summaryrefslogtreecommitdiff
path: root/target/linux
AgeCommit message (Collapse)Author
2012-11-11[au1000] add support for Linux 3.6florian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34156 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11[au1000] split kernel config between generic, au1500 and au1550florian
Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34155 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11[ar7] add support for Linux 3.6florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34154 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11[ar7] move files directory to files-3.3florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34153 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11brcm47xx: remove ssb-gige packagehauke
CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more. The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34150 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11[ar7] generate image for AC49xflorian
Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34149 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11[ar7] create AC49x subtargetflorian
Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34148 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11[ar7] create generic subtargetflorian
Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34147 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11[ar7] detect AC49x flash partitionsflorian
Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34146 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11[ar7] support AC49x bootloader environmentflorian
Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34145 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11[ar7] add AudioCodes AC49x platform support to kernelflorian
Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34144 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-11[ar7] free memory below kernel offsetflorian
Some bootloaders (e.g. PSPBoot on AC49x) have a load-offset, this frees that memory region so it is usable for Linux. Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10x86/generic: don't disable usbfs (#12452)jow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34139 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10bcm63xx: fix compilation with kmod-ohci enabled with 3.6jogo
Fixes the following error: drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start': drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration] Reported-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34138 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10bcm63xx: add two missing usb patches to 3.6jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-10bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34136 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09cns3xxx: clean up pcie patcheskaloz
Combine two pcie patches (2nd patch undid the 1st patch) together and refresh the other affected patches Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34132 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09[lantiq] add more profilesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09[lantiq] a few more dts files (WIP)blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09[lantiq] add mtd split and atm patchblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09x86: use $(strip) for the at_keyboard checknbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09x86: only enable at_keyboard for the generic and kvm_guest subtargets to ↵nbd
avoid hangs on alix2 and others (thx, russell) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09generic: sanitize deps_initramfs listjuhosg
If any filename in the intramfs dependency list contains a colon, that causes a kernel build error like this: /devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns. Stop. make[5]: *** [usr] Error 2 Fix it by removing such filenames from the deps_initramfs list. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-08cns3xxx: exit from laguna late_initcall if not running on laguna boardluka
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34120 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-08cns3xxx: add PPS support for lagunakaloz
Many Laguna products have on-board GPS with Pulse-per-second (PPS) support. This patch adds kernel support (statically) and adds the platform data in laguna board support. Signed-off-by: Tim Harvey <tharvey@gateworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-08[cns3xxx]: fixup symbol selectionkaloz
SMP already selects HAVE_ARM_TWD and HAVE_ARM_SCU, ARCH_CNS3XXX already selects MIGHT_HAVE_PCI git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34114 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07cns3xxx: fix coding style in board scriptluka
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34113 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07[ramips] adds fon20n profileblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07ramips: use kernel 3.6.6blogic
## Booting image at 80800000 ... Image Name: MIPS OpenWrt Linux-3.6.6 Created: 2012-11-06 14:19:54 UTC System Control Status = 0x20440000 Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 3560768 Bytes = 3.4 MB Load Address: 80000000 Entry Point: 80000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80000000) ... ## Giving linux memsize in MB, 32 Starting kernel ... [ 0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 0001964c (MIPS 24KEc) [ 0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x01ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x01ffffff] [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Writing ErrCtl register=0000c388 [ 0.000000] Readback ErrCtl register=0000c388 [ 0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem) [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:48 [ 0.000000] console [ttyS1] enabled, bootconsole disabled [ 0.000000] console [ttyS1] enabled, bootconsole disabled [ 0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952) [ 0.090000] pid_max: default: 32768 minimum: 301 [ 0.100000] Mount-cache hash table entries: 512 [ 0.110000] NET: Registered protocol family 16 [ 0.120000] MIPS: machine is Allnet ALL0239-3G [ 0.140000] bio: create slab <bio-0> at 0 [ 0.150000] Switching to clocksource MIPS [ 0.160000] NET: Registered protocol family 2 [ 0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.200000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.210000] TCP: reno registered [ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.240000] NET: Registered protocol family 1 [ 5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 5.490000] msgmni has been set to 52 [ 5.500000] io scheduler noop registered [ 5.510000] io scheduler deadline registered (default) [ 5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A [ 5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A [ 5.560000] physmap platform flash device: 00800000 at bf000000 [ 5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000 [ 5.600000] Amd/Fujitsu Extended Query Table at 0x0040 [ 5.610000] Amd/Fujitsu Extended Query version 1.3. [ 5.620000] number of CFI chips: 1 [ 5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0 [ 5.640000] Creating 6 MTD partitions on "physmap-flash.0": [ 5.650000] 0x000000000000-0x000000030000 : "u-boot" [ 5.660000] 0x000000030000-0x000000040000 : "u-boot-env" [ 5.680000] 0x000000040000-0x000000050000 : "factory" [ 5.690000] 0x000000050000-0x000000130000 : "kernel" [ 5.700000] 0x000000130000-0x000000800000 : "rootfs" [ 5.710000] mtd: partition "rootfs" set to be root filesystem [ 5.730000] split_squashfs: error occured while reading from "physmap-flash.0" [ 5.740000] 0x000000050000-0x000000800000 : "firmware" [ 5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33 [ 5.780000] TCP: cubic registered [ 5.780000] NET: Registered protocol family 17 [ 5.790000] 8021q: 802.1Q VLAN Support v1.8 [ 5.820000] Freeing unused kernel memory: 2676k freed [ 6.490000] Button Hotplug driver version 0.4.1 - preinit - Press the [f] key and hit [enter] to enter failsafe mode - regular preinit - - init - Please press Enter to activate this console. [ 10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993 [ 10.170000] Backport based on wireless-testing.git master-2012-09-07 [ 10.180000] compat.git: wireless-testing.git [ 10.210000] cfg80211: Calling CRDA to update world regulatory domain [ 10.230000] cfg80211: World regulatory domain updated: [ 10.240000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.270000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.280000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.300000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.430000] NET: Registered protocol family 10 [ 10.760000] PPP generic driver version 2.4.2 [ 10.820000] l2tp_core: L2TP core driver, V2.0 [ 10.840000] l2tp_netlink: L2TP netlink interface [ 10.870000] sit: IPv6 over IPv4 tunneling driver [ 10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.060000] NET: Registered protocol family 24 [ 11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max) [ 11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 14.510000] device eth0.1 entered promiscuous mode [ 14.520000] device eth0 entered promiscuous mode [ 14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready [ 14.550000] br-lan: port 1(eth0.1) entered forwarding state [ 14.560000] br-lan: port 1(eth0.1) entered forwarding state [ 16.560000] br-lan: port 1(eth0.1) entered forwarding state [ 16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33 BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- BARRIER BREAKER (Bleeding Edge, r34079) ----------------------------------------------------- * 1/2 oz Galliano Pour all ingredients into * 4 oz cold Coffee an irish coffee mug filled * 1 1/2 oz Dark Rum with crushed ice. Stir. * 2 tsp. Creme de Cacao ----------------------------------------------------- root@OpenWrt:/# git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34111 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07ramips: add HAVE_CLK to Kconfig on all ramips socsblogic
Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07ramips: add linux-3.6 configuration for ramips socsblogic
Signed-off-by: Daniel Golle <dgolle@allnet.de> create mode 100644 target/linux/ramips/rt288x/config-3.6 create mode 100644 target/linux/ramips/rt305x/config-3.6 create mode 100644 target/linux/ramips/rt3883/config-3.6 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34109 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07ramips: port patches to linux-3.6blogic
Signed-off-by: Daniel Golle <dgolle@allnet.de> create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34108 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07bcm63xx: Enable endian check support for ath9k pci fixup.jogo
Some ath9k caldatas need to be "endian checked". This patch allows selecting wether to enable endian check or not. Endian check is disabled by default. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34105 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07[ixp4xx]: fixup typos in the compex patchkaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34104 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06linux: export bcm963xx_tag.h to userspacejogo
Export bcm963xx_tag.h so mtd can use it without using kernel includes. Signed-off-by: Catalin Patulea <cat@vv.carleton.ca> [jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header from original location, refresh patches, use a more matching patch number, port to 3.6] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34103 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06cns3xxx: refresh kernel config fileluka
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06cns3xxx: use files directoryluka
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06[lantiq] add OWRTDTB marker patchblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06[lantiq] add support for arv7525blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06[cns3xxx]: refresh patcheskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06[cns3xxx]: add default packageskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34094 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06linux: generic: fix split_squashfs for 3.6jogo
_read expects the retlen to be initialized to zero, which the mtd_read helper does. So fix it by using mtd_read instead of calling _read directly. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34093 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05bcm63xx: fix SPW303V imagesjogo
SPW303V also needs its CRC fixed up since increasing the image size to 4MB to prevent the dual image mode of CFE. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05ar71xx: nuke ath79_set_usb_power_gpio helperjuhosg
It is no longer used. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34088 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpiojuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34087 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05kernel: update linux 3.6 to 3.6.6juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34086 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05[ixp4xx]: use the mainline machname for the compex boardskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05ramips: enable USB power on the DIR-645juhosg
Closes #12422. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34082 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05linux/3.3: backport an upstream GPIO patchjuhosg
The backported patch introduces new flags to automatically export GPIOs when using the convenience unctions gpio_request_one() or gpio_request_array(). This will be used by ar71xx/ramips platforms. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34081 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05ramips: add restorefactory to default package set for ALL0239-3G and ALL0256Njuhosg
Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34078 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 21:39:11 +0000