summaryrefslogtreecommitdiff
path: root/target/linux/ramips/files/arch
AgeCommit message (Expand)Author
2011-07-03ramips: use lowercase partiion names on the WCR150GN boardjuhosg
2011-07-03ramips: update partition map for DIR-300-B1juhosg
2011-07-03ramips: consistently use 'firmware' name for sysupgrade partitionsjuhosg
2011-07-03ramips: remove unused include from the common GPIO codejuhosg
2011-07-03ramips: update HW550-3G mtd partitionsjuhosg
2011-07-03ramips: set cp0_perfcount_irq for RT305Xjuhosg
2011-04-04ramips: initial board support for MOFI3500-3GNjuhosg
2011-03-27ramips: UPF_FIXED_TYPE must be set for the serial portsjuhosg
2011-03-27ramips: define GPIO chips separately for each SoCsjuhosg
2011-03-27ramips: move GPIO definitions into a separate header filejuhosg
2011-03-27ramips: setup GPIO chip functions on the flyjuhosg
2011-03-27ramips: use separate register base for GPIO chipsjuhosg
2011-03-27ramips: fix dir-300 mtd layoutjuhosg
2011-03-27ramips: enable MDIO on the HW550-3G boardjuhosg
2011-03-27ramips: add sysupgrade and status LED support for HW550-3Gjuhosg
2011-03-13ramips: initial board support for Aztech HW550-3Gjuhosg
2011-01-26ramips: register watchdog device on the rt288x boardsjuhosg
2011-01-26ramips: add watchdog device for RT288xjuhosg
2011-01-26ramips: register watchdog device on the rt305x boardsjuhosg
2011-01-26ramips: add watchdog device for RT305xjuhosg
2011-01-26ramips: implement clock API for RT288xjuhosg
2011-01-26ramips: implement clock API for RT305Xjuhosg
2011-01-26ramips: remove extern and __init from function prototypesjuhosg
2010-12-14ramips: handle OTG interrupt on the RT305x SoCjuhosg
2010-12-08ramips: ramips_esw: convert it to be a platform driverjuhosg
2010-12-05ramips: use tabs instead of spaces in mach-f5d8235-v2.cjuhosg
2010-11-24ramips: add support for Belkin F5D8235 v2 boardjuhosg
2010-09-27ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)juhosg
2010-08-15ramips: add support for Sparklan WCR-150GN boardjuhosg
2010-07-15ramips: register ethernet device on the RT-N15juhosg
2010-07-15ramips: add generic ethernet device for the RT288xjuhosg
2010-07-15ramips: add mdio_cfg configuration for the ethernet driverjuhosg
2010-07-13ramips: protect GPIO register access with a spinlockjuhosg
2010-05-31Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set.blogic
2010-05-28ramips: merge slab patchjuhosg
2010-05-28ramips: use COMMAND_LINE_SIZE directlyjuhosg
2010-04-22ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttonsjuhosg
2010-03-31ramips: annotate device register function prototypes with __initjuhosg
2010-03-31ramips: register wifi device for the RT2880 based boardsjuhosg
2010-03-31ramips: add wifi device for the RT2880 as welljuhosg
2010-03-30ramips: register wifi device on the rt305x based boardsjuhosg
2010-03-30The ralink rt305x board has a wireless card that can be used with the rt2800p...blogic
2010-03-30[ramips] Fix the base address of the wireless card. Otherwise it is not possi...blogic
2010-01-31ramips_eth: pass sys_clk via platform_datajuhosg
2010-01-30ramips: register gpio buttons on the Fonera 2.0N boardjuhosg
2010-01-30ramips: register gpio buttons on the WHR-G300N boardjuhosg
2010-01-30ramips: register gpio buttons on the V22RW-2x2 boardjuhosg
2010-01-30ramips: register gpio buttons on the DIR-300 revB boardjuhosg
2010-01-30ramips: fix wrong base addresses for the RT288xjuhosg
2010-01-30ramips: include 'linux/leds.h' from 'dev-gpio-leds.h'juhosg
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 19:24:45 +0000