summaryrefslogtreecommitdiff
path: root/target/linux
AgeCommit message (Collapse)Author
2013-05-06ramips: fix memory detection rt5350blogic
Signed-off-by: Felix Kaechele <felix@fetzig.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: enable dsp extensions for rt305x and rt3883blogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: fix fypo in ethernet driver rt288x, rt3883blogic
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: Update ARC Freestation profileblogic
These devices are actually built around the 8devices Carambola dev board. ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are supported with this image, see "ARCFlex Firmware Downloads": http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History Funnily enough if present the external USB wlan ends up being wlan-0, with the SoC device being wlan-1. - Invert port map so special handling of vlan config can be removed. - Add LED config similar to original ArcOS firmware. - Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1 - Get MACs from factory partition. - Update description to list supported devices. - Carambola uses RT3050 (not RT3052), though my Carambola CPU actually reports itself as being an RT3350 while still having RT3050F markings. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: Support setting active_low in devicetree gpio-exportblogic
Support setting active_low in devicetree gpio-export. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36563 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ralink: unbreak uart pinmux handlingblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: fix gpio base numberingblogic
make banks 0 based to unbreak userland ABI Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36561 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: add gpio base properties to dtsi filesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: unbreak rt2880 supportblogic
Signed-off-by: John Crsipin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36559 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: fix DIR-602D1 flash sizeblogic
Fix DIR-620D1 flash size. Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36558 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-04ramips: unbreak gpio handling for uart mux groupblogic
this should fix the handling of corner cases Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36543 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-03at91: build .dtb file for the CalAmp LMU500 boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36542 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-03ar71xx: Fix AP135 PCIjuhosg
AP135 has a pluggable PCIE slot unlike AP136. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-03ar71xx: add an external reset callback for ar913x and use it in ath9k - ↵nbd
should reduce the frequency of DMA stop failures Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36530 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02kernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is ↵nbd
used by iproute2 Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36529 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02bcm63xx: split into two subtargets, generic and SMPjogo
Make SMP a subtarget, since it only supports BCM6362 and BCM6368. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36527 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02bcm63xx: add SMP support for BCM6362 and BCM6368jogo
BCM6358 requires further work due to its shared TLB. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36526 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02kernel: generic: don't strip /proc/irq on SMPjogo
/proc/irq is needed for changing the SMP affinity of interrupts. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02bcm63xx: fix hsspi flash registration for BCM6362jogo
Use busnum 1 for HSSPI so it won't conflict on chips having both SPI controllers. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36524 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02bcm63xx: fix/enable livebox minipcijogo
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36523 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-02atheros: remove static gpio_request() from board setup and include generic ↵jow
kmod-gpio-button-hotplug instead. This change is based on a patch by Karl Palsson <karlp@remake.is> See http://patchwork.openwrt.org/patch/3536/. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-01kernel: update linux 3.8 to 3.8.11juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36507 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-01brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patchflorian
And while at it, also include a define check for BCM6328, thanks to Gabor for spotting this. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-01brcm63xx: add missing binary operands to BCM6345 ethernet patchflorian
Thanks to Emilio Arias for reporting it. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36505 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-01brcm63xx: remove 3.7 kernel supportflorian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36504 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30ar71xx: rename WNR2000v3 support patchjuhosg
Update the numbering of kernel patch for supporting Netgear WNR2000v3 from 617 to 618. Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30x86/geos: switch to 3.8.10juhosg
Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36496 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30linux/3.9: implement pcibios_get_phb_of_node for MIPSjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30linux/3.8: use backported pcibios_get_phb_of_node patchesjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36494 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30kernel: update linux 3.8 to 3.8.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36493 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30at91: add missing config symbolsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36492 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30linux/3.{8,9}: add missing symbolsjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36491 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30linux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODELjuhosg
It is forced to 'y' since r36342. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30ramips: move dlink profile to correct sub folder - 2nd tryblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36489 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30ramips: move dlink profile to correct sub folderblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28broadcom-diag: support for the WNDR3700v3hauke
I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the bootloader and stock firmware will accept. The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving its LEDs through an HC164 8-bit shift register. Signed-off-by: Owen Kirby <osk@exegin.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36482 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28brcm47xx: use kernel 3.8.10 as default kernelhauke
The biggest change with this kernel is a new partition parser. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36480 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28brcm47xx: add board detection for NETGEAR WNDR4500 V2hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36478 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28kernel: fix a memory leak in split_rootfs_data()hauke
allocate_partition() copies all the content of dpart into a new struct. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing ↵hauke
master-2013-04-26. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28kernel: update linux 3.9 patches to rc8jogo
Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36469 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-28kernel: add missing bcma defines and header file for bcrmfmacjogo
Fixes build failure when having kmod-mmc and brcmfmac selected. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36468 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26ar71xx: add user-space support for WNR2000v3juhosg
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36461 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26ar71xx: add profile and build image for WNR2000v3juhosg
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26ar71xx: Add Netgear WNR2000v3 supportjuhosg
Network connectivity works fine (LAN and WAN). For GPIOs, only pwr led and the green wan leds are supported for now. Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26ar71xx: add profile and build image for the TL-WR720N v3 boardjuhosg
Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26ar71xx: add user-space support for the TL-WR720N v3 boardjuhosg
Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36457 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26ar71xx: add kernel support for TPLINK WR720N v3juhosg
Add support for TPLINK WR720N v3 which has 4MB flash, 32MB ram, 2 ethernet interfaces, 1 USB 2.0 port. The patch is mostly a modification from mach-tl-wr703n.c. GPIO numbers for the slider switch is from mach-tl-mr3020n.c. Tested on my device and they worked fine. Signed-off-by: yousong <yszhou4tech@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36456 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26mpc85xx: Add subtargets Generic and P1020juhosg
Only difference between Generic and P1020 is that P1020 enables SMP with two CPUs in the kernel config. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26kernel: update linux 3.8 to 3.8.9juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36453 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 14:38:20 +0000