summaryrefslogtreecommitdiff
path: root/target/linux
AgeCommit message (Collapse)Author
2013-11-11brcm47xx: b44: fix logic in BUG_ON()hauke
It is a problem when phydev is not set at this position and not the other way around. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38744 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11ixp4xx: fix usb on cambria boards by using the ehci-platform drivernbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38740 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11ramips: use gpio-button-hotplug in favour of the input variantblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38735 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11ramips: make the rfkill switch work on fonera20nblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11lantiq: DGN3500 fixupsblogic
Just fixing up a few things for the Netgear DGN3500. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11lantiq: rename TDW8970 led adsl->dslblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38730 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11lantiq: update TDW8970.dts to support buttons properlyblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38728 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11lantiq: remove old hotplug handlerblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38727 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11[omap]: add missing option, enable hw rngkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11ar71xx: Use KEY_RESTART key code for the reset button on WD My Net N600 boardsjuhosg
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38720 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11ar71xx: add profile and build image for the TL-WA750RE TL-WA850RE range extenderjuhosg
Patch to add profile and build image for the tplink TL-WA750RE/WA850RE board Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38719 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11ar71xx: add user space support for the TL-WA750RE/WA850RE Range extenderjuhosg
Patch to add user space support for the TL-WA750RE/WA850RE range extender Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11ar71xx: Add kernel support for the TP-Link WA750RE / WA850RE range extenderjuhosg
Patch to add kernel support for the TP-LINK WA750RE and the WA850RE range extender Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> [juhosg: rename and refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11ar71xx: ag71xx: fix ag71xx_probe error pathjuhosg
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38716 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11bcm53xx: make bgmac workhauke
This makes bgmac work without sprom and refreshed the patches. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38715 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11kernel: bgmac: make it send and receive some packages on BCM4708hauke
This adds some more code for bgmac core rev 4 and it now restarts all cores when initializing the first one on BCM4708. I am just able to send under 100 packages and then DMA TX does not work any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38714 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-11kernel: bcma: detect pci ID 0x4313hauke
This pci ID is used by sprom less BCM4313 devices. This is a backport from the mainline kernel. This is part of #13551. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-10kernel: b53: add initial support for switches in BCM5301Xhauke
This is also known as BCM470{7,8,9}. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38712 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-10[cns3xxx]: add uImage image buildkaloz
- add building of a standard uImage along with the combined kernel+rootfs - remove 'old' image build - that was for a very old and obsolete bootloader To update the bootloader for GW2387,GW2388,GW2391 (NOR Flash) from uboot: put latest NOR bootloader on tftp server: http://svn.gateworks.com/laguna/trunk/images/u-boot_nor.bin Laguna> setenv ipaddr <localip> Laguna> setenv ipaddr <serverip> Laguna> tftpboot 0x800000 laguna/u-boot-nor.bin Laguna> erase 0x10000000 +$(filesize) Laguna> cp.b 0x800000 0x10000000 $(filesize) Laguna> reset To update the bootloader for GW2380,GW2382,GW2383 (SPI Flash) from uboot: put latest SPI bootloader on tftp server: http://svn.gateworks.com/laguna/trunk/images/u-boot_spi.bin Laguna> setenv ipaddr <localip> Laguna> setenv ipaddr <serverip> Laguna> tftpboot 0x800000 laguna/u-boot-spi.bin Laguna> erase 0x60000000 +$(filesize) Laguna> cp.b 0x800000 0x60000000 $(filesize) Laguna> reset Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-10[cns3xxx]: add pushbutton GPIO for GW2380/82/83kaloz
Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38702 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-09brcm47xx: add detection for Linksys WRT54GS V1hauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-09brcm47xx: register ADM6996L switchhauke
This patch makes it possible to use adm6996.c on first generation BCM47XX devices with ADM switches. This was tested on a WRT54GS version 1.0, thank you Dirk Neukirchen for the device. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-09kernel: adm6996: add support for ADM6996L and GPIO interfacehauke
This patch makes it possible to use adm6996.c on first generation BCM47XX devices with ADM switches. The GPIO bit banging protocol implementation was copied from the old switch driver and adapted to this driver and changed to the mainline kernel GPIO interface. The ADM6996L is different from the ADM6996M which is supported, for both specs are available in the Internet. This was tested on a WRT54GS version 1.0, thank you Dirk Neukirchen for the device. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-08[omap]: switch to 3.12, enable support for AM33xx/OMAP3kaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38692 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-08[omap]: rename the omap4 target to omapkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38691 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-08ar71xx: ag71xx: fix a race involving netdev registrationjuhosg
In particular, phy_connect before register_netdev. This is because register_netdev runs the netdev notifiers, which can race with the rest of the initialization in ag71xx_probe. In my case this manifested in two ways: 1) If ag71xx is compiled as a module and inserted after netifd has started, netifd is notified by register_netdev before the call to ag71xx_phy_connect. netifd tries to bring the interface up, which calls ag71xx_open, which in turn enters ag71xx_phy_start. This keys off ag->phy_dev (which is still NULL) and thinks this is a fixed-link board, and enters ag71xx_link_adjust. This looks at ag->speed which is not yet initialized and hits the BUG() in the switch (ag->speed) in ag71xx_link_adjust. This is the wrong code path for ag71xx_phy_start - my board has PHYs that need to be brought up with phy_start. Doing ag71xx_phy_connect before register_netdev ensures that ag->phy_dev is non-NULL before ag71xx_phy_start is ever called. 2) When ag71xx is built into the kernel, and netconsole is enabled, there is a gap in the initial burst of replayed printks right after the netdev comes up. My assumption is that netconsole is also triggered by a netdev notifier, and part of this printk burst happens before the call into ag71xx_phy_connect, so part of the burst is lost while the PHY comes up. This patch fixes the gap - all the printks before eth0 comes up are bursted in full when netconsole initializes. ag71xx_phy_connect_xxx no longer runs with a registered netdev, so the logging has been adjusted accordingly to avoid "unregistered net_device" or "eth%d" messages in dmesg. Signed-off-by: Catalin Patulea <cat@vv.carleton.ca> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38689 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07ar71xx: build image for the WD My Net Wi-Fi Range Extenderjuhosg
Patchwork: http://patchwork.openwrt.org/patch/4281/ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> [juhosg: - remove the Image/Build/CyberTANLZMA/loader macro, it is not used - move the MYNETREXT SingleProfile definition to the correct place] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38688 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07ar71xx: add user-space support for the WD My Net Wi-Fi Range Extenderjuhosg
Patchwork: http://patchwork.openwrt.org/patch/4281/ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38687 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07ar71xx: add kernel support for the My Net Wi-Fi Range Extender devicejuhosg
This patch adds a new device definition for a Western Digital device. The hardware seems to be based on Qualcomm Atheros DB120 design. Patchwork: http://patchwork.openwrt.org/patch/4281/ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> [juhosg: refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38686 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07ar71xx: image: add EOF marker to the WNDR4300 UBI imagejuhosg
Append EOF markers to the END of the UBI image file. This forces the kernel to erase all blocks after the marker even if those blocks are not empty. Additionally, the resulting image can be flashed from the original web UI now, so use '-factory' suffix for that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38683 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07kernel/3.10: add EOF marker support to the UBI layerjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07lantiq: fix TDW8970 lan/wan macblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38677 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07au1000: make sysupgrade compatible with all file system typesblogic
This patch adds support for all file system types as discussed earlier: https://lists.openwrt.org/pipermail/openwrt-devel/2013-October/022109.html This patch depends on a previous patch: https://lists.openwrt.org/pipermail/openwrt-devel/2013-October/022111.html Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07au1000: create sysupgrade binary for each file system typeblogic
This patch should prevent overriding of sysupgrade binaries in the bin directory if we build images for more then one file system type. Discussion: https://lists.openwrt.org/pipermail/openwrt-devel/2013-October/022108.html Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38674 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07lantiq: Fix ar8216 switch configuration for WBMR-HP-G300H devicesblogic
The switch is renamed to "switch0" in newer (3.10) linux kernels. Configure the switch using vlans by default and only configure the physical switch ports that are present. Signed-off-by: Richard Mortimer <richm@oldelvet.org.uk> Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07ralink: revert 38348 as it breaks network on the hame-mprblogic
https://dev.openwrt.org/changeset/38348 https://dev.openwrt.org/ticket/14403#comment:1 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07ralink: fix c&p error in gpio driverblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38668 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07lantiq: fix td-w8970 initramfs generationblogic
https://dev.openwrt.org/ticket/14417 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38667 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-07[sparc]: mark as broken (toolchain issues), bump kernel versionkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38665 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-06kirkwood: add support for dockstarluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38664 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-06ar71x: image: don't use the wndr3700 utilityjuhosg
Pass the uImage magic value directly to mkimage instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38662 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-06sunxi: drop CONFIG_DEVTMPFS optionluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38661 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-06kernel: add some config optionsluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38660 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-05ar71xx: image: fix WNDR4300 initramfs image generationjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-05ar71xx: image: allow to use optional parameters for MkuImageLzma/initramfsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-05[generic/3.12]: update for 3.12 finalkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-05brcm47xx: fix detection of Asus RT-N12B1 and Netgear WNR3500Lhauke
This closes #14367 and #14328. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38656 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-05ar71xx: generate recovery image for WNDR4300juhosg
Extended the Makefile to generate a working factory reset image for Netgear WNDR4300. The image uses UBI with two volumes squashfs (rootfs) and JFFS2 (rootfs_data). In order to make stock U-Boot happy, a fake rootfs image is placed into the last erase block of the kernel partition. Signed-off-by: Stefan Agner <stefan@agner.ch> [juhosg: - restore the NetgearNAND/initramfs macro, - remove unused {Squash,Ubi}fsTemplate macros, - remove board specific mtd options from CONFIG_CMDLINE, append the board specific ubi.mtd parameter to the kernel command line instead, - increase kernel partition size to 2MiB, - use board specific ini file for ubinize, - put jffs2 eof mark into the rootfs_data ubi volume, - use KDIR_TMP for temporary images, - use the squashfs-raw image, - increase kernel partition size to 2MiB, - use a local ubinize macro, - fix macro parameter comments, - put the fake rootfs into the last erase block of the kernel partition, - move Image/Build/NetgearNAND/buildkernel macro before define Image/Build/NetgearNAND, - don't use the wndr3700 utility, use '-M' parameter of mkimage to set the uImage magic, - use '-recovery' suffix for the generated image, it is only usable via the fw_recovery function of the bootloader, - update commit log] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38655 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-05kernel: update 3.10 to 3.10.18juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-05sunxi: add new targetluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38651 3c298f89-4303-0410-b956-a3cf2f4a3e73