summaryrefslogtreecommitdiff
path: root/target/linux
AgeCommit message (Collapse)Author
2010-12-02brcm47xx: Add edimax PS1208mfg supporthauke
Thank you clemvangelis for the patches. (closes #7672) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-02[ar71xx] tune rtl8366s default config, make vlan 1 cpu port tagged and use ↵jow
eth0.1 for the lan interface - this brings the configuration more in line with other switch setups git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-01ar71xx: refresh patchesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24210 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-01generic: yet another missing config symbol for 2.6.37juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24208 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-30[ar71xx] add a new image for the TEW-652BRP which can be used with the ↵jow
bootloader recovery option git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24196 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-30[kernel] backport two changes from kernel.org:jow
65e9b62d4503849b10bedfc29bff0473760cc597 ipv6: add special mode accept_ra=2 to accept RA while configured as router c3bccac2fa76f1619dfe4fb7b9bee69de7f066d8 ipv6: add special mode forwarding=2 to send RS while configured as router git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24195 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28[brcm63xx] image Makefile: Corrected router imagename length limiting. ↵cshore
Thanks KanjiMonster for reminding me. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Add support for the T-Com Speedport W 500V.cshore
Add support for the T-Com Speedport W 500V using a special tagged image as it identifies itself as a 96348GW, but has some gpios wired differently, and also has only one ethernet port without a switch attached to it. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Add board id override fixup.cshore
Add a fixup for the kernel to check the bcm tag of the image for a boardid in the information1 field, and use that instead of the supplied one by cfe. This is triggered by a + at the start of the information1 field. Also modify the image generation to generate apropriately tagged images. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24189 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Finalize support for DSL-274xB, rev C2.cshore
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition, resulting in a kernel panic on boot. This patch adds it, and also renames the generated image name to properly reflect that it is for the revision C2, and for both the DSL-2740B and DSL-2741B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24188 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Allow 'colored' power leds.cshore
Since some devices have more than one power led, they might be separated by their color in the name. To also allow them to be on after leaving preinit, set any status led starting with 'power' to on instead of only those with the exact name of 'power'. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Don't hardcode the switch ethernet interface in preinit.cshore
Currently eth1 is hardcoded as the expected interface switches in diagmode. This patch replaces the eth1 with the ifname, and also directly tests if the interface specified by ifname has a switch attached. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Add defconfigs.cshore
Port the mechanism for different default configurations from ar71xx and use the old configuration as the default configuration. This should have no functional differences to before. While we are at it, remove the obsolete nat option. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24185 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28[ar7] refresh patches and remove trailing whitespacesflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24181 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28[ar7] refresh and refine 972-cpmac_multi_probe.patch, patch from sn9florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24180 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28[ar7] refresh 973-cpmac_handle_mvswitch.patchflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24179 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28[ar7] refresh and refine vlynq patch, patch from sn9florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24178 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28brcm47xx: remove support for old kernel versionshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24168 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28brcm47xx: use kernel 2.6.36.1 as new default kernel for this target.hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24167 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28kernel: add missing config symbols for 2.6.37-rc3hauke
Thank you maddes for reporting. (closes #8323) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-27brcm47xx: reorder patches like they were commitet upstreamhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24162 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-27remove CONFIG_ADM6996_PHY=y for ar7 and atheros - this driver is incomplete ↵nbd
and should not be used yet git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24161 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-27kernel: add missing config optionhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24157 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-25[ar7] patch 972-cpmac_multi_probe.patch correctly, thanks sn9florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-25[ar7] rename 973-cpmac_handle_mvswitch.c to 973-cpmac_handle_mvswitch.patchflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24141 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-25[ar7] handle mvswitch in cpmac, rework MII probing logic, patch from sn9 and ↵florian
Wipster git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24140 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-25[ar7] handle new revisions of vlynq wrt reset sequence, patch from sn9florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24139 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-25[ar7] increase flash window size to 32MiB, patch from sn9.florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24update to the latest stable kernelskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24[brcm63xx] image Makefile: Removed extraneous tab from Image/LimitName16 ↵cshore
macro definition. The solves the strange whitespace in front of the image name in the info1 section git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24ramips: add support for Belkin F5D8235 v2 boardjuhosg
No support for usb for now. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24generic: add rtl8366rb switch vlan fid supportjuhosg
Allows to use fids 0 to 7. Default is 0. Those who will use this don't forget to `set vlan fid` every time after `set vlan ports` if you want non default behavior. Minor changes. Version bump. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24ramips: Use NET_IP_ALIGN instead of hardcoding 2juhosg
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24ramips: DMA map the correct RX skb sizejuhosg
The skb_reserve call prior to DMA mapping the RX skb reduced the skb data len by 2. To not allow DMA to write behind the skb we should pass the correct skb data len to the device. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24ramips: Don't trigger BUG_ON due to skb allocation failurejuhosg
Instead just drop the rx'ed frame silently and reuse the already available buffer. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24122 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24ramips: Remove unnecessary skb_putjuhosg
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24121 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23[brcm63xx] image: Limited image name put into the info1 field to 16 ↵cshore
characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23linux/brcm47xx: sync yhe BCM4710 fix with the upcoming upstream patch.acoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24116 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23linux/generic: add 2.6.37 support for the Cisco 7941/7945 IP phones: ↵acoul
http://lkml.org/lkml/2010/11/21/219 (thank you Kevin Cernekee) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24114 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23linux/brcm47xx: add missing patch on r24112acoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24113 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23linux/brcm47xx: Broadcom BCM4710 does not belong in the BMIPS4KC family.acoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23linux/generic: refresh 2.6.37 patchesacoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24111 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23[gumstix] Fix ext4 buildhcg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23[gumstix] Bump kernel versionhcg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24109 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23[gumstix] Remove NAND supporthcg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24108 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22linux/brcm47xx: properly fix r24096acoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22linux/brcm47xx: mainline 2.6.37 602977b0d672687909b0cb0542ede134ed6ef858 ↵acoul
commit broke CPU revision: 00024000, MIPS (cc 0x805, rev 0x00, vendor 0x4243) functionality. Revert that patch until we get a proper fix. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24096 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22target/linux: sync kernel patches to 2.6.37-rc3acoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22remove 2.6.25 supportkaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24089 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22[coldfire]: remove 2.6.25 supportkaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24088 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-30 22:41:54 +0000