summaryrefslogtreecommitdiff
path: root/target/linux/lantiq
AgeCommit message (Collapse)Author
2013-04-19kernel: update linux 3.8 to 3.8.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36363 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-14kernel: update linux 3.8 to 3.8.7juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36332 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-11[lantiq] add VG3503J supportblogic
this adds basic support. the bootloader on these units is locked down. until we have a replacement we can do basic testing with these env variables in uboot. set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize) set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000 unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle. please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides. Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-11[lantiq] add FE phy firmwareblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-11[lantiq] add missing pinmux patchblogic
Fix lantiq pinmux which affected PCI and USB. Known affected boards are: ARV4518 and ARV7518. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36312 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09Adapt default network configuration for IPv6cyrus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-06kernel: update linux 3.8 to 3.8.6juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03[lantiq] Migrate lantiq platform to common led helper functionsblogic
http://patchwork.openwrt.org/patch/3316/ Signed-off-by: Michael Heimpold <mhei@heimpold.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36187 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03[lantiq] add a missing patch that makes board detection work againblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-15kernel: update linux 3.8 to 3.8.3juhosg
Also refresh the related generic/platform patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36039 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14[lantiq] ACMP252: fix USB-enable GPIO and use default PCI configuration for nowblogic
EEPROM is an actial serial EEPROM on the WiFi module, therefore we can remove ralink_eep from the dts. USB power-enable GPIO turned out to be GPIO #3 (found via probing/brute-force). PCI works with default settings as long as the vendor bootloader is used. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36030 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14[lantiq] fix buttons on vr9 eval kitblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36029 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14[lantiq] select vdsl packages on vr9 boardsblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36028 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14[lantiq] fix fritzbox 3370 partitions/memory/cmdlineblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36027 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14[lantiq] build jffs images for nand based fritzboxblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14[lantiq] bump to v3.8blogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36014 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14[lantiq] move GPHY FW blobs to non versioned folderblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12[lantiq] fixes NO_XIP on CFI0001 flashblogic
This patch disables the execute-in-place (XIP) support for flash on lantiq. This has to be disabled since the bus which flash is connected to does not support unaligned accesses. Resolves data bus errors on Lantiq routers with Intel command set flash. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12[lantiq] add support for AudioCodes AC-252blogic
user-space support for extracting the EEPROM for the RaLink WiFi is still missing. Besides this, it's all working. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12[lantiq] unbreak dgn3500 spi-gpioblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-03kernel: update linux 3.7 to 3.7.10juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35860 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-17kernel: update linux 3.7 to 3.7.9juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35644 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-15kernel: update linux 3.7 to 3.7.8juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-12kernel: update linux 3.7 to 3.7.7juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-04kernel: update linux 3.7 to 3.7.6juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35476 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-29kernel: update linux 3.7 to 3.7.5juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35390 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28[lantiq] dont load gptu on aseblogic
fixes #12792 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35357 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28[lantiq] refresh patchesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35355 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28[lantiq] Fix ARV7518 USBblogic
This patch correctly fixes USB on Lantiq ARV7518. There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/). Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35354 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28[lantiq] Add ath9k eeprom and pci fixup supportblogic
Add ath9k eeprom and pci fixup support (again) for linux 3.7. On linux 3.3, the fixup forced the regdomain to 0x67, causing low TX power. This patch only corrects checksum, the rest of the EEPROM isn't changed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35353 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28[lantiq] Add support for ARV4518PW R01 and rename R01A.blogic
There are two different versions of SMC7908A-ISP: R01 and R01A. R01 has an internal clock for PCI, meanwhile R01A has an external clock. This fixes: https://dev.openwrt.org/ticket/12884 Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35352 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-27kernel: clean up crypto related kconfig optionsnbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35327 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-24kernel: update linux 3.7 to 3.7.4juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35318 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-18all targets: use numerically prefixed uci-defaults file names to better ↵jow
control order of execution git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-18kernel: update linux 3.7 to 3.7.3juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35216 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-12kernel: update linux 3.7 to 3.7.2juhosg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-10[lantiq] fixes USB reset on ARV7518blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35077 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-09[lantiq] fixes none-pci buildblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-30[lantiq] adds missing symbolblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34939 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-30[lantiq] fixes usb port on arv 4518blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-28mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel ↵nbd
size after lzma and ~12k squashfs size in the default configuration git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34909 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-22[lantiq] ar9 did not load atm driver properlyblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21[lantiq] dont use input layer for gpio buttonsblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34839 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21[lantiq] default switch setup for WBMRblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34838 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21[lantiq] Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii ↵blogic
seems to fix the communication issues with the ar8316 switch. (ticket #11143) Tested only on the wbmr-hp-g300h, could affect/break other devices. Signed-off-by: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21[lantiq] adds script to set wps info on boards with a wps buttonblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34836 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21[lantiq] minor tweaks to WBMR imageblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21[lantiq] add missing PHY_BASIC_FEATURES to 100mbit physblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34826 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21[lantiq] fix typo inside fritz3370 devicetree fileblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21[lantiq] more devicetree fixesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34824 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 01:54:18 +0000