summaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2013-12-16ar71xx/mikrotik: disable unused MTD optionsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39080 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-16ar71xx: add dummy rle_decode function if CONFIG_RLE_DECOMPRESS is not setjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39079 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-16ar71xx: add userspace support for WD My Net N750juhosg
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> [juhosg: remove the image generation part until the ethernet switch issue is resolved] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-16ar71xx: add kernel support for WD My Net N750juhosg
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> [juhosg: use a separate patch for kernel changes] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39077 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-15generic: ar8216: Enable jumbo frames on AR8327 by defaultjuhosg
This patch enables jumbo frames on AR8327 switch by default. I have tested it on TP-Link TL-WDR3600. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-15ar71xx: build image for the TP-Link TL-WA901ND v3 boardjuhosg
Based-on: http://patchwork.openwrt.org/patch/4507/ Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-15ar71xx: add user-space support for the TP-Link TL-WA901ND v3 boardjuhosg
Based-on: http://patchwork.openwrt.org/patch/4508/ Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39074 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-15ar71xx: add kernel support for the TL-WA901ND v3 boardjuhosg
Based-on: http://patchwork.openwrt.org/patch/4506/ Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39073 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-15ar71xx: move TL-WA801ND v2 setup codejuhosg
The TL-WA801ND v2 board has only one LAN port which makes it more similar to the TL-WR[78]50RE devices. Move the board setup code into the mach-tl-wax50re.c file. Based-on: http://patchwork.openwrt.org/patch/4506/ Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39072 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-15ar71xx: refactor TL-WAx50RE setup codejuhosg
This way it is a bit easier to add other TP-LINK devices based on the Atheros AP123 reference board with one LAN port. Based-on: http://patchwork.openwrt.org/patch/4506/ Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39071 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-15ar71xx: build firmware image for the TL-WA801ND v2juhosg
Patch to add the profile for the TP-LINK WA801ND v2 Signed-off-by: Jiri Pirko <jiri@resnulli.us> Patchwork: http://patchwork.openwrt.org/patch/4502/ [juhosg: change subject] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-15ar71xx: add user space support for the TL-WA801ND v2juhosg
Patch to add the user space support for the TL-WA801ND v2 Signed-off-by: Jiri Pirko <jiri@resnulli.us> Patchwork: http://patchwork.openwrt.org/patch/4501/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-15ar71xx: add kernel support for the TL-WA801ND v2 boardjuhosg
Patch to add kernel support for the TP-LINK WA801ND v2 Signed-off-by: Jiri Pirko <jiri@resnulli.us> Patchwork: http://patchwork.openwrt.org/patch/4500/ [juhosg: - the TL-WA801ND v2 does not have a sliding switch, it uses a push button for WPS instead. Use the tl_mr3420v2_gpio_keys array to reflect that, - rename kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-15brcm47xx: deactivate early printk supporthauke
This breaks some devices where the serial console is not at port 0 but somewhere else. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-15kernel: update kernel 3.10 to 3.10.24hauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-14upgrade 3.12 targets to 3.12.5kaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39055 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-14[omap]: drop the bootscript, new u-boots won't need itkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39051 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-13ralink: add mt7621 supportblogic
there are still various missing pieces for full support. Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39040 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-12[omap]: add a default profile filekaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39037 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-11imx6: add canbus support for Ventana boardsluka
GW5400, GW5300, and GW5200 have CAN bus option. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39034 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-11imx6: add flexcan supportluka
backport upstream changes to 3.10: - 0060-flexcan.patch: - add flexcan pinctrl and devicetree config - 0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch - fix a clock issue - 0062-ARM-i.MX6q-fix-the-wrong-parent-of-can_root-clock.patch - fix a clock issue Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39033 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-09ralink: add TSOblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39019 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-09ralink: fix typo in gpio irq handlingblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39018 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-09ralink: add mt7620a gdma info to dtsiblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39017 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-09ralink: add asoc modulesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-09ralink: add partially working asoc driver. codec is not fully functional yetblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-09ralink: add helper that identifies the mt7620 ECOblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39014 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-09ralink: add dma engine supportblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-09imx6: add support for GW53xxluka
The Gateworks GW53xx family of products is based on the Freescale i.MX6DL SoC and offers a small form-factor with peripherals such as: * i.MX6DL * NAND FLASH * 4x PCIe * 4x USB EHCI (1x front-panel; 3x PCIe sockets) * 1x USB OTG * 1x uSD * LVDS connector (VLDS for display, PWM/GPIO for backlight, i2c for touch) * HDMI Audio/Video out * Analog Video in * Digital IO * Gateworks System Controller * Accelerometer * Canbus * Optional GPS * Industrial temp (-40C to +85C) * DC input voltage 8 to 42V (Passive PoE and 802.3af) Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39012 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-09imx6: add DMA/SDMA support for 3.12luka
DMA and SDMA support are needed for ssi based audio. Note that the sdma firmware is no longer required for ssi audio. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-09imx6: drop upstreamed patchluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-09kernel: added defines for 3.12luka
Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39009 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-08ath9k: merge initval and tx gain table updates, calibration fixesnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-06generic: workaround arptables arpt_arp structure padding issue (#14577)jow
Linaro GCC 4.6-2013.05 incorrectly pads the arpt_arp structure on at least the ar71xx target, resulting in a two bytes shorter struct in the kernel compared to what arptables userspace expects. When comparing sizeof(struct arpt_arp) in kernel and userspace, the former yields 162 byte, while the latter is 164 byte. As a consequence, the subsequent target_offset and next_offset members of the parent arpt_entry structure contain invalid values when processed by the arptables binary, leading to bad memory accesses in the populate_cache() procedure, subsequently causing a segfault. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-06generic: fix occasional "execvp: /bin/sh: Argument list too long" is kernel ↵jow
header install phase (#12907) Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-01brcm47xx: misc cleanupshauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-01brcm47xx: deactivate mips wait instruction only for BCM4706hauke
The wait instruction is only broken on the BCM4706 and not on the other similar SoCs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38979 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-01brcm47xx: config: set CONFIG_HZ=100 and CONFIG_IP_ROUTE_VERBOSEhauke
This sets both values to the OpenWrt default values. There is no reason to use some brcm47xx specific values here. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-01brcm47xx: add vectored interruptshauke
This adds support for vectored interrupts in this SoC. This is supported by the 74K cpus. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-01brcm47xx: add cpu overwrites hauke
bcm47xx misses cpu overwrites for the features of the CPUs used in these SoCs. Instead of manually checking, it is now known at compile time for some options and the compiler is able to remove the checks and optimize the code. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-01brcm47xx: use "firmware" partition namehauke
Some time ago, after switching to the mainline bcm47xxpart driver following patch has been applied: commit 03cef8725d2062335ffc3de50fc037b294fd458c Author: hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73> Date: Sat Apr 6 22:22:26 2013 +0000 brcm47xx: use old partition names again for kernel 3.8 This fixes sysupgrade. The partition names are used all over the Internet in various howtos. Thank you russell for spotting this problem. I propose to revert this change and make sysupgrade use "firmware" instead. This makes brcm47xx compatible with widely used ar71xx and after all "firmware" sounds like a much better name for... the firmware. This change doesn't affect "sysupgrade" usage, because it never takes a partition name as a parameter. This change only affects users using mtd tool directly. Hopefully there are not many howtos using "mtd" command. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38973 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-12-01kernel: update 3.10 to 3.10.21juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-30ar71xx: merge board specific patches into oneluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-30kernel: refresh kernel configs with kconfig.pljuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-30ar71xx: update Userspace support for the WA850/WA750juhosg
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38969 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-30ar71xx: Update profile for the wa750/wa850 to include rssileds by defaultjuhosg
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38968 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-30ar71xx: use cybertan_check_image for image verification on the WRT160NLjuhosg
That function provides a slightly improved sanity check than the currently used solution. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38967 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-30ar71xx: sysupgrade for My Net Wi-Fi Range Extenderjuhosg
This patch enables the convenient sysupgrade feature for WD's Wi-Fi Range Extender. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4341/ [juhosg: - rename 'mynet_rext_check_image' function to 'cybertan_check_image' and move that into platform.sh, - remove the the model specific 'platform_do_upgrade_mynet_rext' function, - drop the mynet-rext.sh script, - remove the image/Makefile change, - update commit message] [christian: - check all 8 bytes of the firmware/device magic] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38966 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-30ar71xx: image: unify CyberTAN macrosjuhosg
Make the Image/Build/CyberTAN macro more generic, and use simple wrappers for the GZIP/LZMA variants. This simplifies the Makefile a bit, and allows to build sysupgrade images for the devices which are using LZMA compressed uImages. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38965 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-30ar71xx: image: fix CyberTAN sysupgrade imagesjuhosg
In the current sysupgrade images, the CRC32 value of the TRX header covers the whole rootfs data. Due to this, the CRC value should be changed during sysupgrade otherwise the bootloader refuses to load the image on the next boot. Change the image generation to create sysupgrade images where the CRC32 value covers the kernel data only. This allows to skip the 'fixtrx' step during sysupgrade on the target. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38964 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-17 16:25:11 +0000