summaryrefslogtreecommitdiff
path: root/target/linux
AgeCommit message (Collapse)Author
2010-04-22[brcm63xx] alwasy read imagetag with 64K erase block sizeflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21085 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22[octeon] remove simulator profileflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21084 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttonsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22kernel: refresh patches for 2.6.34-rc5 and update md5sumjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21082 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22kernel: refresh patches for 2.6.33.2, and drop md5sum for older 2.6.32 kernelsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21081 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-21ar71xx: reduce button threshold value on the NBG460 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-21ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttonsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-21kernel: add KEY_WPS_BUTTON definitionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21073 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-20rb532: remove bogus 802.1q kernel config overidenbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-20brcm47xx: fix r21042, nuke (boardnum == 42 section)acoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21047 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-20brcm47xx: fix ethernet link state (closes #7056)acoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21042 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-20atheros: refresh 2.6.32 patchesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21039 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-20atheros: register wmac device only if it is enabled in the board configjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21038 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-20ar71xx: fix mtd_layout for the DIR-615-C1 and similar devicesjuhosg
* Thanks to Yury Polyanskiy for the report git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21036 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-19ppc40x: sync kernel configjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21031 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-19target/ramips: fix another typo from [20834] (closes: #7182)nico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21012 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-19[xen] add missing kernel symbols (#7189)jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-18brcm47xx: allow isdn on brcm47xxhauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-18kernel: refresh patches with 2.6.34-rc4hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-18brcm47xx: refresh patcheshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20996 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-18kernel: add missing symbolshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-18brcm47xx: fix build of tg3 for kernel 2.6.34hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-18kernel: fix build with kernel 2.6.34-rc4hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-18kernel: add missing symbolshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20991 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-18ar71xx: adding support for zyxel nbg460n/550n/550nh boardsjuhosg
This patch adds support for the zyxel nbg460n/550n/550nh routers. Currently this only works if a second stage bootloader is also flashed, as the used switch needs extra initialization. Signed-off-by: Michael Kurz <michi.kurz@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-18ppc40x: build initramfs images for the OpenRB/Magicbox boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-17kernel: refresh 2.6.32 patchesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-17ppc40x: fix MagicBox partition tablejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20951 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-16gemini: add support for wiligear wbd-222 (patch by Darius Augulis)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20949 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-16gemini: either scatter/gather dma or hw checksum breaks ethernet, comment ↵nbd
out the define that enables both git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20940 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-16swconfig: Add cpu port index to help output.juhosg
Let swconfig provide the cpu port index in its help page. This is needed as e.g. Atheros switches have their cpu port at port 0, not port 5. This could allow e.g. luci to get a rough overview of the layout of the switch. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20939 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-16atheros: nuke clocksoure init patchjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20937 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-16ppc40x: enable USB supportjuhosg
Cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20933 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-16ppc40x: add isp116x-hcd to the device tree for the OpenRB boardjuhosg
Cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20932 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-16ppc40x: make isp116x-hcd driver usable on the OpenRB boardjuhosg
Cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-16ppc40x: add more EBC_BXCR definesjuhosg
Cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20930 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-16ppc40x: move perwe fixup into a separate functionjuhosg
Cc: backfire@openwrt.org git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20929 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-16brcm47xx: fix ide drive assignment (closes #7061)acoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20924 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-16[malta]jow
- enable PCI - add kmod-pcnet32 to default packages - make kmod-pcnet32 available for malta target git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20923 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-15ar71xx: fix up alignment handlingnbd
- on ar724x, rx buffers can be aligned with an offset of 2, which keeps the ip header aligned - alignment offset is only added if the ar8216 workaround is not active and the phy driver does not advertise its own packet alignment - ar71xx and ar91xx can not handle rx alignment offsets, however taking a hit on unaligned exceptions seems to have less overhead than re-aligning the data for large packets - use memmove to re-align small packets, if necessary tested on ar9132, ar7240 and ar7242 based devices without ar8216 headers git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-15brcm47xx: add preliminary 2.6.34 supportacoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-152.6.34: fix kzalloc erroracoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-14target/adm5120: fix image building after r20834nico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20855 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-14target/ixp4xx: fix image building after r20834 (closes: #7157)nico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20854 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-14tools/firmware-utils/imagetag: Fixed Pirelli Alice Gate CRC calculation in ↵cshore
imagetag (was invalid strings in bcm_tag.h). Closes #7120 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-13[brcm-2.4] add Buffalo WHR-G125 specifc switch quirks to netconfig, shorten ↵jow
code by merging identical fixes git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-13add lzma/jffs2 patches for 2.6.34acoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-13don't use lzma/jffs2 on <2.6.33, set lzma/jffs2 as default for >=2.6.33. ↵acoul
switch verbose mode on compresor statistics. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-13[mx2] vp6500: Add backlight devicelars
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-13ar71xx: fix image builds (broken by r20834)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20840 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 02:26:12 +0000