summaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2013-09-10kernel: fix arch-dependent bug in hso modulenbd
Currently, the module causes an oops at least on rt5350. These patches have been accepted upstream at: git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-07brcm47xx: add me as maintainerhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37916 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-07ar71xx: use the lzma loader for the WRT160NLjuhosg
Partition layout before: 0x000000040000-0x0000001a0000 : "kernel" 0x0000001a0000-0x0000007e0000 : "rootfs" mtd: partition "rootfs" set to be root filesystem mtd: partition "rootfs_data" created automatically, ofs=0x350000, len=0x490000 0x000000350000-0x0000007e0000 : "rootfs_data" after: 0x000000040000-0x000000140000 : "kernel" 0x000000140000-0x0000007e0000 : "rootfs" mtd: partition "rootfs" set to be root filesystem mtd: partition "rootfs_data" created automatically, ofs=0x2f0000, len=0x4f0000 0x0000002f0000-0x0000007e0000 : "rootfs_data" Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37915 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-07ppc40x: remove 3.8 supportjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37914 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-07ppc40x: switch to 3.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37913 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-07ppc40x: add support for 3.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37912 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-06brcm63xx: drop linux 3.9 supportjogo
It is EOL since quite a while, so no need to keep it around. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-06brcm63xx: switch to linux 3.10jogo
3.10 is stable enough, and 3.9 is EOL since a while. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05kernel: b53: support phy ids for BCM5365jogo
BCM5365 (and probably other older variants) use a different phy id, so the phy driver never attached for them. Fix this by adding the appropriate phy id to the fixup and the phy driver. Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05Add missing symbolkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37897 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-04kernel: b53: allow access the MIB counters on BCM5365hauke
b53_no_ops has no elements and b53_port_ops has one element, this makes the code access some random memory when trying to access the mib counter functions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-03ar71xx: fix NetGear initramfs image namesjuhosg
The '-initramfs' string is duplicated in the image names, fix it. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02kernel: update 3.10 to 3.10.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: reorder Image/Build/* macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: simplify more oneliner macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: simplify oneliner loader macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: simplify oneliner initramfs macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37886 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: simplify oneliner buildkernel macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02mcs814x: dlan-usb-extender: fix usbdev triggerflorian
Every device I connect to the USB port is detected as 2-1, not 1-1. So adjust the default setting accordingly. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: optimize kernel generationjuhosg
When the squashfs and jffs2 images are generated in the same turn, the compressed kernel images are generated twice with the same parameters. Move compressed kernel generation into a separate phase to avoid that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02generic: remove linux version checks from myloader.cjuhosg
The myloader partition parser code uses ifdef wrappers to make the code usable on kernels below version 3.2. All targets are using kernel 3.3 at least so the wraper is not needed. Remove that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: dynamically generate Image/Build/Template/* macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: configure OBS4 line on TL-WR841N-v8/MR3420v2juhosg
It also fixes USB Power on MR3420v2. This time we took the information from the source of GPL: http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg18970.html Confirmed and tested: https://dev.openwrt.org/ticket/13201#comment:41 Thanks to oguretsagressive for testing. Signed-off-by: Dmytro <dioptimizer@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: remove fs_* variables from image/Makefilejuhosg
Those are not needed since we are generating the initramfs images along with the others. Remove the variables and use the template names directly. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: fix initramfs image generation for Cameo933x profilesjuhosg
Initramfs images are not generated for profiles which are using the squashfs-only template. Add the missing 'Image/Build/Template/squashfs-only/initramfs' to fix that. Also, 'Image/Build/Cameo933x/initramfs' uses wrong parameters for 'MkuImageLzma/initramfs' due to a misplaced commma. Remove that to fix the generated initramfs images. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02x86/alix2: remove kernel config for 3.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37870 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02x86/alix2: switch to 3.10.9juhosg
Taken from the 'alix2: update to LINUX_VERSION 3.10.9' patch: http://patchwork.openwrt.org/patch/3971/. Russell says in the original patch: "Initial whack at updating alix2 to a current kernel. It builds and runs without problems so far. I copied target/linux/config-3.8, target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to their 3.10 equivalents and tweaked until it built. The patches required no changes." Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37869 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02x86/alix2: add kernel config for 3.10juhosg
Taken from the 'alix2: update to LINUX_VERSION 3.10.9' patch: http://patchwork.openwrt.org/patch/3971/. Russell says in the original patch: "Initial whack at updating alix2 to a current kernel. It builds and runs without problems so far. I copied target/linux/config-3.8, target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to their 3.10 equivalents and tweaked until it built. The patches required no changes." The current patch contains additional configuration tweaks. Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37868 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02x86: add support for 3.10juhosg
Add kernel configuration and patches for Linux 3.10. Taken from the 'alix2: update to LINUX_VERSION 3.10.9' patch: http://patchwork.openwrt.org/patch/3971/. Russell says in the original patch: "Initial whack at updating alix2 to a current kernel. It builds and runs without problems so far. I copied target/linux/config-3.8, target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to their 3.10 equivalents and tweaked until it built. The patches required no changes." The current patch contains additional configuration tweaks, and the kernel patches were refreshed. Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37867 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-29imx6: add uboot-envtools to default packagesluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37859 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-28mvebu: remove maintainer ship roleflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37855 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-28kernel: fix booting issues on imx23 and imx6 targetsnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37854 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-28imx6: disable sdma until license issues are solvedluka
Also, synchronize patches with upstream. Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37853 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-28imx6: refresh 3.10 kernel configluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-27ar71xx: add some pending patchesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-27kernel: don't hide the 'Warning: unable to open an initial console' messagejuhosg
The 'Warning: unable to open an initial console' message indicates an error in the rootfs. Remove the patch which hides the warning. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-27kernel: ensure that /dev/console exists in initramfsjuhosg
Linux expects that the /dev/console node is present in the rootfs image. Create the node in initramfs, in order to make std{in,out,err} usable even in early init process. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-27ar71xx: don't hardwire cpu_has_dsp{,2} to zerojuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-27ar71xx: don't register USB device on WNDAP360juhosg
Apparently registering usb device on newest trunk causes this AP not to boot... Since there is no USB socket in that device anyway this can be simply removed (and device boots then no problem). [juhosg: - tweak subject line and description, - remove #include "dev-usb.h", - remove 'select ATH79_DEV_USB' from Kconfig] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-26kernel: fixing a potential deadlock in block2mtd for kernel 3.6/3.8/3.9nbd
Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-25x86/alix2: add kmod-usb2-pci to default packagesjuhosg
The USB controller is sitting on the PCI bus and without the package the EHCI controller is not usable. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-24ar71xx: build factory image for DIR-505 A1juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-24ar71xx: allow to override kernel size in the CameoHornet profilejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37833 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-23kernel: update 3.10 to 3.10.9juhosg
Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37832 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-23generic: refresh kernel configs with kconfig.pljuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37831 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-23ramips: remove lantiq specific patchesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37830 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-23ramips: use correct image size parameter for DIR-610 A1juhosg
Fixes the following error: bash: line 0: [: ralink_default_fw_size_4M: integer expression expected Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37829 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-23ramips: use correct parameters in the Seama templatejuhosg
Fixes DIR-645 image generation errors: bash: line 0: [: wrgn39_dlob.hans_dir645: integer expression expected ... bash: wrgn39_dlob.hans_dir645 - 64: syntax error: invalid arithmetic operator (error token is ".hans_dir645 - 64") make[4]: *** [install] Error 1 Signed-off-by: Michael Lee <igvtee@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37828 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-23ramips: update the RT3883 PCI patchjuhosg
Fix the following warning: arch/mips/pci/pci-rt3883.c: In function 'rt3883_pci_probe': arch/mips/pci/pci-rt3883.c:458:4: warning: use of 'h' length modifier with 'a' type character [-Wformat] Signed-off-by: Michael Lee <igvtee@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37827 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-23kernel/3.10: backport of_pci_get_devfn function from 3.11juhosg
Fixes the following build error on ramips/rt3883: arch/mips/pci/pci-rt3883.c:488:3: error: implicit declaration of function \ 'of_pci_get_devfn' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Although the function is only used by the PCI driver of the RT3883 SoC but at the moment but it might be useful for other targets as well. Signed-off-by: Michael Lee <igvtee@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37826 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-20 03:34:31 +0000