summaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2013-01-28[lantiq] Fix ARV7518 USBblogic
This patch correctly fixes USB on Lantiq ARV7518. There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/). Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35354 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28[lantiq] Add ath9k eeprom and pci fixup supportblogic
Add ath9k eeprom and pci fixup support (again) for linux 3.7. On linux 3.3, the fixup forced the regdomain to 0x67, causing low TX power. This patch only corrects checksum, the rest of the EEPROM isn't changed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35353 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28[lantiq] Add support for ARV4518PW R01 and rename R01A.blogic
There are two different versions of SMC7908A-ISP: R01 and R01A. R01 has an internal clock for PCI, meanwhile R01A has an external clock. This fixes: https://dev.openwrt.org/ticket/12884 Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35352 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27kernel: disable CONFIG_CRYPTO_MANAGER2, it is not needednbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35342 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27brcm47xx: load pps_core and ptp before tg3 to make the interface available ↵hauke
for failsafe. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35341 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27kernel: b53: the b53 spi driver depends on spihauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35340 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27kernel: add packages for pps and ptp, they are needed by tg3 in kernel 3.8hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35336 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27netfilter: add support for flushing conntrack via /procnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35330 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27kernel: clean up crypto kconfig options on 3.8nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8hauke
These attributes where removed with kernel 3.8 and are now causing compile errors. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35328 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27kernel: clean up crypto related kconfig optionsnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35327 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27ar71xx: disable support for unsupported mtd configuration, saves about 5K ↵nbd
kernel size after lzma git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27kernel: prevent cryptomgr from pulling in useless extra dependencies for ↵nbd
tests that are not run Reduces kernel size after LZMA by about 5k on MIPS git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35325 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-26brcm47xx: create image for Netgear WNDR3400 V1hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-26brcm47xx: add initial board detection codehauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35322 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-26brcm47xx: add gpio to irq function againhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-26kernel: use -ffunction-sections, -fdata-sections and --gc-sections on mipsnbd
in combination with kernel symbol export stripping this significantly reduces the kernel image size git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-24kernel: update linux 3.7 to 3.7.4juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35318 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-24kernel: refresh 3.8 patchesflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35317 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-24mvebu: update to 3.8-rc4florian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35316 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-24kernel: add missing config options for 3.8hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-24brcm47xx: change generic profileshauke
The default profile now contains Ethernet drivers for all the types found on supported boards. There are other profiles for each Ethernet driver. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23kernel: remove the cisco sip phone patch for 3.7 and 3.8 as wellnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23ar71xx: sync kernel sizes where possible to fix images for some devices (#12874)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35309 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23bcm63xx: switch to b53 and swconfigjogo
Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23bcm63xx: expose the internal switch to b53jogo
Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35306 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23generic: add b53 swconfig switch driverjogo
Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports switches connected through MDIO, SPI or memory mapped registers, and supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch chips. Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23bcm63xx: move bcm63xx-spi into the kerneljogo
The SPI driver is needed for supporting to boot from SPI flash on BCM6358 and BCM6368, and for SPI connected switches. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19kernel: remove 340-module_alloc_size_check.patch from linux 3.8, it is not ↵nbd
necessary anymore git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19ramips: add profile and build image for the Tenda 3G300Mjuhosg
Factory image should be used to flash from original firmware. [juhosg: use the GENERIC_4M template] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19ramips: add user-space support for the Tenda 3G300Mjuhosg
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35245 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19ramips: add kernel support for the Tenda 3G300Mjuhosg
Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons and seven leds. Factory image should be used to flash from original firmware. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19ramips: use MkImage for Hauppauge Broadway, Netcore NW718 and Tenda W306R V2.0juhosg
These targets need custom image names specified in the uImage header. MkImage accepts an optional 4th argument to do exactly that. Reuse the facility to generate factory images. Compile-tested, the generated files inspected with "file" utility. [juhosg: - keep the factory.bin images to avoid users confusion, - use GENERIC_4M template for the W306R V2.0 - update commit log] Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19ramips: allow to override image name/suffix in GENERIC_{4,8}M macrosjuhosg
Sysupgrade/KRuImage and BuildFirmware/Generic macros are changed as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19ramips: do not stop the build if some targets failjuhosg
This becomes crucial when you are using a generic profile to build an image larger than 4M, e.g. for w502u. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35238 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-18generic: rtl8366_smi: only assign pvid if no pvid was set yetjogo
Only assign a pvid if the current pvid is 0. Fixes using mixed tagged and untagged traffic on a port and the untagged vlan isn't the last one of which the port is a member. Tested on RTL8366S and RTL8367R. Fixes #8501. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35227 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-18all targets: use numerically prefixed uci-defaults file names to better ↵jow
control order of execution git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-18kernel: update linux 3.7 to 3.7.3juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35216 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17mvebu: enable PCI in kernel configurationflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35214 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17mvebu: enable PCIe on Marvell Armada 370 Reference Designflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17mvebu: enable USB on Armada 370 Reference Designflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17mvebu: add preliminary support for PCI expressflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35211 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17mvebu: refresh patchesflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35210 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17kernel: refresh 3.8 patchesflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35209 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17mvebu: add board detection scriptsflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35208 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17mvebu: enable /proc/devicetree usageflorian
This is going to be used for proper user-space board identification (ala mcs814x). Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35207 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17mvebu: add default profileflorian
Such that relevant kernel modules are selected (USB, I2C, SATA, RTC, SDIO) Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35206 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17x86: explicitely pass staging directory to grub-mkimage instead of relying ↵jow
on build time defaults (#12821) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35200 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17generic: add EHCI|OHCI platform driver fix to 3.[36]juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35194 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17ramips: enable BR6425N in kernel confignbd
Though originally contained in the patch applied in r35020, the move to 3.7 in r34845 lost the kernel .config option. Reintroduce it to config-3.7. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35191 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-21 04:55:00 +0000