summaryrefslogtreecommitdiff
path: root/target/linux/lantiq/image
AgeCommit message (Collapse)Author
2013-08-06lantiq: add (incomplete) support for Aztech GR7000luka
*) can not connect to switch chip *) only one usb port is working *) wifi is not working Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37712 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-25lantiq: add TP-Link TDW8970 image generationblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37543 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-25lantiq: fix initramfs image generation for lzmaloader based imagesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-05lantiq: add device tree support for arv4519pwluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37178 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-03lantiq: fix initramfsluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37143 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25lantiq: move dts files to thir own folderblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25lantiq: make lzma-loader based images for VG3503Jblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36440 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25lantiq: update VG3503J.dts to match new partition layoutblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36439 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25lantiq: add lzma-loader sourceblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36438 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-11[lantiq] add VG3503J supportblogic
this adds basic support. the bootloader on these units is locked down. until we have a replacement we can do basic testing with these env variables in uboot. set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize) set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000 unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle. please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides. Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36315 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14[lantiq] ACMP252: fix USB-enable GPIO and use default PCI configuration for nowblogic
EEPROM is an actial serial EEPROM on the WiFi module, therefore we can remove ralink_eep from the dts. USB power-enable GPIO turned out to be GPIO #3 (found via probing/brute-force). PCI works with default settings as long as the vendor bootloader is used. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36030 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14[lantiq] fix buttons on vr9 eval kitblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36029 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14[lantiq] fix fritzbox 3370 partitions/memory/cmdlineblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36027 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-14[lantiq] build jffs images for nand based fritzboxblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12[lantiq] fixes NO_XIP on CFI0001 flashblogic
This patch disables the execute-in-place (XIP) support for flash on lantiq. This has to be disabled since the bus which flash is connected to does not support unaligned accesses. Resolves data bus errors on Lantiq routers with Intel command set flash. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12[lantiq] add support for AudioCodes AC-252blogic
user-space support for extracting the EEPROM for the RaLink WiFi is still missing. Besides this, it's all working. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-12[lantiq] unbreak dgn3500 spi-gpioblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28[lantiq] Fix ARV7518 USBblogic
This patch correctly fixes USB on Lantiq ARV7518. There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/). Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35354 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28[lantiq] Add ath9k eeprom and pci fixup supportblogic
Add ath9k eeprom and pci fixup support (again) for linux 3.7. On linux 3.3, the fixup forced the regdomain to 0x67, causing low TX power. This patch only corrects checksum, the rest of the EEPROM isn't changed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35353 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28[lantiq] Add support for ARV4518PW R01 and rename R01A.blogic
There are two different versions of SMC7908A-ISP: R01 and R01A. R01 has an internal clock for PCI, meanwhile R01A has an external clock. This fixes: https://dev.openwrt.org/ticket/12884 Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35352 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-10[lantiq] fixes USB reset on ARV7518blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35077 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-30[lantiq] fixes usb port on arv 4518blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-22[lantiq] ar9 did not load atm driver properlyblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21[lantiq] minor tweaks to WBMR imageblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21[lantiq] fix typo inside fritz3370 devicetree fileblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21[lantiq] more devicetree fixesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34824 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19[lantiq] more board file fixesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-16[lantiq] add falcon devicetree filesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34711 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-15[lantiq] EASY80920 has 2 usb portsblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34701 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-15[lantiq] add devicetreesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34691 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-15[lantiq] add linux-v3.7blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34687 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09[lantiq] a few more dts files (WIP)blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06[lantiq] add support for arv7525blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02[lantiq] adds dts files and make devicetree images buildableblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31[lantiq] add lantiq svip supportblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32925 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05[lantiq] clean up generic image buildingblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27[lantiq] Add basic configuration for new board ZTE H201L. Still missing are ↵blogic
button and led gpio values. Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15[lantiq] adds zyxel p2601hnfx supportblogic
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25[lantiq] cleanup image makefileblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25[lantiq] bump kernel to 3.2.12blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[lantiq] Support booting the Speedport W502V using BRN-BOOT.blogic
While the disadvantage is less available flash space, it's easy and safe to flash without opening the device. Going back to the original firmware is also possible. This patch add two firmware utilities, mkbrncmdline and mkbrnboot. mkbrncmdline patches the uncompressed kernel so the registeres a0 to a3 are initialized and the memory size is passed in. mkbrnboot takes the lzma compressed kernel and squashfs images and creates a firmware image that can be flashed using the BRN-BOOT recovery kernel, which is booted by holding both buttons when powering up the device and will listen on http://192.168.2.1. The firmware file from bin/lantiq/ to use is openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage The BRN-BOOT recovery kernel does size-check the image, so if it's too big to fit into flash it will complain accordingly. A second patch is needed to make the wired network interface work since there is no u-boot to pre-initialise it. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-19add support for more lantiq AR9 boardsblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-17[lantiq]blogic
* add gigasx76x update * rebase patches * add arv752DPW arv7525PD * fixes gpio_keys Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27665 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07fix generation of falcon images for profilesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07replace all references to xway with danubeblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27538 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07fix lantiq image makefile to represent new split between ar9 and danubeblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27537 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03update lantiq/falcon patchesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-12[lantiq]blogic
* move patches around * add basic support for gigaset sx76x git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27158 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-08[lantiq]blogic
* fixes spi flash for ar9 * adds limited support for netgear dgn3500 (enough for others to start working with) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-29[lantiq]blogic
* backport 2.6.8 patches to .39 / .32.33 * remove lqtapi * bump tapi/dsl to .39 * migrate to new ltq_ style api * add amazon_se support git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27026 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-26 08:53:14 +0000