summaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2012-09-13ar71xx: package the AR934x NAND driver modulejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33386 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33385 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13generic: add MTD_NAND_AR934X symboljuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-13generic: move GENERIC_PWM symbol into the generic configjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33383 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-12ar71xx: define NAND controller base address and register size for AR934X/QCA955xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33382 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-12ramips/rt305x: add initial support for Rt5350 SoCjuhosg
Somehow detecting the RAM size in common/setup.c doesn't work here, it always detects 64M and then crashes on devices with less RAM. Probably using MEMC_REG_SDRAM_CFG1 to know the RAM size is how it could be, for now I use the mem=32M kernel parameter to get stuff working. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33381 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-11[brcm47xx]: add gpio sysfs entrieshauke
This fixes #10256 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33369 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-10ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on QCA955xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33362 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-10ar71xx: fix QCA955X_EHCI_SIZEjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33360 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-10[generic] fix ixp4xx_hss build failure (#12162)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33356 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09[ar71xx] fix description of nand/Ath5k profile (#12149)jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33352 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09ar71xx: add initial support for RB2011UAS-2HnDjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33349 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09ar71xx: use routerboot_find_tag to find wlan data offset on RB751juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33348 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09ar71xx: add RouterBoot related helper routinesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33347 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09generic add WLAN calibration data ID to routerboot.hjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33346 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09ar71xx: define MTD partitions for RB2011juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33345 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09ar71xx: add preliminary support for Mikrotik RB2011Ljuhosg
This patch adds preliminary support for the Mikrotik RB2011L. The NAND flash is not yet supported, so only the initramfs kernel can be used for now. [juhosg: remove unnecessary PCI/USB related stuff, the board does not use that, update commit message] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33344 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33343 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09ar71xx: add dynamic MDIO clock calculationjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33342 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09adm5120: move common routerboot definitions into a separate header filejuhosg
Those will be used on the ar71xx platform as well. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33341 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-09bcm63xx: fix WPS button polarity for Alice Gate VoIP 2 + Wifijogo
Fixes booting the device with button hotplug enabled (#10785). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33340 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08ar71xx: use the RLE library for RB751juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33338 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08ar71xx: add library code for RLE decodingjuhosg
It will be used for the MikroTik boards. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33337 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08ar71xx: fix CPU/DDR frequency calculation for SRIF PLLs on AR934xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33335 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08ar71xx: refresh kernel patchesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33334 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-08[mcs814x] use the recommended ARM I/O accessorsflorian
use {read,write}l_relaxed instead of the plain __raw_{read,write}l variants. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33330 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-06[ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash (must ↵cshore
first be flashed with the 'standard' image) and an image to revert the change to allow reversion to stock firmware. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-06lantiq: fix sx76x default uci network configurationluka
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05[mcs814x] add some ohci workarounds to make ohci workflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05ramips: Add missing andmask to ramips_esw register read for recv_good value.juhosg
Add missing andmask to ramips_esw register read for recv_good value. Without the mask, recv_bad leaks into the recv_good packet count. Didn't notice the bug before since you don't usually get bad packets, so I only saw it when I was playing with overlength packets earlier... Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33322 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05ramips: Use doubletagging to disable ramips_esw vlan by default, it seems ↵juhosg
more reliable. Use doubletagging to disable ramips_esw vlan by default, it seems more reliable. Daniel Golle found an issue where sometimes (possibly only for RT3352) the default vlan disable method (clearing en_vlan, untag, doubletag and putting all ports into vlan 0) doesn't work and the packets get sent out vlan-tagged with vlan 0. Instead switch to using the doubletagging method (allow doubletagged packets, put all ports into vlan 0 with untag enabled) by default. Unless someone figures out a way to really globally disable vlan for this switch, this seems like the best (most reliable) option. I did some tests regarding maximum packet size and did not see any difference between the two methods, both allow for slightly bigger packets than the ramips_main.c ethernet driver (ping stops going through above "ping -s 1472" (1514 bytes), on the switch packets are recv_good until "ping -s 1490", or about 1532 bytes). Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05[x86] add missing kvm_guest kernel optionsblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33319 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on AR934xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33318 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05ar71xx: add rssileds to package set in profile for devices which got them.juhosg
Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33317 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05ramips: add rssileds to package set in profile for devices which got them.juhosg
Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33316 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-03[mcs814x] enable CFI command set 0002 FORCE_WORD_WRITEflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-03[mcs814x] pad squashfs imageflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-03[mcs814x] add Generic and dLAN USB Extender profilesflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33313 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-03[mcs814x] nuport-mac: disable MAC RX and TX during interface closeflorian
Fixes sporadic crashes while reconfiguring the network interface. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33312 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240"juhosg
That was based on assumptions. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ar71xx: all0315n: fix ethernet according to vendor infojuhosg
Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33309 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ar71xx: add RSSI LEDs of ALL0315N to uci-defaults/ledsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: make built-in switch transparent for ALL0256N and ALL5002juhosg
This allows them to transparently communicate with an external VLAN switch. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Power down phy on disabled switch portsjuhosg
Power down phy on disabled switch ports. Haven't measured this myself yet, but according to this http://www.8devices.com/community/viewtopic.php?f=6&t=156 it can save about 300mW of power. [juhosg: fix checkpatch warning] Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Add support for 8devices Carambola dev board.juhosg
Add support for 8devices Carambola dev board. The Carambola is a small RT3050-based development board with two ethernet ports, on-board chip antenna, usb and plenty of accessible gpio ports, sold by 8devices. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Rename POC registersjuhosg
Rename POC registers. The current code uses POC1-POC3. The datasheet uses: POC1: Port Control 0 POC1: Port Control 1 POC2: Port Control 2 So the first POC1 is a typo that should have been POC0, rename the registers to POC0-POC2 accordingly. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Minor ramips_esw.c cleanupjuhosg
Stop handling VLAN setup in the kernel. Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for WL-351 and add some extra comments. Also removes the en_vlan per-port flag that isn't very useful really, it now is only controlled by the global enable_vlan flag. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Add switch setup to uci network defaultsjuhosg
Add switch setup to uci network defaults. The 'lan' attribute is used to decide into which vlan to put the port. Currently 'disable' is never set, but the intention is to use this for devices like the 8devices Carambola, which only has two ports hooked up to the SoC. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Add swconfig support to ramips_esw.cjuhosg
Add swconfig support to ramips_esw.c This patch adds swconfig support for ramips_esw: Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external rtl8366rb on internal port 5). I've made sure that in the enable_vlan=0 case it behaves like a dumb switch, so external switches should work fine with vlans and verified this on the WL-351. The current state shown by swconfig is always read directly from HW registers, new settings only show after 'swconfig dev rt305x set apply'. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33299 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-30 21:45:00 +0000