summaryrefslogtreecommitdiff
path: root/target/linux/ramips
AgeCommit message (Collapse)Author
2012-05-27ramips: rt3883: add device registration code for the SPI controllerjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27ramips: allow to use the SPI driver on RT3662/RT3883juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27ramips: rt3883: fix GPIO reservation for the SPI pinsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27ramips: rt305x: remove superfluous controller_data assignmentjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31919 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27ramips: make rt2x00 firmware extraction quietjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31918 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23kernel: update linux 3.3 to 3.3.7juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23ramips: Add byte queue limits support to net/ethernet/ramips_main.cjuhosg
Add byte queue limits support to net/ethernet/ramips_main.c "Byte queue limits are a mechanism to limit the size of the transmit hardware queue on a NIC by number of bytes. The goal of these byte limits is too reduce latency (HOL blocking) caused by excessive queuing in hardware (aka buffer bloat) without sacrificing throughput." Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23ramips: Enable sysupgrade for Sitecom WL-351juhosg
Sysupgrade works just fine on my Sitecom WL-351 after adding this oneliner. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15linux: move certain disabled symbols to the generic configsjuhosg
* CONFIG_ARCH_DMA_ADDR_T_64BIT * CONFIG_ARCH_HAS_ILOG2_U32 * CONFIG_ARCH_HAS_ILOG2_U64 * CONFIG_ARCH_PHYS_ADDR_T_64BIT * CONFIG_ARCH_SUPPORTS_MSI * CONFIG_GENERIC_CPU_DEVICES * CONFIG_HWMON_DEBUG_CHIP * CONFIG_I2C_PXA_PCI * CONFIG_LEDS_GPIO * CONFIG_MINIX_FS_NATIVE_ENDIAN * CONFIG_MLX4_CORE * CONFIG_POWER_SUPPLY * CONFIG_POWER_SUPPLY_DEBUG * CONFIG_QUOTACTL * CONFIG_SDIO_UART * CONFIG_SENSORS_K10TEMP * CONFIG_SENSORS_SCH56XX_COMMON * CONFIG_SENSORS_VIA_CPUTEMP * CONFIG_SERIO_AMBAKMI * CONFIG_SERIO_I8042 * CONFIG_SERIO_LIBPS2 * CONFIG_SERIO_PCIPS2 * CONFIG_SERIO_RAW * CONFIG_SERIO_SERPORT * CONFIG_SPI_BITBANG * CONFIG_SPI_GPIO git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14kernel: update linux 3.3 to 3.3.6juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07kernel: update linux 3.3 to 3.3.5juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02ramips: W306R V2.0 - GPIO and Network fixesjuhosg
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by removing a line(default is correct), and reversed the Lan/wan layout LLLLW to WLLLL. Added: image/Makefile now builds -factory.bin files. I am unsure of the accepted way to change the makefile but the name of the image needs to be 'linkn Kernel Image' in order to be accepted by the OEM firmware. Known issue: eth0 (internal switch i think has mac address: 00:11:22:33:44:55 but i think it should be same as the lan). Known issue: Pressing the reset button has no noticable effect, i would expect the router to boot failsafe if being pressed on boot, reboot if short press and reset all to default if long press. [juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead] Signed-off-by: David Pearce <david_18051985@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02ramips: Make serial console for DIR-300-B1 work againjuhosg
Make serial console for DIR-300-B1 work again. With some recent change, "console=ttyS1,57600" was removed from the default kernel command line, this adds the necessary mkcmdline incantation to image/Makefile to add it there for this target. This is quite likely broken for other targets as well. Without this the console switches to ttyS0 instead of ttyS1 and kernel output is missing, and the userspace comes up with 9600 baud instead of 57600. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-30kernel: update linux 3.3 to 3.3.4juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UNjuhosg
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31507 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24kernel: update linux 3.3 to 3.3.3jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23ramips: rt305x: add support for the UR-336UN boardjuhosg
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23ramips: rt305x: add support for the Asus WL-330N3G boardjuhosg
This patch adds support for the ASUS WL-330N3G Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led. The bi-color led is driven by 2 gpio. I don't know how to handle this, so I simply made 2 leds : one red, one blue. But the red light takes precedence over the blue one according to the chart below. r = led is red b = led is blue 0 = led is off xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness initial state action led gpio state r0 b0 r0->r1 r r0 b0 r0 b0 b0->b1 b r0 b1 r1 b0 r1->r0 0 r0 b0 r1 b0 b0->b1 r r1 *b1* r1 b1 r1->r0 b r0 b1 r1 b1 b1->b0 r r1 b0 r0 b1 r0->r1 r r1 *b1* r0 b1 b1->b0 0 r0 r0 Signed-off-by: Frédéric Leroy <fredo@starox.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21ramips: nuke 3.2 suportjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31405 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21ramips: switch to 3.3.2juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31404 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21ramips: add support for 3.3juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31403 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21ramips: rt305x: add OHCI/EHCI registration code for RT3352juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31402 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21ramips: rt305x: fix CPU clock detection on RT3352juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31401 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21ramips: rt305x: use different memory size setup for RT3352juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31400 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21ramips: rt3883: add profile and build sysupgrade image for the RT-N56Ujuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31399 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21ramips: add swconfig to the default package listjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31398 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21ramips: build initramfs image for the Fonera 2.0Njuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31397 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21ramips: rt305x: add initial support for Tenda W306R V2.0juhosg
More device info at: http://wiki.openwrt.org/toh/tenda/w306r Signed-off-by: David Pearce <David_18051985@hotmail.com.au> [juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages from the profile, change broken GPIO number] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21ramips: remove hardcoded console parameter from kernel configsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-17kernel: also update the targets to use 3.2.15jogo
Thanks Gabor for spotting it. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31337 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-09kernel: update linux 3.2 to 3.2.14jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31222 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-01kernel: update linux 3.2 to 3.2.13 and refresh patchesjogo
Also remove a duplicate patch from lantiq (already in generic). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31158 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-29ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN ↵jow
network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31144 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27ramips: rt305x: build image for the DIR-615 rev D boardsjuhosg
Patch from #10105. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27ramips: rt305x: add add support for the Asus WL-330N boardjuhosg
[juhosg: reorder several lines in order to keep things sorted alphabetically] Signed-off-by: Frédéric Leroy <fredo@starox.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19kernel: update linux 3.2 to 3.2.12juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31028 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12ramips: rt305x: add profile for the AZtech HW-5503G boardjuhosg
Patch from #11085. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30907 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12ramips: add RT3350 detectionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11ramips: rt305x: rewrite SoC detectionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11ramips: rt305x: rename SYSTEM_CONFIG_* defines to RT305X_SYSCFG_*juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11ramips: replace RALINK_SOC_* macros with global variablesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11ramips: introduce ramips_soc_prom_init and move SoC detection into thatjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11ramips: build initramfs image for DIR-{3,6}00 boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11ramips: allow to use DSP ASE on RT3xxxjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-04ramips: add support for unbranded XDX-RN502J boardjuhosg
This patch adds support for routers using a PCB marked XDX-RN502J V2.0, such as some unbranded routers like this: http://www.mediafire.com/?8acv87h6snn9fj6 http://www.mediafire.com/?do7xonw7scor4kn http://www.mediafire.com/?1ad49zvx3e7jyix http://www.mediafire.com/?i46cqiq66maa197 http://www.aliexpress.com/product-fm/516397994-Free-Shipping-300M-3G-WAN-Wireless-N-WiFi-USB-AP-Router-2-Antennas-wholesalers.html some reports also state the Aceex 22Y uses the same board. more information can be found in the following openwrt forum post https://forum.openwrt.org/viewtopic.php?id=34878 [juhosg: fix checkpatch warnings, use the GENERIC_4M template] Signed-off-by: bruno schwander <bruno@tinkerbox.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-04ramips: board support for Asus RT-N10+juhosg
[juhosg: fix indentation in platform scripts, and remove debug messages from 06_set_iface_mac] Signed-off-by: Patrick van Staveren <trick@vanstaveren.us> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-01kernel: update linux 3.2 to 3.2.9juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30767 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-26ramips: don't read RAMIPS_RX_CALC_IDX0 register in the loopjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-26ramips: raeth: add rx_info structurejuhosg
This helps to reduce code size on RX path: add/remove: 0/0 grow/shrink: 3/1 up/down: 68/-56 (12) function old new delta ramips_eth_open 1104 1144 +40 ramips_ring_free 212 232 +20 ramips_eth_stop 400 408 +8 ramips_eth_rx_hw 648 592 -56 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30732 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-26ramips: raeth: add tx_info structurejuhosg
This helps to reduce code size on TX path: add/remove: 0/0 grow/shrink: 1/4 up/down: 56/-92 (-36) function old new delta ramips_eth_open 1048 1104 +56 ramips_eth_tx_housekeeping 156 148 -8 ramips_ring_free 224 212 -12 ramips_eth_stop 420 400 -20 ramips_eth_hard_start_xmit 480 428 -52 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30731 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-30 19:36:11 +0000