summaryrefslogtreecommitdiff
path: root/tools/firmware-utils/Makefile
AgeCommit message (Collapse)Author
2012-02-14[lantiq] Support booting the Speedport W502V using BRN-BOOT.blogic
While the disadvantage is less available flash space, it's easy and safe to flash without opening the device. Going back to the original firmware is also possible. This patch add two firmware utilities, mkbrncmdline and mkbrnboot. mkbrncmdline patches the uncompressed kernel so the registeres a0 to a3 are initialized and the memory size is passed in. mkbrnboot takes the lzma compressed kernel and squashfs images and creates a firmware image that can be flashed using the BRN-BOOT recovery kernel, which is booted by holding both buttons when powering up the device and will listen on http://192.168.2.1. The firmware file from bin/lantiq/ to use is openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage The BRN-BOOT recovery kernel does size-check the image, so if it's too big to fit into flash it will complain accordingly. A second patch is needed to make the wired network interface work since there is no u-boot to pre-initialise it. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-15tools: clean up Makefiles / make ccache workblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29754 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-30[tools] Add firmware tool for generating factory images for Edimax devicesacinonyx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28688 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-06tools/firmware-utils: add yet another buffalo tooljuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-04tools/firmware-utils: add new firmware tool for the DIR-300-B1 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27438 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-31tools/firmware-utils: add buffalo specific fw toolsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27050 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11bcm63xx: Add firmware helpers for T-Home Speedport W 303Vflorian
Add two helpers for generating correctly tagged images for the T-Home Speedport W 303V Typ B as well as xor'd ones as required by CFE. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-02brcm47xx: Add edimax PS1208mfg supporthauke
Thank you clemvangelis for the patches. (closes #7672) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag ↵cshore
writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-03tools/firmware-utils: new tool for the Zcomax devicesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-06brcm47xx: Add new image generation and fix leds/reset button on WNR834B V2hauke
Thank you realopty for the patch. tools/firmware-utils/src/mkchkimg.c is from http://www.myopenrouter.com/download/10611/mkchkimg/ This closes #7702. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22516 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-14Revert r21806 there are no users of it yetflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-14[tools] add hcsmakeimage, for cable modems/routers based on bcm33xxflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-06[tools] add mktitanimg to create Titan (AR7-based) images (#6632)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21689 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-01[tools] firmware-utils: unify cc and cc2 macros, simplifies Makefilejow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-01[tools] firmware-utils: copy bcm_tag.h to src/ and get rid of cc3 macro, ↵jow
fixes imagetag compilation git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19485 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-28ar71xx: create images for the WNDR3700, which can be flashed via the factory ↵juhosg
web interface git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-28firmware-utils: add WNDR3700 image fixing tool (thanks to Anael Orlinski)juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-12[tools] firmware-utils: add new tool for the wrt400n (based on a patch by ↵juhosg
Sandeep Mistry <sandeep.mistry at gmail.com>) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16792 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-25[tools] firmware-utils: add a tool to compute crc value for the 5gxi firmwarejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-24[tools] firmware-utils: add a file {en,de}cryption tool, based on the PC1 ↵juhosg
encryption algrithm git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-14firmware-utils: add a small utility for generating nand flash images with ↵nbd
ecc info git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-09[brcm63xx] rework imagetag firmware generator and MTD partition parser to ↵florian
accomodate with all known imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16393 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-22tools/firmware-utils: Added encode_crc, for Freecom devices.rwhitby
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14961 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-26[tools] firmware-utils: add new firmware generation tool for the TP-LINK ↵juhosg
TL-WR941ND device git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-22build system refactoring in preparation for allowing packages to do ↵nbd
host-build steps git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14610 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-04[tools] firmware-utils/mkplanexfw: new firmware generation tool for the ↵juhosg
Planex MZK-W04NU device git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-28Add makeamitbin to generate images for other RDC-based devices, thanks sn9 !florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13056 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-13[tools] firmware-utils: new firmware generation tool for the WILIGEAR WBD-111juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-27replacement of the add_header utility used by various vendorskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11588 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18bcm963xx: add cfe image tagging utilitynbd
This replaces the proprietary bcmImageBuilder program from the Broadcom source drops. It basically adds a 256 bytes header in front of the kernel + rootfs which contains a few text signatures, the locations of the data as well as the checksums of the data and the tag. It also adds a 12 bytes header in front of the LZMA kernel which contains the load address, kernel entry and the size of the compressed LZMA data. Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11170 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-07buld images for the Ubiquiti LiteStation and NanoStation ported from ↵thepeople
http://atheros.openwrt.net. Tested on a Nanostation 2 with airos 3 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-29[tools] firmware-utils: new firmware generation tool for the Cellvision ↵juhosg
CAS-6xx/NFS-xxx devices git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10306 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09Use $(CP) instead of $(INSTALL_BIN) for binaries.nbd
Signed-off-by: Andy Boyett <agb-openwrt@padded-cell.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-22ar7: add eva image generation (thanks Axel Gembe)ejka
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9401 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-07build system cleanup/restructuring as described in ↵nbd
http://lists.openwrt.org/pipermail/openwrt-devel/2007-August/001159.html git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8362 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-02add firmware generation tool for ZyXEL boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8318 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-05-10host-build.mk used incorrectlymbm
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7156 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-04-03Remove useless mksyshdr utility, replaced by mkcsysimg, Edimax images are no ↵florian
longer broken, and have been tested git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-04-02Add ADM5120 based edimax image generation utilitiesflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-22Add firmware generation for other Compex boards based on myloader, thanks to ↵florian
Juhos Gabor ! git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6640 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-21Add image generation for edimax routersflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-18Add srec2bin to firmware-utilsejka
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-12-11Add airlink firmware generation tool, thanks to Vassily Galinsky for that !florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5760 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-12-07remove custom partition table hack, add ptgen utility for generating ↵nbd
partition tables git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5704 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-12-06move target/utils to tools/firmware-utilsnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5702 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 21:57:00 +0000