		checksum += sleep_save[i];
-
 	/* if invalid, display message and wait for a hardware reset */
-	if (checksum != sleep_save[SLEEP_SAVE_CKSUM]) {
+	if (checksum != sleep_save[SLEEP_SAVE_CKSUM]) 
+	{
 #ifdef CONFIG_ARCH_LUBBOCK
 		LUB_HEXLED = 0xbadbadc5;
 #endif
 		while (1)
-			pxa_cpu_pm_enter(state);
+		{
+			printk("\n\n\nKERN_PM: CRC Error!!! after wakeup\n\n\n"); // YoKu 25May06
+
 	}
 
+	}
+	valafter = GPLR0 & (GPIO_bit(21) | GPIO_bit(22)) ;	//62,63 YoKu GPIO Changed
+	pm_pedr = PEDR ;
+ 
 	/* ensure not to come back here if it wasn't intended */
 	PSPR = 0;
 
+	/*printk("YoKu: gafr0_L=0x%08x gafr0_U=0x%08x\n",GAFR0_L,GAFR0_U); 
+	printk(" gafr1_L= 0x%08x gafr1_U= 0x%08x\n",GAFR1_L,GAFR1_U);	
+	printk(" gafr2_L= 0x%08x gafr2_U= 0x%08x\n",GAFR2_L,GAFR2_U);	*/
 	/* restore registers */
-	RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2);
 	RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2);
+	RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2);
+	RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2);
 	RESTORE(GAFR0_L); RESTORE(GAFR0_U);
 	RESTORE(GAFR1_L); RESTORE(GAFR1_U);
 	RESTORE(GAFR2_L); RESTORE(GAFR2_U);
-	RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2);
-	RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2);
-	RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
 
-#ifdef CONFIG_PXA27x
-	RESTORE(MDREFR);
-	RESTORE_GPLEVEL(3); RESTORE(GPDR3);
-	RESTORE(GAFR3_L); RESTORE(GAFR3_U);
-	RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3);
-	RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER);
-	RESTORE(PFER); RESTORE(PKWR);
-#endif
 
-	PSSR = PSSR_RDH | PSSR_PH;
+	// Anup : For Wifi power saving mode 2 May 2006
+        RESTORE(NSSCR0);RESTORE(NSSCR1);RESTORE(NSSSR);RESTORE(NSSITR);RESTORE(NSSDR);RESTORE(NSSTO);
+        RESTORE(NSSPSP);
+
+	// PSSR = PSSR_PH;
+	GPSR0 = gpsr0;
+	GPSR1 = gpsr1;
+	GPSR2 = gpsr2;
+	
+	// Anup : check values of these registers
+//	 printk("YoKu: gpsr0=0x%08x gpsr1=0x%08x gpsr2= 0x%08x\n",gpsr0,gpsr1,gpsr2);	
+	//sidd
+
+	GPCR0 |= ~gpsr0;
+	GPCR1 |= ~gpsr1;
+	GPCR2 |= ~gpsr2;
+
+	
+	PSSR = ~PSSR_PH;
+
+	RESTORE(OSMR0);
+	RESTORE(OSMR1);
+	RESTORE(OSMR2);
+	RESTORE(OSMR3);
+	RESTORE(OSCR);
+	RESTORE(OIER);
 
 	RESTORE(CKEN);
 
@@ -181,62 +528,181 @@
 	ICCR = 1;
 	RESTORE(ICMR);
 
-	RESTORE(PSTR);
+	/* 
+	 * Temporary solution.  This won't be necessary once
+	 * we move pxa support into the serial driver.
+	 * Restore the FF UART.
+	 */
+	RESTORE(BTMCR);
+	RESTORE(BTSPR);
+	RESTORE(BTLCR);
+	BTLCR |= 0x80;
+	RESTORE(BTDLH);
+	RESTORE(BTDLL);
+	RESTORE(BTLCR);
+	RESTORE(BTISR);
+	BTFCR = 0xc7;
+	RESTORE(BTIER);
+
+	RESTORE(STMCR);
+	RESTORE(STSPR);
+	RESTORE(STLCR);
+	STLCR |= 0x80;
+	RESTORE(STDLH);
+	RESTORE(STDLL);
+	RESTORE(STLCR);
+	RESTORE(STISR);
+	STFCR = 0xc7;
+	RESTORE(STIER);
+
+	RESTORE(FFMCR);
+	RESTORE(FFSPR);
+	RESTORE(FFLCR);
+	FFLCR |= 0x80;
+	RESTORE(FFDLH);
+	RESTORE(FFDLL);
+	RESTORE(FFLCR);
+	RESTORE(FFISR);
+	RESTORE(FFFCR);
+	FFFCR = 0xc7;
+	RESTORE(FFIER);
+
+	 // YoKu 23Feb06 Added To save LCD Registers, updated by kirti 24Feb06 ----->
+        RESTORE(LCCR3); RESTORE(LCCR2); RESTORE(LCCR1); 
+	LCCR0=RESTORE(LCCR0) & ~LCCR0_ENB;
+        RESTORE(FDADR0); RESTORE(FDADR1);
+	LCCR0 |= LCCR0_ENB;
+	
+        // <----- YoKu
 
 	/* restore current time */
-	rtc.tv_sec = RCNR;
-	restore_time_delta(&delta, &rtc);
+	xtime.tv_sec = RCNR;
+
+	valafter1 = GPLR0 & (GPIO_bit(21) | GPIO_bit(22)) ;	//62,63 YoKu GPIO Changed
+
+//	SSCR0 &=0xFFFFFFFF;
+//	printk("\nPM : val of SSCR0 = %x " , SSCR0);
+
+	printk("KER_PM: Resumed at RCNR = %d RTSR= %x\n",RCNR,RTSR);
+
+	printk("YoKu: pgsr0=0x%08x pgsr1=0x%08x pgsr2= 0x%08x\n",PGSR0,PGSR1,PGSR2);
+
+	OSMR0 = 0;		/* set initial match at 0 */
+	OSSR = 0xf;		/* clear status on all timers */
+	OIER |= OIER_E0;	/* enable match on timer 0 to cause interrupts */
+	OSCR = 0;		/* initialize free-running timer, force first match */
+
+	leds_event(led_start);
+	//kirti	sti();
+	// call i2c reset here---->
+	ICR = ICR_UR;
+	ISR = 0x7FF; //I2C_ISR_INIT;
+	ICR &= ~ICR_UR;
+
+	ISAR = 0x32;//i2c->slave_addr;
+
+	/* set control register values */
+	ICR = (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE);//I2C_ICR_INIT;
+
+	/* enable unit */
+	ICR |= ICR_IUE;
+	udelay(100);
+	//<-----
+
+	local_irq_enable();
 
-#ifdef DEBUG
-	printk(KERN_DEBUG "*** made it back from resume\n");
-#endif
 
 	return 0;
 }
 
-EXPORT_SYMBOL_GPL(pxa_pm_enter);
-
 unsigned long sleep_phys_sp(void *sp)
 {
 	return virt_to_phys(sp);
 }
 
+#ifdef CONFIG_SYSCTL
 /*
- * Called after processes are frozen, but before we shut down devices.
+ * ARGH!  ACPI people defined CTL_ACPI in linux/acpi.h rather than
+ * linux/sysctl.h.
+ *
+ * This means our interface here won't survive long - it needs a new
+ * interface.  Quick hack to get this working - use sysctl id 9999.
  */
-int pxa_pm_prepare(suspend_state_t state)
-{
-	extern int pxa_cpu_pm_prepare(suspend_state_t state);
+#warning ACPI broke the kernel, this interface needs to be fixed up.
+#define CTL_ACPI 9999
+#define ACPI_S1_SLP_TYP 19
 
-	return pxa_cpu_pm_prepare(state);
+/*
+ * Send us to sleep.
+ */
+static int sysctl_pm_do_suspend(ctl_table *ctl, int write, struct file *filp,
+		void *buffer, size_t *lenp)
+{
+	int retval=0;
+	unsigned i , clock ;  
+	if (write) 
+	{
+		char buf[16], *p;
+		unsigned int sleepsec;
+		int len,left = *lenp;
+
+		len = left;
+		if (left > sizeof(buf))
+			left = sizeof(buf);
+		if (!copy_from_user(buf, buffer, left))
+		{
+			buf[sizeof(buf) - 1] = '\0';
+			sleepsec = simple_strtoul(buf, &p, 0);
+			printk("\nSleeping %d Pwronoff=%x RCNR=%d\n",sleepsec,pm_pwronoff,RCNR);
+			printk("\nPWER %x PFER=%x PRER=%x\n",PWER,PFER,PRER);
+			RTAR = xtime.tv_sec + sleepsec;
+			printk("\nRTAR=%d \n",RTAR);
+		}
+	}
+	retval = pm_do_suspend();
+	clock = get_memclk_frequency_10khz();
+	return retval;
 }
-
-EXPORT_SYMBOL_GPL(pxa_pm_prepare);
 
 /*
- * Called after devices are re-setup, but before processes are thawed.
+static struct ctl_table pm_table[] =
+{
+	{ACPI_S1_SLP_TYP, "suspend", NULL, 0, 0600, NULL, (proc_handler *)&sysctl_pm_do_suspend},
+	{0}
+};
  */
-int pxa_pm_finish(suspend_state_t state)
+static struct ctl_table pm_table[] =
 {
-	return 0;
+	{ 
+	ctl_name:	ACPI_S1_SLP_TYP, 
+	procname: 	"suspend", 
+	mode: 		0600, 
+	proc_handler:	(proc_handler *)&sysctl_pm_do_suspend,
+	},
+	{
+	ctl_name: 0
 }
+};
 
-EXPORT_SYMBOL_GPL(pxa_pm_finish);
+static struct ctl_table pm_dir_table[] =
+{
+	{CTL_ACPI, "pm", NULL, 0, 0555, pm_table},
+	{0}
+};
 
 /*
- * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
+ * Initialize power interface
  */
-static struct pm_ops pxa_pm_ops = {
-	.pm_disk_mode	= PM_DISK_FIRMWARE,
-	.prepare	= pxa_pm_prepare,
-	.enter		= pxa_pm_enter,
-	.finish		= pxa_pm_finish,
-};
-
-static int __init pxa_pm_init(void)
+static int __init pm_init(void)
 {
-	pm_set_ops(&pxa_pm_ops);
+	register_sysctl_table(pm_dir_table, 1);
+        /*Adi: Adjust for clock value to RTC
+        RTTR = RTC clk - 1*/
+        RTTR = 32913;
+
 	return 0;
 }
 
-device_initcall(pxa_pm_init);
+__initcall(pm_init);
+
+#endif
diff -NurbwB linux-2.6.17/arch/arm/mach-pxa/sleep.S linux-2.6.17-patched/arch/arm/mach-pxa/sleep.S
--- linux-2.6.17/arch/arm/mach-pxa/sleep.S	2006-06-17 18:49:35.000000000 -0700
+++ linux-2.6.17-patched/arch/arm/mach-pxa/sleep.S	2006-09-11 13:07:05.000000000 -0700
@@ -79,7 +79,7 @@
 	ldr	r5, [r4]
 
 	@ enable SDRAM self-refresh mode
-	orr	r5, r5, #MDREFR_SLFRSH
+	orr	r5, r5, #(MDREFR_SLFRSH | MDREFR_APD)
 
 #ifdef CONFIG_PXA27x
 	@ set SDCLKx divide-by-2 bits (this is part of a workaround for Errata 50)
diff -NurbwB linux-2.6.17/include/asm-arm/arch-pxa/pxa-regs.h linux-2.6.17-patched/include/asm-arm/arch-pxa/pxa-regs.h
--- linux-2.6.17/include/asm-arm/arch-pxa/pxa-regs.h	2006-06-17 18:49:35.000000000 -0700
+++ linux-2.6.17-patched/include/asm-arm/arch-pxa/pxa-regs.h	2006-09-11 11:04:36.000000000 -0700
@@ -1748,6 +1748,15 @@
 #define SSTO_P(x) (*(((x) == 1) ? &SSTO_P1 : ((x) == 2) ? &SSTO_P2 : ((x) == 3) ? &SSTO_P3 : NULL))
 #define SSPSP_P(x) (*(((x) == 1) ? &SSPSP_P1 : ((x) == 2) ? &SSPSP_P2 : ((x) == 3) ? &SSPSP_P3 : NULL))
 
+#define NSSCR0          __REG(0x41400000)  /* SSP Port 1 Control Register 0 */
+#define NSSCR1          __REG(0x41400004)  /* SSP Port 1 Control Register 1 */
+#define NSSSR           __REG(0x41400008)  /* SSP Port 1 Status Register */
+#define NSSITR          __REG(0x4140000C)  /* SSP Port 1 Interrupt Test Register */
+#define NSSDR           __REG(0x41400010)  /* (Write / Read) SSP Port 1 Data Write Register/SSP Data Read Register */
+#define NSSTO           __REG(0x41400028)  /* SSP Port 1 Time Out Register */
+#define NSSPSP          __REG(0x4140002C)  /* SSP Port 1 Programmable Serial Port Register */
+
+
 /*
  * MultiMediaCard (MMC) controller
  */
diff -NurbwB linux-2.6.17/kernel/power/main.c linux-2.6.17-patched/kernel/power/main.c
--- linux-2.6.17/kernel/power/main.c	2006-06-17 18:49:35.000000000 -0700
+++ linux-2.6.17-patched/kernel/power/main.c	2006-09-11 12:59:20.000000000 -0700
@@ -66,10 +66,12 @@
 		goto Enable_cpu;
 	}
 
+	/*
 	if (freeze_processes()) {
 		error = -EAGAIN;
 		goto Thaw;
 	}
+	*/
 
 	if ((free_pages = nr_free_pages()) < FREE_PAGE_NUMBER) {
 		pr_debug("PM: free some memory\n");
@@ -110,12 +112,15 @@
 
 	local_irq_save(flags);
 
+	/*
 	if ((error = device_power_down(PMSG_SUSPEND))) {
 		printk(KERN_ERR "Some devices failed to power down\n");
 		goto Done;
 	}
+	*/
+
 	error = pm_ops->enter(state);
-	device_power_up();
+	//device_power_up();
  Done:
 	local_irq_restore(flags);
 	return error;