summaryrefslogtreecommitdiff
path: root/target/linux/ramips
AgeCommit message (Collapse)Author
2013-05-30ramips: set correct description for rt305x subtargetblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36775 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-26kernel: update linux 3.8 to 3.8.13juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36724 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-12kernel: move CONFIG_MIPS_SEAD3 to genericjogo
Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-08kernel: update linux 3.8 to 3.8.12juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-07ramips: drop 3.7 supportblogic
Signed-off-by; John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36572 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-07ramips: properly setup the FEATURES variableblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: fix memory detection rt5350blogic
Signed-off-by: Felix Kaechele <felix@fetzig.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: enable dsp extensions for rt305x and rt3883blogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: fix fypo in ethernet driver rt288x, rt3883blogic
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36565 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: Update ARC Freestation profileblogic
These devices are actually built around the 8devices Carambola dev board. ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are supported with this image, see "ARCFlex Firmware Downloads": http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History Funnily enough if present the external USB wlan ends up being wlan-0, with the SoC device being wlan-1. - Invert port map so special handling of vlan config can be removed. - Add LED config similar to original ArcOS firmware. - Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1 - Get MACs from factory partition. - Update description to list supported devices. - Carambola uses RT3050 (not RT3052), though my Carambola CPU actually reports itself as being an RT3350 while still having RT3050F markings. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: Support setting active_low in devicetree gpio-exportblogic
Support setting active_low in devicetree gpio-export. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36563 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ralink: unbreak uart pinmux handlingblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: fix gpio base numberingblogic
make banks 0 based to unbreak userland ABI Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36561 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: add gpio base properties to dtsi filesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: unbreak rt2880 supportblogic
Signed-off-by: John Crsipin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36559 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06ramips: fix DIR-602D1 flash sizeblogic
Fix DIR-620D1 flash size. Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36558 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-04ramips: unbreak gpio handling for uart mux groupblogic
this should fix the handling of corner cases Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36543 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-01kernel: update linux 3.8 to 3.8.11juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36507 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30kernel: update linux 3.8 to 3.8.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36493 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30ramips: move dlink profile to correct sub folder - 2nd tryblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36489 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30ramips: move dlink profile to correct sub folderblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26kernel: update linux 3.8 to 3.8.9juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-26ramips: rt3883: fix build errorjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25ramips: remove now unneeded user-space board detectionblogic
Now that ALL5002 and ALL5003 each got their own DTS and board names, remove the now no longer needed user-space part which previously differentiated between ALL5002 and ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3558/ Acked-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36436 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25ramips: introduce DTS for ALL5003blogic
Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c. With the change to DTS, this is no longer accurate, as ALL5002 is based on Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding rt5350.dtsi need to be included for ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3557/ Acked-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36435 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25ramips: set preinit interface to eth0 by default.blogic
This makes any ramips device accessible via ethernet in failsafe mode. Based on: https://dev.openwrt.org/changeset/36322 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3567/ Acked-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25ramips: Add Alpha ASL-26555 support.blogic
This board uses a TrendChip SOC with its own RAM/Flash for ADSL support. We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN. There are two versions (Chile 8MB and Spain 16MB). Wiki: http://wiki.openwrt.org/toh/alpha/asl26555 Signed-off-by: Esteban Benito <estebanjbs@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3571/ Acked-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25ramips: Add support of D-link DIR-620D1blogic
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> Acked-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36432 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25ramips: sync kernel patches with the mips-next treeblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36431 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-19kernel: update linux 3.8 to 3.8.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36363 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-17[ramips] fix prepare_generic_squashfsblogic
prepare_generic_squashfs was called twice on the generated images breaking mount_root Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36349 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-16[ramips] fix rt305x gpioblogic
https://dev.openwrt.org/ticket/13359 Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36343 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-14kernel: update linux 3.8 to 3.8.7juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36332 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12[ramips] update rt2880 config-3.8blogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36327 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12[ramips] fix up the rt2880 patchesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12[ramips] fix RT-N15 supportblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36325 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-12[ramips] update rt2880.dtsiblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09[ramips] unbreak portmapping - typo fixblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36293 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09[ramips] move memory detect node to dtsi filesblogic
Signed-of-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36290 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09[ramips] Add Netgear WNCE2001 (OF version)blogic
Add Netgear WNCE2001. This is a small RT3052 device with 4MB spi flash and 32MB ram. 2 built-in antennas, 1x fastE, no USB, reset & wps switch. On my model the AP/RT switch is unpopulated, but I verified the gpio mapping for it. The stock firmware is running an unprotected tftpd which allows you to read any file from the filesystem. Serial port is present on testpads (See image on the wiki page). There are more testpads below the shield near the SoC, which may have JTAG. Slight annoyance: The bootloader is checksumming kernel&rootfs, but can be tricked by zeroing checksum and length fields in the checksum partition, see target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming The manufacturer image is very similar to the DAP one, so I slightly modified mkdapimg to support generating it. The resulting openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin can be used to flash from stock to OpenWRT using the stock firmware upgrade function, without using the serial port. http://www.netgear.com/landing/wnce2001.aspx http://wiki.openwrt.org/toh/netgear/wnce2001 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09[ramips] remove bootargs from dtsblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09[ramips] add ofpart info to the devicetreesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36287 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09[ramips] add sample swconfig portmapblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36286 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09[ramips] set of_node before registring the switchblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36285 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08ramips: TEW-691GR.dts fixesjuhosg
* fix pinmux settings * remove spi node * add nor-flash node * enable mdio-bus and add phy handle Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08ramips: rt3883: enable the AR8216 driverjuhosg
It is needed for the TEW-69{1,2}GR boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08ramips: add profile for the Omnima EMB-HPM boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08ramips: OMNI-EMB-HPM.dts fixesjuhosg
* add mdio-bus and phy nodes * set phy-handle for the ethernet node * define flash partiions * cleanup flash node properties Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36273 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08ramips: add mdio-bus node to rt3883.dtsijuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36272 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-08ramips: fix MDIO/PHY handlingjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36271 3c298f89-4303-0410-b956-a3cf2f4a3e73