summaryrefslogtreecommitdiff
path: root/target/linux/ramips/files/arch
AgeCommit message (Collapse)Author
2011-07-03ramips: specify eeprom file name on RT305Xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27392 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03ramips: specify eeprom file name on RT288Xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27391 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03ramips: use lowercase partiion names on the WCR150GN boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27387 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03ramips: update partition map for DIR-300-B1juhosg
Patch by Layne Edwards from #9252. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03ramips: consistently use 'firmware' name for sysupgrade partitionsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27383 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03ramips: remove unused include from the common GPIO codejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27381 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03ramips: update HW550-3G mtd partitionsjuhosg
This patch updates the mtd partitions for the Aztech HW550-3G Signed-off-by: Layne Edwards <ledwards@astrumtech.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27378 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03ramips: set cp0_perfcount_irq for RT305Xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27377 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-04ramips: initial board support for MOFI3500-3GNjuhosg
This patch adds initial board support for the MoFi Network MOFI3500-3GN (Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG). This router is basically the NA version of the HW550-3G. Signed-off-by: Layne Edwards <ledwards76@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26466 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27ramips: UPF_FIXED_TYPE must be set for the serial portsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26327 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27ramips: define GPIO chips separately for each SoCsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27ramips: move GPIO definitions into a separate header filejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26325 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27ramips: setup GPIO chip functions on the flyjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27ramips: use separate register base for GPIO chipsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27ramips: fix dir-300 mtd layoutjuhosg
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26322 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27ramips: enable MDIO on the HW550-3G boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26321 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-27ramips: add sysupgrade and status LED support for HW550-3Gjuhosg
This patch adds sysupgrade and status LED support for the Aztech HW550-3G. Some LED GPIOs were changed for clarity. Signed-off-by: Layne Edwards <ledwards76@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26320 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-13ramips: initial board support for Aztech HW550-3Gjuhosg
This patch adds initial support for the Aztech HW550-3G (Ralink RT3052f SoC, 8MB flash, 32MB dram). Ethernet is not working yet. Wireless appears to work fine. USB does not work yet (as with other Ralink boards). Signed-off-by: Layne Edwards <ledwards76@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26ramips: register watchdog device on the rt288x boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26ramips: add watchdog device for RT288xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26ramips: register watchdog device on the rt305x boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25128 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26ramips: add watchdog device for RT305xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26ramips: implement clock API for RT288xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26ramips: implement clock API for RT305Xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-26ramips: remove extern and __init from function prototypesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-14ramips: handle OTG interrupt on the RT305x SoCjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-08ramips: ramips_esw: convert it to be a platform driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-05ramips: use tabs instead of spaces in mach-f5d8235-v2.cjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24268 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24ramips: add support for Belkin F5D8235 v2 boardjuhosg
No support for usb for now. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-27ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)juhosg
The attached patch adds a preliminary support for Prolink PWH2004 board (Ralink RT305x based). LAN and flash appear to work. However, the USB port and WLAN I have not managed to activate properly yet, but that problem appears to be present with other rt305x targets as well(?). Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-15ramips: add support for Sparklan WCR-150GN boardjuhosg
This patch adds support for Sparklan WCR-150GN board. Network configuration should be tweaked to make it work fully. The reason it's not in this patch is that ramips target should be modified to support different /etc/config/network files for different boards. Signed-off-by: Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22658 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15ramips: register ethernet device on the RT-N15juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15ramips: add generic ethernet device for the RT288xjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-15ramips: add mdio_cfg configuration for the ethernet driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22211 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-13ramips: protect GPIO register access with a spinlockjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-31Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set.blogic
Signed-off-by: Helmut Schaa git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21643 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-28ramips: merge slab patchjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21607 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-28ramips: use COMMAND_LINE_SIZE directlyjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21606 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-22ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttonsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-31ramips: annotate device register function prototypes with __initjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20627 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-31ramips: register wifi device for the RT2880 based boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-31ramips: add wifi device for the RT2880 as welljuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30ramips: register wifi device on the rt305x based boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30The ralink rt305x board has a wireless card that can be used with the ↵blogic
rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-30[ramips] Fix the base address of the wireless card. Otherwise it is not ↵blogic
possible to register a platform wireless device as it overlaps with something else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20596 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-31ramips_eth: pass sys_clk via platform_datajuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30ramips: register gpio buttons on the Fonera 2.0N boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19413 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30ramips: register gpio buttons on the WHR-G300N boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19412 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30ramips: register gpio buttons on the V22RW-2x2 boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19411 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30ramips: register gpio buttons on the DIR-300 revB boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19410 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-21 02:33:24 +0000