summaryrefslogtreecommitdiff
path: root/target/linux/lantiq
AgeCommit message (Collapse)Author
2012-04-21[target/linux/lantiq] change /etc/config/network according to actual VLAN ↵mirko
config to enable LAN port 4 on the ARV4520PW board The VLAN mapping on the ARV4520PW board is the following: port on Router: | VLAN in software: LAN 1 | 3 LAN 2 | 2 LAN 3 | 1 LAN 4 | 0 DSL | 4 So LAN4 is not VLAN4 but VLAN0 (VLAN4 is DSL port) -> set "3 2 1 0 5t" as default switch config. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31391 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-17kernel: also update the targets to use 3.2.15jogo
Thanks Gabor for spotting it. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31337 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-17kernel: update linux 3.3 to 3.3.2jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31336 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-17kernel: update linux 3.2 to 3.2.15jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31335 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-16[lantiq] adds 3.3 patches and filesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-12[lantiq] update 3.2 patchesblogic
sync with lantiq kernel series git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31260 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-09kernel: update linux 3.2 to 3.2.14jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31222 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-05[lantiq] add Easybox 802 - ARV752DPWblogic
Implements the ARV752DPW architecture in mach-arv.c Signed-off-by: Christian Rustmeier <rustmeier@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31206 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-05[lantiq] enable usb on dgn3500blogic
A power-enable toggle gpio is not available, it is always on and protected with a resettable fuse. Signed-off-by: Pieter Voorthuijsen<p.voorthuijsen at gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31205 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-01kernel: update linux 3.2 to 3.2.13 and refresh patchesjogo
Also remove a duplicate patch from lantiq (already in generic). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31158 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-27ath9k: make endian check optionalnbd
Turns out it triggers on some AR71xx devices where no swapping should be done. Enable endian check for the lantiq target. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31084 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25[lantiq] cleanup atheros wifi handlingblogic
Signed-off-by: Andrej Vlašić <andrej.vlasic0@gmail.com> Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25[lantiq] cleanup image makefileblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25[lantiq] update /etc/uci-defaults/*blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25[lantiq] update profilesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31061 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25[lantiq] bump kernel to 3.2.12blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-19targets: replace madwifi in profiles with ath5k, madwifi is unmaintainednbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-14lantiq: load dwc_otg earlyjogo
Needed for using external rootfs on usb sticks. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30940 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-23[lantiq] fixes etop locking issueblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30689 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[lantiq] generate uboot environment data in targetblogic
With this patch it is possible to generate uboot environment config file inside lantiq target. Currently it is only supporting GIGASX76X board. uboot environment config is used by fw_printenv fw_setenv tools. Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30537 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[lantiq] fix compile error in previous commitblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[lantiq] Support booting the Speedport W502V using BRN-BOOT.blogic
While the disadvantage is less available flash space, it's easy and safe to flash without opening the device. Going back to the original firmware is also possible. This patch add two firmware utilities, mkbrncmdline and mkbrnboot. mkbrncmdline patches the uncompressed kernel so the registeres a0 to a3 are initialized and the memory size is passed in. mkbrnboot takes the lzma compressed kernel and squashfs images and creates a firmware image that can be flashed using the BRN-BOOT recovery kernel, which is booted by holding both buttons when powering up the device and will listen on http://192.168.2.1. The firmware file from bin/lantiq/ to use is openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage The BRN-BOOT recovery kernel does size-check the image, so if it's too big to fit into flash it will complain accordingly. A second patch is needed to make the wired network interface work since there is no u-boot to pre-initialise it. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[lantiq] fixes irq locking in ethernet driverblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30522 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[lantiq] fixes gpio_export patchblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30521 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[ltq-dsl] add annex selection support to ltq_dsl packageblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30518 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-31kernel: update linux 3.1 to 3.1.10jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29966 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-17[lantiq] gigaset 76xblogic
* fixes leds * adds all leds found on the sx763 board * removes board_config from flash layout because wireless data is stored in kernel (ath5k) * fix button handling Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29763 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-13kernel: update linux 3.1 to 3.1.9jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29726 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06linux: update 3.1 to 3.1.4jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-28lantiq: bump to 3.1.3blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29348 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-23lantiq: drop 009-MIPS-make-oprofile-use-cp0_perfcount_irq-if-it-is-se.patchblogic
This patch is/was a duplicate of generic/patches-3.1/307-mips_oprofile_fix.patch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-22lantiq:blogic
* fixes ath5k eeprom handling * fixes sx76x * adds sx76x to userland api * minor style cleanups Signed-of-by: Andrej Vlašić <andrej.vlasic0@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29292 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-15lantiq: add runtime generation of /etc/config/networkblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29161 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14lantiq: fix falcon build breakageblogic
dev-wifi-rt2x00 fails to build on falcon due to missing pci git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13linux: update 3.1 to 3.1.1jogo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12lantiq: add uci-defaults code for handling ledsblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12lantiq: add /lib/lantiq.sh and make hotplug handlers use itblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12lantiq: rename ledsblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12lantiq: split compat headers out of bsp header patchblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12lantiq: adds hotplug handler for loading rt2x00 firmwareblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12lantiq: adds hotplug handler for handling buttons and makes w303v work with itblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12lantiq: cleanup default package selectionblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how ↵blogic
to use it git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-11lantiq: improve falcon package selectionblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28962 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-11lantiq: fix breakage introduced in 3.1 bumpblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28961 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-03lantiq: remove obseleted folder. we use 3.1 nowblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28728 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-03lantiq: bump to 3.1blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28721 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-10[lantiq]blogic
* update patches to 3.0 * add basic vr9 support * backport 3.1 fixes * backport 3.2 queue (falcon) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28405 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-26[lantiq-wdt]blogic
The enable function was using the global timeout variable for local operations. This resulted in the value of the global variable being corrupted, thus breaking the code. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28310 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-26[lantiq]blogic
* remove obseleted m25p80 patch git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28309 3c298f89-4303-0410-b956-a3cf2f4a3e73