summaryrefslogtreecommitdiff
path: root/target/linux/ramips
AgeCommit message (Collapse)Author
2012-08-29ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: make built-in switch transparent for ALL0256N and ALL5002juhosg
This allows them to transparently communicate with an external VLAN switch. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Power down phy on disabled switch portsjuhosg
Power down phy on disabled switch ports. Haven't measured this myself yet, but according to this http://www.8devices.com/community/viewtopic.php?f=6&t=156 it can save about 300mW of power. [juhosg: fix checkpatch warning] Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33304 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Add support for 8devices Carambola dev board.juhosg
Add support for 8devices Carambola dev board. The Carambola is a small RT3050-based development board with two ethernet ports, on-board chip antenna, usb and plenty of accessible gpio ports, sold by 8devices. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Rename POC registersjuhosg
Rename POC registers. The current code uses POC1-POC3. The datasheet uses: POC1: Port Control 0 POC1: Port Control 1 POC2: Port Control 2 So the first POC1 is a typo that should have been POC0, rename the registers to POC0-POC2 accordingly. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Minor ramips_esw.c cleanupjuhosg
Stop handling VLAN setup in the kernel. Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for WL-351 and add some extra comments. Also removes the en_vlan per-port flag that isn't very useful really, it now is only controlled by the global enable_vlan flag. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Add switch setup to uci network defaultsjuhosg
Add switch setup to uci network defaults. The 'lan' attribute is used to decide into which vlan to put the port. Currently 'disable' is never set, but the intention is to use this for devices like the 8devices Carambola, which only has two ports hooked up to the SoC. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Add swconfig support to ramips_esw.cjuhosg
Add swconfig support to ramips_esw.c This patch adds swconfig support for ramips_esw: Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external rtl8366rb on internal port 5). I've made sure that in the enable_vlan=0 case it behaves like a dumb switch, so external switches should work fine with vlans and verified this on the WL-351. The current state shown by swconfig is always read directly from HW registers, new settings only show after 'swconfig dev rt305x set apply'. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33299 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: ramips_esw.c indentation cleanupjuhosg
Minor indentation cleanup. Prepare for the main swconfig patch by cleaning up indentation a bit. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33298 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22ramips: fix board parameter for the NBG-419N (#12061)juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22ramips: add profile for Allnet devicesjuhosg
Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33225 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22ramips: add RSSI leds for uci-defaults for ALL0256Njuhosg
Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33220 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-17ramips: add board alias for the ALL0239-3Gjuhosg
Generate image for the ALL0239-3G which can be flashed through the chipset-vendor SDK based firmware's web-interface and bootloader. The bootloader seems to ignore uImage checksum errors, but does complain about them once the 0xDEADC0DE was replaced by an actual JFFS2 page. I'm working on implementing fixtrx for uImage in the mtd package to solve this. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33206 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-17ramips: add support for D-Link DIR-615 H1juhosg
rt2x00 still needs some patching as the radio doesn't come to life. Installation via webflash. [juhosg: fix whitespace issues, remove rt305x_register_usb from machine setup because the board has no USB port] Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33205 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-12ramips: rename rt3352 usb platform devicesjuhosg
In order to get OHCI/EHCI working on the Rt3352, the platform device must be named so rt3883-?hci will recognize it. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33145 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-12ramips: watchdog: use maximum possible timeout by defaultjuhosg
As the userspace has no means to determine the maximum possible timeout, use that as the default and let the userspace lower it when necessary. As the result the usual OpenWrt install (with busybox's watchdog trying to set the timeout to 60s on start) is using a 33s timeout on an RT3052 clocked at 384MHz instead of the current 20s default. Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33144 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-12ramips: provide means to specify custom "image name" for uImages, use for ↵juhosg
DIR-620 D-Link's DIR-620 allows to flash a uImage directly from its web-interface but for that the image name should be set to DIR_620. Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-12ramips: add D-Link DIR-620 A1 supportjuhosg
Full functionality runtime tested, installation via OEM web-interface requires a follow-up patch. Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing bits (including the antiparallel wps led). Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-25[ramips] move rt305x-dwc driver to target specific modules.mkflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32864 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24[ramips] DWC otg usb: compilation fixes and trivial bugfix in slave modeblogic
Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32823 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24[ramips] D-Link DAP-1350 initial supportblogic
The initial support for the D-Link DAP-1350. USB related functionality is not tested. Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24[ramips] initial LED configuration for Fonera 2.0nblogic
Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips) Signed-off-by: Malte Forkel <malte.forkel@berlin.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24[ramips] add ALL5002 userspace supportblogic
detect EEPROM, MAC addresses and support sysupgrade for the ALL5002 Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32816 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24[ramips] enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F.blogic
Hope that this works, didn't have a chance to actually test it... Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32815 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24[ramips] add image build for ALL5002blogic
add image build for ALL5002 Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32814 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24[ramips] add support for Allnet ALL5002 to kernelblogic
support ALL5002 in ramips/rt305x branch of the kernel. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24[ramips] uart_clk on Rt3352F is always 40MHzblogic
Currently, sys_clk/10 is used which is just wrong. cpu_clk/10 would work for systems with 400MHz CPU clock. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32812 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-12ramips: rt305x: add support for Edimax 3G-6200Njuhosg
Support for Edimax 3G-6200N router with USB. Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-23ramips: mac address detection for Fonera 2.0nacinonyx
Detect and apply MAC address of a Fonera 2.0n (ramips) Signed-off-by: Malte Forkel <malte.forkel@berlin.de> Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA Routerjuhosg
This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router. The platform is based on Ralink RT3052. http://wiki.openwrt.org/toh/petatel/psr-680w Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05[kernel] bump to 3.3.8blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32055 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29ramips: use the generic uci-default functions for initial LED setupjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29ramips: WAN LED for D-Link DIR-300-B1juhosg
Add led devices for D-Link DIR-300-B1 WAN LED. Note that the GPIO state is also ANDed with the esw switch port 4 LED state, which is why I've set the amber LED to default-on. Closes: https://dev.openwrt.org/ticket/11326 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> [ juhosg: - fix comment style in mach-dir-300-revb.c, - remove the PPP specific LED setup, not everyone uses a PPP connection on the WAN interface] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27ramips: rt3883: add device registration code for the SPI controllerjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27ramips: allow to use the SPI driver on RT3662/RT3883juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27ramips: rt3883: fix GPIO reservation for the SPI pinsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27ramips: rt305x: remove superfluous controller_data assignmentjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31919 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27ramips: make rt2x00 firmware extraction quietjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31918 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23kernel: update linux 3.3 to 3.3.7juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23ramips: Add byte queue limits support to net/ethernet/ramips_main.cjuhosg
Add byte queue limits support to net/ethernet/ramips_main.c "Byte queue limits are a mechanism to limit the size of the transmit hardware queue on a NIC by number of bytes. The goal of these byte limits is too reduce latency (HOL blocking) caused by excessive queuing in hardware (aka buffer bloat) without sacrificing throughput." Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23ramips: Enable sysupgrade for Sitecom WL-351juhosg
Sysupgrade works just fine on my Sitecom WL-351 after adding this oneliner. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15linux: move certain disabled symbols to the generic configsjuhosg
* CONFIG_ARCH_DMA_ADDR_T_64BIT * CONFIG_ARCH_HAS_ILOG2_U32 * CONFIG_ARCH_HAS_ILOG2_U64 * CONFIG_ARCH_PHYS_ADDR_T_64BIT * CONFIG_ARCH_SUPPORTS_MSI * CONFIG_GENERIC_CPU_DEVICES * CONFIG_HWMON_DEBUG_CHIP * CONFIG_I2C_PXA_PCI * CONFIG_LEDS_GPIO * CONFIG_MINIX_FS_NATIVE_ENDIAN * CONFIG_MLX4_CORE * CONFIG_POWER_SUPPLY * CONFIG_POWER_SUPPLY_DEBUG * CONFIG_QUOTACTL * CONFIG_SDIO_UART * CONFIG_SENSORS_K10TEMP * CONFIG_SENSORS_SCH56XX_COMMON * CONFIG_SENSORS_VIA_CPUTEMP * CONFIG_SERIO_AMBAKMI * CONFIG_SERIO_I8042 * CONFIG_SERIO_LIBPS2 * CONFIG_SERIO_PCIPS2 * CONFIG_SERIO_RAW * CONFIG_SERIO_SERPORT * CONFIG_SPI_BITBANG * CONFIG_SPI_GPIO git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14kernel: update linux 3.3 to 3.3.6juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-07kernel: update linux 3.3 to 3.3.5juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02ramips: W306R V2.0 - GPIO and Network fixesjuhosg
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by removing a line(default is correct), and reversed the Lan/wan layout LLLLW to WLLLL. Added: image/Makefile now builds -factory.bin files. I am unsure of the accepted way to change the makefile but the name of the image needs to be 'linkn Kernel Image' in order to be accepted by the OEM firmware. Known issue: eth0 (internal switch i think has mac address: 00:11:22:33:44:55 but i think it should be same as the lan). Known issue: Pressing the reset button has no noticable effect, i would expect the router to boot failsafe if being pressed on boot, reboot if short press and reset all to default if long press. [juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead] Signed-off-by: David Pearce <david_18051985@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02ramips: Make serial console for DIR-300-B1 work againjuhosg
Make serial console for DIR-300-B1 work again. With some recent change, "console=ttyS1,57600" was removed from the default kernel command line, this adds the necessary mkcmdline incantation to image/Makefile to add it there for this target. This is quite likely broken for other targets as well. Without this the console switches to ttyS0 instead of ttyS1 and kernel output is missing, and the userspace comes up with 9600 baud instead of 57600. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-30kernel: update linux 3.3 to 3.3.4juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-29ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UNjuhosg
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31507 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24kernel: update linux 3.3 to 3.3.3jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23ramips: rt305x: add support for the UR-336UN boardjuhosg
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31451 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-29 14:01:42 +0000