summaryrefslogtreecommitdiff
path: root/tools/firmware-utils
AgeCommit message (Collapse)Author
2012-08-17tools/firmware-utils: add tool for DIR-651-H1 firmware generationjuhosg
Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-12[tools] use HOST_STATIC_LINKING instead of hardcoding -staticjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33140 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-10[tools] firmware-utils: link staticallyjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33117 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24[tools] adds mkdapimgblogic
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-05firmware-utils/mktplinkfw: allow to specify firmware versionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27tools: imagetag: add parameter for padding imagesjogo
Allow images to be padded to a certain size. This prevents CFE from flashing them to the second image offset. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31875 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-05firmware-utils/mktplinkfw: add support for the TL-WR1041N v2juhosg
Patch-by: Vince Huang <axishero@foxmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31609 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-18firmware-utils/mkfwimage: allow to override firmware magicjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[lantiq] Support booting the Speedport W502V using BRN-BOOT.blogic
While the disadvantage is less available flash space, it's easy and safe to flash without opening the device. Going back to the original firmware is also possible. This patch add two firmware utilities, mkbrncmdline and mkbrnboot. mkbrncmdline patches the uncompressed kernel so the registeres a0 to a3 are initialized and the memory size is passed in. mkbrnboot takes the lzma compressed kernel and squashfs images and creates a firmware image that can be flashed using the BRN-BOOT recovery kernel, which is booted by holding both buttons when powering up the device and will listen on http://192.168.2.1. The firmware file from bin/lantiq/ to use is openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage The BRN-BOOT recovery kernel does size-check the image, so if it's too big to fit into flash it will complain accordingly. A second patch is needed to make the wired network interface work since there is no u-boot to pre-initialise it. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-26firmware-utils/mkmylofw: add WPE72 supportjuhosg
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29913 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-15tools: clean up Makefiles / make ccache workblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29754 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-07firware-utils/mktplinkfw: add TL-WR2543N/ND supportjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04firmware-utils/mktplinkfw: add support for TL-WA701N/NDjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29655 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04firmware-utils/mktplinkfw: add support for TL-MR3020juhosg
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29650 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15firmware-utils/mktplinkfw: add ability to put jffs2 eof marker into the imagejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29544 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06tools/mktplinkfw: allow to specify hw_id, hw_rev and flash_layoutjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29466 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05firmware-utils/mktplinkfw: allow to align the rootfs on a specified boundaryjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29445 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03firmware-utils/mktplinkfw: fix combined image creationjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29409 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-24firmware-utils/mktplinfw: use htonl/ntohljuhosg
Based on a patch by Adrian Chadd <adrian@freebsd.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29327 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-01firmware-utils/mktplinkfw: add TL-WR741ND v4juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-30[tools] Add firmware tool for generating factory images for Edimax devicesacinonyx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28688 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-26firmware-utils/mktplinkfw: fix hardware id of the TL-WR740 v3juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28602 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21firmware-utils/mktplinkfw: add support for TL-WR703N v1juhosg
Patch-by: dongyuqi <729650915@qq.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21firmware-utils/mktplinkfw: add support for TL-WR743ND v1juhosg
Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28270 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21firmware-utils/mktplinkfw: add support for TL-WR740N v3juhosg
Signed-off-by: Martin Raykov <martin.raykov@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-08firmware-utils: rename the devname variable in mkwrgimg to avoid a clash ↵nbd
with a BSD stdlib function git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-06tools/firmware-utils: add yet another buffalo tooljuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-06tools/firmware-utils: allow to create buffalo image from two filesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-06tools/firmware-utils: allow to create buffalo tags w/o hw versionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-04tools/firmware-utils: add new firmware tool for the DIR-300-B1 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27438 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-21firmware-utils: fix build on big endian systemshauke
This closes #9446 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-13tools/firmware-utils: fix buffalo csum calculationjuhosg
Also print an error message if decryption fails. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27167 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31tools/firmware-utils: add support for hd_id tag into mkdniimgjuhosg
Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27052 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31tools/firmware-utils: add buffalo specific fw toolsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27050 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11bcm63xx: Add firmware helpers for T-Home Speedport W 303Vflorian
Add two helpers for generating correctly tagged images for the T-Home Speedport W 303V Typ B as well as xor'd ones as required by CFE. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-15bcm63xx: Move the OpenWrt rootfs length fieldcshore
Dual image capable CFEs store an image sequence at the same place as currently OpenWrt stores the actual rootfs length, so it will get overwritten when flashing through such a CFE. To prevent this from happening, move the rootfs length field to the next four bytes, thus completely using the reserved1 field. Since the reserved1 field is now completely in use, it does not make sense to allow it to be set from the imagetag utility, so remove the option. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-09firmware-utils: fix endianness bugs in firmware generation program.hauke
Should make it work on big endian systems again, I do not have such a system. This closes #9093. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26543 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13firmware-utils/mktplinkfw: add support for the TP-Link TL-WA901ND v2 boardjuhosg
Patch-by: Jonathan Benett <jbscience87@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-12brcm47xx: fix error when build firmware on x86_64 host (closes #7672)hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-14firmware-utils/mkdniimg: don't use NA region by defaultjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-14firmware-utils/wndr3700: allow to specify image magic via command linejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-26Added OpenWRT-specific field to imagetag so that we can record the real root ↵cshore
length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size. Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24838 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-23ar71xx: add support for TL-WR740N v1juhosg
Same as TL-WR741ND but with different hardware ID and without detachable antenna. Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24811 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17firmware-utils/mkzynfw: fix available flash space calculationjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10firmware-utils/mktplinkfw: add support for the TL-MR3220 v1juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24438 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-02brcm47xx: Add edimax PS1208mfg supporthauke
Thank you clemvangelis for the patches. (closes #7672) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag ↵cshore
writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-15[tools] brcm63xx: imagetag: Fixed occaisonal wrong CRC in image due to using ↵cshore
strncpy to copy the CRC into the imagetag. strncpy stops copying after a 00 byte, memcpy doesn't. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27firmware-utils/mktplinkfw: add support for the TL-MR3420 v1juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27firmware-utils/mktplinkfw: add support for the TL-WR841N v7juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23133 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-27 13:38:37 +0000