summaryrefslogtreecommitdiff
path: root/target/linux/ramips
AgeCommit message (Collapse)Author
2011-03-27ramips: remove 2.6.36 stuffjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27ramips: switch to 2.6.37juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26328 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27ramips: UPF_FIXED_TYPE must be set for the serial portsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26327 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27ramips: define GPIO chips separately for each SoCsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27ramips: move GPIO definitions into a separate header filejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26325 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27ramips: setup GPIO chip functions on the flyjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27ramips: use separate register base for GPIO chipsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27ramips: fix dir-300 mtd layoutjuhosg
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26322 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27ramips: enable MDIO on the HW550-3G boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27ramips: add sysupgrade and status LED support for HW550-3Gjuhosg
This patch adds sysupgrade and status LED support for the Aztech HW550-3G. Some LED GPIOs were changed for clarity. Signed-off-by: Layne Edwards <ledwards76@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-26global cflags: remove -funit-at-a-time, it is ignored by recent compilers. ↵nbd
instead add -fno-caller-saves, which improves compression ratio for generated code with no apparent negative effects on performance git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13ramips: initial board support for Aztech HW550-3Gjuhosg
This patch adds initial support for the Aztech HW550-3G (Ralink RT3052f SoC, 8MB flash, 32MB dram). Ethernet is not working yet. Wireless appears to work fine. USB does not work yet (as with other Ralink boards). Signed-off-by: Layne Edwards <ledwards76@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-19[kernel] update to kernel 2.6.36.4florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25580 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26ramips: register watchdog device on the rt288x boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26ramips: add watchdog device for RT288xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26ramips: register watchdog device on the rt305x boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26ramips: add watchdog device for RT305xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26ramips: add watchdog driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26ramips: implement clock API for RT288xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26ramips: implement clock API for RT305Xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26ramips: remove extern and __init from function prototypesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-04ramips: ramips_esw: fix typosjuhosg
Patch from #8577. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-14ramips: remove 2.6.3[24] supportjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-14ramips: switch to 2.6.36juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24561 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-14ramips: handle OTG interrupt on the RT305x SoCjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-13base-files: use shutdown instead of stop when the system goes down (patch by ↵nbd
tripolar) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08ramips: ramips_esw: add more definitionsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24340 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08ramips: ramips_esw: add helper function to set pvidjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24339 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08ramips: ramips_esw: add helper function to set vlan membersjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24338 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08ramips: ramips_esw: add helper function to set VLAN idjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24337 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08ramips: ramips_esw: introduce rt305x_esw_rmw{,_raw} functionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24336 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08ramips: ramips_esw: use rt305x_esw prefix in function namesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24335 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08ramips: ramips_esw: coding style cleanupjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24334 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08ramips: ramips_esw: add defines for switch register offsetsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24333 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08ramips: ramips_esw: don't touch GPIO_PURPOSE registerjuhosg
It must have been set by the board initialization code. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24332 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08ramips: ramips_esw: convert it to be a platform driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08ramips: ramips_esw: move hardware initialization into a separate functionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24330 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08ramips: ramips_esw: use a private structure for the functionsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-05ramips: add support for 2.6.36juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24270 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-05ramips: default profile fixjuhosg
Fix package names in default profiles. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24269 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-05ramips: use tabs instead of spaces in mach-f5d8235-v2.cjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24ramips: add support for Belkin F5D8235 v2 boardjuhosg
No support for usb for now. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24ramips: Use NET_IP_ALIGN instead of hardcoding 2juhosg
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24ramips: DMA map the correct RX skb sizejuhosg
The skb_reserve call prior to DMA mapping the RX skb reduced the skb data len by 2. To not allow DMA to write behind the skb we should pass the correct skb data len to the device. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24ramips: Don't trigger BUG_ON due to skb allocation failurejuhosg
Instead just drop the rx'ed frame silently and reuse the already available buffer. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24122 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24ramips: Remove unnecessary skb_putjuhosg
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24121 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-05ramips: Allow ethernet interface to be taken down and up againjuhosg
Taking the ramips ethernet interface down and up again resulted in the driver not receiving any frames anymore. Fix this by correctly disabling interrupts in the hw on ifdown. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-04[kernel]: upgrade kernel versions to the latest stable oneskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23219 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)juhosg
The attached patch adds a preliminary support for Prolink PWH2004 board (Ralink RT305x based). LAN and flash appear to work. However, the USB port and WLAN I have not managed to activate properly yet, but that problem appears to be present with other rt305x targets as well(?). Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27ramips: allow USBjuhosg
The current defaults for ramips rt305x does not allow the USB subsystem to be selected/built. This patch is just a small step in that direction. Signed-off-by: Luis Correia <luis.f.correia@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23128 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-29 11:31:08 +0000