summaryrefslogtreecommitdiff
path: root/target/linux/ramips/files
AgeCommit message (Collapse)Author
2012-07-24[ramips] D-Link DAP-1350 initial supportblogic
The initial support for the D-Link DAP-1350. USB related functionality is not tested. Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24[ramips] enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F.blogic
Hope that this works, didn't have a chance to actually test it... Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32815 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24[ramips] add support for Allnet ALL5002 to kernelblogic
support ALL5002 in ramips/rt305x branch of the kernel. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24[ramips] uart_clk on Rt3352F is always 40MHzblogic
Currently, sys_clk/10 is used which is just wrong. cpu_clk/10 would work for systems with 400MHz CPU clock. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32812 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-12ramips: rt305x: add support for Edimax 3G-6200Njuhosg
Support for Edimax 3G-6200N router with USB. Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA Routerjuhosg
This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router. The platform is based on Ralink RT3052. http://wiki.openwrt.org/toh/petatel/psr-680w Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29ramips: WAN LED for D-Link DIR-300-B1juhosg
Add led devices for D-Link DIR-300-B1 WAN LED. Note that the GPIO state is also ANDed with the esw switch port 4 LED state, which is why I've set the amber LED to default-on. Closes: https://dev.openwrt.org/ticket/11326 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> [ juhosg: - fix comment style in mach-dir-300-revb.c, - remove the PPP specific LED setup, not everyone uses a PPP connection on the WAN interface] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27ramips: rt3883: add device registration code for the SPI controllerjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27ramips: rt3883: fix GPIO reservation for the SPI pinsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27ramips: rt305x: remove superfluous controller_data assignmentjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31919 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23ramips: Add byte queue limits support to net/ethernet/ramips_main.cjuhosg
Add byte queue limits support to net/ethernet/ramips_main.c "Byte queue limits are a mechanism to limit the size of the transmit hardware queue on a NIC by number of bytes. The goal of these byte limits is too reduce latency (HOL blocking) caused by excessive queuing in hardware (aka buffer bloat) without sacrificing throughput." Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02ramips: W306R V2.0 - GPIO and Network fixesjuhosg
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by removing a line(default is correct), and reversed the Lan/wan layout LLLLW to WLLLL. Added: image/Makefile now builds -factory.bin files. I am unsure of the accepted way to change the makefile but the name of the image needs to be 'linkn Kernel Image' in order to be accepted by the OEM firmware. Known issue: eth0 (internal switch i think has mac address: 00:11:22:33:44:55 but i think it should be same as the lan). Known issue: Pressing the reset button has no noticable effect, i would expect the router to boot failsafe if being pressed on boot, reboot if short press and reset all to default if long press. [juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead] Signed-off-by: David Pearce <david_18051985@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23ramips: rt305x: add support for the UR-336UN boardjuhosg
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-23ramips: rt305x: add support for the Asus WL-330N3G boardjuhosg
This patch adds support for the ASUS WL-330N3G Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led. The bi-color led is driven by 2 gpio. I don't know how to handle this, so I simply made 2 leds : one red, one blue. But the red light takes precedence over the blue one according to the chart below. r = led is red b = led is blue 0 = led is off xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness initial state action led gpio state r0 b0 r0->r1 r r0 b0 r0 b0 b0->b1 b r0 b1 r1 b0 r1->r0 0 r0 b0 r1 b0 b0->b1 r r1 *b1* r1 b1 r1->r0 b r0 b1 r1 b1 b1->b0 r r1 b0 r0 b1 r0->r1 r r1 *b1* r0 b1 b1->b0 0 r0 r0 Signed-off-by: Frédéric Leroy <fredo@starox.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21ramips: rt305x: add OHCI/EHCI registration code for RT3352juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31402 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21ramips: rt305x: fix CPU clock detection on RT3352juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31401 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21ramips: rt305x: use different memory size setup for RT3352juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31400 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-21ramips: rt305x: add initial support for Tenda W306R V2.0juhosg
More device info at: http://wiki.openwrt.org/toh/tenda/w306r Signed-off-by: David Pearce <David_18051985@hotmail.com.au> [juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages from the profile, change broken GPIO number] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-29ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN ↵jow
network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31144 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27ramips: rt305x: build image for the DIR-615 rev D boardsjuhosg
Patch from #10105. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27ramips: rt305x: add add support for the Asus WL-330N boardjuhosg
[juhosg: reorder several lines in order to keep things sorted alphabetically] Signed-off-by: Frédéric Leroy <fredo@starox.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-12ramips: add RT3350 detectionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11ramips: rt305x: rewrite SoC detectionjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11ramips: rt305x: rename SYSTEM_CONFIG_* defines to RT305X_SYSCFG_*juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11ramips: replace RALINK_SOC_* macros with global variablesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11ramips: introduce ramips_soc_prom_init and move SoC detection into thatjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-11ramips: allow to use DSP ASE on RT3xxxjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-04ramips: add support for unbranded XDX-RN502J boardjuhosg
This patch adds support for routers using a PCB marked XDX-RN502J V2.0, such as some unbranded routers like this: http://www.mediafire.com/?8acv87h6snn9fj6 http://www.mediafire.com/?do7xonw7scor4kn http://www.mediafire.com/?1ad49zvx3e7jyix http://www.mediafire.com/?i46cqiq66maa197 http://www.aliexpress.com/product-fm/516397994-Free-Shipping-300M-3G-WAN-Wireless-N-WiFi-USB-AP-Router-2-Antennas-wholesalers.html some reports also state the Aceex 22Y uses the same board. more information can be found in the following openwrt forum post https://forum.openwrt.org/viewtopic.php?id=34878 [juhosg: fix checkpatch warnings, use the GENERIC_4M template] Signed-off-by: bruno schwander <bruno@tinkerbox.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-04ramips: board support for Asus RT-N10+juhosg
[juhosg: fix indentation in platform scripts, and remove debug messages from 06_set_iface_mac] Signed-off-by: Patrick van Staveren <trick@vanstaveren.us> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-26ramips: don't read RAMIPS_RX_CALC_IDX0 register in the loopjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-26ramips: raeth: add rx_info structurejuhosg
This helps to reduce code size on RX path: add/remove: 0/0 grow/shrink: 3/1 up/down: 68/-56 (12) function old new delta ramips_eth_open 1104 1144 +40 ramips_ring_free 212 232 +20 ramips_eth_stop 400 408 +8 ramips_eth_rx_hw 648 592 -56 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30732 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-26ramips: raeth: add tx_info structurejuhosg
This helps to reduce code size on TX path: add/remove: 0/0 grow/shrink: 1/4 up/down: 56/-92 (-36) function old new delta ramips_eth_open 1048 1104 +56 ramips_eth_tx_housekeeping 156 148 -8 ramips_ring_free 224 212 -12 ramips_eth_stop 420 400 -20 ramips_eth_hard_start_xmit 480 428 -52 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30731 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-25ramips: raeth: don't process disabled interruptsjuhosg
Also rename the 'fe_int' variable. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-22ramips: raeth: show interrupt statistics in debugfsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-22ramips: raeth: add debugfs supportjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30680 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-22ramips: raeth: rename main source filejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30679 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-21ramips: raeth: add missing Kconfig and Makefilejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30671 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-21ramips: move the ethernet driver into a separate directoryjuhosg
Also clean up the Kconfig symbols. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30670 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-21ramips: rename the spi driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19ramips: rt3883: make rt3883_nand_data visiblejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30655 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19ramips: merge 3.2 fixesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19ramips: rt305x: nuke built-in MTD partition mapsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30650 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19ramips: rt288x: nuke built-in MTD partition mapsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30649 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G routerjuhosg
[juhosg: - don't switch back to 2.6.39 - update config-3.2 - change machine id to SL-R7205 - reorder case entries in platform scripts - remove button hotplug script] Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30645 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-18ralink: rt3883: disable the 2GHz band on the RT-N56Ujuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30632 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-18ramips: rt3883: make rt3883_wlan_data visiblejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30631 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16ramips: rt3883: change eeprom file namejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30603 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16ramips: select HW_HAS_PCI on per-board basisjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16ramips: rt3883: remove a stray character from rt3883.hjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-16ramips: rt288x: don't register the PCI controller on each boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30574 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 08:44:47 +0000