summaryrefslogtreecommitdiff
path: root/target/linux
AgeCommit message (Collapse)Author
2013-09-15kernel: b53: fix vlan write for BCM5325 revison 3+hauke
These switches are integrated in some recent BCM53XX and BCM47XX SoCs like the BCM53572. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15brcm47xx: bgmac: fix internal switch initializationhauke
Some devices (BCM4749, BCM5357, BCM53572) have internal switch that requires initialization. We already have code for this, but because of the typo in code it was never working. This resulted in network not working for some routers and possibility of soft-bricking them. Use correct bit for switch initialization and fix typo in the define. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14brcm47xx: detect Asus RT-N10hauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14kernel: b53: use hard coded switch reset gpio on some boards.hauke
The Linksys wrt310n v1 does not have a robo_reset config variable in nvram, but GPIO Pin 8 is the pin needed for resetting the external switch, Linksys hard coded it into their source code. Thank you Devastator for testing. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37988 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14kernel: b53: add soft reset for BCM539x switcheshauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37987 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14brcm47xx: tg3: use the phy address from et0phyaddr and not the default phy ↵hauke
address. Thank you Devastator for testing. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37986 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14generic/3.10: remove unused defines from the rootfs split patchjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-14generic/3.10: reduce number of ifdefs in the rootfs split codejuhosg
Use the config_enabled() macro where it is possible. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13imx6: add network defaults for GW5400-Aluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37979 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13brcm47xx: board detection, GPIO for Linksys E1000 V2.1hauke
This patch adds board detection for the Linksys E1000 V2.1 router, as well as GPIO support for same. This fixes bug #14135. Currently, wired networking isn't working on the router, and I haven't tried the wireless, but with this patch, OpenWRT successfully boots, and all the LEDs and buttons work properly. Signed-off-by: Zachary Catlin <zcatlin@indiana.edu> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37977 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13ar71xx: refresh patchesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37976 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13generic/3.10: refresh patchesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13generic/3.10: rename mtd patchesjuhosg
- change patch numbers to group the related stuff together, - add mtd prefix where it is missing, - use hyphens in the patch names Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13cns21xx: remove 3.8 supportjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37973 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13cns21xx: switch to 3.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13cns21xx: add support for 3.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13brcm47xx: detect WRT310NV1hauke
Thanks Devastator for testing git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37969 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13cns21xx: make cns21xx-ehci a separate driverjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37968 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13cns21xx: disable legacy PTY devicesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37967 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13cns21xx: fix broken case statement in led defaults filejuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37966 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13cns21xx: enable XZ_DEC_ARM and XZ_DEC_BCJ kernel optionsjuhosg
Squashfs is unable to decompress some blocks without that: [ 0.970000] SQUASHFS error: xz_dec_run error, data probably corrupt [ 0.980000] SQUASHFS error: squashfs_read_data failed to read block 0x29a72 [ 0.990000] SQUASHFS error: Unable to read fragment cache entry [29a72] [ 1.000000] SQUASHFS error: Unable to read page, block 29a72, size 14c50 [ 1.010000] SQUASHFS error: Unable to read fragment cache entry [29a72] [ 1.020000] SQUASHFS error: Unable to read page, block 29a72, size 14c50 [ 1.260000] SQUASHFS error: xz_dec_run error, data probably corrupt Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37965 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13ar71xx: add support for TL-MR3040 v2juhosg
This patch adds support for building firmware images for the TP-Link TL-MR3040 v2. Tested and working on v2.1 hardware. Signed-off-by: Mads Hansen <d@taba.se> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37964 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-13ar71xx: add wireless bgn led support for dir-825-c1juhosg
I checked the GPL code drop from D-Link and tried to get the wireless and LAN switch LEDs to light up. I found some references in AthSDK/www/DIR-825_C1/bsp.h as well as AthSDK/www/DIR-825_C1/rootfs/etc/sysconfig/S2gpio.sh, but in the end I only got the led for 2.4GHz to work. Anyway, here's the patch. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37963 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-12brcm47xx: remove support for kernel 3.8hauke
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37959 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-12brcm47xx: add default config for new kernel config optionhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-12kernel: update bcma and ssb to wireless-testing master-2013-09-09hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37957 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-12kernel: add support for ESMT F25L32PA with upstream submissionluka
Signed-off-by: Flavio Silveira <fggs@terra.com.br> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11kernel: align the skb padding to power of twonbd
The skb is usually started by a padding which allows the protocols in the network stack to add their headers in front of the payload. The skb can be reallocated in case the preallocated padding is not large enough. This can for example happen in the function __skb_cow which will check the requested extra headroom and allocate more buffer when the requested headroom is bigger than the available one. The extra buffer is aligned again to the multiple of the NET_SKB_PAD of the target architecture. The macro used to create the multiple of the NET_SKB_PAD is written in a way which allows only values power two as alignment parameter. The currently used value of 48 bytes can not be written as n ** 2 but as 2 ** 4 + 2 ** 5. The extra buffer is therefore not always the multiple of 48 but can be 16, 64, 80, 128, 144 and so on. The generated values are also not monotonic (48 requested bytes are mapped to 80 allocated bytes and 49 requested bytes are mapped to 64 allocated bytes). These unexpected small values result in more reallocations of the buffer. This was noticed prominently during tests between two QCA9558 720 MHz devices which were connected via ethernet to PCs and had a HT40 802.11n 3x3 link between each other. The throughput PC-to-PC during iperf TCP runs increased reliable from 186 Mibit/s to 214 Mibit/s in one direction and from 195 Mibit/s to 220 Mibit/s in the other direction. This is a performance increase of ~14% just by reducing the amount of reallocations. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37948 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11kernel: fix broken depends syntax introduced in r37933florian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37942 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-11kernel: Fix FIQ code on VIVT CPUs (#14145)florian
Backport an upstream patch to fix FIQ code on VIVT CPUs Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37940 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-10imx6: backport ahci supportluka
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37936 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-10imx6: add i2c retry on NAKluka
Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-10imx6: add gpio sysfs supportluka
Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-10kernel: allow hwmon GSC driver for all targetsluka
- enable using hwmon GSC driver on all targets - add a kmod package for it Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37933 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-10kernel: fix arch-dependent bug in hso modulenbd
Currently, the module causes an oops at least on rt5350. These patches have been accepted upstream at: git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-07brcm47xx: add me as maintainerhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37916 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-07ar71xx: use the lzma loader for the WRT160NLjuhosg
Partition layout before: 0x000000040000-0x0000001a0000 : "kernel" 0x0000001a0000-0x0000007e0000 : "rootfs" mtd: partition "rootfs" set to be root filesystem mtd: partition "rootfs_data" created automatically, ofs=0x350000, len=0x490000 0x000000350000-0x0000007e0000 : "rootfs_data" after: 0x000000040000-0x000000140000 : "kernel" 0x000000140000-0x0000007e0000 : "rootfs" mtd: partition "rootfs" set to be root filesystem mtd: partition "rootfs_data" created automatically, ofs=0x2f0000, len=0x4f0000 0x0000002f0000-0x0000007e0000 : "rootfs_data" Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37915 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-07ppc40x: remove 3.8 supportjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37914 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-07ppc40x: switch to 3.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37913 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-07ppc40x: add support for 3.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37912 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-06brcm63xx: drop linux 3.9 supportjogo
It is EOL since quite a while, so no need to keep it around. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-06brcm63xx: switch to linux 3.10jogo
3.10 is stable enough, and 3.9 is EOL since a while. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05kernel: b53: support phy ids for BCM5365jogo
BCM5365 (and probably other older variants) use a different phy id, so the phy driver never attached for them. Fix this by adding the appropriate phy id to the fixup and the phy driver. Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-05Add missing symbolkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37897 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-04kernel: b53: allow access the MIB counters on BCM5365hauke
b53_no_ops has no elements and b53_port_ops has one element, this makes the code access some random memory when trying to access the mib counter functions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-03ar71xx: fix NetGear initramfs image namesjuhosg
The '-initramfs' string is duplicated in the image names, fix it. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02kernel: update 3.10 to 3.10.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: reorder Image/Build/* macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: simplify more oneliner macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-02ar71xx: image: simplify oneliner loader macrosjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37887 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-26 22:09:42 +0000