summaryrefslogtreecommitdiff
path: root/target/linux/ramips
AgeCommit message (Collapse)Author
2012-11-07ramips: add linux-3.6 configuration for ramips socsblogic
Signed-off-by: Daniel Golle <dgolle@allnet.de> create mode 100644 target/linux/ramips/rt288x/config-3.6 create mode 100644 target/linux/ramips/rt305x/config-3.6 create mode 100644 target/linux/ramips/rt3883/config-3.6 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34109 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-07ramips: port patches to linux-3.6blogic
Signed-off-by: Daniel Golle <dgolle@allnet.de> create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34108 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05ramips: enable USB power on the DIR-645juhosg
Closes #12422. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34082 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-05ramips: add restorefactory to default package set for ALL0239-3G and ALL0256Njuhosg
Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-29target: refresh all target configs with kconfig.pljuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33987 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-26ramips: use correct key code for the RFKILL switch on the TEW-691GRjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33943 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-19ramips: disable 5GHz on the built in wireless mac of the TEW-69{1,2}GRjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33864 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18ramips: add profile and build image for the TEW-691GR boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33852 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18ramips: add user-space support for TEW-691GRjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18ramips: rt3883: add initial support for the TRENDnet TEW-691GR boardjuhosg
No wireless support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18ramips: add profile and build image for the TEW-692GR boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18ramips: add user-space support for the TEW-692GR boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18ramips: rt3883: add initial support for TRENDnet TEW-692GR boardjuhosg
No wireless support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18ramips: add profile and build image for the DIR-645 boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18ramips: add user space support for the DIR-645juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18ramips: rt3883: add inital support for the DIR-645 boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18ramips: use get_magic_long in sysupgrade image checkjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-04ramips: add image for ALL0256N-8Mjuhosg
The new version of the ALL0256N now got 8MB SPI NOR flash instead of 4MB. In order to expose the whole amount of flash, add another image which contains the corresponding GENERIC_8M mtdparts. [juhosg: change suffix from '8m' to '8M'] Patch by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33614 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27ramips: add memory detection code for RT5350juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-27ramips: allow to use custom code for memory size detectionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33570 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25[ramips] make uci-defaults switch detection work on rt5350blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25[ramips] add ethernet support for rt5350blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25[ramips] make ramips ethernet use a register mapping tableblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25[ramips] unbreak port mapping detectionblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33536 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-15D-Link DAP-1350; Avoid bricking esw configblogic
This is a patch to connect eth0.1 (lan) to the only ethernet connector available. D-Link DAP-1350 goes bricked with AA 12.09-beta. This is because the current esw configuration for the board connects eth0.2 (wan) to the *ONE and ONLY* ethernet connector available, preventing initial access to the board through 192.168.1.1 on eth0.1 after flashing, effectively bricking the board. There are things that should be done to make this board really useful, but for AA 12.09, this one liner is indispensable. Signed of by Yoichi Shinoda <shinoda@jaist.ac.jp> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33411 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-15ramips/rt3883: fix a typo in the ASUS profileblogic
Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-12ramips/rt305x: add initial support for Rt5350 SoCjuhosg
Somehow detecting the RAM size in common/setup.c doesn't work here, it always detects 64M and then crashes on devices with less RAM. Probably using MEMC_REG_SDRAM_CFG1 to know the RAM size is how it could be, for now I use the mem=32M kernel parameter to get stuff working. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33381 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05ramips: Add missing andmask to ramips_esw register read for recv_good value.juhosg
Add missing andmask to ramips_esw register read for recv_good value. Without the mask, recv_bad leaks into the recv_good packet count. Didn't notice the bug before since you don't usually get bad packets, so I only saw it when I was playing with overlength packets earlier... Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33322 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05ramips: Use doubletagging to disable ramips_esw vlan by default, it seems ↵juhosg
more reliable. Use doubletagging to disable ramips_esw vlan by default, it seems more reliable. Daniel Golle found an issue where sometimes (possibly only for RT3352) the default vlan disable method (clearing en_vlan, untag, doubletag and putting all ports into vlan 0) doesn't work and the packets get sent out vlan-tagged with vlan 0. Instead switch to using the doubletagging method (allow doubletagged packets, put all ports into vlan 0 with untag enabled) by default. Unless someone figures out a way to really globally disable vlan for this switch, this seems like the best (most reliable) option. I did some tests regarding maximum packet size and did not see any difference between the two methods, both allow for slightly bigger packets than the ramips_main.c ethernet driver (ping stops going through above "ping -s 1472" (1514 bytes), on the switch packets are recv_good until "ping -s 1490", or about 1532 bytes). Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-05ramips: add rssileds to package set in profile for devices which got them.juhosg
Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33316 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: make built-in switch transparent for ALL0256N and ALL5002juhosg
This allows them to transparently communicate with an external VLAN switch. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Power down phy on disabled switch portsjuhosg
Power down phy on disabled switch ports. Haven't measured this myself yet, but according to this http://www.8devices.com/community/viewtopic.php?f=6&t=156 it can save about 300mW of power. [juhosg: fix checkpatch warning] Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Add support for 8devices Carambola dev board.juhosg
Add support for 8devices Carambola dev board. The Carambola is a small RT3050-based development board with two ethernet ports, on-board chip antenna, usb and plenty of accessible gpio ports, sold by 8devices. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Rename POC registersjuhosg
Rename POC registers. The current code uses POC1-POC3. The datasheet uses: POC1: Port Control 0 POC1: Port Control 1 POC2: Port Control 2 So the first POC1 is a typo that should have been POC0, rename the registers to POC0-POC2 accordingly. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Minor ramips_esw.c cleanupjuhosg
Stop handling VLAN setup in the kernel. Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for WL-351 and add some extra comments. Also removes the en_vlan per-port flag that isn't very useful really, it now is only controlled by the global enable_vlan flag. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Add switch setup to uci network defaultsjuhosg
Add switch setup to uci network defaults. The 'lan' attribute is used to decide into which vlan to put the port. Currently 'disable' is never set, but the intention is to use this for devices like the 8devices Carambola, which only has two ports hooked up to the SoC. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Add swconfig support to ramips_esw.cjuhosg
Add swconfig support to ramips_esw.c This patch adds swconfig support for ramips_esw: Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external rtl8366rb on internal port 5). I've made sure that in the enable_vlan=0 case it behaves like a dumb switch, so external switches should work fine with vlans and verified this on the WL-351. The current state shown by swconfig is always read directly from HW registers, new settings only show after 'swconfig dev rt305x set apply'. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33299 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: ramips_esw.c indentation cleanupjuhosg
Minor indentation cleanup. Prepare for the main swconfig patch by cleaning up indentation a bit. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33298 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22ramips: fix board parameter for the NBG-419N (#12061)juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22ramips: add profile for Allnet devicesjuhosg
Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33225 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22ramips: add RSSI leds for uci-defaults for ALL0256Njuhosg
Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33220 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-17ramips: add board alias for the ALL0239-3Gjuhosg
Generate image for the ALL0239-3G which can be flashed through the chipset-vendor SDK based firmware's web-interface and bootloader. The bootloader seems to ignore uImage checksum errors, but does complain about them once the 0xDEADC0DE was replaced by an actual JFFS2 page. I'm working on implementing fixtrx for uImage in the mtd package to solve this. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33206 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-17ramips: add support for D-Link DIR-615 H1juhosg
rt2x00 still needs some patching as the radio doesn't come to life. Installation via webflash. [juhosg: fix whitespace issues, remove rt305x_register_usb from machine setup because the board has no USB port] Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33205 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-12ramips: rename rt3352 usb platform devicesjuhosg
In order to get OHCI/EHCI working on the Rt3352, the platform device must be named so rt3883-?hci will recognize it. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33145 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-12ramips: watchdog: use maximum possible timeout by defaultjuhosg
As the userspace has no means to determine the maximum possible timeout, use that as the default and let the userspace lower it when necessary. As the result the usual OpenWrt install (with busybox's watchdog trying to set the timeout to 60s on start) is using a 33s timeout on an RT3052 clocked at 384MHz instead of the current 20s default. Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33144 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-12ramips: provide means to specify custom "image name" for uImages, use for ↵juhosg
DIR-620 D-Link's DIR-620 allows to flash a uImage directly from its web-interface but for that the image name should be set to DIR_620. Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-12ramips: add D-Link DIR-620 A1 supportjuhosg
Full functionality runtime tested, installation via OEM web-interface requires a follow-up patch. Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing bits (including the antiparallel wps led). Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25[ramips] move rt305x-dwc driver to target specific modules.mkflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32864 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24[ramips] DWC otg usb: compilation fixes and trivial bugfix in slave modeblogic
Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32823 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-29 10:04:37 +0000