summaryrefslogtreecommitdiff
path: root/target/linux
AgeCommit message (Collapse)Author
2010-12-08ramips: ramips_esw: add defines for switch register offsetsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24333 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08ramips: ramips_esw: don't touch GPIO_PURPOSE registerjuhosg
It must have been set by the board initialization code. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24332 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08ramips: ramips_esw: convert it to be a platform driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08ramips: ramips_esw: move hardware initialization into a separate functionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24330 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08ramips: ramips_esw: use a private structure for the functionsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08ethernet driver fixup for ppc4xxkaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24328 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08[brcm63xx] Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are ↵cshore
going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24316 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08[brcm63xx] Profiles: Make buttons and led modules included by default so ↵cshore
that failsafe will work in the case of builds for releases. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08[brcm63xx] Profiles: Move wpad-mini to the profiles that use it, rather than ↵cshore
default for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07[generic] flash_chips: Added Macronix MX29LV640T Flash Chip support ↵cshore
previously mistakenly added to brcm63xx. Thanks blunoise. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24313 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07[brcm63xx] patches: Renamed 150-led_count to 141-led_count so it comes ↵cshore
before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix ↵cshore
MX29LV640T." This reverts commit 43511418ae2771a6662a83a254f06e37f4ac19e5. It belongs in generic not brcm63xx. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T.cshore
Thanks blunoise git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07[brcm63xx] boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are ↵cshore
different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07[brcm63xx] patches: Refreshed patches after led_countcshore
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07[brcm63xx] board definitions: Added patch for calculating led count, which ↵cshore
was part of the patch removed in the previous commit git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-07[brcm63xx] Remove patch 140-new_bcm96348gw_leds because it is really the ↵cshore
GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-06kernel: fix cryptodev with kernel >= 2.6.35hauke
The fix is from http://sourceforge.net/mailarchive/forum.php?thread_name=20100906035717.GA7562%40mcafee.com&forum_name=ocf-linux-users Thank you tripolar for reporting the issue and finding a solution for it. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-06[brcm63xx] base-files: Added the preinit information for reset button and ↵cshore
preinit indication led, and preinit interface git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-06[brcm63xx] board definition: Fixed CPVA642 LED definitionscshore
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-06[brcm63xx] board definitions: Added CPVA642 GPIO leds and buttons and ↵cshore
refreshed patches later in series due to fuzz git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-06[bcm63xx] base-files: Added network defconfig because board only has one ↵cshore
ethernet (4-port switch) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-05ramips: add support for 2.6.36juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24270 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-05ramips: default profile fixjuhosg
Fix package names in default profiles. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24269 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-05ramips: use tabs instead of spaces in mach-f5d8235-v2.cjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-05brcm47xx: do not read from CFEhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24267 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-05brcm47xx: backport patch from kernel 2.6.37hauke
Backport patches from r24162 brcm47xx: reorder patches like they were commitet upstream git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24266 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-05brcm47xx: use on common files dirhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-05[target/mpc85xx]: preliminary support for Freescale MPC85xx based boardskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24259 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-04ar71xx: work around a PCI controller bug which causes reads to the ↵nbd
PCI_COMMAND register to return bogus values - properly fixes ath9k module reload issues git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24236 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-03[mpc83xx]: remove unused kernel versions, make 2.6.36 the defaultkaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24223 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-02brcm47xx: Add edimax PS1208mfg supporthauke
Thank you clemvangelis for the patches. (closes #7672) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-02[ar71xx] tune rtl8366s default config, make vlan 1 cpu port tagged and use ↵jow
eth0.1 for the lan interface - this brings the configuration more in line with other switch setups git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-01ar71xx: refresh patchesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24210 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-01generic: yet another missing config symbol for 2.6.37juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24208 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-30[ar71xx] add a new image for the TEW-652BRP which can be used with the ↵jow
bootloader recovery option git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24196 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-30[kernel] backport two changes from kernel.org:jow
65e9b62d4503849b10bedfc29bff0473760cc597 ipv6: add special mode accept_ra=2 to accept RA while configured as router c3bccac2fa76f1619dfe4fb7b9bee69de7f066d8 ipv6: add special mode forwarding=2 to send RS while configured as router git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24195 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28[brcm63xx] image Makefile: Corrected router imagename length limiting. ↵cshore
Thanks KanjiMonster for reminding me. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Add support for the T-Com Speedport W 500V.cshore
Add support for the T-Com Speedport W 500V using a special tagged image as it identifies itself as a 96348GW, but has some gpios wired differently, and also has only one ethernet port without a switch attached to it. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Add board id override fixup.cshore
Add a fixup for the kernel to check the bcm tag of the image for a boardid in the information1 field, and use that instead of the supplied one by cfe. This is triggered by a + at the start of the information1 field. Also modify the image generation to generate apropriately tagged images. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24189 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Finalize support for DSL-274xB, rev C2.cshore
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition, resulting in a kernel panic on boot. This patch adds it, and also renames the generated image name to properly reflect that it is for the revision C2, and for both the DSL-2740B and DSL-2741B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24188 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Allow 'colored' power leds.cshore
Since some devices have more than one power led, they might be separated by their color in the name. To also allow them to be on after leaving preinit, set any status led starting with 'power' to on instead of only those with the exact name of 'power'. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Don't hardcode the switch ethernet interface in preinit.cshore
Currently eth1 is hardcoded as the expected interface switches in diagmode. This patch replaces the eth1 with the ifname, and also directly tests if the interface specified by ifname has a switch attached. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28bcm63xx: Add defconfigs.cshore
Port the mechanism for different default configurations from ar71xx and use the old configuration as the default configuration. This should have no functional differences to before. While we are at it, remove the obsolete nat option. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24185 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28[ar7] refresh patches and remove trailing whitespacesflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24181 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28[ar7] refresh and refine 972-cpmac_multi_probe.patch, patch from sn9florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24180 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28[ar7] refresh 973-cpmac_handle_mvswitch.patchflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24179 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28[ar7] refresh and refine vlynq patch, patch from sn9florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24178 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28brcm47xx: remove support for old kernel versionshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24168 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-28brcm47xx: use kernel 2.6.36.1 as new default kernel for this target.hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24167 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-20 01:34:53 +0000