summaryrefslogtreecommitdiff
path: root/target/linux/x86/image/Config.in
AgeCommit message (Collapse)Author
2011-10-22[target] x86: allow VDI & VMDK images for all subtargets (closes: #10255)nico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28518 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-17[x86]blogic
* adds support for Artec Thincan Signed-of-By: Lauri Võsandi <lauri.vosandi@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26919 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-13This patch provides an image suitable for the alix2*, alix3, and alix6 ↵cshore
headless (non-VGA equipped) SBC's. Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker. GPIO 1 : SIM select (Alix6) GPIO 6 : LED1 GPIO 25 : LED2 GPIO 27 : LED3 or RFKILL (Alix6) GPIO 24 : Soft switch 1 No kernel version bump. Added i2c-scx200-acb for lm-sensors support. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-12Enable padding of jffs2 images to user specified filesystem sizejow
Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-22[geos]blogic
* Make sure that Geos baud-rate defaults correctly Changeset 23414 somehow got reordered. The unconditional default trumps later settings. contributed by Philip Prindeville git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25068 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22switch from ext2 to ext4 (w/o) journalingkaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24084 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-12target/linux: fix Geos baudrate. (thank you Philip Prindeville)acoul
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23414 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-10[Patch v2] Geos -- new x86 subtarget definitionjow
This defines the Geos platform from Traverse Technologies in AUS. This is a Geode LX800 with 512MB of DDR400 memory, 2 8139CP interfaces, 2 Solos ADSL2+ interfaces, USB, serial console, CF slot, and miniPCI slot. I'll add support for the LEDs separately. Signed-off-by: Philip A. Prindeville git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23390 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-06[x86] adjust image defaults for KVMjow
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22950 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-09[x86] image: use internal qemu-img for vmdk and vdi imagesagb
drop host dependencies on qemu-utils and VirtualBox git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-05target/x86: cleanup image config optionsnico
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21365 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-05target/x86: use common config items for options shared between generic and ↵nico
olpc targets git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21364 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-11[x86] add net5501 supportflorian
This patch brings up the net5501 platform. Note that the x86/ target included support for all x86/ class processors. That's not technically correct. This should be constrained only to the "generic" subtarget. Every x86-class target that isn't generic should be able to select only the optimizations/capabilities applicable to that architectural variant. It's also assumed that all x86 processors have keyboard & mouse ports, ISA, DMI, ACPI... the embedded ones typically don't. Again, moving that to the generic subtarget. Fortunately, this was a fairly benign tweak. The net5501 board includes the following logic: Geode/LX processor CS5535 super-I/O chip PC87360 sensor chip Via Rhine Ethernet controllers Via Sata controllers USB, LEDS, I2C Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-17[x86]jow
- clean up menu.lst template - make grub usage of vt0 selectable in menuconfig - choose appropriate default baudrate for soekris devices - fix generation of grub menu for iso images git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-12[x86] make console port editable through menuconfig, gzip ext2 images, add ↵jow
suitable defaults for Xen git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19612 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-27remove handling of older unsupported kernelskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18955 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-18fix grub image target dependencykaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-17change x86 image generation handling to treat only olpc speciallykaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18441 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-03[x86] merge the olpc target with the x86 target, both tested and runningflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-25x86: use libata in 2.6.30, fix pata support for sc1200 (used on wrap)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-02Use VBoxManage instead of obsolete vditool to generate VirtualBox images.cyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-09Add support for creating VMware vmdk images #1317florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13158 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-30fix typoflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-30Add virtualbox images to x86 (#3475)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11298 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-09move grub to package/nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-08added generation of x86 livecds, from #2391blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-09fixes menuconfig selection of grub for x86 targetsblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-06strip the kernel version suffix from target directories, except for brcm-2.4 ↵nbd
(the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 18:28:25 +0000