path: root/target/linux/coldfire/patches/040-Add-USB-support-for-MCF5445x-and-MCF54418.patch

From 632dc9e46a9ff032138f81fd420c0f01fd6c3cbc Mon Sep 17 00:00:00 2001
From: Jason Jin <Jason.jin@freescale.com>
Date: Thu, 4 Aug 2011 14:21:29 +0800
Subject: [PATCH 40/52] Add USB support for MCF5445x and MCF54418

The OTG module function with external ULPI of USB3300
on M5445xEVB and Modelo TWR-SER2, while the Max3353 charge
pump on Modelo TWR-SER1 with version-B CPU board only
function FS/LS tranceiver.
It also support USB host module on Modelo TWR-SER2.
And the host mode on M54455EVB with FS/LS only tranceiver
is supported by p4 interface on the board.

Signed-off-by: Jingchang Lu <b35083@freescale.com>
---
 arch/m68k/Kconfig                        |    2 +
 arch/m68k/coldfire/m5441x/Makefile       |    4 +-
 arch/m68k/coldfire/m5441x/max3353.h      |   96 +++
 arch/m68k/coldfire/m5441x/max3353_otg.c  |  508 +++++++++++++
 arch/m68k/coldfire/m5441x/max3353_xc.c   |  310 ++++++++
 arch/m68k/coldfire/m5441x/usb.c          |  276 +++++++
 arch/m68k/coldfire/m5441x/usb.h          |   76 ++
 arch/m68k/coldfire/m5441x/usb_dr.c       |  179 +++++
 arch/m68k/coldfire/m5441x/usb_host.c     |  115 +++
 arch/m68k/coldfire/m5441x/xcvr.c         |  198 +++++
 arch/m68k/coldfire/m5441x/xcvr_host.c    |   53 ++
 arch/m68k/coldfire/m5445x/usb.c          |  220 ++++++
 arch/m68k/coldfire/m5445x/usb.h          |  107 +++
 arch/m68k/coldfire/m5445x/usb_dr.c       |  152 ++++
 arch/m68k/coldfire/m5445x/xcvr.c         |  127 ++++
 arch/m68k/include/asm/fsl_usb_gadget.h   |   45 ++
 arch/m68k/include/asm/fsl_usb_io.h       |   43 ++
 arch/m68k/include/asm/fsl_usb_platform.h |   78 ++
 drivers/Makefile                         |    1 +
 drivers/usb/Kconfig                      |    2 +
 drivers/usb/core/Kconfig                 |    2 +-
 drivers/usb/gadget/Kconfig               |    2 +-
 drivers/usb/gadget/fsl_udc_core.c        |  360 ++++++++-
 drivers/usb/gadget/fsl_usb2_udc.h        |   16 +
 drivers/usb/gadget/serial.c              |   40 +-
 drivers/usb/host/Kconfig                 |   72 ++-
 drivers/usb/host/ehci-fsl.c              |  257 ++++++-
 drivers/usb/host/ehci-fsl.h              |    7 +
 drivers/usb/host/ehci-hub.c              |   34 +
 drivers/usb/host/ehci.h                  |   55 ++-
 drivers/usb/otg/Makefile                 |    7 +
 drivers/usb/otg/fsl_otg.c                | 1212 ++++++++++++++++++++++++++++++
 drivers/usb/otg/fsl_otg.h                |  423 +++++++++++
 drivers/usb/otg/otg_fsm.c                |  371 +++++++++
 drivers/usb/otg/otg_fsm.h                |  151 ++++
 drivers/usb/otg/usb.c                    |   76 ++
 include/linux/fsl_devices.h              |   26 +
 include/linux/usb/fsl_usb2.h             |  410 ++++++++++
 include/linux/usb/fsl_xcvr.h             |   36 +
 include/linux/usb/otg.h                  |    2 +-
 40 files changed, 6087 insertions(+), 64 deletions(-)
 create mode 100644 arch/m68k/coldfire/m5441x/max3353.h
 create mode 100644 arch/m68k/coldfire/m5441x/max3353_otg.c
 create mode 100644 arch/m68k/coldfire/m5441x/max3353_xc.c
 create mode 100644 arch/m68k/coldfire/m5441x/usb.c
 create mode 100644 arch/m68k/coldfire/m5441x/usb.h
 create mode 100644 arch/m68k/coldfire/m5441x/usb_dr.c
 create mode 100644 arch/m68k/coldfire/m5441x/usb_host.c
 create mode 100644 arch/m68k/coldfire/m5441x/xcvr.c
 create mode 100644 arch/m68k/coldfire/m5441x/xcvr_host.c
 create mode 100644 arch/m68k/coldfire/m5445x/usb.c
 create mode 100644 arch/m68k/coldfire/m5445x/usb.h
 create mode 100644 arch/m68k/coldfire/m5445x/usb_dr.c
 create mode 100644 arch/m68k/coldfire/m5445x/xcvr.c
 create mode 100644 arch/m68k/include/asm/fsl_usb_gadget.h
 create mode 100644 arch/m68k/include/asm/fsl_usb_io.h
 create mode 100644 arch/m68k/include/asm/fsl_usb_platform.h
 create mode 100644 drivers/usb/otg/fsl_otg.c
 create mode 100644 drivers/usb/otg/fsl_otg.h
 create mode 100644 drivers/usb/otg/otg_fsm.c
 create mode 100644 drivers/usb/otg/otg_fsm.h
 create mode 100644 drivers/usb/otg/usb.c
 create mode 100644 include/linux/usb/fsl_usb2.h
 create mode 100644 include/linux/usb/fsl_xcvr.h

--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -327,6 +327,7 @@ config M5445X
 	bool "MCF5445x support"
 	depends on COLDFIRE
 	select GENERIC_TIME
+	select USB_ARCH_HAS_EHCI
 	select USB_EHCI_FSL
 	select HAVE_FSL_USB_DR
 	help
@@ -430,6 +431,7 @@ config M5441X
 	depends on COLDFIRE
 	select GENERIC_TIME
 	select USB_EHCI_FSL
+	select USB_ARCH_HAS_EHCI
 	select HAVE_FSL_USB_DR
 	select HAVE_CAN_FLEXCAN
 	help
--- a/arch/m68k/coldfire/m5441x/Makefile
+++ b/arch/m68k/coldfire/m5441x/Makefile
@@ -14,9 +14,11 @@ endif
 endif
 
 #ifneq ($(strip $(CONFIG_USB) $(CONFIG_USB_GADGET_FSL_USB2)),)
-ifneq ($(strip $(CONFIG_USB_OTG) $(CONFIG_USB_M5441X_MAX3353_FSLS)),)
+ifneq ($(strip $(CONFIG_USB_OTG)),)
+ifeq ($(strip $(CONFIG_USB_M5441X_MAX3353_FSLS)),)
 	obj-y   += xcvr.o
 endif
+endif
 ifneq ($(strip $(CONFIG_USB_M5441X_MAX3353_FSLS)), )
 	obj-y += max3353_xc.o
 ifneq ($(strip $(CONFIG_USB_OTG)),)
--- /dev/null
+++ b/arch/m68k/coldfire/m5441x/max3353.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _MAX3353_H_
+#define _MAX3353_H_
+/* registers */
+
+/* Manufacturer registers */
+#define MAX3353_MAN0		0x00
+#define MAX3353_MAN1		0x01
+#define MAX3353_MAN2		0x02
+#define MAX3353_MAN3		0x03
+
+/* Product ID registers */
+#define MAX3353_PID0		0x04
+#define MAX3353_PID1		0x05
+#define MAX3353_PID2		0x06
+#define MAX3353_PID3		0x07
+
+/* Control register 1 */
+#define MAX3353_CR1		0x10
+#define CR1_DM_PULLDOWN		(1 << 7)
+#define CR1_DP_PULLDOWN		(1 << 6)
+#define CR1_DM_PULLUP		(1 << 5)
+#define CR1_DP_PULLUP		(1 << 4)
+#define CR1_BDISC_ACONN		(1 << 2)
+#define CR1_IRQ_PUSH_PULL	(1 << 1)
+
+/* Control register 2 */
+#define MAX3353_CR2		0x11
+#define CR2_VBUS_DISCHRG	(1 << 4)
+#define CR2_VBUS_DRV		(1 << 3)
+#define CR2_VBUS_CHG2		(1 << 2)
+#define CR2_VBUS_CHG1		(1 << 1)
+#define CR2_SHUTDOWN		(1 << 0)
+
+/* Status register */
+#define MAX3353_STATUS		0x13
+#define STATUS_B_HNP		(1 << 6)
+#define STATUS_A_HNP		(1 << 5)
+#define STATUS_ID_FLOAT		(1 << 4)
+#define STATUS_ID_GND		(1 << 3)
+#define STATUS_SESSION_END	(1 << 2)
+#define STATUS_SESSION_VALID	(1 << 1)
+#define STATUS_VBUS_VALID	(1 << 0)
+
+/* Interrupt mask register */
+#define MAX3353_INTR_MASK	0x14
+#define IM_A_HNP_EN		(1 << 5)
+#define IM_ID_FLOAT_EN		(1 << 4)
+#define IM_ID_GND_EN		(1 << 3)
+#define IM_SESSION_END_EN	(1 << 2)
+#define IM_SESSION_VLD_EN	(1 << 1)
+#define IM_VBUS_VLD_EN		(1 << 0)
+
+/* Interrupt edge register */
+#define MAX3353_INTR_EDGE	0x15
+#define IE_SESSION_VALID_ED	(1 << 1)
+#define IE_VBUS_VLD_ED		(1 << 0)
+
+/* Interrupt latch register (read-only) */
+#define MAX3353_INTR_LATCH	0x16
+#define IL_A_HNP_RQ		(1 << 7)
+#define IL_ID_FLOAT_RQ		(1 << 6)
+#define IL_ID_GND_RQ		(1 << 5)
+#define IL_SESSION_END_RQ	(1 << 4)
+#define IL_SESSION_VALID_RN	(1 << 3)
+#define IL_VBUS_VALID_RN	(1 << 2)
+#define IL_SESSION_VALID_RP	(1 << 1)
+#define IL_VBUS_VALID_RP	(1 << 0)
+
+
+#define MAX3353_DEV_ADDR	0x2c
+#define MAX3353_IRQ		(64 + 4) /* IRQ4 */
+
+extern u8 max3353_read_reg(u8 reg);
+extern void max3353_write_reg(u8 reg, u8 data);
+extern int max3353_read_id_pin(void);
+extern int otg_set_resources(struct resource *resources);
+
+#endif /* _MAX3353_H_ */
--- /dev/null
+++ b/arch/m68k/coldfire/m5441x/max3353_otg.c
@@ -0,0 +1,508 @@
+/*
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/moduleparam.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/usb.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/workqueue.h>
+#include <linux/time.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+#include <linux/usb/fsl_usb2.h>
+#include <linux/usb/otg.h>
+
+#include <asm/fsl_usb_io.h>
+#include "max3353.h"
+
+#define DRIVER_VERSION "1.0"
+#define DRIVER_AUTHOR "Freescale Semiconductor Inc."
+#define DRIVER_DESC "Freescale MAX3353 USBOTG Driver"
+#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
+
+MODULE_DESCRIPTION("Freescale MAX3353 USBOTG Driver");
+
+#if 0
+#undef pr_debug
+#define pr_debug(x...) printk(x)
+#endif
+
+static const char driver_name[] = "max3353-otg";
+
+const pm_message_t otg_suspend_state = {
+	.event = 1,
+};
+
+static volatile struct fsl_usb_device_regs *usb_dr_regs;
+
+struct otg_fsm {
+	int id;		/* 0=host  1=gadget */
+	struct otg_fsm_ops *ops;
+	struct otg_transceiver *transceiver;
+};
+
+struct otg_fsm_ops {
+	int (*start_host)(struct otg_fsm *fsm, int on);
+	int (*start_gadget)(struct otg_fsm *fsm, int on);
+};
+
+struct max_otg {
+	struct otg_transceiver otg;
+	struct otg_fsm fsm;
+	struct delayed_work otg_event;
+	struct work_struct work_wq;
+	u8 host_working;
+	int irq;
+};
+
+static struct max_otg *max_otg_dev;
+
+#define SET_OTG_STATE(otg_ptr, newstate)	((otg_ptr)->state = newstate)
+
+
+/* Reset controller, not reset the bus */
+void otg_reset_controller(void)
+{
+	u32 command;
+
+	command = fsl_readl(&usb_dr_regs->usbcmd);
+	command |= (1 << 1);
+	fsl_writel(command, &usb_dr_regs->usbcmd);
+	while (fsl_readl(&usb_dr_regs->usbcmd) & (1 << 1))
+		;
+}
+
+
+/* Call suspend/resume routines in host driver */
+static int maxotg_start_host(struct otg_fsm *fsm, int on)
+{
+	struct otg_transceiver *xceiv = fsm->transceiver;
+	struct device *dev;
+	struct max_otg *otg_dev = container_of(xceiv, struct max_otg, otg);
+	u32 retval = 0;
+
+	pr_debug("%s: host %s\n", __func__, on ? "on" : "off");
+
+	if (!xceiv->host)
+		return -ENODEV;
+	dev = xceiv->host->controller;
+
+	if (on) {
+		/* start fsl usb host controller */
+		if (otg_dev->host_working)
+			goto end;
+		else {
+			otg_reset_controller();
+			pr_debug("host on......\n");
+			if (dev->driver->resume)
+				retval = dev->driver->resume(dev);
+
+			otg_dev->host_working = 1;
+		}
+	} else {
+		/* stop fsl usb host controller */
+		if (!otg_dev->host_working)
+			goto end;
+		else {
+			pr_debug("host off......\n");
+			if (dev && dev->driver)
+				retval = dev->driver->suspend(dev,
+						otg_suspend_state);
+			otg_dev->host_working = 0;
+		}
+	}
+end:
+	return retval;
+}
+
+/* Call suspend and resume function in udc driver
+ * to stop and start udc driver.
+ */
+static int maxotg_start_gadget(struct otg_fsm *fsm, int on)
+{
+	struct otg_transceiver *xceiv = fsm->transceiver;
+	struct device *dev;
+
+	pr_debug("%s: gadget %s\n", __func__, on ? "on" : "off");
+
+	if (!xceiv->gadget || !xceiv->gadget->dev.parent)
+		return -ENODEV;
+
+	dev = xceiv->gadget->dev.parent;
+
+	if (on)
+		dev->driver->resume(dev);
+	else
+		dev->driver->suspend(dev, otg_suspend_state);
+
+	return 0;
+}
+
+
+/* delayed interrupt handler */
+static void handle_irq(struct work_struct *work)
+{
+	u8 latch;
+	int id_host;
+	struct otg_fsm *fsm = &max_otg_dev->fsm;
+	struct otg_transceiver *otg = &max_otg_dev->otg;
+
+	if (max_otg_dev == NULL)
+		return;
+
+	latch  = max3353_read_reg(MAX3353_INTR_LATCH);
+
+	if (latch) {
+		id_host = max3353_read_id_pin();
+		fsm->id = !id_host;
+		pr_debug("\t\t\t%s host mode %s\n", __func__,
+			id_host ? "ON" : "OFF");
+
+		if (otg->host)
+			otg->host->is_b_host = fsm->id;
+		if (otg->gadget)
+			otg->gadget->is_a_peripheral = !fsm->id;
+
+		if (fsm->id) {	/* switch to gadget */
+			schedule_delayed_work(&max_otg_dev->otg_event, 100);
+		} else {	/* switch to host */
+			cancel_delayed_work(&max_otg_dev->otg_event);
+			maxotg_start_gadget(fsm, 0);
+			maxotg_start_host(fsm, 1);
+		}
+	}
+	enable_irq(MAX3353_IRQ);
+}
+
+DECLARE_DELAYED_WORK(max3353_dwq, handle_irq);
+
+/*
+ * MAX3353 interrupt handler
+ *
+ * We're interested in ID pin changes.  Since we can't do i2c
+ * operations from interrupt context, we use a delayed workqueue
+ * routine to clear the interrupt in the MAX3353, and to handle
+ * the role switching.  The delay also allows for debouncing the
+ * state of the ID pin.  To avoid the flood of interrupts between
+ * the irq and its processing, we disable the irq here, and re-enable
+ * it in the delayed routine.
+ */
+irqreturn_t max3353_isr(int irq, void *dev_id)
+{
+	disable_irq(MAX3353_IRQ);
+	schedule_delayed_work(&max3353_dwq, 25);
+
+	return IRQ_HANDLED;
+}
+
+
+/* Called by initialization code of host driver.  Register host controller
+ * to the OTG.  Suspend host for OTG role detection.
+ */
+static int set_host(struct otg_transceiver *otg_p, struct usb_bus *host)
+{
+	struct max_otg *otg_dev = container_of(otg_p, struct max_otg, otg);
+
+	pr_debug("%s() host %p\n", __func__, host);
+
+	if (!otg_p || otg_dev != max_otg_dev)
+		return -ENODEV;
+
+	otg_p->host = host;
+	if (host) {
+		pr_debug("host off......\n");
+
+		/* must leave time for khubd to finish its thing
+		 * before yanking the host driver out from under it,
+		 * so suspend the host after a short delay.
+		 */
+		otg_dev->host_working = 1;
+		schedule_delayed_work(&otg_dev->otg_event, 100);
+		return 0;
+	} else {		/* host driver going away */
+		if (max3353_read_id_pin()) {
+			/* Mini-A cable connected */
+			otg_p->state = OTG_STATE_UNDEFINED;
+		}
+	}
+
+	otg_dev->host_working = 0;
+
+	return 0;
+}
+
+/* Called by initialization code of udc.  Register udc to OTG.*/
+static int set_peripheral(struct otg_transceiver *otg_p,
+				  struct usb_gadget *gadget)
+{
+	struct max_otg *otg_dev = container_of(otg_p, struct max_otg, otg);
+
+	pr_debug("%s gadget %p\n", __func__, gadget);
+
+	pr_debug("otg_dev 0x%x\n", (int)otg_dev);
+	pr_debug("max_otg_dev 0x%x\n", (int)max_otg_dev);
+
+	if (!otg_p || otg_dev != max_otg_dev)
+		return -ENODEV;
+
+	if (!gadget) {
+		if (!otg_dev->otg.default_a)
+			otg_p->gadget->ops->vbus_draw(otg_p->gadget, 0);
+		usb_gadget_vbus_disconnect(otg_dev->otg.gadget);
+		otg_dev->otg.gadget = 0;
+		return 0;
+	}
+
+	otg_p->gadget = gadget;
+	otg_p->gadget->is_a_peripheral = !otg_dev->fsm.id;
+
+	/* start the gadget right away if the ID pin says Mini-B */
+	pr_debug("ID pin=%d\n", otg_dev->fsm.id);
+	if (otg_dev->fsm.id == 1) {
+		maxotg_start_host(&otg_dev->fsm, 0);
+		maxotg_start_gadget(&otg_dev->fsm, 1);
+	}
+
+	return 0;
+}
+
+/* Set OTG port power, only for B-device */
+static int set_power(struct otg_transceiver *otg_p, unsigned mA)
+{
+	return 0;
+}
+
+/* Delayed pin detect interrupt processing.
+ *
+ * When the Mini-A cable is disconnected from the board,
+ * the pin-detect interrupt happens before the disconnnect
+ * interrupts for the connected device(s).  In order to
+ * process the disconnect interrupt(s) prior to switching
+ * roles, the pin-detect interrupts are delayed, and handled
+ * by this routine.
+ */
+static void maxotg_event(struct work_struct *work)
+{
+	struct max_otg *og = container_of(work, struct max_otg, otg_event.work);
+	struct otg_fsm *fsm = &og->fsm;
+
+	if (fsm->id) {		/* switch to gadget */
+		maxotg_start_host(fsm, 0);
+		maxotg_start_gadget(fsm, 1);
+	}
+}
+
+
+static struct otg_fsm_ops maxotg_ops = {
+	.start_host = maxotg_start_host,
+	.start_gadget = maxotg_start_gadget,
+};
+
+
+/* Initialize the global variable max_otg_dev and request IRQ for OTG */
+static int maxotg_conf(struct platform_device *pdev)
+{
+	int status;
+	struct max_otg *max_otg_tc;
+	struct fsl_usb2_platform_data *pdata;
+
+	pdata = pdev->dev.platform_data;
+
+	pr_debug("%s\n", __func__);
+
+	if (max_otg_dev)
+		return 0;
+
+	/* allocate space to fsl otg device */
+	max_otg_tc = kzalloc(sizeof(struct max_otg), GFP_KERNEL);
+	if (!max_otg_tc)
+		return -ENODEV;
+
+	INIT_DELAYED_WORK(&max_otg_tc->otg_event, maxotg_event);
+
+	/* Set OTG state machine operations */
+	max_otg_tc->fsm.ops = &maxotg_ops;
+
+	/* initialize the otg structure */
+	max_otg_tc->otg.label = DRIVER_DESC;
+	max_otg_tc->otg.set_host = set_host;
+	max_otg_tc->otg.set_peripheral = set_peripheral;
+	max_otg_tc->otg.set_power = set_power;
+
+	max_otg_dev = max_otg_tc;
+	pr_debug("%s: set max_otg_dev %p,  fsm %p\n", __func__,
+		max_otg_dev, &max_otg_dev->fsm);
+
+	/* Store the otg transceiver */
+	status = otg_set_transceiver(&max_otg_tc->otg);
+	if (status) {
+		printk(KERN_WARNING ": unable to register OTG transceiver.\n");
+		return status;
+	}
+
+	return 0;
+}
+
+/* OTG Initialization*/
+static int maxotg_start(struct platform_device *pdev)
+{
+	struct max_otg *p_otg;
+	struct otg_transceiver *otg_trans = otg_get_transceiver();
+	struct otg_fsm *fsm;
+	int status;
+	struct resource *res;
+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
+
+	p_otg = container_of(otg_trans, struct max_otg, otg);
+	fsm = &p_otg->fsm;
+
+	/* Initialize the state machine structure with default values */
+	SET_OTG_STATE(otg_trans, OTG_STATE_UNDEFINED);
+	fsm->transceiver = &p_otg->otg;
+
+	/* We don't require predefined MEM/IRQ resource index */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENXIO;
+
+	/*
+	 * We don't request_mem_region here to enable resource sharing
+	 * with host/device
+	 */
+	usb_dr_regs = ioremap(res->start, sizeof(struct fsl_usb_device_regs));
+	pdata->regs = (void *)usb_dr_regs;
+	pr_debug("ioremap %x to %p\n", res->start, pdata->regs);
+
+	if (pdata->init && pdata->init(pdev) != 0)
+		return -EINVAL;
+
+	/* grab the irq */
+	status = request_irq(MAX3353_IRQ, max3353_isr, IRQF_DISABLED,
+			     driver_name, p_otg);
+	if (status) {
+		printk(KERN_ERR "max3353: can't get IRQ, rc %d\n", status);
+		return -EINVAL;
+	}
+
+	/* enable interrupts on the part */
+	pr_debug("%s: enabling MAX3353 interrupts\n", __func__);
+	max3353_write_reg(MAX3353_INTR_MASK, IM_ID_GND_EN | IM_ID_FLOAT_EN);
+
+	/* Export DR controller resources */
+	otg_set_resources(pdev->resource);
+
+	/* record initial state of ID pin */
+	p_otg->fsm.id = !max3353_read_id_pin();
+	if (p_otg->fsm.id)
+		p_otg->otg.state = OTG_STATE_UNDEFINED;
+	else
+		p_otg->otg.state = OTG_STATE_A_IDLE;
+
+	pr_debug("initial ID pin: fsm.id=%d (%s)\n", p_otg->fsm.id,
+		 p_otg->fsm.id ? "gadget" : "host");
+
+	return 0;
+}
+
+static int __init maxotg_probe(struct platform_device *pdev)
+{
+	int status;
+	struct fsl_usb2_platform_data *pdata;
+
+	pr_debug("%s: pdev=0x%p\n", __func__, pdev);
+
+	if (!pdev)
+		return -ENODEV;
+
+	if (!pdev->dev.platform_data)
+		return -ENOMEM;
+
+	pdata = pdev->dev.platform_data;
+	fsl_set_usb_accessors(pdata);
+
+	/* configure the OTG */
+	status = maxotg_conf(pdev);
+	if (status) {
+		printk(KERN_INFO "Couldn't init OTG module\n");
+		return -status;
+	}
+
+	/* start OTG */
+	status = maxotg_start(pdev);
+
+	return status;
+}
+
+static int __exit maxotg_remove(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
+
+	/* disable max3353 interrupts */
+	max3353_write_reg(MAX3353_INTR_MASK, 0);
+
+	otg_set_transceiver(NULL);
+	free_irq(MAX3353_IRQ, max_otg_dev);
+
+	iounmap((void *)usb_dr_regs);
+
+	kfree(max_otg_dev);
+	max_otg_dev = NULL;
+
+	if (pdata->exit)
+		pdata->exit(pdev);
+
+	return 0;
+}
+
+struct platform_driver max3353_otg_driver = {
+	.probe = maxotg_probe,
+	.remove = __exit_p(maxotg_remove),
+	.driver = {
+		.name = driver_name,
+		.owner = THIS_MODULE,
+	},
+};
+
+
+static int __init maxotg_init(void)
+{
+	printk(KERN_INFO DRIVER_DESC " loaded, %s\n", DRIVER_VERSION);
+	return platform_driver_register(&max3353_otg_driver);
+}
+
+static void __exit maxotg_exit(void)
+{
+	platform_driver_unregister(&max3353_otg_driver);
+	printk(KERN_INFO DRIVER_DESC " unloaded\n");
+}
+
+module_init(maxotg_init);
+module_exit(maxotg_exit);
+
+MODULE_DESCRIPTION(DRIVER_INFO);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/arch/m68k/coldfire/m5441x/max3353_xc.c
@@ -0,0 +1,310 @@
+/*
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#define DEBUG
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/usb/fsl_xcvr.h>
+#include <asm/mcfsim.h>
+#include "max3353.h"
+
+#define DRIVER_DESC "Freescale MAX3353 Driver"
+
+static struct i2c_device_id max3353_id[] = {
+	{"max3353", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, max3353_id);
+
+struct max3353_state {
+	struct i2c_client *client;
+};
+
+static int max3353_probe(struct i2c_client *client,
+		const struct i2c_device_id *id);
+static int __devexit max3353_remove(struct i2c_client *client);
+
+static struct i2c_driver max3353_i2c_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "max3353",
+	},
+	.probe = max3353_probe,
+	.remove = __devexit_p(max3353_remove),
+	.id_table = max3353_id,
+};
+
+static struct i2c_client *max3353_i2c_client;
+
+/* Write a max3353 register*/
+void max3353_write_reg(u8 reg, u8 data)
+{
+	i2c_smbus_write_byte_data(max3353_i2c_client, reg, data);
+}
+EXPORT_SYMBOL(max3353_write_reg);
+
+/* Read a max3353 register*/
+u8 max3353_read_reg(u8 reg)
+{
+	return i2c_smbus_read_byte_data(max3353_i2c_client, reg);
+}
+EXPORT_SYMBOL(max3353_read_reg);
+
+/*
+ * max3353 I2C probe function
+ */
+
+static int max3353_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct max3353_state *state;
+	struct device *dev = &client->dev;
+
+	state = kzalloc(sizeof(struct max3353_state), GFP_KERNEL);
+	if (state == NULL) {
+		dev_err(dev, "failed to create our state\n");
+		return -ENOMEM;
+	}
+
+	state->client = client;
+	i2c_set_clientdata(client, state);
+
+	max3353_i2c_client = client;
+
+	/* rest of the initialisation goes here. */
+	printk(KERN_INFO "MAX3353 USB charge pump detected\n");
+	pr_debug("MANUF:%02x %02x %02x %02x   PID:%02x %02x %02x %02x\n",
+		max3353_read_reg(MAX3353_MAN0),
+		max3353_read_reg(MAX3353_MAN1),
+		max3353_read_reg(MAX3353_MAN2),
+		max3353_read_reg(MAX3353_MAN3),
+		max3353_read_reg(MAX3353_PID0),
+		max3353_read_reg(MAX3353_PID1),
+		max3353_read_reg(MAX3353_PID2),
+		max3353_read_reg(MAX3353_PID3));
+	pr_debug("%s done\n", __func__);
+
+	return 0;
+
+}
+
+/*
+ * max3353 I2C remove function
+ */
+static int __devexit max3353_remove(struct i2c_client *client)
+{
+	struct max3353_state *state = i2c_get_clientdata(client);
+
+	max3353_i2c_client = NULL;
+
+	kfree(state);
+	return 0;
+}
+
+static int max3353_running;
+
+static void max3353_init(struct fsl_xcvr_ops *this)
+{
+	int __maybe_unused rc;
+	u8 tmp;
+
+	pr_debug("%s\n", __func__);
+
+	if (!max3353_running) {
+		i2c_add_driver(&max3353_i2c_driver);
+
+		/* disable interrupts on the part */
+		max3353_write_reg(MAX3353_INTR_MASK, 0);
+
+		/* configure irq mode */
+		tmp = max3353_read_reg(MAX3353_CR1);
+		tmp |= CR1_IRQ_PUSH_PULL;
+		max3353_write_reg(MAX3353_CR1, tmp);
+
+		/* take the part out of shutdown */
+		tmp = max3353_read_reg(MAX3353_CR2);
+		tmp &= ~CR2_SHUTDOWN;		/* turn on the part */
+		max3353_write_reg(MAX3353_CR2, tmp);
+	}
+	max3353_running++;
+#if 0
+	/* configure INT2 for max3353 INT */
+	MCF_GPIO_PAR_IRQ0L =
+		(MCF_GPIO_PAR_IRQ0L & MCF_GPIO_PAR_IRQL_IRQ2_MASK) |
+		MCF_GPIO_PAR_IRQL_IRQ2_IRQ2;
+#else
+	/*
+	MCF_GPIO_PAR_IRQ0H |= MCF_GPIO_PAR_IRQH_IRQ7;
+	MCF_EPORT_EPPAR   = MCF_EPORT_EPPAR | MCF_EPORT_EPPAR_EPPA7_LEVEL;
+	MCF_EPORT_EPIER   = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE7;
+	MCF_INTC0_ICR7  = 2;
+	*/
+	/* use IRQ4 on Twr-Ser1 board by J11 selected */
+	MCF_GPIO_PAR_IRQ0H |= MCF_GPIO_PAR_IRQH_IRQ4_IRQ4;
+	MCF_EPORT_EPPAR   &= ~MCF_EPORT_EPPAR_EPPA4_LEVEL;
+	MCF_EPORT_EPIER   = MCF_EPORT_EPIER | MCF_EPORT_EPIER_EPIE4;
+	MCF_INTC0_ICR4  = 7;
+
+#endif
+	/* Configure USB_DP_PDOWN/USB_DM_PDOWN */
+	MCF_GPIO_PAR_DBGH1 &= ~MCF_GPIO_PAR_DEBUGH1_DAT0;
+	MCF_GPIO_PAR_DBGH1 &= ~MCF_GPIO_PAR_DEBUGH1_DAT1;
+	MCF_GPIO_PDDR_I |= 0xc0;
+	MCF_GPIO_PODR_I &= 0x3f;
+
+	/* Enable VBUS_EN and VBUS_OC signals */
+	MCF_GPIO_PAR_TIMER =
+		(MCF_GPIO_PAR_TIMER &
+		MCF_GPIO_PAR_TIMER_T3IN_MASK) |
+		MCF_GPIO_PAR_TIMER_T3IN_USB0_VBUSEN;
+
+	MCF_GPIO_PAR_TIMER =
+		(MCF_GPIO_PAR_TIMER &
+		MCF_GPIO_PAR_TIMER_T0IN_MASK) |
+		MCF_GPIO_PAR_TIMER_T0IN_USBO_VBUSOC;
+
+	/* Setup USB_VBUS_OC signal to be active-low */
+	MCF_CCM_MISCCR &= (~MCF_CCM_MISCCR_USBOOC);
+	MCF_CCM_MISCCR |= MCF_CCM_MISCCR_USBPUE;
+}
+
+static void max3353_uninit(struct fsl_xcvr_ops *this)
+{
+	pr_debug("%s\n", __func__);
+
+	max3353_running--;
+	if (!max3353_running)
+		i2c_del_driver(&max3353_i2c_driver);
+}
+
+/* set max3353 as USB host */
+static inline void max3353_set_host(void)
+{
+	u8 cr1, cr2, status;
+	pr_debug("%s\n", __func__);
+
+	/* configure transceiver for host mode */
+	cr1 = max3353_read_reg(MAX3353_CR1);
+	cr2 = max3353_read_reg(MAX3353_CR2);
+	status = max3353_read_reg(MAX3353_STATUS);
+	pr_debug("before: CR1 %02x CR2 %02x  STATUS %02x\n", cr1, cr2, status);
+
+	cr1 &= ~(CR1_DM_PULLDOWN | CR1_DP_PULLDOWN |
+		 CR1_DM_PULLUP   | CR1_DP_PULLUP);
+	cr1 |= (CR1_DP_PULLDOWN | CR1_DM_PULLDOWN);
+	max3353_write_reg(MAX3353_CR1, cr1);
+
+	cr1 = max3353_read_reg(MAX3353_CR1);
+	cr2 = max3353_read_reg(MAX3353_CR2);
+	status = max3353_read_reg(MAX3353_STATUS);
+	pr_debug(" after: CR1 %02x CR2 %02x  STATUS %02x\n", cr1, cr2, status);
+}
+
+/* set max3353 as USB device */
+static inline void max3353_set_dev(void)
+{
+	u8 cr1;
+	pr_debug("%s\n", __func__);
+
+	/* FS mode, DP pull up */
+	cr1 = max3353_read_reg(MAX3353_CR1);
+	cr1 &= ~(CR1_DM_PULLDOWN | CR1_DM_PULLDOWN | CR1_DP_PULLDOWN);
+	cr1 |= CR1_DP_PULLUP;
+	max3353_write_reg(MAX3353_CR1, cr1);
+
+}
+
+static void max3353_set_vbus_power(struct fsl_xcvr_ops *this, int on)
+{
+	pr_debug("%s(on=%d)\n", __func__, on);
+}
+
+
+/* Enable or disable the D+ pullup. */
+static void max3353_pullup(int on)
+{
+	u8 cr1;
+	unsigned short ccm;
+
+	pr_debug("%s(%d)\n", __func__, on);
+
+	cr1 = max3353_read_reg(MAX3353_CR1);
+	cr1 &= ~(CR1_DM_PULLDOWN | CR1_DP_PULLDOWN |
+		 CR1_DM_PULLUP   | CR1_DP_PULLUP);
+
+	ccm = MCF_CCM_UOCSR;
+	if (on) {
+		cr1 |= CR1_DP_PULLUP;
+		ccm |= MCF_CCM_UOCSR_BVLD;
+		ccm &= ~MCF_CCM_UOCSR_SEND;
+	} else {
+		ccm &= ~MCF_CCM_UOCSR_BVLD;
+	}
+
+	max3353_write_reg(MAX3353_CR1, cr1);
+	MCF_CCM_UOCSR = ccm;
+}
+
+/*
+ * return the state of the ID pin.
+ * return:	0 Mini-B or nothing connected (Gadget mode)
+ *              1 Mini-A connected (Host mode)
+ */
+int max3353_read_id_pin(void)
+{
+	u8 status = max3353_read_reg(MAX3353_STATUS);
+	return !!(status & STATUS_ID_GND);
+}
+EXPORT_SYMBOL(max3353_read_id_pin);
+
+static struct fsl_xcvr_ops max3353_ops = {
+	.name = "dr-max3353",
+	.init = max3353_init,
+	.uninit = max3353_uninit,
+	.set_host = max3353_set_host,
+	.set_device = max3353_set_dev,
+	.set_vbus_power = max3353_set_vbus_power,
+	.pullup = max3353_pullup,
+};
+
+/* module init routine.  register the transceiver */
+static int __init max3353xc_init(void)
+{
+	pr_debug("%s\n", __func__);
+
+	fsl_usb_xcvr_register(&max3353_ops);
+	return 0;
+}
+
+static void __exit max3353xc_exit(void)
+{
+	pr_debug("%s\n", __func__);
+	fsl_usb_xcvr_unregister(&max3353_ops);
+}
+
+module_init(max3353xc_init);
+module_exit(max3353xc_exit);
+
+MODULE_ALIAS("max3353");
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("max3353 transceiver driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/arch/m68k/coldfire/m5441x/usb.c
@@ -0,0 +1,276 @@
+/*
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+#include <linux/usb/fsl_xcvr.h>
+#include <asm/mcfsim.h>
+
+#define MCF_SCM_BCR		MCF_REG32(0xFC040024)
+#define MCF_SCM_BCR_GBR		(1 << 9)	/* global bursts for read */
+#define MCF_SCM_BCR_GBW		(1 << 8)	/* global bursts for write */
+#define MCF_SCM_BCR_SBE_ALL	(0xff << 0)	/* slave burst enable */
+
+#define MAX_XCVR 3
+struct fsl_xcvr_ops *g_xc_ops[MAX_XCVR] = { NULL };
+
+#ifdef ULPI_DEBUG
+void print_ulpi_regs(void)
+{
+	pr_debug("MCF_SCM_BCR=0x%08lx  MCF_CCM_MISCCR=0x%08x  "
+		 "MCF_CCM_MISSCR2=0x%08x  "
+		 "MCF_GPIO_PAR_TIMER=0x%08x  MCF_GPIO_PAR_FEC=08%08x  "
+		 "MCF_GPIO_PAR_SIMP0H=08%08x  MCF_GPIO_PODR_G=08%08x\n",
+		 MCF_SCM_BCR, MCF_CCM_MISCCR,
+		 MCF_CCM_MISCCR2, MCF_GPIO_PAR_TIMER,
+		 MCF_GPIO_PAR_FEC, MCF_GPIO_PAR_SIMP0H, MCF_GPIO_PODR_G);
+}
+EXPORT_SYMBOL(print_ulpi_regs);
+#endif
+
+static inline void fsl_usb_enable_clk(void)
+{
+	pr_debug("%s\n", __func__);
+
+#if defined(CONFIG_USB_M5441X_MAX3353_FSLS)
+	MCF_PM_PPMCR0 = 0x30;
+	MCF_CCM_MISCCR &= ~(MCF_CCM_MISCCR_USBOOC | MCF_CCM_MISCCR_USBHOC);
+	MCF_CCM_MISCCR |= MCF_CCM_MISCCR_USBSRC;
+#elif !defined(CONFIG_USB_M5441X_PLLCLK)
+	/* Use external clock source if PLL isn't a multiple of 60MHz */
+	MCF_CCM_MISCCR &= ~MCF_CCM_MISCCR_USBSRC;
+
+	/* Initialize the USB Clock: use USB input clock */
+	MCF_GPIO_PAR_IRQ0L =
+		(MCF_GPIO_PAR_IRQ0L &
+		MCF_GPIO_PAR_IRQL_IRQ6_MASK) |
+		MCF_GPIO_PAR_IRQL_IRQ6_USBCLKIN;
+#else
+	uint fvco, usbclk;
+
+	fvco = CONFIG_MCFCLK * ((MCF_PLL_DR & MCF_PLL_DR_OUTDIV1) + 1);
+	usbclk = fvco / (((MCF_PLL_DR & MCF_PLL_DR_OUTDIV4) >> 16) + 1);
+
+	if (usbclk != 60000000)
+		printk(KERN_ERR, "The usb host clock must be 60MHZ!\n\n");
+
+	MCF_PM_PPMCR0 = 0x30;
+	MCF_CCM_MISCCR |= MCF_CCM_MISCCR_USBSRC;
+#endif
+}
+
+static inline void fsl_usb_disable_clk(void)
+{
+	pr_debug("%s\n", __func__);
+}
+
+void fsl_usb_xcvr_register(struct fsl_xcvr_ops *xcvr_ops)
+{
+	int i;
+
+	pr_debug("%s '%s'\n", __func__, xcvr_ops->name);
+	for (i = 0; i < MAX_XCVR; i++) {
+		if (g_xc_ops[i] == NULL) {
+			g_xc_ops[i] = xcvr_ops;
+			return;
+		}
+	}
+
+	pr_debug("%s failed\n", __func__);
+}
+EXPORT_SYMBOL_GPL(fsl_usb_xcvr_register);
+
+void fsl_usb_xcvr_unregister(struct fsl_xcvr_ops *xcvr_ops)
+{
+	int i;
+
+	pr_debug("%s '%s'\n", __func__, xcvr_ops->name);
+	for (i = 0; i < MAX_XCVR; i++) {
+		if (g_xc_ops[i] == xcvr_ops) {
+			g_xc_ops[i] = NULL;
+			return;
+		}
+	}
+
+	pr_debug("%s failed\n", __func__);
+}
+EXPORT_SYMBOL_GPL(fsl_usb_xcvr_unregister);
+
+static struct fsl_xcvr_ops *fsl_usb_get_xcvr(char *name)
+{
+	int i;
+
+	pr_debug("%s '%s'\n", __func__, name);
+	if (name == NULL) {
+		printk(KERN_ERR "get_xcvr(): No tranceiver name\n");
+		return NULL;
+	}
+
+	for (i = 0; i < MAX_XCVR; i++) {
+		if (strcmp(g_xc_ops[i]->name, name) == 0)
+			return g_xc_ops[i];
+	}
+	pr_debug("Failed %s\n", __func__);
+	return NULL;
+}
+
+/* The dmamask must be set for EHCI to work */
+static u64 ehci_dmamask = ~(u32) 0;
+
+/*!
+ * Register an instance of a USB host platform device.
+ *
+ * @param	res:	resource pointer
+ * @param       n_res:	number of resources
+ * @param       config: config pointer
+ *
+ * @return      newly-registered platform_device
+ *
+ * Each supported host interface is registered as an instance
+ * of the "fsl-ehci" device.  Call this function multiple times
+ * to register each host interface.
+ */
+static int instance_id;
+struct platform_device *host_pdev_register(struct resource *res, int n_res,
+				   struct fsl_usb2_platform_data *config)
+{
+	struct platform_device *pdev;
+	int rc;
+
+	pr_debug("register host res=0x%p, size=%d\n", res, n_res);
+
+	pdev = platform_device_register_simple("fsl-ehci",
+					       instance_id, res, n_res);
+	if (IS_ERR(pdev)) {
+		printk(KERN_ERR "usb: can't register %s Host, %ld\n",
+		       config->name, PTR_ERR(pdev));
+		return NULL;
+	}
+
+	pdev->dev.coherent_dma_mask = 0xffffffff;
+	pdev->dev.dma_mask = &ehci_dmamask;
+
+	rc = platform_device_add_data(pdev, config,
+				      sizeof(struct fsl_usb2_platform_data));
+	if (rc) {
+		platform_device_unregister(pdev);
+		return NULL;
+	}
+
+	printk(KERN_INFO "usb: %s host (%s) registered\n", config->name,
+	       config->transceiver);
+	pr_debug("pdev=0x%p  dev=0x%p  resources=0x%p  pdata=0x%p\n",
+		 pdev, &pdev->dev, pdev->resource, pdev->dev.platform_data);
+
+	instance_id++;
+
+	return pdev;
+}
+
+int usb_platform_host_init(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
+	struct fsl_xcvr_ops *xops;
+
+	xops = fsl_usb_get_xcvr(pdata->transceiver);
+	if (!xops) {
+		printk(KERN_ERR "DR transceiver ops missing\n");
+		return -EINVAL;
+	}
+	pdata->xcvr_ops = xops;
+	pdata->xcvr_type = xops->xcvr_type;
+	pdata->pdev = pdev;
+	xops->pdata = pdata;
+
+	if (pdata->gpio_usb_active)
+		if (pdata->gpio_usb_active())
+			return -EINVAL;
+
+	/* enable USB read, write and slave bursts */
+	MCF_SCM_BCR = MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW | MCF_SCM_BCR_SBE_ALL;
+	fsl_usb_enable_clk();
+
+	if (xops->init)
+		xops->init(xops);
+
+	return 0;
+}
+
+void usb_platform_host_uninit(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
+
+	if (pdata->xcvr_ops && pdata->xcvr_ops->uninit)
+		pdata->xcvr_ops->uninit(pdata->xcvr_ops);
+
+	pdata->regs = NULL;
+
+	if (pdata->gpio_usb_inactive)
+		pdata->gpio_usb_inactive();
+
+	fsl_usb_disable_clk();
+}
+
+
+static int dr_used;
+
+int usb_platform_dr_init(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
+	struct fsl_xcvr_ops *xops;
+
+	pr_debug("%s: pdev=0x%p  pdata=0x%p\n", __func__, pdev, pdata);
+
+	xops = fsl_usb_get_xcvr(pdata->transceiver);
+	if (!xops) {
+		printk(KERN_ERR "DR transceiver ops missing\n");
+		return -EINVAL;
+	}
+	pdata->xcvr_ops = xops;
+	pdata->xcvr_type = xops->xcvr_type;
+	pdata->pdev = pdev;
+	xops->pdata = pdata;
+
+	/* enable USB read, write and slave bursts */
+	MCF_SCM_BCR = MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW | MCF_SCM_BCR_SBE_ALL;
+
+	if (!dr_used) {
+		fsl_usb_enable_clk();
+
+		if (xops->init)
+			xops->init(xops);
+	}
+
+	dr_used++;
+	pr_debug("%s: success\n", __func__);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_platform_dr_init);
+
+void usb_platform_dr_uninit(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
+	pr_debug("%s\n", __func__);
+
+	dr_used--;
+	if (!dr_used) {
+		if (pdata->xcvr_ops && pdata->xcvr_ops->uninit)
+			pdata->xcvr_ops->uninit(pdata->xcvr_ops);
+
+		pdata->regs = NULL;
+		fsl_usb_disable_clk();
+	}
+}
+EXPORT_SYMBOL_GPL(usb_platform_dr_uninit);
--- /dev/null
+++ b/arch/m68k/coldfire/m5441x/usb.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+extern int usb_platform_host_init(struct platform_device *pdev);
+extern void usb_platform_host_uninit(struct fsl_usb2_platform_data *pdata);
+extern int usb_platform_dr_init(struct platform_device *pdev);
+extern void usb_platform_dr_uninit(struct fsl_usb2_platform_data *pdata);
+extern struct platform_device *host_pdev_register(struct resource *res,
+		  int n_res, struct fsl_usb2_platform_data *config);
+
+
+#if defined CONFIG_USB_EHCI_HCD || defined CONFIG_USB_EHCI_HCD_MODULE
+static inline void dr_register_host(struct resource *r, int rs)
+{
+	PDATA->operating_mode = DR_HOST_MODE;
+	host_pdev_register(r, rs, PDATA);
+}
+#else
+static inline void dr_register_host(struct resource *r, int rs)
+{
+}
+#endif
+
+#ifdef CONFIG_USB_GADGET_FSL_USB2
+static struct platform_device dr_udc_device;
+
+static inline void dr_register_udc(void)
+{
+	PDATA->operating_mode = DR_UDC_MODE;
+	dr_udc_device.dev.platform_data = PDATA;
+
+	if (platform_device_register(&dr_udc_device))
+		printk(KERN_ERR "usb: can't register DR gadget\n");
+	else
+		printk(KERN_INFO "usb: DR gadget (%s) registered\n",
+		       PDATA->transceiver);
+}
+#else
+static inline void dr_register_udc(void)
+{
+}
+#endif
+
+#ifdef CONFIG_USB_OTG
+static struct platform_device dr_otg_device;
+
+/*
+ * set the proper operating_mode and
+ * platform_data pointer, then register the
+ * device.
+ */
+static inline void dr_register_otg(void)
+{
+	PDATA->operating_mode = FSL_USB2_DR_OTG;
+	dr_otg_device.dev.platform_data = PDATA;
+
+	if (platform_device_register(&dr_otg_device))
+		printk(KERN_ERR "usb: can't register otg device\n");
+	else
+		printk(KERN_INFO "usb: DR OTG registered\n");
+}
+#else
+static inline void dr_register_otg(void)
+{
+}
+#endif
--- /dev/null
+++ b/arch/m68k/coldfire/m5441x/usb_dr.c
@@ -0,0 +1,179 @@
+/*
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+#include <asm/mcfsim.h>
+
+#define USB_OTGREGS_BASE MCF_REG32(0xFC0B0000)
+#define INT_USB		(64 + 64 + 64 + 17)	/* INTC1:17 17.2.9.1*/
+#define INT_UOCSR	(64 + 64 + 64 + 27)	/* INTC1:27 17.2.9.1 */
+
+/*
+ * Determine which platform_data struct to use, based on which
+ * transceiver is configured.
+ * PDATA is a pointer to it.
+ */
+#ifdef CONFIG_USB_M5441X_ULPI
+static struct fsl_usb2_platform_data dr_config_ulpi;
+#define PDATA (&dr_config_ulpi)
+#else
+static struct fsl_usb2_platform_data dr_config_fsls;
+#define PDATA (&dr_config_fsls)
+#endif
+
+/*
+ * Used to set pdata->operating_mode before registering the platform_device.
+ * If OTG is configured, the controller operates in OTG mode,
+ * otherwise it's either host or device.
+ */
+#ifdef CONFIG_USB_OTG
+#define DR_UDC_MODE     FSL_USB2_DR_OTG
+#define DR_HOST_MODE    FSL_USB2_DR_OTG
+#else
+#define DR_UDC_MODE     FSL_USB2_DR_DEVICE
+#define DR_HOST_MODE    FSL_USB2_DR_HOST
+#endif
+
+#include "usb.h"
+
+/*
+ * platform data structs
+ *   - Which one to use is determined by CONFIG options in usb.h
+ *   - operating_mode plugged at run time
+ */
+
+/* off-chip ULPI transceiver */
+static struct fsl_usb2_platform_data __maybe_unused dr_config_ulpi = {
+	.name            = "DR",
+	.init   = usb_platform_dr_init,
+	.exit = usb_platform_dr_uninit,
+	.phy_mode	 = FSL_USB2_PHY_ULPI,
+	.transceiver     = "dr-ulpi",
+	.power_budget    = 500,
+	.es              = 1,
+	.big_endian_mmio = 1,
+	.big_endian_desc = 1,
+	.le_setup_buf    = 1,
+};
+
+/* on-chip FS/LS serial transceiver */
+static struct fsl_usb2_platform_data __maybe_unused dr_config_fsls = {
+	.name            = "DR",
+	.init   = usb_platform_dr_init,
+	.exit = usb_platform_dr_uninit,
+	.phy_mode        = FSL_USB2_PHY_SERIAL,
+#ifdef CONFIG_USB_M5441X_MAX3353_FSLS
+	.transceiver	 = "dr-max3353",
+#else
+	.transceiver     = "dr-fsls",
+#endif
+	.power_budget    = 500,
+	.es              = 1,
+	.big_endian_mmio = 1,
+	.big_endian_desc = 1,
+	.le_setup_buf    = 1,
+};
+
+/*
+ * resources
+ */
+static struct resource dr_udc_resources[] = {
+	[0] = {
+		.start = (u32)(&USB_OTGREGS_BASE),
+		.end   = (u32)(&USB_OTGREGS_BASE + 0x1ff),
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = INT_USB,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource dr_otg_resources[] = {
+	[0] = {
+		.start = (u32)(&USB_OTGREGS_BASE),
+		.end   = (u32)(&USB_OTGREGS_BASE + 0x1ff),
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = INT_USB,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource dr_host_resources[] = {
+	[0] = {
+		.start = (u32)(&USB_OTGREGS_BASE),
+		.end   = (u32)(&USB_OTGREGS_BASE + 0x1ff),
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = INT_USB,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static u64 dr_udc_dmamask = ~(u32) 0;
+static void dr_udc_release(struct device *dev)
+{
+}
+
+static u64 dr_otg_dmamask = ~(u32) 0;
+static void dr_otg_release(struct device *dev)
+{
+}
+
+/*
+ * platform device structs
+ *   dev.platform_data field plugged at run time
+ */
+static struct platform_device __maybe_unused dr_udc_device = {
+	.name = "fsl-usb2-udc",
+	.id   = -1,
+	.dev  = {
+		.release           = dr_udc_release,
+		.dma_mask          = &dr_udc_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.resource      = dr_udc_resources,
+	.num_resources = ARRAY_SIZE(dr_udc_resources),
+};
+
+static struct platform_device __maybe_unused dr_otg_device = {
+#ifdef CONFIG_USB_M5441X_MAX3353_FSLS
+	.name = "max3353-otg",
+#else
+	.name = "fsl-usb2-otg",
+#endif
+	.id = -1,
+	.dev = {
+		.release           = dr_otg_release,
+		.dma_mask          = &dr_otg_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.resource      = dr_otg_resources,
+	.num_resources = ARRAY_SIZE(dr_otg_resources),
+};
+
+static int __init usb_dr_init(void)
+{
+	pr_debug("%s:\n", __func__);
+
+	dr_register_otg();
+	dr_register_host(dr_host_resources, ARRAY_SIZE(dr_host_resources));
+	dr_register_udc();
+
+	return 0;
+}
+
+module_init(usb_dr_init);
--- /dev/null
+++ b/arch/m68k/coldfire/m5441x/usb_host.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2004-2011 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+#include <asm/mcfsim.h>
+
+#define USB_H1REGS_BASE		(0xFC0B4000)
+#define INT_USB_HOST		(64 + 64 + 64 + 18)	/* INTC1:18*/
+
+
+/*
+ * Define Host module platform_data struct to use, based on which
+ * transceiver is configured.
+ * PDATA is a pointer to it.
+ */
+#if defined(CONFIG_USB_M5441X_H1_FSLS)
+static struct fsl_usb2_platform_data h1_config_fsls;
+#define PDATA (&h1_config_fsls)
+#else
+#warning "Unknow ColdFire USB Host module transceiver!"
+#endif
+/*
+ * Used to set pdata->operating_mode before registering the platform_device.
+ */
+#define DR_UDC_MODE     FSL_USB2_DR_DEVICE
+#define DR_HOST_MODE    FSL_USB2_DR_HOST
+
+#include "usb.h"
+
+static int h1_gpio_active(void)
+{
+	/* Configure USB_DP_PDOWN/USB_DM_PDOWN (external resistor) */
+	MCF_GPIO_PAR_DBGH1 &= ~MCF_GPIO_PAR_DEBUGH1_DAT0;
+	MCF_GPIO_PAR_DBGH1 &= ~MCF_GPIO_PAR_DEBUGH1_DAT1;
+	MCF_GPIO_PDDR_I |= 0xc0;
+	MCF_GPIO_PODR_I &= 0x3f;
+
+	MCF_GPIO_PAR_CS &= 0x0F; /*Enable GPIOB5, GPIOB6*/
+
+	MCF_GPIO_PDDR_B &= 0xDF; /*GPIOB5, input, USB_OC*/
+	MCF_GPIO_PCR_B |= 0x0C00; /*pull up*/
+
+	MCF_GPIO_PDDR_B |= 0x40; /*GPIOB6, output*/
+	MCF_GPIO_PODR_B |= 0x40; /*GPIOB6, output 1, VBUS enable*/
+	MCF_GPIO_PCR_B &= ~0x3000; /*pull disable*/
+
+	return 0;
+}
+
+static void h1_gpio_inactive(void)
+{
+	MCF_GPIO_PODR_B &= 0xBF; /*GPIOB6, output 0*/
+}
+
+
+/*
+ * platform data struct
+ *   - operating_mode plugged at run time
+ */
+
+/* on-chip FS/LS serial transceiver */
+static struct fsl_usb2_platform_data usbh1_config = {
+	.name              = "Host1",
+	.init     = usb_platform_host_init,
+	.exit   = usb_platform_host_uninit,
+	.operating_mode    = FSL_USB2_MPH_HOST,
+	.power_budget      = 500,		/* MIC2076: 500 mA max power */
+	.phy_mode          = FSL_USB2_PHY_SERIAL,	/* FS/LS on-chip xcvr */
+	.transceiver       = "h1-fsls",
+	.gpio_usb_active   = h1_gpio_active,
+	.gpio_usb_inactive = h1_gpio_inactive,
+	.es                = 1,
+	.big_endian_mmio   = 1,
+	.big_endian_desc   = 1,
+};
+
+/*
+ * resources
+ */
+static struct resource h1_resources[] = {
+	[0] = {
+		.start = USB_H1REGS_BASE,
+		.end   = USB_H1REGS_BASE + 0x1ff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = INT_USB_HOST,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static int __init usbh1_init(void)
+{
+	host_pdev_register(h1_resources, ARRAY_SIZE(h1_resources),
+			   &usbh1_config);
+	return 0;
+}
+module_init(usbh1_init);
--- /dev/null
+++ b/arch/m68k/coldfire/m5441x/xcvr.c
@@ -0,0 +1,198 @@
+/*
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/usb/fsl_xcvr.h>
+#include <asm/mcfsim.h>
+
+/* Use the configured xcvr_ops */
+#ifdef CONFIG_USB_M5441X_ULPI
+#define XCVR_OPS (&xcvr_ops_ulpi)
+#elif defined CONFIG_USB_M5441X_FSLS
+#define XCVR_OPS (&xcvr_ops_fsls)
+#else
+#error "Invalid USB transceiver selection."
+#endif
+
+#define MCF_FEC_ENET0_RCR	MCF_REG32(0xFC0D4084)
+
+/*
+ * Init routine for on-chip FSLS xcvr
+ */
+static void xcvr_fsls_init(struct fsl_xcvr_ops *this)
+{
+	pr_debug("%s: name=%s\n", __func__, this->name);
+
+	/* Configure USB_DP_PDOWN/USB_DM_PDOWN (external resistor) */
+	MCF_GPIO_PAR_DBGH1 &= ~MCF_GPIO_PAR_DEBUGH1_DAT0;
+	MCF_GPIO_PAR_DBGH1 &= ~MCF_GPIO_PAR_DEBUGH1_DAT1;
+	MCF_GPIO_PDDR_I |= 0xc0;
+	MCF_GPIO_PODR_I &= 0x3f;
+
+
+	MCF_GPIO_PAR_CS &= 0x0F; /*Enable GPIOB5, GPIOB6*/
+
+	MCF_GPIO_PDDR_B &= 0xDF; /*GPIOB5, input*/
+	MCF_GPIO_PDDR_B |= 0x40; /*GPIOB6, output*/
+
+	MCF_GPIO_PODR_B |= 0x40; /*GPIOB6, output 1*/
+#if 0
+	/* Enable VBUS_EN and VBUS_OC signals */
+	MCF_GPIO_PAR_TIMER =
+		(MCF_GPIO_PAR_TIMER &
+		MCF_GPIO_PAR_TIMER_T3IN_MASK) |
+		MCF_GPIO_PAR_TIMER_T3IN_USB0_VBUSEN;
+
+	MCF_GPIO_PAR_TIMER =
+		(MCF_GPIO_PAR_TIMER &
+		MCF_GPIO_PAR_TIMER_T0IN_MASK) |
+		MCF_GPIO_PAR_TIMER_T0IN_USBO_VBUSOC;
+
+	/* Setup USB_VBUS_OC signal to be active-low */
+	MCF_CCM_MISCCR &= (~MCF_CCM_MISCCR_USBOOC);
+	MCF_CCM_MISCCR |= MCF_CCM_MISCCR_USBPUE;
+#endif
+
+}
+
+/*
+ * Init routine for off-chip ULPI xcvr
+ */
+static void xcvr_ulpi_init(struct fsl_xcvr_ops *this)
+{
+	pr_debug("%s: name=%s\n", __func__, this->name);
+
+	/* disable FEC2 clock */
+	MCF_PM_PPMSR0 = 54;
+
+	/* enable USB OTG clock*/
+	MCF_PM_PPMCR0 = 44;
+
+	/* Chip select for ULPI: GPIO G4 as CS between ULPI and RMII1*/
+	MCF_GPIO_PAR_SIMP0H =
+		(MCF_GPIO_PAR_SIMP0H &
+		MCF_GPIO_PAR_SIMP0H_DAT_MASK) |
+		MCF_GPIO_PAR_SIMP0H_DAT_GPIO;
+
+	MCF_GPIO_PDDR_G =
+		(MCF_GPIO_PDDR_G &
+		MCF_GPIO_PDDR_G4_MASK) |
+		MCF_GPIO_PDDR_G4_OUTPUT;
+
+	MCF_GPIO_PODR_G =
+		(MCF_GPIO_PODR_G &
+		MCF_GPIO_PODR_G4_MASK) |
+		MCF_GPIO_PODR_G4_VAL;
+
+	/* Enable ULPI */
+	MCF_CCM_MISCCR2 = MCF_CCM_MISCCR2 & (~MCF_CCM_MISCCR2_ULPI);
+
+	/* Slew rate setting for OTG */
+	MCF_GPIO_SRCR_FEC = 0x0f;
+	MCF_GPIO_SRCR_TIMER = 0xc3;
+	MCF_GPIO_SRCR_IRQ0 = 0x03;
+
+	/* Enable the required ULPI signals */
+	MCF_GPIO_PAR_TIMER =
+		(MCF_GPIO_PAR_TIMER &
+		MCF_GPIO_PAR_TIMER_T3IN_MASK) |
+		MCF_GPIO_PAR_TIMER_T3IN_ULPI_DIR;
+
+	MCF_GPIO_PAR_TIMER =
+		(MCF_GPIO_PAR_TIMER &
+		MCF_GPIO_PAR_TIMER_T0IN_MASK) |
+		MCF_GPIO_PAR_TIMER_T0IN_ULPI_NXT;
+
+	MCF_FEC_ENET0_RCR = 0x104; /* FEC0 as RMII mode */
+
+	MCF_GPIO_PAR_FEC =
+		(MCF_GPIO_PAR_FEC &
+		MCF_GPIO_PAR_FEC_FEC_MASK) |
+		MCF_GPIO_PAR_FEC_FEC_RMII0FUL_ULPI;
+
+
+	pr_debug("MCF_GPIO_PAR_TIMER:0x%x, MCF_GPIO_PAR_FEC:0x%x,"
+		 "MCF_GPIO_PAR_SIMP0H:0x%x, MCF_GPIO_PDDR_G:0x%x,"
+		 "MCF_GPIO_PODR_G:0x%x, MCF_CCM_MISCCR2:0x%x\n\n",
+		 MCF_GPIO_PAR_TIMER, MCF_GPIO_PAR_FEC,
+		 MCF_GPIO_PAR_SIMP0H, MCF_GPIO_PDDR_G,
+		 MCF_GPIO_PODR_G, MCF_CCM_MISCCR2);
+
+	pr_debug("OTGSC:0x%lx, PORTSC:0x%lx, USBMODE:0x%lx, "
+		 "USBCMD:0x%lx, USBSTS:0x%lx, USBINTR:0x%lx, "
+		 "MCF_CCM_UOCSR:0x%x\n\n",
+		MCF_REG32(0xfc0b01a4), MCF_REG32(0xfc0b0184),
+		MCF_REG32(0xfc0b01a8), MCF_REG32(0xfc0b0140),
+		MCF_REG32(0xfc0b0144), MCF_REG32(0xfc0b0148),
+		MCF_CCM_UOCSR);
+}
+
+static void xcvr_uninit(struct fsl_xcvr_ops *this)
+{
+	pr_debug("%s\n", __func__);
+}
+
+static void xcvr_pullup(int on)
+{
+	unsigned short ccm = in_be16(&MCF_CCM_UOCSR);
+
+	pr_debug("%s(%d)\n", __func__, on);
+
+	ccm = in_be16(&MCF_CCM_UOCSR);
+	if (on) {
+		ccm |= MCF_CCM_UOCSR_BVLD;
+		ccm &= ~MCF_CCM_UOCSR_SEND;
+		out_be16(&MCF_CCM_UOCSR, ccm);
+	} else {
+		ccm &= ~MCF_CCM_UOCSR_BVLD;
+		out_be16(&MCF_CCM_UOCSR, ccm);
+	}
+}
+
+struct fsl_xcvr_ops xcvr_ops_ulpi = {
+	.init   = xcvr_ulpi_init,
+	.uninit = xcvr_uninit,
+	.pullup = xcvr_pullup,
+	.name   = "dr-ulpi",
+};
+
+struct fsl_xcvr_ops xcvr_ops_fsls = {
+	.init   = xcvr_fsls_init,
+	.uninit = xcvr_uninit,
+	.pullup = xcvr_pullup,
+	.name   = "dr-fsls",
+};
+
+static int __init usb_xcvr_init(void)
+{
+	struct fsl_xcvr_ops *xops = XCVR_OPS;
+
+	pr_debug("%s %s\n", __func__, xops->name);
+	fsl_usb_xcvr_register(xops);
+
+	return 0;
+}
+
+static void __exit usb_xcvr_exit(void)
+{
+	fsl_usb_xcvr_unregister(XCVR_OPS);
+}
+
+module_init(usb_xcvr_init);
+module_exit(usb_xcvr_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("External ULPI xcvr driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/arch/m68k/coldfire/m5441x/xcvr_host.c
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2005-2011 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/usb/fsl_xcvr.h>
+#include <asm/mcfsim.h>
+
+/*
+ * xcvr_ops for the on-chip xcvr on the DR controller
+ * No ops needed.
+ */
+struct fsl_xcvr_ops xcvr_ops_h1_fsls = {
+	.name   = "h1-fsls",
+};
+
+
+static int __init usb_xcvr_host_init(void)
+{
+	fsl_usb_xcvr_register(&xcvr_ops_h1_fsls);
+
+	return 0;
+}
+
+static void __exit usb_xcvr_host_exit(void)
+{
+	fsl_usb_xcvr_unregister(&xcvr_ops_h1_fsls);
+}
+
+module_init(usb_xcvr_host_init);
+module_exit(usb_xcvr_host_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("On-chip FS/LS xcvr host driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/arch/m68k/coldfire/m5445x/usb.c
@@ -0,0 +1,220 @@
+/*
+ * Copyright 2004-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+#include <linux/usb/fsl_xcvr.h>
+#include <asm/mcfsim.h>
+
+#define MCF_SCM_BCR		MCF_REG32(0xFC040024)
+#define MCF_SCM_BCR_GBR		(1 << 9)	/* global bursts for read */
+#define MCF_SCM_BCR_GBW		(1 << 8)	/* global bursts for write */
+#define MCF_SCM_BCR_SBE_ALL	(0xff << 0)	/* slave burst enable */
+
+#define MAX_XCVR 3
+struct fsl_xcvr_ops *g_xc_ops[MAX_XCVR] = { NULL };
+
+#ifdef ULPI_DEBUG
+void print_ulpi_regs(void)
+{
+	pr_debug("MCF_SCM_BCR=0x%08lx  MCF_CCM_MISCCR=0x%08x  "
+		 "MCF_GPIO_PAR_DMA=0x%08x  MCF_GPIO_PAR_USB=08%08x  "
+		 "MCF_GPIO_PAR_FEC=08%08x\n",
+		 MCF_SCM_BCR, MCF_CCM_MISCCR, MCF_GPIO_PAR_DMA,
+		 MCF_GPIO_PAR_USB, MCF_GPIO_PAR_FEC);
+}
+EXPORT_SYMBOL(print_ulpi_regs);
+#endif
+
+static inline void fsl_usb_enable_clk(void)
+{
+	pr_debug("%s\n", __func__);
+
+	/* Use external clock source if PLL isn't a multiple of 60MHz */
+	MCF_CCM_MISCCR &= ~MCF_CCM_MISCCR_USBSRC;
+
+	/* Initialize the USB Clock: use USB input clock */
+	MCF_GPIO_PAR_DMA = (MCF_GPIO_PAR_DMA & MCF_GPIO_PAR_DMA_DREQ1_MASK) |
+			   MCF_GPIO_PAR_DMA_DREQ1_USB_CLKIN;
+}
+
+static inline void fsl_usb_disable_clk(void)
+{
+	pr_debug("%s\n", __func__);
+}
+
+void fsl_usb_xcvr_register(struct fsl_xcvr_ops *xcvr_ops)
+{
+	int i;
+
+	pr_debug("%s '%s'\n", __func__, xcvr_ops->name);
+	for (i = 0; i < MAX_XCVR; i++) {
+		if (g_xc_ops[i] == NULL) {
+			g_xc_ops[i] = xcvr_ops;
+			return;
+		}
+	}
+
+	pr_debug("%s failed\n", __func__);
+}
+EXPORT_SYMBOL_GPL(fsl_usb_xcvr_register);
+
+void fsl_usb_xcvr_unregister(struct fsl_xcvr_ops *xcvr_ops)
+{
+	int i;
+
+	pr_debug("%s '%s'\n", __func__, xcvr_ops->name);
+	for (i = 0; i < MAX_XCVR; i++) {
+		if (g_xc_ops[i] == xcvr_ops) {
+			g_xc_ops[i] = NULL;
+			return;
+		}
+	}
+
+	pr_debug("%s failed\n", __func__);
+}
+EXPORT_SYMBOL_GPL(fsl_usb_xcvr_unregister);
+
+static struct fsl_xcvr_ops *fsl_usb_get_xcvr(char *name)
+{
+	int i;
+
+	pr_debug("%s '%s'\n", __func__, name);
+	if (name == NULL) {
+		printk(KERN_ERR "get_xcvr(): No tranceiver name\n");
+		return NULL;
+	}
+
+	for (i = 0; i < MAX_XCVR; i++) {
+		if (strcmp(g_xc_ops[i]->name, name) == 0)
+			return g_xc_ops[i];
+	}
+	pr_debug("Failed %s\n", __func__);
+	return NULL;
+}
+
+/* The dmamask must be set for EHCI to work */
+static u64 ehci_dmamask = ~(u32) 0;
+
+/*!
+ * Register an instance of a USB host platform device.
+ *
+ * @param	res:	resource pointer
+ * @param       n_res:	number of resources
+ * @param       config: config pointer
+ *
+ * @return      newly-registered platform_device
+ *
+ * Each supported host interface is registered as an instance
+ * of the "fsl-ehci" device.  Call this function multiple times
+ * to register each host interface.
+ */
+static int instance_id;
+struct platform_device *host_pdev_register(struct resource *res, int n_res,
+					struct fsl_usb2_platform_data *config)
+{
+	struct platform_device *pdev;
+	int rc;
+
+	pr_debug("register host res=0x%p, size=%d\n", res, n_res);
+
+	pdev = platform_device_register_simple("fsl-ehci",
+					       instance_id, res, n_res);
+	if (IS_ERR(pdev)) {
+		printk(KERN_ERR "usb: can't register %s Host, %ld\n",
+		       config->name, PTR_ERR(pdev));
+		return NULL;
+	}
+
+	pdev->dev.coherent_dma_mask = 0xffffffff;
+	pdev->dev.dma_mask = &ehci_dmamask;
+
+	rc = platform_device_add_data(pdev, config,
+				      sizeof(struct fsl_usb2_platform_data));
+	if (rc) {
+		platform_device_unregister(pdev);
+		return NULL;
+	}
+
+	printk(KERN_INFO "usb: %s host (%s) registered\n", config->name,
+	       config->transceiver);
+	pr_debug("pdev=0x%p  dev=0x%p  resources=0x%p  pdata=0x%p\n",
+		 pdev, &pdev->dev, pdev->resource, pdev->dev.platform_data);
+
+	instance_id++;
+
+	return pdev;
+}
+
+
+static int dr_used;
+
+int usb_platform_dr_init(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
+	struct fsl_xcvr_ops *xops;
+
+	pr_debug("%s: pdev=0x%p  pdata=0x%p\n", __func__, pdev, pdata);
+
+	xops = fsl_usb_get_xcvr(pdata->transceiver);
+	if (!xops) {
+		printk(KERN_ERR "DR transceiver ops missing\n");
+		return -EINVAL;
+	}
+	pdata->xcvr_ops = xops;
+	pdata->xcvr_type = xops->xcvr_type;
+	pdata->pdev = pdev;
+	xops->pdata = pdata;
+
+	/* enable USB read, write and slave bursts */
+	MCF_SCM_BCR = MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW | MCF_SCM_BCR_SBE_ALL;
+
+	if (!dr_used) {
+		fsl_usb_enable_clk();
+
+		if (xops->init)
+			xops->init(xops);
+	}
+
+	dr_used++;
+	pr_debug("%s: success\n", __func__);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_platform_dr_init);
+
+void usb_platform_dr_uninit(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
+
+	pr_debug("%s\n", __func__);
+
+	dr_used--;
+	if (!dr_used) {
+		if (pdata->xcvr_ops && pdata->xcvr_ops->uninit)
+			pdata->xcvr_ops->uninit(pdata->xcvr_ops);
+
+		pdata->regs = NULL;
+		fsl_usb_disable_clk();
+	}
+}
+EXPORT_SYMBOL_GPL(usb_platform_dr_uninit);
--- /dev/null
+++ b/arch/m68k/coldfire/m5445x/usb.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+extern int usb_platform_dr_init(struct platform_device *pdev);
+extern void usb_platform_dr_uninit(struct fsl_usb2_platform_data *pdata);
+extern struct platform_device *host_pdev_register(struct resource *res,
+		  int n_res, struct fsl_usb2_platform_data *config);
+
+
+/*
+ * Determine which platform_data struct to use, based on which
+ * transceiver is configured.
+ * PDATA is a pointer to it.
+ */
+#ifdef CONFIG_USB_M5445X_ULPI
+static struct fsl_usb2_platform_data dr_config_ulpi;
+#define PDATA (&dr_config_ulpi)
+#else
+static struct fsl_usb2_platform_data dr_config_fsls;
+#define PDATA (&dr_config_fsls)
+#endif
+
+/*
+ * Used to set pdata->operating_mode before registering the platform_device.
+ * If OTG is configured, the controller operates in OTG mode,
+ * otherwise it's either host or device.
+ */
+#ifdef CONFIG_USB_OTG
+#define DR_UDC_MODE	FSL_USB2_DR_OTG
+#define DR_HOST_MODE	FSL_USB2_DR_OTG
+#else
+#define DR_UDC_MODE	FSL_USB2_DR_DEVICE
+#define DR_HOST_MODE	FSL_USB2_DR_HOST
+#endif
+
+
+#if defined CONFIG_USB_EHCI_HCD || defined CONFIG_USB_EHCI_HCD_MODULE
+static inline void dr_register_host(struct resource *r, int rs)
+{
+	PDATA->operating_mode = DR_HOST_MODE;
+	host_pdev_register(r, rs, PDATA);
+}
+#else
+static inline void dr_register_host(struct resource *r, int rs)
+{
+}
+#endif
+
+#ifdef CONFIG_USB_GADGET_FSL_USB2
+static struct platform_device dr_udc_device;
+
+static inline void dr_register_udc(void)
+{
+	PDATA->operating_mode = DR_UDC_MODE;
+	dr_udc_device.dev.platform_data = PDATA;
+
+	if (platform_device_register(&dr_udc_device))
+		printk(KERN_ERR "usb: can't register DR gadget\n");
+	else
+		printk(KERN_INFO "usb: DR gadget (%s) registered\n",
+		       PDATA->transceiver);
+}
+#else
+static inline void dr_register_udc(void)
+{
+}
+#endif
+
+#ifdef CONFIG_USB_OTG
+static struct platform_device dr_otg_device;
+
+/*
+ * set the proper operating_mode and
+ * platform_data pointer, then register the
+ * device.
+ */
+static inline void dr_register_otg(void)
+{
+	PDATA->operating_mode = FSL_USB2_DR_OTG;
+	dr_otg_device.dev.platform_data = PDATA;
+
+	if (platform_device_register(&dr_otg_device))
+		printk(KERN_ERR "usb: can't register otg device\n");
+	else
+		printk(KERN_INFO "usb: DR OTG registered\n");
+}
+#else
+static inline void dr_register_otg(void)
+{
+}
+#endif
--- /dev/null
+++ b/arch/m68k/coldfire/m5445x/usb_dr.c
@@ -0,0 +1,152 @@
+/*
+ * Copyright 2004-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+#include <asm/mcfsim.h>
+
+#define USB_OTGREGS_BASE MCF_REG32(0xFC0B0000)
+#define INT_USB		(64 + 64 + 47)	/* INTC1:47 16.2.9.1 */
+#define INT_UOCSR	(64 + 64 + 53)	/* INTC1:53 16.2.9.1 */
+
+#include "usb.h"
+
+/*
+ * platform data structs
+ *   - Which one to use is determined by CONFIG options in usb.h
+ *   - operating_mode plugged at run time
+ */
+
+/* off-chip ULPI transceiver */
+static struct fsl_usb2_platform_data __maybe_unused dr_config_ulpi = {
+	.name            = "DR",
+	.init   = usb_platform_dr_init,
+	.exit = usb_platform_dr_uninit,
+	.phy_mode	 = FSL_USB2_PHY_ULPI,
+	.transceiver     = "dr-ulpi",
+	.power_budget    = 500,
+	.es              = 1,
+	.big_endian_mmio = 1,
+	.big_endian_desc = 1,
+	.le_setup_buf    = 1,
+};
+
+/* on-chip FS/LS serial transceiver */
+static struct fsl_usb2_platform_data __maybe_unused dr_config_fsls = {
+	.name            = "DR",
+	.init   = usb_platform_dr_init,
+	.exit = usb_platform_dr_uninit,
+	.phy_mode        = FSL_USB2_PHY_SERIAL,
+	.transceiver     = "dr-fsls",
+	.power_budget    = 500,
+	.es              = 1,
+	.big_endian_mmio = 1,
+	.big_endian_desc = 1,
+	.le_setup_buf    = 1,
+};
+
+/*
+ * resources
+ */
+static struct resource dr_host_resources[] = {
+	[0] = {
+		.start = (u32)(&USB_OTGREGS_BASE),
+		.end   = (u32)(&USB_OTGREGS_BASE + 0x1ff),
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = INT_USB,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource dr_otg_resources[] = {
+	[0] = {
+		.start = (u32)(&USB_OTGREGS_BASE),
+		.end   = (u32)(&USB_OTGREGS_BASE + 0x1ff),
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = INT_USB,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource dr_udc_resources[] = {
+	[0] = {
+		.start = (u32)(&USB_OTGREGS_BASE),
+		.end   = (u32)(&USB_OTGREGS_BASE + 0x1ff),
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = INT_USB,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+static u64 dr_udc_dmamask = ~(u32) 0;
+static void dr_udc_release(struct device *dev)
+{
+}
+
+static u64 dr_otg_dmamask = ~(u32) 0;
+static void dr_otg_release(struct device *dev)
+{
+}
+
+/*
+ * platform device structs
+ *   dev.platform_data field plugged at run time
+ */
+static struct platform_device __maybe_unused dr_udc_device = {
+	.name = "fsl-usb2-udc",
+	.id   = -1,
+	.dev  = {
+		.release           = dr_udc_release,
+		.dma_mask          = &dr_udc_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.resource      = dr_udc_resources,
+	.num_resources = ARRAY_SIZE(dr_udc_resources),
+};
+
+static struct platform_device __maybe_unused dr_otg_device = {
+	.name = "fsl-usb2-otg",
+	.id = -1,
+	.dev = {
+		.release           = dr_otg_release,
+		.dma_mask          = &dr_otg_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.resource      = dr_otg_resources,
+	.num_resources = ARRAY_SIZE(dr_otg_resources),
+};
+
+static int __init usb_dr_init(void)
+{
+	pr_debug("%s:\n", __func__);
+
+	dr_register_otg();
+	dr_register_host(dr_host_resources, ARRAY_SIZE(dr_host_resources));
+	dr_register_udc();
+
+	return 0;
+}
+
+module_init(usb_dr_init);
--- /dev/null
+++ b/arch/m68k/coldfire/m5445x/xcvr.c
@@ -0,0 +1,127 @@
+/*
+ * Copyright 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/usb/fsl_xcvr.h>
+#include <asm/mcfsim.h>
+
+/* Use the configured xcvr_ops */
+#ifdef CONFIG_USB_M5445X_ULPI
+#define XCVR_OPS (&xcvr_ops_ulpi)
+#elif defined CONFIG_USB_M5445X_FSLS
+#define XCVR_OPS (&xcvr_ops_fsls)
+#else
+#error "Invalid USB transceiver selection."
+#endif
+
+/*
+ * Init routine for on-chip FSLS xcvr
+ */
+static void xcvr_fsls_init(struct fsl_xcvr_ops *this)
+{
+	pr_debug("%s: name=%s\n", __func__, this->name);
+
+	/* Enable VBUS_EN and VBUS_OC signals */
+	MCF_GPIO_PAR_USB = MCF_GPIO_PAR_USB_VBUSEN_VBUSEN |
+			   MCF_GPIO_PAR_USB_VBUSOC_VBUSOC;
+
+	/* Setup USB_VBUS_OC signal to be active-low */
+	MCF_CCM_MISCCR |= MCF_CCM_MISCCR_USBOC;
+}
+
+/*
+ * Init routine for off-chip ULPI xcvr
+ */
+static void xcvr_ulpi_init(struct fsl_xcvr_ops *this)
+{
+	pr_debug("%s: name=%s\n", __func__, this->name);
+
+	/* Enable the required ULPI signals */
+	MCF_GPIO_PAR_DMA = (MCF_GPIO_PAR_DMA &
+			    MCF_GPIO_PAR_DMA_DACK1_MASK) |
+			    MCF_GPIO_PAR_DMA_DACK1_ULPI_DIR;
+
+	MCF_GPIO_PAR_USB = MCF_GPIO_PAR_USB_VBUSEN_ULPI_NXT |
+			   MCF_GPIO_PAR_USB_VBUSOC_ULPI_STP;
+
+	MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC &
+			    MCF_GPIO_PAR_FEC_FEC0_MASK) |
+			    MCF_GPIO_PAR_FEC_FEC0_RMII_ULPI;
+}
+
+static void xcvr_uninit(struct fsl_xcvr_ops *this)
+{
+	pr_debug("%s\n", __func__);
+}
+
+static void xcvr_pullup(int on)
+{
+	unsigned short ccm = in_be16(&MCF_CCM_UOCSR);
+
+	pr_debug("%s(%d)\n", __func__, on);
+
+	ccm = in_be16(&MCF_CCM_UOCSR);
+	if (on) {
+		ccm |= MCF_CCM_UOCSR_BVLD;
+		ccm &= ~MCF_CCM_UOCSR_SEND;
+		out_be16(&MCF_CCM_UOCSR, ccm);
+	} else {
+		ccm &= ~MCF_CCM_UOCSR_BVLD;
+		out_be16(&MCF_CCM_UOCSR, ccm);
+	}
+}
+
+struct fsl_xcvr_ops xcvr_ops_ulpi = {
+	.init   = xcvr_ulpi_init,
+	.uninit = xcvr_uninit,
+	.pullup = xcvr_pullup,
+	.name   = "dr-ulpi",
+};
+
+struct fsl_xcvr_ops xcvr_ops_fsls = {
+	.init   = xcvr_fsls_init,
+	.uninit = xcvr_uninit,
+	.pullup = xcvr_pullup,
+	.name   = "dr-fsls",
+};
+
+static int __init usb_xcvr_init(void)
+{
+	struct fsl_xcvr_ops *xops = XCVR_OPS;
+
+	pr_debug("%s %s\n", __func__, xops->name);
+	fsl_usb_xcvr_register(xops);
+
+	return 0;
+}
+
+static void __exit usb_xcvr_exit(void)
+{
+	fsl_usb_xcvr_unregister(XCVR_OPS);
+}
+
+module_init(usb_xcvr_init);
+module_exit(usb_xcvr_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("External ULPI xcvr driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/arch/m68k/include/asm/fsl_usb_gadget.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * USB Gadget side, platform-specific functionality.
+ */
+
+#include <linux/usb/fsl_xcvr.h>
+
+/* Needed for i2c/serial transceivers */
+static inline void
+fsl_platform_set_device_mode(struct fsl_usb2_platform_data *pdata)
+{
+	if (pdata->xcvr_ops && pdata->xcvr_ops->set_device)
+		pdata->xcvr_ops->set_device();
+}
+
+static inline void
+fsl_platform_pullup_enable(struct fsl_usb2_platform_data *pdata)
+{
+	if (pdata->xcvr_ops && pdata->xcvr_ops->pullup)
+		pdata->xcvr_ops->pullup(1);
+}
+
+static inline void
+fsl_platform_pullup_disable(struct fsl_usb2_platform_data *pdata)
+{
+	if (pdata->xcvr_ops && pdata->xcvr_ops->pullup)
+		pdata->xcvr_ops->pullup(0);
+}
--- /dev/null
+++ b/arch/m68k/include/asm/fsl_usb_io.h
@@ -0,0 +1,43 @@
+/* Copyright 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef _FSL_USB_IO_H
+#define _FSL_USB_IO_H
+
+#undef inb_p
+#undef outb_p
+#undef inl_p
+#undef outl_p
+#define inb_p in_8
+#define outb_p(b, addr) (void)((*(__force volatile u8 *) (addr)) = (b))
+#define inl_p in_be32
+#define outl_p(l, addr) (void)((*(__force volatile u32 *) (addr)) = (l))
+
+#define fsl_readl(addr)		in_be32((__force unsigned *)(addr))
+#define fsl_writel(val32, addr)	out_be32((__force unsigned *)(addr), (val32))
+
+static inline void fsl_set_usb_accessors(struct fsl_usb2_platform_data *pdata)
+{
+}
+/*
+#ifndef cpu_to_hc32
+#define cpu_to_hc32(x)	(x)
+#endif
+#ifndef hc32_to_cpu
+#define hc32_to_cpu(x)	(x)
+#endif
+*/
+#endif /* _FSL_USB_IO_H */
--- /dev/null
+++ b/arch/m68k/include/asm/fsl_usb_platform.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef FSL_USB_PLATFORM_H
+#define FSL_USB_PLATFORM_H
+
+#include <linux/usb/fsl_xcvr.h>
+#include <linux/usb/fsl_usb2.h>
+#include <asm/mcfsim.h>
+
+extern struct resource *otg_get_resources(void);
+
+extern struct fsl_usb2_platform_data;
+
+/* ehci_arc_hc_driver.flags value */
+#define FSL_PLATFORM_HC_FLAGS (HCD_USB2 | HCD_MEMORY)
+
+static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
+		enum fsl_usb2_phy_modes phy_mode,
+		unsigned int port_offset);
+
+static inline void fsl_platform_usb_setup(struct ehci_hcd *ehci)
+{
+	struct fsl_usb2_platform_data *pdata;
+
+	pdata = ehci_to_hcd(ehci)->self.controller->platform_data;
+	ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0);
+}
+
+static inline void fsl_platform_set_host_mode(struct usb_hcd *hcd)
+{
+	unsigned int temp;
+	struct fsl_usb2_platform_data *pdata;
+	struct fsl_usb_host_regs *regs;
+
+	pdata = hcd->self.controller->platform_data;
+	regs = pdata->regs;
+
+	if (pdata->xcvr_ops && pdata->xcvr_ops->set_host)
+		pdata->xcvr_ops->set_host();
+
+	/* set host mode and select "big endian" */
+	temp = in_be32(&regs->usbmode);
+	temp |= USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
+	out_be32(&regs->usbmode, temp);
+
+	pr_debug("%s: set usbmode to 0x%x\n\n", __func__,
+		in_be32(&regs->usbmode));
+
+}
+
+static inline void
+fsl_platform_set_vbus_power(struct fsl_usb2_platform_data *pdata, int on)
+{
+#ifdef CONFIG_USB_M5441X_FSLS
+	MCF_GPIO_PAR_CS &= 0x0F; /*Enable GPIOB5, GPIOB6*/
+
+	MCF_GPIO_PDDR_B &= 0xDF; /*GPIOB5, input*/
+	MCF_GPIO_PDDR_B |= 0x40; /*GPIOB6, output*/
+
+	if (on)
+		MCF_GPIO_PODR_B |= 0x40; /*GPIOB6, output 1*/
+	else
+		MCF_GPIO_PODR_B &= 0xBF; /*GPIOB6, output 0*/
+#endif
+}
+
+#endif
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_PARIDE) 		+= block/paride/
 obj-$(CONFIG_TC)		+= tc/
 obj-$(CONFIG_UWB)		+= uwb/
 obj-$(CONFIG_USB_OTG_UTILS)	+= usb/otg/
+obj-$(CONFIG_USB_OTG)	+= usb/otg/
 obj-$(CONFIG_USB)		+= usb/
 obj-$(CONFIG_USB_MUSB_HDRC)	+= usb/musb/
 obj-$(CONFIG_PCI)		+= usb/
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -57,6 +57,8 @@ config USB_ARCH_HAS_EHCI
 	boolean
 	default y if PPC_83xx
 	default y if PPC_MPC512x
+	default y if M5445X
+	default y if M5441X
 	default y if SOC_AU1200
 	default y if ARCH_IXP4XX
 	default y if ARCH_W90X900
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -109,7 +109,7 @@ config USB_SUSPEND
 config USB_OTG
 	bool "OTG support"
 	depends on USB && EXPERIMENTAL
-	depends on USB_SUSPEND
+#	depends on USB_SUSPEND
 	default n
 	help
 	  The most notable feature of USB OTG is support for a
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -156,7 +156,7 @@ config USB_ATMEL_USBA
 
 config USB_GADGET_FSL_USB2
 	boolean "Freescale Highspeed USB DR Peripheral Controller"
-	depends on FSL_SOC || ARCH_MXC
+	depends on FSL_SOC || ARCH_MXC || HAVE_FSL_USB_DR
 	select USB_GADGET_DUALSPEED
 	select USB_FSL_MPH_DR_OF if OF
 	help
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2004-2007 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. All rights reserved.
  *
  * Author: Li Yang <leoli@freescale.com>
  *         Jiang Bo <tanya.jiang@freescale.com>
@@ -52,6 +52,12 @@
 #define	DRIVER_AUTHOR	"Li Yang/Jiang Bo"
 #define	DRIVER_VERSION	"Apr 20, 2007"
 
+
+#define  USB_MODE_CTRL_MODE_MASK              0x00000003
+#define  USB_MODE_ES                          0x00000004 /* (big) Endian */
+#define cpu_to_hc32(x)  (x)
+#define hc32_to_cpu(x)  (x)
+
 #define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
 
 static const char driver_name[] = "fsl-usb2-udc";
@@ -62,6 +68,9 @@ static struct usb_dr_device *dr_regs;
 static struct usb_sys_interface *usb_sys_regs;
 #endif
 
+static int fsl_udc_suspend(struct device *dev, pm_message_t state);
+static int fsl_udc_resume(struct device *dev);
+
 /* it is initialized in probe()  */
 static struct fsl_udc *udc_controller = NULL;
 
@@ -76,6 +85,7 @@ fsl_ep0_desc = {
 
 static void fsl_ep_fifo_flush(struct usb_ep *_ep);
 
+#ifndef CONFIG_COLDFIRE
 #ifdef CONFIG_PPC32
 #define fsl_readl(addr)		in_le32(addr)
 #define fsl_writel(val32, addr) out_le32(addr, val32)
@@ -83,7 +93,7 @@ static void fsl_ep_fifo_flush(struct usb
 #define fsl_readl(addr)		readl(addr)
 #define fsl_writel(val32, addr) writel(val32, addr)
 #endif
-
+#endif
 /********************************************************************
  *	Internal Used Function
 ********************************************************************/
@@ -184,6 +194,12 @@ static int dr_controller_setup(struct fs
 	unsigned long timeout;
 #define FSL_UDC_RESET_TIMEOUT 1000
 
+#ifdef CONFIG_COLDFIRE
+	struct fsl_usb2_platform_data *pdata;
+	if (!udc)
+		return -EINVAL;
+	pdata = udc->pdata;
+#endif
 	/* Config PHY interface */
 	portctrl = fsl_readl(&dr_regs->portsc1);
 	portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH);
@@ -226,11 +242,20 @@ static int dr_controller_setup(struct fs
 
 	/* Set the controller as device mode */
 	tmp = fsl_readl(&dr_regs->usbmode);
+#ifdef CONFIG_COLDFIRE
+	tmp &= ~USB_MODE_CTRL_MODE_MASK;        /* clear mode bits */
+#endif
 	tmp |= USB_MODE_CTRL_MODE_DEVICE;
 	/* Disable Setup Lockout */
 	tmp |= USB_MODE_SETUP_LOCK_OFF;
+#ifdef CONFIG_COLDFIRE
+	if (pdata->es)
+		tmp |= USB_MODE_ES;
+#endif
 	fsl_writel(tmp, &dr_regs->usbmode);
-
+#ifdef CONFIG_COLDFIRE
+	fsl_platform_set_device_mode(pdata);
+#endif
 	/* Clear the setup status */
 	fsl_writel(0, &dr_regs->usbsts);
 
@@ -243,7 +268,7 @@ static int dr_controller_setup(struct fs
 		fsl_readl(&dr_regs->endpointlistaddr));
 
 	/* Config control enable i/o output, cpu endian register */
-#ifndef CONFIG_ARCH_MXC
+#if !defined(CONFIG_ARCH_MXC) && !defined(CONFIG_COLDFIRE)
 	ctrl = __raw_readl(&usb_sys_regs->control);
 	ctrl |= USB_CTRL_IOENB;
 	__raw_writel(ctrl, &usb_sys_regs->control);
@@ -267,7 +292,9 @@ static int dr_controller_setup(struct fs
 static void dr_controller_run(struct fsl_udc *udc)
 {
 	u32 temp;
-
+#ifdef CONFIG_COLDFIRE
+	fsl_platform_pullup_enable(udc->pdata);
+#endif
 	/* Enable DR irq reg */
 	temp = USB_INTR_INT_EN | USB_INTR_ERR_INT_EN
 		| USB_INTR_PTC_DETECT_EN | USB_INTR_RESET_EN
@@ -277,12 +304,12 @@ static void dr_controller_run(struct fsl
 
 	/* Clear stopped bit */
 	udc->stopped = 0;
-
+#ifndef CONFIG_COLDFIRE
 	/* Set the controller as device mode */
 	temp = fsl_readl(&dr_regs->usbmode);
 	temp |= USB_MODE_CTRL_MODE_DEVICE;
 	fsl_writel(temp, &dr_regs->usbmode);
-
+#endif
 	/* Set controller to Run */
 	temp = fsl_readl(&dr_regs->usbcmd);
 	temp |= USB_CMD_RUN_STOP;
@@ -292,7 +319,18 @@ static void dr_controller_run(struct fsl
 static void dr_controller_stop(struct fsl_udc *udc)
 {
 	unsigned int tmp;
-
+#ifdef CONFIG_COLDFIRE
+	if (udc->gadget.is_otg) {
+#ifdef CONFIG_USB_M5441X_MAX3353_FSLS
+		if (max3353_read_id_pin()) {
+#else
+		if (!(fsl_readl(&dr_regs->otgsc) & OTGSC_STS_USB_ID)) {
+#endif
+			pr_debug("udc: Leaving early\n");
+			return;
+		}
+	}
+#endif
 	/* disable all INTR */
 	fsl_writel(0, &dr_regs->usbintr);
 
@@ -301,7 +339,9 @@ static void dr_controller_stop(struct fs
 
 	/* disable IO output */
 /*	usb_sys_regs->control = 0; */
-
+#ifdef CONFIG_COLDFIRE
+	fsl_platform_pullup_disable(udc->pdata);
+#endif
 	/* set controller to Stop */
 	tmp = fsl_readl(&dr_regs->usbcmd);
 	tmp &= ~USB_CMD_RUN_STOP;
@@ -408,10 +448,13 @@ static void struct_ep_qh_setup(struct fs
 	}
 	if (zlt)
 		tmp |= EP_QUEUE_HEAD_ZLT_SEL;
-
+#ifdef CONFIG_COLDFIRE
+	p_QH->max_pkt_length = cpu_to_hc32(tmp);
+#else
 	p_QH->max_pkt_length = cpu_to_le32(tmp);
 	p_QH->next_dtd_ptr = 1;
 	p_QH->size_ioc_int_sts = 0;
+#endif
 }
 
 /* Setup qh structure and ep register for ep0. */
@@ -616,7 +659,11 @@ static void fsl_queue_td(struct fsl_ep *
 		struct fsl_req *lastreq;
 		lastreq = list_entry(ep->queue.prev, struct fsl_req, queue);
 		lastreq->tail->next_td_ptr =
+#ifdef CONFIG_COLDFIRE
+			cpu_to_hc32(req->head->td_dma & DTD_ADDR_MASK);
+#else
 			cpu_to_le32(req->head->td_dma & DTD_ADDR_MASK);
+#endif
 		/* Read prime bit, if 1 goto done */
 		if (fsl_readl(&dr_regs->endpointprime) & bitmask)
 			goto out;
@@ -641,11 +688,19 @@ static void fsl_queue_td(struct fsl_ep *
 
 	/* Write dQH next pointer and terminate bit to 0 */
 	temp = req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
+#ifdef CONFIG_COLDFIRE
+	dQH->next_dtd_ptr = cpu_to_hc32(temp);
+#else
 	dQH->next_dtd_ptr = cpu_to_le32(temp);
-
+#endif
 	/* Clear active and halt bit */
+#ifdef CONFIG_COLDFIRE
+	temp = cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE
+				| EP_QUEUE_HEAD_STATUS_HALT));
+#else
 	temp = cpu_to_le32(~(EP_QUEUE_HEAD_STATUS_ACTIVE
 			| EP_QUEUE_HEAD_STATUS_HALT));
+#endif
 	dQH->size_ioc_int_sts &= temp;
 
 	/* Ensure that updates to the QH will occure before priming. */
@@ -682,18 +737,32 @@ static struct ep_td_struct *fsl_build_dt
 
 	dtd->td_dma = *dma;
 	/* Clear reserved field */
+#ifdef CONFIG_COLDFIRE
+	swap_temp = hc32_to_cpu(dtd->size_ioc_sts);
+#else
 	swap_temp = cpu_to_le32(dtd->size_ioc_sts);
+#endif
 	swap_temp &= ~DTD_RESERVED_FIELDS;
+#ifdef CONFIG_COLDFIRE
+	dtd->size_ioc_sts = cpu_to_hc32(swap_temp);
+#else
 	dtd->size_ioc_sts = cpu_to_le32(swap_temp);
-
+#endif
 	/* Init all of buffer page pointers */
 	swap_temp = (u32) (req->req.dma + req->req.actual);
+#ifdef CONFIG_COLDFIRE
+	dtd->buff_ptr0 = cpu_to_hc32(swap_temp);
+	dtd->buff_ptr1 = cpu_to_hc32(swap_temp + 0x1000);
+	dtd->buff_ptr2 = cpu_to_hc32(swap_temp + 0x2000);
+	dtd->buff_ptr3 = cpu_to_hc32(swap_temp + 0x3000);
+	dtd->buff_ptr4 = cpu_to_hc32(swap_temp + 0x4000);
+#else
 	dtd->buff_ptr0 = cpu_to_le32(swap_temp);
 	dtd->buff_ptr1 = cpu_to_le32(swap_temp + 0x1000);
 	dtd->buff_ptr2 = cpu_to_le32(swap_temp + 0x2000);
 	dtd->buff_ptr3 = cpu_to_le32(swap_temp + 0x3000);
 	dtd->buff_ptr4 = cpu_to_le32(swap_temp + 0x4000);
-
+#endif
 	req->req.actual += *length;
 
 	/* zlp is needed if req->req.zero is set */
@@ -715,9 +784,11 @@ static struct ep_td_struct *fsl_build_dt
 	/* Enable interrupt for the last dtd of a request */
 	if (*is_last && !req->req.no_interrupt)
 		swap_temp |= DTD_IOC;
-
+#ifdef CONFIG_COLDFIRE
+	dtd->size_ioc_sts = cpu_to_hc32(swap_temp);
+#else
 	dtd->size_ioc_sts = cpu_to_le32(swap_temp);
-
+#endif
 	mb();
 
 	VDBG("length = %d address= 0x%x", *length, (int)*dma);
@@ -743,16 +814,22 @@ static int fsl_req_to_dtd(struct fsl_req
 			is_first = 0;
 			req->head = dtd;
 		} else {
+#ifdef CONFIG_COLDFIRE
+			last_dtd->next_td_ptr = cpu_to_hc32(dma);
+#else
 			last_dtd->next_td_ptr = cpu_to_le32(dma);
+#endif
 			last_dtd->next_td_virt = dtd;
 		}
 		last_dtd = dtd;
 
 		req->dtd_count++;
 	} while (!is_last);
-
+#ifdef CONFIG_COLDFIRE
+	dtd->next_td_ptr = cpu_to_hc32(DTD_NEXT_TERMINATE);
+#else
 	dtd->next_td_ptr = cpu_to_le32(DTD_NEXT_TERMINATE);
-
+#endif
 	req->tail = dtd;
 
 	return 0;
@@ -963,7 +1040,39 @@ out:
 
 	return status;
 }
+#ifdef CONFIG_COLDFIRE
+static int arcotg_fifo_status(struct usb_ep *_ep)
+{
+	struct fsl_ep *ep;
+	struct fsl_udc *udc;
+	int size = 0;
+	u32 bitmask;
+	struct ep_queue_head *d_qh;
+
+	ep = container_of(_ep, struct fsl_ep, ep);
+	if (!_ep || (!ep->desc && ep_index(ep) != 0))
+		return -ENODEV;
+
+	udc = (struct fsl_udc *)ep->udc;
+
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	d_qh = &ep->udc->ep_qh[ep_index(ep) * 2 + ep_is_in(ep)];
+
+	bitmask = (ep_is_in(ep)) ? (1 << (ep_index(ep) + 16)) :
+		(1 << (ep_index(ep)));
+
+	if (fsl_readl(&dr_regs->endptstatus) & bitmask)
+		size = (d_qh->size_ioc_int_sts & DTD_PACKET_SIZE)
+			>> DTD_LENGTH_BIT_POS;
+
+	pr_debug("%s %u\n", __func__, size);
+	return size;
+}
+
 
+#endif
 static void fsl_ep_fifo_flush(struct usb_ep *_ep)
 {
 	struct fsl_ep *ep;
@@ -1016,6 +1125,9 @@ static struct usb_ep_ops fsl_ep_ops = {
 	.dequeue = fsl_ep_dequeue,
 
 	.set_halt = fsl_ep_set_halt,
+#ifdef CONFIG_COLDFIRE
+	.fifo_status = arcotg_fifo_status,
+#endif
 	.fifo_flush = fsl_ep_fifo_flush,	/* flush fifo */
 };
 
@@ -1396,7 +1508,9 @@ static void tripwire_handler(struct fsl_
 {
 	u32 temp;
 	struct ep_queue_head *qh;
-
+#ifdef CONFIG_COLDFIRE
+	struct fsl_usb2_platform_data *pdata = udc->pdata;
+#endif
 	qh = &udc->ep_qh[ep_num * 2 + EP_DIR_OUT];
 
 	/* Clear bit in ENDPTSETUPSTAT */
@@ -1410,7 +1524,20 @@ static void tripwire_handler(struct fsl_
 		fsl_writel(temp | USB_CMD_SUTW, &dr_regs->usbcmd);
 
 		/* Copy the setup packet to local buffer */
+#if CONFIG_COLDFIRE
+		if (pdata->le_setup_buf) {
+			u32 *p = (u32 *)buffer_ptr;
+			u32 *s = (u32 *)qh->setup_buffer;
+
+			/* Convert little endian setup buffer to CPU endian */
+			*p++ = le32_to_cpu(*s++);
+			*p = le32_to_cpu(*s);
+		} else {
+			memcpy(buffer_ptr, (u8 *) qh->setup_buffer, 8);
+		}
+#else
 		memcpy(buffer_ptr, (u8 *) qh->setup_buffer, 8);
+#endif
 	} while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_SUTW));
 
 	/* Clear Setup Tripwire */
@@ -1434,19 +1561,19 @@ static int process_ep_req(struct fsl_udc
 	actual = curr_req->req.length;
 
 	for (j = 0; j < curr_req->dtd_count; j++) {
-		remaining_length = (le32_to_cpu(curr_td->size_ioc_sts)
+		remaining_length = (hc32_to_cpu(curr_td->size_ioc_sts)
 					& DTD_PACKET_SIZE)
 				>> DTD_LENGTH_BIT_POS;
 		actual -= remaining_length;
 
-		if ((errors = le32_to_cpu(curr_td->size_ioc_sts) &
-						DTD_ERROR_MASK)) {
+		errors = hc32_to_cpu(curr_td->size_ioc_sts);
+		if (errors & DTD_ERROR_MASK) {
 			if (errors & DTD_STATUS_HALTED) {
 				ERR("dTD error %08x QH=%d\n", errors, pipe);
 				/* Clear the errors and Halt condition */
-				tmp = le32_to_cpu(curr_qh->size_ioc_int_sts);
+				tmp = hc32_to_cpu(curr_qh->size_ioc_int_sts);
 				tmp &= ~errors;
-				curr_qh->size_ioc_int_sts = cpu_to_le32(tmp);
+				curr_qh->size_ioc_int_sts = cpu_to_hc32(tmp);
 				status = -EPIPE;
 				/* FIXME: continue with next queued TD? */
 
@@ -1464,7 +1591,7 @@ static int process_ep_req(struct fsl_udc
 				ERR("Unknown error has occured (0x%x)!\n",
 					errors);
 
-		} else if (le32_to_cpu(curr_td->size_ioc_sts)
+		} else if (hc32_to_cpu(curr_td->size_ioc_sts)
 				& DTD_STATUS_ACTIVE) {
 			VDBG("Request not complete");
 			status = REQ_UNCOMPLETE;
@@ -1552,7 +1679,10 @@ static void dtd_complete_irq(struct fsl_
 static void port_change_irq(struct fsl_udc *udc)
 {
 	u32 speed;
-
+#ifdef CONFIG_COLDFIRE
+	if (udc->bus_reset)
+		udc->bus_reset = 0;
+#endif
 	/* Bus resetting is finished */
 	if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) {
 		/* Get the speed */
@@ -1660,6 +1790,10 @@ static void reset_irq(struct fsl_udc *ud
 
 	if (fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET) {
 		VDBG("Bus reset");
+#ifdef CONFIG_COLDFIRE
+		/* Bus is reseting */
+		udc->bus_reset = 1;
+#endif
 		/* Reset all the queues, include XD, dTD, EP queue
 		 * head and TR Queue */
 		reset_queues(udc);
@@ -1793,19 +1927,49 @@ int usb_gadget_probe_driver(struct usb_g
 		udc_controller->driver = NULL;
 		goto out;
 	}
-
+#ifdef CONFIG_COLDFIRE
+	if (udc_controller->transceiver) {
+		/* Suspend the controller until OTG enable it */
+		udc_controller->stopped = 1;
+		printk(KERN_INFO "Suspend udc for OTG auto detect\n");
+
+		/* export udc suspend/resume call to OTG */
+		udc_controller->gadget.dev.driver->suspend = fsl_udc_suspend;
+		udc_controller->gadget.dev.driver->resume = fsl_udc_resume;
+
+		/* connect to bus through transceiver */
+		if (udc_controller->transceiver) {
+			retval = otg_set_peripheral(udc_controller->transceiver,
+					&udc_controller->gadget);
+			if (retval < 0) {
+				ERR("can't bind to transceiver\n");
+				driver->unbind(&udc_controller->gadget);
+				udc_controller->gadget.dev.driver = 0;
+				udc_controller->driver = 0;
+				return retval;
+			}
+		}
+	} else {
+		/* Enable DR IRQ reg and Set usbcmd reg  Run bit */
+		dr_controller_run(udc_controller);
+		udc_controller->usb_state = USB_STATE_ATTACHED;
+		udc_controller->ep0_state = WAIT_FOR_SETUP;
+		udc_controller->ep0_dir = 0;
+	}
+#else
 	/* Enable DR IRQ reg and Set usbcmd reg  Run bit */
 	dr_controller_run(udc_controller);
 	udc_controller->usb_state = USB_STATE_ATTACHED;
 	udc_controller->ep0_state = WAIT_FOR_SETUP;
 	udc_controller->ep0_dir = 0;
+#endif
 	printk(KERN_INFO "%s: bind to driver %s\n",
 			udc_controller->gadget.name, driver->driver.name);
 
 out:
 	if (retval)
 		printk(KERN_WARNING "gadget driver register failed %d\n",
-		       retval);
+				retval);
 	return retval;
 }
 EXPORT_SYMBOL(usb_gadget_probe_driver);
@@ -2239,7 +2403,7 @@ static int __init fsl_udc_probe(struct p
 	int ret = -ENODEV;
 	unsigned int i;
 	u32 dccparams;
-
+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
 	if (strcmp(pdev->name, driver_name)) {
 		VDBG("Wrong device");
 		return -ENODEV;
@@ -2253,6 +2417,24 @@ static int __init fsl_udc_probe(struct p
 
 	spin_lock_init(&udc_controller->lock);
 	udc_controller->stopped = 1;
+#ifdef CONFIG_COLDFIRE
+	udc_controller->pdata = pdata;
+#endif
+#ifdef CONFIG_USB_OTG
+	/* Memory and interrupt resources will be passed from OTG */
+	udc_controller->transceiver = otg_get_transceiver();
+	if (!udc_controller->transceiver) {
+		printk(KERN_ERR "Can't find OTG driver!\n");
+		ret = -ENODEV;
+		goto err_kfree;
+	}
+
+	res = otg_get_resources();
+	if (!res) {
+		DBG("resource not registered!\n");
+		return -ENODEV;
+	}
+#else
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -2266,18 +2448,30 @@ static int __init fsl_udc_probe(struct p
 		ret = -EBUSY;
 		goto err_kfree;
 	}
-
+#endif
 	dr_regs = ioremap(res->start, resource_size(res));
 	if (!dr_regs) {
 		ret = -ENOMEM;
 		goto err_release_mem_region;
 	}
+#ifdef CONFIG_COLDFIRE
+	pdata->regs = (void *)dr_regs;
+	fsl_set_usb_accessors(pdata);
+
+	/*
+	 * do platform specific init: check the clock, grab/config pins, etc.
+	 */
+	if (pdata->init && pdata->init(pdev)) {
+		ret = -ENODEV;
+		goto err_iounmap_noclk;
+	}
 
+#else
 #ifndef CONFIG_ARCH_MXC
 	usb_sys_regs = (struct usb_sys_interface *)
 			((u32)dr_regs + USB_DR_SYS_OFFSET);
 #endif
-
+#endif
 	/* Initialize USB clocks */
 	ret = fsl_udc_clk_init(pdev);
 	if (ret < 0)
@@ -2293,8 +2487,12 @@ static int __init fsl_udc_probe(struct p
 	/* Get max device endpoints */
 	/* DEN is bidirectional ep number, max_ep doubles the number */
 	udc_controller->max_ep = (dccparams & DCCPARAMS_DEN_MASK) * 2;
-
+#ifdef CONFIG_USB_OTG
+	res++;
+	udc_controller->irq = res->start;
+#else
 	udc_controller->irq = platform_get_irq(pdev, 0);
+#endif
 	if (!udc_controller->irq) {
 		ret = -ENODEV;
 		goto err_iounmap;
@@ -2314,11 +2512,17 @@ static int __init fsl_udc_probe(struct p
 		ret = -ENOMEM;
 		goto err_free_irq;
 	}
-
+#ifdef CONFIG_COLDFIRE
+	if (!udc_controller->transceiver) {
+		/* initialize usb hw reg except for regs for EP,
+		 * leave usbintr reg untouched */
+		dr_controller_setup(udc_controller);
+	}
+#else
 	/* initialize usb hw reg except for regs for EP,
 	 * leave usbintr reg untouched */
 	dr_controller_setup(udc_controller);
-
+#endif
 	fsl_udc_clk_finalize(pdev);
 
 	/* Setup gadget structure */
@@ -2336,7 +2540,10 @@ static int __init fsl_udc_probe(struct p
 	ret = device_register(&udc_controller->gadget.dev);
 	if (ret < 0)
 		goto err_free_irq;
-
+#ifdef CONFIG_COLDFIRE
+	if (udc_controller->transceiver)
+		udc_controller->gadget.is_otg = 1;
+#endif
 	/* setup QH and epctrl for ep0 */
 	ep0_setup(udc_controller);
 
@@ -2392,7 +2599,9 @@ err_kfree:
 static int __exit fsl_udc_remove(struct platform_device *pdev)
 {
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
+#ifdef CONFIG_COLDFIRE
+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
+#endif
 	DECLARE_COMPLETION(done);
 
 	if (!udc_controller)
@@ -2412,31 +2621,103 @@ static int __exit fsl_udc_remove(struct
 	dma_pool_destroy(udc_controller->td_pool);
 	free_irq(udc_controller->irq, udc_controller);
 	iounmap(dr_regs);
+#ifndef CONFIG_USB_OTG
 	release_mem_region(res->start, res->end - res->start + 1);
-
+#endif
 	device_unregister(&udc_controller->gadget.dev);
 	/* free udc --wait for the release() finished */
 	wait_for_completion(&done);
+#ifdef CONFIG_COLDFIRE
+	/*
+	 * do platform specific un-initialization:
+	 * release iomux pins, etc.
+	 */
+	if (pdata->exit)
+		pdata->exit(pdev);
+
+#endif
+	return 0;
+}
+#ifdef CONFIG_COLDFIRE
+
+static int udc_suspend(struct fsl_udc *udc)
+{
+	u32 mode, usbcmd;
+
+	mode = fsl_readl(&dr_regs->usbmode) & USB_MODE_CTRL_MODE_MASK;
+	usbcmd = fsl_readl(&dr_regs->usbcmd);
+
+	pr_debug("%s(): mode 0x%x stopped %d\n", __func__, mode, udc->stopped);
+
+	/*
+	 * If the controller is already stopped, then this must be a
+	 * PM suspend.  Remember this fact, so that we will leave the
+	 * controller stopped at PM resume time.
+	 */
+	if (udc->stopped) {
+		pr_debug("gadget already stopped, leaving early\n");
+		udc->already_stopped = 1;
+		return 0;
+	}
 
+	if (mode != USB_MODE_CTRL_MODE_DEVICE) {
+		pr_debug("gadget not in device mode, leaving early\n");
+		return 0;
+	}
+
+	printk(KERN_INFO "USB Gadget suspended\n");
+
+	/* stop the controller */
+	usbcmd = fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP;
+	fsl_writel(usbcmd, &dr_regs->usbcmd);
+
+	udc->stopped = 1;
 	return 0;
 }
 
+#endif
 /*-----------------------------------------------------------------
  * Modify Power management attributes
  * Used by OTG statemachine to disable gadget temporarily
  -----------------------------------------------------------------*/
+#ifdef CONFIG_COLDFIRE
+static int fsl_udc_suspend(struct device *dev, pm_message_t state)
+#else
 static int fsl_udc_suspend(struct platform_device *pdev, pm_message_t state)
+#endif
 {
+#ifdef CONFIG_COLDFIRE
+	return udc_suspend(udc_controller);
+#else
 	dr_controller_stop(udc_controller);
 	return 0;
+#endif
 }
 
 /*-----------------------------------------------------------------
  * Invoked on USB resume. May be called in_interrupt.
  * Here we start the DR controller and enable the irq
  *-----------------------------------------------------------------*/
+#ifdef CONFIG_COLDFIRE
+static int fsl_udc_resume(struct device *dev)
+#else
 static int fsl_udc_resume(struct platform_device *pdev)
+#endif
 {
+#ifdef CONFIG_COLDFIRE
+	pr_debug("%s(): stopped %d  already_stopped %d\n", __func__,
+		udc_controller->stopped, udc_controller->already_stopped);
+
+	/*
+	 * If the controller was stopped at suspend time, then
+	 * don't resume it now.
+	 */
+	if (udc_controller->already_stopped) {
+		udc_controller->already_stopped = 0;
+		pr_debug("gadget was already stopped, leaving early\n");
+		return 0;
+	}
+#endif
 	/* Enable DR irq reg and set controller Run */
 	if (udc_controller->stopped) {
 		dr_controller_setup(udc_controller);
@@ -2445,6 +2726,9 @@ static int fsl_udc_resume(struct platfor
 	udc_controller->usb_state = USB_STATE_ATTACHED;
 	udc_controller->ep0_state = WAIT_FOR_SETUP;
 	udc_controller->ep0_dir = 0;
+
+	printk(KERN_INFO "USB Gadget resumed\n");
+
 	return 0;
 }
 
@@ -2455,11 +2739,15 @@ static int fsl_udc_resume(struct platfor
 static struct platform_driver udc_driver = {
 	.remove  = __exit_p(fsl_udc_remove),
 	/* these suspend and resume are not usb suspend and resume */
+#ifndef CONFIG_COLDFIRE
 	.suspend = fsl_udc_suspend,
 	.resume  = fsl_udc_resume,
+#endif
 	.driver  = {
 		.name = (char *)driver_name,
 		.owner = THIS_MODULE,
+		.suspend = fsl_udc_suspend,
+		.resume  = fsl_udc_resume,
 	},
 };
 
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -461,6 +461,7 @@ struct fsl_ep {
 struct fsl_udc {
 	struct usb_gadget gadget;
 	struct usb_gadget_driver *driver;
+	struct fsl_usb2_platform_data *pdata;
 	struct completion *done;	/* to make sure release() is done */
 	struct fsl_ep *eps;
 	unsigned int max_ep;
@@ -473,6 +474,7 @@ struct fsl_udc {
 	unsigned vbus_active:1;
 	unsigned stopped:1;
 	unsigned remote_wakeup:1;
+	unsigned already_stopped:1;
 
 	struct ep_queue_head *ep_qh;	/* Endpoints Queue-Head */
 	struct fsl_req *status_req;	/* ep0 status request */
@@ -482,6 +484,7 @@ struct fsl_udc {
 	size_t ep_qh_size;		/* size after alignment adjustment*/
 	dma_addr_t ep_qh_dma;		/* dma address of QH */
 
+	u32 bus_reset;          /* Device is bus reseting */
 	u32 max_pipes;          /* Device max pipes */
 	u32 resume_state;	/* USB state to resume */
 	u32 usb_state;		/* USB current state */
@@ -581,4 +584,17 @@ static inline void fsl_udc_clk_release(v
 }
 #endif
 
+#ifdef CONFIG_COLDFIRE
+#include <asm/mcfsim.h>
+#include <asm/fsl_usb_io.h>
+#include <asm/fsl_usb_gadget.h>
+#include <asm/cf_cacheflush.h>
+
+extern struct resource *otg_get_resources(void);
+#ifdef CONFIG_USB_M5441X_MAX3353_FSLS
+extern int max3353_read_id_pin(void);
+#endif
+
+#endif
+
 #endif
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -4,6 +4,7 @@
  * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
  * Copyright (C) 2008 by David Brownell
  * Copyright (C) 2008 by Nokia Corporation
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
  *
  * This software is distributed under the terms of the GNU General
  * Public License ("GPL") as published by the Free Software Foundation,
@@ -134,7 +135,44 @@ MODULE_PARM_DESC(use_obex, "Use CDC OBEX
 static unsigned n_ports = 1;
 module_param(n_ports, uint, 0);
 MODULE_PARM_DESC(n_ports, "number of ports to create, default=1");
-
+/*-------------------------------------------------------------------------*/
+#if 0
+static void gs_setup_complete_set_line_coding(struct usb_ep *ep,
+		struct usb_request *req)
+{
+	struct gs_dev *dev = ep->driver_data;
+	struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */
+
+	switch (req->status) {
+	case 0:
+		/* normal completion */
+		if (req->actual != sizeof(port->port_line_coding))
+			usb_ep_set_halt(ep);
+		else if (port) {
+			struct usb_cdc_line_coding *value = req->buf;
+
+		/* REVISIT:  we currently just remember this data.
+		 * If we change that, (a) validate it first, then
+		 * (b) update whatever hardware needs updating.
+		 */
+			spin_lock(&port->port_lock);
+			port->port_line_coding = *value;
+			spin_unlock(&port->port_lock);
+		}
+		break;
+
+	case -ESHUTDOWN:
+		/* disconnect */
+		gs_free_req(ep, req);
+		break;
+
+	default:
+		/* unexpected */
+		break;
+	}
+	return;
+}
+#endif
 /*-------------------------------------------------------------------------*/
 
 static int __init serial_bind_config(struct usb_configuration *c)
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -95,13 +95,14 @@ config USB_EHCI_BIG_ENDIAN_MMIO
 	bool
 	depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \
 				    ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
-				    PPC_MPC512x || CPU_CAVIUM_OCTEON)
+				    PPC_MPC512x || CPU_CAVIUM_OCTEON || \
+				    COLDFIRE)
 	default y
 
 config USB_EHCI_BIG_ENDIAN_DESC
 	bool
 	depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
-				    PPC_MPC512x)
+				    PPC_MPC512x || COLDFIRE)
 	default y
 
 config XPS_USB_HCD_XILINX
@@ -120,12 +121,77 @@ config USB_FSL_MPH_DR_OF
 
 config USB_EHCI_FSL
 	bool "Support for Freescale on-chip EHCI USB controller"
-	depends on USB_EHCI_HCD && FSL_SOC
+	depends on USB_EHCI_HCD && (FSL_SOC || COLDFIRE)
 	select USB_EHCI_ROOT_HUB_TT
 	select USB_FSL_MPH_DR_OF if OF
 	---help---
 	  Variation of ARC USB block used in some Freescale chips.
 
+config USB_M5441X_PLLCLK
+	bool "ColdFire USB module use PLL clock source"
+	depends on M5441X
+	---help---
+	  Select USB clock source from PLL instead external USBCLKIN,
+	  to generate the exact USB module 60MHZ clock, the system clock
+	  must be shrink to match the divide requirement which is down
+	  in u-boot.
+
+config USB_M5441X_H1
+	bool "ColdFire EHCI USB Host module support"
+	depends on USB_EHCI_HCD && M5441X
+	---help---
+	  Some ColdFire platform have two USB controllers, one is HOST module,
+	  the other is OTG module, this config select the HOST module support.
+
+choice
+	prompt "Selcet ColdFire HOST module transceiver"
+	depends on USB_M5441X_H1
+	default USB_M5441X_H1_FSLS
+
+config USB_M5441X_H1_FSLS
+	bool "on-chip (FS/LS only)"
+	depends on M5441X
+	---help---
+	  Enable support for the on-chip FS/LS transceiver.
+endchoice
+
+choice
+	prompt "Select ColdiFire OTG module transceiver"
+	depends on M5445X || M5441X
+	default USB_M5445X_ULPI if M5445X
+	default USB_M5441X_ULPI if M5441X
+
+config USB_M5445X_ULPI
+	bool "External ULPI"
+	depends on M5445X
+	---help---
+	  Enable support for the external HS ULPI transceiver.
+
+config USB_M5445X_FSLS
+	bool "On-chip (FL/LS only)"
+	depends on M54455EVB
+	---help---
+	  Enable support for the on-chip FL/LS transceiver.
+
+config USB_M5441X_ULPI
+	bool "External ULPI"
+	depends on M5441X
+	---help---
+	  Enable support for the external HS ULPI transceiver.
+
+config USB_M5441X_FSLS
+	bool "On-chip (FL/LS only)"
+	depends on M54418EVB
+	---help---
+	  Enable support for the on-chip FL/LS transceiver.
+
+config USB_M5441X_MAX3353_FSLS
+        bool "MAX3353 chip charge pump to on-chip (FS/LS only)"
+	depends on M54418EVB
+	---help---
+	  Max3353 provides charge pump for SER1 board on m54418 platform.
+endchoice
+
 config USB_EHCI_MXC
 	bool "Support for Freescale on-chip EHCI USB controller"
 	depends on USB_EHCI_HCD && ARCH_MXC
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -22,16 +22,21 @@
  * Jerry Huang <Chang-Ming.Huang@freescale.com> and
  * Anton Vorontsov <avorontsov@ru.mvista.com>.
  */
-
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/delay.h>
 #include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/fsl_devices.h>
-
+#include <linux/usb/otg.h>
 #include "ehci-fsl.h"
 
+#ifdef DEBUG
+#define DBG(X...) printk(X)
+#else
+#define DBG(X...)
+#endif
+
 /* configure so an HC device and id are always provided */
 /* always called with process context; sleeping is OK */
 
@@ -75,7 +80,27 @@ static int usb_hcd_fsl_probe(const struc
 			dev_name(&pdev->dev));
 		return -ENODEV;
 	}
-
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto err1;
+	}
+#ifdef CONFIG_USB_OTG
+	if (pdata->operating_mode == FSL_USB2_DR_OTG) {
+		res = otg_get_resources();
+		if (!res) {
+			dev_err(&pdev->dev,
+					"Found HC with no IRQ. Check %s setup!\n",
+					dev_name(&pdev->dev));
+			return -ENODEV;
+			goto err2;
+		}
+		irq = res[1].start;
+		hcd->rsrc_start = res[0].start;
+		hcd->rsrc_len = res[0].end - res[0].start + 1;
+	} else
+#endif
+	{
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!res) {
 		dev_err(&pdev->dev,
@@ -85,12 +110,6 @@ static int usb_hcd_fsl_probe(const struc
 	}
 	irq = res->start;
 
-	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
-	if (!hcd) {
-		retval = -ENOMEM;
-		goto err1;
-	}
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(&pdev->dev,
@@ -101,12 +120,15 @@ static int usb_hcd_fsl_probe(const struc
 	}
 	hcd->rsrc_start = res->start;
 	hcd->rsrc_len = res->end - res->start + 1;
+#ifndef CONFIG_USB_OTG
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
 				driver->description)) {
 		dev_dbg(&pdev->dev, "controller already in use\n");
 		retval = -EBUSY;
 		goto err2;
 	}
+#endif
+	}
 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 
 	if (hcd->regs == NULL) {
@@ -124,22 +146,56 @@ static int usb_hcd_fsl_probe(const struc
 		retval = -ENODEV;
 		goto err3;
 	}
-
+#ifndef CONFIG_COLDFIRE
 	/* Enable USB controller, 83xx or 8536 */
 	if (pdata->have_sysif_regs)
 		setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4);
-
+#endif
 	/* Don't need to set host mode here. It will be done by tdi_reset() */
-
+#ifdef CONFIG_COLDFIRE
+	fsl_platform_set_host_mode(hcd);
+	hcd->power_budget = pdata->power_budget;
+#endif
 	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
 	if (retval != 0)
 		goto err4;
+#ifdef CONFIG_COLDFIRE
+	fsl_platform_set_vbus_power(pdata, 1);
+#endif
+#ifdef CONFIG_USB_OTG
+	if (pdata->operating_mode == FSL_USB2_DR_OTG) {
+		struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+		DBG("pdev=0x%p  hcd=0x%p  ehci=0x%p\n", pdev, hcd, ehci);
+
+		ehci->transceiver = otg_get_transceiver();
+		DBG("ehci->transceiver=0x%p\n", ehci->transceiver);
+
+		if (ehci->transceiver) {
+			retval = otg_set_host(ehci->transceiver,
+					&ehci_to_hcd(ehci)->self);
+			if (retval) {
+				printk(KERN_INFO "otg transceiver set host failed\n");
+				if (ehci->transceiver)
+					put_device(ehci->transceiver->dev);
+				goto err4;
+			}
+		} else {
+			printk(KERN_ERR "can't find transceiver\n");
+			retval = -ENODEV;
+			goto err4;
+		}
+	}
+#endif
+
 	return retval;
 
       err4:
 	iounmap(hcd->regs);
       err3:
+#ifndef CONFIG_USB_OTG
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+#endif
       err2:
 	usb_put_hcd(hcd);
       err1:
@@ -164,9 +220,24 @@ static void usb_hcd_fsl_remove(struct us
 			       struct platform_device *pdev)
 {
 	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
+#ifdef CONFIG_COLDFIRE
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 
+	/* DDD shouldn't we turn off the power here? */
+	fsl_platform_set_vbus_power(pdata, 0);
+
+	if (ehci->transceiver) {
+		(void)otg_set_host(ehci->transceiver, 0);
+		put_device(ehci->transceiver->dev);
+	} else {
+		release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	}
+
+
+#endif
 	usb_remove_hcd(hcd);
 
+	usb_put_hcd(hcd);
 	/*
 	 * do platform specific un-initialization:
 	 * release iomux pins, disable clock, etc.
@@ -174,8 +245,6 @@ static void usb_hcd_fsl_remove(struct us
 	if (pdata->exit)
 		pdata->exit(pdev);
 	iounmap(hcd->regs);
-	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-	usb_put_hcd(hcd);
 }
 
 static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
@@ -238,7 +307,7 @@ static void ehci_fsl_usb_setup(struct eh
 	if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
 			(pdata->operating_mode == FSL_USB2_DR_OTG))
 		ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0);
-
+#ifndef CONFIG_COLDFIRE
 	if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
 		unsigned int chip, rev, svr;
 
@@ -255,7 +324,7 @@ static void ehci_fsl_usb_setup(struct eh
 		if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
 			ehci_fsl_setup_phy(ehci, pdata->phy_mode, 1);
 	}
-
+#endif
 	if (pdata->have_sysif_regs) {
 #ifdef CONFIG_PPC_85xx
 		out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x00000008);
@@ -271,7 +340,11 @@ static void ehci_fsl_usb_setup(struct eh
 /* called after powerup, by probe or system-pm "wakeup" */
 static int ehci_fsl_reinit(struct ehci_hcd *ehci)
 {
+#ifdef CONFIG_COLDFIRE
+	fsl_platform_usb_setup(ehci);
+#else
 	ehci_fsl_usb_setup(ehci);
+#endif
 	ehci_port_power(ehci, 0);
 
 	return 0;
@@ -334,7 +407,6 @@ static struct ehci_fsl *hcd_to_ehci_fsl(
 
 	return container_of(ehci, struct ehci_fsl, ehci);
 }
-
 static int ehci_fsl_drv_suspend(struct device *dev)
 {
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
@@ -371,7 +443,6 @@ static int ehci_fsl_drv_resume(struct de
 
 	return 0;
 }
-
 static int ehci_fsl_drv_restore(struct device *dev)
 {
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
@@ -387,6 +458,144 @@ static struct dev_pm_ops ehci_fsl_pm_ops
 };
 
 #define EHCI_FSL_PM_OPS		(&ehci_fsl_pm_ops)
+
+/* suspend/resume, section 4.3 */
+
+/* These routines rely on the bus (pci, platform, etc)
+ * to handle powerdown and wakeup, and currently also on
+ * transceivers that don't need any software attention to set up
+ * the right sort of wakeup.
+ *
+ * They're also used for turning on/off the port when doing OTG.
+ */
+static int ehci_fsl_suspend(struct device *dev,
+		pm_message_t message)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	u32 tmp;
+	struct fsl_usb2_platform_data *pdata = dev->platform_data;
+
+#ifdef DEBUG
+	u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE);
+	mode &= USBMODE_CM_MASK;
+	tmp = ehci_readl(ehci, hcd->regs + 0x140);      /* usbcmd */
+
+	DBG(KERN_DEBUG "%s('%s'): suspend=%d already_suspended=%d "
+			"mode=%d  usbcmd %08x\n", __func__, pdata->name,
+			pdata->suspended, pdata->already_suspended, mode, tmp);
+#endif
+	/*
+	 * If the controller is already suspended, then this must be a
+	 * PM suspend.  Remember this fact, so that we will leave the
+	 * controller suspended at PM resume time.
+	 */
+	if (pdata->suspended) {
+		pr_debug("%s: already suspended, leaving early\n", __func__);
+		pdata->already_suspended = 1;
+		return 0;
+	}
+
+	pr_debug("%s: suspending...\n", __func__);
+
+	DBG(KERN_INFO "USB Host suspended\n");
+
+	hcd->state = HC_STATE_SUSPENDED;
+	dev->power.power_state = PMSG_SUSPEND;
+
+	/* ignore non-host interrupts */
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	/* stop the controller */
+	tmp = ehci_readl(ehci, &ehci->regs->command);
+	tmp &= ~CMD_RUN;
+	ehci_writel(ehci, tmp, &ehci->regs->command);
+
+	/* save EHCI registers */
+	pdata->pm_command = ehci_readl(ehci, &ehci->regs->command);
+	pdata->pm_command &= ~CMD_RUN;
+	pdata->pm_status  = ehci_readl(ehci, &ehci->regs->status);
+	pdata->pm_intr_enable  = ehci_readl(ehci, &ehci->regs->intr_enable);
+	pdata->pm_frame_index  = ehci_readl(ehci, &ehci->regs->frame_index);
+	pdata->pm_segment  = ehci_readl(ehci, &ehci->regs->segment);
+	pdata->pm_frame_list  = ehci_readl(ehci, &ehci->regs->frame_list);
+	pdata->pm_async_next  = ehci_readl(ehci, &ehci->regs->async_next);
+	pdata->pm_configured_flag  =
+		ehci_readl(ehci, &ehci->regs->configured_flag);
+	pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
+
+	/* clear the W1C bits */
+	pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS);
+
+	pdata->suspended = 1;
+#if 0
+	/* clear PP to cut power to the port */
+	tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
+	tmp &= ~PORT_POWER;
+	ehci_writel(ehci, tmp, &ehci->regs->port_status[0]);
+#endif
+	return 0;
+}
+
+static int ehci_fsl_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	u32 tmp;
+	struct fsl_usb2_platform_data *pdata = dev->platform_data;
+
+	pr_debug("%s('%s'): suspend=%d already_suspended=%d\n", __func__,
+		pdata->name, pdata->suspended, pdata->already_suspended);
+
+	/*
+	 * If the controller was already suspended at suspend time,
+	 * then don't resume it now.
+	 */
+	if (pdata->already_suspended) {
+		pr_debug("already suspended, leaving early\n");
+		pdata->already_suspended = 0;
+		return 0;
+	}
+
+	if (!pdata->suspended) {
+		pr_debug("not suspended, leaving early\n");
+		return 0;
+	}
+
+	DBG(KERN_INFO "USB Host resumed\n");
+
+	pdata->suspended = 0;
+
+	pr_debug("%s resuming...\n", __func__);
+
+	/* set host mode */
+	fsl_platform_set_host_mode(hcd);
+
+
+	/* restore EHCI registers */
+	ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
+	ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable);
+	ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index);
+	ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment);
+	ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list);
+	ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next);
+	ehci_writel(ehci, pdata->pm_configured_flag,
+			&ehci->regs->configured_flag);
+	ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]);
+
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	hcd->state = HC_STATE_RUNNING;
+	dev->power.power_state = PMSG_ON;
+
+	tmp = ehci_readl(ehci, &ehci->regs->command);
+	tmp |= CMD_RUN;
+	ehci_writel(ehci, tmp, &ehci->regs->command);
+
+	usb_hcd_resume_root_hub(hcd);
+
+	return 0;
+}
+
 #else
 #define EHCI_FSL_PM_OPS		NULL
 #endif /* CONFIG_PM */
@@ -431,7 +640,11 @@ static const struct hc_driver ehci_fsl_h
 	.bus_suspend = ehci_bus_suspend,
 	.bus_resume = ehci_bus_resume,
 	.relinquish_port = ehci_relinquish_port,
+#ifndef CONFIG_COLDFIRE
 	.port_handed_over = ehci_port_handed_over,
+#else
+	.start_port_reset = ehci_start_port_reset,
+#endif
 
 	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 };
@@ -460,8 +673,16 @@ static struct platform_driver ehci_fsl_d
 	.probe = ehci_fsl_drv_probe,
 	.remove = ehci_fsl_drv_remove,
 	.shutdown = usb_hcd_platform_shutdown,
+#ifdef CONFIG_PM
+#ifndef CONFIG_COLDFIRE
+	.suspend = ehci_fsl_suspend,
+	.resume = ehci_fsl_resume,
+#endif
+#endif
 	.driver = {
 		.name = "fsl-ehci",
 		.pm = EHCI_FSL_PM_OPS,
+		.suspend = ehci_fsl_suspend,
+		.resume = ehci_fsl_resume,
 	},
 };
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -42,4 +42,11 @@
 #define FSL_SOC_USB_SICTRL	0x410	/* NOTE: big-endian */
 #define FSL_SOC_USB_CTRL	0x500	/* NOTE: big-endian */
 #define SNOOP_SIZE_2GB		0x1e
+
+#ifdef CONFIG_COLDFIRE
+#define FSL_SOC_USB_USBMODE    0x1a8
+
+#include <asm/fsl_usb_platform.h>
+#include <asm/fsl_usb_io.h>
+#endif
 #endif				/* _EHCI_FSL_H */
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (C) 2001-2004 by David Brownell
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -41,6 +42,39 @@ static int ehci_hub_control(
 	u16		wLength
 );
 
+#ifdef CONFIG_COLDFIRE
+
+#ifdef CONFIG_USB_OTG
+static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	u32 status;
+
+	if (!port)
+		return -EINVAL;
+	port--;
+
+	/* start port reset before HNP protocol time out */
+	status = readl(&ehci->regs->port_status[port]);
+	if (!(status & PORT_CONNECT))
+		return -ENODEV;
+
+	/* khubd will finish the reset later */
+	if (ehci_is_TDI(ehci))
+		writel(PORT_RESET | (status & ~(PORT_CSC | PORT_PEC
+				| PORT_OCC)), &ehci->regs->port_status[port]);
+	else
+		writel(PORT_RESET, &ehci->regs->port_status[port]);
+
+	return 0;
+}
+#else
+static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port)
+{
+	return 0;
+}
+#endif /* CONFIG_USB_OTG */
+#endif
 /* After a power loss, ports that were owned by the companion must be
  * reset so that the companion can still own them.
  */
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -1,6 +1,7 @@
 /*
  * Copyright (c) 2001-2002 by David Brownell
- *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * 
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
@@ -147,7 +148,9 @@ struct ehci_hcd {			/* one per controlle
 	unsigned		has_lpm:1;  /* support link power management */
 	unsigned		has_ppcd:1; /* support per-port change bits */
 	u8			sbrn;		/* packed release number */
-
+#if defined(CONFIG_COLDFIRE)
+	struct otg_transceiver  *transceiver;
+#endif
 	/* irq statistics */
 #ifdef EHCI_STATS
 	struct ehci_stats	stats;
@@ -617,6 +620,54 @@ ehci_port_speed(struct ehci_hcd *ehci, u
 #define writel_be(val, addr)	__raw_writel(val, (__force unsigned *)addr)
 #endif
 
+#if defined(CONFIG_COLDFIRE)
+
+#if defined(CONFIG_MMU)
+#include <asm/fsl_usb_io.h>
+/*
+ * Sorry, include/asm-m68k/io.h is messed up.  It will give you a
+ * BE readl or a LE readl depending on whether or not CONFIG_PCI is set.
+ * how broken is that?  Do the right thing here.
+ */
+#undef readl
+#undef writel
+
+#define readl(addr)            in_le32((__force unsigned *)(addr))
+#define writel(val, addr)       out_le32((__force unsigned *)(addr), (val))
+
+#define readl_be(addr)         in_be32((__force unsigned *)(addr))
+#define writel_be(val, addr)   out_be32((__force unsigned *)(addr), (val))
+
+#else /* !CONFIG_MMU */
+
+#define readl_be(addr) \
+		({u32 __v = (*(__force volatile u32 *)addr); __v; })
+#define writel_be(val, addr) \
+		(void)((*(__force volatile u32 *)addr) = val)
+
+#ifndef in_be32
+#define in_be32(addr) \
+		({ u32 __v = (*(__force volatile u32 *)(addr)); __v; })
+#endif
+
+#ifndef in_le32
+#define in_le32(addr) \
+	({ u32 __v = le32_to_cpu(*(__force volatile __le32 *)(addr)); __v; })
+#endif
+
+#ifndef out_be32
+#define out_be32(addr, l) (void)((*(__force volatile u32 *)(addr)) = (l))
+#endif
+
+#ifndef out_le32
+#define out_le32(addr, l) \
+	(void)((*(__force volatile __le32 *)(addr)) = cpu_to_le32(l))
+#endif
+
+#endif
+
+#endif /* CONFIG_COLDFIRE */
+
 static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
 		__u32 __iomem * regs)
 {
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -18,3 +18,10 @@ obj-$(CONFIG_NOP_USB_XCEIV)	+= nop-usb-x
 obj-$(CONFIG_USB_ULPI)		+= ulpi.o
 obj-$(CONFIG_USB_MSM_OTG_72K)	+= msm72k_otg.o
 obj-$(CONFIG_AB8500_USB)	+= ab8500-usb.o
+
+obj-$(CONFIG_USB_OTG)           += usb.o
+fsl_usb2_otg-objs               := fsl_otg.o otg_fsm.o
+#ifneq ($(CONFIG_USB_OTG),)
+ifneq ($(CONFIG_USB_OTG),)
+obj-m                           += fsl_usb2_otg.o
+endif
--- /dev/null
+++ b/drivers/usb/otg/fsl_otg.c
@@ -0,0 +1,1212 @@
+/*
+ * Copyright 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Li Yang <LeoLi@freescale.com>
+ *         Jerry Huang <Chang-Ming.Huang@freescale.com>
+ *
+ * Initialization based on code from Shlomi Gridish.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/proc_fs.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/reboot.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/workqueue.h>
+#include <linux/time.h>
+#include <linux/fsl_devices.h>
+#include <linux/platform_device.h>
+
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/byteorder.h>
+#include <linux/uaccess.h>
+#include <asm/unaligned.h>
+
+#include "fsl_otg.h"
+
+/*
+#undef DBG
+#undef VDBG
+#define DBG(x...) printk(x)
+#define VDBG(x...) printk(x)
+*/
+
+#define CONFIG_USB_OTG_DEBUG_FILES
+#define DRIVER_VERSION "$Revision: 1.55 $"
+#define DRIVER_AUTHOR "Jerry Huang/Li Yang"
+#define DRIVER_DESC "Freescale USB OTG Driver"
+#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
+
+MODULE_DESCRIPTION("Freescale USB OTG Transceiver Driver");
+
+static const char driver_name[] = "fsl-usb2-otg";
+
+const pm_message_t otg_suspend_state = {
+	.event = 1,
+};
+
+#define HA_DATA_PULSE 1
+
+volatile static struct usb_dr_mmap *usb_dr_regs;
+static struct fsl_otg *fsl_otg_dev;
+static int srp_wait_done;
+
+/* FSM timers */
+struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr,
+	*b_ase0_brst_tmr, *b_se0_srp_tmr;
+
+/* Driver specific timers */
+struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr,
+	*b_srp_wait_tmr, *a_wait_enum_tmr;
+
+static struct list_head active_timers;
+
+static struct fsl_otg_config fsl_otg_initdata = {
+	.otg_port = 1,
+};
+
+/* Routines to access transceiver ULPI registers */
+u8 view_ulpi(u8 addr)
+{
+	u32 temp;
+
+	temp = 0x40000000 | (addr << 16);
+	temp = cpu_to_le32(temp);
+	fsl_writel(temp, &usb_dr_regs->ulpiview);
+	udelay(1000);
+	while (temp & 0x40)
+		temp = fsl_readl(&usb_dr_regs->ulpiview);
+	return (le32_to_cpu(temp) & 0x0000ff00) >> 8;
+}
+
+int write_ulpi(u8 addr, u8 data)
+{
+	u32 temp;
+
+	temp = 0x60000000 | (addr << 16) | data;
+	temp = cpu_to_hc32(temp);
+	fsl_writel(temp, &usb_dr_regs->ulpiview);
+	return 0;
+}
+
+/* -------------------------------------------------------------*/
+/* Operations that will be called from OTG Finite State Machine */
+
+/* Charge vbus for vbus pulsing in SRP */
+void fsl_otg_chrg_vbus(int on)
+{
+	u32 tmp;
+
+	tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
+
+	if (on)
+		/* stop discharging, start charging */
+		tmp = (tmp & ~OTGSC_CTRL_VBUS_DISCHARGE) |
+			OTGSC_CTRL_VBUS_CHARGE;
+	else
+		/* stop charging */
+		tmp &= ~OTGSC_CTRL_VBUS_CHARGE;
+
+	fsl_writel(tmp, &usb_dr_regs->otgsc);
+}
+
+/* Discharge vbus through a resistor to ground */
+void fsl_otg_dischrg_vbus(int on)
+{
+	u32 tmp;
+
+	tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
+
+	if (on)
+		/* stop charging, start discharging */
+		tmp = (tmp & ~OTGSC_CTRL_VBUS_CHARGE) |
+			OTGSC_CTRL_VBUS_DISCHARGE;
+	else
+		/* stop discharging */
+		tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE;
+
+	fsl_writel(tmp, &usb_dr_regs->otgsc);
+}
+
+/* A-device driver vbus, controlled through PP bit in PORTSC */
+void fsl_otg_drv_vbus(int on)
+{
+/*	if (on)
+		usb_dr_regs->portsc =
+		    cpu_to_le32((le32_to_cpu(usb_dr_regs->portsc) &
+				 ~PORTSC_W1C_BITS) | PORTSC_PORT_POWER);
+	else
+		usb_dr_regs->portsc =
+		    cpu_to_le32(le32_to_cpu(usb_dr_regs->portsc) &
+				~PORTSC_W1C_BITS & ~PORTSC_PORT_POWER);
+*/
+}
+
+/*
+ * Pull-up D+, signalling connect by periperal. Also used in
+ * data-line pulsing in SRP
+ */
+void fsl_otg_loc_conn(int on)
+{
+	u32 tmp;
+
+	tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
+
+	if (on)
+		tmp |= OTGSC_CTRL_DATA_PULSING;
+	else
+		tmp &= ~OTGSC_CTRL_DATA_PULSING;
+
+	fsl_writel(tmp, &usb_dr_regs->otgsc);
+}
+
+/* Generate SOF by host.  This is controlled through suspend/resume the
+ * port.  In host mode, controller will automatically send SOF.
+ * Suspend will block the data on the port.
+ */
+void fsl_otg_loc_sof(int on)
+{
+	u32 tmp;
+
+	tmp = fsl_readl(&fsl_otg_dev->dr_mem_map->portsc) & ~PORTSC_W1C_BITS;
+	if (on)
+		tmp |= PORTSC_PORT_FORCE_RESUME;
+	else
+		tmp |= PORTSC_PORT_SUSPEND;
+
+	fsl_writel(tmp, &fsl_otg_dev->dr_mem_map->portsc);
+
+}
+
+/* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */
+void fsl_otg_start_pulse(void)
+{
+	u32 tmp;
+
+	srp_wait_done = 0;
+#ifdef HA_DATA_PULSE
+	tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
+	tmp |= OTGSC_HA_DATA_PULSE;
+	fsl_writel(tmp, &usb_dr_regs->otgsc);
+#else
+	fsl_otg_loc_conn(1);
+#endif
+
+	fsl_otg_add_timer(b_data_pulse_tmr);
+}
+
+void fsl_otg_pulse_vbus(void);
+
+void b_data_pulse_end(unsigned long foo)
+{
+#ifdef HA_DATA_PULSE
+#else
+	fsl_otg_loc_conn(0);
+#endif
+
+	/* Do VBUS pulse after data pulse */
+	fsl_otg_pulse_vbus();
+}
+
+void fsl_otg_pulse_vbus(void)
+{
+	srp_wait_done = 0;
+	fsl_otg_chrg_vbus(1);
+	/* start the timer to end vbus charge */
+	fsl_otg_add_timer(b_vbus_pulse_tmr);
+}
+
+void b_vbus_pulse_end(unsigned long foo)
+{
+	fsl_otg_chrg_vbus(0);
+
+	/* As USB3300 using the same a_sess_vld and b_sess_vld voltage
+	 * we need to discharge the bus for a while to distinguish
+	 * residual voltage of vbus pulsing and A device pull up */
+	fsl_otg_dischrg_vbus(1);
+	fsl_otg_add_timer(b_srp_wait_tmr);
+}
+
+void b_srp_end(unsigned long foo)
+{
+	fsl_otg_dischrg_vbus(0);
+	srp_wait_done = 1;
+
+	if ((fsl_otg_dev->otg.state == OTG_STATE_B_SRP_INIT) &&
+	    fsl_otg_dev->fsm.b_sess_vld)
+		fsl_otg_dev->fsm.b_srp_done = 1;
+}
+
+/* Workaround for a_host suspending too fast.  When a_bus_req=0,
+ * a_host will start by SRP.  It needs to set b_hnp_enable before
+ * actually suspending to start HNP
+ */
+void a_wait_enum(unsigned long foo)
+{
+	VDBG("a_wait_enum timeout\n");
+	if (!fsl_otg_dev->otg.host->b_hnp_enable)
+		fsl_otg_add_timer(a_wait_enum_tmr);
+	else
+		otg_statemachine(&fsl_otg_dev->fsm);
+}
+
+/* ------------------------------------------------------*/
+
+/* The timeout callback function to set time out bit */
+void set_tmout(unsigned long indicator)
+{
+	*(int *)indicator = 1;
+}
+
+/* Initialize timers */
+int fsl_otg_init_timers(struct otg_fsm *fsm)
+{
+	/* FSM used timers */
+	a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
+				(unsigned long)&fsm->a_wait_vrise_tmout);
+	if (a_wait_vrise_tmr == NULL)
+		return -ENOMEM;
+
+	a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON,
+				(unsigned long)&fsm->a_wait_bcon_tmout);
+	if (a_wait_bcon_tmr == NULL)
+		return -ENOMEM;
+
+	a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
+				(unsigned long)&fsm->a_aidl_bdis_tmout);
+	if (a_aidl_bdis_tmr == NULL)
+		return -ENOMEM;
+
+	b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST,
+				(unsigned long)&fsm->b_ase0_brst_tmout);
+	if (b_ase0_brst_tmr == NULL)
+		return -ENOMEM;
+
+	b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
+				(unsigned long)&fsm->b_se0_srp);
+	if (b_se0_srp_tmr == NULL)
+		return -ENOMEM;
+
+	b_srp_fail_tmr = otg_timer_initializer(&set_tmout, TB_SRP_FAIL,
+				(unsigned long)&fsm->b_srp_done);
+	if (b_srp_fail_tmr == NULL)
+		return -ENOMEM;
+
+	a_wait_enum_tmr = otg_timer_initializer(&a_wait_enum, 10,
+				(unsigned long)&fsm);
+	if (a_wait_enum_tmr == NULL)
+		return -ENOMEM;
+
+	/* device driver used timers */
+	b_srp_wait_tmr = otg_timer_initializer(&b_srp_end, TB_SRP_WAIT, 0);
+	if (b_srp_wait_tmr == NULL)
+		return -ENOMEM;
+
+	b_data_pulse_tmr = otg_timer_initializer(&b_data_pulse_end,
+				TB_DATA_PLS, 0);
+	if (b_data_pulse_tmr == NULL)
+		return -ENOMEM;
+
+	b_vbus_pulse_tmr = otg_timer_initializer(&b_vbus_pulse_end,
+				TB_VBUS_PLS, 0);
+	if (b_vbus_pulse_tmr == NULL)
+		return -ENOMEM;
+
+	return 0;
+}
+
+/* Uninitialize timers */
+void fsl_otg_uninit_timers(void)
+{
+	/* FSM used timers */
+	if (a_wait_vrise_tmr != NULL)
+		kfree(a_wait_vrise_tmr);
+	if (a_wait_bcon_tmr != NULL)
+		kfree(a_wait_bcon_tmr);
+	if (a_aidl_bdis_tmr != NULL)
+		kfree(a_aidl_bdis_tmr);
+	if (b_ase0_brst_tmr != NULL)
+		kfree(b_ase0_brst_tmr);
+	if (b_se0_srp_tmr != NULL)
+		kfree(b_se0_srp_tmr);
+	if (b_srp_fail_tmr != NULL)
+		kfree(b_srp_fail_tmr);
+	if (a_wait_enum_tmr != NULL)
+		kfree(a_wait_enum_tmr);
+
+	/* device driver used timers */
+	if (b_srp_wait_tmr != NULL)
+		kfree(b_srp_wait_tmr);
+	if (b_data_pulse_tmr != NULL)
+		kfree(b_data_pulse_tmr);
+	if (b_vbus_pulse_tmr != NULL)
+		kfree(b_vbus_pulse_tmr);
+}
+
+/* Add timer to timer list */
+void fsl_otg_add_timer(void *gtimer)
+{
+	struct fsl_otg_timer *timer = (struct fsl_otg_timer *)gtimer;
+	struct fsl_otg_timer *tmp_timer;
+
+	/* Check if the timer is already in the active list,
+	 * if so update timer count
+	 */
+	list_for_each_entry(tmp_timer, &active_timers, list)
+	    if (tmp_timer == timer) {
+		timer->count = timer->expires;
+		return;
+	}
+	timer->count = timer->expires;
+	list_add_tail(&timer->list, &active_timers);
+}
+
+/* Remove timer from the timer list; clear timeout status */
+void fsl_otg_del_timer(void *gtimer)
+{
+	struct fsl_otg_timer *timer = (struct fsl_otg_timer *)gtimer;
+	struct fsl_otg_timer *tmp_timer, *del_tmp;
+
+	list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
+		if (tmp_timer == timer)
+			list_del(&timer->list);
+}
+
+/* Reduce timer count by 1, and find timeout conditions.
+ * Called by fsl_otg 1ms timer interrupt
+ */
+int fsl_otg_tick_timer(void)
+{
+	struct fsl_otg_timer *tmp_timer, *del_tmp;
+	int expired = 0;
+
+	list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
+		tmp_timer->count--;
+		/* check if timer expires */
+		if (!tmp_timer->count) {
+			list_del(&tmp_timer->list);
+			tmp_timer->function(tmp_timer->data);
+			expired = 1;
+		}
+	}
+
+	return expired;
+}
+
+/* Reset controller, not reset the bus */
+void otg_reset_controller(void)
+{
+	u32 command;
+
+	command = fsl_readl(&usb_dr_regs->usbcmd);
+	command |= (1 << 1);
+	fsl_writel(command, &usb_dr_regs->usbcmd);
+	while (fsl_readl(&usb_dr_regs->usbcmd) & (1 << 1))
+		;
+}
+
+/* Call suspend/resume routines in host driver */
+int fsl_otg_start_host(struct otg_fsm *fsm, int on)
+{
+	struct otg_transceiver *xceiv = fsm->transceiver;
+	struct device *dev;
+	struct fsl_otg *otg_dev = container_of(xceiv, struct fsl_otg, otg);
+	u32 retval = 0;
+
+	if (!xceiv->host)
+		return -ENODEV;
+	dev = xceiv->host->controller;
+
+	/* Update a_vbus_vld state as a_vbus_vld int is disabled
+	 * in device mode
+	 */
+	fsm->a_vbus_vld =
+		!!(fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_A_VBUS_VALID);
+	if (on) {
+		/* start fsl usb host controller */
+		if (otg_dev->host_working)
+			goto end;
+		else {
+			otg_reset_controller();
+			VDBG("host on......\n");
+			if (dev->driver->resume) {
+				retval = dev->driver->resume(dev);
+				if (fsm->id) {
+					/* default-b */
+					fsl_otg_drv_vbus(1);
+					/* Workaround: b_host can't driver
+					 * vbus, but PP in PORTSC needs to
+					 * be 1 for host to work.
+					 * So we set drv_vbus bit in
+					 * transceiver to 0 thru ULPI. */
+					write_ulpi(0x0c, 0x20);
+				}
+			}
+
+			otg_dev->host_working = 1;
+		}
+	} else {
+		/* stop fsl usb host controller */
+		if (!otg_dev->host_working)
+			goto end;
+		else {
+			VDBG("host off......\n");
+			if (dev && dev->driver) {
+				retval = dev->driver->suspend(dev,
+							otg_suspend_state);
+				if (fsm->id)
+					/* default-b */
+					fsl_otg_drv_vbus(0);
+			}
+			otg_dev->host_working = 0;
+		}
+	}
+end:
+	return retval;
+}
+
+/* Call suspend and resume function in udc driver
+ * to stop and start udc driver.
+ */
+int fsl_otg_start_gadget(struct otg_fsm *fsm, int on)
+{
+	struct otg_transceiver *xceiv = fsm->transceiver;
+	struct device *dev;
+
+	if (!xceiv->gadget || !xceiv->gadget->dev.parent)
+		return -ENODEV;
+
+	VDBG("gadget %s\n", on ? "on" : "off");
+	dev = xceiv->gadget->dev.parent;
+
+	if (on)
+		dev->driver->resume(dev);
+	else
+		dev->driver->suspend(dev, otg_suspend_state);
+
+	return 0;
+}
+
+/* Called by initialization code of host driver.  Register host controller
+ * to the OTG.  Suspend host for OTG role detection.
+ */
+static int fsl_otg_set_host(struct otg_transceiver *otg_p, struct usb_bus *host)
+{
+	struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
+
+	if (!otg_p || otg_dev != fsl_otg_dev)
+		return -ENODEV;
+
+	DBG("%s\n", __func__);
+	otg_p->host = host;
+
+	otg_dev->fsm.a_bus_drop = 0;
+	otg_dev->fsm.a_bus_req = 1;
+
+	if (host) {
+		VDBG("host off......\n");
+
+		otg_p->host->otg_port = fsl_otg_initdata.otg_port;
+		otg_p->host->is_b_host = otg_dev->fsm.id;
+		/* must leave time for khubd to finish its thing
+		 * before yanking the host driver out from under it,
+		 * so suspend the host after a short delay.
+		 */
+		otg_dev->host_working = 1;
+		schedule_delayed_work(&otg_dev->otg_event, 100);
+		return 0;
+	} else {		/* host driver going away */
+
+		if (!(fsl_readl(&otg_dev->dr_mem_map->otgsc) &
+		      OTGSC_STS_USB_ID)) {
+			/* Mini-A cable connected */
+			struct otg_fsm *fsm = &otg_dev->fsm;
+
+			otg_p->state = OTG_STATE_UNDEFINED;
+			fsm->protocol = PROTO_UNDEF;
+		}
+	}
+
+	otg_dev->host_working = 0;
+
+	otg_statemachine(&otg_dev->fsm);
+
+	return 0;
+}
+
+/* Called by initialization code of udc.  Register udc to OTG.*/
+static int fsl_otg_set_peripheral(struct otg_transceiver *otg_p,
+				  struct usb_gadget *gadget)
+{
+	struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
+
+	DBG("%s\n", __func__);
+	VDBG("otg_dev 0x%x\n", (int)otg_dev);
+	VDBG("fsl_otg_dev 0x%x\n", (int)fsl_otg_dev);
+
+	if (!otg_p || otg_dev != fsl_otg_dev)
+		return -ENODEV;
+
+	if (!gadget) {
+		if (!otg_dev->otg.default_a)
+			otg_p->gadget->ops->vbus_draw(otg_p->gadget, 0);
+		usb_gadget_vbus_disconnect(otg_dev->otg.gadget);
+		otg_dev->otg.gadget = 0;
+		otg_dev->fsm.b_bus_req = 0;
+		otg_statemachine(&otg_dev->fsm);
+		return 0;
+	}
+
+	otg_p->gadget = gadget;
+	otg_p->gadget->is_a_peripheral = !otg_dev->fsm.id;
+
+	otg_dev->fsm.b_bus_req = 1;
+
+	/* start the gadget right away if the ID pin says Mini-B */
+	DBG("ID pin=%d\n", otg_dev->fsm.id);
+	if (otg_dev->fsm.id == 1) {
+		fsl_otg_start_host(&otg_dev->fsm, 0);
+		otg_drv_vbus(&otg_dev->fsm, 0);
+		fsl_otg_start_gadget(&otg_dev->fsm, 1);
+	}
+
+	return 0;
+}
+
+/* Set OTG port power, only for B-device */
+static int fsl_otg_set_power(struct otg_transceiver *otg_p, unsigned mA)
+{
+	if (!fsl_otg_dev)
+		return -ENODEV;
+	if (otg_p->state == OTG_STATE_B_PERIPHERAL)
+		printk(KERN_INFO "FSL OTG:Draw %d mA\n", mA);
+
+	return 0;
+}
+
+/* Delayed pin detect interrupt processing.
+ *
+ * When the Mini-A cable is disconnected from the board,
+ * the pin-detect interrupt happens before the disconnnect
+ * interrupts for the connected device(s).  In order to
+ * process the disconnect interrupt(s) prior to switching
+ * roles, the pin-detect interrupts are delayed, and handled
+ * by this routine.
+ */
+static void fsl_otg_event(struct work_struct *work)
+{
+	struct fsl_otg *og = container_of(work, struct fsl_otg, otg_event.work);
+	struct otg_fsm *fsm = &og->fsm;
+
+	if (fsm->id) {		/* switch to gadget */
+		fsl_otg_start_host(fsm, 0);
+		otg_drv_vbus(fsm, 0);
+		fsl_otg_start_gadget(fsm, 1);
+	}
+}
+
+/* B-device start SRP */
+static int fsl_otg_start_srp(struct otg_transceiver *otg_p)
+{
+	struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
+
+	if (!otg_p || otg_dev != fsl_otg_dev
+	    || otg_p->state != OTG_STATE_B_IDLE)
+		return -ENODEV;
+
+	otg_dev->fsm.b_bus_req = 1;
+	otg_statemachine(&otg_dev->fsm);
+
+	return 0;
+}
+
+/* A_host suspend will call this function to start hnp */
+static int fsl_otg_start_hnp(struct otg_transceiver *otg_p)
+{
+	struct fsl_otg *otg_dev = container_of(otg_p, struct fsl_otg, otg);
+
+	if (!otg_p || otg_dev != fsl_otg_dev)
+		return -ENODEV;
+
+	/* printk("start_hnp.............\n"); */
+	/* clear a_bus_req to enter a_suspend state */
+	otg_dev->fsm.a_bus_req = 0;
+	otg_statemachine(&otg_dev->fsm);
+
+	return 0;
+}
+
+/* Interrupt handler.  OTG/host/peripheral share the same int line.
+ * OTG driver clears OTGSC interrupts and leaves USB interrupts
+ * intact.  It needs to have knowledge of some USB interrupts
+ * such as port change.
+ */
+irqreturn_t fsl_otg_isr(int irq, void *dev_id)
+{
+	struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm;
+	struct otg_transceiver *otg = &((struct fsl_otg *)dev_id)->otg;
+	u32 otg_int_src, otg_sc;
+
+	otg_sc = fsl_readl(&usb_dr_regs->otgsc);
+	otg_int_src = otg_sc & OTGSC_INTSTS_MASK;
+
+	/* Only clear otg interrupts */
+	fsl_writel(otg_sc, &usb_dr_regs->otgsc);
+
+	/*FIXME: ID change not generate when init to 0 */
+	fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
+	otg->default_a = (fsm->id == 0);
+
+	/* process OTG interrupts */
+	if (otg_int_src) {
+		if (otg_int_src & OTGSC_INTSTS_USB_ID) {
+			fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
+			otg->default_a = (fsm->id == 0);
+			/* clear conn information */
+			if (fsm->id)
+				fsm->b_conn = 0;
+			else
+				fsm->a_conn = 0;
+
+			if (otg->host)
+				otg->host->is_b_host = fsm->id;
+			if (otg->gadget)
+				otg->gadget->is_a_peripheral = !fsm->id;
+			VDBG("ID int (ID is %d)\n", fsm->id);
+
+			if (fsm->id) {	/* switch to gadget */
+				schedule_delayed_work(&((struct fsl_otg *)
+						dev_id)->otg_event, 100);
+			} else {	/* switch to host */
+				cancel_delayed_work(&
+						    ((struct fsl_otg *)dev_id)->
+						    otg_event);
+				fsl_otg_start_gadget(fsm, 0);
+				otg_drv_vbus(fsm, 1);
+				fsl_otg_start_host(fsm, 1);
+			}
+			return IRQ_HANDLED;
+		}
+	}
+	return IRQ_NONE;
+}
+
+static struct otg_fsm_ops fsl_otg_ops = {
+	.chrg_vbus = fsl_otg_chrg_vbus,
+	.drv_vbus = fsl_otg_drv_vbus,
+	.loc_conn = fsl_otg_loc_conn,
+	.loc_sof = fsl_otg_loc_sof,
+	.start_pulse = fsl_otg_start_pulse,
+
+	.add_timer = fsl_otg_add_timer,
+	.del_timer = fsl_otg_del_timer,
+
+	.start_host = fsl_otg_start_host,
+	.start_gadget = fsl_otg_start_gadget,
+};
+
+/* Initialize the global variable fsl_otg_dev and request IRQ for OTG */
+static int fsl_otg_conf(struct platform_device *pdev)
+{
+	int status;
+	struct fsl_otg *fsl_otg_tc;
+	struct fsl_usb2_platform_data *pdata;
+
+	pdata = pdev->dev.platform_data;
+
+	if (fsl_otg_dev)
+		return 0;
+
+	/* allocate space to fsl otg device */
+	fsl_otg_tc = kzalloc(sizeof(struct fsl_otg), GFP_KERNEL);
+	if (!fsl_otg_tc)
+		return -ENODEV;
+
+	INIT_DELAYED_WORK(&fsl_otg_tc->otg_event, fsl_otg_event);
+
+	INIT_LIST_HEAD(&active_timers);
+	status = fsl_otg_init_timers(&fsl_otg_tc->fsm);
+	if (status) {
+		printk(KERN_INFO "Couldn't init OTG timers\n");
+		fsl_otg_uninit_timers();
+		kfree(fsl_otg_tc);
+		return status;
+	}
+	spin_lock_init(&fsl_otg_tc->fsm.lock);
+
+	/* Set OTG state machine operations */
+	fsl_otg_tc->fsm.ops = &fsl_otg_ops;
+
+	/* initialize the otg structure */
+	fsl_otg_tc->otg.label = DRIVER_DESC;
+	fsl_otg_tc->otg.set_host = fsl_otg_set_host;
+	fsl_otg_tc->otg.set_peripheral = fsl_otg_set_peripheral;
+	fsl_otg_tc->otg.set_power = fsl_otg_set_power;
+	fsl_otg_tc->otg.start_hnp = fsl_otg_start_hnp;
+	fsl_otg_tc->otg.start_srp = fsl_otg_start_srp;
+
+	fsl_otg_dev = fsl_otg_tc;
+
+	/* Store the otg transceiver */
+	status = otg_set_transceiver(&fsl_otg_tc->otg);
+	if (status) {
+		printk(KERN_WARNING ": unable to register OTG transceiver.\n");
+		return status;
+	}
+
+	return 0;
+}
+
+/* OTG Initialization*/
+int usb_otg_start(struct platform_device *pdev)
+{
+	struct fsl_otg __iomem *p_otg;
+	struct otg_transceiver *otg_trans = otg_get_transceiver();
+	struct otg_fsm *fsm;
+	volatile unsigned long *p;
+	int status;
+	struct resource *res;
+	u32 temp;
+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
+
+	p_otg = container_of(otg_trans, struct fsl_otg, otg);
+	fsm = &p_otg->fsm;
+
+	/* Initialize the state machine structure with default values */
+	SET_OTG_STATE(otg_trans, OTG_STATE_UNDEFINED);
+	fsm->transceiver = &p_otg->otg;
+
+	/* We don't require predefined MEM/IRQ resource index */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENXIO;
+
+	/* We don't request_mem_region here to enable resource sharing
+	 * with host/device */
+
+	usb_dr_regs = ioremap(res->start, sizeof(struct usb_dr_mmap));
+	p_otg->dr_mem_map = (struct usb_dr_mmap *)usb_dr_regs;
+	pdata->regs = (void *)usb_dr_regs;
+
+	/* request irq */
+	p_otg->irq = platform_get_irq(pdev, 0);
+	status = request_irq(p_otg->irq, fsl_otg_isr,
+				IRQF_SHARED, driver_name, p_otg);
+	if (status) {
+		dev_dbg(p_otg->otg.dev, "can't get IRQ %d, error %d\n",
+			p_otg->irq, status);
+		iounmap(p_otg->dr_mem_map);
+		kfree(p_otg);
+		return status;
+	}
+
+	if (pdata->init && pdata->init(pdev) != 0)
+		return -EINVAL;
+
+
+	/* Export DR controller resources */
+	otg_set_resources(pdev->resource);
+
+	/* stop the controller */
+	temp = fsl_readl(&p_otg->dr_mem_map->usbcmd);
+	temp &= ~USB_CMD_RUN_STOP;
+	fsl_writel(temp, &p_otg->dr_mem_map->usbcmd);
+
+	/* reset the controller */
+	temp = fsl_readl(&p_otg->dr_mem_map->usbcmd);
+	temp |= USB_CMD_CTRL_RESET;
+	fsl_writel(temp, &p_otg->dr_mem_map->usbcmd);
+
+	/* wait reset completed */
+	udelay(2);
+	while (fsl_readl(&p_otg->dr_mem_map->usbcmd) & USB_CMD_CTRL_RESET)
+		;
+
+	/* configure the VBUSHS as IDLE(both host and device) */
+	temp = USB_MODE_STREAM_DISABLE | (pdata->es ? USB_MODE_ES : 0);
+	fsl_writel(temp, &p_otg->dr_mem_map->usbmode);
+
+	/* configure PHY interface */
+	temp = fsl_readl(&p_otg->dr_mem_map->portsc);
+	temp &= ~(PORTSC_PHY_TYPE_SEL | PORTSC_PTW);
+	switch (pdata->phy_mode) {
+	case FSL_USB2_PHY_ULPI:
+		temp |= PORTSC_PTS_ULPI;
+		break;
+	case FSL_USB2_PHY_UTMI_WIDE:
+		temp |= PORTSC_PTW_16BIT;
+		/* fall through */
+	case FSL_USB2_PHY_UTMI:
+		temp |= PORTSC_PTS_UTMI;
+		/* fall through */
+	default:
+		break;
+	}
+	fsl_writel(temp, &p_otg->dr_mem_map->portsc);
+
+	if (pdata->have_sysif_regs) {
+		/* configure control enable IO output, big endian register */
+		p = (volatile unsigned long *)(&p_otg->dr_mem_map->control);
+		temp = *p;
+		temp |= USB_CTRL_IOENB;
+		*p = temp;
+	}
+
+	/* disable all interrupt and clear all OTGSC status */
+	temp = fsl_readl(&p_otg->dr_mem_map->otgsc);
+	temp &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK;
+	temp |= OTGSC_INTERRUPT_STATUS_BITS_MASK | OTGSC_CTRL_VBUS_DISCHARGE;
+	fsl_writel(temp, &p_otg->dr_mem_map->otgsc);
+
+
+	/*
+	 * The identification (id) input is FALSE when a Mini-A plug is inserted
+	 * in the devices Mini-AB receptacle. Otherwise, this input is TRUE.
+	 * Also: record initial state of ID pin
+	 */
+	if (fsl_readl(&p_otg->dr_mem_map->otgsc) & OTGSC_STS_USB_ID) {
+		p_otg->otg.state = OTG_STATE_UNDEFINED;
+		p_otg->fsm.id = 1;
+	} else {
+		p_otg->otg.state = OTG_STATE_A_IDLE;
+		p_otg->fsm.id = 0;
+	}
+
+	DBG("initial ID pin=%d\n", p_otg->fsm.id);
+
+	/* enable OTG ID pin interrupt */
+	temp = fsl_readl(&p_otg->dr_mem_map->otgsc);
+	temp |= OTGSC_INTR_USB_ID_EN;
+	temp &= ~(OTGSC_CTRL_VBUS_DISCHARGE | OTGSC_INTR_1MS_TIMER_EN);
+	fsl_writel(temp, &p_otg->dr_mem_map->otgsc);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------
+		PROC File System Support
+-------------------------------------------------------------------------*/
+#ifdef CONFIG_USB_OTG_DEBUG_FILES
+
+#include <linux/seq_file.h>
+
+static const char proc_filename[] = "driver/fsl_usb2_otg";
+
+static int otg_proc_read(char *page, char **start, off_t off, int count,
+			 int *eof, void *_dev)
+{
+	struct otg_fsm *fsm = &fsl_otg_dev->fsm;
+	char *buf = page;
+	char *next = buf;
+	unsigned size = count;
+	unsigned long flags;
+	int t;
+	u32 tmp_reg;
+
+	if (off != 0)
+		return 0;
+
+	spin_lock_irqsave(&fsm->lock, flags);
+
+	/* ------basic driver infomation ---- */
+	t = scnprintf(next, size,
+		      DRIVER_DESC "\n" "fsl_usb2_otg version: %s\n\n",
+		      DRIVER_VERSION);
+	size -= t;
+	next += t;
+
+	/* ------ Registers ----- */
+	tmp_reg = fsl_readl(&usb_dr_regs->otgsc);
+	t = scnprintf(next, size, "OTGSC reg: %08x\n", tmp_reg);
+	size -= t;
+	next += t;
+
+	tmp_reg = fsl_readl(&usb_dr_regs->portsc);
+	t = scnprintf(next, size, "PORTSC reg: %08x\n", tmp_reg);
+	size -= t;
+	next += t;
+
+	tmp_reg = fsl_readl(&usb_dr_regs->usbmode);
+	t = scnprintf(next, size, "USBMODE reg: %08x\n", tmp_reg);
+	size -= t;
+	next += t;
+
+	tmp_reg = fsl_readl(&usb_dr_regs->usbcmd);
+	t = scnprintf(next, size, "USBCMD reg: %08x\n", tmp_reg);
+	size -= t;
+	next += t;
+
+	tmp_reg = fsl_readl(&usb_dr_regs->usbsts);
+	t = scnprintf(next, size, "USBSTS reg: %08x\n", tmp_reg);
+	size -= t;
+	next += t;
+
+	tmp_reg = fsl_readl(&usb_dr_regs->usbintr);
+	t = scnprintf(next, size, "USBINTR reg: %08x\n", tmp_reg);
+	size -= t;
+	next += t;
+
+	/* ------ State ----- */
+	t = scnprintf(next, size,
+		      "OTG state: %s\n\n",
+		      state_string(fsl_otg_dev->otg.state));
+	size -= t;
+	next += t;
+
+	/* ------ State Machine Variables ----- */
+	t = scnprintf(next, size, "a_bus_req: %d\n", fsm->a_bus_req);
+	size -= t;
+	next += t;
+
+	t = scnprintf(next, size, "b_bus_req: %d\n", fsm->b_bus_req);
+	size -= t;
+	next += t;
+
+	t = scnprintf(next, size, "a_bus_resume: %d\n", fsm->a_bus_resume);
+	size -= t;
+	next += t;
+
+	t = scnprintf(next, size, "a_bus_suspend: %d\n", fsm->a_bus_suspend);
+	size -= t;
+	next += t;
+
+	t = scnprintf(next, size, "a_conn: %d\n", fsm->a_conn);
+	size -= t;
+	next += t;
+
+	t = scnprintf(next, size, "a_sess_vld: %d\n", fsm->a_sess_vld);
+	size -= t;
+	next += t;
+
+	t = scnprintf(next, size, "a_srp_det: %d\n", fsm->a_srp_det);
+	size -= t;
+	next += t;
+
+	t = scnprintf(next, size, "a_vbus_vld: %d\n", fsm->a_vbus_vld);
+	size -= t;
+	next += t;
+
+	t = scnprintf(next, size, "b_bus_resume: %d\n", fsm->b_bus_resume);
+	size -= t;
+	next += t;
+
+	t = scnprintf(next, size, "b_bus_suspend: %d\n", fsm->b_bus_suspend);
+	size -= t;
+	next += t;
+
+	t = scnprintf(next, size, "b_conn: %d\n", fsm->b_conn);
+	size -= t;
+	next += t;
+
+	t = scnprintf(next, size, "b_se0_srp: %d\n", fsm->b_se0_srp);
+	size -= t;
+	next += t;
+
+	t = scnprintf(next, size, "b_sess_end: %d\n", fsm->b_sess_end);
+	size -= t;
+	next += t;
+
+	t = scnprintf(next, size, "b_sess_vld: %d\n", fsm->b_sess_vld);
+	size -= t;
+	next += t;
+
+	t = scnprintf(next, size, "id: %d\n", fsm->id);
+	size -= t;
+	next += t;
+
+	spin_unlock_irqrestore(&fsm->lock, flags);
+
+	*eof = 1;
+	return count - size;
+}
+
+#define create_proc_file()	create_proc_read_entry(proc_filename, \
+				0, NULL, otg_proc_read, NULL)
+
+#define remove_proc_file()	remove_proc_entry(proc_filename, NULL)
+
+#else				/* !CONFIG_USB_OTG_DEBUG_FILES */
+
+#define create_proc_file()	do {} while (0)
+#define remove_proc_file()	do {} while (0)
+
+#endif				/*CONFIG_USB_OTG_DEBUG_FILES */
+
+/*----------------------------------------------------------*/
+/* Char driver interface to control some OTG input */
+
+/* This function handle some ioctl command,such as get otg
+ * status and set host suspend
+ */
+static long fsl_otg_ioctl(struct file *file,
+			 unsigned int cmd, unsigned long arg)
+{
+	u32 retval = 0;
+
+	switch (cmd) {
+	case GET_OTG_STATUS:
+		retval = fsl_otg_dev->host_working;
+		break;
+
+	case SET_A_SUSPEND_REQ:
+		fsl_otg_dev->fsm.a_suspend_req = arg;
+		break;
+
+	case SET_A_BUS_DROP:
+		fsl_otg_dev->fsm.a_bus_drop = arg;
+		break;
+
+	case SET_A_BUS_REQ:
+		fsl_otg_dev->fsm.a_bus_req = arg;
+		break;
+
+	case SET_B_BUS_REQ:
+		fsl_otg_dev->fsm.b_bus_req = arg;
+		break;
+
+	default:
+		break;
+	}
+
+	otg_statemachine(&fsl_otg_dev->fsm);
+
+	return retval;
+}
+
+static int fsl_otg_open(struct inode *inode, struct file *file)
+{
+
+	return 0;
+}
+
+static int fsl_otg_release(struct inode *inode, struct file *file)
+{
+
+	return 0;
+}
+
+static struct file_operations otg_fops = {
+	.owner = THIS_MODULE,
+	.llseek = NULL,
+	.read = NULL,
+	.write = NULL,
+	.unlocked_ioctl = fsl_otg_ioctl,
+	.open = fsl_otg_open,
+	.release = fsl_otg_release,
+};
+
+static int __init fsl_otg_probe(struct platform_device *pdev)
+{
+	int status;
+	struct fsl_usb2_platform_data *pdata;
+
+	DBG("pdev=0x%p\n", pdev);
+
+	if (!pdev)
+		return -ENODEV;
+
+	if (!pdev->dev.platform_data)
+		return -ENOMEM;
+
+	pdata = pdev->dev.platform_data;
+	fsl_set_usb_accessors(pdata);
+
+	/* configure the OTG */
+	status = fsl_otg_conf(pdev);
+	if (status) {
+		printk(KERN_INFO "Couldn't init OTG module\n");
+		return -status;
+	}
+
+	/* start OTG */
+	status = usb_otg_start(pdev);
+
+	if (register_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME, &otg_fops)) {
+		printk(KERN_WARNING FSL_OTG_NAME
+		       ": unable to register FSL OTG device\n");
+		return -EIO;
+	}
+
+	create_proc_file();
+	return status;
+}
+
+static int __exit fsl_otg_remove(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
+
+	otg_set_transceiver(NULL);
+	free_irq(fsl_otg_dev->irq, fsl_otg_dev);
+
+	iounmap((void *)usb_dr_regs);
+
+	kfree(fsl_otg_dev);
+
+	remove_proc_file();
+
+	unregister_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME);
+
+	if (pdata->exit)
+		pdata->exit(pdev);
+
+	return 0;
+}
+
+struct platform_driver fsl_otg_driver = {
+	.probe = fsl_otg_probe,
+	.remove = __exit_p(fsl_otg_remove),
+	.driver = {
+		.name = driver_name,
+		.owner = THIS_MODULE,
+	},
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init fsl_usb_otg_init(void)
+{
+	printk(KERN_INFO DRIVER_DESC " loaded, %s\n", DRIVER_VERSION);
+	return platform_driver_register(&fsl_otg_driver);
+}
+
+static void __exit fsl_usb_otg_exit(void)
+{
+	platform_driver_unregister(&fsl_otg_driver);
+	printk(KERN_INFO DRIVER_DESC " unloaded\n");
+}
+
+module_init(fsl_usb_otg_init);
+module_exit(fsl_usb_otg_exit);
+
+MODULE_DESCRIPTION(DRIVER_INFO);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/drivers/usb/otg/fsl_otg.h
@@ -0,0 +1,423 @@
+/* Copyright 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "otg_fsm.h"
+#include <linux/usb/otg.h>
+#include <linux/ioctl.h>
+
+#ifdef CONFIG_PPC32
+#include <asm/fsl_usb_io.h>
+#elif CONFIG_COLDFIRE
+#include <asm/mcfsim.h>
+#include <asm/fsl_usb_io.h>
+#endif
+
+#define hc32_to_cpu(x) (x)
+#define cpu_to_hc32(x) (x)
+
+ /* USB Command  Register Bit Masks */
+#define USB_CMD_RUN_STOP		(0x1<<0)
+#define USB_CMD_CTRL_RESET		(0x1<<1)
+#define USB_CMD_PERIODIC_SCHEDULE_EN	(0x1<<4)
+#define USB_CMD_ASYNC_SCHEDULE_EN	(0x1<<5)
+#define USB_CMD_INT_AA_DOORBELL		(0x1<<6)
+#define USB_CMD_ASP			(0x3<<8)
+#define USB_CMD_ASYNC_SCH_PARK_EN	(0x1<<11)
+#define USB_CMD_SUTW			(0x1<<13)
+#define USB_CMD_ATDTW			(0x1<<14)
+#define USB_CMD_ITC			(0xFF<<16)
+
+/* bit 15,3,2 are frame list size */
+#define USB_CMD_FRAME_SIZE_1024		(0x0<<15 | 0x0<<2)
+#define USB_CMD_FRAME_SIZE_512		(0x0<<15 | 0x1<<2)
+#define USB_CMD_FRAME_SIZE_256		(0x0<<15 | 0x2<<2)
+#define USB_CMD_FRAME_SIZE_128		(0x0<<15 | 0x3<<2)
+#define USB_CMD_FRAME_SIZE_64		(0x1<<15 | 0x0<<2)
+#define USB_CMD_FRAME_SIZE_32		(0x1<<15 | 0x1<<2)
+#define USB_CMD_FRAME_SIZE_16		(0x1<<15 | 0x2<<2)
+#define USB_CMD_FRAME_SIZE_8		(0x1<<15 | 0x3<<2)
+
+/* bit 9-8 are async schedule park mode count */
+#define USB_CMD_ASP_00			(0x0<<8)
+#define USB_CMD_ASP_01			(0x1<<8)
+#define USB_CMD_ASP_10			(0x2<<8)
+#define USB_CMD_ASP_11			(0x3<<8)
+#define USB_CMD_ASP_BIT_POS		(8)
+
+/* bit 23-16 are interrupt threshold control */
+#define USB_CMD_ITC_NO_THRESHOLD	(0x00<<16)
+#define USB_CMD_ITC_1_MICRO_FRM		(0x01<<16)
+#define USB_CMD_ITC_2_MICRO_FRM		(0x02<<16)
+#define USB_CMD_ITC_4_MICRO_FRM		(0x04<<16)
+#define USB_CMD_ITC_8_MICRO_FRM		(0x08<<16)
+#define USB_CMD_ITC_16_MICRO_FRM	(0x10<<16)
+#define USB_CMD_ITC_32_MICRO_FRM	(0x20<<16)
+#define USB_CMD_ITC_64_MICRO_FRM	(0x40<<16)
+#define USB_CMD_ITC_BIT_POS		(16)
+
+/* USB Status Register Bit Masks */
+#define USB_STS_INT			(0x1<<0)
+#define USB_STS_ERR			(0x1<<1)
+#define USB_STS_PORT_CHANGE		(0x1<<2)
+#define USB_STS_FRM_LST_ROLL		(0x1<<3)
+#define USB_STS_SYS_ERR			(0x1<<4)
+#define USB_STS_IAA			(0x1<<5)
+#define USB_STS_RESET_RECEIVED		(0x1<<6)
+#define USB_STS_SOF			(0x1<<7)
+#define USB_STS_DCSUSPEND		(0x1<<8)
+#define USB_STS_HC_HALTED		(0x1<<12)
+#define USB_STS_RCL			(0x1<<13)
+#define USB_STS_PERIODIC_SCHEDULE	(0x1<<14)
+#define USB_STS_ASYNC_SCHEDULE		(0x1<<15)
+
+/* USB Interrupt Enable Register Bit Masks */
+#define USB_INTR_INT_EN			(0x1<<0)
+#define USB_INTR_ERR_INT_EN		(0x1<<1)
+#define USB_INTR_PC_DETECT_EN		(0x1<<2)
+#define USB_INTR_FRM_LST_ROLL_EN	(0x1<<3)
+#define USB_INTR_SYS_ERR_EN		(0x1<<4)
+#define USB_INTR_ASYN_ADV_EN		(0x1<<5)
+#define USB_INTR_RESET_EN		(0x1<<6)
+#define USB_INTR_SOF_EN			(0x1<<7)
+#define USB_INTR_DEVICE_SUSPEND		(0x1<<8)
+
+/* Device Address bit masks */
+#define USB_DEVICE_ADDRESS_MASK		(0x7F<<25)
+#define USB_DEVICE_ADDRESS_BIT_POS	(25)
+/* PORTSC  Register Bit Masks,Only one PORT in OTG mode*/
+#define PORTSC_CURRENT_CONNECT_STATUS	(0x1<<0)
+#define PORTSC_CONNECT_STATUS_CHANGE	(0x1<<1)
+#define PORTSC_PORT_ENABLE		(0x1<<2)
+#define PORTSC_PORT_EN_DIS_CHANGE	(0x1<<3)
+#define PORTSC_OVER_CURRENT_ACT		(0x1<<4)
+#define PORTSC_OVER_CUURENT_CHG		(0x1<<5)
+#define PORTSC_PORT_FORCE_RESUME	(0x1<<6)
+#define PORTSC_PORT_SUSPEND		(0x1<<7)
+#define PORTSC_PORT_RESET		(0x1<<8)
+#define PORTSC_LINE_STATUS_BITS		(0x3<<10)
+#define PORTSC_PORT_POWER		(0x1<<12)
+#define PORTSC_PORT_INDICTOR_CTRL	(0x3<<14)
+#define PORTSC_PORT_TEST_CTRL		(0xF<<16)
+#define PORTSC_WAKE_ON_CONNECT_EN	(0x1<<20)
+#define PORTSC_WAKE_ON_CONNECT_DIS	(0x1<<21)
+#define PORTSC_WAKE_ON_OVER_CURRENT	(0x1<<22)
+#define PORTSC_PHY_LOW_POWER_SPD	(0x1<<23)
+#define PORTSC_PORT_FORCE_FULL_SPEED	(0x1<<24)
+#define PORTSC_PORT_SPEED_MASK		(0x3<<26)
+#define PORTSC_TRANSCEIVER_WIDTH	(0x1<<28)
+#define PORTSC_PHY_TYPE_SEL		(0x3<<30)
+/* bit 11-10 are line status */
+#define PORTSC_LINE_STATUS_SE0		(0x0<<10)
+#define PORTSC_LINE_STATUS_JSTATE	(0x1<<10)
+#define PORTSC_LINE_STATUS_KSTATE	(0x2<<10)
+#define PORTSC_LINE_STATUS_UNDEF	(0x3<<10)
+#define PORTSC_LINE_STATUS_BIT_POS	(10)
+
+/* bit 15-14 are port indicator control */
+#define PORTSC_PIC_OFF			(0x0<<14)
+#define PORTSC_PIC_AMBER		(0x1<<14)
+#define PORTSC_PIC_GREEN		(0x2<<14)
+#define PORTSC_PIC_UNDEF		(0x3<<14)
+#define PORTSC_PIC_BIT_POS		(14)
+
+/* bit 19-16 are port test control */
+#define PORTSC_PTC_DISABLE		(0x0<<16)
+#define PORTSC_PTC_JSTATE		(0x1<<16)
+#define PORTSC_PTC_KSTATE		(0x2<<16)
+#define PORTSC_PTC_SEQNAK		(0x3<<16)
+#define PORTSC_PTC_PACKET		(0x4<<16)
+#define PORTSC_PTC_FORCE_EN		(0x5<<16)
+#define PORTSC_PTC_BIT_POS		(16)
+
+/* bit 27-26 are port speed */
+#define PORTSC_PORT_SPEED_FULL		(0x0<<26)
+#define PORTSC_PORT_SPEED_LOW		(0x1<<26)
+#define PORTSC_PORT_SPEED_HIGH		(0x2<<26)
+#define PORTSC_PORT_SPEED_UNDEF		(0x3<<26)
+#define PORTSC_SPEED_BIT_POS		(26)
+
+/* bit 28 is parallel transceiver width for UTMI interface */
+#define PORTSC_PTW			(0x1<<28)
+#define PORTSC_PTW_8BIT			(0x0<<28)
+#define PORTSC_PTW_16BIT		(0x1<<28)
+
+/* bit 31-30 are port transceiver select */
+#define PORTSC_PTS_UTMI			(0x0<<30)
+#define PORTSC_PTS_ULPI			(0x2<<30)
+#define PORTSC_PTS_FSLS_SERIAL		(0x3<<30)
+#define PORTSC_PTS_BIT_POS		(30)
+
+#define PORTSC_W1C_BITS                    \
+	(PORTSC_CONNECT_STATUS_CHANGE |     \
+	PORTSC_PORT_EN_DIS_CHANGE    |     \
+	PORTSC_OVER_CUURENT_CHG)
+
+/* OTG Status Control Register Bit Masks */
+#define OTGSC_CTRL_VBUS_DISCHARGE	(0x1<<0)
+#define OTGSC_CTRL_VBUS_CHARGE		(0x1<<1)
+#define OTGSC_CTRL_OTG_TERMINATION	(0x1<<3)
+#define OTGSC_CTRL_DATA_PULSING		(0x1<<4)
+#define OTGSC_CTRL_ID_PULL_EN		(0x1<<5)
+#define OTGSC_HA_DATA_PULSE		(0x1<<6)
+#define OTGSC_HA_BA			(0x1<<7)
+#define OTGSC_STS_USB_ID		(0x1<<8)
+#define OTGSC_STS_A_VBUS_VALID		(0x1<<9)
+#define OTGSC_STS_A_SESSION_VALID	(0x1<<10)
+#define OTGSC_STS_B_SESSION_VALID	(0x1<<11)
+#define OTGSC_STS_B_SESSION_END		(0x1<<12)
+#define OTGSC_STS_1MS_TOGGLE		(0x1<<13)
+#define OTGSC_STS_DATA_PULSING		(0x1<<14)
+#define OTGSC_INTSTS_USB_ID		(0x1<<16)
+#define OTGSC_INTSTS_A_VBUS_VALID	(0x1<<17)
+#define OTGSC_INTSTS_A_SESSION_VALID	(0x1<<18)
+#define OTGSC_INTSTS_B_SESSION_VALID	(0x1<<19)
+#define OTGSC_INTSTS_B_SESSION_END	(0x1<<20)
+#define OTGSC_INTSTS_1MS		(0x1<<21)
+#define OTGSC_INTSTS_DATA_PULSING	(0x1<<22)
+#define OTGSC_INTR_USB_ID_EN		(0x1<<24)
+#define OTGSC_INTR_A_VBUS_VALID_EN	(0x1<<25)
+#define OTGSC_INTR_A_SESSION_VALID_EN	(0x1<<26)
+#define OTGSC_INTR_B_SESSION_VALID_EN	(0x1<<27)
+#define OTGSC_INTR_B_SESSION_END_EN	(0x1<<28)
+#define OTGSC_INTR_1MS_TIMER_EN		(0x1<<29)
+#define OTGSC_INTR_DATA_PULSING_EN	(0x1<<30)
+#define OTGSC_INTSTS_MASK		(0x00ff0000)
+
+/* USB MODE Register Bit Masks */
+#define  USB_MODE_CTRL_MODE_IDLE	(0x0<<0)
+#define  USB_MODE_CTRL_MODE_DEVICE	(0x2<<0)
+#define  USB_MODE_CTRL_MODE_HOST	(0x3<<0)
+#define  USB_MODE_CTRL_MODE_RSV		(0x1<<0)
+#define  USB_MODE_SETUP_LOCK_OFF	(0x1<<3)
+#define  USB_MODE_STREAM_DISABLE	(0x1<<4)
+#define  USB_MODE_ES			(0x1<<2) /* (big) Endian Select */
+
+#define MPC8349_OTG_IRQ			(38)
+#define CFG_IMMR_BASE			(0xfe000000)
+#define MPC83xx_USB_DR_BASE		(CFG_IMMR_BASE + 0x23000)
+
+/* control Register Bit Masks */
+#define  USB_CTRL_IOENB			(0x1<<2)
+#define  USB_CTRL_ULPI_INT0EN		(0x1<<0)
+
+/* BCSR5 */
+#define BCSR5_INT_USB			(0x02)
+
+/* USB module clk cfg */
+#define SCCR_OFFS			(0xA08)
+#define SCCR_USB_CLK_DISABLE		(0x00000000)	/* USB clk disable */
+#define SCCR_USB_MPHCM_11		(0x00c00000)
+#define SCCR_USB_MPHCM_01		(0x00400000)
+#define SCCR_USB_MPHCM_10		(0x00800000)
+#define SCCR_USB_DRCM_11		(0x00300000)
+#define SCCR_USB_DRCM_01		(0x00100000)
+#define SCCR_USB_DRCM_10		(0x00200000)
+
+#define SICRL_OFFS			(0x114)
+#define SICRL_USB0			(0x40000000)
+#define SICRL_USB1			(0x20000000)
+
+#define SICRH_OFFS			(0x118)
+#define SICRH_USB_UTMI			(0x00020000)
+
+/* OTG interrupt enable bit masks */
+#define  OTGSC_INTERRUPT_ENABLE_BITS_MASK  \
+	(OTGSC_INTR_USB_ID_EN            | \
+	OTGSC_INTR_1MS_TIMER_EN		 | \
+	OTGSC_INTR_A_VBUS_VALID_EN       | \
+	OTGSC_INTR_A_SESSION_VALID_EN    | \
+	OTGSC_INTR_B_SESSION_VALID_EN    | \
+	OTGSC_INTR_B_SESSION_END_EN      | \
+	OTGSC_INTR_DATA_PULSING_EN)
+
+/* OTG interrupt status bit masks */
+#define  OTGSC_INTERRUPT_STATUS_BITS_MASK  \
+	(OTGSC_INTSTS_USB_ID          |    \
+	OTGSC_INTR_1MS_TIMER_EN       |    \
+	OTGSC_INTSTS_A_VBUS_VALID     |    \
+	OTGSC_INTSTS_A_SESSION_VALID  |    \
+	OTGSC_INTSTS_B_SESSION_VALID  |    \
+	OTGSC_INTSTS_B_SESSION_END    |    \
+	OTGSC_INTSTS_DATA_PULSING)
+
+/*
+ *  A-DEVICE timing  constants
+ */
+
+/* Wait for VBUS Rise  */
+#define TA_WAIT_VRISE	(100)	/* a_wait_vrise 100 ms, section: 6.6.5.1 */
+
+/* Wait for B-Connect */
+#define TA_WAIT_BCON	(10000)  /* a_wait_bcon > 1 sec, section: 6.6.5.2
+				  * This is only used to get out of
+				  * OTG_STATE_A_WAIT_BCON state if there was
+				  * no connection for these many milliseconds
+				  */
+
+/* A-Idle to B-Disconnect */
+/* It is necessary for this timer to be more than 750 ms because of a bug in OPT
+ * test 5.4 in which B OPT disconnects after 750 ms instead of 75ms as stated
+ * in the test description
+ */
+#define TA_AIDL_BDIS	(5000)	/* a_suspend minimum 200 ms, section: 6.6.5.3 */
+
+/* B-Idle to A-Disconnect */
+#define TA_BIDL_ADIS	(12)	/* 3 to 200 ms */
+
+/* B-device timing constants */
+
+
+/* Data-Line Pulse Time*/
+#define TB_DATA_PLS	(10)	/* b_srp_init,continue 5~10ms, section:5.3.3 */
+#define TB_DATA_PLS_MIN	(5)	/* minimum 5 ms */
+#define TB_DATA_PLS_MAX	(10)	/* maximum 10 ms */
+
+/* SRP Initiate Time  */
+#define TB_SRP_INIT	(100)	/* b_srp_init,maximum 100 ms, section:5.3.8 */
+
+/* SRP Fail Time  */
+#define TB_SRP_FAIL	(7000)	/* b_srp_init,Fail time 5~30s, section:6.8.2.2*/
+
+/* SRP result wait time */
+#define TB_SRP_WAIT	(60)
+
+/* VBus time */
+#define TB_VBUS_PLS	(30)	/* time to keep vbus pulsing asserted */
+
+/* Discharge time */
+/* This time should be less than 10ms. It varies from system to system. */
+#define TB_VBUS_DSCHRG	(8)
+
+/* A-SE0 to B-Reset  */
+#define TB_ASE0_BRST	(20)	/* b_wait_acon, mini 3.125 ms,section:6.8.2.4 */
+
+/* A bus suspend timer before we can switch to b_wait_aconn */
+#define TB_A_SUSPEND	(7)
+#define TB_BUS_RESUME	(12)
+
+/* SE0 Time Before SRP */
+#define TB_SE0_SRP	(2)	/* b_idle,minimum 2 ms, section:5.3.2 */
+
+
+#define SET_OTG_STATE(otg_ptr, newstate)	((otg_ptr)->state = newstate)
+
+struct usb_dr_mmap {
+	/* Capability register */
+	u8 res1[256];
+	u16 caplength;		/* Capability Register Length */
+	u16 hciversion;		/* Host Controller Interface Version */
+	u32 hcsparams;		/* Host Controller Structual Parameters */
+	u32 hccparams;		/* Host Controller Capability Parameters */
+	u8 res2[20];
+	u32 dciversion;		/* Device Controller Interface Version */
+	u32 dccparams;		/* Device Controller Capability Parameters */
+	u8 res3[24];
+	/* Operation register */
+	u32 usbcmd;		/* USB Command Register */
+	u32 usbsts;		/* USB Status Register */
+	u32 usbintr;		/* USB Interrupt Enable Register */
+	u32 frindex;		/* Frame Index Register */
+	u8 res4[4];
+	u32 deviceaddr;		/* Device Address */
+	u32 endpointlistaddr;	/* Endpoint List Address Register */
+	u8 res5[4];
+	u32 burstsize;		/* Master Interface Data Burst Size Register */
+	u32 txttfilltuning;	/* Transmit FIFO Tuning Controls Register */
+	u8 res6[8];
+	u32 ulpiview;		/* ULPI register access */
+	u8 res7[12];
+	u32 configflag;		/* Configure Flag Register */
+	u32 portsc;		/* Port 1 Status and Control Register */
+	u8 res8[28];
+	u32 otgsc;		/* On-The-Go Status and Control */
+	u32 usbmode;		/* USB Mode Register */
+	u32 endptsetupstat;	/* Endpoint Setup Status Register */
+	u32 endpointprime;	/* Endpoint Initialization Register */
+	u32 endptflush;		/* Endpoint Flush Register */
+	u32 endptstatus;	/* Endpoint Status Register */
+	u32 endptcomplete;	/* Endpoint Complete Register */
+	u32 endptctrl[6];	/* Endpoint Control Registers */
+	u8 res9[552];
+	u32 snoop1;
+	u32 snoop2;
+	u32 age_cnt_thresh;	/* Age Count Threshold Register */
+	u32 pri_ctrl;		/* Priority Control Register */
+	u32 si_ctrl;		/* System Interface Control Register */
+	u8 res10[236];
+	u32 control;		/* General Purpose Control Register */
+};
+
+
+struct fsl_otg_timer {
+	unsigned long expires;	/* Number of count increase to timeout */
+	unsigned long count;	/* Tick counter */
+	void (*function)(unsigned long);	/* Timeout function */
+	unsigned long data;	/* Data passed to function */
+	struct list_head list;
+};
+
+static inline struct fsl_otg_timer *otg_timer_initializer
+(void (*function)(unsigned long), unsigned long expires, unsigned long data)
+{
+	struct fsl_otg_timer *timer;
+	timer = kmalloc(sizeof(struct fsl_otg_timer), GFP_KERNEL);
+	if (timer == NULL)
+		return NULL;
+	timer->function = function;
+	timer->expires = expires;
+	timer->data = data;
+	return timer;
+}
+
+struct fsl_otg {
+	struct otg_transceiver otg;
+	struct otg_fsm fsm;
+	struct usb_dr_mmap __iomem *dr_mem_map;
+	struct delayed_work otg_event;
+
+	/* used for usb host */
+	struct work_struct work_wq;
+	u8	host_working;
+
+	int irq;
+};
+
+struct fsl_otg_config {
+	u8 otg_port;
+};
+
+/*For SRP and HNP handle*/
+#define FSL_OTG_MAJOR	66
+#define FSL_OTG_NAME	"fsl-usb2-otg"
+/*Command to OTG driver(ioctl)*/
+#define OTG_IOCTL_MAGIC		FSL_OTG_MAJOR
+/*if otg work as host,it should return 1,otherwise it return 0*/
+#define GET_OTG_STATUS		_IOR(OTG_IOCTL_MAGIC, 1, int)
+#define SET_A_SUSPEND_REQ	_IOW(OTG_IOCTL_MAGIC, 2, int)
+#define SET_A_BUS_DROP		_IOW(OTG_IOCTL_MAGIC, 3, int)
+#define SET_A_BUS_REQ		_IOW(OTG_IOCTL_MAGIC, 4, int)
+#define SET_B_BUS_REQ		_IOW(OTG_IOCTL_MAGIC, 5, int)
+#define GET_A_SUSPEND_REQ	_IOR(OTG_IOCTL_MAGIC, 6, int)
+#define GET_A_BUS_DROP		_IOR(OTG_IOCTL_MAGIC, 7, int)
+#define GET_A_BUS_REQ		_IOR(OTG_IOCTL_MAGIC, 8, int)
+#define GET_B_BUS_REQ		_IOR(OTG_IOCTL_MAGIC, 9, int)
+
+extern const char *state_string(enum usb_otg_state state);
+extern int otg_set_resources(struct resource *resources);
+/* prototype declaration */
+extern void fsl_otg_add_timer(void *timer);
+extern void fsl_otg_del_timer(void *timer);
--- /dev/null
+++ b/drivers/usb/otg/otg_fsm.c
@@ -0,0 +1,371 @@
+/* OTG Finite State Machine from OTG spec
+ *
+ * Copyright 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author:	Li Yang <LeoLi@freescale.com>
+ *		Jerry Huang <Chang-Ming.Huang@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/usb/otg.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/usb.h>
+#include <linux/usb/gadget.h>
+
+#include <linux/types.h>
+#include "otg_fsm.h"
+
+
+/* Defined by device specific driver, for different timer implementation */
+extern void *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr,
+	*b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_fail_tmr, *a_wait_enum_tmr;
+
+const char *state_string(enum usb_otg_state state)
+{
+	switch (state) {
+	case OTG_STATE_A_IDLE:		return "a_idle";
+	case OTG_STATE_A_WAIT_VRISE:	return "a_wait_vrise";
+	case OTG_STATE_A_WAIT_BCON:	return "a_wait_bcon";
+	case OTG_STATE_A_HOST:		return "a_host";
+	case OTG_STATE_A_SUSPEND:	return "a_suspend";
+	case OTG_STATE_A_PERIPHERAL:	return "a_peripheral";
+	case OTG_STATE_A_WAIT_VFALL:	return "a_wait_vfall";
+	case OTG_STATE_A_VBUS_ERR:	return "a_vbus_err";
+	case OTG_STATE_B_IDLE:		return "b_idle";
+	case OTG_STATE_B_SRP_INIT:	return "b_srp_init";
+	case OTG_STATE_B_PERIPHERAL:	return "b_peripheral";
+	case OTG_STATE_B_WAIT_ACON:	return "b_wait_acon";
+	case OTG_STATE_B_HOST:		return "b_host";
+	default:			return "UNDEFINED";
+	}
+}
+
+/* Change USB protocol when there is a protocol change */
+static int otg_set_protocol(struct otg_fsm *fsm, int protocol)
+{
+	int ret = 0;
+
+	if (fsm->protocol != protocol) {
+		VDBG("Changing role fsm->protocol= %d; new protocol= %d\n",
+				fsm->protocol, protocol);
+		/* stop old protocol */
+		if (fsm->protocol == PROTO_HOST)
+			ret = fsm->ops->start_host(fsm, 0);
+		else if (fsm->protocol == PROTO_GADGET)
+			ret = fsm->ops->start_gadget(fsm, 0);
+		if (ret)
+			return ret;
+
+		/* start new protocol */
+		if (protocol == PROTO_HOST)
+			ret = fsm->ops->start_host(fsm, 1);
+		else if (protocol == PROTO_GADGET)
+			ret = fsm->ops->start_gadget(fsm, 1);
+		if (ret)
+			return ret;
+
+		fsm->protocol = protocol;
+		return 0;
+	}
+
+	return 0;
+}
+
+static int state_changed;
+
+/* Called when leaving a state.  Do state clean up jobs here */
+void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
+{
+	switch (old_state) {
+	case OTG_STATE_B_IDLE:
+		otg_del_timer(fsm, b_se0_srp_tmr);
+		fsm->b_se0_srp = 0;
+		break;
+	case OTG_STATE_B_SRP_INIT:
+		fsm->b_srp_done = 0;
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+		otg_del_timer(fsm, b_ase0_brst_tmr);
+		fsm->b_ase0_brst_tmout = 0;
+		break;
+	case OTG_STATE_B_HOST:
+		break;
+	case OTG_STATE_A_IDLE:
+		break;
+	case OTG_STATE_A_WAIT_VRISE:
+		otg_del_timer(fsm, a_wait_vrise_tmr);
+		fsm->a_wait_vrise_tmout = 0;
+		break;
+	case OTG_STATE_A_WAIT_BCON:
+		otg_del_timer(fsm, a_wait_bcon_tmr);
+		fsm->a_wait_bcon_tmout = 0;
+		break;
+	case OTG_STATE_A_HOST:
+		otg_del_timer(fsm, a_wait_enum_tmr);
+		break;
+	case OTG_STATE_A_SUSPEND:
+		otg_del_timer(fsm, a_aidl_bdis_tmr);
+		fsm->a_aidl_bdis_tmout = 0;
+		fsm->a_suspend_req = 0;
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		otg_del_timer(fsm, a_wait_vrise_tmr);
+		break;
+	case OTG_STATE_A_VBUS_ERR:
+		break;
+	default:
+		break;
+	}
+}
+
+/* Called when entering a state */
+int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
+{
+	state_changed = 1;
+	if (fsm->transceiver->state == new_state)
+		return 0;
+	VDBG("Set state: %s\n", state_string(new_state));
+	otg_leave_state(fsm, fsm->transceiver->state);
+	switch (new_state) {
+	case OTG_STATE_B_IDLE:
+		otg_drv_vbus(fsm, 0);
+		otg_chrg_vbus(fsm, 0);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_UNDEF);
+		otg_add_timer(fsm, b_se0_srp_tmr);
+		break;
+	case OTG_STATE_B_SRP_INIT:
+		otg_start_pulse(fsm);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_UNDEF);
+		otg_add_timer(fsm, b_srp_fail_tmr);
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		otg_chrg_vbus(fsm, 0);
+		otg_loc_conn(fsm, 1);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_GADGET);
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+		otg_chrg_vbus(fsm, 0);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_HOST);
+		otg_add_timer(fsm, b_ase0_brst_tmr);
+		fsm->a_bus_suspend = 0;
+		break;
+	case OTG_STATE_B_HOST:
+		otg_chrg_vbus(fsm, 0);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 1);
+		otg_set_protocol(fsm, PROTO_HOST);
+		usb_bus_start_enum(fsm->transceiver->host,
+				fsm->transceiver->host->otg_port);
+		break;
+	case OTG_STATE_A_IDLE:
+		otg_drv_vbus(fsm, 0);
+		otg_chrg_vbus(fsm, 0);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_HOST);
+		break;
+	case OTG_STATE_A_WAIT_VRISE:
+		otg_drv_vbus(fsm, 1);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_HOST);
+		otg_add_timer(fsm, a_wait_vrise_tmr);
+		break;
+	case OTG_STATE_A_WAIT_BCON:
+		otg_drv_vbus(fsm, 1);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_HOST);
+		otg_add_timer(fsm, a_wait_bcon_tmr);
+		break;
+	case OTG_STATE_A_HOST:
+		otg_drv_vbus(fsm, 1);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 1);
+		otg_set_protocol(fsm, PROTO_HOST);
+		/* When HNP is triggered while a_bus_req = 0, a_host will
+		 * suspend too fast to complete a_set_b_hnp_en */
+		if (!fsm->a_bus_req || fsm->a_suspend_req)
+			otg_add_timer(fsm, a_wait_enum_tmr);
+		break;
+	case OTG_STATE_A_SUSPEND:
+		otg_drv_vbus(fsm, 1);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_HOST);
+		otg_add_timer(fsm, a_aidl_bdis_tmr);
+
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		otg_loc_conn(fsm, 1);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_GADGET);
+		otg_drv_vbus(fsm, 1);
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		otg_drv_vbus(fsm, 0);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_HOST);
+		break;
+	case OTG_STATE_A_VBUS_ERR:
+		otg_drv_vbus(fsm, 0);
+		otg_loc_conn(fsm, 0);
+		otg_loc_sof(fsm, 0);
+		otg_set_protocol(fsm, PROTO_UNDEF);
+		break;
+	default:
+		break;
+	}
+
+	fsm->transceiver->state = new_state;
+	return 0;
+}
+
+/* State change judgement */
+int otg_statemachine(struct otg_fsm *fsm)
+{
+	enum usb_otg_state state;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fsm->lock, flags);
+
+	state = fsm->transceiver->state;
+	state_changed = 0;
+	/* State machine state change judgement */
+
+	switch (state) {
+	case OTG_STATE_UNDEFINED:
+		VDBG("fsm->id = %d\n", fsm->id);
+		if (fsm->id)
+			otg_set_state(fsm, OTG_STATE_B_IDLE);
+		else
+			otg_set_state(fsm, OTG_STATE_A_IDLE);
+		break;
+	case OTG_STATE_B_IDLE:
+		if (!fsm->id)
+			otg_set_state(fsm, OTG_STATE_A_IDLE);
+		else if (fsm->b_sess_vld && fsm->transceiver->gadget)
+			otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
+		else if (fsm->b_bus_req && fsm->b_sess_end && fsm->b_se0_srp)
+			otg_set_state(fsm, OTG_STATE_B_SRP_INIT);
+		break;
+	case OTG_STATE_B_SRP_INIT:
+		if (!fsm->id || fsm->b_srp_done)
+			otg_set_state(fsm, OTG_STATE_B_IDLE);
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		if (!fsm->id || !fsm->b_sess_vld)
+			otg_set_state(fsm, OTG_STATE_B_IDLE);
+		else if (fsm->b_bus_req && fsm->transceiver->
+				gadget->b_hnp_enable && fsm->a_bus_suspend)
+			otg_set_state(fsm, OTG_STATE_B_WAIT_ACON);
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+		if (fsm->a_conn)
+			otg_set_state(fsm, OTG_STATE_B_HOST);
+		else if (!fsm->id || !fsm->b_sess_vld)
+			otg_set_state(fsm, OTG_STATE_B_IDLE);
+		else if (fsm->a_bus_resume || fsm->b_ase0_brst_tmout) {
+			fsm->b_ase0_brst_tmout = 0;
+			otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
+		}
+		break;
+	case OTG_STATE_B_HOST:
+		if (!fsm->id || !fsm->b_sess_vld)
+			otg_set_state(fsm, OTG_STATE_B_IDLE);
+		else if (!fsm->b_bus_req || !fsm->a_conn)
+			otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
+		break;
+	case OTG_STATE_A_IDLE:
+		if (fsm->id)
+			otg_set_state(fsm, OTG_STATE_B_IDLE);
+		else if (!fsm->a_bus_drop && (fsm->a_bus_req || fsm->a_srp_det))
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VRISE);
+		break;
+	case OTG_STATE_A_WAIT_VRISE:
+		if (fsm->id || fsm->a_bus_drop || fsm->a_vbus_vld ||
+				fsm->a_wait_vrise_tmout) {
+			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
+		}
+		break;
+	case OTG_STATE_A_WAIT_BCON:
+		if (!fsm->a_vbus_vld)
+			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
+		else if (fsm->b_conn)
+			otg_set_state(fsm, OTG_STATE_A_HOST);
+		else if (fsm->id | fsm->a_bus_drop | fsm->a_wait_bcon_tmout)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
+		break;
+	case OTG_STATE_A_HOST:
+		if ((!fsm->a_bus_req || fsm->a_suspend_req) &&
+				fsm->transceiver->host->b_hnp_enable)
+			otg_set_state(fsm, OTG_STATE_A_SUSPEND);
+		else if (fsm->id || !fsm->b_conn || fsm->a_bus_drop)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
+		else if (!fsm->a_vbus_vld)
+			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
+		break;
+	case OTG_STATE_A_SUSPEND:
+		if (!fsm->b_conn && fsm->transceiver->host->b_hnp_enable)
+			otg_set_state(fsm, OTG_STATE_A_PERIPHERAL);
+		else if (!fsm->b_conn && !fsm->transceiver->host->b_hnp_enable)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
+		else if (fsm->a_bus_req || fsm->b_bus_resume)
+			otg_set_state(fsm, OTG_STATE_A_HOST);
+		else if (fsm->id || fsm->a_bus_drop || fsm->a_aidl_bdis_tmout)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
+		else if (!fsm->a_vbus_vld)
+			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		if (fsm->id || fsm->a_bus_drop)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
+		else if (fsm->b_bus_suspend)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
+		else if (!fsm->a_vbus_vld)
+			otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		if (fsm->id || fsm->a_bus_req || (!fsm->a_sess_vld &&
+					!fsm->b_conn))
+			otg_set_state(fsm, OTG_STATE_A_IDLE);
+		break;
+	case OTG_STATE_A_VBUS_ERR:
+		if (fsm->id || fsm->a_bus_drop || fsm->a_clr_err)
+			otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
+		break;
+	default:
+		break;
+	}
+	spin_unlock_irqrestore(&fsm->lock, flags);
+
+	/*VDBG("quit statemachine, changed = %d\n", state_changed); */
+	return state_changed;
+}
--- /dev/null
+++ b/drivers/usb/otg/otg_fsm.h
@@ -0,0 +1,151 @@
+/* Copyright 2006-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if 0
+#define DEBUG	1
+#define VERBOSE	1
+#endif
+
+#ifdef DEBUG
+#define DBG(fmt, args...) printk(KERN_DEBUG "[%s]  " fmt , \
+				 __func__, ## args)
+#else
+#define DBG(fmt, args...)	do {} while (0)
+#endif
+
+#ifdef VERBOSE
+#define VDBG		DBG
+#else
+#define VDBG(stuff...)	do {} while (0)
+#endif
+
+#ifdef VERBOSE
+#define MPC_LOC printk("Current Location [%s]:[%d]\n", __FILE__, __LINE__)
+#else
+#define MPC_LOC do {} while (0)
+#endif
+
+#define PROTO_UNDEF	(0)
+#define PROTO_HOST	(1)
+#define PROTO_GADGET	(2)
+
+/* OTG state machine according to the OTG spec */
+struct otg_fsm {
+	/* Input */
+	int a_bus_resume;
+	int a_bus_suspend;
+	int a_conn;
+	int a_sess_vld;
+	int a_srp_det;
+	int a_vbus_vld;
+	int b_bus_resume;
+	int b_bus_suspend;
+	int b_conn;
+	int b_se0_srp;
+	int b_sess_end;
+	int b_sess_vld;
+	int id;
+
+	/* Internal variables */
+	int a_set_b_hnp_en;
+	int b_srp_done;
+	int b_hnp_enable;
+
+	/* Timeout indicator for timers */
+	int a_wait_vrise_tmout;
+	int a_wait_bcon_tmout;
+	int a_aidl_bdis_tmout;
+	int b_ase0_brst_tmout;
+
+	/* Informative variables */
+	int a_bus_drop;
+	int a_bus_req;
+	int a_clr_err;
+	int a_suspend_req;
+	int b_bus_req;
+
+	/* Output */
+	int drv_vbus;
+	int loc_conn;
+	int loc_sof;
+
+	struct otg_fsm_ops *ops;
+	struct otg_transceiver *transceiver;
+
+	/* Current usb protocol used: 0:undefine; 1:host; 2:client */
+	int protocol;
+	spinlock_t lock;
+};
+
+struct otg_fsm_ops {
+	void	(*chrg_vbus)(int on);
+	void	(*drv_vbus)(int on);
+	void	(*loc_conn)(int on);
+	void	(*loc_sof)(int on);
+	void	(*start_pulse)(void);
+	void	(*add_timer)(void *timer);
+	void	(*del_timer)(void *timer);
+	int	(*start_host)(struct otg_fsm *fsm, int on);
+	int	(*start_gadget)(struct otg_fsm *fsm, int on);
+};
+
+
+static inline void otg_chrg_vbus(struct otg_fsm *fsm, int on)
+{
+	fsm->ops->chrg_vbus(on);
+}
+
+static inline void otg_drv_vbus(struct otg_fsm *fsm, int on)
+{
+	if (fsm->drv_vbus != on) {
+		fsm->drv_vbus = on;
+		fsm->ops->drv_vbus(on);
+	}
+}
+
+static inline void otg_loc_conn(struct otg_fsm *fsm, int on)
+{
+	if (fsm->loc_conn != on) {
+		fsm->loc_conn = on;
+		fsm->ops->loc_conn(on);
+	}
+}
+
+static inline void otg_loc_sof(struct otg_fsm *fsm, int on)
+{
+	if (fsm->loc_sof != on) {
+		fsm->loc_sof = on;
+		fsm->ops->loc_sof(on);
+	}
+}
+
+static inline void otg_start_pulse(struct otg_fsm *fsm)
+{
+	fsm->ops->start_pulse();
+}
+
+static inline void otg_add_timer(struct otg_fsm *fsm, void *timer)
+{
+	fsm->ops->add_timer(timer);
+}
+
+static inline void otg_del_timer(struct otg_fsm *fsm, void *timer)
+{
+	fsm->ops->del_timer(timer);
+}
+
+int otg_statemachine(struct otg_fsm *fsm);
--- /dev/null
+++ b/drivers/usb/otg/usb.c
@@ -0,0 +1,76 @@
+/* Copyright 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Li Yang <LeoLi@freescale.com>
+ *         Jerry Huang <Chang-Ming.Huang@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/usb/otg.h>
+
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+
+
+static struct otg_transceiver *transceiver;
+static struct resource *otg_resources;
+
+/*
+ * otg_get_transceiver - find the (single) OTG transceiver driver
+ *
+ * Returns the transceiver driver, after getting a refcount to it; or
+ * null if there is no such transceiver.  The caller is responsible for
+ * releasing that count.
+ */
+struct otg_transceiver *otg_get_transceiver(void)
+{
+	pr_debug("%s transceiver=0x%p\n", __func__, transceiver);
+	if (transceiver)
+		get_device(transceiver->dev);
+
+	return transceiver;
+}
+EXPORT_SYMBOL(otg_get_transceiver);
+
+int otg_set_transceiver(struct otg_transceiver *otg)
+{
+	if (transceiver && otg)
+		return -EBUSY;
+
+	transceiver = otg;
+
+	return 0;
+}
+EXPORT_SYMBOL(otg_set_transceiver);
+
+struct resource *otg_get_resources(void)
+{
+	return otg_resources;
+}
+EXPORT_SYMBOL(otg_get_resources);
+
+int otg_set_resources(struct resource *resources)
+{
+	otg_resources = resources;
+	return 0;
+}
+EXPORT_SYMBOL(otg_set_resources);
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -72,6 +72,18 @@ struct fsl_usb2_platform_data {
 	void		(*exit)(struct platform_device *);
 	void __iomem	*regs;		/* ioremap'd register base */
 	struct clk	*clk;
+#ifdef CONFIG_COLDFIRE
+	u32 xcvr_type;          /* PORTSC_PTS_* */
+	char *name;             /* pretty print */
+	char *transceiver;      /* transceiver name */
+	unsigned power_budget;  /* for hcd->power_budget */
+	struct platform_device *pdev;
+	struct fsl_xcvr_ops *xcvr_ops;
+
+	int (*gpio_usb_active) (void);
+	void (*gpio_usb_inactive) (void);
+
+#endif
 	unsigned	big_endian_mmio:1;
 	unsigned	big_endian_desc:1;
 	unsigned	es:1;		/* need USBMODE:ES */
@@ -79,6 +91,20 @@ struct fsl_usb2_platform_data {
 	unsigned	have_sysif_regs:1;
 	unsigned	invert_drvvbus:1;
 	unsigned	invert_pwr_fault:1;
+#ifdef CONFIG_COLDFIRE
+	unsigned		suspended:1;
+	unsigned		already_suspended:1;
+#endif
+	/* register save area for suspend/resume */
+	u32	pm_command;
+	u32	pm_status;
+	u32	pm_intr_enable;
+	u32	pm_frame_index;
+	u32	pm_segment;
+	u32	pm_frame_list;
+	u32	pm_async_next;
+	u32	pm_configured_flag;
+	u32	pm_portsc;
 };
 
 /* Flags in fsl_usb2_mph_platform_data */
--- /dev/null
+++ b/include/linux/usb/fsl_usb2.h
@@ -0,0 +1,410 @@
+/*
+ * Copyright 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Freescale USB device/endpoint management registers
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __FSL_USB2_H
+#define __FSL_USB2_H
+
+
+ /* USB DR device mode registers (Little Endian) */
+struct fsl_usb_device_regs {
+	/* Capability register */
+	u32 id;
+	u32 res1[63];
+	u16 caplength;		/* Capability Register Length */
+	u16 hciversion;		/* Host Controller Interface Version */
+	u32 hcsparams;		/* Host Controller Structual Parameters */
+	u32 hccparams;		/* Host Controller Capability Parameters */
+	u32 res2[5];
+	u32 dciversion;		/* Device Controller Interface Version */
+	u32 dccparams;		/* Device Controller Capability Parameters */
+	u32 res3[6];
+	/* Operation register */
+	u32 usbcmd;		/* USB Command Register */
+	u32 usbsts;		/* USB Status Register */
+	u32 usbintr;		/* USB Interrupt Enable Register */
+	u32 frindex;		/* Frame Index Register */
+	u32 res4;
+	u32 deviceaddr;		/* Device Address */
+	u32 endpointlistaddr;	/* Endpoint List Address Register */
+	u32 res5;
+	u32 burstsize;		/* Master Interface Data Burst Size Register */
+	u32 txttfilltuning;	/* Transmit FIFO Tuning Controls Register */
+	u32 res6[2];
+	u32 ulpiview;
+	u32 res7[3];
+	u32 configflag;		/* Configure Flag Register */
+	u32 portsc1;		/* Port 1 Status and Control Register */
+	u32 res8[7];
+	u32 otgsc;		/* On-The-Go Status and Control */
+	u32 usbmode;		/* USB Mode Register */
+	u32 endptsetupstat;	/* Endpoint Setup Status Register */
+	u32 endpointprime;	/* Endpoint Initialization Register */
+	u32 endptflush;		/* Endpoint Flush Register */
+	u32 endptstatus;	/* Endpoint Status Register */
+	u32 endptcomplete;	/* Endpoint Complete Register */
+	/* DCCPARAMS:DEN has the real number of device endpoints. */
+	u32 endptctrl[16];	/* Endpoint Control Registers */
+};
+
+ /* USB DR host mode registers (Little Endian) */
+struct fsl_usb_host_regs {
+	/* Capability register */
+	u32 id;
+	u32 res1[63];
+	u16 caplength;		/* Capability Register Length */
+	u16 hciversion;		/* Host Controller Interface Version */
+	u32 hcsparams;		/* Host Controller Structual Parameters */
+	u32 hccparams;		/* Host Controller Capability Parameters */
+	u32 res2[5];
+	u32 dciversion;		/* Device Controller Interface Version */
+	u32 dccparams;		/* Device Controller Capability Parameters */
+	u32 res3[6];
+	/* Operation register */
+	u32 usbcmd;		/* USB Command Register */
+	u32 usbsts;		/* USB Status Register */
+	u32 usbintr;		/* USB Interrupt Enable Register */
+	u32 frindex;		/* Frame Index Register */
+	u32 res4;
+	u32 periodiclistbase;	/* Periodic Frame List Base Address Register */
+	u32 asynclistaddr;	/* Current Asynchronous List Address Register */
+	u32 res5;
+	u32 burstsize;		/* Master Interface Data Burst Size Register */
+	u32 txttfilltuning;	/* Transmit FIFO Tuning Controls Register */
+	u32 res6[2];
+	u32 ulpiview;
+	u32 res7[3];
+	u32 configflag;		/* Configure Flag Register */
+	u32 portsc1;		/* Port 1 Status and Control Register */
+	u32 res8[7];
+	u32 otgsc;		/* On-The-Go Status and Control */
+	u32 usbmode;		/* USB Mode Register */
+	u32 endptsetupstat;	/* Endpoint Setup Status Register */
+	u32 endpointprime;	/* Endpoint Initialization Register */
+	u32 endptflush;		/* Endpoint Flush Register */
+	u32 endptstatus;	/* Endpoint Status Register */
+	u32 endptcomplete;	/* Endpoint Complete Register */
+	/* DCCPARAMS:DEN has the real number of device endpoints. */
+	u32 endptctrl[16];	/* Endpoint Control Registers */
+};
+
+ /* non-EHCI USB system interface registers (Big Endian) */
+struct usb_sys_interface {
+	u32 snoop1;
+	u32 snoop2;
+	u32 age_cnt_thresh;	/* Age Count Threshold Register */
+	u32 pri_ctrl;		/* Priority Control Register */
+	u32 si_ctrl;		/* System Interface Control Register */
+	u32 res[59];
+	u32 control;		/* General Purpose Control Register */
+};
+
+/* ep0 transfer state */
+#define WAIT_FOR_SETUP		0
+#define DATA_STATE_XMIT		1
+#define DATA_STATE_NEED_ZLP	2
+#define WAIT_FOR_OUT_STATUS	3
+#define DATA_STATE_RECV		4
+
+/* Frame Index Register Bit Masks */
+#define	USB_FRINDEX_MASKS			0x3fff
+
+
+
+/* USBCMD Register Bit Masks */
+#define USB_CMD_RUN_STOP			0x00000001
+#define USB_CMD_CTRL_RESET			0x00000002
+#define USB_CMD_PERIODIC_SCHEDULE_EN		0x00000010
+#define USB_CMD_ASYNC_SCHEDULE_EN		0x00000020
+#define USB_CMD_INT_AA_DOORBELL			0x00000040
+#define USB_CMD_ASP				0x00000300
+#define USB_CMD_ASYNC_SCH_PARK_EN		0x00000800
+#define USB_CMD_SUTW				0x00002000
+#define USB_CMD_ATDTW				0x00004000
+#define USB_CMD_ITC				0x00FF0000
+
+/* bit 15,3,2 are frame list size */
+#define USB_CMD_FRAME_SIZE_1024			0x00000000
+#define USB_CMD_FRAME_SIZE_512			0x00000004
+#define USB_CMD_FRAME_SIZE_256			0x00000008
+#define USB_CMD_FRAME_SIZE_128			0x0000000C
+#define USB_CMD_FRAME_SIZE_64			0x00008000
+#define USB_CMD_FRAME_SIZE_32			0x00008004
+#define USB_CMD_FRAME_SIZE_16			0x00008008
+#define USB_CMD_FRAME_SIZE_8			0x0000800C
+
+/* bit 9-8 are async schedule park mode count */
+#define USB_CMD_ASP_00				0x00000000
+#define USB_CMD_ASP_01				0x00000100
+#define USB_CMD_ASP_10				0x00000200
+#define USB_CMD_ASP_11				0x00000300
+#define USB_CMD_ASP_BIT_POS			8
+
+/* bit 23-16 are interrupt threshold control */
+#define USB_CMD_ITC_NO_THRESHOLD		0x00000000
+#define USB_CMD_ITC_1_MICRO_FRM			0x00010000
+#define USB_CMD_ITC_2_MICRO_FRM			0x00020000
+#define USB_CMD_ITC_4_MICRO_FRM			0x00040000
+#define USB_CMD_ITC_8_MICRO_FRM			0x00080000
+#define USB_CMD_ITC_16_MICRO_FRM		0x00100000
+#define USB_CMD_ITC_32_MICRO_FRM		0x00200000
+#define USB_CMD_ITC_64_MICRO_FRM		0x00400000
+#define USB_CMD_ITC_BIT_POS			16
+
+
+
+
+/* USB STS Register Bit Masks */
+#define USB_STS_INT				0x00000001
+#define USB_STS_ERR				0x00000002
+#define USB_STS_PORT_CHANGE			0x00000004
+#define USB_STS_FRM_LST_ROLL			0x00000008
+#define USB_STS_SYS_ERR				0x00000010
+#define USB_STS_IAA				0x00000020
+#define USB_STS_RESET				0x00000040
+#define USB_STS_SOF				0x00000080
+#define USB_STS_SUSPEND				0x00000100
+#define USB_STS_HC_HALTED			0x00001000
+#define USB_STS_RCL				0x00002000
+#define USB_STS_PERIODIC_SCHEDULE		0x00004000
+#define USB_STS_ASYNC_SCHEDULE			0x00008000
+
+/* USB INTR Register Bit Masks */
+#define USB_INTR_INT_EN				0x00000001
+#define USB_INTR_ERR_INT_EN			0x00000002
+#define USB_INTR_PTC_DETECT_EN			0x00000004
+#define USB_INTR_FRM_LST_ROLL_EN		0x00000008
+#define USB_INTR_SYS_ERR_EN			0x00000010
+#define USB_INTR_ASYN_ADV_EN			0x00000020
+#define USB_INTR_RESET_EN			0x00000040
+#define USB_INTR_SOF_EN				0x00000080
+#define USB_INTR_DEVICE_SUSPEND			0x00000100
+
+/* Device Address bit masks */
+#define USB_DEVICE_ADDRESS_MASK			0xFE000000
+#define USB_DEVICE_ADDRESS_BIT_POS		25
+
+/* endpoint list address bit masks */
+#define USB_EP_LIST_ADDRESS_MASK		0xfffff800
+
+
+/* x_PORTSCx */
+/* bit 31-30 are port transceiver select */
+#define PORTSCX_PTS_MASK	(3 << 30)	/* parallel xcvr select mask */
+#define PORTSCX_PHY_TYPE_SEL	PORTSCX_PTS_MASK
+#define PORTSCX_PTS_UTMI	(0 << 30)	/* UTMI/UTMI+ */
+#define PORTSCX_PTS_PHILIPS	(1 << 30)	/* Philips classic */
+#define PORTSCX_PTS_ULPI	(2 << 30)	/* ULPI */
+#define PORTSCX_PTS_SERIAL	(3 << 30)	/* serial */
+#define PORTSCX_PTS_FSLS	PORTSCX_PTS_SERIAL
+#define PORTSCX_PTS_ONCHIP	PORTSCX_PTS_FSLS
+
+#define PORTSCX_STS			(1 << 29)	/* serial xcvr select */
+
+/* bit 28 is parallel transceiver width for UTMI interface */
+#define PORTSCX_PTW_8BIT		(0 << 28) /* 8 bit parallel xcvr */
+#define PORTSCX_PTW_16BIT		(1 << 28) /* 16 bi parallel xcvr */
+
+/* bit 27-26 are port speed */
+#define PORTSCX_PORT_SPEED_FULL		(0 << 26)
+#define PORTSCX_PORT_SPEED_LOW		(1 << 26)
+#define PORTSCX_PORT_SPEED_HIGH		(2 << 26)
+#define PORTSCX_PORT_SPEED_UNDEF	(3 << 26)
+#define PORTSCX_PORT_SPEED_MASK		(3 << 26)
+
+/* phy low pwr suspend/clk disable */
+#define PORTSCX_PHY_LOW_POWER_SPD	(1 << 23)
+
+/* bit 19-16 are port test control */
+#define PORTSCX_PTC_DISABLE		(0 << 16)
+#define PORTSCX_PTC_JSTATE		(1 << 16)
+#define PORTSCX_PTC_KSTATE		(2 << 16)
+#define PORTSCX_PTC_SEQNAK		(3 << 16) /* SE0 (host)/NAK (device)*/
+#define PORTSCX_PTC_PACKET		(4 << 16)
+#define PORTSCX_PTC_FORCE_EN_HS		(5 << 16)
+#define PORTSCX_PTC_FORCE_EN_FS		(6 << 16)
+#define PORTSCX_PTC_FORCE_EN_LS		(7 << 16)
+
+
+/* bit 15-14 are port indicator control */
+#define PORTSCX_PIC_OFF			(0 << 14)
+#define PORTSCX_PIC_AMBER		(1 << 14)
+#define PORTSCX_PIC_GREEN		(2 << 14)
+#define PORTSCX_PIC_UNDEF		(3 << 14)
+
+#define PORTSCX_PORT_POWER		(1 << 12)	/* port power */
+
+/* bit 11-10 are line status */
+#define PORTSCX_LS_MASK			(3 << 10)	/* Line State mask */
+#define PORTSCX_LS_SE0			(0 << 10)	/* SE0     */
+#define PORTSCX_LS_K_STATE		(1 << 10)	/* K-state */
+#define PORTSCX_LS_J_STATE		(2 << 10)	/* J-state */
+
+#define PORTSCX_PORT_RESET		(1 <<  8)	/* Port reset */
+#define PORTSCX_PORT_SUSPEND		(1 <<  7)	/* Suspend */
+#define PORTSCX_PORT_FORCE_RESUME	(1 <<  6)	/* Force port resume */
+#define PORTSCX_OVER_CURRENT_CHG	(1 <<  5) /* over current change */
+#define PORTSCX_OVER_CURRENT_ACT	(1 <<  4) /* over currrent active */
+#define PORTSCX_PORT_EN_DIS_CHANGE	(1 <<  3) /* port {en,dis}able change*/
+#define PORTSCX_PORT_ENABLE		(1 <<  2) /* port enabled */
+#define PORTSCX_CONNECT_STATUS_CHANGE	(1 <<  1) /* connect status change */
+#define PORTSCX_CURRENT_CONNECT_STATUS	(1 <<  0) /* current connect status */
+
+#define PORTSCX_W1C_BITS		\
+	(PORTSCX_CONNECT_STATUS_CHANGE | \
+	PORTSCX_PORT_EN_DIS_CHANGE    | \
+	PORTSCX_OVER_CURRENT_CHG)
+
+
+
+/* UOG_OTGSC Register Bits */
+/* control bits: */
+#define  OTGSC_CTRL_VBUS_DISCHARGE	(1 <<  0)
+#define  OTGSC_CTRL_VBUS_CHARGE		(1 <<  1)
+#define  OTGSC_CTRL_OTG_TERM		(1 <<  3)/* controls DM pulldown */
+#define  OTGSC_CTRL_DATA_PULSING	(1 <<  4)
+#define  OTGSC_CTRL_USB_ID_PU		(1 <<  5)	/* enable ID pullup */
+/* current status: (R/O) */
+#define  OTGSC_STS_USB_ID		(1 <<  8)/* 0=A-device  1=B-device */
+#define  OTGSC_STS_A_VBUS_VALID		(1 <<  9)
+#define  OTGSC_STS_A_SESSION_VALID	(1 << 10)
+#define  OTGSC_STS_B_SESSION_VALID	(1 << 11)
+#define  OTGSC_STS_B_SESSION_END	(1 << 12)
+#define  OTGSC_STS_1ms_TIMER		(1 << 13)
+#define  OTGSC_STS_DATA_PULSE		(1 << 14)
+/* interrupt status: (write to clear) */
+#define  OTGSC_INTSTS_MASK		(0x7f << 16)
+#define  OTGSC_INTSTS_USB_ID		(1 << 16)
+#define  OTGSC_INTSTS_A_VBUS_VALID	(1 << 17)
+#define  OTGSC_INTSTS_A_SESSION_VALID	(1 << 18)
+#define  OTGSC_INTSTS_B_SESSION_VALID	(1 << 19)
+#define  OTGSC_INTSTS_B_SESSION_END	(1 << 20)
+#define  OTGSC_INTSTS_1MS_TIMER		(1 << 21)
+#define  OTGSC_INTSTS_DATA_PULSE	(1 << 22)
+/* interrupt enables: */
+#define  OTGSC_IE_MASK			(0x7f << 24)
+#define  OTGSC_IE_USB_ID		(1 << 24)
+#define  OTGSC_IE_A_VBUS_VALID		(1 << 25)
+#define  OTGSC_IE_A_SESSION_VALID	(1 << 26)
+#define  OTGSC_IE_B_SESSION_VALID	(1 << 27)
+#define  OTGSC_IE_B_SESSION_END		(1 << 28)
+#define  OTGSC_IE_1ms_TIMER		(1 << 29)
+#define  OTGSC_IE_DATA_PULSE		(1 << 30)
+
+#if 1	/* DDD FIXME these here for compatibility between my names and Leo's */
+/* OTG interrupt enable bit masks */
+#define  OTGSC_INTERRUPT_ENABLE_BITS_MASK	OTGSC_IE_MASK
+
+/* OTG interrupt status bit masks */
+#define  OTGSC_INTERRUPT_STATUS_BITS_MASK	OTGSC_INTSTS_MASK
+#endif
+
+
+
+/* x_USBMODE */
+#undef USBMODE_SDIS	/* defined as bit 3 in drivers/usb/host/ehci.h */
+#define USBMODE_SDIS		(1 << 4)	/* stream disable mode */
+#define USBMODE_SLOM		(1 << 3)	/* setup lockout mode */
+#define USBMODE_ES		(1 << 2)	/* (big) endian select */
+#define USBMODE_CM_MASK		(3 << 0)	/* controller mode mask */
+#define USBMODE_CM_HOST		(3 << 0)	/* host */
+#define USBMODE_CM_DEVICE	(2 << 0)	/* device */
+
+/* DDD for compatibility for now */
+#define USB_MODE_CTRL_MODE_IDLE		USBMODE_CM_IDLE
+#define USB_MODE_CTRL_MODE_DEVICE	USBMODE_CM_DEVICE
+#define USB_MODE_CTRL_MODE_HOST		USBMODE_CM_HOST
+#define USB_MODE_SETUP_LOCK_OFF		USBMODE_SLOM
+#define USB_MODE_STREAM_DISABLE		USBMODE_SDIS
+
+
+/* ULPIVIEW register bits */
+#define ULPIVW_WU		(1 << 31)	/* Wakeup */
+#define ULPIVW_RUN		(1 << 30)	/* read/write run */
+#define ULPIVW_WRITE		(1 << 29)	/* 0=read  1=write */
+#define ULPIVW_SS		(1 << 27)	/* SyncState */
+#define ULPIVW_PORT_MASK	0x07		/* Port field */
+#define ULPIVW_PORT_SHIFT	24
+#define ULPIVW_ADDR_MASK	0xFF		/* data address field */
+#define ULPIVW_ADDR_SHIFT	16
+#define ULPIVW_RDATA_MASK	0xFF		/* read data field */
+#define ULPIVW_RDATA_SHIFT	8
+#define ULPIVW_WDATA_MASK	0xFF		/* write data field */
+#define ULPIVW_WDATA_SHIFT	0
+
+
+/* Endpoint Flush Register */
+#define EPFLUSH_TX_OFFSET			0x00010000
+#define EPFLUSH_RX_OFFSET			0x00000000
+
+/* Endpoint Setup Status bit masks */
+#define EP_SETUP_STATUS_MASK			0x0000003F
+#define EP_SETUP_STATUS_EP0			0x00000001
+
+/* ENDPOINTCTRLx  Register Bit Masks */
+#define EPCTRL_TX_ENABLE			0x00800000
+#define EPCTRL_TX_DATA_TOGGLE_RST		0x00400000	/* Not EP0 */
+#define EPCTRL_TX_DATA_TOGGLE_INH		0x00200000	/* Not EP0 */
+#define EPCTRL_TX_TYPE				0x000C0000
+#define EPCTRL_TX_DATA_SOURCE			0x00020000	/* Not EP0 */
+#define EPCTRL_TX_EP_STALL			0x00010000
+#define EPCTRL_RX_ENABLE			0x00000080
+#define EPCTRL_RX_DATA_TOGGLE_RST		0x00000040	/* Not EP0 */
+#define EPCTRL_RX_DATA_TOGGLE_INH		0x00000020	/* Not EP0 */
+#define EPCTRL_RX_TYPE				0x0000000C
+#define EPCTRL_RX_DATA_SINK			0x00000002	/* Not EP0 */
+#define EPCTRL_RX_EP_STALL			0x00000001
+
+/* bit 19-18 and 3-2 are endpoint type */
+#define EPCTRL_EP_TYPE_CONTROL			0
+#define EPCTRL_EP_TYPE_ISO			1
+#define EPCTRL_EP_TYPE_BULK			2
+#define EPCTRL_EP_TYPE_INTERRUPT		3
+#define EPCTRL_TX_EP_TYPE_SHIFT			18
+#define EPCTRL_RX_EP_TYPE_SHIFT			2
+
+/* pri_ctrl Register Bit Masks */
+#define PRI_CTRL_PRI_LVL1			0x0000000C
+#define PRI_CTRL_PRI_LVL0			0x00000003
+
+/* si_ctrl Register Bit Masks */
+#define SI_CTRL_ERR_DISABLE			0x00000010
+#define SI_CTRL_IDRC_DISABLE			0x00000008
+#define SI_CTRL_RD_SAFE_EN			0x00000004
+#define SI_CTRL_RD_PREFETCH_DISABLE		0x00000002
+#define SI_CTRL_RD_PREFEFETCH_VAL		0x00000001
+
+
+/* control Register Bit Masks */
+#define USB_CTRL_IOENB				0x00000004
+#define USB_CTRL_ULPI_INT0EN			0x00000001
+
+
+/* Endpoint Transfer Descriptor bit Masks */
+#define DTD_NEXT_TERMINATE			0x00000001
+#define DTD_IOC					0x00008000
+#define DTD_STATUS_ACTIVE			0x00000080
+#define DTD_STATUS_HALTED			0x00000040
+#define DTD_STATUS_DATA_BUFF_ERR		0x00000020
+#define DTD_STATUS_TRANSACTION_ERR		0x00000008
+#define DTD_RESERVED_FIELDS			0x80007300
+#define DTD_ADDR_MASK				0xFFFFFFE0
+#define DTD_PACKET_SIZE				0x7FFF0000
+#define DTD_LENGTH_BIT_POS			16
+#define DTD_ERROR_MASK (DTD_STATUS_HALTED | \
+			DTD_STATUS_DATA_BUFF_ERR | \
+			DTD_STATUS_TRANSACTION_ERR)
+/* Alignment requirements; must be a power of two */
+#define DTD_ALIGNMENT				0x20
+#define QH_ALIGNMENT				2048
+
+/* Controller dma boundary */
+#define UDC_DMA_BOUNDARY			0x1000
+
+#endif	/* __FSL_USB2_H */
--- /dev/null
+++ b/include/linux/usb/fsl_xcvr.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2007-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/**
+ * struct fsl_xcvr_ops - USB transceiver operations
+ *
+ * @xcvr_type: one of PORTSCX_PTS_{UTMI,SERIAL,ULPI}
+ * @init: transceiver- and board-specific initialization function
+ * @uninit: transceiver- and board-specific uninitialization function
+ * @set_host:
+ * @set_device:
+ *
+ */
+struct fsl_xcvr_ops {
+	char *name;
+	u32 xcvr_type;
+	struct fsl_usb2_platform_data *pdata;
+
+	void (*init)(struct fsl_xcvr_ops *ops);
+	void (*uninit)(struct fsl_xcvr_ops *ops);
+	void (*suspend)(struct fsl_xcvr_ops *ops);
+	void (*set_host)(void);
+	void (*set_device)(void);
+	void (*set_vbus_power)(struct fsl_xcvr_ops *ops, int on);
+	void (*set_remote_wakeup)(u32 *view);
+	void (*pullup)(int on);
+};
+
+extern void fsl_usb_xcvr_register(struct fsl_xcvr_ops *xcvr_ops);
+extern void fsl_usb_xcvr_unregister(struct fsl_xcvr_ops *xcvr_ops);
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -164,7 +164,7 @@ otg_shutdown(struct otg_transceiver *otg
 }
 
 /* for usb host and peripheral controller drivers */
-#ifdef CONFIG_USB_OTG_UTILS
+#if defined(CONFIG_USB_OTG_UTILS) || defined(CONFIG_COLDFIRE)
 extern struct otg_transceiver *otg_get_transceiver(void);
 extern void otg_put_transceiver(struct otg_transceiver *);
 #else