path: root/target/linux/aruba-2.6/patches/000-aruba.patch

diff -Nur linux-2.6.21.1/arch/mips/Kconfig linux-2.6.21.1-owrt/arch/mips/Kconfig
--- linux-2.6.21.1/arch/mips/Kconfig	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/arch/mips/Kconfig	2007-05-23 23:34:01.000000000 +0200
@@ -220,6 +220,17 @@
 	  <http://www.marvell.com/>.  Say Y here if you wish to build a
 	  kernel for this platform.
 
+config MACH_ARUBA
+	bool "Support for the ARUBA product line"
+	select DMA_NONCOHERENT
+	select CPU_HAS_PREFETCH
+	select HW_HAS_PCI
+	select SWAP_IO_SPACE
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_BIG_ENDIAN
+
+
 config MACH_JAZZ
 	bool "Jazz family of machines"
 	select ARC
diff -Nur linux-2.6.21.1/arch/mips/Makefile linux-2.6.21.1-owrt/arch/mips/Makefile
--- linux-2.6.21.1/arch/mips/Makefile	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/arch/mips/Makefile	2007-05-23 23:34:01.000000000 +0200
@@ -158,6 +158,14 @@
 #
 
 #
+# Aruba
+#
+
+core-$(CONFIG_MACH_ARUBA)	+= arch/mips/aruba/
+cflags-$(CONFIG_MACH_ARUBA)	+= -Iinclude/asm-mips/aruba
+load-$(CONFIG_MACH_ARUBA)	+= 0x80100000
+
+#
 # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
 #
 core-$(CONFIG_MACH_JAZZ)	+= arch/mips/jazz/
diff -Nur linux-2.6.21.1/arch/mips/pci/Makefile linux-2.6.21.1-owrt/arch/mips/pci/Makefile
--- linux-2.6.21.1/arch/mips/pci/Makefile	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/arch/mips/pci/Makefile	2007-05-23 23:36:48.000000000 +0200
@@ -53,3 +53,4 @@
 obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
 obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
 obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
+obj-$(CONFIG_MACH_ARUBA)        += fixup-aruba.o ops-aruba.o pci-aruba.o
diff -Nur linux-2.6.21.1/drivers/char/watchdog/Makefile linux-2.6.21.1-owrt/drivers/char/watchdog/Makefile
--- linux-2.6.21.1/drivers/char/watchdog/Makefile	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/drivers/char/watchdog/Makefile	2007-05-23 23:36:53.000000000 +0200
@@ -82,5 +82,8 @@
 
 # SPARC64 Architecture
 
+# Aruba Architecture
+obj-$(CONFIG_MACH_ARUBA) += wdt_merlot.o
+
 # Architecture Independant
 obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
diff -Nur linux-2.6.21.1/drivers/char/watchdog/Makefile.orig linux-2.6.21.1-owrt/drivers/char/watchdog/Makefile.orig
--- linux-2.6.21.1/drivers/char/watchdog/Makefile.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.21.1-owrt/drivers/char/watchdog/Makefile.orig	2007-04-27 23:49:26.000000000 +0200
@@ -0,0 +1,86 @@
+#
+# Makefile for the WatchDog device drivers.
+#
+
+# Only one watchdog can succeed. We probe the ISA/PCI/USB based
+# watchdog-cards first, then the architecture specific watchdog
+# drivers and then the architecture independant "softdog" driver.
+# This means that if your ISA/PCI/USB card isn't detected that
+# you can fall back to an architecture specific driver and if
+# that also fails then you can fall back to the software watchdog
+# to give you some cover.
+
+# ISA-based Watchdog Cards
+obj-$(CONFIG_PCWATCHDOG) += pcwd.o
+obj-$(CONFIG_MIXCOMWD) += mixcomwd.o
+obj-$(CONFIG_WDT) += wdt.o
+
+# PCI-based Watchdog Cards
+obj-$(CONFIG_PCIPCWATCHDOG) += pcwd_pci.o
+obj-$(CONFIG_WDTPCI) += wdt_pci.o
+
+# USB-based Watchdog Cards
+obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
+
+# ARM Architecture
+obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
+obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
+obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
+obj-$(CONFIG_977_WATCHDOG) += wdt977.o
+obj-$(CONFIG_IXP2000_WATCHDOG) += ixp2000_wdt.o
+obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o
+obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o
+obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o
+obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
+obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
+obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
+
+# X86 (i386 + ia64 + x86_64) Architecture
+obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
+obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
+obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o
+obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
+obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
+obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
+obj-$(CONFIG_IB700_WDT) += ib700wdt.o
+obj-$(CONFIG_IBMASR) += ibmasr.o
+obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
+obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
+obj-$(CONFIG_I8XX_TCO) += i8xx_tco.o
+obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o
+obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
+obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
+obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o
+obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
+obj-$(CONFIG_SBC8360_WDT) += sbc8360.o
+obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
+obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o
+obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
+obj-$(CONFIG_W83697HF_WDT) += w83697hf_wdt.o
+obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
+obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o
+obj-$(CONFIG_MACHZ_WDT) += machzwd.o
+obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o
+
+# PowerPC Architecture
+obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
+obj-$(CONFIG_83xx_WDT) += mpc83xx_wdt.o
+obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o
+obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
+
+# PPC64 Architecture
+obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
+
+# MIPS Architecture
+obj-$(CONFIG_INDYDOG) += indydog.o
+obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
+
+# S390 Architecture
+
+# SUPERH Architecture
+obj-$(CONFIG_SH_WDT) += shwdt.o
+
+# SPARC64 Architecture
+
+# Architecture Independant
+obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
diff -Nur linux-2.6.21.1/drivers/mtd/chips/cfi_probe.c linux-2.6.21.1-owrt/drivers/mtd/chips/cfi_probe.c
--- linux-2.6.21.1/drivers/mtd/chips/cfi_probe.c	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/drivers/mtd/chips/cfi_probe.c	2007-05-23 23:36:42.000000000 +0200
@@ -25,6 +25,74 @@
 static void print_cfi_ident(struct cfi_ident *);
 #endif
 
+#if 1
+
+#define AMD_AUTOSEL_OFF1	0xAAA
+#define AMD_AUTOSEL_OFF2	0x555
+#define AMD_MANUF_ID		0x1
+#define AMD_DEVICE_ID1		0xF6 /* T */
+#define AMD_DEVICE_ID2		0xF9 /* B */
+/* Foll. are definitions for Macronix Flash Part */
+#define MCX_MANUF_ID		0xC2
+#define MCX_DEVICE_ID1		0xA7
+#define MCX_DEVICE_ID2		0xA8
+/* Foll. common to both AMD and Macronix */
+#define FACTORY_LOCKED		0x99
+#define USER_LOCKED		0x19
+
+/* NOTE: AP-70/6x use BYTE mode flash access. Therefore the
+ * lowest Addr. pin in the flash is not A0 but A-1 (A minus 1).
+ * CPU's A0 is tied to Flash's A-1, A1 to A0 and so on. This
+ * gives 4MB of byte-addressable mem. In byte mode, all addr
+ * need to be multiplied by 2 (i.e compared to word mode).
+ * NOTE: AMD_AUTOSEL_OFF1 and OFF2 are already mult. by 2
+ * Just blindly use the addr offsets suggested in the manual
+ * for byte mode and you'll be OK. Offs. in Table 6 need to
+ * be mult by 2 (for getting autosel params)
+ */
+void
+flash_detect(struct map_info *map, __u32 base, struct cfi_private *cfi)
+{
+	map_word val[3];
+	int osf = cfi->interleave * cfi->device_type; // =2 for AP70/6x
+	char *manuf, *part, *lock ;
+
+	if (osf != 1) return ;
+
+	cfi_send_gen_cmd(0xAA, AMD_AUTOSEL_OFF1, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, AMD_AUTOSEL_OFF2, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x90, AMD_AUTOSEL_OFF1, base, map, cfi, cfi->device_type, NULL);
+	val[0] = map_read(map, base) ; // manuf ID
+	val[1] = map_read(map, base+2) ; // device ID
+	val[2] = map_read(map, base+6) ; // lock indicator
+#if 0
+printk("v1=0x%x v2=0x%x v3=0x%x\n", val[0], val[1], val[2]) ;
+#endif
+	if (val[0].x[0] == AMD_MANUF_ID) {
+		manuf = "AMD Flash" ;
+		if (val[1].x[0] == AMD_DEVICE_ID1)
+			part = "AM29LV320D (Top)" ;
+		else if (val[1].x[0] == AMD_DEVICE_ID2)
+			part = "AM29LV320D (Bot)" ;
+		else part = "Unknown" ;
+	} else if (val[0].x[0] == MCX_MANUF_ID) {
+		manuf = "Macronix Flash" ;
+		if (val[1].x[0] == MCX_DEVICE_ID1)
+			part = "MX29LV320A (Top)" ;
+		else if (val[1].x[0] == MCX_DEVICE_ID2)
+			part = "MX29LV320A (Bot)" ;
+		else part = "Unknown" ;
+	} else
+		return ;
+	if (val[2].x[0] == FACTORY_LOCKED)
+		lock = "Factory Locked" ;
+	else if (val[2].x[0] == USER_LOCKED)
+		lock = "User Locked" ;
+	else lock = "Unknown locking" ;
+	printk("%s %s (%s)\n", manuf, part, lock) ;
+}
+#endif
+
 static int cfi_probe_chip(struct map_info *map, __u32 base,
 			  unsigned long *chip_map, struct cfi_private *cfi);
 static int cfi_chip_setup(struct map_info *map, struct cfi_private *cfi);
@@ -117,6 +185,10 @@
 	}
 
 	xip_disable();
+#if 1
+	//cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+	flash_detect(map, base, cfi) ;
+#endif
 	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
 	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
 	cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
diff -Nur linux-2.6.21.1/drivers/mtd/chips/cfi_probe.c.orig linux-2.6.21.1-owrt/drivers/mtd/chips/cfi_probe.c.orig
--- linux-2.6.21.1/drivers/mtd/chips/cfi_probe.c.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.21.1-owrt/drivers/mtd/chips/cfi_probe.c.orig	2007-04-27 23:49:26.000000000 +0200
@@ -0,0 +1,444 @@
+/*
+   Common Flash Interface probe code.
+   (C) 2000 Red Hat. GPL'd.
+   $Id: cfi_probe.c,v 1.86 2005/11/29 14:48:31 gleixner Exp $
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+
+#include <linux/mtd/xip.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
+#include <linux/mtd/gen_probe.h>
+
+//#define DEBUG_CFI
+
+#ifdef DEBUG_CFI
+static void print_cfi_ident(struct cfi_ident *);
+#endif
+
+static int cfi_probe_chip(struct map_info *map, __u32 base,
+			  unsigned long *chip_map, struct cfi_private *cfi);
+static int cfi_chip_setup(struct map_info *map, struct cfi_private *cfi);
+
+struct mtd_info *cfi_probe(struct map_info *map);
+
+#ifdef CONFIG_MTD_XIP
+
+/* only needed for short periods, so this is rather simple */
+#define xip_disable()	local_irq_disable()
+
+#define xip_allowed(base, map) \
+do { \
+	(void) map_read(map, base); \
+	asm volatile (".rep 8; nop; .endr"); \
+	local_irq_enable(); \
+} while (0)
+
+#define xip_enable(base, map, cfi) \
+do { \
+	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \
+	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \
+	xip_allowed(base, map); \
+} while (0)
+
+#define xip_disable_qry(base, map, cfi) \
+do { \
+	xip_disable(); \
+	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); \
+	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); \
+	cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL); \
+} while (0)
+
+#else
+
+#define xip_disable()			do { } while (0)
+#define xip_allowed(base, map)		do { } while (0)
+#define xip_enable(base, map, cfi)	do { } while (0)
+#define xip_disable_qry(base, map, cfi) do { } while (0)
+
+#endif
+
+/* check for QRY.
+   in: interleave,type,mode
+   ret: table index, <0 for error
+ */
+static int __xipram qry_present(struct map_info *map, __u32 base,
+				struct cfi_private *cfi)
+{
+	int osf = cfi->interleave * cfi->device_type;	// scale factor
+	map_word val[3];
+	map_word qry[3];
+
+	qry[0] = cfi_build_cmd('Q', map, cfi);
+	qry[1] = cfi_build_cmd('R', map, cfi);
+	qry[2] = cfi_build_cmd('Y', map, cfi);
+
+	val[0] = map_read(map, base + osf*0x10);
+	val[1] = map_read(map, base + osf*0x11);
+	val[2] = map_read(map, base + osf*0x12);
+
+	if (!map_word_equal(map, qry[0], val[0]))
+		return 0;
+
+	if (!map_word_equal(map, qry[1], val[1]))
+		return 0;
+
+	if (!map_word_equal(map, qry[2], val[2]))
+		return 0;
+
+	return 1; 	// "QRY" found
+}
+
+static int __xipram cfi_probe_chip(struct map_info *map, __u32 base,
+				   unsigned long *chip_map, struct cfi_private *cfi)
+{
+	int i;
+
+	if ((base + 0) >= map->size) {
+		printk(KERN_NOTICE
+			"Probe at base[0x00](0x%08lx) past the end of the map(0x%08lx)\n",
+			(unsigned long)base, map->size -1);
+		return 0;
+	}
+	if ((base + 0xff) >= map->size) {
+		printk(KERN_NOTICE
+			"Probe at base[0x55](0x%08lx) past the end of the map(0x%08lx)\n",
+			(unsigned long)base + 0x55, map->size -1);
+		return 0;
+	}
+
+	xip_disable();
+	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
+
+	if (!qry_present(map,base,cfi)) {
+		xip_enable(base, map, cfi);
+		return 0;
+	}
+
+	if (!cfi->numchips) {
+		/* This is the first time we're called. Set up the CFI
+		   stuff accordingly and return */
+		return cfi_chip_setup(map, cfi);
+	}
+
+	/* Check each previous chip to see if it's an alias */
+ 	for (i=0; i < (base >> cfi->chipshift); i++) {
+ 		unsigned long start;
+ 		if(!test_bit(i, chip_map)) {
+			/* Skip location; no valid chip at this address */
+ 			continue;
+ 		}
+ 		start = i << cfi->chipshift;
+		/* This chip should be in read mode if it's one
+		   we've already touched. */
+		if (qry_present(map, start, cfi)) {
+			/* Eep. This chip also had the QRY marker.
+			 * Is it an alias for the new one? */
+			cfi_send_gen_cmd(0xF0, 0, start, map, cfi, cfi->device_type, NULL);
+			cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL);
+
+			/* If the QRY marker goes away, it's an alias */
+			if (!qry_present(map, start, cfi)) {
+				xip_allowed(base, map);
+				printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
+				       map->name, base, start);
+				return 0;
+			}
+			/* Yes, it's actually got QRY for data. Most
+			 * unfortunate. Stick the new chip in read mode
+			 * too and if it's the same, assume it's an alias. */
+			/* FIXME: Use other modes to do a proper check */
+			cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+			cfi_send_gen_cmd(0xFF, 0, start, map, cfi, cfi->device_type, NULL);
+
+			if (qry_present(map, base, cfi)) {
+				xip_allowed(base, map);
+				printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
+				       map->name, base, start);
+				return 0;
+			}
+		}
+	}
+
+	/* OK, if we got to here, then none of the previous chips appear to
+	   be aliases for the current one. */
+	set_bit((base >> cfi->chipshift), chip_map); /* Update chip map */
+	cfi->numchips++;
+
+	/* Put it back into Read Mode */
+	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+	xip_allowed(base, map);
+
+	printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
+	       map->name, cfi->interleave, cfi->device_type*8, base,
+	       map->bankwidth*8);
+
+	return 1;
+}
+
+static int __xipram cfi_chip_setup(struct map_info *map,
+				   struct cfi_private *cfi)
+{
+	int ofs_factor = cfi->interleave*cfi->device_type;
+	__u32 base = 0;
+	int num_erase_regions = cfi_read_query(map, base + (0x10 + 28)*ofs_factor);
+	int i;
+
+	xip_enable(base, map, cfi);
+#ifdef DEBUG_CFI
+	printk("Number of erase regions: %d\n", num_erase_regions);
+#endif
+	if (!num_erase_regions)
+		return 0;
+
+	cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL);
+	if (!cfi->cfiq) {
+		printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name);
+		return 0;
+	}
+
+	memset(cfi->cfiq,0,sizeof(struct cfi_ident));
+
+	cfi->cfi_mode = CFI_MODE_CFI;
+
+	/* Read the CFI info structure */
+	xip_disable_qry(base, map, cfi);
+	for (i=0; i<(sizeof(struct cfi_ident) + num_erase_regions * 4); i++)
+		((unsigned char *)cfi->cfiq)[i] = cfi_read_query(map,base + (0x10 + i)*ofs_factor);
+
+	/* Note we put the device back into Read Mode BEFORE going into Auto
+	 * Select Mode, as some devices support nesting of modes, others
+	 * don't. This way should always work.
+	 * On cmdset 0001 the writes of 0xaa and 0x55 are not needed, and
+	 * so should be treated as nops or illegal (and so put the device
+	 * back into Read Mode, which is a nop in this case).
+	 */
+	cfi_send_gen_cmd(0xf0,     0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xaa, 0x555, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, 0x2aa, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x90, 0x555, base, map, cfi, cfi->device_type, NULL);
+	cfi->mfr = cfi_read_query16(map, base);
+	cfi->id = cfi_read_query16(map, base + ofs_factor);
+
+	/* Put it back into Read Mode */
+	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+	/* ... even if it's an Intel chip */
+	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+	xip_allowed(base, map);
+
+	/* Do any necessary byteswapping */
+	cfi->cfiq->P_ID = le16_to_cpu(cfi->cfiq->P_ID);
+
+	cfi->cfiq->P_ADR = le16_to_cpu(cfi->cfiq->P_ADR);
+	cfi->cfiq->A_ID = le16_to_cpu(cfi->cfiq->A_ID);
+	cfi->cfiq->A_ADR = le16_to_cpu(cfi->cfiq->A_ADR);
+	cfi->cfiq->InterfaceDesc = le16_to_cpu(cfi->cfiq->InterfaceDesc);
+	cfi->cfiq->MaxBufWriteSize = le16_to_cpu(cfi->cfiq->MaxBufWriteSize);
+
+#ifdef DEBUG_CFI
+	/* Dump the information therein */
+	print_cfi_ident(cfi->cfiq);
+#endif
+
+	for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {
+		cfi->cfiq->EraseRegionInfo[i] = le32_to_cpu(cfi->cfiq->EraseRegionInfo[i]);
+
+#ifdef DEBUG_CFI
+		printk("  Erase Region #%d: BlockSize 0x%4.4X bytes, %d blocks\n",
+		       i, (cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff,
+		       (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1);
+#endif
+	}
+
+	printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
+	       map->name, cfi->interleave, cfi->device_type*8, base,
+	       map->bankwidth*8);
+
+	return 1;
+}
+
+#ifdef DEBUG_CFI
+static char *vendorname(__u16 vendor)
+{
+	switch (vendor) {
+	case P_ID_NONE:
+		return "None";
+
+	case P_ID_INTEL_EXT:
+		return "Intel/Sharp Extended";
+
+	case P_ID_AMD_STD:
+		return "AMD/Fujitsu Standard";
+
+	case P_ID_INTEL_STD:
+		return "Intel/Sharp Standard";
+
+	case P_ID_AMD_EXT:
+		return "AMD/Fujitsu Extended";
+
+	case P_ID_WINBOND:
+		return "Winbond Standard";
+
+	case P_ID_ST_ADV:
+		return "ST Advanced";
+
+	case P_ID_MITSUBISHI_STD:
+		return "Mitsubishi Standard";
+
+	case P_ID_MITSUBISHI_EXT:
+		return "Mitsubishi Extended";
+
+	case P_ID_SST_PAGE:
+		return "SST Page Write";
+
+	case P_ID_INTEL_PERFORMANCE:
+		return "Intel Performance Code";
+
+	case P_ID_INTEL_DATA:
+		return "Intel Data";
+
+	case P_ID_RESERVED:
+		return "Not Allowed / Reserved for Future Use";
+
+	default:
+		return "Unknown";
+	}
+}
+
+
+static void print_cfi_ident(struct cfi_ident *cfip)
+{
+#if 0
+	if (cfip->qry[0] != 'Q' || cfip->qry[1] != 'R' || cfip->qry[2] != 'Y') {
+		printk("Invalid CFI ident structure.\n");
+		return;
+	}
+#endif
+	printk("Primary Vendor Command Set: %4.4X (%s)\n", cfip->P_ID, vendorname(cfip->P_ID));
+	if (cfip->P_ADR)
+		printk("Primary Algorithm Table at %4.4X\n", cfip->P_ADR);
+	else
+		printk("No Primary Algorithm Table\n");
+
+	printk("Alternative Vendor Command Set: %4.4X (%s)\n", cfip->A_ID, vendorname(cfip->A_ID));
+	if (cfip->A_ADR)
+		printk("Alternate Algorithm Table at %4.4X\n", cfip->A_ADR);
+	else
+		printk("No Alternate Algorithm Table\n");
+
+
+	printk("Vcc Minimum: %2d.%d V\n", cfip->VccMin >> 4, cfip->VccMin & 0xf);
+	printk("Vcc Maximum: %2d.%d V\n", cfip->VccMax >> 4, cfip->VccMax & 0xf);
+	if (cfip->VppMin) {
+		printk("Vpp Minimum: %2d.%d V\n", cfip->VppMin >> 4, cfip->VppMin & 0xf);
+		printk("Vpp Maximum: %2d.%d V\n", cfip->VppMax >> 4, cfip->VppMax & 0xf);
+	}
+	else
+		printk("No Vpp line\n");
+
+	printk("Typical byte/word write timeout: %d µs\n", 1<<cfip->WordWriteTimeoutTyp);
+	printk("Maximum byte/word write timeout: %d µs\n", (1<<cfip->WordWriteTimeoutMax) * (1<<cfip->WordWriteTimeoutTyp));
+
+	if (cfip->BufWriteTimeoutTyp || cfip->BufWriteTimeoutMax) {
+		printk("Typical full buffer write timeout: %d µs\n", 1<<cfip->BufWriteTimeoutTyp);
+		printk("Maximum full buffer write timeout: %d µs\n", (1<<cfip->BufWriteTimeoutMax) * (1<<cfip->BufWriteTimeoutTyp));
+	}
+	else
+		printk("Full buffer write not supported\n");
+
+	printk("Typical block erase timeout: %d ms\n", 1<<cfip->BlockEraseTimeoutTyp);
+	printk("Maximum block erase timeout: %d ms\n", (1<<cfip->BlockEraseTimeoutMax) * (1<<cfip->BlockEraseTimeoutTyp));
+	if (cfip->ChipEraseTimeoutTyp || cfip->ChipEraseTimeoutMax) {
+		printk("Typical chip erase timeout: %d ms\n", 1<<cfip->ChipEraseTimeoutTyp);
+		printk("Maximum chip erase timeout: %d ms\n", (1<<cfip->ChipEraseTimeoutMax) * (1<<cfip->ChipEraseTimeoutTyp));
+	}
+	else
+		printk("Chip erase not supported\n");
+
+	printk("Device size: 0x%X bytes (%d MiB)\n", 1 << cfip->DevSize, 1<< (cfip->DevSize - 20));
+	printk("Flash Device Interface description: 0x%4.4X\n", cfip->InterfaceDesc);
+	switch(cfip->InterfaceDesc) {
+	case 0:
+		printk("  - x8-only asynchronous interface\n");
+		break;
+
+	case 1:
+		printk("  - x16-only asynchronous interface\n");
+		break;
+
+	case 2:
+		printk("  - supports x8 and x16 via BYTE# with asynchronous interface\n");
+		break;
+
+	case 3:
+		printk("  - x32-only asynchronous interface\n");
+		break;
+
+	case 4:
+		printk("  - supports x16 and x32 via Word# with asynchronous interface\n");
+		break;
+
+	case 65535:
+		printk("  - Not Allowed / Reserved\n");
+		break;
+
+	default:
+		printk("  - Unknown\n");
+		break;
+	}
+
+	printk("Max. bytes in buffer write: 0x%x\n", 1<< cfip->MaxBufWriteSize);
+	printk("Number of Erase Block Regions: %d\n", cfip->NumEraseRegions);
+
+}
+#endif /* DEBUG_CFI */
+
+static struct chip_probe cfi_chip_probe = {
+	.name		= "CFI",
+	.probe_chip	= cfi_probe_chip
+};
+
+struct mtd_info *cfi_probe(struct map_info *map)
+{
+	/*
+	 * Just use the generic probe stuff to call our CFI-specific
+	 * chip_probe routine in all the possible permutations, etc.
+	 */
+	return mtd_do_chip_probe(map, &cfi_chip_probe);
+}
+
+static struct mtd_chip_driver cfi_chipdrv = {
+	.probe		= cfi_probe,
+	.name		= "cfi_probe",
+	.module		= THIS_MODULE
+};
+
+static int __init cfi_probe_init(void)
+{
+	register_mtd_chip_driver(&cfi_chipdrv);
+	return 0;
+}
+
+static void __exit cfi_probe_exit(void)
+{
+	unregister_mtd_chip_driver(&cfi_chipdrv);
+}
+
+module_init(cfi_probe_init);
+module_exit(cfi_probe_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");
+MODULE_DESCRIPTION("Probe code for CFI-compliant flash chips");
diff -Nur linux-2.6.21.1/drivers/net/Kconfig linux-2.6.21.1-owrt/drivers/net/Kconfig
--- linux-2.6.21.1/drivers/net/Kconfig	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/drivers/net/Kconfig	2007-05-23 23:37:01.000000000 +0200
@@ -201,6 +201,19 @@
 
 source "drivers/net/arm/Kconfig"
 
+config AR2313
+	tristate "AR2313 Ethernet support"
+	depends on NET_ETHERNET && MACH_ARUBA
+	help
+	  Support for the AR2313 Ethernet part on Aruba AP60/61
+
+config IDT_RC32434_ETH
+        tristate "IDT RC32434 Local Ethernet support"
+        depends on NET_ETHERNET
+        help
+        IDT RC32434 has one local ethernet port. Say Y here to enable it.
+        To compile this driver as a module, choose M here.
+
 config MACE
 	tristate "MACE (Power Mac ethernet) support"
 	depends on NET_ETHERNET && PPC_PMAC && PPC32
diff -Nur linux-2.6.21.1/drivers/net/Kconfig.orig linux-2.6.21.1-owrt/drivers/net/Kconfig.orig
--- linux-2.6.21.1/drivers/net/Kconfig.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.21.1-owrt/drivers/net/Kconfig.orig	2007-05-23 23:34:01.000000000 +0200
@@ -0,0 +1,2952 @@
+
+#
+# Network device configuration
+#
+
+menu "Network device support"
+	depends on NET
+
+config NETDEVICES
+	default y if UML
+	bool "Network device support"
+	---help---
+	  You can say N here if you don't intend to connect your Linux box to
+	  any other computer at all.
+
+	  You'll have to say Y if your computer contains a network card that
+	  you want to use under Linux. If you are going to run SLIP or PPP over
+	  telephone line or null modem cable you need say Y here. Connecting
+	  two machines with parallel ports using PLIP needs this, as well as
+	  AX.25/KISS for sending Internet traffic over amateur radio links.
+
+	  See also "The Linux Network Administrator's Guide" by Olaf Kirch and
+	  Terry Dawson. Available at <http://www.tldp.org/guides.html>.
+
+	  If unsure, say Y.
+
+# All the following symbols are dependent on NETDEVICES - do not repeat
+# that for each of the symbols.
+if NETDEVICES
+
+config IFB
+	tristate "Intermediate Functional Block support"
+	depends on NET_CLS_ACT
+	---help---
+	  This is an intermediate driver that allows sharing of
+	  resources.
+	  To compile this driver as a module, choose M here: the module
+	  will be called ifb.  If you want to use more than one ifb
+	  device at a time, you need to compile this driver as a module.
+	  Instead of 'ifb', the devices will then be called 'ifb0',
+	  'ifb1' etc.
+	  Look at the iproute2 documentation directory for usage etc
+
+config DUMMY
+	tristate "Dummy net driver support"
+	---help---
+	  This is essentially a bit-bucket device (i.e. traffic you send to
+	  this device is consigned into oblivion) with a configurable IP
+	  address. It is most commonly used in order to make your currently
+	  inactive SLIP address seem like a real address for local programs.
+	  If you use SLIP or PPP, you might want to say Y here. Since this
+	  thing often comes in handy, the default is Y. It won't enlarge your
+	  kernel either. What a deal. Read about it in the Network
+	  Administrator's Guide, available from
+	  <http://www.tldp.org/docs.html#guide>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called dummy.  If you want to use more than one dummy
+	  device at a time, you need to compile this driver as a module.
+	  Instead of 'dummy', the devices will then be called 'dummy0',
+	  'dummy1' etc.
+
+config BONDING
+	tristate "Bonding driver support"
+	depends on INET
+	---help---
+	  Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
+	  Channels together. This is called 'Etherchannel' by Cisco,
+	  'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
+
+	  The driver supports multiple bonding modes to allow for both high
+	  performance and high availability operation.
+
+	  Refer to <file:Documentation/networking/bonding.txt> for more
+	  information.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called bonding.
+
+config EQUALIZER
+	tristate "EQL (serial line load balancing) support"
+	---help---
+	  If you have two serial connections to some other computer (this
+	  usually requires two modems and two telephone lines) and you use
+	  SLIP (the protocol for sending Internet traffic over telephone
+	  lines) or PPP (a better SLIP) on them, you can make them behave like
+	  one double speed connection using this driver.  Naturally, this has
+	  to be supported at the other end as well, either with a similar EQL
+	  Linux driver or with a Livingston Portmaster 2e.
+
+	  Say Y if you want this and read
+	  <file:Documentation/networking/eql.txt>.  You may also want to read
+	  section 6.2 of the NET-3-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called eql.  If unsure, say N.
+
+config TUN
+	tristate "Universal TUN/TAP device driver support"
+	select CRC32
+	---help---
+	  TUN/TAP provides packet reception and transmission for user space
+	  programs.  It can be viewed as a simple Point-to-Point or Ethernet
+	  device, which instead of receiving packets from a physical media,
+	  receives them from user space program and instead of sending packets
+	  via physical media writes them to the user space program.
+
+	  When a program opens /dev/net/tun, driver creates and registers
+	  corresponding net device tunX or tapX.  After a program closed above
+	  devices, driver will automatically delete tunXX or tapXX device and
+	  all routes corresponding to it.
+
+	  Please read <file:Documentation/networking/tuntap.txt> for more
+	  information.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called tun.
+
+	  If you don't know what to use this for, you don't need it.
+
+config NET_SB1000
+	tristate "General Instruments Surfboard 1000"
+	depends on PNP
+	---help---
+	  This is a driver for the General Instrument (also known as
+	  NextLevel) SURFboard 1000 internal
+	  cable modem. This is an ISA card which is used by a number of cable
+	  TV companies to provide cable modem access. It's a one-way
+	  downstream-only cable modem, meaning that your upstream net link is
+	  provided by your regular phone modem.
+
+	  At present this driver only compiles as a module, so say M here if
+	  you have this card. The module will be called sb1000. Then read
+	  <file:Documentation/networking/README.sb1000> for information on how
+	  to use this module, as it needs special ppp scripts for establishing
+	  a connection. Further documentation and the necessary scripts can be
+	  found at:
+
+	  <http://www.jacksonville.net/~fventuri/>
+	  <http://home.adelphia.net/~siglercm/sb1000.html>
+	  <http://linuxpower.cx/~cable/>
+
+	  If you don't have this card, of course say N.
+
+source "drivers/net/arcnet/Kconfig"
+
+source "drivers/net/phy/Kconfig"
+
+#
+#	Ethernet
+#
+
+menu "Ethernet (10 or 100Mbit)"
+	depends on !UML
+
+config NET_ETHERNET
+	bool "Ethernet (10 or 100Mbit)"
+	---help---
+	  Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
+	  type of Local Area Network (LAN) in universities and companies.
+
+	  Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
+	  coaxial cable, linking computers in a chain), 10BASE-T or twisted
+	  pair (10 Mbps over twisted pair cable, linking computers to central
+	  hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
+	  100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
+	  100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
+	  cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
+	  [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
+	  Ethernet (1 Gbps over optical fiber or short copper links).
+
+	  If your Linux machine will be connected to an Ethernet and you have
+	  an Ethernet network interface card (NIC) installed in your computer,
+	  say Y here and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>. You will then also have
+	  to say Y to the driver for your particular NIC.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Ethernet network cards. If unsure, say N.
+
+config MII
+	tristate "Generic Media Independent Interface device support"
+	depends on NET_ETHERNET
+	help
+	  Most ethernet controllers have MII transceiver either as an external
+	  or internal device.  It is safe to say Y or M here even if your
+	  ethernet card lack MII.
+
+config MACB
+	tristate "Atmel MACB support"
+	depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
+	select MII
+	help
+	  The Atmel MACB ethernet interface is found on many AT32 and AT91
+	  parts. Say Y to include support for the MACB chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called macb.
+
+source "drivers/net/arm/Kconfig"
+
+config IDT_RC32434_ETH
+        tristate "IDT RC32434 Local Ethernet support"
+        depends on NET_ETHERNET
+        help
+        IDT RC32434 has one local ethernet port. Say Y here to enable it.
+        To compile this driver as a module, choose M here.
+
+config MACE
+	tristate "MACE (Power Mac ethernet) support"
+	depends on NET_ETHERNET && PPC_PMAC && PPC32
+	select CRC32
+	help
+	  Power Macintoshes and clones with Ethernet built-in on the
+	  motherboard will usually use a MACE (Medium Access Control for
+	  Ethernet) interface. Say Y to include support for the MACE chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mace.
+
+config MACE_AAUI_PORT
+	bool "Use AAUI port instead of TP by default"
+	depends on MACE
+	help
+	  Some Apple machines (notably the Apple Network Server) which use the
+	  MACE ethernet chip have an Apple AUI port (small 15-pin connector),
+	  instead of an 8-pin RJ45 connector for twisted-pair ethernet.  Say
+	  Y here if you have such a machine.  If unsure, say N.
+	  The driver will default to AAUI on ANS anyway, and if you use it as
+	  a module, you can provide the port_aaui=0|1 to force the driver.
+
+config BMAC
+	tristate "BMAC (G3 ethernet) support"
+	depends on NET_ETHERNET && PPC_PMAC && PPC32
+	select CRC32
+	help
+	  Say Y for support of BMAC Ethernet interfaces. These are used on G3
+	  computers.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called bmac.
+
+config ARIADNE
+	tristate "Ariadne support"
+	depends on NET_ETHERNET && ZORRO
+	help
+	  If you have a Village Tronic Ariadne Ethernet adapter, say Y.
+	  Otherwise, say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ariadne.
+
+config A2065
+	tristate "A2065 support"
+	depends on NET_ETHERNET && ZORRO
+	select CRC32
+	help
+	  If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
+	  say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called a2065.
+
+config HYDRA
+	tristate "Hydra support"
+	depends on NET_ETHERNET && ZORRO
+	select CRC32
+	help
+	  If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called hydra.
+
+config ZORRO8390
+	tristate "Zorro NS8390-based Ethernet support"
+	depends on NET_ETHERNET && ZORRO
+	select CRC32
+	help
+	  This driver is for Zorro Ethernet cards using an NS8390-compatible
+	  chipset, like the Village Tronic Ariadne II and the Individual
+	  Computers X-Surf Ethernet cards. If you have such a card, say Y.
+	  Otherwise, say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called zorro8390.
+
+config APNE
+	tristate "PCMCIA NE2000 support"
+	depends on NET_ETHERNET && AMIGA_PCMCIA
+	select CRC32
+	help
+	  If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
+	  say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called apne.
+
+config APOLLO_ELPLUS
+	tristate "Apollo 3c505 support"
+	depends on NET_ETHERNET && APOLLO
+	help
+	  Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card.
+	  If you don't have one made for Apollos, you can use one from a PC,
+	  except that your Apollo won't be able to boot from it (because the
+	  code in the ROM will be for a PC).
+
+config MAC8390
+	bool "Macintosh NS 8390 based ethernet cards"
+	depends on NET_ETHERNET && MAC
+	select CRC32
+	help
+	  If you want to include a driver to support Nubus or LC-PDS
+	  Ethernet cards using an NS8390 chipset or its equivalent, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+config MAC89x0
+	tristate "Macintosh CS89x0 based ethernet cards"
+	depends on NET_ETHERNET && MAC && BROKEN
+	---help---
+	  Support for CS89x0 chipset based Ethernet cards.  If you have a
+	  Nubus or LC-PDS network (Ethernet) card of this type, say Y and
+	  read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  This module will
+	  be called mac89x0.
+
+config MACSONIC
+	tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
+	depends on NET_ETHERNET && MAC
+	---help---
+	  Support for NatSemi SONIC based Ethernet devices.  This includes
+	  the onboard Ethernet in many Quadras as well as some LC-PDS,
+	  a few Nubus and all known Comm Slot Ethernet cards.  If you have
+	  one of these say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  This module will
+	  be called macsonic.
+
+config MACMACE
+	bool "Macintosh (AV) onboard MACE ethernet (EXPERIMENTAL)"
+	depends on NET_ETHERNET && MAC && EXPERIMENTAL
+	select CRC32
+	help
+	  Support for the onboard AMD 79C940 MACE Ethernet controller used in
+	  the 660AV and 840AV Macintosh.  If you have one of these Macintoshes
+	  say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+config MVME147_NET
+	tristate "MVME147 (Lance) Ethernet support"
+	depends on NET_ETHERNET && MVME147
+	select CRC32
+	help
+	  Support for the on-board Ethernet interface on the Motorola MVME147
+	  single-board computer.  Say Y here to include the
+	  driver for this chip in your kernel.
+	  To compile this driver as a module, choose M here.
+
+config MVME16x_NET
+	tristate "MVME16x Ethernet support"
+	depends on NET_ETHERNET && MVME16x
+	help
+	  This is the driver for the Ethernet interface on the Motorola
+	  MVME162, 166, 167, 172 and 177 boards.  Say Y here to include the
+	  driver for this chip in your kernel.
+	  To compile this driver as a module, choose M here.
+
+config BVME6000_NET
+	tristate "BVME6000 Ethernet support"
+	depends on NET_ETHERNET && BVME6000
+	help
+	  This is the driver for the Ethernet interface on BVME4000 and
+	  BVME6000 VME boards.  Say Y here to include the driver for this chip
+	  in your kernel.
+	  To compile this driver as a module, choose M here.
+
+config ATARILANCE
+	tristate "Atari Lance support"
+	depends on NET_ETHERNET && ATARI
+	help
+	  Say Y to include support for several Atari Ethernet adapters based
+	  on the AMD Lance chipset: RieblCard (with or without battery), or
+	  PAMCard VME (also the version by Rhotron, with different addresses).
+
+config ATARI_BIONET
+	tristate "BioNet-100 support"
+	depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
+	help
+	  Say Y to include support for BioData's BioNet-100 Ethernet adapter
+	  for the ACSI port. The driver works (has to work...) with a polled
+	  I/O scheme, so it's rather slow :-(
+
+config ATARI_PAMSNET
+	tristate "PAMsNet support"
+	depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
+	help
+	  Say Y to include support for the PAMsNet Ethernet adapter for the
+	  ACSI port ("ACSI node"). The driver works (has to work...) with a
+	  polled I/O scheme, so it's rather slow :-(
+
+config SUN3LANCE
+	tristate "Sun3/Sun3x on-board LANCE support"
+	depends on NET_ETHERNET && (SUN3 || SUN3X)
+	help
+	  Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
+	  featured an AMD Lance 10Mbit Ethernet controller on board; say Y
+	  here to compile in the Linux driver for this and enable Ethernet.
+	  General Linux information on the Sun 3 and 3x series (now
+	  discontinued) is at
+	  <http://www.angelfire.com/ca2/tech68k/sun3.html>.
+
+	  If you're not building a kernel for a Sun 3, say N.
+
+config SUN3_82586
+	bool "Sun3 on-board Intel 82586 support"
+	depends on NET_ETHERNET && SUN3
+	help
+	  This driver enables support for the on-board Intel 82586 based
+	  Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards.  Note
+	  that this driver does not support 82586-based adapters on additional
+	  VME boards.
+
+config HPLANCE
+	bool "HP on-board LANCE support"
+	depends on NET_ETHERNET && DIO
+	select CRC32
+	help
+	  If you want to use the builtin "LANCE" Ethernet controller on an
+	  HP300 machine, say Y here.
+
+config LASI_82596
+	tristate "Lasi ethernet"
+	depends on NET_ETHERNET && GSC
+	help
+	  Say Y here to support the builtin Intel 82596 ethernet controller
+	  found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
+
+config MIPS_JAZZ_SONIC
+	tristate "MIPS JAZZ onboard SONIC Ethernet support"
+	depends on NET_ETHERNET && MACH_JAZZ
+	help
+	  This is the driver for the onboard card of MIPS Magnum 4000,
+	  Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
+
+config MIPS_AU1X00_ENET
+	bool "MIPS AU1000 Ethernet support"
+	depends on NET_ETHERNET && SOC_AU1X00
+	select PHYLIB
+	select CRC32
+	help
+	  If you have an Alchemy Semi AU1X00 based system
+	  say Y.  Otherwise, say N.
+
+config NET_SB1250_MAC
+	tristate "SB1250 Ethernet support"
+	depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
+
+config SGI_IOC3_ETH
+	bool "SGI IOC3 Ethernet"
+	depends on NET_ETHERNET && PCI && SGI_IP27
+	select CRC32
+	select MII
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+config SGI_IOC3_ETH_HW_RX_CSUM
+	bool "Receive hardware checksums"
+	depends on SGI_IOC3_ETH && INET
+	default y
+	help
+	  The SGI IOC3 network adapter supports TCP and UDP checksums in
+	  hardware to offload processing of these checksums from the CPU.  At
+	  the moment only acceleration of IPv4 is supported.  This option
+	  enables offloading for checksums on receive.  If unsure, say Y.
+
+config SGI_IOC3_ETH_HW_TX_CSUM
+	bool "Transmit hardware checksums"
+	depends on SGI_IOC3_ETH && INET
+	default y
+	help
+	  The SGI IOC3 network adapter supports TCP and UDP checksums in
+	  hardware to offload processing of these checksums from the CPU.  At
+	  the moment only acceleration of IPv4 is supported.  This option
+	  enables offloading for checksums on transmit.  If unsure, say Y.
+
+config MIPS_SIM_NET
+	tristate "MIPS simulator Network device (EXPERIMENTAL)"
+	depends on MIPS_SIM && EXPERIMENTAL
+	help
+	  The MIPSNET device is a simple Ethernet network device which is
+	  emulated by the MIPS Simulator.
+	  If you are not using a MIPSsim or are unsure, say N.
+
+config SGI_O2MACE_ETH
+	tristate "SGI O2 MACE Fast Ethernet support"
+	depends on NET_ETHERNET && SGI_IP32=y
+
+config STNIC
+	tristate "National DP83902AV  support"
+	depends on NET_ETHERNET && SUPERH
+	select CRC32
+	help
+	  Support for cards based on the National Semiconductor DP83902AV
+	  ST-NIC Serial Network Interface Controller for Twisted Pair.  This
+	  is a 10Mbit/sec Ethernet controller.  Product overview and specs at
+	  <http://www.national.com/pf/DP/DP83902A.html>.
+
+	  If unsure, say N.
+
+config SUNLANCE
+	tristate "Sun LANCE support"
+	depends on NET_ETHERNET && SBUS
+	select CRC32
+	help
+	  This driver supports the "le" interface present on all 32-bit Sparc
+	  systems, on some older Ultra systems and as an Sbus option.  These
+	  cards are based on the AMD Lance chipset, which is better known
+	  via the NE2100 cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sunlance.
+
+config HAPPYMEAL
+	tristate "Sun Happy Meal 10/100baseT support"
+	depends on NET_ETHERNET && (SBUS || PCI)
+	select CRC32
+	help
+	  This driver supports the "hme" interface present on most Ultra
+	  systems and as an option on older Sbus systems. This driver supports
+	  both PCI and Sbus devices. This driver also supports the "qfe" quad
+	  100baseT device available in both PCI and Sbus configurations.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sunhme.
+
+config SUNBMAC
+	tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
+	depends on NET_ETHERNET && SBUS && EXPERIMENTAL
+	select CRC32
+	help
+	  This driver supports the "be" interface available as an Sbus option.
+	  This is Sun's older 100baseT Ethernet device.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sunbmac.
+
+config SUNQE
+	tristate "Sun QuadEthernet support"
+	depends on NET_ETHERNET && SBUS
+	select CRC32
+	help
+	  This driver supports the "qe" 10baseT Ethernet device, available as
+	  an Sbus option. Note that this is not the same as Quad FastEthernet
+	  "qfe" which is supported by the Happy Meal driver instead.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sunqe.
+
+config SUNGEM
+	tristate "Sun GEM support"
+	depends on NET_ETHERNET && PCI
+	select CRC32
+	help
+	  Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0.  See also
+	  <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
+
+config CASSINI
+	tristate "Sun Cassini support"
+	depends on NET_ETHERNET && PCI
+	select CRC32
+	help
+	  Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
+	  <http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf>
+
+config NET_VENDOR_3COM
+	bool "3COM cards"
+	depends on NET_ETHERNET && (ISA || EISA || MCA || PCI)
+	help
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about 3COM cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+config EL1
+	tristate "3c501 \"EtherLink\" support"
+	depends on NET_VENDOR_3COM && ISA
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.  Also, consider buying a
+	  new card, since the 3c501 is slow, broken, and obsolete: you will
+	  have problems.  Some people suggest to ping ("man ping") a nearby
+	  machine every minute ("man cron") when using this card.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called 3c501.
+
+config EL2
+	tristate "3c503 \"EtherLink II\" support"
+	depends on NET_VENDOR_3COM && ISA
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called 3c503.
+
+config ELPLUS
+	tristate "3c505 \"EtherLink Plus\" support"
+	depends on NET_VENDOR_3COM && ISA && ISA_DMA_API
+	---help---
+	  Information about this network (Ethernet) card can be found in
+	  <file:Documentation/networking/3c505.txt>.  If you have a card of
+	  this type, say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called 3c505.
+
+config EL16
+	tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
+	depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called 3c507.
+
+config EL3
+	tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
+	depends on NET_VENDOR_3COM && (ISA || EISA || MCA)
+	---help---
+	  If you have a network (Ethernet) card belonging to the 3Com
+	  EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
+	  from <http://www.tldp.org/docs.html#howto>.
+
+	  If your card is not working you may need to use the DOS
+	  setup disk to disable Plug & Play mode, and to select the default
+	  media type.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called 3c509.
+
+config 3C515
+	tristate "3c515 ISA \"Fast EtherLink\""
+	depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API
+	help
+	  If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
+	  network card, say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called 3c515.
+
+config ELMC
+	tristate "3c523 \"EtherLink/MC\" support"
+	depends on NET_VENDOR_3COM && MCA_LEGACY
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called 3c523.
+
+config ELMC_II
+	tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
+	depends on NET_VENDOR_3COM && MCA && MCA_LEGACY
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called 3c527.
+
+config VORTEX
+	tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
+	depends on NET_VENDOR_3COM && (PCI || EISA)
+	select MII
+	---help---
+	  This option enables driver support for a large number of 10Mbps and
+	  10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
+
+	  "Vortex"    (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
+	  "Boomerang" (EtherLink XL 3c900 or 3c905)            PCI
+	  "Cyclone"   (3c540/3c900/3c905/3c980/3c575/3c656)    PCI and Cardbus
+	  "Tornado"   (3c905)                                  PCI
+	  "Hurricane" (3c555/3cSOHO)                           PCI
+
+	  If you have such a card, say Y and read the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>. More
+	  specific information is in
+	  <file:Documentation/networking/vortex.txt> and in the comments at
+	  the beginning of <file:drivers/net/3c59x.c>.
+
+	  To compile this support as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.
+
+config TYPHOON
+	tristate "3cr990 series \"Typhoon\" support"
+	depends on NET_VENDOR_3COM && PCI
+	select CRC32
+	---help---
+	  This option enables driver support for the 3cr990 series of cards:
+
+	  3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
+	  3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
+	  3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
+
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called typhoon.
+
+config LANCE
+	tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
+	depends on NET_ETHERNET && ISA && ISA_DMA_API
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
+	  of this type.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called lance.  This is recommended.
+
+config NET_VENDOR_SMC
+	bool "Western Digital/SMC cards"
+	depends on NET_ETHERNET && (ISA || MCA || EISA || MAC)
+	help
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Western Digital cards. If you say Y, you will be
+	  asked for your specific card in the following questions.
+
+config WD80x3
+	tristate "WD80*3 support"
+	depends on NET_VENDOR_SMC && ISA
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called wd.
+
+config ULTRAMCA
+	tristate "SMC Ultra MCA support"
+	depends on NET_VENDOR_SMC && MCA
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type and are running
+	  an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called smc-mca.
+
+config ULTRA
+	tristate "SMC Ultra support"
+	depends on NET_VENDOR_SMC && ISA
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Important: There have been many reports that, with some motherboards
+	  mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
+	  such as some BusLogic models) causes corruption problems with many
+	  operating systems. The Linux smc-ultra driver has a work-around for
+	  this but keep it in mind if you have such a SCSI card and have
+	  problems.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called smc-ultra.
+
+config ULTRA32
+	tristate "SMC Ultra32 EISA support"
+	depends on NET_VENDOR_SMC && EISA
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called smc-ultra32.
+
+config SMC91X
+	tristate "SMC 91C9x/91C1xxx support"
+	select CRC32
+	select MII
+	depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00)
+	help
+	  This is a driver for SMC's 91x series of Ethernet chipsets,
+	  including the SMC91C94 and the SMC91C111. Say Y if you want it
+	  compiled into the kernel, and read the file
+	  <file:Documentation/networking/smc9.txt>  and the Ethernet-HOWTO,
+	  available from  <http://www.linuxdoc.org/docs.html#howto>.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called smc91x.  If you want to compile it as a
+	  module, say M here and read <file:Documentation/modules.txt> as well
+	  as <file:Documentation/networking/net-modules.txt>.
+
+config SMC9194
+	tristate "SMC 9194 support"
+	depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
+	select CRC32
+	---help---
+	  This is support for the SMC9xxx based Ethernet cards. Choose this
+	  option if you have a DELL laptop with the docking station, or
+	  another SMC9192/9194 based chipset.  Say Y if you want it compiled
+	  into the kernel, and read the file
+	  <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called smc9194.
+
+config NET_NETX
+	tristate "NetX Ethernet support"
+	select MII
+	depends on NET_ETHERNET && ARCH_NETX
+	help
+	  This is support for the Hilscher netX builtin Ethernet ports
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called netx-eth.
+
+config DM9000
+	tristate "DM9000 support"
+	depends on (ARM || MIPS) && NET_ETHERNET
+	select CRC32
+	select MII
+	---help---
+	  Support for DM9000 chipset.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module will be
+	  called dm9000.
+
+config SMC911X
+	tristate "SMSC LAN911[5678] support"
+	select CRC32
+	select MII
+	depends on NET_ETHERNET && ARCH_PXA
+	help
+	  This is a driver for SMSC's LAN911x series of Ethernet chipsets
+	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
+	  Say Y if you want it compiled into the kernel, 
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>.
+
+	  This driver is also available as a module. The module will be 
+	  called smc911x.  If you want to compile it as a module, say M 
+	  here and read <file:Documentation/modules.txt>
+
+config NET_VENDOR_RACAL
+	bool "Racal-Interlan (Micom) NI cards"
+	depends on NET_ETHERNET && ISA
+	help
+	  If you have a network (Ethernet) card belonging to this class, such
+	  as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about NI cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+config NI5010
+	tristate "NI5010 support (EXPERIMENTAL)"
+	depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>. Note that this is still
+	  experimental code.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called ni5010.
+
+config NI52
+	tristate "NI5210 support"
+	depends on NET_VENDOR_RACAL && ISA
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called ni52.
+
+config NI65
+	tristate "NI6510 support"
+	depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called ni65.
+
+source "drivers/net/tulip/Kconfig"
+
+config AT1700
+	tristate "AT1700/1720 support (EXPERIMENTAL)"
+	depends on NET_ETHERNET && (ISA || MCA_LEGACY) && EXPERIMENTAL
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called at1700.
+
+config DEPCA
+	tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
+	depends on NET_ETHERNET && (ISA || EISA || MCA)
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto> as well as
+	  <file:drivers/net/depca.c>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called depca.
+
+config HP100
+	tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
+	depends on NET_ETHERNET && (ISA || EISA || PCI)
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called hp100.
+
+config NET_ISA
+	bool "Other ISA cards"
+	depends on NET_ETHERNET && ISA
+	---help---
+	  If your network (Ethernet) card hasn't been mentioned yet and its
+	  bus system (that's the way the cards talks to the other components
+	  of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y.
+	  Make sure you know the name of your card. Read the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  If unsure, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the remaining ISA network card questions. If you say Y, you will be
+	  asked for your specific card in the following questions.
+
+config E2100
+	tristate "Cabletron E21xx support"
+	depends on NET_ISA
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called e2100.
+
+config EWRK3
+	tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
+	depends on NET_ISA
+	select CRC32
+	---help---
+	  This driver supports the DE203, DE204 and DE205 network (Ethernet)
+	  cards. If this is for you, say Y and read
+	  <file:Documentation/networking/ewrk3.txt> in the kernel source as
+	  well as the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called ewrk3.
+
+config EEXPRESS
+	tristate "EtherExpress 16 support"
+	depends on NET_ISA
+	---help---
+	  If you have an EtherExpress16 network (Ethernet) card, say Y and
+	  read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.  Note that the Intel
+	  EtherExpress16 card used to be regarded as a very poor choice
+	  because the driver was very unreliable. We now have a new driver
+	  that should do better.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called eexpress.
+
+config EEXPRESS_PRO
+	tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
+	depends on NET_ISA
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y. This
+	  driver supports Intel i82595{FX,TX} based boards. Note however
+	  that the EtherExpress PRO/100 Ethernet card has its own separate
+	  driver.  Please read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called eepro.
+
+config HPLAN_PLUS
+	tristate "HP PCLAN+ (27247B and 27252A) support"
+	depends on NET_ISA
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called hp-plus.
+
+config HPLAN
+	tristate "HP PCLAN (27245 and other 27xxx series) support"
+	depends on NET_ISA
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called hp.
+
+config LP486E
+	tristate "LP486E on board Ethernet"
+	depends on NET_ISA
+	help
+	  Say Y here to support the 82596-based on-board Ethernet controller
+	  for the Panther motherboard, which is one of the two shipped in the
+	  Intel Professional Workstation.
+
+config ETH16I
+	tristate "ICL EtherTeam 16i/32 support"
+	depends on NET_ISA
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called eth16i.
+
+config NE2000
+	tristate "NE2000/NE1000 support"
+	depends on NET_ISA || (Q40 && m) || M32R
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.  Many Ethernet cards
+	  without a specific driver are compatible with NE2000.
+
+	  If you have a PCI NE2000 card however, say N here and Y to "PCI
+	  NE2000 and clone support" under "EISA, VLB, PCI and on board
+	  controllers" below. If you have a NE2000 card and are running on
+	  an MCA system (a bus system used on some IBM PS/2 computers and
+	  laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
+	  below.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called ne.
+
+config ZNET
+	tristate "Zenith Z-Note support (EXPERIMENTAL)"
+	depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
+	help
+	  The Zenith Z-Note notebook computer has a built-in network
+	  (Ethernet) card, and this is the Linux driver for it. Note that the
+	  IBM Thinkpad 300 is compatible with the Z-Note and is also supported
+	  by this driver. Read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+config SEEQ8005
+	tristate "SEEQ8005 support (EXPERIMENTAL)"
+	depends on NET_ISA && EXPERIMENTAL
+	help
+	  This is a driver for the SEEQ 8005 network (Ethernet) card.  If this
+	  is for you, read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called seeq8005.
+
+config NE2_MCA
+	tristate "NE/2 (ne2000 MCA version) support"
+	depends on NET_ETHERNET && MCA_LEGACY
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called ne2.
+
+config IBMLANA
+	tristate "IBM LAN Adapter/A support"
+	depends on NET_ETHERNET && MCA && MCA_LEGACY
+	---help---
+	  This is a Micro Channel Ethernet adapter.  You need to set
+	  CONFIG_MCA to use this driver.  It is both available as an in-kernel
+	  driver and as a module.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The only
+	  currently supported card is the IBM LAN Adapter/A for Ethernet.  It
+	  will both support 16K and 32K memory windows, however a 32K window
+	  gives a better security against packet losses.  Usage of multiple
+	  boards with this driver should be possible, but has not been tested
+	  up to now due to lack of hardware.
+
+config IBMVETH
+	tristate "IBM LAN Virtual Ethernet support"
+	depends on NET_ETHERNET && PPC_PSERIES
+	---help---
+	  This driver supports virtual ethernet adapters on newer IBM iSeries
+	  and pSeries systems.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module will
+	  be called ibmveth.
+
+config IBM_EMAC
+	tristate "PowerPC 4xx on-chip Ethernet support"
+	depends on 4xx
+	help
+	  This driver supports the PowerPC 4xx EMAC family of on-chip
+          Ethernet controllers.
+
+config IBM_EMAC_RXB
+	int "Number of receive buffers"
+	depends on IBM_EMAC
+	default "128"
+
+config IBM_EMAC_TXB
+	int "Number of transmit buffers"
+	depends on IBM_EMAC
+	default "64"
+
+config IBM_EMAC_POLL_WEIGHT
+	int "MAL NAPI polling weight"
+	depends on IBM_EMAC
+	default "32"
+
+config IBM_EMAC_RX_COPY_THRESHOLD
+	int "RX skb copy threshold (bytes)"
+	depends on IBM_EMAC
+	default "256"
+
+config IBM_EMAC_RX_SKB_HEADROOM
+	int "Additional RX skb headroom (bytes)"
+	depends on IBM_EMAC
+	default "0"
+	help
+	  Additional receive skb headroom. Note, that driver
+	  will always reserve at least 2 bytes to make IP header
+	  aligned, so usually there is no need to add any additional
+	  headroom.
+	  
+	  If unsure, set to 0.
+
+config IBM_EMAC_PHY_RX_CLK_FIX
+	bool "PHY Rx clock workaround"
+	depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR)
+	help
+	  Enable this if EMAC attached to a PHY which doesn't generate
+	  RX clock if there is no link, if this is the case, you will 
+	  see "TX disable timeout" or "RX disable timeout" in the system
+	  log.
+	  
+	  If unsure, say N.
+
+config IBM_EMAC_DEBUG
+	bool "Debugging"
+	depends on IBM_EMAC
+	default n
+
+config IBM_EMAC_ZMII
+	bool
+	depends on IBM_EMAC && (NP405H || NP405L || 44x)
+	default y
+
+config IBM_EMAC_RGMII
+	bool
+	depends on IBM_EMAC && 440GX
+	default y
+		
+config IBM_EMAC_TAH
+	bool
+	depends on IBM_EMAC && 440GX
+	default y
+
+config NET_PCI
+	bool "EISA, VLB, PCI and on board controllers"
+	depends on NET_ETHERNET && (ISA || EISA || PCI)
+	help
+	  This is another class of network cards which attach directly to the
+	  bus. If you have one of those, say Y and read the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about this class of network cards. If you say Y, you
+	  will be asked for your specific card in the following questions. If
+	  you are unsure, say Y.
+
+config PCNET32
+	tristate "AMD PCnet32 PCI support"
+	depends on NET_PCI && PCI
+	select CRC32
+	select MII
+	help
+	  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
+	  answer Y here and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called pcnet32.
+
+config PCNET32_NAPI
+	bool "Use RX polling (NAPI)"
+	depends on PCNET32
+	help
+	  NAPI is a new driver API designed to reduce CPU and interrupt load
+	  when the driver is receiving lots of packets from the card. It is
+	  still somewhat experimental and thus not yet enabled by default.
+
+	  If your estimated Rx load is 10kpps or more, or if the card will be
+	  deployed on potentially unfriendly networks (e.g. in a firewall),
+	  then say Y here.
+
+	  See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+	  information.
+
+	  If in doubt, say N.
+
+config AMD8111_ETH
+	tristate "AMD 8111 (new PCI lance) support"
+	depends on NET_PCI && PCI
+	select CRC32
+	select MII
+	help
+	  If you have an AMD 8111-based PCI lance ethernet card,
+	  answer Y here and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called amd8111e.
+config AMD8111E_NAPI
+	bool "Enable NAPI support"
+	depends on AMD8111_ETH
+	help
+	  NAPI is a new driver API designed to reduce CPU and interrupt load
+	  when the driver is receiving lots of packets from the card. It is
+	  still somewhat experimental and thus not yet enabled by default.
+
+	  If your estimated Rx load is 10kpps or more, or if the card will be
+	  deployed on potentially unfriendly networks (e.g. in a firewall),
+	  then say Y here.
+
+	  See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+	  information.
+
+	  If in doubt, say N.
+
+config ADAPTEC_STARFIRE
+	tristate "Adaptec Starfire/DuraLAN support"
+	depends on NET_PCI && PCI
+	select CRC32
+	select MII
+	help
+	  Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
+	  adapter. The DuraLAN chip is used on the 64 bit PCI boards from
+	  Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
+	  driver.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called starfire.  This is recommended.
+
+config ADAPTEC_STARFIRE_NAPI
+	bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
+	depends on ADAPTEC_STARFIRE && EXPERIMENTAL
+	help
+	  NAPI is a new driver API designed to reduce CPU and interrupt load
+	  when the driver is receiving lots of packets from the card. It is
+	  still somewhat experimental and thus not yet enabled by default.
+
+	  If your estimated Rx load is 10kpps or more, or if the card will be
+	  deployed on potentially unfriendly networks (e.g. in a firewall),
+	  then say Y here.
+
+	  See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+	  information.
+
+	  If in doubt, say N.
+
+config AC3200
+	tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
+	depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called ac3200.
+
+config APRICOT
+	tristate "Apricot Xen-II on board Ethernet"
+	depends on NET_PCI && ISA
+	help
+	  If you have a network (Ethernet) controller of this type, say Y and
+	  read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module will be
+	  called apricot.
+
+config B44
+	tristate "Broadcom 4400 ethernet support"
+	depends on NET_PCI && PCI
+	select MII
+	help
+	  If you have a network (Ethernet) controller of this type, say Y and
+	  read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module will be
+	  called b44.
+
+config FORCEDETH
+	tristate "nForce Ethernet support"
+	depends on NET_PCI && PCI
+	help
+	  If you have a network (Ethernet) controller of this type, say Y and
+	  read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module will be
+	  called forcedeth.
+
+config FORCEDETH_NAPI
+	bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)"
+	depends on FORCEDETH && EXPERIMENTAL
+	help
+	  NAPI is a new driver API designed to reduce CPU and interrupt load
+	  when the driver is receiving lots of packets from the card. It is
+	  still somewhat experimental and thus not yet enabled by default.
+
+	  If your estimated Rx load is 10kpps or more, or if the card will be
+	  deployed on potentially unfriendly networks (e.g. in a firewall),
+	  then say Y here.
+
+	  See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+	  information.
+
+	  If in doubt, say N.
+
+config CS89x0
+	tristate "CS89x0 support"
+	depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X)
+	---help---
+	  Support for CS89x0 chipset based Ethernet cards. If you have a
+	  network (Ethernet) card of this type, say Y and read the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto> as well as
+	  <file:Documentation/networking/cs89x0.txt>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module will be
+	  called cs89x0.
+
+config TC35815
+	tristate "TOSHIBA TC35815 Ethernet support"
+	depends on NET_PCI && PCI && TOSHIBA_JMR3927
+
+config DGRS
+	tristate "Digi Intl. RightSwitch SE-X support"
+	depends on NET_PCI && (PCI || EISA)
+	---help---
+	  This is support for the Digi International RightSwitch series of
+	  PCI/EISA Ethernet switch cards. These include the SE-4 and the SE-6
+	  models.  If you have a network card of this type, say Y and read the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.  More specific
+	  information is contained in <file:Documentation/networking/dgrs.txt>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module
+	  will be called dgrs.
+
+config EEPRO100
+	tristate "EtherExpressPro/100 support (eepro100, original Becker driver)"
+	depends on NET_PCI && PCI
+	select MII
+	help
+	  If you have an Intel EtherExpress PRO/100 PCI network (Ethernet)
+	  card, say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module
+	  will be called eepro100.
+
+
+config E100
+	tristate "Intel(R) PRO/100+ support"
+	depends on NET_PCI && PCI
+	select MII
+	---help---
+	  This driver supports Intel(R) PRO/100 family of adapters.
+	  To verify that your adapter is supported, find the board ID number 
+	  on the adapter. Look for a label that has a barcode and a number 
+	  in the format 123456-001 (six digits hyphen three digits). 
+
+	  Use the above information and the Adapter & Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+          to identify the adapter.
+
+	  For the latest Intel PRO/100 network driver for Linux, see:
+
+	  <http://appsr.intel.com/scripts-df/support_intel.asp>
+
+	  More specific information on configuring the driver is in 
+	  <file:Documentation/networking/e100.txt>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module
+	  will be called e100.
+
+config LNE390
+	tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
+	depends on NET_PCI && EISA && EXPERIMENTAL
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module
+	  will be called lne390.
+
+config FEALNX
+	tristate "Myson MTD-8xx PCI Ethernet support"
+	depends on NET_PCI && PCI
+	select CRC32
+	select MII
+	help
+	  Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
+	  cards. Specifications and data at
+	  <http://www.myson.com.hk/mtd/datasheet/>.
+
+config NATSEMI
+	tristate "National Semiconductor DP8381x series PCI Ethernet support"
+	depends on NET_PCI && PCI
+	select CRC32
+	help
+	  This driver is for the National Semiconductor DP83810 series,
+	  which is used in cards from PureData, NetGear, Linksys
+	  and others, including the 83815 chip.
+	  More specific information and updates are available from
+	  <http://www.scyld.com/network/natsemi.html>.
+
+config NE2K_PCI
+	tristate "PCI NE2000 and clones support (see help)"
+	depends on NET_PCI && PCI
+	select CRC32
+	---help---
+	  This driver is for NE2000 compatible PCI cards. It will not work
+	  with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
+	  support" below). If you have a PCI NE2000 network (Ethernet) card,
+	  say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  This driver also works for the following NE2000 clone cards:
+	  RealTek RTL-8029  Winbond 89C940  Compex RL2000  KTI ET32P2
+	  NetVin NV5000SC   Via 86C926      SureCom NE34   Winbond
+	  Holtek HT80232    Holtek HT80229
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module
+	  will be called ne2k-pci.
+
+config NE3210
+	tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
+	depends on NET_PCI && EISA && EXPERIMENTAL
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.  Note that this driver
+	  will NOT WORK for NE3200 cards as they are completely different.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module
+	  will be called ne3210.
+
+config ES3210
+	tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
+	depends on NET_PCI && EISA && EXPERIMENTAL
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module
+	  will be called es3210.
+
+config 8139CP
+	tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
+	depends on NET_PCI && PCI && EXPERIMENTAL
+	select CRC32
+	select MII
+	help
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the RTL8139C+ chips. If you have one of those, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8139cp.  This is recommended.
+
+config 8139TOO
+	tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
+	depends on NET_PCI && PCI
+	select CRC32
+	select MII
+	---help---
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the RTL 8129/8130/8139 chips. If you have one of those, say Y and
+	  read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8139too.  This is recommended.
+
+config 8139TOO_PIO
+	bool "Use PIO instead of MMIO"
+	default y
+	depends on 8139TOO
+	help
+	  This instructs the driver to use programmed I/O ports (PIO) instead
+	  of PCI shared memory (MMIO).  This can possibly solve some problems
+	  in case your mainboard has memory consistency issues.  If unsure,
+	  say N.
+
+config 8139TOO_TUNE_TWISTER
+	bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
+	depends on 8139TOO
+	help
+	  This implements a function which might come in handy in case you
+	  are using low quality on long cabling. It is required for RealTek
+	  RTL-8139 revision K boards, and totally unused otherwise.  It tries
+	  to match the transceiver to the cable characteristics. This is
+	  experimental since hardly documented by the manufacturer.
+	  If unsure, say Y.
+
+config 8139TOO_8129
+	bool "Support for older RTL-8129/8130 boards"
+	depends on 8139TOO
+	help
+	  This enables support for the older and uncommon RTL-8129 and
+	  RTL-8130 chips, which support MII via an external transceiver,
+	  instead of an internal one.  Disabling this option will save some
+	  memory by making the code size smaller.  If unsure, say Y.
+
+config 8139_OLD_RX_RESET
+	bool "Use older RX-reset method"
+	depends on 8139TOO
+	help
+	  The 8139too driver was recently updated to contain a more rapid
+	  reset sequence, in the face of severe receive errors.  This "new"
+	  RX-reset method should be adequate for all boards.  But if you
+	  experience problems, you can enable this option to restore the
+	  old RX-reset behavior.  If unsure, say N.
+
+config SIS900
+	tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
+	depends on NET_PCI && PCI
+	select CRC32
+	select MII
+	---help---
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
+	  SiS 630 and SiS 540 chipsets.
+
+	  This driver also supports AMD 79C901 HomePNA so that you can use
+	  your phone line as a network cable.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sis900.  This is recommended.
+
+config EPIC100
+	tristate "SMC EtherPower II"
+	depends on NET_PCI && PCI
+	select CRC32
+	select MII
+	help
+	  This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
+	  which is based on the SMC83c17x (EPIC/100).
+	  More specific information and updates are available from
+	  <http://www.scyld.com/network/epic100.html>.
+
+config SUNDANCE
+	tristate "Sundance Alta support"
+	depends on NET_PCI && PCI
+	select CRC32
+	select MII
+	help
+	  This driver is for the Sundance "Alta" chip.
+	  More specific information and updates are available from
+	  <http://www.scyld.com/network/sundance.html>.
+
+config SUNDANCE_MMIO
+	bool "Use MMIO instead of PIO"
+	depends on SUNDANCE
+	help
+	  Enable memory-mapped I/O for interaction with Sundance NIC registers.
+	  Do NOT enable this by default, PIO (enabled when MMIO is disabled)
+	  is known to solve bugs on certain chips.
+
+	  If unsure, say N.
+
+config TLAN
+	tristate "TI ThunderLAN support"
+	depends on NET_PCI && (PCI || EISA) && !64BIT
+	---help---
+	  If you have a PCI Ethernet network card based on the ThunderLAN chip
+	  which is supported by this driver, say Y and read the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Devices currently supported by this driver are Compaq Netelligent,
+	  Compaq NetFlex and Olicom cards.  Please read the file
+	  <file:Documentation/networking/tlan.txt> for more details.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called tlan.
+
+	  Please email feedback to <torben.mathiasen@compaq.com>.
+
+config VIA_RHINE
+	tristate "VIA Rhine support"
+	depends on NET_PCI && PCI
+	select CRC32
+	select MII
+	help
+	  If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
+	  Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
+	  Ethernet functions can also be found integrated on South Bridges
+	  (e.g. VT8235).
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called via-rhine.
+
+config VIA_RHINE_MMIO
+	bool "Use MMIO instead of PIO"
+	depends on VIA_RHINE
+	help
+	  This instructs the driver to use PCI shared memory (MMIO) instead of
+	  programmed I/O ports (PIO). Enabling this gives an improvement in
+	  processing time in parts of the driver.
+
+	  If unsure, say Y.
+
+config VIA_RHINE_NAPI
+	bool "Use Rx Polling (NAPI)"
+	depends on VIA_RHINE
+	help
+	  NAPI is a new driver API designed to reduce CPU and interrupt load
+	  when the driver is receiving lots of packets from the card.
+
+	  If your estimated Rx load is 10kpps or more, or if the card will be
+	  deployed on potentially unfriendly networks (e.g. in a firewall),
+	  then say Y here.
+
+	  See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+	  information.
+
+config LAN_SAA9730
+	bool "Philips SAA9730 Ethernet support"
+	depends on NET_PCI && PCI && MIPS_ATLAS
+	help
+	  The SAA9730 is a combined multimedia and peripheral controller used
+	  in thin clients, Internet access terminals, and diskless
+	  workstations.
+	  See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>.
+
+config SC92031
+	tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
+	depends on NET_PCI && PCI && EXPERIMENTAL
+	select CRC32
+	---help---
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
+	  have one of these, say Y here.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sc92031.  This is recommended.
+
+config NET_POCKET
+	bool "Pocket and portable adapters"
+	depends on NET_ETHERNET && PARPORT
+	---help---
+	  Cute little network (Ethernet) devices which attach to the parallel
+	  port ("pocket adapters"), commonly used with laptops. If you have
+	  one of those, say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  If you want to plug a network (or some other) card into the PCMCIA
+	  (or PC-card) slot of your laptop instead (PCMCIA is the standard for
+	  credit card size extension cards used by all modern laptops), you
+	  need the pcmcia-cs package (location contained in the file
+	  <file:Documentation/Changes>) and you can say N here.
+
+	  Laptop users should read the Linux Laptop home page at
+	  <http://www.linux-on-laptops.com/> or
+	  Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about this class of network devices. If you say Y, you
+	  will be asked for your specific device in the following questions.
+
+config ATP
+	tristate "AT-LAN-TEC/RealTek pocket adapter support"
+	depends on NET_POCKET && PARPORT && X86
+	select CRC32
+	---help---
+	  This is a network (Ethernet) device which attaches to your parallel
+	  port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>, if you
+	  want to use this.  If you intend to use this driver, you should have
+	  said N to the "Parallel printer support", because the two drivers
+	  don't like each other.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called atp.
+
+config DE600
+	tristate "D-Link DE600 pocket adapter support"
+	depends on NET_POCKET && PARPORT
+	---help---
+	  This is a network (Ethernet) device which attaches to your parallel
+	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, if you want to use
+	  this. It is possible to have several devices share a single parallel
+	  port and it is safe to compile the corresponding drivers into the
+	  kernel.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called de600.
+
+config DE620
+	tristate "D-Link DE620 pocket adapter support"
+	depends on NET_POCKET && PARPORT
+	---help---
+	  This is a network (Ethernet) device which attaches to your parallel
+	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, if you want to use
+	  this. It is possible to have several devices share a single parallel
+	  port and it is safe to compile the corresponding drivers into the
+	  kernel.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called de620.
+
+config SGISEEQ
+	tristate "SGI Seeq ethernet controller support"
+	depends on NET_ETHERNET && SGI_IP22
+	help
+	  Say Y here if you have an Seeq based Ethernet network card. This is
+	  used in many Silicon Graphics machines.
+
+config DECLANCE
+	tristate "DEC LANCE ethernet controller support"
+	depends on NET_ETHERNET && MACH_DECSTATION
+	select CRC32
+	help
+	  This driver is for the series of Ethernet controllers produced by
+	  DEC (now Compaq) based on the AMD Lance chipset, including the
+	  DEPCA series.  (This chipset is better known via the NE2100 cards.)
+
+config 68360_ENET
+	bool "Motorola 68360 ethernet controller"
+	depends on M68360
+	help
+	  Say Y here if you want to use the built-in ethernet controller of
+	  the Motorola 68360 processor.
+
+config FEC
+	bool "FEC ethernet controller (of ColdFire CPUs)"
+	depends on M523x || M527x || M5272 || M528x || M520x
+	help
+	  Say Y here if you want to use the built-in 10/100 Fast ethernet
+	  controller on some Motorola ColdFire processors.
+
+config FEC2
+	bool "Second FEC ethernet controller (on some ColdFire CPUs)"
+	depends on FEC
+	help
+	  Say Y here if you want to use the second built-in 10/100 Fast
+	  ethernet controller on some Motorola ColdFire processors.
+
+config NE_H8300
+	tristate "NE2000 compatible support for H8/300"
+	depends on H8300 && NET_ETHERNET
+	help
+	  Say Y here if you want to use the NE2000 compatible
+	  controller on the Renesas H8/300 processor.
+
+source "drivers/net/fec_8xx/Kconfig"
+source "drivers/net/fs_enet/Kconfig"
+
+endmenu
+
+#
+#	Gigabit Ethernet
+#
+
+menu "Ethernet (1000 Mbit)"
+	depends on !UML
+
+config ACENIC
+	tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
+	depends on PCI
+	---help---
+	  Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
+	  GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
+	  adapter. The driver allows for using the Jumbo Frame option (9000
+	  bytes/frame) however it requires that your switches can handle this
+	  as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
+	  line.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called acenic.
+
+config ACENIC_OMIT_TIGON_I
+	bool "Omit support for old Tigon I based AceNICs"
+	depends on ACENIC
+	help
+	  Say Y here if you only have Tigon II based AceNICs and want to leave
+	  out support for the older Tigon I based cards which are no longer
+	  being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
+	  version)).  This will reduce the size of the driver object by
+	  app. 100KB.  If you are not sure whether your card is a Tigon I or a
+	  Tigon II, say N here.
+
+	  The safe and default value for this is N.
+
+config DL2K
+	tristate "D-Link DL2000-based Gigabit Ethernet support"
+	depends on PCI
+	select CRC32
+	help
+	  This driver supports D-Link 2000-based gigabit ethernet cards, which
+	  includes
+	  D-Link DGE-550T Gigabit Ethernet Adapter.
+	  D-Link DL2000-based Gigabit Ethernet Adapter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dl2k.
+
+config E1000
+	tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
+	depends on PCI
+	---help---
+	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
+	  adapters.  For more information on how to identify your adapter, go 
+	  to the Adapter & Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+	  For general information and support, go to the Intel support
+	  website at:
+
+	  <http://support.intel.com>
+
+	  More specific information on configuring the driver is in 
+	  <file:Documentation/networking/e1000.txt>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module
+	  will be called e1000.
+
+config E1000_NAPI
+	bool "Use Rx Polling (NAPI)"
+	depends on E1000
+	help
+	  NAPI is a new driver API designed to reduce CPU and interrupt load
+	  when the driver is receiving lots of packets from the card. It is
+	  still somewhat experimental and thus not yet enabled by default.
+
+	  If your estimated Rx load is 10kpps or more, or if the card will be
+	  deployed on potentially unfriendly networks (e.g. in a firewall),
+	  then say Y here.
+
+	  See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+	  information.
+
+	  If in doubt, say N.
+
+config E1000_DISABLE_PACKET_SPLIT
+	bool "Disable Packet Split for PCI express adapters"
+	depends on E1000
+	help
+	  Say Y here if you want to use the legacy receive path for PCI express
+	  hardware.
+
+	  If in doubt, say N.
+
+source "drivers/net/ixp2000/Kconfig"
+
+config MYRI_SBUS
+	tristate "MyriCOM Gigabit Ethernet support"
+	depends on SBUS
+	help
+	  This driver supports MyriCOM Sbus gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called myri_sbus.  This is recommended.
+
+config NS83820
+	tristate "National Semiconductor DP83820 support"
+	depends on PCI
+	help
+	  This is a driver for the National Semiconductor DP83820 series
+	  of gigabit ethernet MACs.  Cards using this chipset include
+	  the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
+	  SOHO-GA2000T, SOHO-GA2500T.  The driver supports the use of
+	  zero copy.
+
+config HAMACHI
+	tristate "Packet Engines Hamachi GNIC-II support"
+	depends on PCI
+	select MII
+	help
+	  If you have a Gigabit Ethernet card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module will be
+	  called hamachi.
+
+config YELLOWFIN
+	tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	---help---
+	  Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
+	  adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
+	  used by the Beowulf Linux cluster project.  See
+	  <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
+	  information about this driver in particular and Beowulf in general.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called yellowfin.  This is recommended.
+
+config R8169
+	tristate "Realtek 8169 gigabit ethernet support"
+	depends on PCI
+	select CRC32
+	---help---
+	  Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called r8169.  This is recommended.
+
+config R8169_NAPI
+	bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)"
+	depends on R8169 && EXPERIMENTAL
+	help
+	  NAPI is a new driver API designed to reduce CPU and interrupt load
+	  when the driver is receiving lots of packets from the card. It is
+	  still somewhat experimental and thus not yet enabled by default.
+
+	  If your estimated Rx load is 10kpps or more, or if the card will be
+	  deployed on potentially unfriendly networks (e.g. in a firewall),
+	  then say Y here.
+
+	  See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+	  information.
+
+	  If in doubt, say N.
+
+config R8169_VLAN
+	bool "VLAN support"
+	depends on R8169 && VLAN_8021Q
+	---help---
+	  Say Y here for the r8169 driver to support the functions required
+	  by the kernel 802.1Q code.
+	  
+	  If in doubt, say Y.
+
+config SIS190
+	tristate "SiS190/SiS191 gigabit ethernet support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
+	  a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
+	  appear in lan on motherboard designs which are based on SiS 965
+	  and SiS 966 south bridge.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sis190.  This is recommended.
+
+config SKGE
+	tristate "New SysKonnect GigaEthernet support"
+	depends on PCI
+	select CRC32
+	---help---
+	  This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
+	  and related Gigabit Ethernet adapters. It is a new smaller driver
+	  with better performance and more complete ethtool support.
+
+	  It does not support the link failover and network management 
+	  features that "portable" vendor supplied sk98lin driver does.
+
+	  This driver supports adapters based on the original Yukon chipset:
+	  Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
+	  Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
+
+	  It does not support the newer Yukon2 chipset: a separate driver,
+	  sky2, is provided for Yukon2-based adapters.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called skge.  This is recommended.
+
+config SKY2
+	tristate "SysKonnect Yukon2 support (EXPERIMENTAL)"
+	depends on PCI
+	select CRC32
+	---help---
+	  This driver supports Gigabit Ethernet adapters based on the
+	  Marvell Yukon 2 chipset:
+	  Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
+	  88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
+
+	  There is companion driver for the older Marvell Yukon and
+	  Genesis based adapters: skge.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sky2.  This is recommended.
+
+config SK98LIN
+	tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)"
+	depends on PCI
+	---help---
+	  Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx
+	  compliant Gigabit Ethernet Adapter.
+
+	  This driver supports the original Yukon chipset. This driver is
+	  deprecated and will be removed from the kernel in the near future,
+	  it has been replaced by the skge driver. skge is cleaner and
+	  seems to work better.
+
+	  This driver does not support the newer Yukon2 chipset. A separate
+	  driver, sky2, is provided to support Yukon2-based adapters.
+
+	  The following adapters are supported by this driver:
+	    - 3Com 3C940 Gigabit LOM Ethernet Adapter
+	    - 3Com 3C941 Gigabit LOM Ethernet Adapter
+	    - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter
+	    - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter
+	    - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter
+	    - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter
+	    - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter
+	    - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter
+	    - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter
+	    - Allied Telesyn AT-2971T Gigabit Ethernet Adapter
+	    - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45
+	    - EG1032 v2 Instant Gigabit Network Adapter
+	    - EG1064 v2 Instant Gigabit Network Adapter
+	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit)
+	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron)
+	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus)
+	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS)
+	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox)
+	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn)
+	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte)
+	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill)
+	    - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel)
+	    - Marvell RDK-8001 Adapter
+	    - Marvell RDK-8002 Adapter
+	    - Marvell RDK-8003 Adapter
+	    - Marvell RDK-8004 Adapter
+	    - Marvell RDK-8006 Adapter
+	    - Marvell RDK-8007 Adapter
+	    - Marvell RDK-8008 Adapter
+	    - Marvell RDK-8009 Adapter
+	    - Marvell RDK-8010 Adapter
+	    - Marvell RDK-8011 Adapter
+	    - Marvell RDK-8012 Adapter
+	    - Marvell RDK-8052 Adapter
+	    - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit)
+	    - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit)
+	    - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L)
+	    - SK-9521 10/100/1000Base-T Adapter
+	    - SK-9521 V2.0 10/100/1000Base-T Adapter
+	    - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T)
+	    - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter
+	    - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link)
+	    - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX)
+	    - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter
+	    - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link)
+	    - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX)
+	    - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter
+	    - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link)
+	    - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter
+	    - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition)
+	    - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter
+	    - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link)
+	    - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX)
+	    - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter
+	    - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link)
+	    - SMC EZ Card 1000 (SMC9452TXV.2)
+	  
+	  The adapters support Jumbo Frames.
+	  The dual link adapters support link-failover and dual port features.
+	  Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support 
+	  the scatter-gather functionality with sendfile(). Please refer to 
+	  <file:Documentation/networking/sk98lin.txt> for more information about
+	  optional driver parameters.
+	  Questions concerning this driver may be addressed to:
+	      <linux@syskonnect.de>
+	  
+	  If you want to compile this driver as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/kbuild/modules.txt>. The module will
+	  be called sk98lin. This is recommended.
+
+config VIA_VELOCITY
+	tristate "VIA Velocity support"
+	depends on NET_PCI && PCI
+	select CRC32
+	select CRC_CCITT
+	select MII
+	help
+	  If you have a VIA "Velocity" based network card say Y here.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called via-velocity.
+
+config TIGON3
+	tristate "Broadcom Tigon3 support"
+	depends on PCI
+	help
+	  This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called tg3.  This is recommended.
+
+config BNX2
+	tristate "Broadcom NetXtremeII support"
+	depends on PCI
+	select CRC32
+	select ZLIB_INFLATE
+	help
+	  This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called bnx2.  This is recommended.
+
+config SPIDER_NET
+	tristate "Spider Gigabit Ethernet driver"
+	depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
+	select FW_LOADER
+	help
+	  This driver supports the Gigabit Ethernet chips present on the
+	  Cell Processor-Based Blades from IBM.
+
+config TSI108_ETH
+	   tristate "Tundra TSI108 gigabit Ethernet support"
+	   depends on TSI108_BRIDGE
+	   help
+	     This driver supports Tundra TSI108 gigabit Ethernet ports.
+	     To compile this driver as a module, choose M here: the module
+	     will be called tsi108_eth.
+
+config GIANFAR
+	tristate "Gianfar Ethernet"
+	depends on 85xx || 83xx || PPC_86xx
+	select PHYLIB
+	select CRC32
+	help
+	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
+	  and MPC86xx family of chips, and the FEC on the 8540.
+
+config GFAR_NAPI
+	bool "NAPI Support"
+	depends on GIANFAR
+
+config UCC_GETH
+	tristate "Freescale QE UCC GETH"
+	depends on QUICC_ENGINE && UCC_FAST
+	help
+	  This driver supports the Gigabit Ethernet mode of QE UCC.
+	  QE can be found on MPC836x CPUs.
+
+config UGETH_NAPI
+	bool "NAPI Support"
+	depends on UCC_GETH
+
+config UGETH_MAGIC_PACKET
+	bool "Magic Packet detection support"
+	depends on UCC_GETH
+
+config UGETH_FILTERING
+	bool "Mac address filtering support"
+	depends on UCC_GETH
+
+config UGETH_TX_ON_DEMOND
+	bool "Transmit on Demond support"
+	depends on UCC_GETH
+
+config UGETH_HAS_GIGA
+	bool
+	depends on UCC_GETH && PPC_MPC836x
+
+config MV643XX_ETH
+	tristate "MV-643XX Ethernet support"
+	depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32)
+	select MII
+	help
+	  This driver supports the gigabit Ethernet on the Marvell MV643XX
+	  chipset which is used in the Momenco Ocelot C and Jaguar ATX and
+	  Pegasos II, amongst other PPC and MIPS boards.
+
+config QLA3XXX
+	tristate "QLogic QLA3XXX Network Driver Support"
+	depends on PCI
+	help
+	  This driver supports QLogic ISP3XXX gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called qla3xxx.
+
+config ATL1
+	tristate "Attansic L1 Gigabit Ethernet support (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	select MII
+	help
+	  This driver supports the Attansic L1 gigabit ethernet adapter.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called atl1.
+
+endmenu
+
+#
+#	10 Gigabit Ethernet
+#
+
+menu "Ethernet (10000 Mbit)"
+	depends on !UML
+
+config CHELSIO_T1
+        tristate "Chelsio 10Gb Ethernet support"
+        depends on PCI
+	select CRC32
+        help
+          This driver supports Chelsio gigabit and 10-gigabit
+          Ethernet cards. More information about adapter features and
+	  performance tuning is in <file:Documentation/networking/cxgb.txt>.
+
+          For general information about Chelsio and our products, visit
+          our website at <http://www.chelsio.com>.
+
+          For customer support, please visit our customer support page at
+          <http://www.chelsio.com/support.htm>.
+
+          Please send feedback to <linux-bugs@chelsio.com>.
+
+          To compile this driver as a module, choose M here: the module
+          will be called cxgb.
+
+config CHELSIO_T1_1G
+        bool "Chelsio gigabit Ethernet support"
+        depends on CHELSIO_T1
+        help
+          Enables support for Chelsio's gigabit Ethernet PCI cards.  If you
+          are using only 10G cards say 'N' here.
+
+config CHELSIO_T1_NAPI
+	bool "Use Rx Polling (NAPI)"
+	depends on CHELSIO_T1
+	default y
+	help
+	  NAPI is a driver API designed to reduce CPU and interrupt load
+	  when the driver is receiving lots of packets from the card.
+
+config CHELSIO_T3
+	tristate "Chelsio Communications T3 10Gb Ethernet support"
+	depends on PCI
+	select FW_LOADER
+	help
+	  This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
+	  adapters.
+
+	  For general information about Chelsio and our products, visit
+	  our website at <http://www.chelsio.com>.
+
+	  For customer support, please visit our customer support page at
+	  <http://www.chelsio.com/support.htm>.
+
+	  Please send feedback to <linux-bugs@chelsio.com>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cxgb3.
+
+config EHEA
+	tristate "eHEA Ethernet support"
+	depends on IBMEBUS
+	---help---
+	  This driver supports the IBM pSeries eHEA ethernet adapter.
+
+	  To compile the driver as a module, choose M here. The module
+	  will be called ehea.
+
+config IXGB
+	tristate "Intel(R) PRO/10GbE support"
+	depends on PCI
+	---help---
+	  This driver supports Intel(R) PRO/10GbE family of
+	  adapters.  For more information on how to identify your adapter, go
+	  to the Adapter & Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+	  For general information and support, go to the Intel support
+	  website at:
+
+	  <http://support.intel.com>
+
+	  More specific information on configuring the driver is in 
+	  <file:Documentation/networking/ixgb.txt>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module
+	  will be called ixgb.
+
+config IXGB_NAPI
+	bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
+	depends on IXGB && EXPERIMENTAL
+	help
+	  NAPI is a new driver API designed to reduce CPU and interrupt load
+	  when the driver is receiving lots of packets from the card. It is
+	  still somewhat experimental and thus not yet enabled by default.
+
+	  If your estimated Rx load is 10kpps or more, or if the card will be
+	  deployed on potentially unfriendly networks (e.g. in a firewall),
+	  then say Y here.
+
+	  See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+	  information.
+
+	  If in doubt, say N.
+
+config S2IO
+	tristate "S2IO 10Gbe XFrame NIC"
+	depends on PCI
+	---help---
+	  This driver supports the 10Gbe XFrame NIC of S2IO. 
+	  More specific information on configuring the driver is in 
+	  <file:Documentation/networking/s2io.txt>.
+
+config S2IO_NAPI
+	bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
+	depends on S2IO && EXPERIMENTAL
+	help
+	  NAPI is a new driver API designed to reduce CPU and interrupt load
+	  when the driver is receiving lots of packets from the card. It is
+	  still somewhat experimental and thus not yet enabled by default.
+
+	  If your estimated Rx load is 10kpps or more, or if the card will be
+	  deployed on potentially unfriendly networks (e.g. in a firewall),
+	  then say Y here.
+
+	  See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+	  information.
+
+	  If in doubt, say N.
+
+config MYRI10GE
+	tristate "Myricom Myri-10G Ethernet support"
+	depends on PCI
+	select FW_LOADER
+	select CRC32
+	---help---
+	  This driver supports Myricom Myri-10G Dual Protocol interface in
+	  Ethernet mode. If the eeprom on your board is not recent enough,
+	  you will need a newer firmware image.
+	  You may get this image or more information, at:
+
+	  <http://www.myri.com/scs/download-Myri10GE.html>
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module
+	  will be called myri10ge.
+
+config NETXEN_NIC
+	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
+	depends on PCI
+	help
+	  This enables the support for NetXen's Gigabit Ethernet card.
+
+config PASEMI_MAC
+	tristate "PA Semi 1/10Gbit MAC"
+	depends on PPC64 && PCI
+	help
+	  This driver supports the on-chip 1/10Gbit Ethernet controller on
+	  PA Semi's PWRficient line of chips.
+
+endmenu
+
+source "drivers/net/tokenring/Kconfig"
+
+source "drivers/net/wireless/Kconfig"
+
+source "drivers/net/pcmcia/Kconfig"
+
+source "drivers/net/wan/Kconfig"
+
+source "drivers/atm/Kconfig"
+
+source "drivers/s390/net/Kconfig"
+
+config ISERIES_VETH
+	tristate "iSeries Virtual Ethernet driver support"
+	depends on PPC_ISERIES
+
+config RIONET
+	tristate "RapidIO Ethernet over messaging driver support"
+	depends on RAPIDIO
+
+config RIONET_TX_SIZE
+	int "Number of outbound queue entries"
+	depends on RIONET
+	default "128"
+
+config RIONET_RX_SIZE
+	int "Number of inbound queue entries"
+	depends on RIONET
+	default "128"
+
+config FDDI
+	bool "FDDI driver support"
+	depends on (PCI || EISA || TC)
+	help
+	  Fiber Distributed Data Interface is a high speed local area network
+	  design; essentially a replacement for high speed Ethernet. FDDI can
+	  run over copper or fiber. If you are connected to such a network and
+	  want a driver for the FDDI card in your computer, say Y here (and
+	  then also Y to the driver for your FDDI card, below). Most people
+	  will say N.
+
+config DEFXX
+	tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
+	depends on FDDI && (PCI || EISA || TC)
+	---help---
+	  This is support for the DIGITAL series of TURBOchannel (DEFTA),
+	  EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
+	  to a local FDDI network.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called defxx.  If unsure, say N.
+
+config DEFXX_MMIO
+	bool
+	prompt "Use MMIO instead of PIO" if PCI || EISA
+	depends on DEFXX
+	default n if PCI || EISA
+	default y
+	---help---
+	  This instructs the driver to use EISA or PCI memory-mapped I/O
+	  (MMIO) as appropriate instead of programmed I/O ports (PIO).
+	  Enabling this gives an improvement in processing time in parts
+	  of the driver, but it may cause problems with EISA (DEFEA)
+	  adapters.  TURBOchannel does not have the concept of I/O ports,
+	  so MMIO is always used for these (DEFTA) adapters.
+
+	  If unsure, say N.
+
+config SKFP
+	tristate "SysKonnect FDDI PCI support"
+	depends on FDDI && PCI
+	select BITREVERSE
+	---help---
+	  Say Y here if you have a SysKonnect FDDI PCI adapter.
+	  The following adapters are supported by this driver:
+	  - SK-5521 (SK-NET FDDI-UP)
+	  - SK-5522 (SK-NET FDDI-UP DAS)
+	  - SK-5541 (SK-NET FDDI-FP)
+	  - SK-5543 (SK-NET FDDI-LP)
+	  - SK-5544 (SK-NET FDDI-LP DAS)
+	  - SK-5821 (SK-NET FDDI-UP64)
+	  - SK-5822 (SK-NET FDDI-UP64 DAS)
+	  - SK-5841 (SK-NET FDDI-FP64)
+	  - SK-5843 (SK-NET FDDI-LP64)
+	  - SK-5844 (SK-NET FDDI-LP64 DAS)
+	  - Netelligent 100 FDDI DAS Fibre SC
+	  - Netelligent 100 FDDI SAS Fibre SC
+	  - Netelligent 100 FDDI DAS UTP
+	  - Netelligent 100 FDDI SAS UTP
+	  - Netelligent 100 FDDI SAS Fibre MIC
+
+	  Read <file:Documentation/networking/skfp.txt> for information about
+	  the driver.
+
+	  Questions concerning this driver can be addressed to:
+	  <linux@syskonnect.de>
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called skfp.  This is recommended.
+
+config HIPPI
+	bool "HIPPI driver support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && INET && PCI
+	help
+	  HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
+	  1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
+	  can run over copper (25m) or fiber (300m on multi-mode or 10km on
+	  single-mode). HIPPI networks are commonly used for clusters and to
+	  connect to super computers. If you are connected to a HIPPI network
+	  and have a HIPPI network card in your computer that you want to use
+	  under Linux, say Y here (you must also remember to enable the driver
+	  for your HIPPI card below). Most people will say N here.
+
+config ROADRUNNER
+	tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
+	depends on HIPPI && PCI
+	help
+	  Say Y here if this is your PCI HIPPI network card.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called rrunner.  If unsure, say N.
+
+config ROADRUNNER_LARGE_RINGS
+	bool "Use large TX/RX rings (EXPERIMENTAL)"
+	depends on ROADRUNNER
+	help
+	  If you say Y here, the RoadRunner driver will preallocate up to 2 MB
+	  of additional memory to allow for fastest operation, both for
+	  transmitting and receiving. This memory cannot be used by any other
+	  kernel code or by user space programs. Say Y here only if you have
+	  the memory.
+
+config PLIP
+	tristate "PLIP (parallel port) support"
+	depends on PARPORT
+	---help---
+	  PLIP (Parallel Line Internet Protocol) is used to create a
+	  reasonably fast mini network consisting of two (or, rarely, more)
+	  local machines.  A PLIP link from a Linux box is a popular means to
+	  install a Linux distribution on a machine which doesn't have a
+	  CD-ROM drive (a minimal system has to be transferred with floppies
+	  first). The kernels on both machines need to have this PLIP option
+	  enabled for this to work.
+
+	  The PLIP driver has two modes, mode 0 and mode 1.  The parallel
+	  ports (the connectors at the computers with 25 holes) are connected
+	  with "null printer" or "Turbo Laplink" cables which can transmit 4
+	  bits at a time (mode 0) or with special PLIP cables, to be used on
+	  bidirectional parallel ports only, which can transmit 8 bits at a
+	  time (mode 1); you can find the wiring of these cables in
+	  <file:Documentation/networking/PLIP.txt>.  The cables can be up to
+	  15m long.  Mode 0 works also if one of the machines runs DOS/Windows
+	  and has some PLIP software installed, e.g. the Crynwr PLIP packet
+	  driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
+	  and winsock or NCSA's telnet.
+
+	  If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
+	  as the NET-3-HOWTO, both available from
+	  <http://www.tldp.org/docs.html#howto>.  Note that the PLIP
+	  protocol has been changed and this PLIP driver won't work together
+	  with the PLIP support in Linux versions 1.0.x.  This option enlarges
+	  your kernel by about 8 KB.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module will be
+	  called plip.  If unsure, say Y or M, in case you buy a laptop
+	  later.
+
+config PPP
+	tristate "PPP (point-to-point protocol) support"
+	select SLHC
+	---help---
+	  PPP (Point to Point Protocol) is a newer and better SLIP.  It serves
+	  the same purpose: sending Internet traffic over telephone (and other
+	  serial) lines.  Ask your access provider if they support it, because
+	  otherwise you can't use it; most Internet access providers these
+	  days support PPP rather than SLIP.
+
+	  To use PPP, you need an additional program called pppd as described
+	  in the PPP-HOWTO, available at
+	  <http://www.tldp.org/docs.html#howto>.  Make sure that you have
+	  the version of pppd recommended in <file:Documentation/Changes>.
+	  The PPP option enlarges your kernel by about 16 KB.
+
+	  There are actually two versions of PPP: the traditional PPP for
+	  asynchronous lines, such as regular analog phone lines, and
+	  synchronous PPP which can be used over digital ISDN lines for
+	  example.  If you want to use PPP over phone lines or other
+	  asynchronous serial lines, you need to say Y (or M) here and also to
+	  the next option, "PPP support for async serial ports".  For PPP over
+	  synchronous lines, you should say Y (or M) here and to "Support
+	  synchronous PPP", below.
+
+	  If you said Y to "Version information on all symbols" above, then
+	  you cannot compile the PPP driver into the kernel; you can then only
+	  compile it as a module. To compile this driver as a module, choose M
+	  here and read <file:Documentation/networking/net-modules.txt>.
+	  The module will be called ppp_generic.
+
+config PPP_MULTILINK
+	bool "PPP multilink support (EXPERIMENTAL)"
+	depends on PPP && EXPERIMENTAL
+	help
+	  PPP multilink is a protocol (defined in RFC 1990) which allows you
+	  to combine several (logical or physical) lines into one logical PPP
+	  connection, so that you can utilize your full bandwidth.
+
+	  This has to be supported at the other end as well and you need a
+	  version of the pppd daemon which understands the multilink protocol.
+
+	  If unsure, say N.
+
+config PPP_FILTER
+	bool "PPP filtering"
+	depends on PPP
+	help
+	  Say Y here if you want to be able to filter the packets passing over
+	  PPP interfaces.  This allows you to control which packets count as
+	  activity (i.e. which packets will reset the idle timer or bring up
+	  a demand-dialed link) and which packets are to be dropped entirely.
+	  You need to say Y here if you wish to use the pass-filter and
+	  active-filter options to pppd.
+
+	  If unsure, say N.
+
+config PPP_ASYNC
+	tristate "PPP support for async serial ports"
+	depends on PPP
+	select CRC_CCITT
+	---help---
+	  Say Y (or M) here if you want to be able to use PPP over standard
+	  asynchronous serial ports, such as COM1 or COM2 on a PC.  If you use
+	  a modem (not a synchronous or ISDN modem) to contact your ISP, you
+	  need this option.
+
+	  To compile this driver as a module, choose M here.
+
+	  If unsure, say Y.
+
+config PPP_SYNC_TTY
+	tristate "PPP support for sync tty ports"
+	depends on PPP
+	help
+	  Say Y (or M) here if you want to be able to use PPP over synchronous
+	  (HDLC) tty devices, such as the SyncLink adapter. These devices
+	  are often used for high-speed leased lines like T1/E1.
+
+	  To compile this driver as a module, choose M here.
+
+config PPP_DEFLATE
+	tristate "PPP Deflate compression"
+	depends on PPP
+	select ZLIB_INFLATE
+	select ZLIB_DEFLATE
+	---help---
+	  Support for the Deflate compression method for PPP, which uses the
+	  Deflate algorithm (the same algorithm that gzip uses) to compress
+	  each PPP packet before it is sent over the wire.  The machine at the
+	  other end of the PPP link (usually your ISP) has to support the
+	  Deflate compression method as well for this to be useful.  Even if
+	  they don't support it, it is safe to say Y here.
+
+	  To compile this driver as a module, choose M here.
+
+config PPP_BSDCOMP
+	tristate "PPP BSD-Compress compression"
+	depends on PPP
+	---help---
+	  Support for the BSD-Compress compression method for PPP, which uses
+	  the LZW compression method to compress each PPP packet before it is
+	  sent over the wire. The machine at the other end of the PPP link
+	  (usually your ISP) has to support the BSD-Compress compression
+	  method as well for this to be useful. Even if they don't support it,
+	  it is safe to say Y here.
+
+	  The PPP Deflate compression method ("PPP Deflate compression",
+	  above) is preferable to BSD-Compress, because it compresses better
+	  and is patent-free.
+
+	  Note that the BSD compression code will always be compiled as a
+	  module; it is called bsd_comp and will show up in the directory
+	  modules once you have said "make modules". If unsure, say N.
+
+config PPP_MPPE
+       tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
+       depends on PPP && EXPERIMENTAL
+       select CRYPTO
+       select CRYPTO_SHA1
+       select CRYPTO_ARC4
+       select CRYPTO_ECB
+       ---help---
+         Support for the MPPE Encryption protocol, as employed by the
+	 Microsoft Point-to-Point Tunneling Protocol.
+
+	 See http://pptpclient.sourceforge.net/ for information on
+	 configuring PPTP clients and servers to utilize this method.
+
+config PPPOE
+	tristate "PPP over Ethernet (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && PPP
+	help
+	  Support for PPP over Ethernet.
+
+	  This driver requires the latest version of pppd from the CVS
+	  repository at cvs.samba.org.  Alternatively, see the 
+	  RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
+	  which contains instruction on how to use this driver (under 
+	  the heading "Kernel mode PPPoE").
+
+config PPPOATM
+	tristate "PPP over ATM"
+	depends on ATM && PPP
+	help
+	  Support PPP (Point to Point Protocol) encapsulated in ATM frames.
+	  This implementation does not yet comply with section 8 of RFC2364,
+	  which can lead to bad results if the ATM peer loses state and
+	  changes its encapsulation unilaterally.
+
+config SLIP
+	tristate "SLIP (serial line) support"
+	---help---
+	  Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
+	  connect to your Internet service provider or to connect to some
+	  other local Unix box or if you want to configure your Linux box as a
+	  Slip/CSlip server for other people to dial in. SLIP (Serial Line
+	  Internet Protocol) is a protocol used to send Internet traffic over
+	  serial connections such as telephone lines or null modem cables;
+	  nowadays, the protocol PPP is more commonly used for this same
+	  purpose.
+
+	  Normally, your access provider has to support SLIP in order for you
+	  to be able to use it, but there is now a SLIP emulator called SLiRP
+	  around (available from
+	  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
+	  allows you to use SLIP over a regular dial up shell connection. If
+	  you plan to use SLiRP, make sure to say Y to CSLIP, below. The
+	  NET-3-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, explains how to
+	  configure SLIP. Note that you don't need this option if you just
+	  want to run term (term is a program which gives you almost full
+	  Internet connectivity if you have a regular dial up shell account on
+	  some Internet connected Unix computer. Read
+	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
+	  support will enlarge your kernel by about 4 KB. If unsure, say N.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module will be
+	  called slip.
+
+config SLIP_COMPRESSED
+	bool "CSLIP compressed headers"
+	depends on SLIP
+	select SLHC
+	---help---
+	  This protocol is faster than SLIP because it uses compression on the
+	  TCP/IP headers (not on the data itself), but it has to be supported
+	  on both ends. Ask your access provider if you are not sure and
+	  answer Y, just in case. You will still be able to use plain SLIP. If
+	  you plan to use SLiRP, the SLIP emulator (available from
+	  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
+	  allows you to use SLIP over a regular dial up shell connection, you
+	  definitely want to say Y here. The NET-3-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, explains how to configure
+	  CSLIP. This won't enlarge your kernel.
+
+config SLHC
+	tristate
+	help
+	  This option enables Van Jacobsen serial line header compression
+	  routines.
+
+config SLIP_SMART
+	bool "Keepalive and linefill"
+	depends on SLIP
+	help
+	  Adds additional capabilities to the SLIP driver to support the
+	  RELCOM line fill and keepalive monitoring. Ideal on poor quality
+	  analogue lines.
+
+config SLIP_MODE_SLIP6
+	bool "Six bit SLIP encapsulation"
+	depends on SLIP
+	help
+	  Just occasionally you may need to run IP over hostile serial
+	  networks that don't pass all control characters or are only seven
+	  bit. Saying Y here adds an extra mode you can use with SLIP:
+	  "slip6". In this mode, SLIP will only send normal ASCII symbols over
+	  the serial device. Naturally, this has to be supported at the other
+	  end of the link as well. It's good enough, for example, to run IP
+	  over the async ports of a Camtec JNT Pad. If unsure, say N.
+
+config NET_FC
+	bool "Fibre Channel driver support"
+	depends on SCSI && PCI
+	help
+	  Fibre Channel is a high speed serial protocol mainly used to connect
+	  large storage devices to the computer; it is compatible with and
+	  intended to replace SCSI.
+
+	  If you intend to use Fibre Channel, you need to have a Fibre channel
+	  adaptor card in your computer; say Y here and to the driver for your
+	  adaptor below. You also should have said Y to "SCSI support" and
+	  "SCSI generic support".
+
+config SHAPER
+	tristate "Traffic Shaper (OBSOLETE)"
+	depends on EXPERIMENTAL
+	---help---
+	  The traffic shaper is a virtual network device that allows you to
+	  limit the rate of outgoing data flow over some other network device.
+	  The traffic that you want to slow down can then be routed through
+	  these virtual devices. See
+	  <file:Documentation/networking/shaper.txt> for more information.
+
+	  An alternative to this traffic shaper are traffic schedulers which
+	  you'll get if you say Y to "QoS and/or fair queuing" in
+	  "Networking options".
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called shaper.  If unsure, say N.
+
+config NETCONSOLE
+	tristate "Network console logging support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	If you want to log kernel messages over the network, enable this.
+	See <file:Documentation/networking/netconsole.txt> for details.
+
+endif #NETDEVICES
+
+config NETPOLL
+	def_bool NETCONSOLE
+
+config NETPOLL_RX
+	bool "Netpoll support for trapping incoming packets"
+	default n
+	depends on NETPOLL
+
+config NETPOLL_TRAP
+	bool "Netpoll traffic trapping"
+	default n
+	depends on NETPOLL
+
+config NET_POLL_CONTROLLER
+	def_bool NETPOLL
+
+endmenu
diff -Nur linux-2.6.21.1/drivers/net/Makefile linux-2.6.21.1-owrt/drivers/net/Makefile
--- linux-2.6.21.1/drivers/net/Makefile	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/drivers/net/Makefile	2007-05-23 23:37:01.000000000 +0200
@@ -11,6 +11,7 @@
 obj-$(CONFIG_BONDING) += bonding/
 obj-$(CONFIG_ATL1) += atl1/
 obj-$(CONFIG_GIANFAR) += gianfar_driver.o
+obj-$(CONFIG_AR2313) += ar2313/
 
 gianfar_driver-objs := gianfar.o \
 		gianfar_ethtool.o \
@@ -38,6 +39,7 @@
 obj-$(CONFIG_MACE) += mace.o
 obj-$(CONFIG_BMAC) += bmac.o
 
+obj-$(CONFIG_IDT_RC32434_ETH) += rc32434_eth.o
 obj-$(CONFIG_DGRS) += dgrs.o
 obj-$(CONFIG_VORTEX) += 3c59x.o
 obj-$(CONFIG_TYPHOON) += typhoon.o
diff -Nur linux-2.6.21.1/drivers/net/Makefile.orig linux-2.6.21.1-owrt/drivers/net/Makefile.orig
--- linux-2.6.21.1/drivers/net/Makefile.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.21.1-owrt/drivers/net/Makefile.orig	2007-05-23 23:34:01.000000000 +0200
@@ -0,0 +1,221 @@
+#
+# Makefile for the Linux network (ethercard) device drivers.
+#
+
+obj-$(CONFIG_E1000) += e1000/
+obj-$(CONFIG_IBM_EMAC) += ibm_emac/
+obj-$(CONFIG_IXGB) += ixgb/
+obj-$(CONFIG_CHELSIO_T1) += chelsio/
+obj-$(CONFIG_CHELSIO_T3) += cxgb3/
+obj-$(CONFIG_EHEA) += ehea/
+obj-$(CONFIG_BONDING) += bonding/
+obj-$(CONFIG_ATL1) += atl1/
+obj-$(CONFIG_GIANFAR) += gianfar_driver.o
+
+gianfar_driver-objs := gianfar.o \
+		gianfar_ethtool.o \
+		gianfar_mii.o \
+		gianfar_sysfs.o
+
+obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
+ucc_geth_driver-objs := ucc_geth.o ucc_geth_phy.o
+
+#
+# link order important here
+#
+obj-$(CONFIG_PLIP) += plip.o
+
+obj-$(CONFIG_ROADRUNNER) += rrunner.o
+
+obj-$(CONFIG_HAPPYMEAL) += sunhme.o
+obj-$(CONFIG_SUNLANCE) += sunlance.o
+obj-$(CONFIG_SUNQE) += sunqe.o
+obj-$(CONFIG_SUNBMAC) += sunbmac.o
+obj-$(CONFIG_MYRI_SBUS) += myri_sbus.o
+obj-$(CONFIG_SUNGEM) += sungem.o sungem_phy.o
+obj-$(CONFIG_CASSINI) += cassini.o
+
+obj-$(CONFIG_MACE) += mace.o
+obj-$(CONFIG_BMAC) += bmac.o
+
+obj-$(CONFIG_IDT_RC32434_ETH) += rc32434_eth.o
+obj-$(CONFIG_DGRS) += dgrs.o
+obj-$(CONFIG_VORTEX) += 3c59x.o
+obj-$(CONFIG_TYPHOON) += typhoon.o
+obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
+obj-$(CONFIG_PCNET32) += pcnet32.o
+obj-$(CONFIG_EEPRO100) += eepro100.o
+obj-$(CONFIG_E100) += e100.o
+obj-$(CONFIG_TLAN) += tlan.o
+obj-$(CONFIG_EPIC100) += epic100.o
+obj-$(CONFIG_SIS190) += sis190.o
+obj-$(CONFIG_SIS900) += sis900.o
+obj-$(CONFIG_YELLOWFIN) += yellowfin.o
+obj-$(CONFIG_ACENIC) += acenic.o
+obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o
+obj-$(CONFIG_NATSEMI) += natsemi.o
+obj-$(CONFIG_NS83820) += ns83820.o
+obj-$(CONFIG_STNIC) += stnic.o 8390.o
+obj-$(CONFIG_FEALNX) += fealnx.o
+obj-$(CONFIG_TIGON3) += tg3.o
+obj-$(CONFIG_BNX2) += bnx2.o
+spidernet-y += spider_net.o spider_net_ethtool.o
+obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
+obj-$(CONFIG_TC35815) += tc35815.o
+obj-$(CONFIG_SKGE) += skge.o
+obj-$(CONFIG_SKY2) += sky2.o
+obj-$(CONFIG_SK98LIN) += sk98lin/
+obj-$(CONFIG_SKFP) += skfp/
+obj-$(CONFIG_VIA_RHINE) += via-rhine.o
+obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
+obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
+obj-$(CONFIG_RIONET) += rionet.o
+
+#
+# end link order section
+#
+
+obj-$(CONFIG_MII) += mii.o
+obj-$(CONFIG_PHYLIB) += phy/
+
+obj-$(CONFIG_SUNDANCE) += sundance.o
+obj-$(CONFIG_HAMACHI) += hamachi.o
+obj-$(CONFIG_NET) += Space.o loopback.o
+obj-$(CONFIG_SEEQ8005) += seeq8005.o
+obj-$(CONFIG_NET_SB1000) += sb1000.o
+obj-$(CONFIG_MAC8390) += mac8390.o
+obj-$(CONFIG_APNE) += apne.o 8390.o
+obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
+obj-$(CONFIG_SHAPER) += shaper.o
+obj-$(CONFIG_HP100) += hp100.o
+obj-$(CONFIG_SMC9194) += smc9194.o
+obj-$(CONFIG_FEC) += fec.o
+obj-$(CONFIG_68360_ENET) += 68360enet.o
+obj-$(CONFIG_WD80x3) += wd.o 8390.o
+obj-$(CONFIG_EL2) += 3c503.o 8390.o
+obj-$(CONFIG_NE2000) += ne.o 8390.o
+obj-$(CONFIG_NE2_MCA) += ne2.o 8390.o
+obj-$(CONFIG_HPLAN) += hp.o 8390.o
+obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o
+obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
+obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o
+obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
+obj-$(CONFIG_E2100) += e2100.o 8390.o
+obj-$(CONFIG_ES3210) += es3210.o 8390.o
+obj-$(CONFIG_LNE390) += lne390.o 8390.o
+obj-$(CONFIG_NE3210) += ne3210.o 8390.o
+obj-$(CONFIG_NET_SB1250_MAC) += sb1250-mac.o
+obj-$(CONFIG_B44) += b44.o
+obj-$(CONFIG_FORCEDETH) += forcedeth.o
+obj-$(CONFIG_NE_H8300) += ne-h8300.o
+
+obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
+obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
+obj-$(CONFIG_QLA3XXX) += qla3xxx.o
+
+obj-$(CONFIG_PPP) += ppp_generic.o
+obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
+obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
+obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
+obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
+obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o
+obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
+
+obj-$(CONFIG_SLIP) += slip.o
+obj-$(CONFIG_SLHC) += slhc.o
+
+obj-$(CONFIG_DUMMY) += dummy.o
+obj-$(CONFIG_IFB) += ifb.o
+obj-$(CONFIG_DE600) += de600.o
+obj-$(CONFIG_DE620) += de620.o
+obj-$(CONFIG_LANCE) += lance.o
+obj-$(CONFIG_SUN3_82586) += sun3_82586.o
+obj-$(CONFIG_SUN3LANCE) += sun3lance.o
+obj-$(CONFIG_DEFXX) += defxx.o
+obj-$(CONFIG_SGISEEQ) += sgiseeq.o
+obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
+obj-$(CONFIG_AT1700) += at1700.o
+obj-$(CONFIG_EL1) += 3c501.o
+obj-$(CONFIG_EL16) += 3c507.o
+obj-$(CONFIG_ELMC) += 3c523.o
+obj-$(CONFIG_IBMLANA) += ibmlana.o
+obj-$(CONFIG_ELMC_II) += 3c527.o
+obj-$(CONFIG_EL3) += 3c509.o
+obj-$(CONFIG_3C515) += 3c515.o
+obj-$(CONFIG_EEXPRESS) += eexpress.o
+obj-$(CONFIG_EEXPRESS_PRO) += eepro.o
+obj-$(CONFIG_8139CP) += 8139cp.o
+obj-$(CONFIG_8139TOO) += 8139too.o
+obj-$(CONFIG_ZNET) += znet.o
+obj-$(CONFIG_LAN_SAA9730) += saa9730.o
+obj-$(CONFIG_DEPCA) += depca.o
+obj-$(CONFIG_EWRK3) += ewrk3.o
+obj-$(CONFIG_ATP) += atp.o
+obj-$(CONFIG_NI5010) += ni5010.o
+obj-$(CONFIG_NI52) += ni52.o
+obj-$(CONFIG_NI65) += ni65.o
+obj-$(CONFIG_ELPLUS) += 3c505.o
+obj-$(CONFIG_AC3200) += ac3200.o 8390.o
+obj-$(CONFIG_APRICOT) += 82596.o
+obj-$(CONFIG_LASI_82596) += lasi_82596.o
+obj-$(CONFIG_MVME16x_NET) += 82596.o
+obj-$(CONFIG_BVME6000_NET) += 82596.o
+obj-$(CONFIG_SC92031) += sc92031.o
+
+# This is also a 82596 and should probably be merged
+obj-$(CONFIG_LP486E) += lp486e.o
+
+obj-$(CONFIG_ETH16I) += eth16i.o
+obj-$(CONFIG_ZORRO8390) += zorro8390.o
+obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
+obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
+obj-$(CONFIG_EQUALIZER) += eql.o
+obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
+obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
+obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
+obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
+obj-$(CONFIG_DECLANCE) += declance.o
+obj-$(CONFIG_ATARILANCE) += atarilance.o
+obj-$(CONFIG_ATARI_BIONET) += atari_bionet.o
+obj-$(CONFIG_ATARI_PAMSNET) += atari_pamsnet.o
+obj-$(CONFIG_A2065) += a2065.o
+obj-$(CONFIG_HYDRA) += hydra.o
+obj-$(CONFIG_ARIADNE) += ariadne.o
+obj-$(CONFIG_CS89x0) += cs89x0.o
+obj-$(CONFIG_MACSONIC) += macsonic.o
+obj-$(CONFIG_MACMACE) += macmace.o
+obj-$(CONFIG_MAC89x0) += mac89x0.o
+obj-$(CONFIG_TUN) += tun.o
+obj-$(CONFIG_NET_NETX) += netx-eth.o
+obj-$(CONFIG_DL2K) += dl2k.o
+obj-$(CONFIG_R8169) += r8169.o
+obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
+obj-$(CONFIG_IBMVETH) += ibmveth.o
+obj-$(CONFIG_S2IO) += s2io.o
+obj-$(CONFIG_MYRI10GE) += myri10ge/
+obj-$(CONFIG_SMC91X) += smc91x.o
+obj-$(CONFIG_SMC911X) += smc911x.o
+obj-$(CONFIG_DM9000) += dm9000.o
+obj-$(CONFIG_FEC_8XX) += fec_8xx/
+obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
+
+obj-$(CONFIG_MACB) += macb.o
+
+obj-$(CONFIG_ARM) += arm/
+obj-$(CONFIG_DEV_APPLETALK) += appletalk/
+obj-$(CONFIG_TR) += tokenring/
+obj-$(CONFIG_WAN) += wan/
+obj-$(CONFIG_ARCNET) += arcnet/
+obj-$(CONFIG_NET_PCMCIA) += pcmcia/
+obj-$(CONFIG_NET_RADIO) += wireless/
+obj-$(CONFIG_NET_TULIP) += tulip/
+obj-$(CONFIG_HAMRADIO) += hamradio/
+obj-$(CONFIG_IRDA) += irda/
+obj-$(CONFIG_ETRAX_ETHERNET) += cris/
+obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
+
+obj-$(CONFIG_NETCONSOLE) += netconsole.o
+
+obj-$(CONFIG_FS_ENET) += fs_enet/
+
+obj-$(CONFIG_NETXEN_NIC) += netxen/
diff -Nur linux-2.6.21.1/drivers/net/natsemi.c linux-2.6.21.1-owrt/drivers/net/natsemi.c
--- linux-2.6.21.1/drivers/net/natsemi.c	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/drivers/net/natsemi.c	2007-05-23 23:34:01.000000000 +0200
@@ -656,6 +656,49 @@
 static int netdev_get_eeprom(struct net_device *dev, u8 *buf);
 static const struct ethtool_ops ethtool_ops;
 
+#ifdef CONFIG_MACH_ARUBA
+
+#include <linux/ctype.h>
+
+#ifndef ERR
+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
+#endif
+
+static int parse_mac_addr(struct net_device *dev, char* macstr)
+{
+        int i, j;
+        unsigned char result, value;
+
+        for (i=0; i<6; i++) {
+                result = 0;
+                if (i != 5 && *(macstr+2) != ':') {
+                        ERR("invalid mac address format: %d %c\n",
+                            i, *(macstr+2));
+                        return -EINVAL;
+                }
+                for (j=0; j<2; j++) {
+                        if (isxdigit(*macstr) && (value = isdigit(*macstr) ? *macstr-'0' :
+                                                  toupper(*macstr)-'A'+10) < 16) {
+                                result = result*16 + value;
+                                macstr++;
+                        }
+                        else {
+                                ERR("invalid mac address "
+                                    "character: %c\n", *macstr);
+                                return -EINVAL;
+                        }
+                }
+
+                macstr++;
+                dev->dev_addr[i] = result;
+        }
+
+	dev->dev_addr[5]++;
+        return 0;
+}
+
+#endif
+
 static inline void __iomem *ns_ioaddr(struct net_device *dev)
 {
 	return (void __iomem *) dev->base_addr;
@@ -794,6 +837,7 @@
 		goto err_ioremap;
 	}
 
+#ifndef CONFIG_MACH_ARUBA
 	/* Work around the dropped serial bit. */
 	prev_eedata = eeprom_read(ioaddr, 6);
 	for (i = 0; i < 3; i++) {
@@ -802,6 +846,19 @@
 		dev->dev_addr[i*2+1] = eedata >> 7;
 		prev_eedata = eedata;
 	}
+#else
+	{
+		char mac[32];
+		unsigned char def_mac[6] = {00, 0x0b, 0x86, 0xba, 0xdb, 0xad};
+		extern char *getenv(char *e);
+		memset(mac, 0, 32);
+		memcpy(mac, getenv("ethaddr"), 17);
+		if (parse_mac_addr(dev, mac)){
+			printk("%s: MAC address not found\n", __func__);
+			memcpy(dev->dev_addr, def_mac, 6);
+		}
+	}
+#endif
 
 	dev->base_addr = (unsigned long __force) ioaddr;
 	dev->irq = irq;
diff -Nur linux-2.6.21.1/drivers/pci/access.c linux-2.6.21.1-owrt/drivers/pci/access.c
--- linux-2.6.21.1/drivers/pci/access.c	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/drivers/pci/access.c	2007-05-23 23:36:48.000000000 +0200
@@ -23,6 +23,7 @@
 #define PCI_word_BAD (pos & 1)
 #define PCI_dword_BAD (pos & 3)
 
+#ifdef __MIPSEB__
 #define PCI_OP_READ(size,type,len) \
 int pci_bus_read_config_##size \
 	(struct pci_bus *bus, unsigned int devfn, int pos, type *value)	\
@@ -33,11 +34,32 @@
 	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
 	spin_lock_irqsave(&pci_lock, flags);				\
 	res = bus->ops->read(bus, devfn, pos, len, &data);		\
+	if (len == 1)							\
+	 *value = (type)((data >> 24) & 0xff);				\
+	 else if (len == 2)						\
+	 *value = (type)((data >> 16) & 0xffff);			\
+	else								\
 	*value = (type)data;						\
 	spin_unlock_irqrestore(&pci_lock, flags);			\
 	return res;							\
 }
+#else
 
+#define PCI_OP_READ(size,type,len) \
+int pci_bus_read_config_##size \
+	(struct pci_bus *bus, unsigned int devfn, int pos, type *value) \
+{									\
+	int res;							\
+	unsigned long flags;						\
+	u32 data = 0;							\
+	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
+	spin_lock_irqsave(&pci_lock, flags);				\
+	res = bus->ops->read(bus, devfn, pos, len, &data);		\
+	*value = (type)data;						\
+	spin_unlock_irqrestore(&pci_lock, flags);			\
+	return res;							\
+}
+#endif
 #define PCI_OP_WRITE(size,type,len) \
 int pci_bus_write_config_##size \
 	(struct pci_bus *bus, unsigned int devfn, int pos, type value)	\
diff -Nur linux-2.6.21.1/drivers/pci/access.c.orig linux-2.6.21.1-owrt/drivers/pci/access.c.orig
--- linux-2.6.21.1/drivers/pci/access.c.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.21.1-owrt/drivers/pci/access.c.orig	2007-04-27 23:49:26.000000000 +0200
@@ -0,0 +1,173 @@
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/wait.h>
+
+#include "pci.h"
+
+/*
+ * This interrupt-safe spinlock protects all accesses to PCI
+ * configuration space.
+ */
+
+static DEFINE_SPINLOCK(pci_lock);
+
+/*
+ *  Wrappers for all PCI configuration access functions.  They just check
+ *  alignment, do locking and call the low-level functions pointed to
+ *  by pci_dev->ops.
+ */
+
+#define PCI_byte_BAD 0
+#define PCI_word_BAD (pos & 1)
+#define PCI_dword_BAD (pos & 3)
+
+#define PCI_OP_READ(size,type,len) \
+int pci_bus_read_config_##size \
+	(struct pci_bus *bus, unsigned int devfn, int pos, type *value)	\
+{									\
+	int res;							\
+	unsigned long flags;						\
+	u32 data = 0;							\
+	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
+	spin_lock_irqsave(&pci_lock, flags);				\
+	res = bus->ops->read(bus, devfn, pos, len, &data);		\
+	*value = (type)data;						\
+	spin_unlock_irqrestore(&pci_lock, flags);			\
+	return res;							\
+}
+
+#define PCI_OP_WRITE(size,type,len) \
+int pci_bus_write_config_##size \
+	(struct pci_bus *bus, unsigned int devfn, int pos, type value)	\
+{									\
+	int res;							\
+	unsigned long flags;						\
+	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
+	spin_lock_irqsave(&pci_lock, flags);				\
+	res = bus->ops->write(bus, devfn, pos, len, value);		\
+	spin_unlock_irqrestore(&pci_lock, flags);			\
+	return res;							\
+}
+
+PCI_OP_READ(byte, u8, 1)
+PCI_OP_READ(word, u16, 2)
+PCI_OP_READ(dword, u32, 4)
+PCI_OP_WRITE(byte, u8, 1)
+PCI_OP_WRITE(word, u16, 2)
+PCI_OP_WRITE(dword, u32, 4)
+
+EXPORT_SYMBOL(pci_bus_read_config_byte);
+EXPORT_SYMBOL(pci_bus_read_config_word);
+EXPORT_SYMBOL(pci_bus_read_config_dword);
+EXPORT_SYMBOL(pci_bus_write_config_byte);
+EXPORT_SYMBOL(pci_bus_write_config_word);
+EXPORT_SYMBOL(pci_bus_write_config_dword);
+
+/*
+ * The following routines are to prevent the user from accessing PCI config
+ * space when it's unsafe to do so.  Some devices require this during BIST and
+ * we're required to prevent it during D-state transitions.
+ *
+ * We have a bit per device to indicate it's blocked and a global wait queue
+ * for callers to sleep on until devices are unblocked.
+ */
+static DECLARE_WAIT_QUEUE_HEAD(pci_ucfg_wait);
+
+static noinline void pci_wait_ucfg(struct pci_dev *dev)
+{
+	DECLARE_WAITQUEUE(wait, current);
+
+	__add_wait_queue(&pci_ucfg_wait, &wait);
+	do {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		spin_unlock_irq(&pci_lock);
+		schedule();
+		spin_lock_irq(&pci_lock);
+	} while (dev->block_ucfg_access);
+	__remove_wait_queue(&pci_ucfg_wait, &wait);
+}
+
+#define PCI_USER_READ_CONFIG(size,type)					\
+int pci_user_read_config_##size						\
+	(struct pci_dev *dev, int pos, type *val)			\
+{									\
+	int ret = 0;							\
+	u32 data = -1;							\
+	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
+	spin_lock_irq(&pci_lock);					\
+	if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev);	\
+	ret = dev->bus->ops->read(dev->bus, dev->devfn,			\
+					pos, sizeof(type), &data);	\
+	spin_unlock_irq(&pci_lock);					\
+	*val = (type)data;						\
+	return ret;							\
+}
+
+#define PCI_USER_WRITE_CONFIG(size,type)				\
+int pci_user_write_config_##size					\
+	(struct pci_dev *dev, int pos, type val)			\
+{									\
+	int ret = -EIO;							\
+	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
+	spin_lock_irq(&pci_lock);					\
+	if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev);	\
+	ret = dev->bus->ops->write(dev->bus, dev->devfn,		\
+					pos, sizeof(type), val);	\
+	spin_unlock_irq(&pci_lock);					\
+	return ret;							\
+}
+
+PCI_USER_READ_CONFIG(byte, u8)
+PCI_USER_READ_CONFIG(word, u16)
+PCI_USER_READ_CONFIG(dword, u32)
+PCI_USER_WRITE_CONFIG(byte, u8)
+PCI_USER_WRITE_CONFIG(word, u16)
+PCI_USER_WRITE_CONFIG(dword, u32)
+
+/**
+ * pci_block_user_cfg_access - Block userspace PCI config reads/writes
+ * @dev:	pci device struct
+ *
+ * When user access is blocked, any reads or writes to config space will
+ * sleep until access is unblocked again.  We don't allow nesting of
+ * block/unblock calls.
+ */
+void pci_block_user_cfg_access(struct pci_dev *dev)
+{
+	unsigned long flags;
+	int was_blocked;
+
+	spin_lock_irqsave(&pci_lock, flags);
+	was_blocked = dev->block_ucfg_access;
+	dev->block_ucfg_access = 1;
+	spin_unlock_irqrestore(&pci_lock, flags);
+
+	/* If we BUG() inside the pci_lock, we're guaranteed to hose
+	 * the machine */
+	BUG_ON(was_blocked);
+}
+EXPORT_SYMBOL_GPL(pci_block_user_cfg_access);
+
+/**
+ * pci_unblock_user_cfg_access - Unblock userspace PCI config reads/writes
+ * @dev:	pci device struct
+ *
+ * This function allows userspace PCI config accesses to resume.
+ */
+void pci_unblock_user_cfg_access(struct pci_dev *dev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pci_lock, flags);
+
+	/* This indicates a problem in the caller, but we don't need
+	 * to kill them, unlike a double-block above. */
+	WARN_ON(!dev->block_ucfg_access);
+
+	dev->block_ucfg_access = 0;
+	wake_up_all(&pci_ucfg_wait);
+	spin_unlock_irqrestore(&pci_lock, flags);
+}
+EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access);
diff -Nur linux-2.6.21.1/drivers/serial/8250.c linux-2.6.21.1-owrt/drivers/serial/8250.c
--- linux-2.6.21.1/drivers/serial/8250.c	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/drivers/serial/8250.c	2007-05-23 23:37:11.000000000 +0200
@@ -1635,7 +1635,7 @@
 {
 	struct uart_8250_port *up = (struct uart_8250_port *)port;
 	unsigned long flags;
-	unsigned char lsr, iir;
+//	unsigned char lsr, iir;
 	int retval;
 
 	up->capabilities = uart_config[up->port.type].flags;
@@ -1772,6 +1772,8 @@
 
 	serial8250_set_mctrl(&up->port, up->port.mctrl);
 
+// For some reason this test causes problems on the AP6x serial console
+#if 0
 	/*
 	 * Do a quick test to see if we receive an
 	 * interrupt when we enable the TX irq.
@@ -1790,7 +1792,8 @@
 	} else {
 		up->bugs &= ~UART_BUG_TXEN;
 	}
-
+#endif
+	
 	spin_unlock_irqrestore(&up->port.lock, flags);
 
 	/*
diff -Nur linux-2.6.21.1/drivers/serial/8250.c.orig linux-2.6.21.1-owrt/drivers/serial/8250.c.orig
--- linux-2.6.21.1/drivers/serial/8250.c.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.21.1-owrt/drivers/serial/8250.c.orig	2007-04-27 23:49:26.000000000 +0200
@@ -0,0 +1,2817 @@
+/*
+ *  linux/drivers/char/8250.c
+ *
+ *  Driver for 8250/16550-type serial ports
+ *
+ *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ *  Copyright (C) 2001 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *  $Id: 8250.c,v 1.90 2002/07/28 10:03:27 rmk Exp $
+ *
+ * A note about mapbase / membase
+ *
+ *  mapbase is the physical address of the IO port.
+ *  membase is an 'ioremapped' cookie.
+ */
+
+#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/nmi.h>
+#include <linux/mutex.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include "8250.h"
+
+/*
+ * Configuration:
+ *   share_irqs - whether we pass IRQF_SHARED to request_irq().  This option
+ *                is unsafe when used on edge-triggered interrupts.
+ */
+static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
+
+static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
+
+/*
+ * Debugging.
+ */
+#if 0
+#define DEBUG_AUTOCONF(fmt...)	printk(fmt)
+#else
+#define DEBUG_AUTOCONF(fmt...)	do { } while (0)
+#endif
+
+#if 0
+#define DEBUG_INTR(fmt...)	printk(fmt)
+#else
+#define DEBUG_INTR(fmt...)	do { } while (0)
+#endif
+
+#define PASS_LIMIT	256
+
+/*
+ * We default to IRQ0 for the "no irq" hack.   Some
+ * machine types want others as well - they're free
+ * to redefine this in their header file.
+ */
+#define is_real_interrupt(irq)	((irq) != 0)
+
+#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
+#define CONFIG_SERIAL_DETECT_IRQ 1
+#endif
+#ifdef CONFIG_SERIAL_8250_MANY_PORTS
+#define CONFIG_SERIAL_MANY_PORTS 1
+#endif
+
+/*
+ * HUB6 is always on.  This will be removed once the header
+ * files have been cleaned.
+ */
+#define CONFIG_HUB6 1
+
+#include <asm/serial.h>
+
+/*
+ * SERIAL_PORT_DFNS tells us about built-in ports that have no
+ * standard enumeration mechanism.   Platforms that can find all
+ * serial ports via mechanisms like ACPI or PCI need not supply it.
+ */
+#ifndef SERIAL_PORT_DFNS
+#define SERIAL_PORT_DFNS
+#endif
+
+static const struct old_serial_port old_serial_port[] = {
+	SERIAL_PORT_DFNS /* defined in asm/serial.h */
+};
+
+#define UART_NR	CONFIG_SERIAL_8250_NR_UARTS
+
+#ifdef CONFIG_SERIAL_8250_RSA
+
+#define PORT_RSA_MAX 4
+static unsigned long probe_rsa[PORT_RSA_MAX];
+static unsigned int probe_rsa_count;
+#endif /* CONFIG_SERIAL_8250_RSA  */
+
+struct uart_8250_port {
+	struct uart_port	port;
+	struct timer_list	timer;		/* "no irq" timer */
+	struct list_head	list;		/* ports on this IRQ */
+	unsigned short		capabilities;	/* port capabilities */
+	unsigned short		bugs;		/* port bugs */
+	unsigned int		tx_loadsz;	/* transmit fifo load size */
+	unsigned char		acr;
+	unsigned char		ier;
+	unsigned char		lcr;
+	unsigned char		mcr;
+	unsigned char		mcr_mask;	/* mask of user bits */
+	unsigned char		mcr_force;	/* mask of forced bits */
+	unsigned char		lsr_break_flag;
+
+	/*
+	 * We provide a per-port pm hook.
+	 */
+	void			(*pm)(struct uart_port *port,
+				      unsigned int state, unsigned int old);
+};
+
+struct irq_info {
+	spinlock_t		lock;
+	struct list_head	*head;
+};
+
+static struct irq_info irq_lists[NR_IRQS];
+
+/*
+ * Here we define the default xmit fifo size used for each type of UART.
+ */
+static const struct serial8250_config uart_config[] = {
+	[PORT_UNKNOWN] = {
+		.name		= "unknown",
+		.fifo_size	= 1,
+		.tx_loadsz	= 1,
+	},
+	[PORT_8250] = {
+		.name		= "8250",
+		.fifo_size	= 1,
+		.tx_loadsz	= 1,
+	},
+	[PORT_16450] = {
+		.name		= "16450",
+		.fifo_size	= 1,
+		.tx_loadsz	= 1,
+	},
+	[PORT_16550] = {
+		.name		= "16550",
+		.fifo_size	= 1,
+		.tx_loadsz	= 1,
+	},
+	[PORT_16550A] = {
+		.name		= "16550A",
+		.fifo_size	= 16,
+		.tx_loadsz	= 16,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.flags		= UART_CAP_FIFO,
+	},
+	[PORT_CIRRUS] = {
+		.name		= "Cirrus",
+		.fifo_size	= 1,
+		.tx_loadsz	= 1,
+	},
+	[PORT_16650] = {
+		.name		= "ST16650",
+		.fifo_size	= 1,
+		.tx_loadsz	= 1,
+		.flags		= UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+	},
+	[PORT_16650V2] = {
+		.name		= "ST16650V2",
+		.fifo_size	= 32,
+		.tx_loadsz	= 16,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
+				  UART_FCR_T_TRIG_00,
+		.flags		= UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+	},
+	[PORT_16750] = {
+		.name		= "TI16750",
+		.fifo_size	= 64,
+		.tx_loadsz	= 64,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
+				  UART_FCR7_64BYTE,
+		.flags		= UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE,
+	},
+	[PORT_STARTECH] = {
+		.name		= "Startech",
+		.fifo_size	= 1,
+		.tx_loadsz	= 1,
+	},
+	[PORT_16C950] = {
+		.name		= "16C950/954",
+		.fifo_size	= 128,
+		.tx_loadsz	= 128,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.flags		= UART_CAP_FIFO,
+	},
+	[PORT_16654] = {
+		.name		= "ST16654",
+		.fifo_size	= 64,
+		.tx_loadsz	= 32,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
+				  UART_FCR_T_TRIG_10,
+		.flags		= UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+	},
+	[PORT_16850] = {
+		.name		= "XR16850",
+		.fifo_size	= 128,
+		.tx_loadsz	= 128,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.flags		= UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+	},
+	[PORT_RSA] = {
+		.name		= "RSA",
+		.fifo_size	= 2048,
+		.tx_loadsz	= 2048,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11,
+		.flags		= UART_CAP_FIFO,
+	},
+	[PORT_NS16550A] = {
+		.name		= "NS16550A",
+		.fifo_size	= 16,
+		.tx_loadsz	= 16,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.flags		= UART_CAP_FIFO | UART_NATSEMI,
+	},
+	[PORT_XSCALE] = {
+		.name		= "XScale",
+		.fifo_size	= 32,
+		.tx_loadsz	= 32,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.flags		= UART_CAP_FIFO | UART_CAP_UUE,
+	},
+};
+
+#ifdef CONFIG_SERIAL_8250_AU1X00
+
+/* Au1x00 UART hardware has a weird register layout */
+static const u8 au_io_in_map[] = {
+	[UART_RX]  = 0,
+	[UART_IER] = 2,
+	[UART_IIR] = 3,
+	[UART_LCR] = 5,
+	[UART_MCR] = 6,
+	[UART_LSR] = 7,
+	[UART_MSR] = 8,
+};
+
+static const u8 au_io_out_map[] = {
+	[UART_TX]  = 1,
+	[UART_IER] = 2,
+	[UART_FCR] = 4,
+	[UART_LCR] = 5,
+	[UART_MCR] = 6,
+};
+
+/* sane hardware needs no mapping */
+static inline int map_8250_in_reg(struct uart_8250_port *up, int offset)
+{
+	if (up->port.iotype != UPIO_AU)
+		return offset;
+	return au_io_in_map[offset];
+}
+
+static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
+{
+	if (up->port.iotype != UPIO_AU)
+		return offset;
+	return au_io_out_map[offset];
+}
+
+#else
+
+/* sane hardware needs no mapping */
+#define map_8250_in_reg(up, offset) (offset)
+#define map_8250_out_reg(up, offset) (offset)
+
+#endif
+
+static unsigned int serial_in(struct uart_8250_port *up, int offset)
+{
+	unsigned int tmp;
+	offset = map_8250_in_reg(up, offset) << up->port.regshift;
+
+	switch (up->port.iotype) {
+	case UPIO_HUB6:
+		outb(up->port.hub6 - 1 + offset, up->port.iobase);
+		return inb(up->port.iobase + 1);
+
+	case UPIO_MEM:
+		return readb(up->port.membase + offset);
+
+	case UPIO_MEM32:
+		return readl(up->port.membase + offset);
+
+#ifdef CONFIG_SERIAL_8250_AU1X00
+	case UPIO_AU:
+		return __raw_readl(up->port.membase + offset);
+#endif
+
+	case UPIO_TSI:
+		if (offset == UART_IIR) {
+			tmp = readl(up->port.membase + (UART_IIR & ~3));
+			return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
+		} else
+			return readb(up->port.membase + offset);
+
+	default:
+		return inb(up->port.iobase + offset);
+	}
+}
+
+static void
+serial_out(struct uart_8250_port *up, int offset, int value)
+{
+	offset = map_8250_out_reg(up, offset) << up->port.regshift;
+
+	switch (up->port.iotype) {
+	case UPIO_HUB6:
+		outb(up->port.hub6 - 1 + offset, up->port.iobase);
+		outb(value, up->port.iobase + 1);
+		break;
+
+	case UPIO_MEM:
+		writeb(value, up->port.membase + offset);
+		break;
+
+	case UPIO_MEM32:
+		writel(value, up->port.membase + offset);
+		break;
+
+#ifdef CONFIG_SERIAL_8250_AU1X00
+	case UPIO_AU:
+		__raw_writel(value, up->port.membase + offset);
+		break;
+#endif
+	case UPIO_TSI:
+		if (!((offset == UART_IER) && (value & UART_IER_UUE)))
+			writeb(value, up->port.membase + offset);
+		break;
+
+	default:
+		outb(value, up->port.iobase + offset);
+	}
+}
+
+static void
+serial_out_sync(struct uart_8250_port *up, int offset, int value)
+{
+	switch (up->port.iotype) {
+	case UPIO_MEM:
+	case UPIO_MEM32:
+#ifdef CONFIG_SERIAL_8250_AU1X00
+	case UPIO_AU:
+#endif
+		serial_out(up, offset, value);
+		serial_in(up, UART_LCR);	/* safe, no side-effects */
+		break;
+	default:
+		serial_out(up, offset, value);
+	}
+}
+
+/*
+ * We used to support using pause I/O for certain machines.  We
+ * haven't supported this for a while, but just in case it's badly
+ * needed for certain old 386 machines, I've left these #define's
+ * in....
+ */
+#define serial_inp(up, offset)		serial_in(up, offset)
+#define serial_outp(up, offset, value)	serial_out(up, offset, value)
+
+/* Uart divisor latch read */
+static inline int _serial_dl_read(struct uart_8250_port *up)
+{
+	return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8;
+}
+
+/* Uart divisor latch write */
+static inline void _serial_dl_write(struct uart_8250_port *up, int value)
+{
+	serial_outp(up, UART_DLL, value & 0xff);
+	serial_outp(up, UART_DLM, value >> 8 & 0xff);
+}
+
+#ifdef CONFIG_SERIAL_8250_AU1X00
+/* Au1x00 haven't got a standard divisor latch */
+static int serial_dl_read(struct uart_8250_port *up)
+{
+	if (up->port.iotype == UPIO_AU)
+		return __raw_readl(up->port.membase + 0x28);
+	else
+		return _serial_dl_read(up);
+}
+
+static void serial_dl_write(struct uart_8250_port *up, int value)
+{
+	if (up->port.iotype == UPIO_AU)
+		__raw_writel(value, up->port.membase + 0x28);
+	else
+		_serial_dl_write(up, value);
+}
+#else
+#define serial_dl_read(up) _serial_dl_read(up)
+#define serial_dl_write(up, value) _serial_dl_write(up, value)
+#endif
+
+/*
+ * For the 16C950
+ */
+static void serial_icr_write(struct uart_8250_port *up, int offset, int value)
+{
+	serial_out(up, UART_SCR, offset);
+	serial_out(up, UART_ICR, value);
+}
+
+static unsigned int serial_icr_read(struct uart_8250_port *up, int offset)
+{
+	unsigned int value;
+
+	serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
+	serial_out(up, UART_SCR, offset);
+	value = serial_in(up, UART_ICR);
+	serial_icr_write(up, UART_ACR, up->acr);
+
+	return value;
+}
+
+/*
+ * FIFO support.
+ */
+static inline void serial8250_clear_fifos(struct uart_8250_port *p)
+{
+	if (p->capabilities & UART_CAP_FIFO) {
+		serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO);
+		serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO |
+			       UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+		serial_outp(p, UART_FCR, 0);
+	}
+}
+
+/*
+ * IER sleep support.  UARTs which have EFRs need the "extended
+ * capability" bit enabled.  Note that on XR16C850s, we need to
+ * reset LCR to write to IER.
+ */
+static inline void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
+{
+	if (p->capabilities & UART_CAP_SLEEP) {
+		if (p->capabilities & UART_CAP_EFR) {
+			serial_outp(p, UART_LCR, 0xBF);
+			serial_outp(p, UART_EFR, UART_EFR_ECB);
+			serial_outp(p, UART_LCR, 0);
+		}
+		serial_outp(p, UART_IER, sleep ? UART_IERX_SLEEP : 0);
+		if (p->capabilities & UART_CAP_EFR) {
+			serial_outp(p, UART_LCR, 0xBF);
+			serial_outp(p, UART_EFR, 0);
+			serial_outp(p, UART_LCR, 0);
+		}
+	}
+}
+
+#ifdef CONFIG_SERIAL_8250_RSA
+/*
+ * Attempts to turn on the RSA FIFO.  Returns zero on failure.
+ * We set the port uart clock rate if we succeed.
+ */
+static int __enable_rsa(struct uart_8250_port *up)
+{
+	unsigned char mode;
+	int result;
+
+	mode = serial_inp(up, UART_RSA_MSR);
+	result = mode & UART_RSA_MSR_FIFO;
+
+	if (!result) {
+		serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
+		mode = serial_inp(up, UART_RSA_MSR);
+		result = mode & UART_RSA_MSR_FIFO;
+	}
+
+	if (result)
+		up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
+
+	return result;
+}
+
+static void enable_rsa(struct uart_8250_port *up)
+{
+	if (up->port.type == PORT_RSA) {
+		if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
+			spin_lock_irq(&up->port.lock);
+			__enable_rsa(up);
+			spin_unlock_irq(&up->port.lock);
+		}
+		if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
+			serial_outp(up, UART_RSA_FRR, 0);
+	}
+}
+
+/*
+ * Attempts to turn off the RSA FIFO.  Returns zero on failure.
+ * It is unknown why interrupts were disabled in here.  However,
+ * the caller is expected to preserve this behaviour by grabbing
+ * the spinlock before calling this function.
+ */
+static void disable_rsa(struct uart_8250_port *up)
+{
+	unsigned char mode;
+	int result;
+
+	if (up->port.type == PORT_RSA &&
+	    up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
+		spin_lock_irq(&up->port.lock);
+
+		mode = serial_inp(up, UART_RSA_MSR);
+		result = !(mode & UART_RSA_MSR_FIFO);
+
+		if (!result) {
+			serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
+			mode = serial_inp(up, UART_RSA_MSR);
+			result = !(mode & UART_RSA_MSR_FIFO);
+		}
+
+		if (result)
+			up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
+		spin_unlock_irq(&up->port.lock);
+	}
+}
+#endif /* CONFIG_SERIAL_8250_RSA */
+
+/*
+ * This is a quickie test to see how big the FIFO is.
+ * It doesn't work at all the time, more's the pity.
+ */
+static int size_fifo(struct uart_8250_port *up)
+{
+	unsigned char old_fcr, old_mcr, old_lcr;
+	unsigned short old_dl;
+	int count;
+
+	old_lcr = serial_inp(up, UART_LCR);
+	serial_outp(up, UART_LCR, 0);
+	old_fcr = serial_inp(up, UART_FCR);
+	old_mcr = serial_inp(up, UART_MCR);
+	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+		    UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+	serial_outp(up, UART_MCR, UART_MCR_LOOP);
+	serial_outp(up, UART_LCR, UART_LCR_DLAB);
+	old_dl = serial_dl_read(up);
+	serial_dl_write(up, 0x0001);
+	serial_outp(up, UART_LCR, 0x03);
+	for (count = 0; count < 256; count++)
+		serial_outp(up, UART_TX, count);
+	mdelay(20);/* FIXME - schedule_timeout */
+	for (count = 0; (serial_inp(up, UART_LSR) & UART_LSR_DR) &&
+	     (count < 256); count++)
+		serial_inp(up, UART_RX);
+	serial_outp(up, UART_FCR, old_fcr);
+	serial_outp(up, UART_MCR, old_mcr);
+	serial_outp(up, UART_LCR, UART_LCR_DLAB);
+	serial_dl_write(up, old_dl);
+	serial_outp(up, UART_LCR, old_lcr);
+
+	return count;
+}
+
+/*
+ * Read UART ID using the divisor method - set DLL and DLM to zero
+ * and the revision will be in DLL and device type in DLM.  We
+ * preserve the device state across this.
+ */
+static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
+{
+	unsigned char old_dll, old_dlm, old_lcr;
+	unsigned int id;
+
+	old_lcr = serial_inp(p, UART_LCR);
+	serial_outp(p, UART_LCR, UART_LCR_DLAB);
+
+	old_dll = serial_inp(p, UART_DLL);
+	old_dlm = serial_inp(p, UART_DLM);
+
+	serial_outp(p, UART_DLL, 0);
+	serial_outp(p, UART_DLM, 0);
+
+	id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
+
+	serial_outp(p, UART_DLL, old_dll);
+	serial_outp(p, UART_DLM, old_dlm);
+	serial_outp(p, UART_LCR, old_lcr);
+
+	return id;
+}
+
+/*
+ * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's.
+ * When this function is called we know it is at least a StarTech
+ * 16650 V2, but it might be one of several StarTech UARTs, or one of
+ * its clones.  (We treat the broken original StarTech 16650 V1 as a
+ * 16550, and why not?  Startech doesn't seem to even acknowledge its
+ * existence.)
+ * 
+ * What evil have men's minds wrought...
+ */
+static void autoconfig_has_efr(struct uart_8250_port *up)
+{
+	unsigned int id1, id2, id3, rev;
+
+	/*
+	 * Everything with an EFR has SLEEP
+	 */
+	up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
+
+	/*
+	 * First we check to see if it's an Oxford Semiconductor UART.
+	 *
+	 * If we have to do this here because some non-National
+	 * Semiconductor clone chips lock up if you try writing to the
+	 * LSR register (which serial_icr_read does)
+	 */
+
+	/*
+	 * Check for Oxford Semiconductor 16C950.
+	 *
+	 * EFR [4] must be set else this test fails.
+	 *
+	 * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca)
+	 * claims that it's needed for 952 dual UART's (which are not
+	 * recommended for new designs).
+	 */
+	up->acr = 0;
+	serial_out(up, UART_LCR, 0xBF);
+	serial_out(up, UART_EFR, UART_EFR_ECB);
+	serial_out(up, UART_LCR, 0x00);
+	id1 = serial_icr_read(up, UART_ID1);
+	id2 = serial_icr_read(up, UART_ID2);
+	id3 = serial_icr_read(up, UART_ID3);
+	rev = serial_icr_read(up, UART_REV);
+
+	DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev);
+
+	if (id1 == 0x16 && id2 == 0xC9 &&
+	    (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) {
+		up->port.type = PORT_16C950;
+
+		/*
+		 * Enable work around for the Oxford Semiconductor 952 rev B
+		 * chip which causes it to seriously miscalculate baud rates
+		 * when DLL is 0.
+		 */
+		if (id3 == 0x52 && rev == 0x01)
+			up->bugs |= UART_BUG_QUOT;
+		return;
+	}
+	
+	/*
+	 * We check for a XR16C850 by setting DLL and DLM to 0, and then
+	 * reading back DLL and DLM.  The chip type depends on the DLM
+	 * value read back:
+	 *  0x10 - XR16C850 and the DLL contains the chip revision.
+	 *  0x12 - XR16C2850.
+	 *  0x14 - XR16C854.
+	 */
+	id1 = autoconfig_read_divisor_id(up);
+	DEBUG_AUTOCONF("850id=%04x ", id1);
+
+	id2 = id1 >> 8;
+	if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) {
+		up->port.type = PORT_16850;
+		return;
+	}
+
+	/*
+	 * It wasn't an XR16C850.
+	 *
+	 * We distinguish between the '654 and the '650 by counting
+	 * how many bytes are in the FIFO.  I'm using this for now,
+	 * since that's the technique that was sent to me in the
+	 * serial driver update, but I'm not convinced this works.
+	 * I've had problems doing this in the past.  -TYT
+	 */
+	if (size_fifo(up) == 64)
+		up->port.type = PORT_16654;
+	else
+		up->port.type = PORT_16650V2;
+}
+
+/*
+ * We detected a chip without a FIFO.  Only two fall into
+ * this category - the original 8250 and the 16450.  The
+ * 16450 has a scratch register (accessible with LCR=0)
+ */
+static void autoconfig_8250(struct uart_8250_port *up)
+{
+	unsigned char scratch, status1, status2;
+
+	up->port.type = PORT_8250;
+
+	scratch = serial_in(up, UART_SCR);
+	serial_outp(up, UART_SCR, 0xa5);
+	status1 = serial_in(up, UART_SCR);
+	serial_outp(up, UART_SCR, 0x5a);
+	status2 = serial_in(up, UART_SCR);
+	serial_outp(up, UART_SCR, scratch);
+
+	if (status1 == 0xa5 && status2 == 0x5a)
+		up->port.type = PORT_16450;
+}
+
+static int broken_efr(struct uart_8250_port *up)
+{
+	/*
+	 * Exar ST16C2550 "A2" devices incorrectly detect as
+	 * having an EFR, and report an ID of 0x0201.  See
+	 * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf
+	 */
+	if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
+		return 1;
+
+	return 0;
+}
+
+/*
+ * We know that the chip has FIFOs.  Does it have an EFR?  The
+ * EFR is located in the same register position as the IIR and
+ * we know the top two bits of the IIR are currently set.  The
+ * EFR should contain zero.  Try to read the EFR.
+ */
+static void autoconfig_16550a(struct uart_8250_port *up)
+{
+	unsigned char status1, status2;
+	unsigned int iersave;
+
+	up->port.type = PORT_16550A;
+	up->capabilities |= UART_CAP_FIFO;
+
+	/*
+	 * Check for presence of the EFR when DLAB is set.
+	 * Only ST16C650V1 UARTs pass this test.
+	 */
+	serial_outp(up, UART_LCR, UART_LCR_DLAB);
+	if (serial_in(up, UART_EFR) == 0) {
+		serial_outp(up, UART_EFR, 0xA8);
+		if (serial_in(up, UART_EFR) != 0) {
+			DEBUG_AUTOCONF("EFRv1 ");
+			up->port.type = PORT_16650;
+			up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
+		} else {
+			DEBUG_AUTOCONF("Motorola 8xxx DUART ");
+		}
+		serial_outp(up, UART_EFR, 0);
+		return;
+	}
+
+	/*
+	 * Maybe it requires 0xbf to be written to the LCR.
+	 * (other ST16C650V2 UARTs, TI16C752A, etc)
+	 */
+	serial_outp(up, UART_LCR, 0xBF);
+	if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) {
+		DEBUG_AUTOCONF("EFRv2 ");
+		autoconfig_has_efr(up);
+		return;
+	}
+
+	/*
+	 * Check for a National Semiconductor SuperIO chip.
+	 * Attempt to switch to bank 2, read the value of the LOOP bit
+	 * from EXCR1. Switch back to bank 0, change it in MCR. Then
+	 * switch back to bank 2, read it from EXCR1 again and check
+	 * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2
+	 */
+	serial_outp(up, UART_LCR, 0);
+	status1 = serial_in(up, UART_MCR);
+	serial_outp(up, UART_LCR, 0xE0);
+	status2 = serial_in(up, 0x02); /* EXCR1 */
+
+	if (!((status2 ^ status1) & UART_MCR_LOOP)) {
+		serial_outp(up, UART_LCR, 0);
+		serial_outp(up, UART_MCR, status1 ^ UART_MCR_LOOP);
+		serial_outp(up, UART_LCR, 0xE0);
+		status2 = serial_in(up, 0x02); /* EXCR1 */
+		serial_outp(up, UART_LCR, 0);
+		serial_outp(up, UART_MCR, status1);
+
+		if ((status2 ^ status1) & UART_MCR_LOOP) {
+			unsigned short quot;
+
+			serial_outp(up, UART_LCR, 0xE0);
+
+			quot = serial_dl_read(up);
+			quot <<= 3;
+
+			status1 = serial_in(up, 0x04); /* EXCR1 */
+			status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
+			status1 |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
+			serial_outp(up, 0x04, status1);
+			
+			serial_dl_write(up, quot);
+
+			serial_outp(up, UART_LCR, 0);
+
+			up->port.uartclk = 921600*16;
+			up->port.type = PORT_NS16550A;
+			up->capabilities |= UART_NATSEMI;
+			return;
+		}
+	}
+
+	/*
+	 * No EFR.  Try to detect a TI16750, which only sets bit 5 of
+	 * the IIR when 64 byte FIFO mode is enabled when DLAB is set.
+	 * Try setting it with and without DLAB set.  Cheap clones
+	 * set bit 5 without DLAB set.
+	 */
+	serial_outp(up, UART_LCR, 0);
+	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
+	status1 = serial_in(up, UART_IIR) >> 5;
+	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+	serial_outp(up, UART_LCR, UART_LCR_DLAB);
+	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
+	status2 = serial_in(up, UART_IIR) >> 5;
+	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+	serial_outp(up, UART_LCR, 0);
+
+	DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2);
+
+	if (status1 == 6 && status2 == 7) {
+		up->port.type = PORT_16750;
+		up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP;
+		return;
+	}
+
+	/*
+	 * Try writing and reading the UART_IER_UUE bit (b6).
+	 * If it works, this is probably one of the Xscale platform's
+	 * internal UARTs.
+	 * We're going to explicitly set the UUE bit to 0 before
+	 * trying to write and read a 1 just to make sure it's not
+	 * already a 1 and maybe locked there before we even start start.
+	 */
+	iersave = serial_in(up, UART_IER);
+	serial_outp(up, UART_IER, iersave & ~UART_IER_UUE);
+	if (!(serial_in(up, UART_IER) & UART_IER_UUE)) {
+		/*
+		 * OK it's in a known zero state, try writing and reading
+		 * without disturbing the current state of the other bits.
+		 */
+		serial_outp(up, UART_IER, iersave | UART_IER_UUE);
+		if (serial_in(up, UART_IER) & UART_IER_UUE) {
+			/*
+			 * It's an Xscale.
+			 * We'll leave the UART_IER_UUE bit set to 1 (enabled).
+			 */
+			DEBUG_AUTOCONF("Xscale ");
+			up->port.type = PORT_XSCALE;
+			up->capabilities |= UART_CAP_UUE;
+			return;
+		}
+	} else {
+		/*
+		 * If we got here we couldn't force the IER_UUE bit to 0.
+		 * Log it and continue.
+		 */
+		DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 ");
+	}
+	serial_outp(up, UART_IER, iersave);
+}
+
+/*
+ * This routine is called by rs_init() to initialize a specific serial
+ * port.  It determines what type of UART chip this serial port is
+ * using: 8250, 16450, 16550, 16550A.  The important question is
+ * whether or not this UART is a 16550A or not, since this will
+ * determine whether or not we can use its FIFO features or not.
+ */
+static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
+{
+	unsigned char status1, scratch, scratch2, scratch3;
+	unsigned char save_lcr, save_mcr;
+	unsigned long flags;
+
+	if (!up->port.iobase && !up->port.mapbase && !up->port.membase)
+		return;
+
+	DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ",
+			up->port.line, up->port.iobase, up->port.membase);
+
+	/*
+	 * We really do need global IRQs disabled here - we're going to
+	 * be frobbing the chips IRQ enable register to see if it exists.
+	 */
+	spin_lock_irqsave(&up->port.lock, flags);
+//	save_flags(flags); cli();
+
+	up->capabilities = 0;
+	up->bugs = 0;
+
+	if (!(up->port.flags & UPF_BUGGY_UART)) {
+		/*
+		 * Do a simple existence test first; if we fail this,
+		 * there's no point trying anything else.
+		 * 
+		 * 0x80 is used as a nonsense port to prevent against
+		 * false positives due to ISA bus float.  The
+		 * assumption is that 0x80 is a non-existent port;
+		 * which should be safe since include/asm/io.h also
+		 * makes this assumption.
+		 *
+		 * Note: this is safe as long as MCR bit 4 is clear
+		 * and the device is in "PC" mode.
+		 */
+		scratch = serial_inp(up, UART_IER);
+		serial_outp(up, UART_IER, 0);
+#ifdef __i386__
+		outb(0xff, 0x080);
+#endif
+		/*
+		 * Mask out IER[7:4] bits for test as some UARTs (e.g. TL
+		 * 16C754B) allow only to modify them if an EFR bit is set.
+		 */
+		scratch2 = serial_inp(up, UART_IER) & 0x0f;
+		serial_outp(up, UART_IER, 0x0F);
+#ifdef __i386__
+		outb(0, 0x080);
+#endif
+		scratch3 = serial_inp(up, UART_IER) & 0x0f;
+		serial_outp(up, UART_IER, scratch);
+		if (scratch2 != 0 || scratch3 != 0x0F) {
+			/*
+			 * We failed; there's nothing here
+			 */
+			DEBUG_AUTOCONF("IER test failed (%02x, %02x) ",
+				       scratch2, scratch3);
+			goto out;
+		}
+	}
+
+	save_mcr = serial_in(up, UART_MCR);
+	save_lcr = serial_in(up, UART_LCR);
+
+	/* 
+	 * Check to see if a UART is really there.  Certain broken
+	 * internal modems based on the Rockwell chipset fail this
+	 * test, because they apparently don't implement the loopback
+	 * test mode.  So this test is skipped on the COM 1 through
+	 * COM 4 ports.  This *should* be safe, since no board
+	 * manufacturer would be stupid enough to design a board
+	 * that conflicts with COM 1-4 --- we hope!
+	 */
+	if (!(up->port.flags & UPF_SKIP_TEST)) {
+		serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
+		status1 = serial_inp(up, UART_MSR) & 0xF0;
+		serial_outp(up, UART_MCR, save_mcr);
+		if (status1 != 0x90) {
+			DEBUG_AUTOCONF("LOOP test failed (%02x) ",
+				       status1);
+			goto out;
+		}
+	}
+
+	/*
+	 * We're pretty sure there's a port here.  Lets find out what
+	 * type of port it is.  The IIR top two bits allows us to find
+	 * out if it's 8250 or 16450, 16550, 16550A or later.  This
+	 * determines what we test for next.
+	 *
+	 * We also initialise the EFR (if any) to zero for later.  The
+	 * EFR occupies the same register location as the FCR and IIR.
+	 */
+	serial_outp(up, UART_LCR, 0xBF);
+	serial_outp(up, UART_EFR, 0);
+	serial_outp(up, UART_LCR, 0);
+
+	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+	scratch = serial_in(up, UART_IIR) >> 6;
+
+	DEBUG_AUTOCONF("iir=%d ", scratch);
+
+	switch (scratch) {
+	case 0:
+		autoconfig_8250(up);
+		break;
+	case 1:
+		up->port.type = PORT_UNKNOWN;
+		break;
+	case 2:
+		up->port.type = PORT_16550;
+		break;
+	case 3:
+		autoconfig_16550a(up);
+		break;
+	}
+
+#ifdef CONFIG_SERIAL_8250_RSA
+	/*
+	 * Only probe for RSA ports if we got the region.
+	 */
+	if (up->port.type == PORT_16550A && probeflags & PROBE_RSA) {
+		int i;
+
+		for (i = 0 ; i < probe_rsa_count; ++i) {
+			if (probe_rsa[i] == up->port.iobase &&
+			    __enable_rsa(up)) {
+				up->port.type = PORT_RSA;
+				break;
+			}
+		}
+	}
+#endif
+
+#ifdef CONFIG_SERIAL_8250_AU1X00
+	/* if access method is AU, it is a 16550 with a quirk */
+	if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
+		up->bugs |= UART_BUG_NOMSR;
+#endif
+
+	serial_outp(up, UART_LCR, save_lcr);
+
+	if (up->capabilities != uart_config[up->port.type].flags) {
+		printk(KERN_WARNING
+		       "ttyS%d: detected caps %08x should be %08x\n",
+			up->port.line, up->capabilities,
+			uart_config[up->port.type].flags);
+	}
+
+	up->port.fifosize = uart_config[up->port.type].fifo_size;
+	up->capabilities = uart_config[up->port.type].flags;
+	up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
+
+	if (up->port.type == PORT_UNKNOWN)
+		goto out;
+
+	/*
+	 * Reset the UART.
+	 */
+#ifdef CONFIG_SERIAL_8250_RSA
+	if (up->port.type == PORT_RSA)
+		serial_outp(up, UART_RSA_FRR, 0);
+#endif
+	serial_outp(up, UART_MCR, save_mcr);
+	serial8250_clear_fifos(up);
+	serial_in(up, UART_RX);
+	if (up->capabilities & UART_CAP_UUE)
+		serial_outp(up, UART_IER, UART_IER_UUE);
+	else
+		serial_outp(up, UART_IER, 0);
+
+ out:	
+	spin_unlock_irqrestore(&up->port.lock, flags);
+//	restore_flags(flags);
+	DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name);
+}
+
+static void autoconfig_irq(struct uart_8250_port *up)
+{
+	unsigned char save_mcr, save_ier;
+	unsigned char save_ICP = 0;
+	unsigned int ICP = 0;
+	unsigned long irqs;
+	int irq;
+
+	if (up->port.flags & UPF_FOURPORT) {
+		ICP = (up->port.iobase & 0xfe0) | 0x1f;
+		save_ICP = inb_p(ICP);
+		outb_p(0x80, ICP);
+		(void) inb_p(ICP);
+	}
+
+	/* forget possible initially masked and pending IRQ */
+	probe_irq_off(probe_irq_on());
+	save_mcr = serial_inp(up, UART_MCR);
+	save_ier = serial_inp(up, UART_IER);
+	serial_outp(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2);
+	
+	irqs = probe_irq_on();
+	serial_outp(up, UART_MCR, 0);
+	udelay (10);
+	if (up->port.flags & UPF_FOURPORT)  {
+		serial_outp(up, UART_MCR,
+			    UART_MCR_DTR | UART_MCR_RTS);
+	} else {
+		serial_outp(up, UART_MCR,
+			    UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
+	}
+	serial_outp(up, UART_IER, 0x0f);	/* enable all intrs */
+	(void)serial_inp(up, UART_LSR);
+	(void)serial_inp(up, UART_RX);
+	(void)serial_inp(up, UART_IIR);
+	(void)serial_inp(up, UART_MSR);
+	serial_outp(up, UART_TX, 0xFF);
+	udelay (20);
+	irq = probe_irq_off(irqs);
+
+	serial_outp(up, UART_MCR, save_mcr);
+	serial_outp(up, UART_IER, save_ier);
+
+	if (up->port.flags & UPF_FOURPORT)
+		outb_p(save_ICP, ICP);
+
+	up->port.irq = (irq > 0) ? irq : 0;
+}
+
+static inline void __stop_tx(struct uart_8250_port *p)
+{
+	if (p->ier & UART_IER_THRI) {
+		p->ier &= ~UART_IER_THRI;
+		serial_out(p, UART_IER, p->ier);
+	}
+}
+
+static void serial8250_stop_tx(struct uart_port *port)
+{
+	struct uart_8250_port *up = (struct uart_8250_port *)port;
+
+	__stop_tx(up);
+
+	/*
+	 * We really want to stop the transmitter from sending.
+	 */
+	if (up->port.type == PORT_16C950) {
+		up->acr |= UART_ACR_TXDIS;
+		serial_icr_write(up, UART_ACR, up->acr);
+	}
+}
+
+static void transmit_chars(struct uart_8250_port *up);
+
+static void serial8250_start_tx(struct uart_port *port)
+{
+	struct uart_8250_port *up = (struct uart_8250_port *)port;
+
+	if (!(up->ier & UART_IER_THRI)) {
+		up->ier |= UART_IER_THRI;
+		serial_out(up, UART_IER, up->ier);
+
+		if (up->bugs & UART_BUG_TXEN) {
+			unsigned char lsr, iir;
+			lsr = serial_in(up, UART_LSR);
+			iir = serial_in(up, UART_IIR);
+			if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT)
+				transmit_chars(up);
+		}
+	}
+
+	/*
+	 * Re-enable the transmitter if we disabled it.
+	 */
+	if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
+		up->acr &= ~UART_ACR_TXDIS;
+		serial_icr_write(up, UART_ACR, up->acr);
+	}
+}
+
+static void serial8250_stop_rx(struct uart_port *port)
+{
+	struct uart_8250_port *up = (struct uart_8250_port *)port;
+
+	up->ier &= ~UART_IER_RLSI;
+	up->port.read_status_mask &= ~UART_LSR_DR;
+	serial_out(up, UART_IER, up->ier);
+}
+
+static void serial8250_enable_ms(struct uart_port *port)
+{
+	struct uart_8250_port *up = (struct uart_8250_port *)port;
+
+	/* no MSR capabilities */
+	if (up->bugs & UART_BUG_NOMSR)
+		return;
+
+	up->ier |= UART_IER_MSI;
+	serial_out(up, UART_IER, up->ier);
+}
+
+static void
+receive_chars(struct uart_8250_port *up, unsigned int *status)
+{
+	struct tty_struct *tty = up->port.info->tty;
+	unsigned char ch, lsr = *status;
+	int max_count = 256;
+	char flag;
+
+	do {
+		ch = serial_inp(up, UART_RX);
+		flag = TTY_NORMAL;
+		up->port.icount.rx++;
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+		/*
+		 * Recover the break flag from console xmit
+		 */
+		if (up->port.line == up->port.cons->index) {
+			lsr |= up->lsr_break_flag;
+			up->lsr_break_flag = 0;
+		}
+#endif
+
+		if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE |
+				    UART_LSR_FE | UART_LSR_OE))) {
+			/*
+			 * For statistics only
+			 */
+			if (lsr & UART_LSR_BI) {
+				lsr &= ~(UART_LSR_FE | UART_LSR_PE);
+				up->port.icount.brk++;
+				/*
+				 * We do the SysRQ and SAK checking
+				 * here because otherwise the break
+				 * may get masked by ignore_status_mask
+				 * or read_status_mask.
+				 */
+				if (uart_handle_break(&up->port))
+					goto ignore_char;
+			} else if (lsr & UART_LSR_PE)
+				up->port.icount.parity++;
+			else if (lsr & UART_LSR_FE)
+				up->port.icount.frame++;
+			if (lsr & UART_LSR_OE)
+				up->port.icount.overrun++;
+
+			/*
+			 * Mask off conditions which should be ignored.
+			 */
+			lsr &= up->port.read_status_mask;
+
+			if (lsr & UART_LSR_BI) {
+				DEBUG_INTR("handling break....");
+				flag = TTY_BREAK;
+			} else if (lsr & UART_LSR_PE)
+				flag = TTY_PARITY;
+			else if (lsr & UART_LSR_FE)
+				flag = TTY_FRAME;
+		}
+		if (uart_handle_sysrq_char(&up->port, ch))
+			goto ignore_char;
+
+		uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
+
+	ignore_char:
+		lsr = serial_inp(up, UART_LSR);
+	} while ((lsr & UART_LSR_DR) && (max_count-- > 0));
+	spin_unlock(&up->port.lock);
+	tty_flip_buffer_push(tty);
+	spin_lock(&up->port.lock);
+	*status = lsr;
+}
+
+static void transmit_chars(struct uart_8250_port *up)
+{
+	struct circ_buf *xmit = &up->port.info->xmit;
+	int count;
+
+	if (up->port.x_char) {
+		serial_outp(up, UART_TX, up->port.x_char);
+		up->port.icount.tx++;
+		up->port.x_char = 0;
+		return;
+	}
+	if (uart_tx_stopped(&up->port)) {
+		serial8250_stop_tx(&up->port);
+		return;
+	}
+	if (uart_circ_empty(xmit)) {
+		__stop_tx(up);
+		return;
+	}
+
+	count = up->tx_loadsz;
+	do {
+		serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		up->port.icount.tx++;
+		if (uart_circ_empty(xmit))
+			break;
+	} while (--count > 0);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(&up->port);
+
+	DEBUG_INTR("THRE...");
+
+	if (uart_circ_empty(xmit))
+		__stop_tx(up);
+}
+
+static unsigned int check_modem_status(struct uart_8250_port *up)
+{
+	unsigned int status = serial_in(up, UART_MSR);
+
+	if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
+	    up->port.info != NULL) {
+		if (status & UART_MSR_TERI)
+			up->port.icount.rng++;
+		if (status & UART_MSR_DDSR)
+			up->port.icount.dsr++;
+		if (status & UART_MSR_DDCD)
+			uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
+		if (status & UART_MSR_DCTS)
+			uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
+
+		wake_up_interruptible(&up->port.info->delta_msr_wait);
+	}
+
+	return status;
+}
+
+/*
+ * This handles the interrupt from one port.
+ */
+static inline void
+serial8250_handle_port(struct uart_8250_port *up)
+{
+	unsigned int status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&up->port.lock, flags);
+
+	status = serial_inp(up, UART_LSR);
+
+	DEBUG_INTR("status = %x...", status);
+
+	if (status & UART_LSR_DR)
+		receive_chars(up, &status);
+	check_modem_status(up);
+	if (status & UART_LSR_THRE)
+		transmit_chars(up);
+
+	spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+/*
+ * This is the serial driver's interrupt routine.
+ *
+ * Arjan thinks the old way was overly complex, so it got simplified.
+ * Alan disagrees, saying that need the complexity to handle the weird
+ * nature of ISA shared interrupts.  (This is a special exception.)
+ *
+ * In order to handle ISA shared interrupts properly, we need to check
+ * that all ports have been serviced, and therefore the ISA interrupt
+ * line has been de-asserted.
+ *
+ * This means we need to loop through all ports. checking that they
+ * don't have an interrupt pending.
+ */
+static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
+{
+	struct irq_info *i = dev_id;
+	struct list_head *l, *end = NULL;
+	int pass_counter = 0, handled = 0;
+
+	DEBUG_INTR("serial8250_interrupt(%d)...", irq);
+
+	spin_lock(&i->lock);
+
+	l = i->head;
+	do {
+		struct uart_8250_port *up;
+		unsigned int iir;
+
+		up = list_entry(l, struct uart_8250_port, list);
+
+		iir = serial_in(up, UART_IIR);
+		if (!(iir & UART_IIR_NO_INT)) {
+			serial8250_handle_port(up);
+
+			handled = 1;
+
+			end = NULL;
+		} else if (end == NULL)
+			end = l;
+
+		l = l->next;
+
+		if (l == i->head && pass_counter++ > PASS_LIMIT) {
+			/* If we hit this, we're dead. */
+			printk(KERN_ERR "serial8250: too much work for "
+				"irq%d\n", irq);
+			break;
+		}
+	} while (l != end);
+
+	spin_unlock(&i->lock);
+
+	DEBUG_INTR("end.\n");
+
+	return IRQ_RETVAL(handled);
+}
+
+/*
+ * To support ISA shared interrupts, we need to have one interrupt
+ * handler that ensures that the IRQ line has been deasserted
+ * before returning.  Failing to do this will result in the IRQ
+ * line being stuck active, and, since ISA irqs are edge triggered,
+ * no more IRQs will be seen.
+ */
+static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up)
+{
+	spin_lock_irq(&i->lock);
+
+	if (!list_empty(i->head)) {
+		if (i->head == &up->list)
+			i->head = i->head->next;
+		list_del(&up->list);
+	} else {
+		BUG_ON(i->head != &up->list);
+		i->head = NULL;
+	}
+
+	spin_unlock_irq(&i->lock);
+}
+
+static int serial_link_irq_chain(struct uart_8250_port *up)
+{
+	struct irq_info *i = irq_lists + up->port.irq;
+	int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
+
+	spin_lock_irq(&i->lock);
+
+	if (i->head) {
+		list_add(&up->list, i->head);
+		spin_unlock_irq(&i->lock);
+
+		ret = 0;
+	} else {
+		INIT_LIST_HEAD(&up->list);
+		i->head = &up->list;
+		spin_unlock_irq(&i->lock);
+
+		ret = request_irq(up->port.irq, serial8250_interrupt,
+				  irq_flags, "serial", i);
+		if (ret < 0)
+			serial_do_unlink(i, up);
+	}
+
+	return ret;
+}
+
+static void serial_unlink_irq_chain(struct uart_8250_port *up)
+{
+	struct irq_info *i = irq_lists + up->port.irq;
+
+	BUG_ON(i->head == NULL);
+
+	if (list_empty(i->head))
+		free_irq(up->port.irq, i);
+
+	serial_do_unlink(i, up);
+}
+
+/* Base timer interval for polling */
+static inline int poll_timeout(int timeout)
+{
+	return timeout > 6 ? (timeout / 2 - 2) : 1;
+}
+
+/*
+ * This function is used to handle ports that do not have an
+ * interrupt.  This doesn't work very well for 16450's, but gives
+ * barely passable results for a 16550A.  (Although at the expense
+ * of much CPU overhead).
+ */
+static void serial8250_timeout(unsigned long data)
+{
+	struct uart_8250_port *up = (struct uart_8250_port *)data;
+	unsigned int iir;
+
+	iir = serial_in(up, UART_IIR);
+	if (!(iir & UART_IIR_NO_INT))
+		serial8250_handle_port(up);
+	mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout));
+}
+
+static void serial8250_backup_timeout(unsigned long data)
+{
+	struct uart_8250_port *up = (struct uart_8250_port *)data;
+	unsigned int iir, ier = 0;
+
+	/*
+	 * Must disable interrupts or else we risk racing with the interrupt
+	 * based handler.
+	 */
+	if (is_real_interrupt(up->port.irq)) {
+		ier = serial_in(up, UART_IER);
+		serial_out(up, UART_IER, 0);
+	}
+
+	iir = serial_in(up, UART_IIR);
+
+	/*
+	 * This should be a safe test for anyone who doesn't trust the
+	 * IIR bits on their UART, but it's specifically designed for
+	 * the "Diva" UART used on the management processor on many HP
+	 * ia64 and parisc boxes.
+	 */
+	if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
+	    (!uart_circ_empty(&up->port.info->xmit) || up->port.x_char) &&
+	    (serial_in(up, UART_LSR) & UART_LSR_THRE)) {
+		iir &= ~(UART_IIR_ID | UART_IIR_NO_INT);
+		iir |= UART_IIR_THRI;
+	}
+
+	if (!(iir & UART_IIR_NO_INT))
+		serial8250_handle_port(up);
+
+	if (is_real_interrupt(up->port.irq))
+		serial_out(up, UART_IER, ier);
+
+	/* Standard timer interval plus 0.2s to keep the port running */
+	mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout) + HZ/5);
+}
+
+static unsigned int serial8250_tx_empty(struct uart_port *port)
+{
+	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	unsigned long flags;
+	unsigned int ret;
+
+	spin_lock_irqsave(&up->port.lock, flags);
+	ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+	spin_unlock_irqrestore(&up->port.lock, flags);
+
+	return ret;
+}
+
+static unsigned int serial8250_get_mctrl(struct uart_port *port)
+{
+	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	unsigned int status;
+	unsigned int ret;
+
+	status = check_modem_status(up);
+
+	ret = 0;
+	if (status & UART_MSR_DCD)
+		ret |= TIOCM_CAR;
+	if (status & UART_MSR_RI)
+		ret |= TIOCM_RNG;
+	if (status & UART_MSR_DSR)
+		ret |= TIOCM_DSR;
+	if (status & UART_MSR_CTS)
+		ret |= TIOCM_CTS;
+	return ret;
+}
+
+static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	unsigned char mcr = 0;
+
+	if (mctrl & TIOCM_RTS)
+		mcr |= UART_MCR_RTS;
+	if (mctrl & TIOCM_DTR)
+		mcr |= UART_MCR_DTR;
+	if (mctrl & TIOCM_OUT1)
+		mcr |= UART_MCR_OUT1;
+	if (mctrl & TIOCM_OUT2)
+		mcr |= UART_MCR_OUT2;
+	if (mctrl & TIOCM_LOOP)
+		mcr |= UART_MCR_LOOP;
+
+	mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
+
+	serial_out(up, UART_MCR, mcr);
+}
+
+static void serial8250_break_ctl(struct uart_port *port, int break_state)
+{
+	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	unsigned long flags;
+
+	spin_lock_irqsave(&up->port.lock, flags);
+	if (break_state == -1)
+		up->lcr |= UART_LCR_SBC;
+	else
+		up->lcr &= ~UART_LCR_SBC;
+	serial_out(up, UART_LCR, up->lcr);
+	spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+/*
+ *	Wait for transmitter & holding register to empty
+ */
+static inline void wait_for_xmitr(struct uart_8250_port *up, int bits)
+{
+	unsigned int status, tmout = 10000;
+
+	/* Wait up to 10ms for the character(s) to be sent. */
+	do {
+		status = serial_in(up, UART_LSR);
+
+		if (status & UART_LSR_BI)
+			up->lsr_break_flag = UART_LSR_BI;
+
+		if (--tmout == 0)
+			break;
+		udelay(1);
+	} while ((status & bits) != bits);
+
+	/* Wait up to 1s for flow control if necessary */
+	if (up->port.flags & UPF_CONS_FLOW) {
+		tmout = 1000000;
+		while (!(serial_in(up, UART_MSR) & UART_MSR_CTS) && --tmout) {
+			udelay(1);
+			touch_nmi_watchdog();
+		}
+	}
+}
+
+static int serial8250_startup(struct uart_port *port)
+{
+	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	unsigned long flags;
+	unsigned char lsr, iir;
+	int retval;
+
+	up->capabilities = uart_config[up->port.type].flags;
+	up->mcr = 0;
+
+	if (up->port.type == PORT_16C950) {
+		/* Wake up and initialize UART */
+		up->acr = 0;
+		serial_outp(up, UART_LCR, 0xBF);
+		serial_outp(up, UART_EFR, UART_EFR_ECB);
+		serial_outp(up, UART_IER, 0);
+		serial_outp(up, UART_LCR, 0);
+		serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
+		serial_outp(up, UART_LCR, 0xBF);
+		serial_outp(up, UART_EFR, UART_EFR_ECB);
+		serial_outp(up, UART_LCR, 0);
+	}
+
+#ifdef CONFIG_SERIAL_8250_RSA
+	/*
+	 * If this is an RSA port, see if we can kick it up to the
+	 * higher speed clock.
+	 */
+	enable_rsa(up);
+#endif
+
+	/*
+	 * Clear the FIFO buffers and disable them.
+	 * (they will be reenabled in set_termios())
+	 */
+	serial8250_clear_fifos(up);
+
+	/*
+	 * Clear the interrupt registers.
+	 */
+	(void) serial_inp(up, UART_LSR);
+	(void) serial_inp(up, UART_RX);
+	(void) serial_inp(up, UART_IIR);
+	(void) serial_inp(up, UART_MSR);
+
+	/*
+	 * At this point, there's no way the LSR could still be 0xff;
+	 * if it is, then bail out, because there's likely no UART
+	 * here.
+	 */
+	if (!(up->port.flags & UPF_BUGGY_UART) &&
+	    (serial_inp(up, UART_LSR) == 0xff)) {
+		printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
+		return -ENODEV;
+	}
+
+	/*
+	 * For a XR16C850, we need to set the trigger levels
+	 */
+	if (up->port.type == PORT_16850) {
+		unsigned char fctr;
+
+		serial_outp(up, UART_LCR, 0xbf);
+
+		fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX);
+		serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX);
+		serial_outp(up, UART_TRG, UART_TRG_96);
+		serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_TX);
+		serial_outp(up, UART_TRG, UART_TRG_96);
+
+		serial_outp(up, UART_LCR, 0);
+	}
+
+	if (is_real_interrupt(up->port.irq)) {
+		/*
+		 * Test for UARTs that do not reassert THRE when the
+		 * transmitter is idle and the interrupt has already
+		 * been cleared.  Real 16550s should always reassert
+		 * this interrupt whenever the transmitter is idle and
+		 * the interrupt is enabled.  Delays are necessary to
+		 * allow register changes to become visible.
+		 */
+		spin_lock_irqsave(&up->port.lock, flags);
+
+		wait_for_xmitr(up, UART_LSR_THRE);
+		serial_out_sync(up, UART_IER, UART_IER_THRI);
+		udelay(1); /* allow THRE to set */
+		serial_in(up, UART_IIR);
+		serial_out(up, UART_IER, 0);
+		serial_out_sync(up, UART_IER, UART_IER_THRI);
+		udelay(1); /* allow a working UART time to re-assert THRE */
+		iir = serial_in(up, UART_IIR);
+		serial_out(up, UART_IER, 0);
+
+		spin_unlock_irqrestore(&up->port.lock, flags);
+
+		/*
+		 * If the interrupt is not reasserted, setup a timer to
+		 * kick the UART on a regular basis.
+		 */
+		if (iir & UART_IIR_NO_INT) {
+			pr_debug("ttyS%d - using backup timer\n", port->line);
+			up->timer.function = serial8250_backup_timeout;
+			up->timer.data = (unsigned long)up;
+			mod_timer(&up->timer, jiffies +
+			          poll_timeout(up->port.timeout) + HZ/5);
+		}
+	}
+
+	/*
+	 * If the "interrupt" for this port doesn't correspond with any
+	 * hardware interrupt, we use a timer-based system.  The original
+	 * driver used to do this with IRQ0.
+	 */
+	if (!is_real_interrupt(up->port.irq)) {
+		up->timer.data = (unsigned long)up;
+		mod_timer(&up->timer, jiffies + poll_timeout(up->port.timeout));
+	} else {
+		retval = serial_link_irq_chain(up);
+		if (retval)
+			return retval;
+	}
+
+	/*
+	 * Now, initialize the UART
+	 */
+	serial_outp(up, UART_LCR, UART_LCR_WLEN8);
+
+	spin_lock_irqsave(&up->port.lock, flags);
+	if (up->port.flags & UPF_FOURPORT) {
+		if (!is_real_interrupt(up->port.irq))
+			up->port.mctrl |= TIOCM_OUT1;
+	} else
+		/*
+		 * Most PC uarts need OUT2 raised to enable interrupts.
+		 */
+		if (is_real_interrupt(up->port.irq))
+			up->port.mctrl |= TIOCM_OUT2;
+
+	serial8250_set_mctrl(&up->port, up->port.mctrl);
+
+	/*
+	 * Do a quick test to see if we receive an
+	 * interrupt when we enable the TX irq.
+	 */
+	serial_outp(up, UART_IER, UART_IER_THRI);
+	lsr = serial_in(up, UART_LSR);
+	iir = serial_in(up, UART_IIR);
+	serial_outp(up, UART_IER, 0);
+
+	if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) {
+		if (!(up->bugs & UART_BUG_TXEN)) {
+			up->bugs |= UART_BUG_TXEN;
+			pr_debug("ttyS%d - enabling bad tx status workarounds\n",
+				 port->line);
+		}
+	} else {
+		up->bugs &= ~UART_BUG_TXEN;
+	}
+
+	spin_unlock_irqrestore(&up->port.lock, flags);
+
+	/*
+	 * Finally, enable interrupts.  Note: Modem status interrupts
+	 * are set via set_termios(), which will be occurring imminently
+	 * anyway, so we don't enable them here.
+	 */
+	up->ier = UART_IER_RLSI | UART_IER_RDI;
+	serial_outp(up, UART_IER, up->ier);
+
+	if (up->port.flags & UPF_FOURPORT) {
+		unsigned int icp;
+		/*
+		 * Enable interrupts on the AST Fourport board
+		 */
+		icp = (up->port.iobase & 0xfe0) | 0x01f;
+		outb_p(0x80, icp);
+		(void) inb_p(icp);
+	}
+
+	/*
+	 * And clear the interrupt registers again for luck.
+	 */
+	(void) serial_inp(up, UART_LSR);
+	(void) serial_inp(up, UART_RX);
+	(void) serial_inp(up, UART_IIR);
+	(void) serial_inp(up, UART_MSR);
+
+	return 0;
+}
+
+static void serial8250_shutdown(struct uart_port *port)
+{
+	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	unsigned long flags;
+
+	/*
+	 * Disable interrupts from this port
+	 */
+	up->ier = 0;
+	serial_outp(up, UART_IER, 0);
+
+	spin_lock_irqsave(&up->port.lock, flags);
+	if (up->port.flags & UPF_FOURPORT) {
+		/* reset interrupts on the AST Fourport board */
+		inb((up->port.iobase & 0xfe0) | 0x1f);
+		up->port.mctrl |= TIOCM_OUT1;
+	} else
+		up->port.mctrl &= ~TIOCM_OUT2;
+
+	serial8250_set_mctrl(&up->port, up->port.mctrl);
+	spin_unlock_irqrestore(&up->port.lock, flags);
+
+	/*
+	 * Disable break condition and FIFOs
+	 */
+	serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
+	serial8250_clear_fifos(up);
+
+#ifdef CONFIG_SERIAL_8250_RSA
+	/*
+	 * Reset the RSA board back to 115kbps compat mode.
+	 */
+	disable_rsa(up);
+#endif
+
+	/*
+	 * Read data port to reset things, and then unlink from
+	 * the IRQ chain.
+	 */
+	(void) serial_in(up, UART_RX);
+
+	del_timer_sync(&up->timer);
+	up->timer.function = serial8250_timeout;
+	if (is_real_interrupt(up->port.irq))
+		serial_unlink_irq_chain(up);
+}
+
+static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
+{
+	unsigned int quot;
+
+	/*
+	 * Handle magic divisors for baud rates above baud_base on
+	 * SMSC SuperIO chips.
+	 */
+	if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+	    baud == (port->uartclk/4))
+		quot = 0x8001;
+	else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+		 baud == (port->uartclk/8))
+		quot = 0x8002;
+	else
+		quot = uart_get_divisor(port, baud);
+
+	return quot;
+}
+
+static void
+serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
+		       struct ktermios *old)
+{
+	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	unsigned char cval, fcr = 0;
+	unsigned long flags;
+	unsigned int baud, quot;
+
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		cval = UART_LCR_WLEN5;
+		break;
+	case CS6:
+		cval = UART_LCR_WLEN6;
+		break;
+	case CS7:
+		cval = UART_LCR_WLEN7;
+		break;
+	default:
+	case CS8:
+		cval = UART_LCR_WLEN8;
+		break;
+	}
+
+	if (termios->c_cflag & CSTOPB)
+		cval |= UART_LCR_STOP;
+	if (termios->c_cflag & PARENB)
+		cval |= UART_LCR_PARITY;
+	if (!(termios->c_cflag & PARODD))
+		cval |= UART_LCR_EPAR;
+#ifdef CMSPAR
+	if (termios->c_cflag & CMSPAR)
+		cval |= UART_LCR_SPAR;
+#endif
+
+	/*
+	 * Ask the core to calculate the divisor for us.
+	 */
+	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 
+	quot = serial8250_get_divisor(port, baud);
+
+	/*
+	 * Oxford Semi 952 rev B workaround
+	 */
+	if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0)
+		quot ++;
+
+	if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) {
+		if (baud < 2400)
+			fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
+		else
+			fcr = uart_config[up->port.type].fcr;
+	}
+
+	/*
+	 * MCR-based auto flow control.  When AFE is enabled, RTS will be
+	 * deasserted when the receive FIFO contains more characters than
+	 * the trigger, or the MCR RTS bit is cleared.  In the case where
+	 * the remote UART is not using CTS auto flow control, we must
+	 * have sufficient FIFO entries for the latency of the remote
+	 * UART to respond.  IOW, at least 32 bytes of FIFO.
+	 */
+	if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) {
+		up->mcr &= ~UART_MCR_AFE;
+		if (termios->c_cflag & CRTSCTS)
+			up->mcr |= UART_MCR_AFE;
+	}
+
+	/*
+	 * Ok, we're now changing the port state.  Do it with
+	 * interrupts disabled.
+	 */
+	spin_lock_irqsave(&up->port.lock, flags);
+
+	/*
+	 * Update the per-port timeout.
+	 */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+	if (termios->c_iflag & INPCK)
+		up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+	if (termios->c_iflag & (BRKINT | PARMRK))
+		up->port.read_status_mask |= UART_LSR_BI;
+
+	/*
+	 * Characteres to ignore
+	 */
+	up->port.ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+	if (termios->c_iflag & IGNBRK) {
+		up->port.ignore_status_mask |= UART_LSR_BI;
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns too (for real raw support).
+		 */
+		if (termios->c_iflag & IGNPAR)
+			up->port.ignore_status_mask |= UART_LSR_OE;
+	}
+
+	/*
+	 * ignore all characters if CREAD is not set
+	 */
+	if ((termios->c_cflag & CREAD) == 0)
+		up->port.ignore_status_mask |= UART_LSR_DR;
+
+	/*
+	 * CTS flow control flag and modem status interrupts
+	 */
+	up->ier &= ~UART_IER_MSI;
+	if (!(up->bugs & UART_BUG_NOMSR) &&
+			UART_ENABLE_MS(&up->port, termios->c_cflag))
+		up->ier |= UART_IER_MSI;
+	if (up->capabilities & UART_CAP_UUE)
+		up->ier |= UART_IER_UUE | UART_IER_RTOIE;
+
+	serial_out(up, UART_IER, up->ier);
+
+	if (up->capabilities & UART_CAP_EFR) {
+		unsigned char efr = 0;
+		/*
+		 * TI16C752/Startech hardware flow control.  FIXME:
+		 * - TI16C752 requires control thresholds to be set.
+		 * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled.
+		 */
+		if (termios->c_cflag & CRTSCTS)
+			efr |= UART_EFR_CTS;
+
+		serial_outp(up, UART_LCR, 0xBF);
+		serial_outp(up, UART_EFR, efr);
+	}
+
+#ifdef CONFIG_ARCH_OMAP15XX
+	/* Workaround to enable 115200 baud on OMAP1510 internal ports */
+	if (cpu_is_omap1510() && is_omap_port((unsigned int)up->port.membase)) {
+		if (baud == 115200) {
+			quot = 1;
+			serial_out(up, UART_OMAP_OSC_12M_SEL, 1);
+		} else
+			serial_out(up, UART_OMAP_OSC_12M_SEL, 0);
+	}
+#endif
+
+	if (up->capabilities & UART_NATSEMI) {
+		/* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */
+		serial_outp(up, UART_LCR, 0xe0);
+	} else {
+		serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
+	}
+
+	serial_dl_write(up, quot);
+
+	/*
+	 * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
+	 * is written without DLAB set, this mode will be disabled.
+	 */
+	if (up->port.type == PORT_16750)
+		serial_outp(up, UART_FCR, fcr);
+
+	serial_outp(up, UART_LCR, cval);		/* reset DLAB */
+	up->lcr = cval;					/* Save LCR */
+	if (up->port.type != PORT_16750) {
+		if (fcr & UART_FCR_ENABLE_FIFO) {
+			/* emulated UARTs (Lucent Venus 167x) need two steps */
+			serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+		}
+		serial_outp(up, UART_FCR, fcr);		/* set fcr */
+	}
+	serial8250_set_mctrl(&up->port, up->port.mctrl);
+	spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void
+serial8250_pm(struct uart_port *port, unsigned int state,
+	      unsigned int oldstate)
+{
+	struct uart_8250_port *p = (struct uart_8250_port *)port;
+
+	serial8250_set_sleep(p, state != 0);
+
+	if (p->pm)
+		p->pm(port, state, oldstate);
+}
+
+/*
+ * Resource handling.
+ */
+static int serial8250_request_std_resource(struct uart_8250_port *up)
+{
+	unsigned int size = 8 << up->port.regshift;
+	int ret = 0;
+
+	switch (up->port.iotype) {
+	case UPIO_AU:
+		size = 0x100000;
+		/* fall thru */
+	case UPIO_TSI:
+	case UPIO_MEM32:
+	case UPIO_MEM:
+		if (!up->port.mapbase)
+			break;
+
+		if (!request_mem_region(up->port.mapbase, size, "serial")) {
+			ret = -EBUSY;
+			break;
+		}
+
+		if (up->port.flags & UPF_IOREMAP) {
+			up->port.membase = ioremap(up->port.mapbase, size);
+			if (!up->port.membase) {
+				release_mem_region(up->port.mapbase, size);
+				ret = -ENOMEM;
+			}
+		}
+		break;
+
+	case UPIO_HUB6:
+	case UPIO_PORT:
+		if (!request_region(up->port.iobase, size, "serial"))
+			ret = -EBUSY;
+		break;
+	}
+	return ret;
+}
+
+static void serial8250_release_std_resource(struct uart_8250_port *up)
+{
+	unsigned int size = 8 << up->port.regshift;
+
+	switch (up->port.iotype) {
+	case UPIO_AU:
+		size = 0x100000;
+		/* fall thru */
+	case UPIO_TSI:
+	case UPIO_MEM32:
+	case UPIO_MEM:
+		if (!up->port.mapbase)
+			break;
+
+		if (up->port.flags & UPF_IOREMAP) {
+			iounmap(up->port.membase);
+			up->port.membase = NULL;
+		}
+
+		release_mem_region(up->port.mapbase, size);
+		break;
+
+	case UPIO_HUB6:
+	case UPIO_PORT:
+		release_region(up->port.iobase, size);
+		break;
+	}
+}
+
+static int serial8250_request_rsa_resource(struct uart_8250_port *up)
+{
+	unsigned long start = UART_RSA_BASE << up->port.regshift;
+	unsigned int size = 8 << up->port.regshift;
+	int ret = -EINVAL;
+
+	switch (up->port.iotype) {
+	case UPIO_HUB6:
+	case UPIO_PORT:
+		start += up->port.iobase;
+		if (request_region(start, size, "serial-rsa"))
+			ret = 0;
+		else
+			ret = -EBUSY;
+		break;
+	}
+
+	return ret;
+}
+
+static void serial8250_release_rsa_resource(struct uart_8250_port *up)
+{
+	unsigned long offset = UART_RSA_BASE << up->port.regshift;
+	unsigned int size = 8 << up->port.regshift;
+
+	switch (up->port.iotype) {
+	case UPIO_HUB6:
+	case UPIO_PORT:
+		release_region(up->port.iobase + offset, size);
+		break;
+	}
+}
+
+static void serial8250_release_port(struct uart_port *port)
+{
+	struct uart_8250_port *up = (struct uart_8250_port *)port;
+
+	serial8250_release_std_resource(up);
+	if (up->port.type == PORT_RSA)
+		serial8250_release_rsa_resource(up);
+}
+
+static int serial8250_request_port(struct uart_port *port)
+{
+	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	int ret = 0;
+
+	ret = serial8250_request_std_resource(up);
+	if (ret == 0 && up->port.type == PORT_RSA) {
+		ret = serial8250_request_rsa_resource(up);
+		if (ret < 0)
+			serial8250_release_std_resource(up);
+	}
+
+	return ret;
+}
+
+static void serial8250_config_port(struct uart_port *port, int flags)
+{
+	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	int probeflags = PROBE_ANY;
+	int ret;
+
+	/*
+	 * Find the region that we can probe for.  This in turn
+	 * tells us whether we can probe for the type of port.
+	 */
+	ret = serial8250_request_std_resource(up);
+	if (ret < 0)
+		return;
+
+	ret = serial8250_request_rsa_resource(up);
+	if (ret < 0)
+		probeflags &= ~PROBE_RSA;
+
+	if (flags & UART_CONFIG_TYPE)
+		autoconfig(up, probeflags);
+	if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
+		autoconfig_irq(up);
+
+	if (up->port.type != PORT_RSA && probeflags & PROBE_RSA)
+		serial8250_release_rsa_resource(up);
+	if (up->port.type == PORT_UNKNOWN)
+		serial8250_release_std_resource(up);
+}
+
+static int
+serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	if (ser->irq >= NR_IRQS || ser->irq < 0 ||
+	    ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
+	    ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS ||
+	    ser->type == PORT_STARTECH)
+		return -EINVAL;
+	return 0;
+}
+
+static const char *
+serial8250_type(struct uart_port *port)
+{
+	int type = port->type;
+
+	if (type >= ARRAY_SIZE(uart_config))
+		type = 0;
+	return uart_config[type].name;
+}
+
+static struct uart_ops serial8250_pops = {
+	.tx_empty	= serial8250_tx_empty,
+	.set_mctrl	= serial8250_set_mctrl,
+	.get_mctrl	= serial8250_get_mctrl,
+	.stop_tx	= serial8250_stop_tx,
+	.start_tx	= serial8250_start_tx,
+	.stop_rx	= serial8250_stop_rx,
+	.enable_ms	= serial8250_enable_ms,
+	.break_ctl	= serial8250_break_ctl,
+	.startup	= serial8250_startup,
+	.shutdown	= serial8250_shutdown,
+	.set_termios	= serial8250_set_termios,
+	.pm		= serial8250_pm,
+	.type		= serial8250_type,
+	.release_port	= serial8250_release_port,
+	.request_port	= serial8250_request_port,
+	.config_port	= serial8250_config_port,
+	.verify_port	= serial8250_verify_port,
+};
+
+static struct uart_8250_port serial8250_ports[UART_NR];
+
+static void __init serial8250_isa_init_ports(void)
+{
+	struct uart_8250_port *up;
+	static int first = 1;
+	int i;
+
+	if (!first)
+		return;
+	first = 0;
+
+	for (i = 0; i < nr_uarts; i++) {
+		struct uart_8250_port *up = &serial8250_ports[i];
+
+		up->port.line = i;
+		spin_lock_init(&up->port.lock);
+
+		init_timer(&up->timer);
+		up->timer.function = serial8250_timeout;
+
+		/*
+		 * ALPHA_KLUDGE_MCR needs to be killed.
+		 */
+		up->mcr_mask = ~ALPHA_KLUDGE_MCR;
+		up->mcr_force = ALPHA_KLUDGE_MCR;
+
+		up->port.ops = &serial8250_pops;
+	}
+
+	for (i = 0, up = serial8250_ports;
+	     i < ARRAY_SIZE(old_serial_port) && i < nr_uarts;
+	     i++, up++) {
+		up->port.iobase   = old_serial_port[i].port;
+		up->port.irq      = irq_canonicalize(old_serial_port[i].irq);
+		up->port.uartclk  = old_serial_port[i].baud_base * 16;
+		up->port.flags    = old_serial_port[i].flags;
+		up->port.hub6     = old_serial_port[i].hub6;
+		up->port.membase  = old_serial_port[i].iomem_base;
+		up->port.iotype   = old_serial_port[i].io_type;
+		up->port.regshift = old_serial_port[i].iomem_reg_shift;
+		if (share_irqs)
+			up->port.flags |= UPF_SHARE_IRQ;
+	}
+}
+
+static void __init
+serial8250_register_ports(struct uart_driver *drv, struct device *dev)
+{
+	int i;
+
+	serial8250_isa_init_ports();
+
+	for (i = 0; i < nr_uarts; i++) {
+		struct uart_8250_port *up = &serial8250_ports[i];
+
+		up->port.dev = dev;
+		uart_add_one_port(drv, &up->port);
+	}
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+
+static void serial8250_console_putchar(struct uart_port *port, int ch)
+{
+	struct uart_8250_port *up = (struct uart_8250_port *)port;
+
+	wait_for_xmitr(up, UART_LSR_THRE);
+	serial_out(up, UART_TX, ch);
+}
+
+/*
+ *	Print a string to the serial port trying not to disturb
+ *	any possible real use of the port...
+ *
+ *	The console_lock must be held when we get here.
+ */
+static void
+serial8250_console_write(struct console *co, const char *s, unsigned int count)
+{
+	struct uart_8250_port *up = &serial8250_ports[co->index];
+	unsigned long flags;
+	unsigned int ier;
+	int locked = 1;
+
+	touch_nmi_watchdog();
+
+	local_irq_save(flags);
+	if (up->port.sysrq) {
+		/* serial8250_handle_port() already took the lock */
+		locked = 0;
+	} else if (oops_in_progress) {
+		locked = spin_trylock(&up->port.lock);
+	} else
+		spin_lock(&up->port.lock);
+
+	/*
+	 *	First save the IER then disable the interrupts
+	 */
+	ier = serial_in(up, UART_IER);
+
+	if (up->capabilities & UART_CAP_UUE)
+		serial_out(up, UART_IER, UART_IER_UUE);
+	else
+		serial_out(up, UART_IER, 0);
+
+	uart_console_write(&up->port, s, count, serial8250_console_putchar);
+
+	/*
+	 *	Finally, wait for transmitter to become empty
+	 *	and restore the IER
+	 */
+	wait_for_xmitr(up, BOTH_EMPTY);
+	serial_out(up, UART_IER, ier);
+
+	if (locked)
+		spin_unlock(&up->port.lock);
+	local_irq_restore(flags);
+}
+
+static int __init serial8250_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 9600;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	/*
+	 * Check whether an invalid uart number has been specified, and
+	 * if so, search for the first available port that does have
+	 * console support.
+	 */
+	if (co->index >= nr_uarts)
+		co->index = 0;
+	port = &serial8250_ports[co->index].port;
+	if (!port->iobase && !port->membase)
+		return -ENODEV;
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver serial8250_reg;
+static struct console serial8250_console = {
+	.name		= "ttyS",
+	.write		= serial8250_console_write,
+	.device		= uart_console_device,
+	.setup		= serial8250_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+	.data		= &serial8250_reg,
+};
+
+static int __init serial8250_console_init(void)
+{
+	serial8250_isa_init_ports();
+	register_console(&serial8250_console);
+	return 0;
+}
+console_initcall(serial8250_console_init);
+
+static int __init find_port(struct uart_port *p)
+{
+	int line;
+	struct uart_port *port;
+
+	for (line = 0; line < nr_uarts; line++) {
+		port = &serial8250_ports[line].port;
+		if (uart_match_port(p, port))
+			return line;
+	}
+	return -ENODEV;
+}
+
+int __init serial8250_start_console(struct uart_port *port, char *options)
+{
+	int line;
+
+	line = find_port(port);
+	if (line < 0)
+		return -ENODEV;
+
+	add_preferred_console("ttyS", line, options);
+	printk("Adding console on ttyS%d at %s 0x%lx (options '%s')\n",
+		line, port->iotype == UPIO_MEM ? "MMIO" : "I/O port",
+		port->iotype == UPIO_MEM ? (unsigned long) port->mapbase :
+		    (unsigned long) port->iobase, options);
+	if (!(serial8250_console.flags & CON_ENABLED)) {
+		serial8250_console.flags &= ~CON_PRINTBUFFER;
+		register_console(&serial8250_console);
+	}
+	return line;
+}
+
+#define SERIAL8250_CONSOLE	&serial8250_console
+#else
+#define SERIAL8250_CONSOLE	NULL
+#endif
+
+static struct uart_driver serial8250_reg = {
+	.owner			= THIS_MODULE,
+	.driver_name		= "serial",
+	.dev_name		= "ttyS",
+	.major			= TTY_MAJOR,
+	.minor			= 64,
+	.nr			= UART_NR,
+	.cons			= SERIAL8250_CONSOLE,
+};
+
+/*
+ * early_serial_setup - early registration for 8250 ports
+ *
+ * Setup an 8250 port structure prior to console initialisation.  Use
+ * after console initialisation will cause undefined behaviour.
+ */
+int __init early_serial_setup(struct uart_port *port)
+{
+	if (port->line >= ARRAY_SIZE(serial8250_ports))
+		return -ENODEV;
+
+	serial8250_isa_init_ports();
+	serial8250_ports[port->line].port	= *port;
+	serial8250_ports[port->line].port.ops	= &serial8250_pops;
+	return 0;
+}
+
+/**
+ *	serial8250_suspend_port - suspend one serial port
+ *	@line:  serial line number
+ *
+ *	Suspend one serial port.
+ */
+void serial8250_suspend_port(int line)
+{
+	uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port);
+}
+
+/**
+ *	serial8250_resume_port - resume one serial port
+ *	@line:  serial line number
+ *
+ *	Resume one serial port.
+ */
+void serial8250_resume_port(int line)
+{
+	uart_resume_port(&serial8250_reg, &serial8250_ports[line].port);
+}
+
+/*
+ * Register a set of serial devices attached to a platform device.  The
+ * list is terminated with a zero flags entry, which means we expect
+ * all entries to have at least UPF_BOOT_AUTOCONF set.
+ */
+static int __devinit serial8250_probe(struct platform_device *dev)
+{
+	struct plat_serial8250_port *p = dev->dev.platform_data;
+	struct uart_port port;
+	int ret, i;
+
+	memset(&port, 0, sizeof(struct uart_port));
+
+	for (i = 0; p && p->flags != 0; p++, i++) {
+		port.iobase	= p->iobase;
+		port.membase	= p->membase;
+		port.irq	= p->irq;
+		port.uartclk	= p->uartclk;
+		port.regshift	= p->regshift;
+		port.iotype	= p->iotype;
+		port.flags	= p->flags;
+		port.mapbase	= p->mapbase;
+		port.hub6	= p->hub6;
+		port.dev	= &dev->dev;
+		if (share_irqs)
+			port.flags |= UPF_SHARE_IRQ;
+		ret = serial8250_register_port(&port);
+		if (ret < 0) {
+			dev_err(&dev->dev, "unable to register port at index %d "
+				"(IO%lx MEM%lx IRQ%d): %d\n", i,
+				p->iobase, p->mapbase, p->irq, ret);
+		}
+	}
+	return 0;
+}
+
+/*
+ * Remove serial ports registered against a platform device.
+ */
+static int __devexit serial8250_remove(struct platform_device *dev)
+{
+	int i;
+
+	for (i = 0; i < nr_uarts; i++) {
+		struct uart_8250_port *up = &serial8250_ports[i];
+
+		if (up->port.dev == &dev->dev)
+			serial8250_unregister_port(i);
+	}
+	return 0;
+}
+
+static int serial8250_suspend(struct platform_device *dev, pm_message_t state)
+{
+	int i;
+
+	for (i = 0; i < UART_NR; i++) {
+		struct uart_8250_port *up = &serial8250_ports[i];
+
+		if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
+			uart_suspend_port(&serial8250_reg, &up->port);
+	}
+
+	return 0;
+}
+
+static int serial8250_resume(struct platform_device *dev)
+{
+	int i;
+
+	for (i = 0; i < UART_NR; i++) {
+		struct uart_8250_port *up = &serial8250_ports[i];
+
+		if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
+			uart_resume_port(&serial8250_reg, &up->port);
+	}
+
+	return 0;
+}
+
+static struct platform_driver serial8250_isa_driver = {
+	.probe		= serial8250_probe,
+	.remove		= __devexit_p(serial8250_remove),
+	.suspend	= serial8250_suspend,
+	.resume		= serial8250_resume,
+	.driver		= {
+		.name	= "serial8250",
+		.owner	= THIS_MODULE,
+	},
+};
+
+/*
+ * This "device" covers _all_ ISA 8250-compatible serial devices listed
+ * in the table in include/asm/serial.h
+ */
+static struct platform_device *serial8250_isa_devs;
+
+/*
+ * serial8250_register_port and serial8250_unregister_port allows for
+ * 16x50 serial ports to be configured at run-time, to support PCMCIA
+ * modems and PCI multiport cards.
+ */
+static DEFINE_MUTEX(serial_mutex);
+
+static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port)
+{
+	int i;
+
+	/*
+	 * First, find a port entry which matches.
+	 */
+	for (i = 0; i < nr_uarts; i++)
+		if (uart_match_port(&serial8250_ports[i].port, port))
+			return &serial8250_ports[i];
+
+	/*
+	 * We didn't find a matching entry, so look for the first
+	 * free entry.  We look for one which hasn't been previously
+	 * used (indicated by zero iobase).
+	 */
+	for (i = 0; i < nr_uarts; i++)
+		if (serial8250_ports[i].port.type == PORT_UNKNOWN &&
+		    serial8250_ports[i].port.iobase == 0)
+			return &serial8250_ports[i];
+
+	/*
+	 * That also failed.  Last resort is to find any entry which
+	 * doesn't have a real port associated with it.
+	 */
+	for (i = 0; i < nr_uarts; i++)
+		if (serial8250_ports[i].port.type == PORT_UNKNOWN)
+			return &serial8250_ports[i];
+
+	return NULL;
+}
+
+/**
+ *	serial8250_register_port - register a serial port
+ *	@port: serial port template
+ *
+ *	Configure the serial port specified by the request. If the
+ *	port exists and is in use, it is hung up and unregistered
+ *	first.
+ *
+ *	The port is then probed and if necessary the IRQ is autodetected
+ *	If this fails an error is returned.
+ *
+ *	On success the port is ready to use and the line number is returned.
+ */
+int serial8250_register_port(struct uart_port *port)
+{
+	struct uart_8250_port *uart;
+	int ret = -ENOSPC;
+
+	if (port->uartclk == 0)
+		return -EINVAL;
+
+	mutex_lock(&serial_mutex);
+
+	uart = serial8250_find_match_or_unused(port);
+	if (uart) {
+		uart_remove_one_port(&serial8250_reg, &uart->port);
+
+		uart->port.iobase   = port->iobase;
+		uart->port.membase  = port->membase;
+		uart->port.irq      = port->irq;
+		uart->port.uartclk  = port->uartclk;
+		uart->port.fifosize = port->fifosize;
+		uart->port.regshift = port->regshift;
+		uart->port.iotype   = port->iotype;
+		uart->port.flags    = port->flags | UPF_BOOT_AUTOCONF;
+		uart->port.mapbase  = port->mapbase;
+		if (port->dev)
+			uart->port.dev = port->dev;
+
+		ret = uart_add_one_port(&serial8250_reg, &uart->port);
+		if (ret == 0)
+			ret = uart->port.line;
+	}
+	mutex_unlock(&serial_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(serial8250_register_port);
+
+/**
+ *	serial8250_unregister_port - remove a 16x50 serial port at runtime
+ *	@line: serial line number
+ *
+ *	Remove one serial port.  This may not be called from interrupt
+ *	context.  We hand the port back to the our control.
+ */
+void serial8250_unregister_port(int line)
+{
+	struct uart_8250_port *uart = &serial8250_ports[line];
+
+	mutex_lock(&serial_mutex);
+	uart_remove_one_port(&serial8250_reg, &uart->port);
+	if (serial8250_isa_devs) {
+		uart->port.flags &= ~UPF_BOOT_AUTOCONF;
+		uart->port.type = PORT_UNKNOWN;
+		uart->port.dev = &serial8250_isa_devs->dev;
+		uart_add_one_port(&serial8250_reg, &uart->port);
+	} else {
+		uart->port.dev = NULL;
+	}
+	mutex_unlock(&serial_mutex);
+}
+EXPORT_SYMBOL(serial8250_unregister_port);
+
+static int __init serial8250_init(void)
+{
+	int ret, i;
+
+	if (nr_uarts > UART_NR)
+		nr_uarts = UART_NR;
+
+	printk(KERN_INFO "Serial: 8250/16550 driver $Revision: 1.90 $ "
+		"%d ports, IRQ sharing %sabled\n", nr_uarts,
+		share_irqs ? "en" : "dis");
+
+	for (i = 0; i < NR_IRQS; i++)
+		spin_lock_init(&irq_lists[i].lock);
+
+	ret = uart_register_driver(&serial8250_reg);
+	if (ret)
+		goto out;
+
+	serial8250_isa_devs = platform_device_alloc("serial8250",
+						    PLAT8250_DEV_LEGACY);
+	if (!serial8250_isa_devs) {
+		ret = -ENOMEM;
+		goto unreg_uart_drv;
+	}
+
+	ret = platform_device_add(serial8250_isa_devs);
+	if (ret)
+		goto put_dev;
+
+	serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev);
+
+	ret = platform_driver_register(&serial8250_isa_driver);
+	if (ret == 0)
+		goto out;
+
+	platform_device_del(serial8250_isa_devs);
+ put_dev:
+	platform_device_put(serial8250_isa_devs);
+ unreg_uart_drv:
+	uart_unregister_driver(&serial8250_reg);
+ out:
+	return ret;
+}
+
+static void __exit serial8250_exit(void)
+{
+	struct platform_device *isa_dev = serial8250_isa_devs;
+
+	/*
+	 * This tells serial8250_unregister_port() not to re-register
+	 * the ports (thereby making serial8250_isa_driver permanently
+	 * in use.)
+	 */
+	serial8250_isa_devs = NULL;
+
+	platform_driver_unregister(&serial8250_isa_driver);
+	platform_device_unregister(isa_dev);
+
+	uart_unregister_driver(&serial8250_reg);
+}
+
+module_init(serial8250_init);
+module_exit(serial8250_exit);
+
+EXPORT_SYMBOL(serial8250_suspend_port);
+EXPORT_SYMBOL(serial8250_resume_port);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic 8250/16x50 serial driver $Revision: 1.90 $");
+
+module_param(share_irqs, uint, 0644);
+MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices"
+	" (unsafe)");
+
+module_param(nr_uarts, uint, 0644);
+MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");
+
+#ifdef CONFIG_SERIAL_8250_RSA
+module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444);
+MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
+#endif
+MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
diff -Nur linux-2.6.21.1/drivers/usb/host/ehci.h linux-2.6.21.1-owrt/drivers/usb/host/ehci.h
--- linux-2.6.21.1/drivers/usb/host/ehci.h	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/drivers/usb/host/ehci.h	2007-05-23 23:37:18.000000000 +0200
@@ -87,6 +87,7 @@
 	struct dma_pool		*sitd_pool;	/* sitd per split iso urb */
 
 	struct timer_list	watchdog;
+	struct timer_list	softirq;
 	unsigned long		actions;
 	unsigned		stamp;
 	unsigned long		next_statechange;
diff -Nur linux-2.6.21.1/drivers/usb/host/ehci-hcd.c linux-2.6.21.1-owrt/drivers/usb/host/ehci-hcd.c
--- linux-2.6.21.1/drivers/usb/host/ehci-hcd.c	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/drivers/usb/host/ehci-hcd.c	2007-05-23 23:37:18.000000000 +0200
@@ -118,6 +118,7 @@
 #define EHCI_IO_JIFFIES		(HZ/10)		/* io watchdog > irq_thresh */
 #define EHCI_ASYNC_JIFFIES	(HZ/20)		/* async idle timeout */
 #define EHCI_SHRINK_JIFFIES	(HZ/200)	/* async qh unlink delay */
+#define EHCI_SOFTIRQ		(HZ/400)
 
 /* Initial IRQ latency:  faster than hw default */
 static int log2_irq_thresh = 0;		// 0 to 6
@@ -273,6 +274,16 @@
 #include "ehci-sched.c"
 
 /*-------------------------------------------------------------------------*/
+static irqreturn_t ehci_irq (struct usb_hcd *hcd);
+
+static void ehci_softirq (unsigned long param)
+{
+	struct ehci_hcd         *ehci = (struct ehci_hcd *) param;
+
+	if (ehci_irq(ehci_to_hcd(ehci)) != IRQ_NONE)
+		set_bit(HCD_FLAG_SAW_IRQ, &(ehci_to_hcd(ehci))->flags);
+	mod_timer (&ehci->softirq, jiffies + EHCI_SOFTIRQ);
+}
 
 static void ehci_watchdog (unsigned long param)
 {
@@ -289,6 +300,10 @@
 			COUNT (ehci->stats.lost_iaa);
 			ehci_writel(ehci, STS_IAA, &ehci->regs->status);
 			ehci->reclaim_ready = 1;
+			if (!timer_pending(&ehci->softirq)) {
+				ehci_info(ehci, "switching to softirq\n");
+				mod_timer (&ehci->softirq, jiffies + EHCI_SOFTIRQ);
+			}
 		}
 	}
 
@@ -396,6 +411,7 @@
 
 	/* no more interrupts ... */
 	del_timer_sync (&ehci->watchdog);
+	del_timer_sync (&ehci->softirq);
 
 	spin_lock_irq(&ehci->lock);
 	if (HC_IS_RUNNING (hcd->state))
@@ -444,6 +460,10 @@
 	ehci->watchdog.function = ehci_watchdog;
 	ehci->watchdog.data = (unsigned long) ehci;
 
+	init_timer(&ehci->softirq);
+	ehci->softirq.function = ehci_softirq;
+	ehci->softirq.data = (unsigned long) ehci;
+
 	/*
 	 * hw default: 1K periodic list heads, one per frame.
 	 * periodic_size can shrink by USBCMD update if hcc_params allows.
diff -Nur linux-2.6.21.1/drivers/usb/host/ehci-hcd.c.orig linux-2.6.21.1-owrt/drivers/usb/host/ehci-hcd.c.orig
--- linux-2.6.21.1/drivers/usb/host/ehci-hcd.c.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.21.1-owrt/drivers/usb/host/ehci-hcd.c.orig	2007-04-27 23:49:26.000000000 +0200
@@ -0,0 +1,1008 @@
+/*
+ * Copyright (c) 2000-2004 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dmapool.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
+#include <linux/usb.h>
+#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
+
+#include "../core/hcd.h"
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+#ifdef CONFIG_PPC_PS3
+#include <asm/firmware.h>
+#endif
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI hc_driver implementation ... experimental, incomplete.
+ * Based on the final 1.0 register interface specification.
+ *
+ * USB 2.0 shows up in upcoming www.pcmcia.org technology.
+ * First was PCMCIA, like ISA; then CardBus, which is PCI.
+ * Next comes "CardBay", using USB 2.0 signals.
+ *
+ * Contains additional contributions by Brad Hards, Rory Bolt, and others.
+ * Special thanks to Intel and VIA for providing host controllers to
+ * test this driver on, and Cypress (including In-System Design) for
+ * providing early devices for those host controllers to talk to!
+ *
+ * HISTORY:
+ *
+ * 2004-05-10 Root hub and PCI suspend/resume support; remote wakeup. (db)
+ * 2004-02-24 Replace pci_* with generic dma_* API calls (dsaxena@plexity.net)
+ * 2003-12-29 Rewritten high speed iso transfer support (by Michal Sojka,
+ *	<sojkam@centrum.cz>, updates by DB).
+ *
+ * 2002-11-29	Correct handling for hw async_next register.
+ * 2002-08-06	Handling for bulk and interrupt transfers is mostly shared;
+ *	only scheduling is different, no arbitrary limitations.
+ * 2002-07-25	Sanity check PCI reads, mostly for better cardbus support,
+ *	clean up HC run state handshaking.
+ * 2002-05-24	Preliminary FS/LS interrupts, using scheduling shortcuts
+ * 2002-05-11	Clear TT errors for FS/LS ctrl/bulk.  Fill in some other
+ *	missing pieces:  enabling 64bit dma, handoff from BIOS/SMM.
+ * 2002-05-07	Some error path cleanups to report better errors; wmb();
+ *	use non-CVS version id; better iso bandwidth claim.
+ * 2002-04-19	Control/bulk/interrupt submit no longer uses giveback() on
+ *	errors in submit path.  Bugfixes to interrupt scheduling/processing.
+ * 2002-03-05	Initial high-speed ISO support; reduce ITD memory; shift
+ *	more checking to generic hcd framework (db).  Make it work with
+ *	Philips EHCI; reduce PCI traffic; shorten IRQ path (Rory Bolt).
+ * 2002-01-14	Minor cleanup; version synch.
+ * 2002-01-08	Fix roothub handoff of FS/LS to companion controllers.
+ * 2002-01-04	Control/Bulk queuing behaves.
+ *
+ * 2001-12-12	Initial patch version for Linux 2.5.1 kernel.
+ * 2001-June	Works with usb-storage and NEC EHCI on 2.4
+ */
+
+#define DRIVER_VERSION "10 Dec 2004"
+#define DRIVER_AUTHOR "David Brownell"
+#define DRIVER_DESC "USB 2.0 'Enhanced' Host Controller (EHCI) Driver"
+
+static const char	hcd_name [] = "ehci_hcd";
+
+
+#undef EHCI_VERBOSE_DEBUG
+#undef EHCI_URB_TRACE
+
+#ifdef DEBUG
+#define EHCI_STATS
+#endif
+
+/* magic numbers that can affect system performance */
+#define	EHCI_TUNE_CERR		3	/* 0-3 qtd retries; 0 == don't stop */
+#define	EHCI_TUNE_RL_HS		4	/* nak throttle; see 4.9 */
+#define	EHCI_TUNE_RL_TT		0
+#define	EHCI_TUNE_MULT_HS	1	/* 1-3 transactions/uframe; 4.10.3 */
+#define	EHCI_TUNE_MULT_TT	1
+#define	EHCI_TUNE_FLS		2	/* (small) 256 frame schedule */
+
+#define EHCI_IAA_JIFFIES	(HZ/100)	/* arbitrary; ~10 msec */
+#define EHCI_IO_JIFFIES		(HZ/10)		/* io watchdog > irq_thresh */
+#define EHCI_ASYNC_JIFFIES	(HZ/20)		/* async idle timeout */
+#define EHCI_SHRINK_JIFFIES	(HZ/200)	/* async qh unlink delay */
+
+/* Initial IRQ latency:  faster than hw default */
+static int log2_irq_thresh = 0;		// 0 to 6
+module_param (log2_irq_thresh, int, S_IRUGO);
+MODULE_PARM_DESC (log2_irq_thresh, "log2 IRQ latency, 1-64 microframes");
+
+/* initial park setting:  slower than hw default */
+static unsigned park = 0;
+module_param (park, uint, S_IRUGO);
+MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
+
+/* for flakey hardware, ignore overcurrent indicators */
+static int ignore_oc = 0;
+module_param (ignore_oc, bool, S_IRUGO);
+MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
+
+#define	INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
+
+/*-------------------------------------------------------------------------*/
+
+#include "ehci.h"
+#include "ehci-dbg.c"
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * handshake - spin reading hc until handshake completes or fails
+ * @ptr: address of hc register to be read
+ * @mask: bits to look at in result of read
+ * @done: value of those bits when handshake succeeds
+ * @usec: timeout in microseconds
+ *
+ * Returns negative errno, or zero on success
+ *
+ * Success happens when the "mask" bits have the specified value (hardware
+ * handshake done).  There are two failure modes:  "usec" have passed (major
+ * hardware flakeout), or the register reads as all-ones (hardware removed).
+ *
+ * That last failure should_only happen in cases like physical cardbus eject
+ * before driver shutdown. But it also seems to be caused by bugs in cardbus
+ * bridge shutdown:  shutting down the bridge before the devices using it.
+ */
+static int handshake (struct ehci_hcd *ehci, void __iomem *ptr,
+		      u32 mask, u32 done, int usec)
+{
+	u32	result;
+
+	do {
+		result = ehci_readl(ehci, ptr);
+		if (result == ~(u32)0)		/* card removed */
+			return -ENODEV;
+		result &= mask;
+		if (result == done)
+			return 0;
+		udelay (1);
+		usec--;
+	} while (usec > 0);
+	return -ETIMEDOUT;
+}
+
+/* force HC to halt state from unknown (EHCI spec section 2.3) */
+static int ehci_halt (struct ehci_hcd *ehci)
+{
+	u32	temp = ehci_readl(ehci, &ehci->regs->status);
+
+	/* disable any irqs left enabled by previous code */
+	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+
+	if ((temp & STS_HALT) != 0)
+		return 0;
+
+	temp = ehci_readl(ehci, &ehci->regs->command);
+	temp &= ~CMD_RUN;
+	ehci_writel(ehci, temp, &ehci->regs->command);
+	return handshake (ehci, &ehci->regs->status,
+			  STS_HALT, STS_HALT, 16 * 125);
+}
+
+/* put TDI/ARC silicon into EHCI mode */
+static void tdi_reset (struct ehci_hcd *ehci)
+{
+	u32 __iomem	*reg_ptr;
+	u32		tmp;
+
+	reg_ptr = (u32 __iomem *)(((u8 __iomem *)ehci->regs) + 0x68);
+	tmp = ehci_readl(ehci, reg_ptr);
+	tmp |= 0x3;
+	ehci_writel(ehci, tmp, reg_ptr);
+}
+
+/* reset a non-running (STS_HALT == 1) controller */
+static int ehci_reset (struct ehci_hcd *ehci)
+{
+	int	retval;
+	u32	command = ehci_readl(ehci, &ehci->regs->command);
+
+	command |= CMD_RESET;
+	dbg_cmd (ehci, "reset", command);
+	ehci_writel(ehci, command, &ehci->regs->command);
+	ehci_to_hcd(ehci)->state = HC_STATE_HALT;
+	ehci->next_statechange = jiffies;
+	retval = handshake (ehci, &ehci->regs->command,
+			    CMD_RESET, 0, 250 * 1000);
+
+	if (retval)
+		return retval;
+
+	if (ehci_is_TDI(ehci))
+		tdi_reset (ehci);
+
+	return retval;
+}
+
+/* idle the controller (from running) */
+static void ehci_quiesce (struct ehci_hcd *ehci)
+{
+	u32	temp;
+
+#ifdef DEBUG
+	if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
+		BUG ();
+#endif
+
+	/* wait for any schedule enables/disables to take effect */
+	temp = ehci_readl(ehci, &ehci->regs->command) << 10;
+	temp &= STS_ASS | STS_PSS;
+	if (handshake (ehci, &ehci->regs->status, STS_ASS | STS_PSS,
+				temp, 16 * 125) != 0) {
+		ehci_to_hcd(ehci)->state = HC_STATE_HALT;
+		return;
+	}
+
+	/* then disable anything that's still active */
+	temp = ehci_readl(ehci, &ehci->regs->command);
+	temp &= ~(CMD_ASE | CMD_IAAD | CMD_PSE);
+	ehci_writel(ehci, temp, &ehci->regs->command);
+
+	/* hardware can take 16 microframes to turn off ... */
+	if (handshake (ehci, &ehci->regs->status, STS_ASS | STS_PSS,
+				0, 16 * 125) != 0) {
+		ehci_to_hcd(ehci)->state = HC_STATE_HALT;
+		return;
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void ehci_work(struct ehci_hcd *ehci);
+
+#include "ehci-hub.c"
+#include "ehci-mem.c"
+#include "ehci-q.c"
+#include "ehci-sched.c"
+
+/*-------------------------------------------------------------------------*/
+
+static void ehci_watchdog (unsigned long param)
+{
+	struct ehci_hcd		*ehci = (struct ehci_hcd *) param;
+	unsigned long		flags;
+
+	spin_lock_irqsave (&ehci->lock, flags);
+
+	/* lost IAA irqs wedge things badly; seen with a vt8235 */
+	if (ehci->reclaim) {
+		u32		status = ehci_readl(ehci, &ehci->regs->status);
+		if (status & STS_IAA) {
+			ehci_vdbg (ehci, "lost IAA\n");
+			COUNT (ehci->stats.lost_iaa);
+			ehci_writel(ehci, STS_IAA, &ehci->regs->status);
+			ehci->reclaim_ready = 1;
+		}
+	}
+
+ 	/* stop async processing after it's idled a bit */
+	if (test_bit (TIMER_ASYNC_OFF, &ehci->actions))
+		start_unlink_async (ehci, ehci->async);
+
+	/* ehci could run by timer, without IRQs ... */
+	ehci_work (ehci);
+
+	spin_unlock_irqrestore (&ehci->lock, flags);
+}
+
+/* On some systems, leaving remote wakeup enabled prevents system shutdown.
+ * The firmware seems to think that powering off is a wakeup event!
+ * This routine turns off remote wakeup and everything else, on all ports.
+ */
+static void ehci_turn_off_all_ports(struct ehci_hcd *ehci)
+{
+	int	port = HCS_N_PORTS(ehci->hcs_params);
+
+	while (port--)
+		ehci_writel(ehci, PORT_RWC_BITS,
+				&ehci->regs->port_status[port]);
+}
+
+/* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
+ * This forcibly disables dma and IRQs, helping kexec and other cases
+ * where the next system software may expect clean state.
+ */
+static void
+ehci_shutdown (struct usb_hcd *hcd)
+{
+	struct ehci_hcd	*ehci;
+
+	ehci = hcd_to_ehci (hcd);
+	(void) ehci_halt (ehci);
+	ehci_turn_off_all_ports(ehci);
+
+	/* make BIOS/etc use companion controller during reboot */
+	ehci_writel(ehci, 0, &ehci->regs->configured_flag);
+
+	/* unblock posted writes */
+	ehci_readl(ehci, &ehci->regs->configured_flag);
+}
+
+static void ehci_port_power (struct ehci_hcd *ehci, int is_on)
+{
+	unsigned port;
+
+	if (!HCS_PPC (ehci->hcs_params))
+		return;
+
+	ehci_dbg (ehci, "...power%s ports...\n", is_on ? "up" : "down");
+	for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; )
+		(void) ehci_hub_control(ehci_to_hcd(ehci),
+				is_on ? SetPortFeature : ClearPortFeature,
+				USB_PORT_FEAT_POWER,
+				port--, NULL, 0);
+	msleep(20);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * ehci_work is called from some interrupts, timers, and so on.
+ * it calls driver completion functions, after dropping ehci->lock.
+ */
+static void ehci_work (struct ehci_hcd *ehci)
+{
+	timer_action_done (ehci, TIMER_IO_WATCHDOG);
+	if (ehci->reclaim_ready)
+		end_unlink_async (ehci);
+
+	/* another CPU may drop ehci->lock during a schedule scan while
+	 * it reports urb completions.  this flag guards against bogus
+	 * attempts at re-entrant schedule scanning.
+	 */
+	if (ehci->scanning)
+		return;
+	ehci->scanning = 1;
+	scan_async (ehci);
+	if (ehci->next_uframe != -1)
+		scan_periodic (ehci);
+	ehci->scanning = 0;
+
+	/* the IO watchdog guards against hardware or driver bugs that
+	 * misplace IRQs, and should let us run completely without IRQs.
+	 * such lossage has been observed on both VT6202 and VT8235.
+	 */
+	if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) &&
+			(ehci->async->qh_next.ptr != NULL ||
+			 ehci->periodic_sched != 0))
+		timer_action (ehci, TIMER_IO_WATCHDOG);
+}
+
+static void ehci_stop (struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+
+	ehci_dbg (ehci, "stop\n");
+
+	/* Turn off port power on all root hub ports. */
+	ehci_port_power (ehci, 0);
+
+	/* no more interrupts ... */
+	del_timer_sync (&ehci->watchdog);
+
+	spin_lock_irq(&ehci->lock);
+	if (HC_IS_RUNNING (hcd->state))
+		ehci_quiesce (ehci);
+
+	ehci_reset (ehci);
+	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+	spin_unlock_irq(&ehci->lock);
+
+	/* let companion controllers work when we aren't */
+	ehci_writel(ehci, 0, &ehci->regs->configured_flag);
+
+	remove_companion_file(ehci);
+	remove_debug_files (ehci);
+
+	/* root hub is shut down separately (first, when possible) */
+	spin_lock_irq (&ehci->lock);
+	if (ehci->async)
+		ehci_work (ehci);
+	spin_unlock_irq (&ehci->lock);
+	ehci_mem_cleanup (ehci);
+
+#ifdef	EHCI_STATS
+	ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n",
+		ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim,
+		ehci->stats.lost_iaa);
+	ehci_dbg (ehci, "complete %ld unlink %ld\n",
+		ehci->stats.complete, ehci->stats.unlink);
+#endif
+
+	dbg_status (ehci, "ehci_stop completed",
+		    ehci_readl(ehci, &ehci->regs->status));
+}
+
+/* one-time init, only for memory state */
+static int ehci_init(struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+	u32			temp;
+	int			retval;
+	u32			hcc_params;
+
+	spin_lock_init(&ehci->lock);
+
+	init_timer(&ehci->watchdog);
+	ehci->watchdog.function = ehci_watchdog;
+	ehci->watchdog.data = (unsigned long) ehci;
+
+	/*
+	 * hw default: 1K periodic list heads, one per frame.
+	 * periodic_size can shrink by USBCMD update if hcc_params allows.
+	 */
+	ehci->periodic_size = DEFAULT_I_TDPS;
+	if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
+		return retval;
+
+	/* controllers may cache some of the periodic schedule ... */
+	hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
+	if (HCC_ISOC_CACHE(hcc_params))		// full frame cache
+		ehci->i_thresh = 8;
+	else					// N microframes cached
+		ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
+
+	ehci->reclaim = NULL;
+	ehci->reclaim_ready = 0;
+	ehci->next_uframe = -1;
+
+	/*
+	 * dedicate a qh for the async ring head, since we couldn't unlink
+	 * a 'real' qh without stopping the async schedule [4.8].  use it
+	 * as the 'reclamation list head' too.
+	 * its dummy is used in hw_alt_next of many tds, to prevent the qh
+	 * from automatically advancing to the next td after short reads.
+	 */
+	ehci->async->qh_next.qh = NULL;
+	ehci->async->hw_next = QH_NEXT(ehci->async->qh_dma);
+	ehci->async->hw_info1 = cpu_to_le32(QH_HEAD);
+	ehci->async->hw_token = cpu_to_le32(QTD_STS_HALT);
+	ehci->async->hw_qtd_next = EHCI_LIST_END;
+	ehci->async->qh_state = QH_STATE_LINKED;
+	ehci->async->hw_alt_next = QTD_NEXT(ehci->async->dummy->qtd_dma);
+
+	/* clear interrupt enables, set irq latency */
+	if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
+		log2_irq_thresh = 0;
+	temp = 1 << (16 + log2_irq_thresh);
+	if (HCC_CANPARK(hcc_params)) {
+		/* HW default park == 3, on hardware that supports it (like
+		 * NVidia and ALI silicon), maximizes throughput on the async
+		 * schedule by avoiding QH fetches between transfers.
+		 *
+		 * With fast usb storage devices and NForce2, "park" seems to
+		 * make problems:  throughput reduction (!), data errors...
+		 */
+		if (park) {
+			park = min(park, (unsigned) 3);
+			temp |= CMD_PARK;
+			temp |= park << 8;
+		}
+		ehci_dbg(ehci, "park %d\n", park);
+	}
+	if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
+		/* periodic schedule size can be smaller than default */
+		temp &= ~(3 << 2);
+		temp |= (EHCI_TUNE_FLS << 2);
+		switch (EHCI_TUNE_FLS) {
+		case 0: ehci->periodic_size = 1024; break;
+		case 1: ehci->periodic_size = 512; break;
+		case 2: ehci->periodic_size = 256; break;
+		default:	BUG();
+		}
+	}
+	ehci->command = temp;
+
+	return 0;
+}
+
+/* start HC running; it's halted, ehci_init() has been run (once) */
+static int ehci_run (struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	int			retval;
+	u32			temp;
+	u32			hcc_params;
+
+	hcd->uses_new_polling = 1;
+	hcd->poll_rh = 0;
+
+	/* EHCI spec section 4.1 */
+	if ((retval = ehci_reset(ehci)) != 0) {
+		ehci_mem_cleanup(ehci);
+		return retval;
+	}
+	ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
+	ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
+
+	/*
+	 * hcc_params controls whether ehci->regs->segment must (!!!)
+	 * be used; it constrains QH/ITD/SITD and QTD locations.
+	 * pci_pool consistent memory always uses segment zero.
+	 * streaming mappings for I/O buffers, like pci_map_single(),
+	 * can return segments above 4GB, if the device allows.
+	 *
+	 * NOTE:  the dma mask is visible through dma_supported(), so
+	 * drivers can pass this info along ... like NETIF_F_HIGHDMA,
+	 * Scsi_Host.highmem_io, and so forth.  It's readonly to all
+	 * host side drivers though.
+	 */
+	hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
+	if (HCC_64BIT_ADDR(hcc_params)) {
+		ehci_writel(ehci, 0, &ehci->regs->segment);
+#if 0
+// this is deeply broken on almost all architectures
+		if (!dma_set_mask(hcd->self.controller, DMA_64BIT_MASK))
+			ehci_info(ehci, "enabled 64bit DMA\n");
+#endif
+	}
+
+
+	// Philips, Intel, and maybe others need CMD_RUN before the
+	// root hub will detect new devices (why?); NEC doesn't
+	ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
+	ehci->command |= CMD_RUN;
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+	dbg_cmd (ehci, "init", ehci->command);
+
+	/*
+	 * Start, enabling full USB 2.0 functionality ... usb 1.1 devices
+	 * are explicitly handed to companion controller(s), so no TT is
+	 * involved with the root hub.  (Except where one is integrated,
+	 * and there's no companion controller unless maybe for USB OTG.)
+	 */
+	hcd->state = HC_STATE_RUNNING;
+	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
+
+	temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
+	ehci_info (ehci,
+		"USB %x.%x started, EHCI %x.%02x, driver %s%s\n",
+		((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
+		temp >> 8, temp & 0xff, DRIVER_VERSION,
+		ignore_oc ? ", overcurrent ignored" : "");
+
+	ehci_writel(ehci, INTR_MASK,
+		    &ehci->regs->intr_enable); /* Turn On Interrupts */
+
+	/* GRR this is run-once init(), being done every time the HC starts.
+	 * So long as they're part of class devices, we can't do it init()
+	 * since the class device isn't created that early.
+	 */
+	create_debug_files(ehci);
+	create_companion_file(ehci);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static irqreturn_t ehci_irq (struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	u32			status, pcd_status = 0;
+	int			bh;
+
+	spin_lock (&ehci->lock);
+
+	status = ehci_readl(ehci, &ehci->regs->status);
+
+	/* e.g. cardbus physical eject */
+	if (status == ~(u32) 0) {
+		ehci_dbg (ehci, "device removed\n");
+		goto dead;
+	}
+
+	status &= INTR_MASK;
+	if (!status) {			/* irq sharing? */
+		spin_unlock(&ehci->lock);
+		return IRQ_NONE;
+	}
+
+	/* clear (just) interrupts */
+	ehci_writel(ehci, status, &ehci->regs->status);
+	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted write */
+	bh = 0;
+
+#ifdef	EHCI_VERBOSE_DEBUG
+	/* unrequested/ignored: Frame List Rollover */
+	dbg_status (ehci, "irq", status);
+#endif
+
+	/* INT, ERR, and IAA interrupt rates can be throttled */
+
+	/* normal [4.15.1.2] or error [4.15.1.1] completion */
+	if (likely ((status & (STS_INT|STS_ERR)) != 0)) {
+		if (likely ((status & STS_ERR) == 0))
+			COUNT (ehci->stats.normal);
+		else
+			COUNT (ehci->stats.error);
+		bh = 1;
+	}
+
+	/* complete the unlinking of some qh [4.15.2.3] */
+	if (status & STS_IAA) {
+		COUNT (ehci->stats.reclaim);
+		ehci->reclaim_ready = 1;
+		bh = 1;
+	}
+
+	/* remote wakeup [4.3.1] */
+	if (status & STS_PCD) {
+		unsigned	i = HCS_N_PORTS (ehci->hcs_params);
+		pcd_status = status;
+
+		/* resume root hub? */
+		if (!(ehci_readl(ehci, &ehci->regs->command) & CMD_RUN))
+			usb_hcd_resume_root_hub(hcd);
+
+		while (i--) {
+			int pstatus = ehci_readl(ehci,
+						 &ehci->regs->port_status [i]);
+
+			if (pstatus & PORT_OWNER)
+				continue;
+			if (!(pstatus & PORT_RESUME)
+					|| ehci->reset_done [i] != 0)
+				continue;
+
+			/* start 20 msec resume signaling from this port,
+			 * and make khubd collect PORT_STAT_C_SUSPEND to
+			 * stop that signaling.
+			 */
+			ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
+			ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
+			mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
+		}
+	}
+
+	/* PCI errors [4.15.2.4] */
+	if (unlikely ((status & STS_FATAL) != 0)) {
+		/* bogus "fatal" IRQs appear on some chips... why?  */
+		status = ehci_readl(ehci, &ehci->regs->status);
+		dbg_cmd (ehci, "fatal", ehci_readl(ehci,
+						   &ehci->regs->command));
+		dbg_status (ehci, "fatal", status);
+		if (status & STS_HALT) {
+			ehci_err (ehci, "fatal error\n");
+dead:
+			ehci_reset (ehci);
+			ehci_writel(ehci, 0, &ehci->regs->configured_flag);
+			/* generic layer kills/unlinks all urbs, then
+			 * uses ehci_stop to clean up the rest
+			 */
+			bh = 1;
+		}
+	}
+
+	if (bh)
+		ehci_work (ehci);
+	spin_unlock (&ehci->lock);
+	if (pcd_status & STS_PCD)
+		usb_hcd_poll_rh_status(hcd);
+	return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * non-error returns are a promise to giveback() the urb later
+ * we drop ownership so next owner (or urb unlink) can get it
+ *
+ * urb + dev is in hcd.self.controller.urb_list
+ * we're queueing TDs onto software and hardware lists
+ *
+ * hcd-specific init for hcpriv hasn't been done yet
+ *
+ * NOTE:  control, bulk, and interrupt share the same code to append TDs
+ * to a (possibly active) QH, and the same QH scanning code.
+ */
+static int ehci_urb_enqueue (
+	struct usb_hcd	*hcd,
+	struct usb_host_endpoint *ep,
+	struct urb	*urb,
+	gfp_t		mem_flags
+) {
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	struct list_head	qtd_list;
+
+	INIT_LIST_HEAD (&qtd_list);
+
+	switch (usb_pipetype (urb->pipe)) {
+	// case PIPE_CONTROL:
+	// case PIPE_BULK:
+	default:
+		if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
+			return -ENOMEM;
+		return submit_async (ehci, ep, urb, &qtd_list, mem_flags);
+
+	case PIPE_INTERRUPT:
+		if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
+			return -ENOMEM;
+		return intr_submit (ehci, ep, urb, &qtd_list, mem_flags);
+
+	case PIPE_ISOCHRONOUS:
+		if (urb->dev->speed == USB_SPEED_HIGH)
+			return itd_submit (ehci, urb, mem_flags);
+		else
+			return sitd_submit (ehci, urb, mem_flags);
+	}
+}
+
+static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
+{
+	/* if we need to use IAA and it's busy, defer */
+	if (qh->qh_state == QH_STATE_LINKED
+			&& ehci->reclaim
+			&& HC_IS_RUNNING (ehci_to_hcd(ehci)->state)) {
+		struct ehci_qh		*last;
+
+		for (last = ehci->reclaim;
+				last->reclaim;
+				last = last->reclaim)
+			continue;
+		qh->qh_state = QH_STATE_UNLINK_WAIT;
+		last->reclaim = qh;
+
+	/* bypass IAA if the hc can't care */
+	} else if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state) && ehci->reclaim)
+		end_unlink_async (ehci);
+
+	/* something else might have unlinked the qh by now */
+	if (qh->qh_state == QH_STATE_LINKED)
+		start_unlink_async (ehci, qh);
+}
+
+/* remove from hardware lists
+ * completions normally happen asynchronously
+ */
+
+static int ehci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	struct ehci_qh		*qh;
+	unsigned long		flags;
+
+	spin_lock_irqsave (&ehci->lock, flags);
+	switch (usb_pipetype (urb->pipe)) {
+	// case PIPE_CONTROL:
+	// case PIPE_BULK:
+	default:
+		qh = (struct ehci_qh *) urb->hcpriv;
+		if (!qh)
+			break;
+		unlink_async (ehci, qh);
+		break;
+
+	case PIPE_INTERRUPT:
+		qh = (struct ehci_qh *) urb->hcpriv;
+		if (!qh)
+			break;
+		switch (qh->qh_state) {
+		case QH_STATE_LINKED:
+			intr_deschedule (ehci, qh);
+			/* FALL THROUGH */
+		case QH_STATE_IDLE:
+			qh_completions (ehci, qh);
+			break;
+		default:
+			ehci_dbg (ehci, "bogus qh %p state %d\n",
+					qh, qh->qh_state);
+			goto done;
+		}
+
+		/* reschedule QH iff another request is queued */
+		if (!list_empty (&qh->qtd_list)
+				&& HC_IS_RUNNING (hcd->state)) {
+			int status;
+
+			status = qh_schedule (ehci, qh);
+			spin_unlock_irqrestore (&ehci->lock, flags);
+
+			if (status != 0) {
+				// shouldn't happen often, but ...
+				// FIXME kill those tds' urbs
+				err ("can't reschedule qh %p, err %d",
+					qh, status);
+			}
+			return status;
+		}
+		break;
+
+	case PIPE_ISOCHRONOUS:
+		// itd or sitd ...
+
+		// wait till next completion, do it then.
+		// completion irqs can wait up to 1024 msec,
+		break;
+	}
+done:
+	spin_unlock_irqrestore (&ehci->lock, flags);
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+// bulk qh holds the data toggle
+
+static void
+ehci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	unsigned long		flags;
+	struct ehci_qh		*qh, *tmp;
+
+	/* ASSERT:  any requests/urbs are being unlinked */
+	/* ASSERT:  nobody can be submitting urbs for this any more */
+
+rescan:
+	spin_lock_irqsave (&ehci->lock, flags);
+	qh = ep->hcpriv;
+	if (!qh)
+		goto done;
+
+	/* endpoints can be iso streams.  for now, we don't
+	 * accelerate iso completions ... so spin a while.
+	 */
+	if (qh->hw_info1 == 0) {
+		ehci_vdbg (ehci, "iso delay\n");
+		goto idle_timeout;
+	}
+
+	if (!HC_IS_RUNNING (hcd->state))
+		qh->qh_state = QH_STATE_IDLE;
+	switch (qh->qh_state) {
+	case QH_STATE_LINKED:
+		for (tmp = ehci->async->qh_next.qh;
+				tmp && tmp != qh;
+				tmp = tmp->qh_next.qh)
+			continue;
+		/* periodic qh self-unlinks on empty */
+		if (!tmp)
+			goto nogood;
+		unlink_async (ehci, qh);
+		/* FALL THROUGH */
+	case QH_STATE_UNLINK:		/* wait for hw to finish? */
+idle_timeout:
+		spin_unlock_irqrestore (&ehci->lock, flags);
+		schedule_timeout_uninterruptible(1);
+		goto rescan;
+	case QH_STATE_IDLE:		/* fully unlinked */
+		if (list_empty (&qh->qtd_list)) {
+			qh_put (qh);
+			break;
+		}
+		/* else FALL THROUGH */
+	default:
+nogood:
+		/* caller was supposed to have unlinked any requests;
+		 * that's not our job.  just leak this memory.
+		 */
+		ehci_err (ehci, "qh %p (#%02x) state %d%s\n",
+			qh, ep->desc.bEndpointAddress, qh->qh_state,
+			list_empty (&qh->qtd_list) ? "" : "(has tds)");
+		break;
+	}
+	ep->hcpriv = NULL;
+done:
+	spin_unlock_irqrestore (&ehci->lock, flags);
+	return;
+}
+
+static int ehci_get_frame (struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	return (ehci_readl(ehci, &ehci->regs->frame_index) >> 3) %
+		ehci->periodic_size;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
+
+MODULE_DESCRIPTION (DRIVER_INFO);
+MODULE_AUTHOR (DRIVER_AUTHOR);
+MODULE_LICENSE ("GPL");
+
+#ifdef CONFIG_PCI
+#include "ehci-pci.c"
+#define	PCI_DRIVER		ehci_pci_driver
+#endif
+
+#ifdef CONFIG_MPC834x
+#include "ehci-fsl.c"
+#define	PLATFORM_DRIVER		ehci_fsl_driver
+#endif
+
+#ifdef CONFIG_SOC_AU1200
+#include "ehci-au1xxx.c"
+#define	PLATFORM_DRIVER		ehci_hcd_au1xxx_driver
+#endif
+
+#ifdef CONFIG_PPC_PS3
+#include "ehci-ps3.c"
+#define	PS3_SYSTEM_BUS_DRIVER	ps3_ehci_sb_driver
+#endif
+
+#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+    !defined(PS3_SYSTEM_BUS_DRIVER)
+#error "missing bus glue for ehci-hcd"
+#endif
+
+static int __init ehci_hcd_init(void)
+{
+	int retval = 0;
+
+	pr_debug("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
+		 hcd_name,
+		 sizeof(struct ehci_qh), sizeof(struct ehci_qtd),
+		 sizeof(struct ehci_itd), sizeof(struct ehci_sitd));
+
+#ifdef PLATFORM_DRIVER
+	retval = platform_driver_register(&PLATFORM_DRIVER);
+	if (retval < 0)
+		return retval;
+#endif
+
+#ifdef PCI_DRIVER
+	retval = pci_register_driver(&PCI_DRIVER);
+	if (retval < 0) {
+#ifdef PLATFORM_DRIVER
+		platform_driver_unregister(&PLATFORM_DRIVER);
+#endif
+		return retval;
+	}
+#endif
+
+#ifdef PS3_SYSTEM_BUS_DRIVER
+	if (firmware_has_feature(FW_FEATURE_PS3_LV1)) {
+		retval = ps3_system_bus_driver_register(
+				&PS3_SYSTEM_BUS_DRIVER);
+		if (retval < 0) {
+#ifdef PLATFORM_DRIVER
+			platform_driver_unregister(&PLATFORM_DRIVER);
+#endif
+#ifdef PCI_DRIVER
+			pci_unregister_driver(&PCI_DRIVER);
+#endif
+			return retval;
+		}
+	}
+#endif
+
+	return retval;
+}
+module_init(ehci_hcd_init);
+
+static void __exit ehci_hcd_cleanup(void)
+{
+#ifdef PLATFORM_DRIVER
+	platform_driver_unregister(&PLATFORM_DRIVER);
+#endif
+#ifdef PCI_DRIVER
+	pci_unregister_driver(&PCI_DRIVER);
+#endif
+#ifdef PS3_SYSTEM_BUS_DRIVER
+	if (firmware_has_feature(FW_FEATURE_PS3_LV1))
+		ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+#endif
+}
+module_exit(ehci_hcd_cleanup);
+
diff -Nur linux-2.6.21.1/drivers/usb/host/ehci.h.orig linux-2.6.21.1-owrt/drivers/usb/host/ehci.h.orig
--- linux-2.6.21.1/drivers/usb/host/ehci.h.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.21.1-owrt/drivers/usb/host/ehci.h.orig	2007-04-27 23:49:26.000000000 +0200
@@ -0,0 +1,707 @@
+/*
+ * Copyright (c) 2001-2002 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_EHCI_HCD_H
+#define __LINUX_EHCI_HCD_H
+
+/* definitions used for the EHCI driver */
+
+/* statistics can be kept for for tuning/monitoring */
+struct ehci_stats {
+	/* irq usage */
+	unsigned long		normal;
+	unsigned long		error;
+	unsigned long		reclaim;
+	unsigned long		lost_iaa;
+
+	/* termination of urbs from core */
+	unsigned long		complete;
+	unsigned long		unlink;
+};
+
+/* ehci_hcd->lock guards shared data against other CPUs:
+ *   ehci_hcd:	async, reclaim, periodic (and shadow), ...
+ *   usb_host_endpoint: hcpriv
+ *   ehci_qh:	qh_next, qtd_list
+ *   ehci_qtd:	qtd_list
+ *
+ * Also, hold this lock when talking to HC registers or
+ * when updating hw_* fields in shared qh/qtd/... structures.
+ */
+
+#define	EHCI_MAX_ROOT_PORTS	15		/* see HCS_N_PORTS */
+
+struct ehci_hcd {			/* one per controller */
+	/* glue to PCI and HCD framework */
+	struct ehci_caps __iomem *caps;
+	struct ehci_regs __iomem *regs;
+	struct ehci_dbg_port __iomem *debug;
+
+	__u32			hcs_params;	/* cached register copy */
+	spinlock_t		lock;
+
+	/* async schedule support */
+	struct ehci_qh		*async;
+	struct ehci_qh		*reclaim;
+	unsigned		reclaim_ready : 1;
+	unsigned		scanning : 1;
+
+	/* periodic schedule support */
+#define	DEFAULT_I_TDPS		1024		/* some HCs can do less */
+	unsigned		periodic_size;
+	__le32			*periodic;	/* hw periodic table */
+	dma_addr_t		periodic_dma;
+	unsigned		i_thresh;	/* uframes HC might cache */
+
+	union ehci_shadow	*pshadow;	/* mirror hw periodic table */
+	int			next_uframe;	/* scan periodic, start here */
+	unsigned		periodic_sched;	/* periodic activity count */
+
+	/* per root hub port */
+	unsigned long		reset_done [EHCI_MAX_ROOT_PORTS];
+	/* bit vectors (one bit per port) */
+	unsigned long		bus_suspended;		/* which ports were
+			already suspended at the start of a bus suspend */
+	unsigned long		companion_ports;	/* which ports are
+			dedicated to the companion controller */
+
+	/* per-HC memory pools (could be per-bus, but ...) */
+	struct dma_pool		*qh_pool;	/* qh per active urb */
+	struct dma_pool		*qtd_pool;	/* one or more per qh */
+	struct dma_pool		*itd_pool;	/* itd per iso urb */
+	struct dma_pool		*sitd_pool;	/* sitd per split iso urb */
+
+	struct timer_list	watchdog;
+	unsigned long		actions;
+	unsigned		stamp;
+	unsigned long		next_statechange;
+	u32			command;
+
+	/* SILICON QUIRKS */
+	unsigned		is_tdi_rh_tt:1;	/* TDI roothub with TT */
+	unsigned		no_selective_suspend:1;
+	unsigned		has_fsl_port_bug:1; /* FreeScale */
+	unsigned		big_endian_mmio:1;
+
+	u8			sbrn;		/* packed release number */
+
+	/* irq statistics */
+#ifdef EHCI_STATS
+	struct ehci_stats	stats;
+#	define COUNT(x) do { (x)++; } while (0)
+#else
+#	define COUNT(x) do {} while (0)
+#endif
+};
+
+/* convert between an HCD pointer and the corresponding EHCI_HCD */
+static inline struct ehci_hcd *hcd_to_ehci (struct usb_hcd *hcd)
+{
+	return (struct ehci_hcd *) (hcd->hcd_priv);
+}
+static inline struct usb_hcd *ehci_to_hcd (struct ehci_hcd *ehci)
+{
+	return container_of ((void *) ehci, struct usb_hcd, hcd_priv);
+}
+
+
+enum ehci_timer_action {
+	TIMER_IO_WATCHDOG,
+	TIMER_IAA_WATCHDOG,
+	TIMER_ASYNC_SHRINK,
+	TIMER_ASYNC_OFF,
+};
+
+static inline void
+timer_action_done (struct ehci_hcd *ehci, enum ehci_timer_action action)
+{
+	clear_bit (action, &ehci->actions);
+}
+
+static inline void
+timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
+{
+	if (!test_and_set_bit (action, &ehci->actions)) {
+		unsigned long t;
+
+		switch (action) {
+		case TIMER_IAA_WATCHDOG:
+			t = EHCI_IAA_JIFFIES;
+			break;
+		case TIMER_IO_WATCHDOG:
+			t = EHCI_IO_JIFFIES;
+			break;
+		case TIMER_ASYNC_OFF:
+			t = EHCI_ASYNC_JIFFIES;
+			break;
+		// case TIMER_ASYNC_SHRINK:
+		default:
+			t = EHCI_SHRINK_JIFFIES;
+			break;
+		}
+		t += jiffies;
+		// all timings except IAA watchdog can be overridden.
+		// async queue SHRINK often precedes IAA.  while it's ready
+		// to go OFF neither can matter, and afterwards the IO
+		// watchdog stops unless there's still periodic traffic.
+		if (action != TIMER_IAA_WATCHDOG
+				&& t > ehci->watchdog.expires
+				&& timer_pending (&ehci->watchdog))
+			return;
+		mod_timer (&ehci->watchdog, t);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
+
+/* Section 2.2 Host Controller Capability Registers */
+struct ehci_caps {
+	/* these fields are specified as 8 and 16 bit registers,
+	 * but some hosts can't perform 8 or 16 bit PCI accesses.
+	 */
+	u32		hc_capbase;
+#define HC_LENGTH(p)		(((p)>>00)&0x00ff)	/* bits 7:0 */
+#define HC_VERSION(p)		(((p)>>16)&0xffff)	/* bits 31:16 */
+	u32		hcs_params;     /* HCSPARAMS - offset 0x4 */
+#define HCS_DEBUG_PORT(p)	(((p)>>20)&0xf)	/* bits 23:20, debug port? */
+#define HCS_INDICATOR(p)	((p)&(1 << 16))	/* true: has port indicators */
+#define HCS_N_CC(p)		(((p)>>12)&0xf)	/* bits 15:12, #companion HCs */
+#define HCS_N_PCC(p)		(((p)>>8)&0xf)	/* bits 11:8, ports per CC */
+#define HCS_PORTROUTED(p)	((p)&(1 << 7))	/* true: port routing */
+#define HCS_PPC(p)		((p)&(1 << 4))	/* true: port power control */
+#define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
+
+	u32		hcc_params;      /* HCCPARAMS - offset 0x8 */
+#define HCC_EXT_CAPS(p)		(((p)>>8)&0xff)	/* for pci extended caps */
+#define HCC_ISOC_CACHE(p)       ((p)&(1 << 7))  /* true: can cache isoc frame */
+#define HCC_ISOC_THRES(p)       (((p)>>4)&0x7)  /* bits 6:4, uframes cached */
+#define HCC_CANPARK(p)		((p)&(1 << 2))  /* true: can park on async qh */
+#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
+#define HCC_64BIT_ADDR(p)       ((p)&(1))       /* true: can use 64-bit addr */
+	u8		portroute [8];	 /* nibbles for routing - offset 0xC */
+} __attribute__ ((packed));
+
+
+/* Section 2.3 Host Controller Operational Registers */
+struct ehci_regs {
+
+	/* USBCMD: offset 0x00 */
+	u32		command;
+/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
+#define CMD_PARK	(1<<11)		/* enable "park" on async qh */
+#define CMD_PARK_CNT(c)	(((c)>>8)&3)	/* how many transfers to park for */
+#define CMD_LRESET	(1<<7)		/* partial reset (no ports, etc) */
+#define CMD_IAAD	(1<<6)		/* "doorbell" interrupt async advance */
+#define CMD_ASE		(1<<5)		/* async schedule enable */
+#define CMD_PSE		(1<<4)		/* periodic schedule enable */
+/* 3:2 is periodic frame list size */
+#define CMD_RESET	(1<<1)		/* reset HC not bus */
+#define CMD_RUN		(1<<0)		/* start/stop HC */
+
+	/* USBSTS: offset 0x04 */
+	u32		status;
+#define STS_ASS		(1<<15)		/* Async Schedule Status */
+#define STS_PSS		(1<<14)		/* Periodic Schedule Status */
+#define STS_RECL	(1<<13)		/* Reclamation */
+#define STS_HALT	(1<<12)		/* Not running (any reason) */
+/* some bits reserved */
+	/* these STS_* flags are also intr_enable bits (USBINTR) */
+#define STS_IAA		(1<<5)		/* Interrupted on async advance */
+#define STS_FATAL	(1<<4)		/* such as some PCI access errors */
+#define STS_FLR		(1<<3)		/* frame list rolled over */
+#define STS_PCD		(1<<2)		/* port change detect */
+#define STS_ERR		(1<<1)		/* "error" completion (overflow, ...) */
+#define STS_INT		(1<<0)		/* "normal" completion (short, ...) */
+
+	/* USBINTR: offset 0x08 */
+	u32		intr_enable;
+
+	/* FRINDEX: offset 0x0C */
+	u32		frame_index;	/* current microframe number */
+	/* CTRLDSSEGMENT: offset 0x10 */
+	u32		segment;	/* address bits 63:32 if needed */
+	/* PERIODICLISTBASE: offset 0x14 */
+	u32		frame_list;	/* points to periodic list */
+	/* ASYNCLISTADDR: offset 0x18 */
+	u32		async_next;	/* address of next async queue head */
+
+	u32		reserved [9];
+
+	/* CONFIGFLAG: offset 0x40 */
+	u32		configured_flag;
+#define FLAG_CF		(1<<0)		/* true: we'll support "high speed" */
+
+	/* PORTSC: offset 0x44 */
+	u32		port_status [0];	/* up to N_PORTS */
+/* 31:23 reserved */
+#define PORT_WKOC_E	(1<<22)		/* wake on overcurrent (enable) */
+#define PORT_WKDISC_E	(1<<21)		/* wake on disconnect (enable) */
+#define PORT_WKCONN_E	(1<<20)		/* wake on connect (enable) */
+/* 19:16 for port testing */
+#define PORT_LED_OFF	(0<<14)
+#define PORT_LED_AMBER	(1<<14)
+#define PORT_LED_GREEN	(2<<14)
+#define PORT_LED_MASK	(3<<14)
+#define PORT_OWNER	(1<<13)		/* true: companion hc owns this port */
+#define PORT_POWER	(1<<12)		/* true: has power (see PPC) */
+#define PORT_USB11(x) (((x)&(3<<10))==(1<<10))	/* USB 1.1 device */
+/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
+/* 9 reserved */
+#define PORT_RESET	(1<<8)		/* reset port */
+#define PORT_SUSPEND	(1<<7)		/* suspend port */
+#define PORT_RESUME	(1<<6)		/* resume it */
+#define PORT_OCC	(1<<5)		/* over current change */
+#define PORT_OC		(1<<4)		/* over current active */
+#define PORT_PEC	(1<<3)		/* port enable change */
+#define PORT_PE		(1<<2)		/* port enable */
+#define PORT_CSC	(1<<1)		/* connect status change */
+#define PORT_CONNECT	(1<<0)		/* device connected */
+#define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
+} __attribute__ ((packed));
+
+/* Appendix C, Debug port ... intended for use with special "debug devices"
+ * that can help if there's no serial console.  (nonstandard enumeration.)
+ */
+struct ehci_dbg_port {
+	u32	control;
+#define DBGP_OWNER	(1<<30)
+#define DBGP_ENABLED	(1<<28)
+#define DBGP_DONE	(1<<16)
+#define DBGP_INUSE	(1<<10)
+#define DBGP_ERRCODE(x)	(((x)>>7)&0x07)
+#	define DBGP_ERR_BAD	1
+#	define DBGP_ERR_SIGNAL	2
+#define DBGP_ERROR	(1<<6)
+#define DBGP_GO		(1<<5)
+#define DBGP_OUT	(1<<4)
+#define DBGP_LEN(x)	(((x)>>0)&0x0f)
+	u32	pids;
+#define DBGP_PID_GET(x)		(((x)>>16)&0xff)
+#define DBGP_PID_SET(data,tok)	(((data)<<8)|(tok))
+	u32	data03;
+	u32	data47;
+	u32	address;
+#define DBGP_EPADDR(dev,ep)	(((dev)<<8)|(ep))
+} __attribute__ ((packed));
+
+/*-------------------------------------------------------------------------*/
+
+#define	QTD_NEXT(dma)	cpu_to_le32((u32)dma)
+
+/*
+ * EHCI Specification 0.95 Section 3.5
+ * QTD: describe data transfer components (buffer, direction, ...)
+ * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
+ *
+ * These are associated only with "QH" (Queue Head) structures,
+ * used with control, bulk, and interrupt transfers.
+ */
+struct ehci_qtd {
+	/* first part defined by EHCI spec */
+	__le32			hw_next;	  /* see EHCI 3.5.1 */
+	__le32			hw_alt_next;      /* see EHCI 3.5.2 */
+	__le32			hw_token;         /* see EHCI 3.5.3 */
+#define	QTD_TOGGLE	(1 << 31)	/* data toggle */
+#define	QTD_LENGTH(tok)	(((tok)>>16) & 0x7fff)
+#define	QTD_IOC		(1 << 15)	/* interrupt on complete */
+#define	QTD_CERR(tok)	(((tok)>>10) & 0x3)
+#define	QTD_PID(tok)	(((tok)>>8) & 0x3)
+#define	QTD_STS_ACTIVE	(1 << 7)	/* HC may execute this */
+#define	QTD_STS_HALT	(1 << 6)	/* halted on error */
+#define	QTD_STS_DBE	(1 << 5)	/* data buffer error (in HC) */
+#define	QTD_STS_BABBLE	(1 << 4)	/* device was babbling (qtd halted) */
+#define	QTD_STS_XACT	(1 << 3)	/* device gave illegal response */
+#define	QTD_STS_MMF	(1 << 2)	/* incomplete split transaction */
+#define	QTD_STS_STS	(1 << 1)	/* split transaction state */
+#define	QTD_STS_PING	(1 << 0)	/* issue PING? */
+	__le32			hw_buf [5];        /* see EHCI 3.5.4 */
+	__le32			hw_buf_hi [5];        /* Appendix B */
+
+	/* the rest is HCD-private */
+	dma_addr_t		qtd_dma;		/* qtd address */
+	struct list_head	qtd_list;		/* sw qtd list */
+	struct urb		*urb;			/* qtd's urb */
+	size_t			length;			/* length of buffer */
+} __attribute__ ((aligned (32)));
+
+/* mask NakCnt+T in qh->hw_alt_next */
+#define QTD_MASK __constant_cpu_to_le32 (~0x1f)
+
+#define IS_SHORT_READ(token) (QTD_LENGTH (token) != 0 && QTD_PID (token) == 1)
+
+/*-------------------------------------------------------------------------*/
+
+/* type tag from {qh,itd,sitd,fstn}->hw_next */
+#define Q_NEXT_TYPE(dma) ((dma) & __constant_cpu_to_le32 (3 << 1))
+
+/* values for that type tag */
+#define Q_TYPE_ITD	__constant_cpu_to_le32 (0 << 1)
+#define Q_TYPE_QH	__constant_cpu_to_le32 (1 << 1)
+#define Q_TYPE_SITD	__constant_cpu_to_le32 (2 << 1)
+#define Q_TYPE_FSTN	__constant_cpu_to_le32 (3 << 1)
+
+/* next async queue entry, or pointer to interrupt/periodic QH */
+#define	QH_NEXT(dma)	(cpu_to_le32(((u32)dma)&~0x01f)|Q_TYPE_QH)
+
+/* for periodic/async schedules and qtd lists, mark end of list */
+#define	EHCI_LIST_END	__constant_cpu_to_le32(1) /* "null pointer" to hw */
+
+/*
+ * Entries in periodic shadow table are pointers to one of four kinds
+ * of data structure.  That's dictated by the hardware; a type tag is
+ * encoded in the low bits of the hardware's periodic schedule.  Use
+ * Q_NEXT_TYPE to get the tag.
+ *
+ * For entries in the async schedule, the type tag always says "qh".
+ */
+union ehci_shadow {
+	struct ehci_qh		*qh;		/* Q_TYPE_QH */
+	struct ehci_itd		*itd;		/* Q_TYPE_ITD */
+	struct ehci_sitd	*sitd;		/* Q_TYPE_SITD */
+	struct ehci_fstn	*fstn;		/* Q_TYPE_FSTN */
+	__le32			*hw_next;	/* (all types) */
+	void			*ptr;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.95 Section 3.6
+ * QH: describes control/bulk/interrupt endpoints
+ * See Fig 3-7 "Queue Head Structure Layout".
+ *
+ * These appear in both the async and (for interrupt) periodic schedules.
+ */
+
+struct ehci_qh {
+	/* first part defined by EHCI spec */
+	__le32			hw_next;	 /* see EHCI 3.6.1 */
+	__le32			hw_info1;        /* see EHCI 3.6.2 */
+#define	QH_HEAD		0x00008000
+	__le32			hw_info2;        /* see EHCI 3.6.2 */
+#define	QH_SMASK	0x000000ff
+#define	QH_CMASK	0x0000ff00
+#define	QH_HUBADDR	0x007f0000
+#define	QH_HUBPORT	0x3f800000
+#define	QH_MULT		0xc0000000
+	__le32			hw_current;	 /* qtd list - see EHCI 3.6.4 */
+
+	/* qtd overlay (hardware parts of a struct ehci_qtd) */
+	__le32			hw_qtd_next;
+	__le32			hw_alt_next;
+	__le32			hw_token;
+	__le32			hw_buf [5];
+	__le32			hw_buf_hi [5];
+
+	/* the rest is HCD-private */
+	dma_addr_t		qh_dma;		/* address of qh */
+	union ehci_shadow	qh_next;	/* ptr to qh; or periodic */
+	struct list_head	qtd_list;	/* sw qtd list */
+	struct ehci_qtd		*dummy;
+	struct ehci_qh		*reclaim;	/* next to reclaim */
+
+	struct ehci_hcd		*ehci;
+	struct kref		kref;
+	unsigned		stamp;
+
+	u8			qh_state;
+#define	QH_STATE_LINKED		1		/* HC sees this */
+#define	QH_STATE_UNLINK		2		/* HC may still see this */
+#define	QH_STATE_IDLE		3		/* HC doesn't see this */
+#define	QH_STATE_UNLINK_WAIT	4		/* LINKED and on reclaim q */
+#define	QH_STATE_COMPLETING	5		/* don't touch token.HALT */
+
+	/* periodic schedule info */
+	u8			usecs;		/* intr bandwidth */
+	u8			gap_uf;		/* uframes split/csplit gap */
+	u8			c_usecs;	/* ... split completion bw */
+	u16			tt_usecs;	/* tt downstream bandwidth */
+	unsigned short		period;		/* polling interval */
+	unsigned short		start;		/* where polling starts */
+#define NO_FRAME ((unsigned short)~0)			/* pick new start */
+	struct usb_device	*dev;		/* access to TT */
+} __attribute__ ((aligned (32)));
+
+/*-------------------------------------------------------------------------*/
+
+/* description of one iso transaction (up to 3 KB data if highspeed) */
+struct ehci_iso_packet {
+	/* These will be copied to iTD when scheduling */
+	u64			bufp;		/* itd->hw_bufp{,_hi}[pg] |= */
+	__le32			transaction;	/* itd->hw_transaction[i] |= */
+	u8			cross;		/* buf crosses pages */
+	/* for full speed OUT splits */
+	u32			buf1;
+};
+
+/* temporary schedule data for packets from iso urbs (both speeds)
+ * each packet is one logical usb transaction to the device (not TT),
+ * beginning at stream->next_uframe
+ */
+struct ehci_iso_sched {
+	struct list_head	td_list;
+	unsigned		span;
+	struct ehci_iso_packet	packet [0];
+};
+
+/*
+ * ehci_iso_stream - groups all (s)itds for this endpoint.
+ * acts like a qh would, if EHCI had them for ISO.
+ */
+struct ehci_iso_stream {
+	/* first two fields match QH, but info1 == 0 */
+	__le32			hw_next;
+	__le32			hw_info1;
+
+	u32			refcount;
+	u8			bEndpointAddress;
+	u8			highspeed;
+	u16			depth;		/* depth in uframes */
+	struct list_head	td_list;	/* queued itds/sitds */
+	struct list_head	free_list;	/* list of unused itds/sitds */
+	struct usb_device	*udev;
+	struct usb_host_endpoint *ep;
+
+	/* output of (re)scheduling */
+	unsigned long		start;		/* jiffies */
+	unsigned long		rescheduled;
+	int			next_uframe;
+	__le32			splits;
+
+	/* the rest is derived from the endpoint descriptor,
+	 * trusting urb->interval == f(epdesc->bInterval) and
+	 * including the extra info for hw_bufp[0..2]
+	 */
+	u8			interval;
+	u8			usecs, c_usecs;
+	u16			tt_usecs;
+	u16			maxp;
+	u16			raw_mask;
+	unsigned		bandwidth;
+
+	/* This is used to initialize iTD's hw_bufp fields */
+	__le32			buf0;
+	__le32			buf1;
+	__le32			buf2;
+
+	/* this is used to initialize sITD's tt info */
+	__le32			address;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.95 Section 3.3
+ * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
+ *
+ * Schedule records for high speed iso xfers
+ */
+struct ehci_itd {
+	/* first part defined by EHCI spec */
+	__le32			hw_next;           /* see EHCI 3.3.1 */
+	__le32			hw_transaction [8]; /* see EHCI 3.3.2 */
+#define EHCI_ISOC_ACTIVE        (1<<31)        /* activate transfer this slot */
+#define EHCI_ISOC_BUF_ERR       (1<<30)        /* Data buffer error */
+#define EHCI_ISOC_BABBLE        (1<<29)        /* babble detected */
+#define EHCI_ISOC_XACTERR       (1<<28)        /* XactErr - transaction error */
+#define	EHCI_ITD_LENGTH(tok)	(((tok)>>16) & 0x0fff)
+#define	EHCI_ITD_IOC		(1 << 15)	/* interrupt on complete */
+
+#define ITD_ACTIVE	__constant_cpu_to_le32(EHCI_ISOC_ACTIVE)
+
+	__le32			hw_bufp [7];	/* see EHCI 3.3.3 */
+	__le32			hw_bufp_hi [7];	/* Appendix B */
+
+	/* the rest is HCD-private */
+	dma_addr_t		itd_dma;	/* for this itd */
+	union ehci_shadow	itd_next;	/* ptr to periodic q entry */
+
+	struct urb		*urb;
+	struct ehci_iso_stream	*stream;	/* endpoint's queue */
+	struct list_head	itd_list;	/* list of stream's itds */
+
+	/* any/all hw_transactions here may be used by that urb */
+	unsigned		frame;		/* where scheduled */
+	unsigned		pg;
+	unsigned		index[8];	/* in urb->iso_frame_desc */
+	u8			usecs[8];
+} __attribute__ ((aligned (32)));
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.95 Section 3.4
+ * siTD, aka split-transaction isochronous Transfer Descriptor
+ *       ... describe full speed iso xfers through TT in hubs
+ * see Figure 3-5 "Split-transaction Isochronous Transaction Descriptor (siTD)
+ */
+struct ehci_sitd {
+	/* first part defined by EHCI spec */
+	__le32			hw_next;
+/* uses bit field macros above - see EHCI 0.95 Table 3-8 */
+	__le32			hw_fullspeed_ep;	/* EHCI table 3-9 */
+	__le32			hw_uframe;		/* EHCI table 3-10 */
+	__le32			hw_results;		/* EHCI table 3-11 */
+#define	SITD_IOC	(1 << 31)	/* interrupt on completion */
+#define	SITD_PAGE	(1 << 30)	/* buffer 0/1 */
+#define	SITD_LENGTH(x)	(0x3ff & ((x)>>16))
+#define	SITD_STS_ACTIVE	(1 << 7)	/* HC may execute this */
+#define	SITD_STS_ERR	(1 << 6)	/* error from TT */
+#define	SITD_STS_DBE	(1 << 5)	/* data buffer error (in HC) */
+#define	SITD_STS_BABBLE	(1 << 4)	/* device was babbling */
+#define	SITD_STS_XACT	(1 << 3)	/* illegal IN response */
+#define	SITD_STS_MMF	(1 << 2)	/* incomplete split transaction */
+#define	SITD_STS_STS	(1 << 1)	/* split transaction state */
+
+#define SITD_ACTIVE	__constant_cpu_to_le32(SITD_STS_ACTIVE)
+
+	__le32			hw_buf [2];		/* EHCI table 3-12 */
+	__le32			hw_backpointer;		/* EHCI table 3-13 */
+	__le32			hw_buf_hi [2];		/* Appendix B */
+
+	/* the rest is HCD-private */
+	dma_addr_t		sitd_dma;
+	union ehci_shadow	sitd_next;	/* ptr to periodic q entry */
+
+	struct urb		*urb;
+	struct ehci_iso_stream	*stream;	/* endpoint's queue */
+	struct list_head	sitd_list;	/* list of stream's sitds */
+	unsigned		frame;
+	unsigned		index;
+} __attribute__ ((aligned (32)));
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.96 Section 3.7
+ * Periodic Frame Span Traversal Node (FSTN)
+ *
+ * Manages split interrupt transactions (using TT) that span frame boundaries
+ * into uframes 0/1; see 4.12.2.2.  In those uframes, a "save place" FSTN
+ * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
+ * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
+ */
+struct ehci_fstn {
+	__le32			hw_next;	/* any periodic q entry */
+	__le32			hw_prev;	/* qh or EHCI_LIST_END */
+
+	/* the rest is HCD-private */
+	dma_addr_t		fstn_dma;
+	union ehci_shadow	fstn_next;	/* ptr to periodic q entry */
+} __attribute__ ((aligned (32)));
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_USB_EHCI_ROOT_HUB_TT
+
+/*
+ * Some EHCI controllers have a Transaction Translator built into the
+ * root hub. This is a non-standard feature.  Each controller will need
+ * to add code to the following inline functions, and call them as
+ * needed (mostly in root hub code).
+ */
+
+#define	ehci_is_TDI(e)			((e)->is_tdi_rh_tt)
+
+/* Returns the speed of a device attached to a port on the root hub. */
+static inline unsigned int
+ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
+{
+	if (ehci_is_TDI(ehci)) {
+		switch ((portsc>>26)&3) {
+		case 0:
+			return 0;
+		case 1:
+			return (1<<USB_PORT_FEAT_LOWSPEED);
+		case 2:
+		default:
+			return (1<<USB_PORT_FEAT_HIGHSPEED);
+		}
+	}
+	return (1<<USB_PORT_FEAT_HIGHSPEED);
+}
+
+#else
+
+#define	ehci_is_TDI(e)			(0)
+
+#define	ehci_port_speed(ehci, portsc)	(1<<USB_PORT_FEAT_HIGHSPEED)
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PPC_83xx
+/* Some Freescale processors have an erratum in which the TT
+ * port number in the queue head was 0..N-1 instead of 1..N.
+ */
+#define	ehci_has_fsl_portno_bug(e)		((e)->has_fsl_port_bug)
+#else
+#define	ehci_has_fsl_portno_bug(e)		(0)
+#endif
+
+/*
+ * While most USB host controllers implement their registers in
+ * little-endian format, a minority (celleb companion chip) implement
+ * them in big endian format.
+ *
+ * This attempts to support either format at compile time without a
+ * runtime penalty, or both formats with the additional overhead
+ * of checking a flag bit.
+ */
+
+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+#define ehci_big_endian_mmio(e)		((e)->big_endian_mmio)
+#else
+#define ehci_big_endian_mmio(e)		0
+#endif
+
+static inline unsigned int ehci_readl (const struct ehci_hcd *ehci,
+				       __u32 __iomem * regs)
+{
+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+	return ehci_big_endian_mmio(ehci) ?
+		readl_be(regs) :
+		readl(regs);
+#else
+	return readl(regs);
+#endif
+}
+
+static inline void ehci_writel (const struct ehci_hcd *ehci,
+				const unsigned int val, __u32 __iomem *regs)
+{
+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+	ehci_big_endian_mmio(ehci) ?
+		writel_be(val, regs) :
+		writel(val, regs);
+#else
+	writel(val, regs);
+#endif
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifndef DEBUG
+#define STUB_DEBUG_FILES
+#endif	/* DEBUG */
+
+/*-------------------------------------------------------------------------*/
+
+#endif /* __LINUX_EHCI_HCD_H */
diff -Nur linux-2.6.21.1/include/asm-mips/bootinfo.h linux-2.6.21.1-owrt/include/asm-mips/bootinfo.h
--- linux-2.6.21.1/include/asm-mips/bootinfo.h	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/include/asm-mips/bootinfo.h	2007-05-23 23:34:01.000000000 +0200
@@ -213,6 +213,17 @@
 #define MACH_GROUP_NEC_EMMA2RH 25	/* NEC EMMA2RH (was 23)		*/
 #define  MACH_NEC_MARKEINS	0	/* NEC EMMA2RH Mark-eins	*/
 
+
+/*
+ * Valid machtype for group ARUBA
+ */
+#define MACH_GROUP_ARUBA	23
+#define  MACH_ARUBA_UNKNOWN	0
+#define  MACH_ARUBA_AP60	1
+#define  MACH_ARUBA_AP65	2
+#define  MACH_ARUBA_AP70	3
+#define  MACH_ARUBA_AP40	4
+
 #define CL_SIZE			COMMAND_LINE_SIZE
 
 const char *get_system_type(void);
diff -Nur linux-2.6.21.1/include/asm-mips/cpu.h linux-2.6.21.1-owrt/include/asm-mips/cpu.h
--- linux-2.6.21.1/include/asm-mips/cpu.h	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/include/asm-mips/cpu.h	2007-05-23 23:34:01.000000000 +0200
@@ -54,6 +54,9 @@
 #define PRID_IMP_R14000		0x0f00
 #define PRID_IMP_R8000		0x1000
 #define PRID_IMP_PR4450		0x1200
+#define PRID_IMP_RC32334	0x1800
+#define PRID_IMP_RC32355	0x1900
+#define PRID_IMP_RC32365	0x1900
 #define PRID_IMP_R4600		0x2000
 #define PRID_IMP_R4700		0x2100
 #define PRID_IMP_TX39		0x2200
@@ -200,7 +203,8 @@
 #define CPU_SB1A		62
 #define CPU_74K			63
 #define CPU_R14000		64
-#define CPU_LAST		64
+#define CPU_RC32300		65
+#define CPU_LAST		65
 
 /*
  * ISA Level encodings
diff -Nur linux-2.6.21.1/include/asm-mips/mach-generic/irq.h linux-2.6.21.1-owrt/include/asm-mips/mach-generic/irq.h
--- linux-2.6.21.1/include/asm-mips/mach-generic/irq.h	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/include/asm-mips/mach-generic/irq.h	2007-05-23 23:35:55.000000000 +0200
@@ -9,7 +9,7 @@
 #define __ASM_MACH_GENERIC_IRQ_H
 
 #ifndef NR_IRQS
-#define NR_IRQS	128
+#define NR_IRQS	256
 #endif
 
 #ifdef CONFIG_I8259
diff -Nur linux-2.6.21.1/include/linux/kernel.h linux-2.6.21.1-owrt/include/linux/kernel.h
--- linux-2.6.21.1/include/linux/kernel.h	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1-owrt/include/linux/kernel.h	2007-05-23 23:34:01.000000000 +0200
@@ -334,6 +334,7 @@
 };
 
 /* Force a compilation error if condition is true */
+extern void BUILD_BUG(void);
 #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
 
 /* Force a compilation error if condition is true, but also produce a
diff -Nur linux-2.6.21.1/include/linux/kernel.h.orig linux-2.6.21.1-owrt/include/linux/kernel.h.orig
--- linux-2.6.21.1/include/linux/kernel.h.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.21.1-owrt/include/linux/kernel.h.orig	2007-04-27 23:49:26.000000000 +0200
@@ -0,0 +1,355 @@
+#ifndef _LINUX_KERNEL_H
+#define _LINUX_KERNEL_H
+
+/*
+ * 'kernel.h' contains some often-used function prototypes etc
+ */
+
+#ifdef __KERNEL__
+
+#include <stdarg.h>
+#include <linux/linkage.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/bitops.h>
+#include <linux/log2.h>
+#include <asm/byteorder.h>
+#include <asm/bug.h>
+
+extern const char linux_banner[];
+extern const char linux_proc_banner[];
+
+#define INT_MAX		((int)(~0U>>1))
+#define INT_MIN		(-INT_MAX - 1)
+#define UINT_MAX	(~0U)
+#define LONG_MAX	((long)(~0UL>>1))
+#define LONG_MIN	(-LONG_MAX - 1)
+#define ULONG_MAX	(~0UL)
+#define LLONG_MAX	((long long)(~0ULL>>1))
+#define LLONG_MIN	(-LLONG_MAX - 1)
+#define ULLONG_MAX	(~0ULL)
+
+#define STACK_MAGIC	0xdeadbeef
+
+#define ALIGN(x,a)		__ALIGN_MASK(x,(typeof(x))(a)-1)
+#define __ALIGN_MASK(x,mask)	(((x)+(mask))&~(mask))
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
+#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
+#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
+
+#define	KERN_EMERG	"<0>"	/* system is unusable			*/
+#define	KERN_ALERT	"<1>"	/* action must be taken immediately	*/
+#define	KERN_CRIT	"<2>"	/* critical conditions			*/
+#define	KERN_ERR	"<3>"	/* error conditions			*/
+#define	KERN_WARNING	"<4>"	/* warning conditions			*/
+#define	KERN_NOTICE	"<5>"	/* normal but significant condition	*/
+#define	KERN_INFO	"<6>"	/* informational			*/
+#define	KERN_DEBUG	"<7>"	/* debug-level messages			*/
+
+extern int console_printk[];
+
+#define console_loglevel (console_printk[0])
+#define default_message_loglevel (console_printk[1])
+#define minimum_console_loglevel (console_printk[2])
+#define default_console_loglevel (console_printk[3])
+
+struct completion;
+struct pt_regs;
+struct user;
+
+/**
+ * might_sleep - annotation for functions that can sleep
+ *
+ * this macro will print a stack trace if it is executed in an atomic
+ * context (spinlock, irq-handler, ...).
+ *
+ * This is a useful debugging help to be able to catch problems early and not
+ * be bitten later when the calling function happens to sleep when it is not
+ * supposed to.
+ */
+#ifdef CONFIG_PREEMPT_VOLUNTARY
+extern int cond_resched(void);
+# define might_resched() cond_resched()
+#else
+# define might_resched() do { } while (0)
+#endif
+
+#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
+  void __might_sleep(char *file, int line);
+# define might_sleep() \
+	do { __might_sleep(__FILE__, __LINE__); might_resched(); } while (0)
+#else
+# define might_sleep() do { might_resched(); } while (0)
+#endif
+
+#define might_sleep_if(cond) do { if (cond) might_sleep(); } while (0)
+
+#define abs(x) ({				\
+		int __x = (x);			\
+		(__x < 0) ? -__x : __x;		\
+	})
+
+extern struct atomic_notifier_head panic_notifier_list;
+extern long (*panic_blink)(long time);
+NORET_TYPE void panic(const char * fmt, ...)
+	__attribute__ ((NORET_AND format (printf, 1, 2)));
+extern void oops_enter(void);
+extern void oops_exit(void);
+extern int oops_may_print(void);
+fastcall NORET_TYPE void do_exit(long error_code)
+	ATTRIB_NORET;
+NORET_TYPE void complete_and_exit(struct completion *, long)
+	ATTRIB_NORET;
+extern unsigned long simple_strtoul(const char *,char **,unsigned int);
+extern long simple_strtol(const char *,char **,unsigned int);
+extern unsigned long long simple_strtoull(const char *,char **,unsigned int);
+extern long long simple_strtoll(const char *,char **,unsigned int);
+extern int sprintf(char * buf, const char * fmt, ...)
+	__attribute__ ((format (printf, 2, 3)));
+extern int vsprintf(char *buf, const char *, va_list)
+	__attribute__ ((format (printf, 2, 0)));
+extern int snprintf(char * buf, size_t size, const char * fmt, ...)
+	__attribute__ ((format (printf, 3, 4)));
+extern int vsnprintf(char *buf, size_t size, const char *fmt, va_list args)
+	__attribute__ ((format (printf, 3, 0)));
+extern int scnprintf(char * buf, size_t size, const char * fmt, ...)
+	__attribute__ ((format (printf, 3, 4)));
+extern int vscnprintf(char *buf, size_t size, const char *fmt, va_list args)
+	__attribute__ ((format (printf, 3, 0)));
+extern char *kasprintf(gfp_t gfp, const char *fmt, ...)
+	__attribute__ ((format (printf, 2, 3)));
+
+extern int sscanf(const char *, const char *, ...)
+	__attribute__ ((format (scanf, 2, 3)));
+extern int vsscanf(const char *, const char *, va_list)
+	__attribute__ ((format (scanf, 2, 0)));
+
+extern int get_option(char **str, int *pint);
+extern char *get_options(const char *str, int nints, int *ints);
+extern unsigned long long memparse(char *ptr, char **retptr);
+
+extern int core_kernel_text(unsigned long addr);
+extern int __kernel_text_address(unsigned long addr);
+extern int kernel_text_address(unsigned long addr);
+struct pid;
+extern struct pid *session_of_pgrp(struct pid *pgrp);
+
+extern void dump_thread(struct pt_regs *regs, struct user *dump);
+
+#ifdef CONFIG_PRINTK
+asmlinkage int vprintk(const char *fmt, va_list args)
+	__attribute__ ((format (printf, 1, 0)));
+asmlinkage int printk(const char * fmt, ...)
+	__attribute__ ((format (printf, 1, 2)));
+#else
+static inline int vprintk(const char *s, va_list args)
+	__attribute__ ((format (printf, 1, 0)));
+static inline int vprintk(const char *s, va_list args) { return 0; }
+static inline int printk(const char *s, ...)
+	__attribute__ ((format (printf, 1, 2)));
+static inline int printk(const char *s, ...) { return 0; }
+#endif
+
+unsigned long int_sqrt(unsigned long);
+
+extern int printk_ratelimit(void);
+extern int __printk_ratelimit(int ratelimit_jiffies, int ratelimit_burst);
+extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+				unsigned int interval_msec);
+
+static inline void console_silent(void)
+{
+	console_loglevel = 0;
+}
+
+static inline void console_verbose(void)
+{
+	if (console_loglevel)
+		console_loglevel = 15;
+}
+
+extern void bust_spinlocks(int yes);
+extern void wake_up_klogd(void);
+extern int oops_in_progress;		/* If set, an oops, panic(), BUG() or die() is in progress */
+extern int panic_timeout;
+extern int panic_on_oops;
+extern int panic_on_unrecovered_nmi;
+extern int tainted;
+extern const char *print_tainted(void);
+extern void add_taint(unsigned);
+
+/* Values used for system_state */
+extern enum system_states {
+	SYSTEM_BOOTING,
+	SYSTEM_RUNNING,
+	SYSTEM_HALT,
+	SYSTEM_POWER_OFF,
+	SYSTEM_RESTART,
+	SYSTEM_SUSPEND_DISK,
+} system_state;
+
+#define TAINT_PROPRIETARY_MODULE	(1<<0)
+#define TAINT_FORCED_MODULE		(1<<1)
+#define TAINT_UNSAFE_SMP		(1<<2)
+#define TAINT_FORCED_RMMOD		(1<<3)
+#define TAINT_MACHINE_CHECK		(1<<4)
+#define TAINT_BAD_PAGE			(1<<5)
+#define TAINT_USER			(1<<6)
+
+extern void dump_stack(void);
+
+#ifdef DEBUG
+/* If you are writing a driver, please use dev_dbg instead */
+#define pr_debug(fmt,arg...) \
+	printk(KERN_DEBUG fmt,##arg)
+#else
+static inline int __attribute__ ((format (printf, 1, 2))) pr_debug(const char * fmt, ...)
+{
+	return 0;
+}
+#endif
+
+#define pr_info(fmt,arg...) \
+	printk(KERN_INFO fmt,##arg)
+
+/*
+ *      Display an IP address in readable format.
+ */
+
+#define NIPQUAD(addr) \
+	((unsigned char *)&addr)[0], \
+	((unsigned char *)&addr)[1], \
+	((unsigned char *)&addr)[2], \
+	((unsigned char *)&addr)[3]
+#define NIPQUAD_FMT "%u.%u.%u.%u"
+
+#define NIP6(addr) \
+	ntohs((addr).s6_addr16[0]), \
+	ntohs((addr).s6_addr16[1]), \
+	ntohs((addr).s6_addr16[2]), \
+	ntohs((addr).s6_addr16[3]), \
+	ntohs((addr).s6_addr16[4]), \
+	ntohs((addr).s6_addr16[5]), \
+	ntohs((addr).s6_addr16[6]), \
+	ntohs((addr).s6_addr16[7])
+#define NIP6_FMT "%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x"
+#define NIP6_SEQFMT "%04x%04x%04x%04x%04x%04x%04x%04x"
+
+#if defined(__LITTLE_ENDIAN)
+#define HIPQUAD(addr) \
+	((unsigned char *)&addr)[3], \
+	((unsigned char *)&addr)[2], \
+	((unsigned char *)&addr)[1], \
+	((unsigned char *)&addr)[0]
+#elif defined(__BIG_ENDIAN)
+#define HIPQUAD	NIPQUAD
+#else
+#error "Please fix asm/byteorder.h"
+#endif /* __LITTLE_ENDIAN */
+
+/*
+ * min()/max() macros that also do
+ * strict type-checking.. See the
+ * "unnecessary" pointer comparison.
+ */
+#define min(x,y) ({ \
+	typeof(x) _x = (x);	\
+	typeof(y) _y = (y);	\
+	(void) (&_x == &_y);		\
+	_x < _y ? _x : _y; })
+
+#define max(x,y) ({ \
+	typeof(x) _x = (x);	\
+	typeof(y) _y = (y);	\
+	(void) (&_x == &_y);		\
+	_x > _y ? _x : _y; })
+
+/*
+ * ..and if you can't take the strict
+ * types, you can specify one yourself.
+ *
+ * Or not use min/max at all, of course.
+ */
+#define min_t(type,x,y) \
+	({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
+#define max_t(type,x,y) \
+	({ type __x = (x); type __y = (y); __x > __y ? __x: __y; })
+
+
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ * @ptr:	the pointer to the member.
+ * @type:	the type of the container struct this is embedded in.
+ * @member:	the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({			\
+        const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
+        (type *)( (char *)__mptr - offsetof(type,member) );})
+
+/*
+ * Check at compile time that something is of a particular type.
+ * Always evaluates to 1 so you may use it easily in comparisons.
+ */
+#define typecheck(type,x) \
+({	type __dummy; \
+	typeof(x) __dummy2; \
+	(void)(&__dummy == &__dummy2); \
+	1; \
+})
+
+/*
+ * Check at compile time that 'function' is a certain type, or is a pointer
+ * to that type (needs to use typedef for the function type.)
+ */
+#define typecheck_fn(type,function) \
+({	typeof(type) __tmp = function; \
+	(void)__tmp; \
+})
+
+struct sysinfo;
+extern int do_sysinfo(struct sysinfo *info);
+
+#endif /* __KERNEL__ */
+
+#define SI_LOAD_SHIFT	16
+struct sysinfo {
+	long uptime;			/* Seconds since boot */
+	unsigned long loads[3];		/* 1, 5, and 15 minute load averages */
+	unsigned long totalram;		/* Total usable main memory size */
+	unsigned long freeram;		/* Available memory size */
+	unsigned long sharedram;	/* Amount of shared memory */
+	unsigned long bufferram;	/* Memory used by buffers */
+	unsigned long totalswap;	/* Total swap space size */
+	unsigned long freeswap;		/* swap space still available */
+	unsigned short procs;		/* Number of current processes */
+	unsigned short pad;		/* explicit padding for m68k */
+	unsigned long totalhigh;	/* Total high memory size */
+	unsigned long freehigh;		/* Available high memory size */
+	unsigned int mem_unit;		/* Memory unit size in bytes */
+	char _f[20-2*sizeof(long)-sizeof(int)];	/* Padding: libc5 uses this.. */
+};
+
+/* Force a compilation error if condition is true */
+#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
+
+/* Force a compilation error if condition is true, but also produce a
+   result (of value 0 and type size_t), so the expression can be used
+   e.g. in a structure initializer (or where-ever else comma expressions
+   aren't permitted). */
+#define BUILD_BUG_ON_ZERO(e) (sizeof(char[1 - 2 * !!(e)]) - 1)
+
+/* Trap pasters of __FUNCTION__ at compile-time */
+#define __FUNCTION__ (__func__)
+
+/* This helps us to avoid #ifdef CONFIG_NUMA */
+#ifdef CONFIG_NUMA
+#define NUMA_BUILD 1
+#else
+#define NUMA_BUILD 0
+#endif
+
+#endif