path: root/target/linux/ixp4xx/patches-2.6.24/190-cambria_support.patch

diff -Nur linux-2.6.24.5/arch/arm/mach-ixp4xx/Kconfig linux-2.6.24.5-owrt/arch/arm/mach-ixp4xx/Kconfig
--- linux-2.6.24.5/arch/arm/mach-ixp4xx/Kconfig	2008-04-28 20:22:27.000000000 +0200
+++ linux-2.6.24.5-owrt/arch/arm/mach-ixp4xx/Kconfig	2008-04-28 20:26:44.000000000 +0200
@@ -25,6 +25,14 @@
 	  Avila Network Platform. For more information on this platform,
 	  see <file:Documentation/arm/IXP4xx>.
 
+config MACH_CAMBRIA
+	bool "Cambria"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support the Gateworks
+	  Cambria series. For more information on this platform,
+	  see <file:Documentation/arm/IXP4xx>.
+
 config MACH_LOFT
     bool "Loft"
     depends on MACH_AVILA
@@ -200,7 +208,7 @@
 
 config CPU_IXP43X
 	bool
-	depends on MACH_KIXRP435
+	depends on MACH_KIXRP435 || MACH_CAMBRIA
 	default y
 
 config MACH_GTWX5715
diff -Nur linux-2.6.24.5/arch/arm/mach-ixp4xx/Makefile linux-2.6.24.5-owrt/arch/arm/mach-ixp4xx/Makefile
--- linux-2.6.24.5/arch/arm/mach-ixp4xx/Makefile	2008-04-28 20:22:27.000000000 +0200
+++ linux-2.6.24.5-owrt/arch/arm/mach-ixp4xx/Makefile	2008-04-28 20:26:44.000000000 +0200
@@ -7,6 +7,7 @@
 
 obj-pci-$(CONFIG_ARCH_IXDP4XX)		+= ixdp425-pci.o
 obj-pci-$(CONFIG_MACH_AVILA)		+= avila-pci.o
+obj-pci-$(CONFIG_MACH_CAMBRIA)		+= cambria-pci.o
 obj-pci-$(CONFIG_MACH_IXDPG425)		+= ixdpg425-pci.o
 obj-pci-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o
 obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx5715-pci.o
@@ -28,6 +29,7 @@
 
 obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-setup.o
 obj-$(CONFIG_MACH_AVILA)	+= avila-setup.o
+obj-$(CONFIG_MACH_CAMBRIA)	+= cambria-setup.o
 obj-$(CONFIG_MACH_IXDPG425)	+= coyote-setup.o
 obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o
 obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-setup.o
diff -Nur linux-2.6.24.5/arch/arm/mach-ixp4xx/cambria-pci.c linux-2.6.24.5-owrt/arch/arm/mach-ixp4xx/cambria-pci.c
--- linux-2.6.24.5/arch/arm/mach-ixp4xx/cambria-pci.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.24.5-owrt/arch/arm/mach-ixp4xx/cambria-pci.c	2008-04-28 20:30:35.000000000 +0200
@@ -0,0 +1,74 @@
+/*
+ * arch/arch/mach-ixp4xx/cambria-pci.c
+ *
+ * PCI setup routines for Gateworks Cambria series
+ *
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-pci.c:
+ *	Copyright (C) 2002 Jungo Software Technologies.
+ *	Copyright (C) 2003 MontaVista Softwrae, Inc.
+ *
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/pci.h>
+
+extern void ixp4xx_pci_preinit(void);
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+
+void __init cambria_pci_preinit(void)
+{
+	set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init cambria_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (slot == 1)
+		return IRQ_IXP4XX_GPIO11;
+	else if (slot == 2)
+		return IRQ_IXP4XX_GPIO10;
+	else if (slot == 3)
+		return IRQ_IXP4XX_GPIO9;
+	else if (slot == 4)
+		return IRQ_IXP4XX_GPIO8;
+	else return -1;
+}
+
+struct hw_pci cambria_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit =        cambria_pci_preinit,
+	.swizzle =        pci_std_swizzle,
+	.setup =          ixp4xx_setup,
+	.scan =           ixp4xx_scan_bus,
+	.map_irq =        cambria_map_irq,
+};
+
+int __init cambria_pci_init(void)
+{
+	if (machine_is_cambria())
+		pci_common_init(&cambria_pci);
+	return 0;
+}
+
+subsys_initcall(cambria_pci_init);
diff -Nur linux-2.6.24.5/arch/arm/mach-ixp4xx/cambria-setup.c linux-2.6.24.5-owrt/arch/arm/mach-ixp4xx/cambria-setup.c
--- linux-2.6.24.5/arch/arm/mach-ixp4xx/cambria-setup.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.24.5-owrt/arch/arm/mach-ixp4xx/cambria-setup.c	2008-04-28 21:07:16.000000000 +0200
@@ -0,0 +1,280 @@
+/*
+ * arch/arm/mach-ixp4xx/cambria-setup.c
+ *
+ * Board setup for the Gateworks Cambria series
+ *
+ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
+ *
+ * based on coyote-setup.c:
+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/if_ether.h>
+#include <linux/socket.h>
+#include <linux/netdevice.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+#ifdef CONFIG_SENSORS_EEPROM
+# include <linux/i2c.h>
+# include <linux/eeprom.h>
+#endif
+                                                                                
+#include <linux/i2c-gpio.h>
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data cambria_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource cambria_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device cambria_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &cambria_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &cambria_flash_resource,
+};
+
+static struct i2c_gpio_platform_data cambria_i2c_gpio_data = {
+	.sda_pin	= 7,
+	.scl_pin	= 6,
+};
+
+static struct platform_device cambria_i2c_gpio = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &cambria_i2c_gpio_data,
+	},
+};
+
+static struct resource cambria_uart_resource = {
+	.start	= IXP4XX_UART1_BASE_PHYS,
+	.end	= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct plat_serial8250_port cambria_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device cambria_uart = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= cambria_uart_data,
+	},
+	.num_resources	= 1,
+	.resource	= &cambria_uart_resource,
+};
+
+static struct resource cambria_pata_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM
+	},
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "intrq",
+		.start	= IRQ_IXP4XX_GPIO12,
+		.end	= IRQ_IXP4XX_GPIO12,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct ixp4xx_pata_data cambria_pata_data = {
+	.cs0_bits	= 0xbfff3c03,
+	.cs1_bits	= 0xbfff3c03,
+};
+
+static struct platform_device cambria_pata = {
+	.name			= "pata_ixp4xx_cf",
+	.id			= 0,
+	.dev.platform_data      = &cambria_pata_data,
+	.num_resources		= ARRAY_SIZE(cambria_pata_resources),
+	.resource		= cambria_pata_resources,
+};
+
+static struct eth_plat_info cambria_plat_eth[] = {
+        {
+		.phy		= 2,
+		.rxq		= 4,
+		.txreadyq	= 21,
+        }, {
+		.phy		= 1,
+		.rxq		= 2,
+		.txreadyq	= 19,
+	}
+};
+
+static struct platform_device cambria_eth[] = {
+        {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEC,
+                .dev.platform_data      = cambria_plat_eth,
+        }, {
+                .name                   = "ixp4xx_eth",
+                .id                     = IXP4XX_ETH_NPEA,
+                .dev.platform_data      = cambria_plat_eth + 1,
+	}
+};
+
+#ifdef CONFIG_LEDS_IXP4XX
+static struct platform_device cambria_leds_pld = {
+	.name		= "IXP4XX-PLD-LED",
+	.id		= -1,
+	.num_resources	= 0,
+};
+
+static struct platform_device cambria_leds_mem = {
+	.name		= "IXP4XX-MEM-LED",
+	.id		= -1,
+	.num_resources	= 0,
+};
+#endif
+
+static struct platform_device *cambria_devices[] __initdata = {
+	&cambria_i2c_gpio,
+	&cambria_flash,
+	&cambria_uart,
+#ifdef CONFIG_LEDS_IXP4XX
+	&cambria_leds_pld,
+	&cambria_leds_mem,
+#endif
+	&cambria_eth[0],
+	&cambria_eth[1],
+};
+
+static char cambria_rtc_probe[] __initdata = "rtc-ds1672.probe=0,0x68 ";
+
+static void __init cambria_fixup(struct machine_desc *desc,
+			struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+	struct tag *t = tags;
+	char *p = *cmdline;
+
+	/* Find the end of the tags table, taking note of any cmdline tag. */
+	for (; t->hdr.size; t = tag_next(t)) {
+		if (t->hdr.tag == ATAG_CMDLINE) {
+			p = t->u.cmdline.cmdline;
+		}
+	}
+
+	/* Overwrite the end of the table with a new cmdline tag. */
+	t->hdr.tag = ATAG_CMDLINE;
+	t->hdr.size = (sizeof (struct tag_header) +
+		strlen(cambria_rtc_probe) + strlen(p) + 1 + 4) >> 2;
+	strlcpy(t->u.cmdline.cmdline, cambria_rtc_probe, COMMAND_LINE_SIZE);
+	strlcpy(t->u.cmdline.cmdline + strlen(cambria_rtc_probe), p,
+		COMMAND_LINE_SIZE - strlen(cambria_rtc_probe));
+
+	/* Terminate the table. */
+	t = tag_next(t);
+	t->hdr.tag = ATAG_NONE;
+	t->hdr.size = 0;
+}
+
+#ifdef CONFIG_SENSORS_EEPROM
+static int cambria_eeprom_do(struct notifier_block *self, unsigned long event, void *t)
+{
+	struct eeprom_data *data = t;
+	struct sockaddr address;
+	struct net_device * netdev;
+
+	char macs[12];
+
+	/* The MACs are the first 12 bytes in the eeprom at address 0x51 */
+	if (event == EEPROM_REGISTER && data->client.addr == 0x51) {
+		data->attr->read(&data->client.dev.kobj, data->attr, macs, 0, 12);
+		/* eth0 */
+		memcpy(address.sa_data, macs, ETH_ALEN);
+		memcpy(&cambria_plat_eth[0].hwaddr, macs, ETH_ALEN);
+		if ( (netdev = dev_get_by_name(&init_net, "eth0")) )
+			netdev->set_mac_address(netdev, &address);
+
+		/* eth1 */
+		memcpy(address.sa_data, macs + ETH_ALEN, ETH_ALEN);
+		memcpy(&cambria_plat_eth[1].hwaddr, macs + ETH_ALEN, ETH_ALEN);
+		if ( (netdev = dev_get_by_name(&init_net, "eth1")) )
+			netdev->set_mac_address(netdev, &address);
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block cambria_eeprom_notifier = {
+	.notifier_call = cambria_eeprom_do
+};
+#endif
+
+static void __init cambria_init(void)
+{
+	ixp4xx_sys_init();
+
+#ifdef CONFIG_SENSORS_EEPROM
+	register_eeprom_notifier(&cambria_eeprom_notifier);
+#endif
+
+	cambria_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	cambria_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+	platform_add_devices(cambria_devices, ARRAY_SIZE(cambria_devices));
+
+	cambria_pata_resources[0].start = 0x53e00000;
+	cambria_pata_resources[0].end = 0x53e3ffff;
+
+	cambria_pata_resources[1].start = 0x53e40000;
+	cambria_pata_resources[1].end = 0x53e7ffff;
+
+	cambria_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
+	cambria_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
+
+	platform_device_register(&cambria_pata);
+}
+
+#ifdef CONFIG_MACH_CAMBRIA
+MACHINE_START(CAMBRIA, "Gateworks Cambria series")
+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.fixup		= cambria_fixup,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= cambria_init,
+MACHINE_END
+#endif
diff -Nur linux-2.6.24.5/include/asm-arm/arch-ixp4xx/hardware.h linux-2.6.24.5-owrt/include/asm-arm/arch-ixp4xx/hardware.h
--- linux-2.6.24.5/include/asm-arm/arch-ixp4xx/hardware.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.24.5-owrt/include/asm-arm/arch-ixp4xx/hardware.h	2008-04-28 21:07:16.000000000 +0200
@@ -18,7 +18,7 @@
 #define __ASM_ARCH_HARDWARE_H__
 
 #define PCIBIOS_MIN_IO		0x00001000
-#define PCIBIOS_MIN_MEM		(cpu_is_ixp43x() ? 0x40000000 : 0x48000000)
+#define PCIBIOS_MIN_MEM		(cpu_is_ixp43x() ? 0x48000000 : 0x48000000)
 
 /*
  * We override the standard dma-mask routines for bouncing.