path: root/target/linux/coldfire/patches/080-mcfv4e_dspi_update.patch

From 771f4741de2cd8a103d96cd1e8281926448ff56d Mon Sep 17 00:00:00 2001
From: Kurt Mahan <kmahan@freescale.com>
Date: Tue, 15 Jul 2008 11:44:08 -0600
Subject: [PATCH] Fix DSPI driver.

Update to latest Matt Coldfire driver.  Fix timing issues with
M547x/M548x END-OF-QUEUE notification.

LTIBName: mcfv4e-dspi-update
Signed-off-by: Kurt Mahan <kmahan@freescale.com>
---
 arch/m68k/coldfire/m547x_8x-devices.c |   35 +-
 drivers/spi/Kconfig                   |    6 +
 drivers/spi/Makefile                  |    2 +-
 drivers/spi/dspi_mcf.c                | 1217 +++++++++++++++++++++++++++++++++
 include/asm-m68k/mcfdspi.h            |   48 ++
 5 files changed, 1296 insertions(+), 12 deletions(-)
 create mode 100644 drivers/spi/dspi_mcf.c
 create mode 100644 include/asm-m68k/mcfdspi.h

--- a/arch/m68k/coldfire/m547x_8x-devices.c
+++ b/arch/m68k/coldfire/m547x_8x-devices.c
@@ -26,26 +26,40 @@
  */
 
 /* number of supported SPI selects */
-#define SPI_NUM_CHIPSELECTS	4
+#define SPI_NUM_CHIPSELECTS	8
 
 void coldfire_spi_cs_control(u8 cs, u8 command)
 {
 	/* nothing special required */
 }
 
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct coldfire_spi_chip spidev_chip_info = {
+	.bits_per_word = 8,
+};
+#endif
+
 static struct spi_board_info spi_board_info[] = {
-	/* no board info */
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 16000000,  	/* max clk (SCK) speed in HZ */
+		.bus_num = 1,
+		.chip_select = 0,		/* CS0 */
+		.controller_data = &spidev_chip_info,
+ 	}
+#endif
 };
 
 static int spi_irq_list[] = {
-	/* IRQ, ICR Offset, ICR Val, Mask */
-	64 + ISC_DSPI_OVRFW, 0, 0, 0,
-	64 + ISC_DSPI_RFOF,  0, 0, 0,
-	64 + ISC_DSPI_RFDF,  0, 0, 0,
-	64 + ISC_DSPI_TFUF,  0, 0, 0,
-	64 + ISC_DSPI_TCF,   0, 0, 0,
-	64 + ISC_DSPI_TFFF,  0, 0, 0,
-	64 + ISC_DSPI_EOQF,  0, 0, 0,
+	/* IRQ, 	     ICR Offset, 	ICR Val,Mask */
+	64 + ISC_DSPI_OVRFW, ISC_DSPI_OVRFW,	0x18, 	0,
+	64 + ISC_DSPI_RFOF,  ISC_DSPI_RFOF,	0x18, 	0,
+	64 + ISC_DSPI_RFDF,  ISC_DSPI_RFDF,	0x18, 	0,
+	64 + ISC_DSPI_TFUF,  ISC_DSPI_TFUF,	0x18, 	0,
+	64 + ISC_DSPI_TCF,   ISC_DSPI_TCF,	0x18, 	0,
+	64 + ISC_DSPI_TFFF,  ISC_DSPI_TFFF,	0x18, 	0,
+	64 + ISC_DSPI_EOQF,  ISC_DSPI_EOQF,	0x18, 	0,
 	0,0,0,0,
 };
 
@@ -120,7 +134,6 @@ static int __init m547x_8x_spi_init(void
 	/* register device */
 	retval = platform_device_register(&coldfire_spi);
 	if (retval < 0) {
-		printk(KERN_ERR "SPI-m547x_8x: platform_device_register failed with code=%d\n", retval);
 		goto out;
 	}
 
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -130,6 +130,12 @@ config SPI_COLDFIRE
 	  Tested with the 5282 processor, but should also work with other
 	  Coldfire variants.
 
+config SPI_DSPI
+	tristate "Coldfire DSPI"
+	depends on SPI_MASTER && COLDFIRE
+	help
+	  SPI driver for Coldfire DSPI driver only.
+
 config SPI_COLDFIRE_DSPI_EDMA	  
 	boolean "Coldfire DSPI master driver uses eDMA"
 	depends on SPI_MASTER && COLDFIRE && SPI_COLDFIRE && EXPERIMENTAL && COLDFIRE_EDMA
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -19,7 +19,7 @@ obj-$(CONFIG_SPI_BITBANG)		+= spi_bitban
 obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
 obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
 # obj-$(CONFIG_SPI_COLDFIRE)		+= spi_coldfire.o spi-m5445x.o
-obj-$(CONFIG_SPI_COLDFIRE)		+= spi_coldfire.o
+obj-$(CONFIG_SPI_DSPI)			+= dspi_mcf.o
 obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
 obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
 obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
--- /dev/null
+++ b/drivers/spi/dspi_mcf.c
@@ -0,0 +1,1217 @@
+/*
+ * dspi_mcf.c - DSPI controller for ColdFire processors
+ *
+ *
+ *      Matt Waddel Matt.Waddel@freescale.com
+ *      Copyright Freescale Semiconductor, Inc. 2008
+ *
+ * 	M547x/M548x changes by Kurt Mahan kmahan@freescale.com
+ *      Copyright Freescale Semiconductor, Inc. 2008
+ *
+ *      Based on spi_coldfire.c done by:
+ *              Andrey Butok
+ *              Yaroslav Vinogradov
+ *              Copyright Freescale Semiconductor, Inc. 2006-2007
+ *              Mike Lavender (mike@steroidmicros)
+ *              (C) Copyright 2005, Intec Automation,
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ ***************************************************************************
+ * Changes:
+ *   v0.002	M547x/M548x support.
+ *   v0.001	Initial version. Coldfire DSPI master driver.
+ ****************************************************************************/
+
+/*
+ * Includes
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfqspi.h>
+#include <asm/coldfire.h>
+#include <linux/io.h>
+#include <asm/mcfdspi.h>
+#include <linux/dma-mapping.h>
+
+#undef DSPI_COLDFIRE_DEBUG
+
+#ifdef DSPI_COLDFIRE_DEBUG
+#define DBG(fmt, args...) \
+	printk(KERN_INFO "[%s]  " fmt , __FUNCTION__, ## args)
+#else
+#define DBG(fmt, args...)	do {} while (0)
+#endif
+
+#if defined(CONFIG_M54455)
+#include <asm/mcf5445x_dspi.h>
+#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA)
+	#include <asm/mcf5445x_edma.h>
+#endif
+#endif
+
+#if defined(CONFIG_M547X_8X)
+#include <asm/virtconvert.h>
+#include <asm/m5485dspi.h>
+#endif
+
+#if defined(CONFIG_SPI_COLDFIRE_DSPI_EDMA)
+#include <asm/mcf_edma.h>
+#define SPI_DSPI_EDMA
+#define EDMA_BUFSIZE_KMALLOC	(DSPI_FIFO_SIZE*4)
+#define DSPI_DMA_RX_TCD		MCF_EDMA_CHAN_DSPI_RX
+#define DSPI_DMA_TX_TCD 	MCF_EDMA_CHAN_DSPI_TX
+#endif
+
+#define DSPI_BITS	MCF_DSPI_DCTAR_FMSZ(0xF)
+#define DSPI_BITS_16	MCF_DSPI_DCTAR_FMSZ(0xF)
+#define DSPI_BITS_8	MCF_DSPI_DCTAR_FMSZ(0x7)
+#define DSPI_FIFO_SIZE	16
+
+#define DRIVER_NAME "Coldfire DSPI"
+
+/****************************************************************************/
+
+/*
+ * Local constants and macros
+ */
+
+#define START_STATE ((void *)0)
+#define RUNNING_STATE ((void *)1)
+#define DONE_STATE ((void *)2)
+#define ERROR_STATE ((void *)-1)
+
+#define QUEUE_RUNNING 0
+#define QUEUE_STOPPED 1
+
+/****************************************************************************/
+
+/*
+ * Local Data Structures
+ */
+
+struct DSPI_MCR {
+	unsigned master:1;
+	unsigned cont_scke:1;
+	unsigned dconf:2;
+	unsigned frz:1;
+	unsigned mtfe:1;
+	unsigned pcsse:1;
+	unsigned rooe:1;
+	unsigned pcsis:8;
+	unsigned reserved15:1;
+	unsigned mdis:1;
+	unsigned dis_tx:1;
+	unsigned dis_rxf:1;
+	unsigned clr_tx:1;
+	unsigned clr_rxf:1;
+	unsigned smpl_pt:2;
+	unsigned reserved71:7;
+	unsigned halt:1;
+};
+
+struct DSPI_CTAR {
+	unsigned dbr:1;
+	unsigned fmsz:4;
+	unsigned cpol:1;
+	unsigned cpha:1;
+	unsigned lsbfe:1;
+	unsigned pcssck:2;
+	unsigned pasc:2;
+	unsigned pdt:2;
+	unsigned pbr:2;
+	unsigned cssck:4;
+	unsigned asc:4;
+	unsigned dt:4;
+	unsigned br:4;
+};
+
+struct chip_data {
+	/* dspi data */
+	union {
+		u32 mcr_val;
+		struct DSPI_MCR mcr;
+	};
+	union {
+		u32 ctar_val;
+		struct DSPI_CTAR ctar;
+	};
+	u16 void_write_data;
+};
+
+
+struct driver_data {
+	/* Driver model hookup */
+	struct platform_device *pdev;
+
+	/* SPI framework hookup */
+	struct spi_master *master;
+
+	/* Driver message queue */
+	struct workqueue_struct	*workqueue;
+	struct work_struct pump_messages;
+	spinlock_t lock; /* lock */
+	struct list_head queue;
+	int busy;
+	int run;
+
+	/* Message Transfer pump */
+	struct tasklet_struct pump_transfers;
+
+	/* Current message transfer state info */
+	struct spi_message *cur_msg;
+	struct spi_transfer *cur_transfer;
+	struct chip_data *cur_chip;
+	size_t len;
+	void *tx;
+	void *tx_end;
+	void *rx;
+	void *rx_end;
+	char flags;
+#define TRAN_STATE_RX_VOID	   0x01
+#define TRAN_STATE_TX_VOID 	   0x02
+#define TRAN_STATE_WORD_ODD_NUM	   0x04
+	u8 cs;
+	u16 void_write_data;
+	unsigned cs_change:1;
+
+	u32 trans_cnt;
+	u32 wce_cnt;
+	u32 abrt_cnt;
+	u32 *mcr;		/* DSPI MCR register */
+	u32 *ctar;		/* DSPI CTAR register */
+	u32 *dspi_dtfr;		/* DSPI DTFR register */
+	u32 *dspi_drfr;		/* DSPI DRFR register */
+	u32 *dspi_rser;		/* DSPI RSER register */
+	u32 *dspi_sr;		/* DSPI status register */
+
+#if defined(SPI_DSPI_EDMA)
+	void *edma_tx_buf;
+	void *edma_rx_buf;
+#endif
+
+#if defined(CONFIG_M532x) || defined(CONFIG_M537x)
+	u16 *par;	   /* Pin assignment register */
+#else
+	u8  *par;	   /* Pin assignment register */
+#endif
+	u8  *int_icr;	   /* Interrupt level and priority register */
+	u32 *int_mr;       /* Interrupt mask register */
+	void (*cs_control)(u8 cs, u8 command);
+};
+
+#define DSPI_CS(cs) ((1<<(cs))<<16)
+
+/****************************************************************************/
+
+/*
+ * SPI local functions
+ */
+
+static void *next_transfer(struct driver_data *drv_data)
+{
+	struct spi_message *msg = drv_data->cur_msg;
+	struct spi_transfer *trans = drv_data->cur_transfer;
+
+	DBG("\n");
+	/* Move to next transfer */
+	if (trans->transfer_list.next != &msg->transfers) {
+		drv_data->cur_transfer = list_entry(trans->transfer_list.next,
+						    struct spi_transfer,
+						    transfer_list);
+
+		if (drv_data->cur_transfer->transfer_list.next
+			== &msg->transfers) /* last transfer */
+			drv_data->cur_transfer->cs_change = 1;
+
+		return RUNNING_STATE;
+	} else
+		return DONE_STATE;
+}
+
+
+static inline int is_word_transfer(struct driver_data *drv_data)
+{
+	return ((*(drv_data->ctar+drv_data->cs) & DSPI_BITS_16) ==
+						  DSPI_BITS_8) ? 0 : 1;
+}
+
+static inline void set_8bit_transfer_mode(struct driver_data *drv_data)
+{
+	DBG("\n");
+	*(drv_data->ctar+drv_data->cs) =
+		(*(drv_data->ctar + drv_data->cs) & ~DSPI_BITS) | DSPI_BITS_8;
+}
+
+static inline void set_16bit_transfer_mode(struct driver_data *drv_data)
+{
+	DBG("\n");
+	*(drv_data->ctar+drv_data->cs) =
+		(*(drv_data->ctar + drv_data->cs) & ~DSPI_BITS) | DSPI_BITS_16;
+}
+
+static unsigned char hz_to_spi_baud(int pbr, int dbr, int speed_hz)
+{
+	int pbr_tbl[4] = {2, 3, 5, 7}; /* Valid baud rate pre-scaler values */
+	int brs[16] = {	2,	4,	6,	8,
+			16,	32,	64,	128,
+			256,	512,	1024,	2048,
+			4096,	8192,	16384,	32768 };
+	int temp, index = 0;
+
+	if ((pbr < 0) || (pbr > 3) ||
+	    (dbr < 0) || (dbr > 1))
+		return 15; /* table indexes out of range, go slow */
+
+	temp = ((((MCF_CLK / 2) / pbr_tbl[pbr]) * (1 + dbr)) / speed_hz);
+
+	while (temp >= brs[index])
+		if (index++ >= 15)
+			break;
+
+	DBG("baud rate scaler = 0x%x - %d\n", index, brs[index]);
+	return(index);
+}
+
+static int write(struct driver_data *drv_data)
+{
+	int tx_count = 0;
+	int tx_word = is_word_transfer(drv_data);
+	u16 d16;
+	u8  d8;
+	u32 dspi_pushr = 0;
+	int first = 1;
+#if defined(SPI_DSPI_EDMA)
+	u32 *edma_wr = (u32 *)(drv_data->edma_tx_buf);
+#endif
+
+	/* If we are in word mode, but only have a single byte to transfer
+	 * then switch to byte mode temporarily.  Will switch back at the
+	 * end of the transfer. */
+	if (tx_word && ((drv_data->tx_end - drv_data->tx) == 1)) {
+		drv_data->flags |= TRAN_STATE_WORD_ODD_NUM;
+		set_8bit_transfer_mode(drv_data);
+		tx_word = 0;
+	}
+
+	while ((drv_data->tx < drv_data->tx_end) && (tx_count < DSPI_FIFO_SIZE)) {
+// DBG("while\n");
+		if (tx_word) {
+			if ((drv_data->tx_end - drv_data->tx) == 1)
+				break;
+
+			if (!(drv_data->flags & TRAN_STATE_TX_VOID))
+				d16 = *(u16 *)drv_data->tx;
+			else
+				d16 = drv_data->void_write_data;
+
+			dspi_pushr = MCF_DSPI_DTFR_TXDATA(d16) |
+				     DSPI_CS(drv_data->cs) |
+				     MCF_DSPI_DTFR_CTAS(drv_data->cs) |
+				     MCF_DSPI_DTFR_CONT;
+
+			drv_data->tx += 2;
+		} else {
+			if (!(drv_data->flags & TRAN_STATE_TX_VOID))
+				d8 = *(u8 *)drv_data->tx;
+			else
+				d8 = *(u8 *)&drv_data->void_write_data;
+
+			dspi_pushr = MCF_DSPI_DTFR_TXDATA(d8) |
+				     DSPI_CS(drv_data->cs) |
+				     MCF_DSPI_DTFR_CTAS(drv_data->cs) |
+				     MCF_DSPI_DTFR_CONT;
+
+			drv_data->tx++;
+		}
+
+		if (drv_data->tx == drv_data->tx_end
+			|| tx_count == DSPI_FIFO_SIZE-1) {
+			/* last transfer in the queue */
+			dspi_pushr |= MCF_DSPI_DTFR_EOQ;
+			if ((drv_data->cs_change)
+			 && (drv_data->tx == drv_data->tx_end))
+				dspi_pushr &= ~MCF_DSPI_DTFR_CONT;
+#ifdef CONFIG_M547X_8X
+			/* EOQ gets missed if we don't delay */
+			udelay(100);
+#endif
+		} else if (tx_word && ((drv_data->tx_end - drv_data->tx) == 1))
+			dspi_pushr |= MCF_DSPI_DTFR_EOQ;
+
+		if (first) {
+			first = 0;
+			dspi_pushr |= MCF_DSPI_DTFR_CTCNT; /* clear counter */
+		}
+#if defined(SPI_DSPI_EDMA)
+		*edma_wr = dspi_pushr;
+		edma_wr++;
+#else
+		*drv_data->dspi_dtfr = dspi_pushr;
+#endif
+		tx_count++;
+	}
+
+#if defined(SPI_DSPI_EDMA)
+	if (tx_count > 0) {
+
+		mcf_edma_set_tcd_params(DSPI_DMA_TX_TCD,
+			virt_to_phys(drv_data->edma_tx_buf),
+			(u32)drv_data->dspi_dtfr,
+			MCF_EDMA_TCD_ATTR_SSIZE_32BIT
+			| MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
+			4,		/* soff */
+			4 * tx_count,	/* nbytes */
+			0,		/* slast */
+			1,		/* citer */
+			1,		/* biter */
+			0,		/* doff */
+			0,		/* dlastsga */
+			0,		/* major_int */
+			1);		/* disable_req */
+
+		mcf_edma_set_tcd_params(DSPI_DMA_RX_TCD,
+			(u32)drv_data->dspi_drfr,
+			virt_to_phys(drv_data->edma_rx_buf),
+			MCF_EDMA_TCD_ATTR_SSIZE_32BIT
+			| MCF_EDMA_TCD_ATTR_DSIZE_32BIT,
+			0,		/* soff */
+			4 * tx_count,	/* nbytes */
+			0,		/* slast */
+			1,		/* citer */
+			1,		/* biter */
+			4,		/* doff */
+			0,		/* dlastsga */
+			0,		/* major_int */
+			1);		/* disable_req */
+
+		mcf_edma_start_transfer(DSPI_DMA_TX_TCD);
+	}
+#endif
+	return (tx_count * (tx_word + 1));
+}
+
+static int read(struct driver_data *drv_data)
+{
+	int rx_count = 0;
+	int rx_word = is_word_transfer(drv_data);
+	u16 d;
+#if defined(SPI_DSPI_EDMA)
+	u32 *rx_edma = (u32 *) drv_data->edma_rx_buf;
+
+	/* receive SPI data */
+	mcf_edma_start_transfer(DSPI_DMA_RX_TCD);
+#endif
+	while ((drv_data->rx < drv_data->rx_end)
+		&& (rx_count < DSPI_FIFO_SIZE)) {
+
+		if (rx_word) {
+			if ((drv_data->rx_end - drv_data->rx) == 1)
+				break;
+#if defined(SPI_DSPI_EDMA)
+			d = MCF_DSPI_DRFR_RXDATA(*rx_edma);
+			rx_edma++;
+#else
+			d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr);
+#endif
+			if (!(drv_data->flags & TRAN_STATE_RX_VOID))
+				*(u16 *)drv_data->rx = d;
+			drv_data->rx += 2;
+
+		} else {
+#if defined(SPI_DSPI_EDMA)
+			d = MCF_DSPI_DRFR_RXDATA(*rx_edma);
+			rx_edma++;
+#else
+			d = MCF_DSPI_DRFR_RXDATA(*drv_data->dspi_drfr);
+#endif
+			if (!(drv_data->flags & TRAN_STATE_RX_VOID))
+				*(u8 *)drv_data->rx = d;
+			drv_data->rx++;
+		}
+		rx_count++;
+		DBG("rxd=0x%x\n", d);
+	}
+	return rx_count;
+}
+
+
+static inline void dspi_setup_chip(struct driver_data *drv_data)
+{
+	struct chip_data *chip = drv_data->cur_chip;
+
+	DBG("\n");
+	*drv_data->mcr = chip->mcr_val;
+	*(drv_data->ctar+drv_data->cs) = chip->ctar_val;
+	*drv_data->dspi_rser =  MCF_DSPI_DRSER_EOQFE;
+}
+
+#if defined(SPI_DSPI_EDMA)
+static int edma_tx_handler(int channel, void *dev)
+{
+	DBG("\n");
+	if (channel == DSPI_DMA_TX_TCD)
+		mcf_edma_stop_transfer(DSPI_DMA_TX_TCD);
+	return IRQ_HANDLED;
+}
+
+static int edma_rx_handler(int channel, void *dev)
+{
+	DBG("\n");
+	if (channel == DSPI_DMA_RX_TCD)
+		mcf_edma_stop_transfer(DSPI_DMA_RX_TCD);
+	return IRQ_HANDLED;
+}
+#endif
+
+static irqreturn_t dspi_interrupt(int irq, void *dev_id)
+{
+	struct driver_data *drv_data = (struct driver_data *)dev_id;
+	struct spi_message *msg = drv_data->cur_msg;
+
+	/* Clear all flags immediately */
+	*drv_data->dspi_sr = MCF_DSPI_DSR_EOQF;
+
+	if (!drv_data->cur_msg || !drv_data->cur_msg->state) {
+#if !defined(SPI_DSPI_EDMA)
+		u32 irq_status = *drv_data->dspi_sr;
+		/* if eDMA is used it happens some time (at least once)*/
+		printk(KERN_ERR "Bad message or transfer state handler. \
+				 IRQ status = %x\n", irq_status);
+#endif
+		return IRQ_NONE;
+	}
+
+	DBG("\n");
+	/*
+	 * Read the data into the buffer and reload and start
+	 * queue with new data if not finished.  If finished
+	 * then setup the next transfer
+	 */
+	read(drv_data);
+
+	if (drv_data->rx == drv_data->rx_end) {
+		/*
+		 * Finished now - fall through and schedule next
+		 * transfer tasklet
+		 */
+		if (drv_data->flags & TRAN_STATE_WORD_ODD_NUM)
+			set_16bit_transfer_mode(drv_data);
+
+		msg->state = next_transfer(drv_data);
+	} else {
+		/* not finished yet - keep going */
+		msg->actual_length += write(drv_data);
+		return IRQ_HANDLED;
+	}
+
+	tasklet_schedule(&drv_data->pump_transfers);
+
+	return IRQ_HANDLED;
+}
+
+/* caller already set message->status; dma and pio irqs are blocked */
+static void giveback(struct driver_data *drv_data)
+{
+	struct spi_transfer *last_transfer;
+	unsigned long flags;
+	struct spi_message *msg;
+	DBG("\n");
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+	msg = drv_data->cur_msg;
+	drv_data->cur_msg = NULL;
+	drv_data->cur_transfer = NULL;
+	drv_data->cur_chip = NULL;
+	queue_work(drv_data->workqueue, &drv_data->pump_messages);
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	last_transfer = list_entry(msg->transfers.prev,
+				   struct spi_transfer,	transfer_list);
+
+	if (!last_transfer->cs_change)
+		drv_data->cs_control(drv_data->cs, QSPI_CS_DROP);
+
+	msg->state = NULL;
+	if (msg->complete)
+		msg->complete(msg->context);
+}
+
+
+static void pump_transfers(unsigned long data)
+{
+	struct driver_data *drv_data = (struct driver_data *)data;
+	struct spi_message *message = NULL;
+	struct spi_transfer *transfer = NULL;
+	struct spi_transfer *previous = NULL;
+	struct chip_data *chip = NULL;
+	unsigned long flags;
+	DBG("\n");
+	/* Get current state information */
+	message = drv_data->cur_msg;
+	transfer = drv_data->cur_transfer;
+	chip = drv_data->cur_chip;
+
+	/* Handle for abort */
+	if (message->state == ERROR_STATE) {
+		message->status = -EIO;
+		giveback(drv_data);
+		return;
+	}
+
+	/* Handle end of message */
+	if (message->state == DONE_STATE) {
+		message->status = 0;
+		giveback(drv_data);
+		return;
+	}
+
+	if (message->state == START_STATE) {
+		dspi_setup_chip(drv_data);
+
+		if (drv_data->cs_control)
+			drv_data->cs_control(message->spi->chip_select,
+				QSPI_CS_ASSERT);
+	}
+
+	/* Delay if requested at end of transfer*/
+	if (message->state == RUNNING_STATE) {
+		previous = list_entry(transfer->transfer_list.prev,
+					struct spi_transfer,
+					transfer_list);
+
+		if (drv_data->cs_control && transfer->cs_change)
+			drv_data->cs_control(message->spi->chip_select,
+				QSPI_CS_DROP);
+
+		if (previous->delay_usecs)
+			udelay(previous->delay_usecs);
+
+		if (drv_data->cs_control && transfer->cs_change)
+			drv_data->cs_control(message->spi->chip_select,
+				QSPI_CS_ASSERT);
+	}
+
+	drv_data->flags = 0;
+	drv_data->tx = (void *)transfer->tx_buf;
+	drv_data->tx_end = drv_data->tx + transfer->len;
+	drv_data->rx = transfer->rx_buf;
+	drv_data->rx_end = drv_data->rx + transfer->len;
+
+	if (!drv_data->rx)
+		drv_data->flags |= TRAN_STATE_RX_VOID;
+	if (!drv_data->tx)
+		drv_data->flags |= TRAN_STATE_TX_VOID;
+	drv_data->cs = message->spi->chip_select;
+	drv_data->cs_change = transfer->cs_change;
+	drv_data->void_write_data = chip->void_write_data;
+	if (transfer->speed_hz) {
+		*(drv_data->ctar + drv_data->cs) = \
+			((chip->ctar_val & ~0xF) | \
+			  hz_to_spi_baud(chip->ctar.pbr, \
+					 chip->ctar.dbr, \
+					 transfer->speed_hz));
+	}
+
+	message->state = RUNNING_STATE;
+	/* Go baby, go */
+	local_irq_save(flags);
+	message->actual_length += write(drv_data);
+	local_irq_restore(flags);
+}
+
+
+static void pump_messages(struct work_struct *work)
+{
+	struct driver_data *drv_data;
+	unsigned long flags;
+	DBG("\n");
+
+	drv_data = container_of(work, struct driver_data, pump_messages);
+
+	/* Lock queue and check for queue work */
+	spin_lock_irqsave(&drv_data->lock, flags);
+	if (list_empty(&drv_data->queue)
+		|| drv_data->run == QUEUE_STOPPED) {
+		drv_data->busy = 0;
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return;
+	}
+
+	/* Make sure we are not already running a message */
+	if (drv_data->cur_msg) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return;
+	}
+
+	/* Extract head of queue */
+	drv_data->cur_msg = list_entry(drv_data->queue.next,
+					struct spi_message, queue);
+	list_del_init(&drv_data->cur_msg->queue);
+
+	/* Initial message state*/
+	drv_data->cur_msg->state = START_STATE;
+	drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
+						struct spi_transfer,
+						transfer_list);
+
+	if (drv_data->cur_transfer->transfer_list.next
+		== &drv_data->cur_msg->transfers)
+		drv_data->cur_transfer->cs_change = 1; /* last */
+
+
+	/* Setup the SPI Registers using the per chip configuration */
+	drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
+
+	/* Mark as busy and launch transfers */
+	tasklet_schedule(&drv_data->pump_transfers);
+
+	drv_data->busy = 1;
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+}
+
+/****************************************************************************/
+
+/*
+ * SPI master implementation
+ */
+
+static int transfer(struct spi_device *spi, struct spi_message *msg)
+{
+	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+	unsigned long flags;
+
+	DBG("\n");
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	if (drv_data->run == QUEUE_STOPPED) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return -ESHUTDOWN;
+	}
+
+	msg->actual_length = 0;
+	msg->status = -EINPROGRESS;
+	msg->state = START_STATE;
+
+	list_add_tail(&msg->queue, &drv_data->queue);
+
+	if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
+		queue_work(drv_data->workqueue, &drv_data->pump_messages);
+
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	return 0;
+}
+
+
+static int setup(struct spi_device *spi)
+{
+
+	struct chip_data *chip;
+	struct coldfire_dspi_chip *chip_info
+		= (struct coldfire_dspi_chip *)spi->controller_data;
+	DBG("\n");
+
+	/* Only alloc on first setup */
+	chip = spi_get_ctldata(spi);
+	if (chip == NULL) {
+		chip = kcalloc(1, sizeof(struct chip_data), GFP_KERNEL);
+		if (!chip)
+			return -ENOMEM;
+		spi->mode = chip_info->mode;
+		spi->bits_per_word = chip_info->bits_per_word;
+	}
+
+	chip->mcr.master = 1;
+	chip->mcr.cont_scke = 0;
+	chip->mcr.dconf = 0;
+	chip->mcr.frz = 0;
+	chip->mcr.mtfe = 0;
+	chip->mcr.pcsse = 0;
+	chip->mcr.rooe = 0;
+	chip->mcr.pcsis = 0xFF;
+	chip->mcr.reserved15 = 0;
+	chip->mcr.mdis = 0;
+	chip->mcr.dis_tx = 0;
+	chip->mcr.dis_rxf = 0;
+	chip->mcr.clr_tx = 1;
+	chip->mcr.clr_rxf = 1;
+	chip->mcr.smpl_pt = 0;
+	chip->mcr.reserved71 = 0;
+	chip->mcr.halt = 0;
+
+	if ((spi->bits_per_word >= 4) && (spi->bits_per_word <= 16)) {
+		chip->ctar.fmsz = spi->bits_per_word-1;
+	} else {
+		printk(KERN_ERR "Invalid wordsize\n");
+		kfree(chip);
+		return -ENODEV;
+	}
+
+	chip->void_write_data = chip_info->void_write_data;
+
+	if (spi->max_speed_hz != 0)
+		chip_info->br = hz_to_spi_baud(chip_info->pbr, chip_info->dbr, \
+					       spi->max_speed_hz);
+
+	chip->ctar.cpha = (spi->mode & SPI_CPHA) ? 1 : 0;
+	chip->ctar.cpol = (spi->mode & SPI_CPOL) ? 1 : 0;
+	chip->ctar.lsbfe = (spi->mode & SPI_LSB_FIRST) ? 1 : 0;
+	chip->ctar.dbr = chip_info->dbr;
+	chip->ctar.pbr = chip_info->pbr;
+	chip->ctar.br = chip_info->br;
+	chip->ctar.pcssck = chip_info->pcssck;
+	chip->ctar.pasc = chip_info->pasc;
+	chip->ctar.pdt = chip_info->pdt;
+	chip->ctar.cssck = chip_info->cssck;
+	chip->ctar.asc = chip_info->asc;
+	chip->ctar.dt = chip_info->dt;
+
+	spi_set_ctldata(spi, chip);
+
+	return 0;
+}
+
+static int init_queue(struct driver_data *drv_data)
+{
+	INIT_LIST_HEAD(&drv_data->queue);
+	spin_lock_init(&drv_data->lock);
+
+	drv_data->run = QUEUE_STOPPED;
+	drv_data->busy = 0;
+
+	tasklet_init(&drv_data->pump_transfers,
+			pump_transfers,	(unsigned long)drv_data);
+
+	INIT_WORK(&drv_data->pump_messages, pump_messages);
+
+	drv_data->workqueue = create_singlethread_workqueue(
+					drv_data->master->dev.parent->bus_id);
+	if (drv_data->workqueue == NULL)
+		return -EBUSY;
+
+	return 0;
+}
+
+static int start_queue(struct driver_data *drv_data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return -EBUSY;
+	}
+
+	drv_data->run = QUEUE_RUNNING;
+	drv_data->cur_msg = NULL;
+	drv_data->cur_transfer = NULL;
+	drv_data->cur_chip = NULL;
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	queue_work(drv_data->workqueue, &drv_data->pump_messages);
+
+	return 0;
+}
+
+static int stop_queue(struct driver_data *drv_data)
+{
+	unsigned long flags;
+	unsigned limit = 500;
+	int status = 0;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	/* This is a bit lame, but is optimized for the common execution path.
+	 * A wait_queue on the drv_data->busy could be used, but then the common
+	 * execution path (pump_messages) would be required to call wake_up or
+	 * friends on every SPI message. Do this instead */
+	drv_data->run = QUEUE_STOPPED;
+	while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		msleep(10);
+		spin_lock_irqsave(&drv_data->lock, flags);
+	}
+
+	if (!list_empty(&drv_data->queue) || drv_data->busy)
+		status = -EBUSY;
+
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	return status;
+}
+
+static int destroy_queue(struct driver_data *drv_data)
+{
+	int status;
+
+	status = stop_queue(drv_data);
+	if (status != 0)
+		return status;
+
+	destroy_workqueue(drv_data->workqueue);
+
+	return 0;
+}
+
+
+static void cleanup(struct spi_device *spi)
+{
+	struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
+
+	dev_dbg(&spi->dev, "spi_device %u.%u cleanup\n",
+		spi->master->bus_num, spi->chip_select);
+
+	kfree(chip);
+}
+
+
+/****************************************************************************/
+
+/*
+ * Generic Device driver routines and interface implementation
+ */
+
+static int coldfire_spi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct coldfire_spi_master *platform_info;
+	struct spi_master *master;
+	struct driver_data *drv_data = 0;
+	struct resource *memory_resource;
+	int irq;
+	int status = 0;
+	int i;
+#if defined(SPI_DSPI_EDMA)
+	dma_addr_t dma_handle;
+#endif
+
+	platform_info = (struct coldfire_spi_master *)dev->platform_data;
+
+	master = spi_alloc_master(dev, sizeof(struct driver_data));
+	if (!master)
+		return -ENOMEM;
+
+ 	drv_data = spi_master_get_devdata(master);
+ 	drv_data->master = master;
+
+	INIT_LIST_HEAD(&drv_data->queue);
+	spin_lock_init(&drv_data->lock);
+
+	master->bus_num = platform_info->bus_num;
+	master->num_chipselect = platform_info->num_chipselect;
+	master->cleanup = cleanup;
+	master->setup = setup;
+	master->transfer = transfer;
+
+	drv_data->cs_control = platform_info->cs_control;
+	if (drv_data->cs_control)
+		for (i = 0; i < master->num_chipselect; i++)
+			drv_data->cs_control(i, QSPI_CS_INIT | QSPI_CS_DROP);
+
+	/* Setup register addresses */
+	memory_resource = platform_get_resource_byname(pdev,
+				IORESOURCE_MEM, "spi-module");
+	if (!memory_resource) {
+		dev_dbg(dev, "can not find platform module memory\n");
+		goto out_error_master_alloc;
+	}
+
+#if defined(SPI_DSPI_EDMA)
+	drv_data->edma_tx_buf = dma_alloc_coherent(NULL, EDMA_BUFSIZE_KMALLOC, \
+						   &dma_handle, GFP_DMA);
+	if (!drv_data->edma_tx_buf) {
+		dev_dbg(dev, "cannot allocate eDMA TX memory\n");
+		goto out_error_master_alloc;
+	}
+	drv_data->edma_rx_buf = dma_alloc_coherent(NULL, EDMA_BUFSIZE_KMALLOC, \
+						   &dma_handle, GFP_DMA);
+	if (!drv_data->edma_rx_buf) {
+		dma_free_coherent(NULL, EDMA_BUFSIZE_KMALLOC, \
+				  drv_data->edma_tx_buf, dma_handle);
+		kfree(drv_data->edma_tx_buf);
+		dev_dbg(dev, "cannot allocate eDMA RX memory\n");
+		goto out_error_master_alloc;
+	}
+#endif
+
+	drv_data->mcr = (void *)&MCF_DSPI_DMCR;
+	drv_data->ctar = (void *)&MCF_DSPI_DCTAR0;
+	drv_data->dspi_sr = (void *)&MCF_DSPI_DSR;
+	drv_data->dspi_rser = (void *)&MCF_DSPI_DRSER;
+	drv_data->dspi_dtfr = (void *)&MCF_DSPI_DTFR;
+	drv_data->dspi_drfr = (void *)&MCF_DSPI_DRFR;
+
+	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						       "spi-par");
+	if (!memory_resource) {
+		dev_dbg(dev, "No spi-par memory\n");
+		goto out_error_master_alloc;
+	}
+	drv_data->par = (void *)memory_resource->start;
+
+	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						       "spi-int-level");
+	if (!memory_resource) {
+		dev_dbg(dev, "No spi-int-level memory\n");
+		goto out_error_master_alloc;
+	}
+	drv_data->int_icr = (void *)memory_resource->start;
+
+	memory_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						       "spi-int-mask");
+	if (!memory_resource) {
+		dev_dbg(dev, "No spi-int-mask memory\n");
+		goto out_error_master_alloc;
+	}
+	drv_data->int_mr = (void *)memory_resource->start;
+
+	if (platform_info->irq_list) {
+		/* multiple IRQs */
+		int *irqlist = platform_info->irq_list;
+		while ((irq = *irqlist++)) {
+			int off = *irqlist++;
+			int lvl = *irqlist++;
+			int msk = *irqlist++;
+			status = request_irq(irq, dspi_interrupt, IRQF_DISABLED,
+					     dev->bus_id, drv_data);
+			if (status < 0) {
+				dev_err(&pdev->dev, 
+					"Unable to attach ColdFire DSPI interrupt\n");
+				goto out_error_master_alloc;
+			}
+
+			if (lvl)
+				*(drv_data->int_icr + off) = lvl;
+
+			if (msk)
+				*drv_data->int_mr &= ~msk;
+		}
+	}
+	else {
+		irq = platform_info->irq_vector;
+
+		status = request_irq(platform_info->irq_vector, dspi_interrupt,
+				     IRQF_DISABLED, dev->bus_id, drv_data);
+		if (status < 0) {
+			dev_err(&pdev->dev, "Unable to attach ColdFire DSPI interrupt\n");
+			goto out_error_master_alloc;
+		}
+
+		*drv_data->int_icr = platform_info->irq_lp;
+		*drv_data->int_mr &= ~platform_info->irq_mask;
+	}
+
+	/* Now that we have all the addresses etc.  Let's set it up */
+	if (platform_info->par_val)
+		*drv_data->par = platform_info->par_val;
+
+	/* Initial and start queue */
+	status = init_queue(drv_data);
+	if (status != 0) {
+		dev_err(&pdev->dev, "Problem initializing DSPI queue\n");
+		goto out_error_irq_alloc;
+	}
+	status = start_queue(drv_data);
+	if (status != 0) {
+		dev_err(&pdev->dev, "Problem starting DSPI queue\n");
+		goto out_error_irq_alloc;
+	}
+
+	/* Register with the SPI framework */
+	platform_set_drvdata(pdev, drv_data);
+	status = spi_register_master(master);
+	if (status != 0) {
+		dev_err(&pdev->dev, "Problem registering DSPI master\n");
+		status = -EINVAL;
+		goto out_error_queue_alloc;
+	}
+
+#if defined(SPI_DSPI_EDMA)
+	if (mcf_edma_request_channel(DSPI_DMA_TX_TCD,
+				     edma_tx_handler,
+				     NULL,
+				     0x0,
+				     pdev,
+				     NULL, /* spinlock */
+				     DRIVER_NAME) < 0){
+		dev_err(&pdev->dev, "eDMA transmit channel request\n");
+		status = -EINVAL;
+		goto out_error_queue_alloc;
+	}
+
+	if (mcf_edma_request_channel(DSPI_DMA_RX_TCD,
+				     edma_rx_handler,
+				     NULL,
+				     0x0,
+				     pdev,
+				     NULL, /* spinlock */
+				     DRIVER_NAME) < 0){
+		dev_err(&pdev->dev, "eDAM receive channel request\n");
+		status = -EINVAL;
+		mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev);
+		goto out_error_queue_alloc;
+	}
+#endif
+
+	printk(KERN_INFO "DSPI: Coldfire master initialized\n");
+	return status;
+
+out_error_queue_alloc:
+	destroy_queue(drv_data);
+
+out_error_irq_alloc:
+	free_irq(platform_info->irq_vector, drv_data);
+
+out_error_master_alloc:
+	spi_master_put(master);
+	return status;
+
+}
+
+static int coldfire_spi_remove(struct platform_device *pdev)
+{
+	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	int irq;
+	int status = 0;
+
+	if (!drv_data)
+		return 0;
+
+#if defined(SPI_DSPI_EDMA)
+	mcf_edma_free_channel(DSPI_DMA_TX_TCD, pdev);
+	mcf_edma_free_channel(DSPI_DMA_RX_TCD, pdev);
+#endif
+
+	/* Remove the queue */
+	status = destroy_queue(drv_data);
+	if (status != 0)
+		return status;
+
+	/* Release IRQ */
+	irq = platform_get_irq(pdev, 0);
+	if (irq >= 0)
+		free_irq(irq, drv_data);
+
+	/* Disconnect from the SPI framework */
+	spi_unregister_master(drv_data->master);
+
+	/* Prevent double remove */
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static void coldfire_spi_shutdown(struct platform_device *pdev)
+{
+	int status = coldfire_spi_remove(pdev);
+
+	if (status != 0)
+		dev_err(&pdev->dev, "shutdown failed with %d\n", status);
+}
+
+
+#ifdef CONFIG_PM
+static int suspend_devices(struct device *dev, void *pm_message)
+{
+	pm_message_t *state = pm_message;
+
+	if (dev->power.power_state.event != state->event) {
+		dev_warn(dev, "pm state does not match request\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int coldfire_spi_suspend(struct platform_device *pdev,
+				pm_message_t state)
+{
+	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	int status = 0;
+
+	/* Check all childern for current power state */
+	if (device_for_each_child(&pdev->dev,
+		&state, suspend_devices) != 0) {
+		dev_warn(&pdev->dev, "suspend aborted\n");
+		return -1;
+	}
+
+	status = stop_queue(drv_data);
+	if (status != 0)
+		return status;
+
+	return 0;
+}
+
+static int coldfire_spi_resume(struct platform_device *pdev)
+{
+	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	int status = 0;
+
+	/* Start the queue running */
+	status = start_queue(drv_data);
+	if (status != 0) {
+		dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
+		return status;
+	}
+
+	return 0;
+}
+#else
+#define coldfire_spi_suspend NULL
+#define coldfire_spi_resume NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver driver = {
+	.driver = {
+		.name = "spi_coldfire",
+		.bus = &platform_bus_type,
+		.owner = THIS_MODULE,
+	},
+	.probe = coldfire_spi_probe,
+	.remove = __devexit_p(coldfire_spi_remove),
+	.shutdown = coldfire_spi_shutdown,
+	.suspend = coldfire_spi_suspend,
+	.resume = coldfire_spi_resume,
+};
+
+static int __init coldfire_spi_init(void)
+{
+	platform_driver_register(&driver);
+
+	return 0;
+}
+module_init(coldfire_spi_init);
+
+static void __exit coldfire_spi_exit(void)
+{
+	platform_driver_unregister(&driver);
+}
+module_exit(coldfire_spi_exit);
+
+MODULE_AUTHOR("Matt Waddel");
+MODULE_DESCRIPTION("ColdFire DSPI Contoller");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/include/asm-m68k/mcfdspi.h
@@ -0,0 +1,48 @@
+/*
+ * mcfdspi.h-DSPI controller for the ColdFire processors.
+ *
+ * Andrey Butok
+ * Copyright Freescale Semiconductor, Inc. 2008
+ *
+ *    This file is based on mcfqspi.h
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ ***************************************************************************
+ * Changes:
+ *   v0.001	25 March 2008		Andrey Butok
+ *   		Initial Release - developed on uClinux with 2.6.23 kernel.
+ *
+ */
+
+#ifndef MCFDSPI_H_
+#define MCFDSPI_H_
+
+struct coldfire_dspi_chip {
+	u8 mode;
+	u8 bits_per_word;
+	u16 void_write_data;
+	/* Only used in master mode */
+	u8 dbr;		/* Double baud rate */
+	u8 pbr;		/* Baud rate prescaler */
+	u8 br;		/* Baud rate scaler */
+	u8 pcssck;	/* PCS to SCK delay prescaler */
+	u8 pasc;	/* After SCK delay prescaler */
+	u8 pdt;		/* Delay after transfer prescaler */
+	u8 cssck;	/* PCS to SCK delay scaler */
+	u8 asc;		/* After SCK delay scaler */
+	u8 dt;		/* Delay after transfer scaler */
+};
+#endif /*MCFDSPI_H_*/