summaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2013-01-23bcm63xx: switch to b53 and swconfigjogo
Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23bcm63xx: expose the internal switch to b53jogo
Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35306 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23generic: add b53 swconfig switch driverjogo
Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports switches connected through MDIO, SPI or memory mapped registers, and supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch chips. Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-23bcm63xx: move bcm63xx-spi into the kerneljogo
The SPI driver is needed for supporting to boot from SPI flash on BCM6358 and BCM6368, and for SPI connected switches. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19kernel: remove 340-module_alloc_size_check.patch from linux 3.8, it is not ↵nbd
necessary anymore git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19ramips: add profile and build image for the Tenda 3G300Mjuhosg
Factory image should be used to flash from original firmware. [juhosg: use the GENERIC_4M template] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19ramips: add user-space support for the Tenda 3G300Mjuhosg
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35245 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19ramips: add kernel support for the Tenda 3G300Mjuhosg
Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons and seven leds. Factory image should be used to flash from original firmware. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19ramips: use MkImage for Hauppauge Broadway, Netcore NW718 and Tenda W306R V2.0juhosg
These targets need custom image names specified in the uImage header. MkImage accepts an optional 4th argument to do exactly that. Reuse the facility to generate factory images. Compile-tested, the generated files inspected with "file" utility. [juhosg: - keep the factory.bin images to avoid users confusion, - use GENERIC_4M template for the W306R V2.0 - update commit log] Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19ramips: allow to override image name/suffix in GENERIC_{4,8}M macrosjuhosg
Sysupgrade/KRuImage and BuildFirmware/Generic macros are changed as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19ramips: do not stop the build if some targets failjuhosg
This becomes crucial when you are using a generic profile to build an image larger than 4M, e.g. for w502u. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35238 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-18generic: rtl8366_smi: only assign pvid if no pvid was set yetjogo
Only assign a pvid if the current pvid is 0. Fixes using mixed tagged and untagged traffic on a port and the untagged vlan isn't the last one of which the port is a member. Tested on RTL8366S and RTL8367R. Fixes #8501. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35227 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-18all targets: use numerically prefixed uci-defaults file names to better ↵jow
control order of execution git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-18kernel: update linux 3.7 to 3.7.3juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35216 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17mvebu: enable PCI in kernel configurationflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35214 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17mvebu: enable PCIe on Marvell Armada 370 Reference Designflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17mvebu: enable USB on Armada 370 Reference Designflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17mvebu: add preliminary support for PCI expressflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35211 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17mvebu: refresh patchesflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35210 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17kernel: refresh 3.8 patchesflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35209 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17mvebu: add board detection scriptsflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35208 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17mvebu: enable /proc/devicetree usageflorian
This is going to be used for proper user-space board identification (ala mcs814x). Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35207 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17mvebu: add default profileflorian
Such that relevant kernel modules are selected (USB, I2C, SATA, RTC, SDIO) Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35206 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17x86: explicitely pass staging directory to grub-mkimage instead of relying ↵jow
on build time defaults (#12821) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35200 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17generic: add EHCI|OHCI platform driver fix to 3.[36]juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35194 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-17ramips: enable BR6425N in kernel confignbd
Though originally contained in the patch applied in r35020, the move to 3.7 in r34845 lost the kernel .config option. Reintroduce it to config-3.7. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-15mvebu: add support for EHCI controllerflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35181 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-15mvebu: add support for the Marvell Armada 370 Reference Design boardflorian
Keep the patches in sync with the upstream developments. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35179 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-15mvebu: enable SMP with SMP on UP enabledflorian
The same kernel works ok for both Armada 370 (UP) and Armada XP (SMP) Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35178 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-15mvebu: add support for RTCflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35176 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-14kernel: port 203-kallsyms_uncompressed.patch and 305-mips_module_reloc.patch ↵nbd
to 3.8 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35162 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-14generic: remove EHCI platform driver fix from 3.8juhosg
It is not needed on 3.8. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35160 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-14generic: add EHCI|OHCI platform driver fix from the cns21xx targetjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35159 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-14target: enable XZ BCJ decompressor code after r35097florian
Required to actually be able to mount squashfs xz compressed filesystems. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35156 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-14kernel: add a config option for keeping the kallsyms table uncompressed, ↵nbd
saving ~9kb kernel size after lzma on ar71xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35154 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-13ar71xx: fix unaligned access in cls_u32nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-13ar71xx: fix unaligned access in a few more placesnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-13ar71xx: improve unaligned access patches, add a net_hdr_word() macro which ↵nbd
assumes 2-byte aligned access and generates better code than {get,put}_unaligned_cpu32 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-13ar71xx: avoid __packed define in the unaligned access hack patch, make the ↵nbd
ipv6 address struct also 2-byte-aligned/packed git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-13kernel: add back the mips module relocation patchnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-13ar71xx: add more cpu feature overrides, slightly reduces kernel sizenbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-13ar71xx: extend the unaligned access hacks to a few more places that showed ↵nbd
up in the new kernel git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-12brcm47xx: BCMA - Update default IRQ assignment per upstream changehauke
Update the default IRQ assignment for unrecognized devices per the upstream change. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35121 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-12refresh kernel configs with kconfig.pljuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35119 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-12malta: remove 3.6 supportjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-12malta: build lzma and gzip compressed uImagesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35117 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-12adm5120: remove 3.6 supportjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35116 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-12adm5120: switch to 3.7juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-12ar71xx: remove 3.6 supportjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35114 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-12ar71xx: switch to 3.7juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35113 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 22:32:34 +0000