summaryrefslogtreecommitdiff
path: root/target/linux/ramips/files/arch
AgeCommit message (Collapse)Author
2011-01-26ramips: add watchdog device for RT305xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26ramips: implement clock API for RT288xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26ramips: implement clock API for RT305Xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26ramips: remove extern and __init from function prototypesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-14ramips: handle OTG interrupt on the RT305x SoCjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08ramips: ramips_esw: convert it to be a platform driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-05ramips: use tabs instead of spaces in mach-f5d8235-v2.cjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24ramips: add support for Belkin F5D8235 v2 boardjuhosg
No support for usb for now. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)juhosg
The attached patch adds a preliminary support for Prolink PWH2004 board (Ralink RT305x based). LAN and flash appear to work. However, the USB port and WLAN I have not managed to activate properly yet, but that problem appears to be present with other rt305x targets as well(?). Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-15ramips: add support for Sparklan WCR-150GN boardjuhosg
This patch adds support for Sparklan WCR-150GN board. Network configuration should be tweaked to make it work fully. The reason it's not in this patch is that ramips target should be modified to support different /etc/config/network files for different boards. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15ramips: register ethernet device on the RT-N15juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15ramips: add generic ethernet device for the RT288xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15ramips: add mdio_cfg configuration for the ethernet driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22211 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-13ramips: protect GPIO register access with a spinlockjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-31Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set.blogic
Signed-off-by: Helmut Schaa git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-28ramips: merge slab patchjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21607 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-28ramips: use COMMAND_LINE_SIZE directlyjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21606 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttonsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-31ramips: annotate device register function prototypes with __initjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-31ramips: register wifi device for the RT2880 based boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-31ramips: add wifi device for the RT2880 as welljuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30ramips: register wifi device on the rt305x based boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30The ralink rt305x board has a wireless card that can be used with the ↵blogic
rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30[ramips] Fix the base address of the wireless card. Otherwise it is not ↵blogic
possible to register a platform wireless device as it overlaps with something else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20596 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31ramips_eth: pass sys_clk via platform_datajuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30ramips: register gpio buttons on the Fonera 2.0N boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19413 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30ramips: register gpio buttons on the WHR-G300N boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19412 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30ramips: register gpio buttons on the V22RW-2x2 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19411 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30ramips: register gpio buttons on the DIR-300 revB boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30ramips: fix wrong base addresses for the RT288xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19409 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30ramips: include 'linux/leds.h' from 'dev-gpio-leds.h'juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19408 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30ramips: rename dev_gpio_leds.h to dev-gpio-leds.hjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19407 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30ramips: cleanup WZR-AGL300NH board support filejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30ramips: register gpio-buttons on the RT-N15 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19405 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30ramips: add common gpio-buttons devicejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19404 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30ramips: register rtl8366s device on the RT-N15 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19403 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30ramips: sanitize return value of ramips_gpio_getjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19401 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30ramips: update mips multi-machine stuffjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19400 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-24[ramips] add initial support for the WZR-AGL300NH - patch by Joonas Lahtinen ↵jow
<joonas.lahtinen@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-30ramips: register ethernet device on the WHR-G300N and V22RW-2x2 boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-26ramips: move 'arch/mips/include/asm/mach-ralink/eth.h' to ↵juhosg
'drivers/net/ramips_eth.h' git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18176 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-26ramips: use definitions from rt305x_regs, and nuke the duplicated onesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-26ramips: move ramips_eth_platform_data into a separate filejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18174 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-26ramips: use resource to pass irq and base address to the ethernet driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18166 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25[ramips] fixes licensesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18152 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25ramips: nuke net_device stats from the private data of the ethernet driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18147 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25ramips: register ethernet device on the DIR-300 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25ramips: change prom code to accept 'board=FOOBAR' from the command linejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25ramips: modify {read,write}_config helpersjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18141 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-25ramips: nuke config_access helperjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18140 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 04:48:28 +0000