summaryrefslogtreecommitdiff
path: root/tools/firmware-utils
AgeCommit message (Collapse)Author
2011-06-13tools/firmware-utils: fix buffalo csum calculationjuhosg
Also print an error message if decryption fails. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27167 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31tools/firmware-utils: add support for hd_id tag into mkdniimgjuhosg
Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27052 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31tools/firmware-utils: add buffalo specific fw toolsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27050 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11bcm63xx: Add firmware helpers for T-Home Speedport W 303Vflorian
Add two helpers for generating correctly tagged images for the T-Home Speedport W 303V Typ B as well as xor'd ones as required by CFE. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-15bcm63xx: Move the OpenWrt rootfs length fieldcshore
Dual image capable CFEs store an image sequence at the same place as currently OpenWrt stores the actual rootfs length, so it will get overwritten when flashing through such a CFE. To prevent this from happening, move the rootfs length field to the next four bytes, thus completely using the reserved1 field. Since the reserved1 field is now completely in use, it does not make sense to allow it to be set from the imagetag utility, so remove the option. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-09firmware-utils: fix endianness bugs in firmware generation program.hauke
Should make it work on big endian systems again, I do not have such a system. This closes #9093. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26543 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13firmware-utils/mktplinkfw: add support for the TP-Link TL-WA901ND v2 boardjuhosg
Patch-by: Jonathan Benett <jbscience87@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-12brcm47xx: fix error when build firmware on x86_64 host (closes #7672)hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-14firmware-utils/mkdniimg: don't use NA region by defaultjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-14firmware-utils/wndr3700: allow to specify image magic via command linejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-26Added OpenWRT-specific field to imagetag so that we can record the real root ↵cshore
length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size. Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24838 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-23ar71xx: add support for TL-WR740N v1juhosg
Same as TL-WR741ND but with different hardware ID and without detachable antenna. Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24811 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17firmware-utils/mkzynfw: fix available flash space calculationjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-10firmware-utils/mktplinkfw: add support for the TL-MR3220 v1juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24438 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-02brcm47xx: Add edimax PS1208mfg supporthauke
Thank you clemvangelis for the patches. (closes #7672) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag ↵cshore
writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-15[tools] brcm63xx: imagetag: Fixed occaisonal wrong CRC in image due to using ↵cshore
strncpy to copy the CRC into the imagetag. strncpy stops copying after a 00 byte, memcpy doesn't. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27firmware-utils/mktplinkfw: add support for the TL-MR3420 v1juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27firmware-utils/mktplinkfw: add support for the TL-WR841N v7juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-04Zcomax device firmware tool endianness fixmb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-03tools/firmware-utils: new tool for the Zcomax devicesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-06brcm47xx: Add new image generation and fix leds/reset button on WNR834B V2hauke
Thank you realopty for the patch. tools/firmware-utils/src/mkchkimg.c is from http://www.myopenrouter.com/download/10611/mkchkimg/ This closes #7702. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22516 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-30mostly revert commit r22396hauke
CFE does not boot images generated with these checksums because of wrong checksum. After flashing then with tftp to my Asus wl500-GPv1 the following messages are show: Null Rescue Flag. Boot program checksum is invalid Hello!! Enter Rescue Mode: (Check error) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22418 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-29firmware-utils/trx: Endianness fixesmb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22414 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-27firmware-utils: The option -F was not detected.hauke
This was missing in r22396 This fixes build of brcm47xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22398 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-27fix CRC32 calculation for sysupgrademarkus
* reduce image size for CRC calculation by fs_mark size sysupgrade sometimes failed for me and I noticed that it was due to incorrect CRC values in trx-header after performing it. It seems that the fs_mark was completely included in the calculation and that it was nevertheless modified by sysupgrade while appending the jffs data. This only occurs for the first boot after sysupgrade as the flashmap driver recalculates the CRC to an even smaller area when it boots. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-13tools/firmware-utils: enhance mktplinkfw utilityjuhosg
Attached patch enhances the mktplinkfw utility: 1. existing firmware files in TP-Link format can now be inspected, showing eg. the used offsets 2. optionally the kernel and rootfs parts can be extracted (saves calculations for dd) 3. when generating firmwares, kernel entry point, load address and rootfs offset can be overwritten (for experienced users) Patch-by: Pieter "Fate" Hollants <pieter@hollants.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22169 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-01firmware-utils/mktplinkfw: add support for the TL-WA901NDjuhosg
Patch-by: Pieter "Fate" Hollants <pieter@hollants.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-01preset stable and try* flags for TRX2 headersmarkus
* changed addpattern.c to preset the stable and try flags used in TRXv2 images to dupe CFE and pretend a stable image. * changed trx.c to calculate TRXv2 CRC with stable and try flags set to 0xFF like CFE does on startup * fixed compile warnings in trx.c by explicit casting git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22012 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-28fixed trx version to handlingmarkus
I forgot to write the right trx version to the actual header... git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21986 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-20[tools] remove whitespaces in imagetag toolflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-14Revert r21806 there are no users of it yetflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-14[tools] add hcsmakeimage, for cable modems/routers based on bcm33xxflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-12[tools] fix mktitanimg segfault on 64-bits hosts (#7443)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21767 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-06[tools] add mktitanimg to create Titan (AR7-based) images (#6632)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21689 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-16get rid of CRLF encoding in various filesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-14firmware-utils/mkzynfw: add support for the NBG460N boardjuhosg
Adding NBG460N/550N/550NH boards to mkzynfw. Signed-off-by: Michael Kurz <michi.kurz@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-14firmware-utils/mkzynfw: don't use next_offset twice (closes #7273)juhosg
The test if a file can fit in an image considers the current offset twice. So a image that would fit is too big. Thanks-to: Michael Kurz <michi.kurz@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21445 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-26tools/firmware-utils: add size check to the mkplanexfw tooljuhosg
Also pad the image to a 64K boundary. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21174 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-12[cleanup] remove 'svn:executable' propertynico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20831 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-01[brcm63xx] flashmap and image generation: reduced union bcm_tag to a single ↵florian
struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-28[brcm63xx] move bcm_tag.h out of the flashmap patch so that user-land tools ↵florian
can re-use it git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-27firmware-utils/trx: add relative offset parameterjuhosg
* will be used for the WRT160NL board * patch by Bernhard Loos * note: rejected parts has been fixed git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20522 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-26[tools] revert r18760 since it prevents people from building working eva imagesflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20437 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-25added support for wrt54g3gv2-vf and new trx header formatmarkus
- hacked addpattern due to changes in header format - added "-5" to addpattern, some 0xFF are needed for trx2 header "-4" broke CRC checking in CFE - hacked trx.c due to new header format version - added target to create trx-V2 images the flashmap driver possibly needs to be customized. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-18[tools] fix file creation mode, thanks rtzflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-10mktplinkfw: add option to strip padding from the end of the imagejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20120 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-08mktplinkfw: fix help string, and remove duplicated optionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20067 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-19firmware-utils/mktplinkfw: add board definitions for TL-WR941ND v4juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19748 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-01[tools] firmware-utils: unify cc and cc2 macros, simplifies Makefilejow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19487 3c298f89-4303-0410-b956-a3cf2f4a3e73