1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
|
#!/bin/sh /etc/rc.common
# Copyright (C) 2006 OpenWrt.org
START=05
start() {
[ -e /etc/config/network ] && exit 0
mkdir -p /etc/config
(
if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
# WGT634u
echo boardtype=wgt634u
else
strings "$(find_mtd_part nvram)"
fi
) | awk '
function p(cfgname, name) {
if (c[name] != "") print " option " cfgname " \"" c[name] "\""
}
function macinc(mac, maca, i, result) {
split(mac, maca, ":")
for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
if (++maca[6] > 0xff) {
maca[5]++
maca[6] = 0
}
for (i = 1; i <= 6; i++) {
if (i != 1) result = result ":"
result = result sprintf("%02x", maca[i])
}
return result
}
BEGIN {
FS="="
c["lan_ifname"]="eth0.0"
c["wan_ifname"]="eth0.1"
c["vlan0ports"]="1 2 3 4 5*"
c["vlan1ports"]="0 5"
getline < "/proc/diag/model"
model=$0
for (i = 0; i < 6; i++) {
if (mac_check != "") mac_check = mac_check ":"
mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
}
}
($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
nvram[$1] = $2
}
END {
if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
c["wan_ifname"] = ""
c["lan_ifname"] = "eth1"
}
if (model == "ASUS WL-500g") {
c["wan_ifname"] = "eth1"
c["lan_ifname"] = "eth0"
}
if (model == "Dell TrueMobile 2300") {
c["vlan0ports"] = "0 1 2 3 5*"
c["vlan1ports"] = "4 5"
}
if (nvram["boardtype"] == "bcm94710r4") {
# Toshiba WRC-1000
c["lan_ifname"] = "eth0"
c["wan_ifname"] = "eth1"
}
if (nvram["boardtype"] == "wgt634u") {
c["vlan0ports"] = "0 1 2 3 5*"
c["vlan1ports"] = "4 5"
}
if (nvram["boardtype"] == "0x0467") {
c["vlan0ports"] = "0 1 2 3 5*"
c["vlan1ports"] = "4 5"
}
if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
if (nvram["boardnum"] == "45") {
# WL-500gP
c["vlan0ports"] = "1 2 3 4 5*"
c["vlan1ports"] = "0 5"
} else {
# Generic BCM94704
c["vlan0ports"] = "0 1 2 3 4 5u"
c["vlan1ports"] = ""
c["lan_ifname"] = "eth0"
c["wan_ifname"] = "eth1"
# MAC addresses on 4704 tend to be screwed up. Add a workaround here
if (nvram["et0macaddr"] ~ mac_check) {
c["lan_macaddr"] = nvram["et0macaddr"]
c["wan_macaddr"] = macinc(c["lan_macaddr"])
}
}
}
# WAP54G
if ((nvram["boardnum"] == "2") || \
(nvram["boardnum"] == "1024")) {
c["lan_ifname"]="eth0"
c["wan_ifname"]=""
}
# Sitecom WL-105b
if ((nvram["boardum"] == "2") && \
(nvram["GemtekPmonVer"] == "1")) {
c["lan_ifname"]="eth0"
c["wan_ifname"]=""
}
# ASUS WL-700gE
# These are actually same as defaults above. For some reason this script applies
# Generic BCM94704 settings instead so we revert to proper settings here.
# Hopefully someone will fix this properly soon.
if (model == "ASUS WL-700gE") {
c["lan_ifname"]="eth0.0"
c["wan_ifname"]="eth0.1"
c["vlan0ports"]="1 2 3 4 5*"
c["vlan1ports"]="0 5"
}
if (model == "Motorola WR850G V2/V3") {
c["vlan0ports"]="0 1 2 3 5*"
c["vlan1ports"]="4 5"
}
print "#### VLAN configuration "
print "config switch eth0"
p("vlan0", "vlan0ports")
p("vlan1", "vlan1ports")
print ""
print ""
print "#### Loopback configuration"
print "config interface loopback"
print " option ifname \"lo\""
print " option proto static"
print " option ipaddr 127.0.0.1"
print " option netmask 255.0.0.0"
print ""
print ""
print "#### LAN configuration"
print "config interface lan"
print " option type bridge"
p("ifname", "lan_ifname")
p("macaddr", "lan_macaddr")
print " option proto static"
print " option ipaddr 192.168.1.1"
print " option netmask 255.255.255.0"
print ""
print ""
print "#### WAN configuration"
print "config interface wan"
p("ifname", "wan_ifname")
p("macaddr", "wan_macaddr")
print " option proto dhcp"
}' > /etc/config/network
}
|
