summaryrefslogtreecommitdiff
path: root/target/linux/lantiq/image
AgeCommit message (Collapse)Author
2013-01-28[lantiq] Fix ARV7518 USBblogic
This patch correctly fixes USB on Lantiq ARV7518. There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/). Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35354 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28[lantiq] Add ath9k eeprom and pci fixup supportblogic
Add ath9k eeprom and pci fixup support (again) for linux 3.7. On linux 3.3, the fixup forced the regdomain to 0x67, causing low TX power. This patch only corrects checksum, the rest of the EEPROM isn't changed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35353 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-28[lantiq] Add support for ARV4518PW R01 and rename R01A.blogic
There are two different versions of SMC7908A-ISP: R01 and R01A. R01 has an internal clock for PCI, meanwhile R01A has an external clock. This fixes: https://dev.openwrt.org/ticket/12884 Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35352 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-10[lantiq] fixes USB reset on ARV7518blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35077 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-30[lantiq] fixes usb port on arv 4518blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-22[lantiq] ar9 did not load atm driver properlyblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21[lantiq] minor tweaks to WBMR imageblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21[lantiq] fix typo inside fritz3370 devicetree fileblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34825 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21[lantiq] more devicetree fixesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34824 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-19[lantiq] more board file fixesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-16[lantiq] add falcon devicetree filesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34711 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-15[lantiq] EASY80920 has 2 usb portsblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34701 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-15[lantiq] add devicetreesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34691 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-15[lantiq] add linux-v3.7blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34687 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-09[lantiq] a few more dts files (WIP)blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34130 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-06[lantiq] add support for arv7525blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-02[lantiq] adds dts files and make devicetree images buildableblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34064 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31[lantiq] add lantiq svip supportblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32925 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05[lantiq] clean up generic image buildingblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27[lantiq] Add basic configuration for new board ZTE H201L. Still missing are ↵blogic
button and led gpio values. Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15[lantiq] adds zyxel p2601hnfx supportblogic
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25[lantiq] cleanup image makefileblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31063 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-25[lantiq] bump kernel to 3.2.12blogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[lantiq] Support booting the Speedport W502V using BRN-BOOT.blogic
While the disadvantage is less available flash space, it's easy and safe to flash without opening the device. Going back to the original firmware is also possible. This patch add two firmware utilities, mkbrncmdline and mkbrnboot. mkbrncmdline patches the uncompressed kernel so the registeres a0 to a3 are initialized and the memory size is passed in. mkbrnboot takes the lzma compressed kernel and squashfs images and creates a firmware image that can be flashed using the BRN-BOOT recovery kernel, which is booted by holding both buttons when powering up the device and will listen on http://192.168.2.1. The firmware file from bin/lantiq/ to use is openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage The BRN-BOOT recovery kernel does size-check the image, so if it's too big to fit into flash it will complain accordingly. A second patch is needed to make the wired network interface work since there is no u-boot to pre-initialise it. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-19add support for more lantiq AR9 boardsblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-17[lantiq]blogic
* add gigasx76x update * rebase patches * add arv752DPW arv7525PD * fixes gpio_keys Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27665 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07fix generation of falcon images for profilesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07replace all references to xway with danubeblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27538 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-07fix lantiq image makefile to represent new split between ar9 and danubeblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27537 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03update lantiq/falcon patchesblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-12[lantiq]blogic
* move patches around * add basic support for gigaset sx76x git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27158 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-08[lantiq]blogic
* fixes spi flash for ar9 * adds limited support for netgear dgn3500 (enough for others to start working with) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-29[lantiq]blogic
* backport 2.6.8 patches to .39 / .32.33 * remove lqtapi * bump tapi/dsl to .39 * migrate to new ltq_ style api * add amazon_se support git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-29[lantiq]blogic
* fix ARV7518PW support git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26354 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-14[lantiq]blogic
* fixes arv4510 board support * fixes nor swizzle hack * fixes gpio .can_sleep * fixes compile warning inside pci driver git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26157 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-11[lantiq]blogic
* update kernel to .37 * add support for falcon (big thank you goes to lantiq !!) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26021 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-04[lantiq]blogic
* adds ath5k platform support * adds several new profiles git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25367 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-01[lantiq]blogic
* adds profiles to the kernel * fixes 2 compile errors in the usb driver * ioports were not allocated properly git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-23[lantiq]blogic
* adds arv4518pw mach support * fixes arv4525pw * make sure all mach names have the same style * move code around git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25075 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-23[lantiq] adds machtype for ARV7518PWblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25074 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-23[lantiq] blogic
* fix pci support for more than 1 device * fixes ioport mappings * adds support for arcor easybox 803/arv752DWP22 * gpio direction was not set properly during a gpio_request() * usb compile warning bugfix, cleanup, git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25072 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-12[lantiq] adds new lantiq kernel. once the codebase is fully tested and know ↵blogic
to be working on all the devices previously supported by ifxmips, we will drop ifxmips support. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24526 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 03:49:17 +0000