summaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2012-09-25[ramips] make uci-defaults switch detection work on rt5350blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25[ramips] add ethernet support for rt5350blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25[ramips] make ramips ethernet use a register mapping tableblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25[brcm47xx]: activate failsafe on all ports of the switch and not just port 0.hauke
Sometimes the port 0 was the WAN port or there could be some device where the port 0 is not wired to an actual Ethernet port. Now telnet in failsafe will listen on all ports of the switch so user do not have to search for the correct port any more. This change will make the switch leak traffic between the WAN and the LAN port, but you should not use failsafe while connected to a untrusted network. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33544 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boardsjuhosg
With these images, it is possible to use the 'unused' partition of the flash. The 'fat' images can be installed with the sysupgrade command. When a 'fat' image is installed from a regular one, the platform specific sysupgrade script copies the calibration data to the end of the flash. Likewise, when a regular image is installed from the 'fat' version the sysupgrade script copies the calibration data back to the original location. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25ar71xx: automatically find WLAN calibration data on TEW-673GRUjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33539 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25ar71xx: automatically find WLAN calibration data on DIR-825-B1juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33538 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25ar71xx: add missing backslash to uci-defaults/leds (closes #12240)juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33537 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25[ramips] unbreak port mapping detectionblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33536 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-24ar71xx: use different machtype and setup for the TL-MR3040juhosg
Should fix #12211. Compile tested only. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-23x86: avoid using grub prepare when using grub2nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22x86-generic: enable a few more common kernel options/driversnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33516 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22kernel: increase log buffer sizenbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33515 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22x86: enable usb storage support for the generic subtarget to support booting ↵nbd
from usb devices git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33514 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22x86: add support for building grub2 imagesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22x86: split generic image building into a separate scriptnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33511 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22x86: rename gen_image_x86.sh to gen_image_grub.shnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33510 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22cns3xxx: fix ethernet driver tx completion and queue stop/startnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33504 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22cns3xxx: implement ethernet fraglist tx support for improved bridging ↵nbd
performance with jumbo frames git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33503 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-21[cns3xxx]: move gpio stuff into the right filekaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33502 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-21[generic/3.3]: refresh patcheskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33501 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-21cns3xxx: add a small optimization for rx offloadnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33500 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-21cns3xxx: fix ethernet port lookup for multi-descriptor jumbo framesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33499 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-20cns3xxx: fix ethernet packet alignment issues (hw has an alignment ↵nbd
requirement of 64), fix skb fragment chaining git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-20kernel: enable perf events when enabling profiling, fixes oprofile on armnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33497 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-20[brcm47xx]: deactivate mips wait instruction for MIPS 74K on Broadcom SoCshauke
When not removing support for the wait instruction, when ruining on the BCM4706 SoC the system stops after msleep() without an exception. I haven't seen this problem on the other Broadcom SoCs with a 74K CPU, but in the Broadcom SDK it is deactivated for all CPUs of this type. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33496 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: remove the broken flagnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33493 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: fix kernel confignbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33492 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: fix ethernet jumbo-frame support, use single-page rx buffers and ↵nbd
skb fragment lists git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33491 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: fix ethernet tx checksum offloadnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: merge ethernet driver changes from gateworksnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33489 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: build images for the old boot loader and the new one (default to ↵nbd
the new one) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33488 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: fix the ethernet driver makefilenbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: reorganize patches, fix pcie io space init ordernbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33486 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: move virtual io addresses to vmalloc space to fix kernel BUG() callsnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33485 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19cns3xxx: add missing callbacks for the laguna machine supportnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33484 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19brcm47xx/profiles/PS-1208MFG: remove reference to non-existing packageflorian
The package block-hotplug doesn't exist, refer to block-mount instead. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33474 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19omap24xx/profiles/n810: remove reference to non-existing packageflorian
The package block-hotplug doesn't exist, removing reference to it. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19[brcm47xx]: update fix-boot patch.hauke
Do not change the code any more but use the kconfig options git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19[brcm47xx]: update gpio patcheshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-18ar71xx: fix a typo in TEW-637GRU image namesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-18ar71xx: revert DIR-825-B1 wholeflash image support.juhosg
It should be implemmented in a cleaner way. This reverts the following commits: [ar71xx] dir-825-b1: Fix wholeflash images [ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash" git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-18[realview] disable VFPv4 probingflorian
This will make the kernel crash on systems using qemu < 1.1.0. Until fixed disable VPFv4 capability probing. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-18[realview] partially revert r33403florian
The target CFLAGS were also accidentally changed git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33457 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17ar71xx: register the NAND flash controller device on DB120juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17ar71xx: ar934x_nfc: remove unused oob parameter of ar934x_nfc_send_readjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17ar71xx: ar934x_nfc: increase DMA retry countjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17ar71xx: ar934x_nfc: optimize READOOB operation on large page devicesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17ar71xx: ar934x_nfc: fix RNDOUT operationjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-17ar71xx: ar934x_nfc: fix READ{0,1} operation on large page devicesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33450 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 07:30:47 +0000