summaryrefslogtreecommitdiff
path: root/target/linux/ramips/base-files/etc
AgeCommit message (Collapse)Author
2013-04-25ramips: introduce DTS for ALL5003blogic
Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c. With the change to DTS, this is no longer accurate, as ALL5002 is based on Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding rt5350.dtsi need to be included for ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3557/ Acked-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36435 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25ramips: Add Alpha ASL-26555 support.blogic
This board uses a TrendChip SOC with its own RAM/Flash for ADSL support. We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN. There are two versions (Chile 8MB and Spain 16MB). Wiki: http://wiki.openwrt.org/toh/alpha/asl26555 Signed-off-by: Esteban Benito <estebanjbs@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3571/ Acked-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25ramips: Add support of D-link DIR-620D1blogic
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> Acked-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36432 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09[ramips] Add Netgear WNCE2001 (OF version)blogic
Add Netgear WNCE2001. This is a small RT3052 device with 4MB spi flash and 32MB ram. 2 built-in antennas, 1x fastE, no USB, reset & wps switch. On my model the AP/RT switch is unpopulated, but I verified the gpio mapping for it. The stock firmware is running an unprotected tftpd which allows you to read any file from the filesystem. Serial port is present on testpads (See image on the wiki page). There are more testpads below the shield near the SoC, which may have JTAG. Slight annoyance: The bootloader is checksumming kernel&rootfs, but can be tricked by zeroing checksum and length fields in the checksum partition, see target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming The manufacturer image is very similar to the DAP one, so I slightly modified mkdapimg to support generating it. The resulting openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin can be used to flash from stock to OpenWRT using the stock firmware upgrade function, without using the serial port. http://www.netgear.com/landing/wnce2001.aspx http://wiki.openwrt.org/toh/netgear/wnce2001 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36289 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-05[ramips] fix dir-615 h1 network configblogic
http://patchwork.openwrt.org/patch/3527/ Signed-off-by: Daniel Petre <dani@ip6.ro> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36213 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03[ramips] add profile for tenda w150m boardblogic
http://patchwork.openwrt.org/patch/3371/ Signed-off-by: Chi Zhang <zhangchi866@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36176 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03[ramips] add Huawei D105blogic
http://patchwork.openwrt.org/patch/3510/ Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36173 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03[ramips] add profile for the Edimax 3g-6200NL boardblogic
http://patchwork.openwrt.org/patch/3214/ Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36172 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03[ramips] there is no ttyS1 consoleblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12[ramips] make sure errors get sent to /dev/nullblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35988 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11ramips: add user-space support for the Upvel UR-326N4G boardjuhosg
[juhosg: fix mac address setup] Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-18ramips: migrate to common led helper functionsjuhosg
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-16ramips: use the new macaddr_* helpers instead of maccalcjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35615 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-16ramips: use the mtd_get_mac_* helpersjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35613 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-02ramips: add user-space support for the Omnima EMB HPM boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35467 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-02ramips: add userspace support for the Edimax BR-6425juhosg
[juhosg: remove sysupgrade changes] Signed-off-by: Yuval Adam <yuv.adm@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28ramips: reset switch on single-port devicesblogic
Signed-off-by: Daniel Gole <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35356 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19ramips: add user-space support for the Tenda 3G300Mjuhosg
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35245 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-18all targets: use numerically prefixed uci-defaults file names to better ↵jow
control order of execution git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-06[ramips] adds support for Edimax BR-6524Nblogic
fixes #12754 Signed-off-by: <rq@akl.lt> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35020 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-29ramips: add user-space support for the Planex MZK-W300NH2 Routerjuhosg
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3077/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34926 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-29ramips: add user-space support for Airlive AIR3GIIjuhosg
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/2913/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34923 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-24ramips: fix wifi EEPROM extraction on DIR-615-Dx modelsjuhosg
Patch from #12636. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-22ramips: unify eeprom file name for the built-in wireless MACjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34860 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19Do not use deprecated path to functions.sh (/etc/functions.sh -> ↵mirko
/lib/functions.sh) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-10[ramips] add support for Hauppauge Broadwayblogic
This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway platform. It doesn't deal with the TV tuner or transcoder at this point, but the core functionality is working (Ethernet, wireless, USB, buttons, LEDs, etc). Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-29ramips: rt305x: add user-space support for the Asus RT-N13Ujuhosg
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-25ramips: add DIR-615 D userspace supportjuhosg
Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and Makefile changes to build images for this target. However, without the userspace bits a ramips machine can't use wifi as the necessary "eeprom" data is to be extracted by a hotplug script; also, sysupgrade support and default led configuration are missing. An IRC user reported these changes allowed him to use wifi on his hardware. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18ramips: add user-space support for TEW-691GRjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18ramips: add user-space support for the TEW-692GR boardjuhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-18ramips: add user space support for the DIR-645juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25[ramips] make uci-defaults switch detection work on rt5350blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25[ramips] unbreak port mapping detectionblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33536 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: make built-in switch transparent for ALL0256N and ALL5002juhosg
This allows them to transparently communicate with an external VLAN switch. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Add support for 8devices Carambola dev board.juhosg
Add support for 8devices Carambola dev board. The Carambola is a small RT3050-based development board with two ethernet ports, on-board chip antenna, usb and plenty of accessible gpio ports, sold by 8devices. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33303 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-29ramips: Add switch setup to uci network defaultsjuhosg
Add switch setup to uci network defaults. The 'lan' attribute is used to decide into which vlan to put the port. Currently 'disable' is never set, but the intention is to use this for devices like the 8devices Carambola, which only has two ports hooked up to the SoC. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33300 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-22ramips: add RSSI leds for uci-defaults for ALL0256Njuhosg
Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33220 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-17ramips: add board alias for the ALL0239-3Gjuhosg
Generate image for the ALL0239-3G which can be flashed through the chipset-vendor SDK based firmware's web-interface and bootloader. The bootloader seems to ignore uImage checksum errors, but does complain about them once the 0xDEADC0DE was replaced by an actual JFFS2 page. I'm working on implementing fixtrx for uImage in the mtd package to solve this. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33206 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-17ramips: add support for D-Link DIR-615 H1juhosg
rt2x00 still needs some patching as the radio doesn't come to life. Installation via webflash. [juhosg: fix whitespace issues, remove rt305x_register_usb from machine setup because the board has no USB port] Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33205 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-12ramips: add D-Link DIR-620 A1 supportjuhosg
Full functionality runtime tested, installation via OEM web-interface requires a follow-up patch. Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing bits (including the antiparallel wps led). Signed-off-by: Paul Fertser <fercerpav@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24[ramips] D-Link DAP-1350 initial supportblogic
The initial support for the D-Link DAP-1350. USB related functionality is not tested. Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24[ramips] initial LED configuration for Fonera 2.0nblogic
Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips) Signed-off-by: Malte Forkel <malte.forkel@berlin.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-24[ramips] add ALL5002 userspace supportblogic
detect EEPROM, MAC addresses and support sysupgrade for the ALL5002 Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32816 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-12ramips: rt305x: add support for Edimax 3G-6200Njuhosg
Support for Edimax 3G-6200N router with USB. Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32682 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-23ramips: mac address detection for Fonera 2.0nacinonyx
Detect and apply MAC address of a Fonera 2.0n (ramips) Signed-off-by: Malte Forkel <malte.forkel@berlin.de> Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA Routerjuhosg
This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router. The platform is based on Ralink RT3052. http://wiki.openwrt.org/toh/petatel/psr-680w Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29ramips: use the generic uci-default functions for initial LED setupjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29ramips: WAN LED for D-Link DIR-300-B1juhosg
Add led devices for D-Link DIR-300-B1 WAN LED. Note that the GPIO state is also ANDed with the esw switch port 4 LED state, which is why I've set the amber LED to default-on. Closes: https://dev.openwrt.org/ticket/11326 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> [ juhosg: - fix comment style in mach-dir-300-revb.c, - remove the PPP specific LED setup, not everyone uses a PPP connection on the WAN interface] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27ramips: make rt2x00 firmware extraction quietjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31918 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-02ramips: W306R V2.0 - GPIO and Network fixesjuhosg
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by removing a line(default is correct), and reversed the Lan/wan layout LLLLW to WLLLL. Added: image/Makefile now builds -factory.bin files. I am unsure of the accepted way to change the makefile but the name of the image needs to be 'linkn Kernel Image' in order to be accepted by the OEM firmware. Known issue: eth0 (internal switch i think has mac address: 00:11:22:33:44:55 but i think it should be same as the lan). Known issue: Pressing the reset button has no noticable effect, i would expect the router to boot failsafe if being pressed on boot, reboot if short press and reset all to default if long press. [juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead] Signed-off-by: David Pearce <david_18051985@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31557 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 10:47:13 +0000