summaryrefslogtreecommitdiff
path: root/target/linux
AgeCommit message (Collapse)Author
2011-10-30ar71xx/sysupgrade: use $magic_long instead of $magic when comparing with a ↵juhosg
32-bit value Aparently $magic_long was meant here instead of $magic when comparing with 32-bit values. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28678 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-29omap24xx: Refresh 3.1 configmb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28677 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-29omap24xx: Refresh 3.1 patchesmb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28676 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-29Fix tusb patchmb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28675 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-29omap24xx: Fix MUSB compilemb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28674 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-29omap24xx: Add n800 touchscreen and keypad drivers.mb
Thanks to Marat Radchenko. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28673 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-29omap24xx: Add 3.1 patchset.mb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-27ar71xx: fix typos in image/Makefilejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28618 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-27ar71xx: add initial support for the OpenMesh OM2P boardjuhosg
Based on a patch by Marek Lindner <marek@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-27ar71xx/all0258n: fix partition layoutjuhosg
A miscalculation in the original patch makes OpenWrt destroy the failsafe image. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-26Update my email addressmb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-26x86: disable crashlog, ioremap of RAM does not work properly herenbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-26ar71xx: create image for the WNDR3800juhosg
This adds support for the Netgear WNDR3800, it is almost the same as the WNDR3700v2. It just has more RAM so the hd_id had to be adjusted. Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28597 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-25target: remove CONFIG_IDE_PROC_FS support as welljow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28586 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-25brcm47xx: revert accidentially added EARLY_PRINTK symbol from previous commitjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28585 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-25target: globally disable BSD process accountingjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28584 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24ramips: Support for NexAira BC2juhosg
The preconfiguration of the USB LED has benn move to the /etc/uci-defaults/leds script. [juhosg] Signed-off-by: Adam Porter <porter.adam at gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24ramips: fix switch-port assignment for HW550-3Gjuhosg
WAN is on swtich port 0 for Aztech HW550-3G. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28570 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24ramips: combine led setup for all boards in one filejuhosg
This removes unnecessary duplication and simplifies led setup for new boards. It would be a one line change most likely. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24ar71xx: build image for the Buffalo WHR-HP-G300Njuhosg
Based on a patch by Yoichi Shinoda <shinoda@jaist.ac.jp> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24ar71xx: Buffalo WHR-HP-G300N kernel supportjuhosg
The initial support for the Buffalo WHR-HP-G300N box. The code was confirmed to boot and run, but not tested in depth. Known problem: iw phy phy0 info shows: Coverage class: 0 (up to 0m) Available Antennas: TX 0 RX 0 Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24ar71xx: build image for the Allnet ALL0258N boardjuhosg
Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24ar71xx: add kernel support for the Allnet ALL0258N boardjuhosg
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge. The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio, it got 8MB of NOR and 32MB SDRAM. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24ar71xx: don't override CONFIG_FSNOTIFYjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28563 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-24[ar71xx] base-files: make sure inittab-console-fixup returns with success ↵jow
(#10275) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-22[target] x86: allow VDI & VMDK images for all subtargets (closes: #10255)nico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28518 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-20linux: generic: refresh patches for 3.1-rc10jogo
Hopefully the last one and identical to final. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28492 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-11linux: ar71xx: add support for Mikrotik Routerboard RB493Gjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28423 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-11ar71xx: add a workaround for ar8316 not always driving the TA bit to lowjogo
AR8316 behind a GPIO bitbanged MDIO bus fails to drive the turnaround bit to low despite returning a valid value. Ignore it and just use the returned value anyway. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28422 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-11ar8216: use mdiobus_{read,write} to ensure proper lockingjogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28421 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-10[lantiq]blogic
* update patches to 3.0 * add basic vr9 support * backport 3.1 fixes * backport 3.2 queue (falcon) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28405 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-08ag71xx: close a race between the phy state machine and link statejogo
A fast stop/start cycle could leave the ag71xx interrupts and tx engine disabled when using a phy driver with a fixed link and the start/stop happens between two phy state machine polls. Prevent this by always forcing the link down on stop regardless of phy state and having a phy connected. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-06[generic] add IDs for Huawai K3770, K3771, K4510 and K4511 to option driverjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28376 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-04[malta] add missing kernel config symbolsflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28363 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-03Was specifying input-polled-keys and not input-keys-polled as the module name.cshore
Philip Prindeville - 2011-10-03 03:58:17 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28357 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-03Add patch for linux-3.0 as well.cshore
Fix typo from previous submission with input-keys-polled. Philip Prindeville - 2011-10-03 01:44:55 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28356 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-03New x86 platform specific symbol needed for 3.1-rc3.cshore
--- Attaching the correct file this time... Philip Prindeville - 2011-09-07 07:01:42 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28355 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-03A lot of these options get set automatically when Geode is selected.cshore
Don't make the config more complicated than it needs to be. Philip Prindeville - 2011-08-29 03:15:27 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28353 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-30[brcm47xx]: add vlan definitions for Siemens SE505v2florian
Hi, this patch adds the correct vlan definitions for the Siemens SE505v2. It applies to trunk as well as backfire (please apply here too). On backfire this also patches brcm-2,4, because brcm47xx base-files is just symlinked to brcm-2.4. It also fixes two whitespace issues. Tested with brcm47xx on both trunk and backfire branch and works as expected. Signed-off-by: Manuel Munz <freifunk@somakoma.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28336 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-26[lantiq-wdt]blogic
The enable function was using the global timeout variable for local operations. This resulted in the value of the global variable being corrupted, thus breaking the code. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-26[lantiq]blogic
* remove obseleted m25p80 patch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28309 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-26[lantiq]blogic
* rebase 3.0 patches * fold some fixes into existing patches git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-23ar71xx: fix MAC addresses on the DIR-825-B1 boardjuhosg
Patch-by: Lukas Kuna git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28295 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-23ar71xx: enable login only on the system console by defaultjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-23linux/generic: commit an upstream kernel 3.0 patch (fixes busubox-1.19.2 ↵acoul
build failure) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21ar71xx: build images for the TP-Link TL-WR703N v1 boardjuhosg
Based on a patch by dongyuqi <729650915@qq.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21ar71xx: add support for the TP-Link TL-WR703N v1 boardjuhosg
Based on a patch by dongyuqi <729650915@qq.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21ar71xx: add AR933x specific USB setup functionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21ar71xx: add ar71xx_device_reset_rmw helperjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-21ar71xx: fix copy&paste bug in WZRHPAG300H profile descriptionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28274 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-29 19:29:12 +0000