summaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2014-04-07/lib/functions.sh: move rarely used mtd and macaddr related functions to ↵nbd
/lib/functions/system.sh Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40411 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-07ar71xx: add support for the TP-LINK TL-WR841N/ND v9nbd
Everything seems to be working fine. Potential issues: * VLAN port IDs are reversed with regard to the numbers on the case. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40400 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-07ar71xx: add support for QCA953x SoCnbd
I don't have access to the specs, so I'm not sure about every detail, but I haven't seen any problems with my test system, a TL-WR841N v9. It looks pretty much like a QCA955x without PCI, a little twist in the clock calculation and a AR9331-compatible switch. Features not yet supported: * EHCI (my test system doesn't have USB) * ? (I have no idea if the QCA953x has any other features I don't know about that aren't used by the TL-WR841N v9) Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40399 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-06brcm63xx: hack around jffs2 corruption with SMPjogo
mempy_fromio seems to be randomly failing when the destination is unaligned; work around it by forcing the name to be aligned in memory. Should fix jffs2 and SMP for now, but needs to be some additional looking into as it does not fix the source. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-06lantiq: remove unmaintained codeblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40392 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-06ramips: fix regression from r39949 (#15382)nbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40391 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-05brcm63xx: sync mips counters during bringup of cpusjogo
Fixes gettimeofday returning different values depending on which cpu it is called. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40387 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-05lantiq: cleanup the dsl control scriptsblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40381 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-04brcm63xx: update development kernel to linux 3.14jogo
Now that 3.13 will be EOL soon, switch to 3.14. Known issues: * 74x164 is not available because upstream dropped non-DT support * jffs2 breaks with SMP Unknown issues: * probably plenty Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-04kernel: make sched_act_connmark compile for 3.14jogo
The upstream API changed, which allowed to simplify the code a bit. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40376 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-04kernel: make sched_esfq compile for 3.14jogo
net_random was replaced with prandom_u32. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40375 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-04kernel: add missing config symbol for linux 3.14jogo
Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40374 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-03lantiq: nand fixesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40372 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-03lantiq: BT Home Hub 2B support - userspaceblogic
Basic userspace configuration for BT Home Hub 2B Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40371 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-03lantiq: BT Home Hub 2B support - board supportblogic
Board support patch for BT Home Hub 2B Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40370 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-03lantiq: BT Home Hub 2B support - jedec probeblogic
Lantiq nor patch. Adds support for jedec probing if cfi probing fails. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40369 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-03lantiq: make td8970 wifi led workblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40368 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-03lantiq: fix vr9 ubi handlingblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40364 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-02x86: xen_domu is functional, remove broken flagnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40363 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-01orion: create a macro for zImage with machine idflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40360 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-01orion: fix KERNELNAMEflorian
uImage cannot be built in parallel properly until zImage is ready Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40359 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-04-01orion: fix initramfs uImage generationflorian
We would fail to copy an non-existent uImage-initramfs to $(BIN_DIR) Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40358 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-313.14 final is outkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40352 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30kernel: backport BCM5357 fix for GPIOshauke
This backports: bcma: gpio: register 32 GPIOs on BCM5357 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40347 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30brcm47xx: backport 3.14 patch for nvram GPIO pin readhauke
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40346 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30brcm47xx: Name LEDs colors for Linksys E1000 V2.1hauke
Handle it by creating a new patch for simple database changes. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40345 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30brcm47xx: update workarounds patch to V3hauke
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40344 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30ralink: fix chuncked-io moduleblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40342 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30revert: kernel: rtl8306: fix max pvid & remove port isolationblogic
apparently this one was nt a good idea to merge Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40330 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30lntiq: add support for Astoria ARV7519RW.blogic
These patches add support for the Astoria ARV7519RW aka Livebox 2.1 The PCI and PCIe interfaces have been disabled. Also, because there are two revisions of this board with different GPHY firmwares, two targets were defined. V2: rewrote partitions to work with an u-boot specifically made for these boards. Signed off by: Esteban Benito <estebanjbs@gmail.com> Signed off by: Carles Gadea <carlesgrg@gmail.com> Tested by: José Vázquez Fernández <ppvazquezfer@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30lantiq: do an endianness swap to the RT2860 eeprom for ARV752DPW(22)blogic
ARV7510PW22, ARV752DPW and ARV752DPW22 have the RT2860 eeprom stored in flash as big-endian, but the driver needs it in little-endian format. We have to swab it before handing it over. This requires my earlier patch for busybox. Funnily enough, ARV752DPW works also with the incorrect eeprom, but undoubtedly unoptimally. I have a hunch that also the final remaining Lantiq board would require this swabbing, but I'm not sure, so I just swab it in the three boards that I know about. v2: * Swab also on ARV7510PW22 based on feedback from Alvaro Rojas * Fix the offset with bs=2 Signed-off-by: Matti Laakso <malaakso at elisanet.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40328 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30lantiq: add esiblogic
http://patchwork.openwrt.org/patch/3703/ Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30lantiq: fix mtd_split for brnboot firmware imagesblogic
The existing code only tries to split a parition with name "rootfs" while actually looking for kernel+rootfs, where usually "firmware" is used as a partition name. This doesn't make sense, as even if there was a partition 'rootfs' given by mtdparts or via device-tree, this code would lead to another partition called 'rootfs' being created which would not be properly distinguished in the current user-space code. While potentially we could use CONFIG_MTD_SPLIT_FIRMWARE_NAME to make that configurable, the lack of users of brnboot and the fact that we can freely decide the partition name made me simply change the hard-coded string constant from "rootfs" to "firmware". (I'm going to add support for ARV7506PW which run brnboot and needs this change) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30lantiq: fixup ath5k supportblogic
http://patchwork.openwrt.org/patch/4417/ Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30lantiq: fix initial VLAN conf for P2601HNFXblogic
Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30lantiq: P2601HNFX dts update for STP and buttonsblogic
- Set correct AltSel for STP pins - Set front button to rfkill Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30lantiq: add support for Arcadyan ARV7519PWblogic
This patch adds almost full support for this board. - WiFi is still not working - USB will not power up. According to some reports, it may be a passive port Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40319 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30lantiq: reset gphys on rebootblogic
If gphys are not reset upstream uboot can not use them anymore. Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40318 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30lantiq: add support for ZyXEL P2812HNUFXblogic
This patch adds almost full support for this board. WiFi is still not working. The FXS ports are not functional due to missing support for the TAPI driver on VR9 SoC. Signed-off-by: Antonios Vamporakis <ant@area128.com> Tested-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40317 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30lantiq: add ubifs support in image Makefileblogic
Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40316 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30lantiq: add ubifs to FEATURESblogic
Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30lantiq: xrx200: add ubi support in the kernelblogic
Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30lantiq: add inital support for xrx200 switchblogic
Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40313 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30lantiq: xrx200: fix duplexblogic
Both the GPL driver from ZyXEL and the xrx200 driver have this error. The flags are reversed. Full duplex is marked as half and the other way around. With this fix the switch will push full GBit speeds. Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40312 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30lantiq: fixup 3370 dts fileblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40311 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30lantiq: fix nand/ebu lockingblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30lantiq: add tffs driverblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40309 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30kernel: export gluebi info to sysfsblogic
Export the ubi_num and vol_id into the sysfs record of the gluebi- emulated mtd device. Previously userspace didn't have a way to map gluebi-emulated devices back to their corresponding ubi volumes. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40306 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30kernel: rtl8306: fix vlan support on lantiq ar9 p2601hnfxblogic
If the CPU port is not forced up, the link, at least on this board, is lost after changes are applied. This makes sure that the link is restored. Regression tests should confirm it doesn't break other boards. Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-03-30kernel: rtl8306: fix max pvid & remove port isolationblogic
- hide port pvid - vlan index relation - switch initialises with vlans disabled so port isolation is not used - remove special treatment of cpu port Signed-off-by: Antonios Vamporakis <ant@area128.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40304 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-27 11:23:10 +0000