summaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2013-11-16kernel: add missing symbols for 3.12wigyori
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-16sunxi: remove old kernel config after 3.12 upgrade (r38811)luka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-15[omap]: replace the TI patch with a smaller patchsetkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38816 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-15ar71xx: add profile for the WR842N/ND v2juhosg
Patch to add the profile for the TP-LINK WR842N/ND v2 Small update, because of a change in the Makefile. Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4382/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38815 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-15ar71xx: add user space support for the TL-WR842N/ND v2juhosg
Patch to add the user space support for the TL-WR842N/ND v2 Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4354/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38814 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-15ar71xx: Add kernel support for the WR842N/ND v2juhosg
Patch to add kernel support for the TP-LINK WR842N/ND v2 Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4352/ [juhosg: refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-15ar71xx: wndr4300: set official mac addressesjuhosg
Get the factory assigned mac addresses stored in the caldata partition and asign them to lan and wan interfaces. Also put the correct mac addresses into the WiFi eeprom files to ensure that the ath9k driver will use the correct ones. Signed-off-by: Stefan Agner <stefan@agner.ch> Patchwork: http://patchwork.openwrt.org/patch/4350/ [juhosg: - move WiFi MAC address setup to the firmware hotplug file, - use the official MAC address for the 2.4GHz as well, - remove uci-defaults.sh modifications, - update commit message] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38812 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14sunxi: rework targetwigyori
- update kernel to 3.12 - add patches for clocks, i2c, usb, sid, rtc - support common image for A10/A13/A20 - add support for a couple boards - most drivers are configured into the kernel as of now Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38811 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14kernel: backport an upstream fix to improve TCP performance for wifi driversnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14ar71xx: Unifi AP Pro sysupgrade patchnbd
The current implementation of mtd will not append the backup file created by sysupgrade to the correct partition, as mtd will append the data to first jffs2 partition it finds. As the kernel is also stored on a jffs2 partition (which resides before the overlay partition), the data will be appended to this partition. To fix this problem, a new option -s <number> skip the first n bytes when appending data to the jffs2 partiton, defaults to "0" is added to mtd. Signed-off-by: Peter Wagner <tripolar@gmx.at> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38807 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14ramips: use dd bs=4096k instead of bs=4M to make it more portablenbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14ar71xx: use the new padjffs2 padding on Ubiquiti UAP-PRO to make the boot ↵nbd
loader stop searching after the kernel partition Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-13bcm53xx: this ARM SoC does not have a FPU, use soft float.hauke
model name : ARMv7 Processor rev 0 (v7l) Features : swp half thumb fastmult edsp tls Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38796 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-13brcm47xx: swap also early boot console if necessary.hauke
Some devices are using tty1 as the default console, also swap the early boot console in such case. This is needed for the WGT634U. Thank you Russell for reporting this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-13kernel: b53: fix untagged shift for BCM5365hauke
The BCM5365 needs a shift of 7 bits and not 6 bits like the BCM5325 for the untagged ports. Thank you Russell for reporting this and testing the patch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-13ramips: select kmod-rt2800-soc by default (if available)nbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38784 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-12mxs: - update uboot-mxs to 3.10wigyori
- enable building uboot for imx23 along sbImage by default - (doc updated) Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38781 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-12mxs: bump kernel to 3.12wigyori
- remove DCP patch as it's in mainline now (dts patch will stay) - refresh Duckbill patch - update kmod-usb-chipidea Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38780 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-12mxs: add basic board runtime detection supportwigyori
Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38777 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-12mxs: duckbill: adjust leds to final hardwarewigyori
Signed-off-by: Michael Heimpold <mhei@heimpold.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38775 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-12mxs: rename uboot-imx23 to uboot-mxswigyori
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38774 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-12mxs: fix loadaddr for uImageswigyori
Signed-off-by: Harald Geyer <harald@ccbib.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38773 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11brcm47xx: fix netconfig for inverted vlan?ports in nvramhauke
This was observed on the Belkin Share F7D7302. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38769 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11linux/brcm47xx : Belkin F7Dx30x board detectionhauke
boardnum is unstable, so allow using NULL to make it unchecked. A method for differentiating F7D3301 from F7D3302 using nvram is unknown at this point. Reading the first 32bits of magic from the "linux" mtd partition would do the trick, but these 2 are similar enough that we don't need separate led/button definitions. Not knowing which one you have is only a usability issue for upgrading the device: they expect different magic numbers for their trx images. Signed-off-by: Cody P Schafer <devel@codyps.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38767 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11brcm47xx: b44: fix logic in BUG_ON()hauke
It is a problem when phydev is not set at this position and not the other way around. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38744 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11ixp4xx: fix usb on cambria boards by using the ehci-platform drivernbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38740 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11ramips: use gpio-button-hotplug in favour of the input variantblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38735 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11ramips: make the rfkill switch work on fonera20nblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11lantiq: DGN3500 fixupsblogic
Just fixing up a few things for the Netgear DGN3500. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11lantiq: rename TDW8970 led adsl->dslblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38730 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11lantiq: update TDW8970.dts to support buttons properlyblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38728 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11lantiq: remove old hotplug handlerblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38727 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11[omap]: add missing option, enable hw rngkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11ar71xx: Use KEY_RESTART key code for the reset button on WD My Net N600 boardsjuhosg
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38720 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11ar71xx: add profile and build image for the TL-WA750RE TL-WA850RE range extenderjuhosg
Patch to add profile and build image for the tplink TL-WA750RE/WA850RE board Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38719 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11ar71xx: add user space support for the TL-WA750RE/WA850RE Range extenderjuhosg
Patch to add user space support for the TL-WA750RE/WA850RE range extender Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11ar71xx: Add kernel support for the TP-Link WA750RE / WA850RE range extenderjuhosg
Patch to add kernel support for the TP-LINK WA750RE and the WA850RE range extender Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> [juhosg: rename and refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11ar71xx: ag71xx: fix ag71xx_probe error pathjuhosg
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38716 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11bcm53xx: make bgmac workhauke
This makes bgmac work without sprom and refreshed the patches. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38715 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11kernel: bgmac: make it send and receive some packages on BCM4708hauke
This adds some more code for bgmac core rev 4 and it now restarts all cores when initializing the first one on BCM4708. I am just able to send under 100 packages and then DMA TX does not work any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38714 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11kernel: bcma: detect pci ID 0x4313hauke
This pci ID is used by sprom less BCM4313 devices. This is a backport from the mainline kernel. This is part of #13551. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-10kernel: b53: add initial support for switches in BCM5301Xhauke
This is also known as BCM470{7,8,9}. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38712 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-10[cns3xxx]: add uImage image buildkaloz
- add building of a standard uImage along with the combined kernel+rootfs - remove 'old' image build - that was for a very old and obsolete bootloader To update the bootloader for GW2387,GW2388,GW2391 (NOR Flash) from uboot: put latest NOR bootloader on tftp server: http://svn.gateworks.com/laguna/trunk/images/u-boot_nor.bin Laguna> setenv ipaddr <localip> Laguna> setenv ipaddr <serverip> Laguna> tftpboot 0x800000 laguna/u-boot-nor.bin Laguna> erase 0x10000000 +$(filesize) Laguna> cp.b 0x800000 0x10000000 $(filesize) Laguna> reset To update the bootloader for GW2380,GW2382,GW2383 (SPI Flash) from uboot: put latest SPI bootloader on tftp server: http://svn.gateworks.com/laguna/trunk/images/u-boot_spi.bin Laguna> setenv ipaddr <localip> Laguna> setenv ipaddr <serverip> Laguna> tftpboot 0x800000 laguna/u-boot-spi.bin Laguna> erase 0x60000000 +$(filesize) Laguna> cp.b 0x800000 0x60000000 $(filesize) Laguna> reset Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-10[cns3xxx]: add pushbutton GPIO for GW2380/82/83kaloz
Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38702 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-09brcm47xx: add detection for Linksys WRT54GS V1hauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-09brcm47xx: register ADM6996L switchhauke
This patch makes it possible to use adm6996.c on first generation BCM47XX devices with ADM switches. This was tested on a WRT54GS version 1.0, thank you Dirk Neukirchen for the device. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-09kernel: adm6996: add support for ADM6996L and GPIO interfacehauke
This patch makes it possible to use adm6996.c on first generation BCM47XX devices with ADM switches. The GPIO bit banging protocol implementation was copied from the old switch driver and adapted to this driver and changed to the mainline kernel GPIO interface. The ADM6996L is different from the ADM6996M which is supported, for both specs are available in the Internet. This was tested on a WRT54GS version 1.0, thank you Dirk Neukirchen for the device. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-08[omap]: switch to 3.12, enable support for AM33xx/OMAP3kaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38692 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-08[omap]: rename the omap4 target to omapkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38691 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-08ar71xx: ag71xx: fix a race involving netdev registrationjuhosg
In particular, phy_connect before register_netdev. This is because register_netdev runs the netdev notifiers, which can race with the rest of the initialization in ag71xx_probe. In my case this manifested in two ways: 1) If ag71xx is compiled as a module and inserted after netifd has started, netifd is notified by register_netdev before the call to ag71xx_phy_connect. netifd tries to bring the interface up, which calls ag71xx_open, which in turn enters ag71xx_phy_start. This keys off ag->phy_dev (which is still NULL) and thinks this is a fixed-link board, and enters ag71xx_link_adjust. This looks at ag->speed which is not yet initialized and hits the BUG() in the switch (ag->speed) in ag71xx_link_adjust. This is the wrong code path for ag71xx_phy_start - my board has PHYs that need to be brought up with phy_start. Doing ag71xx_phy_connect before register_netdev ensures that ag->phy_dev is non-NULL before ag71xx_phy_start is ever called. 2) When ag71xx is built into the kernel, and netconsole is enabled, there is a gap in the initial burst of replayed printks right after the netdev comes up. My assumption is that netconsole is also triggered by a netdev notifier, and part of this printk burst happens before the call into ag71xx_phy_connect, so part of the burst is lost while the PHY comes up. This patch fixes the gap - all the printks before eth0 comes up are bursted in full when netconsole initializes. ag71xx_phy_connect_xxx no longer runs with a registered netdev, so the logging has been adjusted accordingly to avoid "unregistered net_device" or "eth%d" messages in dmesg. Signed-off-by: Catalin Patulea <cat@vv.carleton.ca> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38689 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-27 06:42:58 +0000