path: root/target/linux/generic-2.6/patches-2.6.30/029-mips_kexec.patch

This patch updates kernel part of kexec for MIPS platform to support
kdump, 64-bit, SMP and simplify code adaptation to new boards. It does
the following:

- hooks for machine-specific actions are introduced
(_machine_kexec_prepare,
  _machine_kexec_shutdown, _machine_crash_shutdown);
- kexec reboot on SMP machine is implemented;
- add boot parameters passing to new kernel (array kexec_args[] is
copied to
  registers a0-a3 on reboot );
- crash dump functionality is added (boot kernel with non-default physical
  start, parse "crashkernel=..." command line parameter, copy_oldmem_page()
  is implemeted to read memory dump after reboot-on-crashi,
crash_setup_regs()
  is updated to correctly store registers on crash);

kexec/kdump funtionality was tested on several Cavium Octeon boards
(mips64 SMP). The way we do it was the following:
- _machine_kexec_prepare was find kexec segment with command line and
save it's pointed into internal bootloader structure.
- _machine_kexec_shutdown was used to stop boards IO and make all non-boot
CPUs spin in function relocated_kexec_smp_wait()
- _machine_crash_shutdown just calls default_machine_crash_shutdown()
We tested 1) 'common' kexec reboot (by 'kexec -e'), 2) kexec-on-panic
('kexec -p ...') and 3) access to/proc/vmcore (with gdb).

Signed-off-by: Maxim Syrchin <[11]msyrchin at ru.mvista.com>
---
arch/mips/Kconfig                  |   23 +++++++++
arch/mips/Makefile                 |    4 ++
arch/mips/kernel/Makefile          |    3 +-
arch/mips/kernel/crash.c           |   91 ++++++++++++++++++++++++++++++++++
arch/mips/kernel/crash_dump.c      |   96 ++++++++++++++++++++++++++++++++++++
arch/mips/kernel/machine_kexec.c   |   52 ++++++++++++++++++-
arch/mips/kernel/relocate_kernel.S |   93 ++++++++++++++++++++++++++++++++++-
arch/mips/kernel/setup.c           |   10 +++-
arch/mips/include/asm/kexec.h           |   21 ++++++++-
9 files changed, 386 insertions(+), 7 deletions(-)
create mode 100644 arch/mips/kernel/crash.c
create mode 100644 arch/mips/kernel/crash_dump.c

---
 arch/mips/Kconfig                  |   23 	23 +	0 -	0 !
 arch/mips/Makefile                 |    4 	4 +	0 -	0 !
 arch/mips/kernel/Makefile          |    3 	2 +	1 -	0 !
 arch/mips/kernel/crash.c           |   90 	90 +	0 -	0 !
 arch/mips/kernel/crash_dump.c      |   96 	96 +	0 -	0 !
 arch/mips/kernel/machine_kexec.c   |   66 	60 +	6 -	0 !
 arch/mips/kernel/relocate_kernel.S |   96 	95 +	1 -	0 !
 arch/mips/kernel/setup.c           |   10 	9 +	1 -	0 !
 arch/mips/include/asm/kexec.h      |   21 	20 +	1 -	0 !
 9 files changed, 399 insertions(+), 10 deletions(-)

--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1966,6 +1966,29 @@ config KEXEC
 	  support.  As of this writing the exact hardware interface is
 	  strongly in flux, so no good recommendation can be made.
 
+config CRASH_DUMP
+    bool "kernel crash dumps (EXPERIMENTAL)"
+    depends on EXPERIMENTAL
+    help
+      Generate crash dump after being started by kexec.
+          This should be normally only set in special crash dump kernels
+      which are loaded in the main kernel with kexec-tools into
+      a specially reserved region and then later executed after
+      a crash by kdump/kexec. The crash dump kernel must be compiled
+          to a memory address not used by the main kernel or BIOS using
+          PHYSICAL_START.
+
+config PHYSICAL_START
+    hex "Physical address where the kernel is loaded"
+    default "0xffffffff84000000"
+    depends on CRASH_DUMP
+    help
+      This gives the CKSEG0 or KSEG0 address where the kernel is loaded.
+      If you plan to use kernel for capturing the crash dump change
+      this value to start of the reserved region (the "X" value as
+      specified in the "crashkernel=[12]YM at XM" command line boot parameter
+      passed to the panic-ed kernel).
+
 config SECCOMP
 	bool "Enable seccomp to safely compute untrusted bytecode"
 	depends on PROC_FS
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -603,6 +603,10 @@ else
 load-$(CONFIG_CPU_CAVIUM_OCTEON) 	+= 0xffffffff81100000
 endif
 
+ifdef CONFIG_PHYSICAL_START
+load-y			= $(CONFIG_PHYSICAL_START)
+endif
+
 cflags-y			+= -I$(srctree)/arch/mips/include/asm/mach-generic
 drivers-$(CONFIG_PCI)		+= arch/mips/pci/
 
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -83,7 +83,8 @@ obj-$(CONFIG_I8253)		+= i8253.o
 
 obj-$(CONFIG_GPIO_TXX9)		+= gpio_txx9.o
 
-obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_KEXEC)        += machine_kexec.o relocate_kernel.o crash.o
+obj-$(CONFIG_CRASH_DUMP)    += crash_dump.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_MIPS_MACHINE)	+= mips_machine.o
 
--- /dev/null
+++ b/arch/mips/kernel/crash.c
@@ -0,0 +1,90 @@
+/*
+ * Architecture specific (MIPS) functions for kexec based crash dumps.
+ *
+ * Copyright (C) 2005, IBM Corp.
+ * Copyright (C) 2008, MontaVista Software Inc.
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2.  See the file COPYING for more details.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/reboot.h>
+#include <linux/kexec.h>
+#include <linux/bootmem.h>
+#include <linux/crash_dump.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+
+
+
+/* This keeps a track of which one is crashing cpu. */
+int crashing_cpu = -1;
+static cpumask_t cpus_in_crash = CPU_MASK_NONE;
+
+#ifdef CONFIG_SMP
+
+void crash_shutdown_secondary(void *ignore)
+{
+    struct pt_regs* regs;
+    int cpu = smp_processor_id();
+
+    regs = task_pt_regs(current);
+    if (!cpu_online(cpu))
+        return;
+
+    local_irq_disable();
+    if (!cpu_isset(cpu, cpus_in_crash))
+        crash_save_cpu(regs, cpu);
+    cpu_set(cpu, cpus_in_crash);
+
+    while(!atomic_read(&kexec_ready_to_reboot)) {
+        cpu_relax();
+    }
+    relocated_kexec_smp_wait(NULL);
+    /* NOTREACHED */
+}
+
+static void crash_kexec_prepare_cpus(void)
+{
+    unsigned int msecs;
+
+    unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
+
+    smp_call_function (crash_shutdown_secondary, NULL, 0);
+    smp_wmb();
+
+    /*
+     * FIXME: Until we will have the way to stop other CPUSs reliabally,
+     * the crash CPU will send an IPI and wait for other CPUs to
+     * respond.
+     * Delay of at least 10 seconds.
+     */
+    printk(KERN_EMERG "Sending IPI to other cpus...\n");
+    msecs = 10000;
+    while ((cpus_weight(cpus_in_crash) < ncpus) && (--msecs > 0)) {
+        cpu_relax();
+        mdelay(1);
+    }
+
+}
+
+#else
+static void crash_kexec_prepare_cpus(void) {}
+#endif
+
+void default_machine_crash_shutdown(struct pt_regs *regs)
+{
+    local_irq_disable();
+    crashing_cpu = smp_processor_id();
+    crash_save_cpu(regs, crashing_cpu);
+    crash_kexec_prepare_cpus();
+    cpu_set(crashing_cpu, cpus_in_crash);
+}
--- /dev/null
+++ b/arch/mips/kernel/crash_dump.c
@@ -0,0 +1,96 @@
+/*
+ * Routines for doing kexec-based kdump.
+ *
+ * Copyright (C) 2005, IBM Corp.
+ * Copyright (C) 2008, MontaVista Software Inc.
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2.  See the file COPYING for more details.
+ */
+
+#include <linux/highmem.h>
+#include <linux/bootmem.h>
+#include <linux/crash_dump.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_PROC_VMCORE
+static int __init parse_elfcorehdr(char *p)
+{
+    if (p)
+        elfcorehdr_addr = memparse(p, &p);
+    return 1;
+}
+__setup("elfcorehdr=", parse_elfcorehdr);
+#endif
+
+static int __init parse_savemaxmem(char *p)
+{
+    if (p)
+        saved_max_pfn = (memparse(p, &p) >> PAGE_SHIFT) - 1;
+
+    return 1;
+}
+__setup("savemaxmem=", parse_savemaxmem);
+
+
+static void *kdump_buf_page;
+
+/**
+ * copy_oldmem_page - copy one page from "oldmem"
+ * @pfn: page frame number to be copied
+ * @buf: target memory address for the copy; this can be in kernel address
+ *    space or user address space (see @userbuf)
+ * @csize: number of bytes to copy
+ * @offset: offset in bytes into the page (based on pfn) to begin the copy
+ * @userbuf: if set, @buf is in user address space, use copy_to_user(),
+ *    otherwise @buf is in kernel address space, use memcpy().
+ *
+ * Copy a page from "oldmem". For this page, there is no pte mapped
+ * in the current kernel.
+ *
+ * Calling copy_to_user() in atomic context is not desirable. Hence first
+ * copying the data to a pre-allocated kernel page and then copying to user
+ * space in non-atomic context.
+ */
+ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
+                               size_t csize, unsigned long offset, int userbuf)
+{
+    void  *vaddr;
+
+    if (!csize)
+        return 0;
+
+    vaddr = kmap_atomic_pfn(pfn, KM_PTE0);
+
+    if (!userbuf) {
+        memcpy(buf, (vaddr + offset), csize);
+        kunmap_atomic(vaddr, KM_PTE0);
+    } else {
+        if (!kdump_buf_page) {
+            printk(KERN_WARNING "Kdump: Kdump buffer page not"
+                " allocated\n");
+            return -EFAULT;
+        }
+        copy_page(kdump_buf_page, vaddr);
+        kunmap_atomic(vaddr, KM_PTE0);
+        if (copy_to_user(buf, (kdump_buf_page + offset), csize))
+            return -EFAULT;
+    }
+
+    return csize;
+}
+
+static int __init kdump_buf_page_init(void)
+{
+    int ret = 0;
+
+    kdump_buf_page = kmalloc(PAGE_SIZE, GFP_KERNEL);
+    if (!kdump_buf_page) {
+        printk(KERN_WARNING "Kdump: Failed to allocate kdump buffer"
+             " page\n");
+        ret = -ENOMEM;
+    }
+
+    return ret;
+}
+arch_initcall(kdump_buf_page_init);
--- a/arch/mips/kernel/machine_kexec.c
+++ b/arch/mips/kernel/machine_kexec.c
@@ -19,9 +19,25 @@ extern const size_t relocate_new_kernel_
 extern unsigned long kexec_start_address;
 extern unsigned long kexec_indirection_page;
 
+extern unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3;
+
+int (*_machine_kexec_prepare)(struct kimage *) = NULL;
+void (*_machine_kexec_shutdown)(void) = NULL;
+void (*_machine_crash_shutdown)(struct pt_regs *regs) = NULL;
+#ifdef CONFIG_SMP
+void (*relocated_kexec_smp_wait) (void *);
+atomic_t kexec_ready_to_reboot = ATOMIC_INIT(0);
+#endif
+
 int
 machine_kexec_prepare(struct kimage *kimage)
 {
+	kexec_args[0] = fw_arg0;
+	kexec_args[1] = fw_arg1;
+	kexec_args[2] = fw_arg2;
+	kexec_args[3] = fw_arg3;
+	if (_machine_kexec_prepare)
+        	return _machine_kexec_prepare(kimage);
 	return 0;
 }
 
@@ -33,13 +49,18 @@ machine_kexec_cleanup(struct kimage *kim
 void
 machine_shutdown(void)
 {
+    if (_machine_kexec_shutdown)
+        _machine_kexec_shutdown();
 }
 
 void
 machine_crash_shutdown(struct pt_regs *regs)
 {
+    if (_machine_crash_shutdown)
+        _machine_crash_shutdown(regs);
+    else
+        default_machine_crash_shutdown(regs);
 }
-
 typedef void (*noretfun_t)(void) __attribute__((noreturn));
 
 void
@@ -52,7 +73,9 @@ machine_kexec(struct kimage *image)
 	reboot_code_buffer =
 	  (unsigned long)page_address(image->control_code_page);
 
-	kexec_start_address = image->start;
+     kexec_start_address =
+        (unsigned long) phys_to_virt(image->start);
+
 	kexec_indirection_page =
 		(unsigned long) phys_to_virt(image->head & PAGE_MASK);
 
@@ -63,7 +86,7 @@ machine_kexec(struct kimage *image)
 	 * The generic kexec code builds a page list with physical
 	 * addresses. they are directly accessible through KSEG0 (or
 	 * CKSEG0 or XPHYS if on 64bit system), hence the
-	 * pys_to_virt() call.
+     * phys_to_virt() call.
 	 */
 	for (ptr = &image->head; (entry = *ptr) && !(entry &IND_DONE);
 	     ptr = (entry & IND_INDIRECTION) ?
@@ -78,8 +101,39 @@ machine_kexec(struct kimage *image)
 	 */
 	local_irq_disable();
 
-	printk("Will call new kernel at %08lx\n", image->start);
-	printk("Bye ...\n");
+	printk(KERN_EMERG "Will call new kernel at %08lx\n", image->start);
+	printk(KERN_EMERG "Bye ...\n");
 	__flush_cache_all();
-	((noretfun_t) reboot_code_buffer)();
+#ifdef CONFIG_SMP
+    /* All secondary cpus now may jump to kexec_wait cycle */
+    relocated_kexec_smp_wait = (void *)(reboot_code_buffer +
+        (kexec_smp_wait - relocate_new_kernel));
+    smp_wmb();
+    atomic_set(&kexec_ready_to_reboot,1);
+#endif
+
+    	((noretfun_t) reboot_code_buffer)();
+	printk(KERN_EMERG "Bye ...\n");
+}
+
+/* crashkernel=[13]size at addr specifies the location to reserve for
+ * a crash kernel.  By reserving this memory we guarantee
+ * that linux never sets it up as a DMA target.
+ * Useful for holding code to do something appropriate
+ * after a kernel panic.
+ */
+static int __init parse_crashkernel_cmdline(char *arg)
+{
+    unsigned long size, base;
+    size = memparse(arg, &arg);
+    if (*arg == '@') {
+        base = memparse(arg+1, &arg);
+        /* FIXME: Do I want a sanity check
+         * to validate the memory range?
+         */
+        crashk_res.start = base;
+        crashk_res.end   = base + size - 1;
+    }
+    return 0;
 }
+early_param("crashkernel", parse_crashkernel_cmdline);
--- a/arch/mips/kernel/relocate_kernel.S
+++ b/arch/mips/kernel/relocate_kernel.S
@@ -14,7 +14,13 @@
 #include <asm/stackframe.h>
 #include <asm/addrspace.h>
 
+
 LEAF(relocate_new_kernel)
+     PTR_L a0,    arg0
+     PTR_L a1,    arg1
+     PTR_L a2,    arg2
+     PTR_L a3,    arg3
+
 	PTR_L		s0, kexec_indirection_page
 	PTR_L		s1, kexec_start_address
 
@@ -26,7 +32,6 @@ process_entry:
 	and		s3, s2, 0x1
 	beq		s3, zero, 1f
 	and		s4, s2, ~0x1	/* store destination addr in s4 */
-	move		a0, s4
 	b		process_entry
 
 1:
@@ -40,6 +45,7 @@ process_entry:
 	/* done page */
 	and		s3, s2, 0x4
 	beq		s3, zero, 1f
+	nop
 	b		done
 1:
 	/* source page */
@@ -56,14 +62,102 @@ copy_word:
 	PTR_ADD		s2, s2, SZREG
 	LONG_SUB	s6, s6, 1
 	beq		s6, zero, process_entry
+	nop
 	b		copy_word
+	nop
 	b		process_entry
 
 done:
+#ifdef CONFIG_SMP
+    /* kexec_flag reset is signal to other CPUs what kernel
+        was moved to it's location. Note - we need relocated address
+        of kexec_flag.  */
+
+     bal        1f
+ 1:     move        t1,ra;
+     PTR_LA        t2,1b
+     PTR_LA        t0,kexec_flag
+     PTR_SUB        t0,t0,t2;
+     PTR_ADD        t0,t1,t0;
+     LONG_S        zero,(t0)
+#endif
+
+     /* Some platforms need I-cache to be flushed before
+     * jumping to new kernel.
+      */
+
 	/* jump to kexec_start_address */
 	j		s1
 	END(relocate_new_kernel)
 
+#ifdef CONFIG_SMP
+/*
+ * Other CPUs should wait until code is relocated and
+ * then start at entry point.
+ */
+LEAF(kexec_smp_wait)
+    PTR_L        a0, s_arg0
+    PTR_L        a1, s_arg1
+    PTR_L        a2, s_arg2
+    PTR_L        a3, s_arg3
+    PTR_L        s1, kexec_start_address
+
+    /* Non-relocated address works for args and kexec_start_address ( old
+     * kernel is not overwritten). But we need relocated address of
+     * kexec_flag.
+     */
+
+    bal        1f
+1:    move        t1,ra;
+    PTR_LA        t2,1b
+    PTR_LA        t0,kexec_flag
+    PTR_SUB        t0,t0,t2;
+    PTR_ADD        t0,t1,t0;
+
+1:    LONG_L        s0, (t0)
+    bne        s0, zero,1b
+
+    j        s1
+    END(kexec_smp_wait)
+#endif
+
+
+#ifdef __mips64
+       /* all PTR's must be aligned to 8 byte in 64-bit mode */
+       .align  3
+#endif
+
+/* All parameters to new kernel are passed in registers a0-a3.
+ * kexec_args[0..3] are uses to prepare register values.
+ */
+
+kexec_args:
+    EXPORT(kexec_args)
+arg0:    PTR        0x0
+arg1:    PTR        0x0
+arg2:    PTR        0x0
+arg3:    PTR        0x0
+    .size    kexec_args,PTRSIZE*4
+
+#ifdef CONFIG_SMP
+/*
+ * Secondary CPUs may have different kernel parameters in
+ * their registers a0-a3. secondary_kexec_args[0..3] are used
+ * to prepare register values.
+ */
+secondary_kexec_args:
+    EXPORT(secondary_kexec_args)
+s_arg0:    PTR        0x0
+s_arg1:    PTR        0x0
+s_arg2:    PTR        0x0
+s_arg3:    PTR        0x0
+    .size    secondary_kexec_args,PTRSIZE*4
+kexec_flag:
+    LONG        0x1
+
+#endif
+
+
 kexec_start_address:
 	EXPORT(kexec_start_address)
 	PTR		0x0
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -21,7 +21,7 @@
 #include <linux/console.h>
 #include <linux/pfn.h>
 #include <linux/debugfs.h>
-
+#include <linux/kexec.h>
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 #include <asm/bugs.h>
@@ -489,6 +489,11 @@ static void __init arch_mem_init(char **
 	}
 
 	bootmem_init();
+#ifdef CONFIG_CRASH_DUMP
+    if (crashk_res.start != crashk_res.end)
+        reserve_bootmem(crashk_res.start,
+                crashk_res.end - crashk_res.start + 1);
+#endif
 	sparse_init();
 	paging_init();
 }
@@ -543,6 +548,9 @@ static void __init resource_init(void)
 		 */
 		request_resource(res, &code_resource);
 		request_resource(res, &data_resource);
+#ifdef CONFIG_KEXEC
+        request_resource(res, &crashk_res);
+#endif
 	}
 }
 
--- a/arch/mips/include/asm/kexec.h
+++ b/arch/mips/include/asm/kexec.h
@@ -9,6 +9,8 @@
 #ifndef _MIPS_KEXEC
 # define _MIPS_KEXEC
 
+#include <asm/stacktrace.h>
+
 /* Maximum physical address we can use pages from */
 #define KEXEC_SOURCE_MEMORY_LIMIT (0x20000000)
 /* Maximum address we can reach in physical address mode */
@@ -24,7 +26,24 @@
 static inline void crash_setup_regs(struct pt_regs *newregs,
 				    struct pt_regs *oldregs)
 {
-	/* Dummy implementation for now */
+    if (oldregs)
+        memcpy(newregs, oldregs, sizeof(*newregs));
+    else
+        prepare_frametrace(newregs);
 }
 
+#ifdef CONFIG_KEXEC
+struct kimage;
+extern unsigned long kexec_args[4];
+extern int (*_machine_kexec_prepare)(struct kimage *);
+extern void (*_machine_kexec_shutdown)(void);
+extern void (*_machine_crash_shutdown)(struct pt_regs *regs);
+extern void default_machine_crash_shutdown(struct pt_regs *regs);
+#ifdef CONFIG_SMP
+extern const unsigned char kexec_smp_wait[];
+extern unsigned long secondary_kexec_args[4];
+extern void (*relocated_kexec_smp_wait) (void *);
+extern atomic_t kexec_ready_to_reboot;
+#endif
+#endif
 #endif /* !_MIPS_KEXEC */