summaryrefslogtreecommitdiff
path: root/target
AgeCommit message (Collapse)Author
2013-05-13kernel: add missing PHY ID for an AR8327 switch variantnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36630 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-13build: add config symbols for different ARM arch levelsnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36620 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-12kernel: move CONFIG_MIPS_SEAD3 to genericjogo
Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-12bcm63xx: don't build CRAMFSjogo
Don't build the CRAMFS file system module in the kernel, and save some bytes. No bcm63xx board needs this obsolete file system, neither those ones using the Redboot bootloader (liveboxes). Thus, there is no need to build it, since it has been replaced long time ago by squashfs. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-12[brcm63xx] led and buttons support for board DWV-S0jogo
Signed-off-by: Gianluca Agliozzo <gianluca05@hotmail.it> [jogo@openwrt.org: fixup patch so it actually applies] Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-12bcm63xx: remove defconfig supportjogo
All boards use uci-defaults, no need to keep defconfig support. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36610 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-12kernel: fix CVE-2013-1763 in older kernelsjogo
Newer kernels were already fixed by upstream. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36607 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-09ar71xx: set mips16 support, tune cflags for 34kc (works well on MIPS 24K as ↵nbd
well, but helps a lot for 34K and 74K) Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36600 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-09kernel: make zlib and lzo modules selectablejogo
Fixes building kmod-lib-zlib and kmod-lib-lzo if nothing depends on them. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36592 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-09kernel: b53: use correct oops for bcm5365 switchhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36589 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-09kernel: allow building zsmalloc as a module againjogo
zsmalloc was changed to a bool because of missing exports in the kernel, but we already export the required symbol, so change it back to tristate. Closes #13481. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08ar71xx: use combined kernel image in the CameoHornet templatejuhosg
This allow us to increase the kernel partition size, and ensures, that the -factory image still usable via the original interface. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36584 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08ar71xx: add profile and build image for the RNX-N360RT boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36582 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08ar71xx: add user-space model detection for the RNX-N360RT boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08ar71xx: add profile and build image for Netgear WNDAP360juhosg
[juhosg: this has been created from the following patch: http://patchwork.openwrt.org/patch/3620/ ] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36580 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08ar71xx: add user-space support for Netgear WNDAP360juhosg
[juhosg: this has been created from the following patch: http://patchwork.openwrt.org/patch/3620/ ] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36579 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08ar71xx: add kernel support for Netgear WNDAP360juhosg
Here is corrected version (only thing not working are wifi LEDs). [juhosg: this has been created from the following patch: http://patchwork.openwrt.org/patch/3620/ ] Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36578 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08kernel: update linux 3.9 to 3.9.1juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36577 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08kernel: update linux 3.8 to 3.8.12juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08ar71xx: Fix AP135 partition layoutjuhosg
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-07lantiq: enable portmaps again and set max port to 2blogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-07ramips: drop 3.7 supportblogic
Signed-off-by; John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36572 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-07ramips: properly setup the FEATURES variableblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: fix memory detection rt5350blogic
Signed-off-by: Felix Kaechele <felix@fetzig.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: enable dsp extensions for rt305x and rt3883blogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: fix fypo in ethernet driver rt288x, rt3883blogic
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: Update ARC Freestation profileblogic
These devices are actually built around the 8devices Carambola dev board. ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are supported with this image, see "ARCFlex Firmware Downloads": http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History Funnily enough if present the external USB wlan ends up being wlan-0, with the SoC device being wlan-1. - Invert port map so special handling of vlan config can be removed. - Add LED config similar to original ArcOS firmware. - Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1 - Get MACs from factory partition. - Update description to list supported devices. - Carambola uses RT3050 (not RT3052), though my Carambola CPU actually reports itself as being an RT3350 while still having RT3050F markings. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: Support setting active_low in devicetree gpio-exportblogic
Support setting active_low in devicetree gpio-export. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36563 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ralink: unbreak uart pinmux handlingblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: fix gpio base numberingblogic
make banks 0 based to unbreak userland ABI Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36561 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: add gpio base properties to dtsi filesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: unbreak rt2880 supportblogic
Signed-off-by: John Crsipin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36559 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: fix DIR-602D1 flash sizeblogic
Fix DIR-620D1 flash size. Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36558 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-04ramips: unbreak gpio handling for uart mux groupblogic
this should fix the handling of corner cases Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36543 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-03at91: build .dtb file for the CalAmp LMU500 boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36542 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-03ar71xx: Fix AP135 PCIjuhosg
AP135 has a pluggable PCIE slot unlike AP136. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-03ar71xx: add an external reset callback for ar913x and use it in ath9k - ↵nbd
should reduce the frequency of DMA stop failures Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36530 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02kernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is ↵nbd
used by iproute2 Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36529 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02bcm63xx: split into two subtargets, generic and SMPjogo
Make SMP a subtarget, since it only supports BCM6362 and BCM6368. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36527 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02bcm63xx: add SMP support for BCM6362 and BCM6368jogo
BCM6358 requires further work due to its shared TLB. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36526 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02kernel: generic: don't strip /proc/irq on SMPjogo
/proc/irq is needed for changing the SMP affinity of interrupts. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02bcm63xx: fix hsspi flash registration for BCM6362jogo
Use busnum 1 for HSSPI so it won't conflict on chips having both SPI controllers. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36524 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02bcm63xx: fix/enable livebox minipcijogo
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36523 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02atheros: remove static gpio_request() from board setup and include generic ↵jow
kmod-gpio-button-hotplug instead. This change is based on a patch by Karl Palsson <karlp@remake.is> See http://patchwork.openwrt.org/patch/3536/. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-01kernel: update linux 3.8 to 3.8.11juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36507 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-01brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patchflorian
And while at it, also include a define check for BCM6328, thanks to Gabor for spotting this. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-01brcm63xx: add missing binary operands to BCM6345 ethernet patchflorian
Thanks to Emilio Arias for reporting it. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36505 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-01brcm63xx: remove 3.7 kernel supportflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36504 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30ar71xx: rename WNR2000v3 support patchjuhosg
Update the numbering of kernel patch for supporting Netgear WNR2000v3 from 617 to 618. Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30x86/geos: switch to 3.8.10juhosg
Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36496 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 20:36:50 +0000