summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2012-02-14[lantiq] Support booting the Speedport W502V using BRN-BOOT.blogic
While the disadvantage is less available flash space, it's easy and safe to flash without opening the device. Going back to the original firmware is also possible. This patch add two firmware utilities, mkbrncmdline and mkbrnboot. mkbrncmdline patches the uncompressed kernel so the registeres a0 to a3 are initialized and the memory size is passed in. mkbrnboot takes the lzma compressed kernel and squashfs images and creates a firmware image that can be flashed using the BRN-BOOT recovery kernel, which is booted by holding both buttons when powering up the device and will listen on http://192.168.2.1. The firmware file from bin/lantiq/ to use is openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage The BRN-BOOT recovery kernel does size-check the image, so if it's too big to fit into flash it will complain accordingly. A second patch is needed to make the wired network interface work since there is no u-boot to pre-initialise it. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12tools/genext2fs: do not include the host getline.h, it breaks the tool in ↵nbd
subtle ways, and the source already has a getline replacement git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30479 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-01[tools] automake: forcibly disable perl ithreads supportjow
The SDK when build on a machine with perl ithreads enabled will fail to run on many Gentoo systems because perl is usually built without thread capability there. In order to circumvent this issue forcibly disable the ithreads support, tested on CentOS 5.6, Ubuntu 10.04 LTS and Gentoo. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29979 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-28[tools] autoconf: another relocatability fix for autom4te, substitute ↵jow
hardcoded prefix with $STAGING_DIR when reading autom4te.cfg git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-28[tools] automake: generate relative aclocal symlinks in staging_dirjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29929 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-26firmware-utils/mkmylofw: add WPE72 supportjuhosg
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29913 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-21[tools] libtool: fix accidental sed invocation in libtoolizejow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29839 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-20[tools] quilt: some more relocatable fixes for quilt-internal scriptsjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-20[tools] bison: make yacc wrapper relocatablejow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29831 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-20[toolsÂ] autoconf: make bin/autoconf relocatable as welljow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29830 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-20[tools] quilt: make relocatable, search resources relative to STAGING_DIRjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29829 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-20[tools] automake: further relocation fixesjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29828 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-20[tools] autoconf: further relocation fixesjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29827 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-20[tools] libtool: make relocatable, search resources relative to STAGING_DIRjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29826 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-20[tools] autoconf: make relocatable by searching resources relative to ↵jow
STAGING_DIR git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-20[tools] automake: make relocatable by searching resources relative to ↵jow
STAGING_DIR git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-15tools: clean up Makefiles / make ccache workblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29754 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07firware-utils/mktplinkfw: add TL-WR2543N/ND supportjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04firmware-utils/mktplinkfw: add support for TL-WA701N/NDjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29655 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04firmware-utils/mktplinkfw: add support for TL-MR3020juhosg
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29650 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15firmware-utils/mktplinkfw: add ability to put jffs2 eof marker into the imagejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29544 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06tools/mktplinkfw: allow to specify hw_id, hw_rev and flash_layoutjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29466 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05firmware-utils/mktplinkfw: allow to align the rootfs on a specified boundaryjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29445 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05tools/mkimage: allow to use different magic in uImagesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29442 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03firmware-utils/mktplinkfw: fix combined image creationjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29409 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-28build: add a lib64 symlink in staging_dir/host and staging_dir/toolchain* ↵nbd
for systems that prefer this as library path (e.g. current SuSE), fixes mpfr and gcc build git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29352 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-24firmware-utils/mktplinfw: use htonl/ntohljuhosg
Based on a patch by Adrian Chadd <adrian@freebsd.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29327 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-23tools: use host build_dir instead of target build_dirnico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01firmware-utils/mktplinkfw: add TL-WR741ND v4juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-30[tools] Add firmware tool for generating factory images for Edimax devicesacinonyx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28688 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-26firmware-utils/mktplinkfw: fix hardware id of the TL-WR740 v3juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-21tools/lzma-old fix compile issues (patch from #10253)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28502 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-21[tools] upx: fix build errornico
g++ -O2 -Wall -W -Wcast-align -Wcast-qual -Wpointer-arith -Wshadow -Wwrite-strings -Werror -o compress.o -c compress.cpp cc1plus: warnings being treated as errors compress.cpp:75: error: unused parameter 'src' ... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28500 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-19squashfs4: Add support for LZMA Magic to unsquashfsjogo
Some vendor firmwares use a different super block magic to indicate LZMA compression. This patches adds support for detecting this and enable extraction for those firmware's root filesystems. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28489 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-12[tools]: add upx, but make it build only for ppc nowkaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28428 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21firmware-utils/mktplinkfw: add support for TL-WR703N v1juhosg
Patch-by: dongyuqi <729650915@qq.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21firmware-utils/mktplinkfw: add support for TL-WR743ND v1juhosg
Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28270 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21firmware-utils/mktplinkfw: add support for TL-WR740N v3juhosg
Signed-off-by: Martin Raykov <martin.raykov@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-05[tools] mkimage/getline.h - Mac OS X 10.7 (Lion) fixlars
This mends mkimage for getline() in Mac OS X 10.7. Signed-off-by: Joe Roback <openwrt-devel at roback.cc> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27917 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-05[tools] host/include/getline.h - Mac OS X 10.7 (Lion) fixlars
Apple has finally updated their version of Libc, and it now includes getline(). \o/ The following patch fixes OpenWRT getline.h to not redefine it for 10.7. The one caveat is, the includes (at least stdio.h) are needed before the #ifdef so that __DARWIN_C_LEVEL could be properly defined (it is not a compiler built-in define like __linux__ or __APPLE__). This one fixes the host/include/getline.h. The next patch will mend the mkimage package. Signed-off-by: Joe Roback <openwrt-devel at roback.cc> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27916 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-01tools/quilt: fix spurious calls to the configure and Makefile targets (#8462)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27869 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-01[include] autotools.mk: implement PKG_FIXUP:=patch-libtooljow
This change allows to apply OpenWrt, Buildroot and OE libtool fixes to packages which fail badly at autoreconf. The fixup covers the common libtool versions 1.5, 2.2 and 2.4 and automatically determines the correct version to use. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27855 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-31quilt: make it possible to override the path to getopt (based on patch from ↵nbd
#9842) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27852 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-31squashfs4: fix a compile error on big-endian systems (patch from #9842)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-31squashfs4: add missing include for freebsd (patch from #9842)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-24pkg-config: fix prefixnbd
Now: % PATH=./staging_dir/host/bin:$PATH STAGING_PREFIX=/test PKG_CONFIG_PATH=$(echo staging_dir/target-*/usr/lib/pkgconfig) ./staging_dir/host/bin/pkg-config --cflags lua -I/test//include After applying the patch: % PATH=./staging_dir/host/bin:$PATH STAGING_PREFIX=/test PKG_CONFIG_PATH=$(echo staging_dir/target-*/usr/lib/pkgconfig) ./staging_dir/host/bin/pkg-config --cflags lua -I/test/include I guess that there sould not be '//' but only one '/'. Signed-off-by: Luka Perkov < openwrt ->-to->- lukaperkov.net > git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27744 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-08firmware-utils: rename the devname variable in mkwrgimg to avoid a clash ↵nbd
with a BSD stdlib function git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-06tools/firmware-utils: add yet another buffalo tooljuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-06tools/firmware-utils: allow to create buffalo image from two filesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-06tools/firmware-utils: allow to create buffalo tags w/o hw versionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27472 3c298f89-4303-0410-b956-a3cf2f4a3e73