summaryrefslogtreecommitdiff
path: root/tools/firmware-utils
AgeCommit message (Collapse)Author
2014-01-25firmware-utils/mktplinkfw: allow to reserve space in the generated imagesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12ralink: don't build mkhilinkfw untilt he ssl header dependency is resolvedblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12firmware-utils: mkhilinkfw breaks the build botsblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-01-12firmware-utils: add HLK-RM04 toolblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39238 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-27firmware-utils: check_magic() in buffalo-lib.c always return 0blogic
spotted with cppcheck Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-15firmware-utils/mkplinkfw: add TL-WA801ND v2 supportjuhosg
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Patchwork: http://patchwork.openwrt.org/patch/4503/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39066 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-30firmware-utils/trx: remove trailing whitespacesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38963 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-30firmware-utils/trx: fix two bugsjuhosg
- fix crc32 calculation if -F was enabled. - don't convert the crc32 to little endian twice. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38962 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-29firmware-utils/mkplinkfw: add TL-WR1043ND v2 supportjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07tools: adapt addpattern for WD's Range Extenderjuhosg
A few things had to be changed to add support for these devices: - support code patterns with 8 characters - new board definition for the range extender device Patchwork: http://patchwork.openwrt.org/patch/4280/ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38685 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-06firmware-utils: remove the wndr3700 utilityjuhosg
It is not used anymore. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38663 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-20mkfwimage: Increase RSPRO maximum size to 0xF00000 (15 MiB)juhosg
RSPRO has 16MiB of Flash, using the following layout: [ 2.930000] 0x000000000000-0x000000030000 : "RedBoot" [ 2.940000] 0x000000030000-0x000000130000 : "kernel" [ 2.950000] 0x000000130000-0x000000ff0000 : "rootfs" [ 2.960000] 0x000000ff0000-0x000000fff000 : "FIS directory" [ 2.970000] 0x000000fff000-0x000001000000 : "RedBoot config" Firmware images contain kernel and rootfs, so they can use up to 0xFF0000 - 0x30000 = 0xFC0000 (15,75MiB) of space. We don't include the RedBoot and FIS partitions and leave an extra 0xC0000 (768KiB) of space. This is based on revision 18410 which sets the limit to 0xB00000 (11 MiB). Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38484 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-10-07tools: add tool to generate dcs93xl imagesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38317 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19firmware-utils/mktplinkfw: add support for the TL-MR13U boardjuhosg
Signed-off-by: Oleg Titov <oleg.titov@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4063/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-06firmware-utils: add a tool TP-Link v2 image generationblogic
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37726 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-06firmware-utils: remove v2 supportblogic
we will use gabors patch instead Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37725 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-06firmware-utils: fix segfault introduced by v2 changesblogic
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37724 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-06firmware-utils: add support for TDW8970 to mktplinkfwblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-06firmware-utils: add v2 header support to firmware-utilsblogic
only image build works. inspect and md5 checksum support are not implemented yet Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01ramips: add basics for Poray devicesblogic
This commit adds the basic elements to support Poray brand routers. It contains a tool to do the encryption/obfuscation that is used in Poray routers. Support for Poray devices was worked on by: Felix Kaechele <heffer@fedoraproject.org> Luis Soltero <lsoltero@globalmarinenet.com> Michel Stempin <michel.stempin@wanadoo.fr> Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-26firmware-utils/mktplinkfw: add support for the TL-MR10U boardjuhosg
Based on andelf's patch: http://andelf.diandian.com/post/2013-05-22/40050677370 Signed-off-by: Oleg Titov <oleg.titov@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3840/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-06tools: add Broadcom cable modem firmware image creatorflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36873 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08firmware-utils/mkcameofw: allow to use combined kernel imagejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36583 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30firmware-utils/mktplinkfw: add description for -W option into usage outputjuhosg
Add description for -W <hwrev> option into usage output of mktplinkfw. Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36497 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26firmware-utils/mktplinkfw: add support for the TL-WR720N v3 boardjuhosg
Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09[ramips] Add Netgear WNCE2001 (OF version)blogic
Add Netgear WNCE2001. This is a small RT3052 device with 4MB spi flash and 32MB ram. 2 built-in antennas, 1x fastE, no USB, reset & wps switch. On my model the AP/RT switch is unpopulated, but I verified the gpio mapping for it. The stock firmware is running an unprotected tftpd which allows you to read any file from the filesystem. Serial port is present on testpads (See image on the wiki page). There are more testpads below the shield near the SoC, which may have JTAG. Slight annoyance: The bootloader is checksumming kernel&rootfs, but can be tricked by zeroing checksum and length fields in the checksum partition, see target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming The manufacturer image is very similar to the DAP one, so I slightly modified mkdapimg to support generating it. The resulting openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin can be used to flash from stock to OpenWRT using the stock firmware upgrade function, without using the serial port. http://www.netgear.com/landing/wnce2001.aspx http://wiki.openwrt.org/toh/netgear/wnce2001 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11firmware-utils/mktplinkfw: Add support for MR3420v2juhosg
Patch-by: Dmytro <dioptimizer@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3441/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35963 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-25firmware-utils/mktplinkfw: add support for the TL-WA830RE v1/v2 boardsjuhosg
Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35787 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-13firmware-utils/mktplinkfw: add support for the TL-WDR4900 v1juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-02firmware-utils/mktplinkfw: add TP-LINK TL-WR743ND v2 supportjuhosg
AR9331 based, these same as 741v4 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35448 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-06[tools/firmware-utils] adds support for Edimax BR-6524Nblogic
fixes #12754 Signed-off-by: <rq@akl.lt> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35019 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19firmware-utils/mktplinkfw: add support for the TL-MR3220 v2juhosg
Based on the following patch: http://patchwork.openwrt.org/patch/3043/ Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34781 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-17firmware-utils/mkfwimage2: allow to use numbers in partition namesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34729 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-07firmware-utils/mktplinkfw: add support for TP-LINK WA801NDv1juhosg
Patch-by: Amir Sagie <openwrt-devel@taproot.org.il> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-13firmware-utils/mktplinkfw: add support for TL-WA7510Njuhosg
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch] Signed-off-by: Stefan Helmert <helst_listen@aol.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34189 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18firmware-utils: new tool for fixing U-Media firmware headersjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18tools/firmware-utils: add seama tooljuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-08firmware-utils: move bcm_tag.h herejogo
Since there is only one user of bcm_tag.h left, we can safely move it into the firmware-utils directory, replacing the symlink. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33655 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22tools/firmware-utils: add a new tool for TEW-712BR firmware generationjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33233 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22[tools] tools/firmware-utils/ptgen option to use MB roundingblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33218 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-17tools/firmware-utils: add tool for DIR-651-H1 firmware generationjuhosg
Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-12[tools] use HOST_STATIC_LINKING instead of hardcoding -staticjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33140 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-10[tools] firmware-utils: link staticallyjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33117 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24[tools] adds mkdapimgblogic
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05firmware-utils/mktplinkfw: allow to specify firmware versionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27tools: imagetag: add parameter for padding imagesjogo
Allow images to be padded to a certain size. This prevents CFE from flashing them to the second image offset. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31875 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05firmware-utils/mktplinkfw: add support for the TL-WR1041N v2juhosg
Patch-by: Vince Huang <axishero@foxmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31609 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-18firmware-utils/mkfwimage: allow to override firmware magicjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[lantiq] Support booting the Speedport W502V using BRN-BOOT.blogic
While the disadvantage is less available flash space, it's easy and safe to flash without opening the device. Going back to the original firmware is also possible. This patch add two firmware utilities, mkbrncmdline and mkbrnboot. mkbrncmdline patches the uncompressed kernel so the registeres a0 to a3 are initialized and the memory size is passed in. mkbrnboot takes the lzma compressed kernel and squashfs images and creates a firmware image that can be flashed using the BRN-BOOT recovery kernel, which is booted by holding both buttons when powering up the device and will listen on http://192.168.2.1. The firmware file from bin/lantiq/ to use is openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage The BRN-BOOT recovery kernel does size-check the image, so if it's too big to fit into flash it will complain accordingly. A second patch is needed to make the wired network interface work since there is no u-boot to pre-initialise it. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-26firmware-utils/mkmylofw: add WPE72 supportjuhosg
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29913 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 10:22:35 +0000